B81141C1333M [EPCOS]
EMI Suppression Capacitors; EMI抑制电容器
| 型号： | B81141C1333M |
| 厂家： | 
EPCOS |
| 描述： | EMI Suppression Capacitors |
| 文件： | 总4页 (文件大小：123K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EMI Suppression Capacitors
X1 / 440 Vac
B 81 141
X1 capacitors
Rated ac voltage 440 V, 50/60 Hz
Construction
ꢀ Dielectric: polyester (MKT)
ꢀ Internal series connection
ꢀ Plastic case (UL 94 V-0)
ꢀ Epoxy resin sealing, flame-retardant
Features
ꢀ Self-healing properties
Terminals
Lead spacing Lead diameter Lead length l1
ꢀ Parallel wire leads, tinned
ꢀ Two standard lead lengths available:
6 mm and 26 mm
0,4
≤ 27,5 mm
37,5 mm
∅d (mm)
0,8
(mm)
6 − 1 26
6 − 1 26
2
2
Other lead lengths available upon request.
1,0
Marking
Manufacturer’s logo, lot number,
date code,
rated capacitance (coded),
AAAAA C1154
XX-µ15 M 440V~
capacitance tolerance (code letter),
rated ac voltage, type number,
interference suppression sub-class (X1),
style (MKT), self-healing (SH), climatic category,
awarded marks of conformity.
B81141 X1 MKT/SH
40/085/21/C
IEC 384
250V~ 250V~
14 (2)
KMK0568-H
Delivery mode
Bulk (untaped)
Taped (Ammo pack or reel)
For notes on taping, refer to chapter “Taping and packing”, page 274.
Marks of conformity
Marks of
Standards
Certificate
conformity
EN 132 400, IEC 384-14, 2nd edition
UL 1414 (250 V)
9547071-01
E 97863
CSA C22.2 No. 0; 8 (250 V)
LR 59709
228 12/00
B 81 141
440 Vac
X1
Ordering codes and packing units
Lead
spacing
CR
Maximum
dimensions
b × h × l
(mm)
Ordering code1)
Packing units (pcs)
Ammo Reel
pack
Untaped
Lead length
0,4
mm
15
6 mm
26 mm
10 nF
22 nF
33 nF
47 nF
5,0 × 10,5 × 18,0 B81141-C1103-M
7,0 × 12,5 × 18,0 B81141-C1223-M
8,5 × 14,5 × 18,0 B81141-C1333-M
9,0 × 17,5 × 18,0 B81141-C1473-M
1170
830
680
640
1300
900
700
700
1000
1000
500
1000
800
500
500
***
***
***
***
500
22,5
27,5
37,5
68 nF
8,5 × 16,5 × 26,5 B81141-C1683-M
480
390
370
500
400
350
510
540
510
450
350
300
***
***
***
0,10 µF 10,5 × 16,5 × 26,5 B81141-C1104-M
0,15 µF 11,0 × 20,5 × 26,5 B81141-C1154-M
0,22 µF 12,5 × 21,5 × 31,5 B81141-C1224-M
0,33 µF 14,0 × 24,5 × 31,5 B81141-C1334-M
0,47 µF 18,0 × 27,5 × 31,5 B81141-C1474-M
–
–
–
300
280
260
200
200
150
100
***
***
***
–
–
0,68 µF 16,0 × 28,5 × 41,5 B81141-C1684-M
–
–
100
–
***
Capacitance tolerance: 20 % =ˆ M (closer tolerances upon request)
Technical data
Climatic category
40/085/21
in accordance with IEC 60068-1
Lower category temperature Tmin
− 40 °C
Upper category temperature Tmax + 85 °C
Passive flammability category
in accordance with IEC 40 (CO) 752 C
Damp heat test
21 days/40 °C/93 % relative humidity
Limit values after damp
heat test
Capacitance change |∆C/C|
≤ 5 %
Dissipation factor change ∆ tan δ ≤ 5 ⋅ 10−3 (at 1 kHz)
Insulation resistance Ris
≥ 50 % of minimum
or time constant τ = CR ⋅ Ris
as-delivered values
Permissible
440 V (50/60 Hz)
continuous ac voltage
Permissible continuous dc voltage 1000 V
DC test voltage
2500 V, 2 s
1) Replace the *** by the code number for the required lead length or packing.
000 = lead length 6 mm (untaped)
026 = lead length 26 mm (untaped)
289 = taped, Ammo pack
189 = taped, reel
229 12/00
X1
B 81 141
440 Vac
Technical data
Dissipation factor tan δ (in 10−3
at 20 °C
(upper limit values)
)
CR ≤ 0,1 µF 0,1 µF < CR ≤ 1 µF CR > 1 µF
8
at
1 kHz
8
15
–
10
–
10 kHz 15
100 kHz 30
–
Insulation resistance Ris
CR ≤ 0,33 µF
30 000 MΩ
CR > 0,33 µF
10 000 s
or time constant τ = CR ⋅ Ris
at 20 °C, rel. humidity ≤ 65 %
(minimum as-delivered values)
Impedance Z
versus frequency f
(typical values)
Pulse handling capability
Maximum permissible voltage change per unit of time for non-sinusoidal voltages (pulse, sawtooth).
VR
Max. rate of voltage rise Vpp/τ in V/µs (for Vpp = VˆR)
Lead spacing
15 mm
80
22,5 mm
50
27,5 mm
30
37,5 mm
15
440 Vac
For Vpp < VˆR, the permissible voltage rise rate Vpp/τ may be multiplied by the factor VˆR/Vpp
.
Also refer to the calculation example in chapter “General technical information”, page 302.
VR
Pulse characteristic k0 in V2/µs (for Vpp ≤ VˆR)
Lead spacing
15 mm
22,5 mm
50 000
27,5 mm
30 000
37,5 mm
18 000
440 Vac
100 000
230 12/00
Herausgegeben von EPCOS AG
Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und
Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG
nicht gestattet.
Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften
zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen
für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgele-
genen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland.
Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte
darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsge-
sellschaft einzuholen.
Published by EPCOS AG
Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this bro-
chure and the information contained therein without EPCOS’ prior express consent is prohibited.
The information contained in this brochure describes the type of component and shall not be con-
sidered as guaranteed characteristics. Purchase orders are subject to the General Conditions for
the Supply of Products and Services of the Electrical and Electronics Industry recommended by the
ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
1
相关型号：
©2020 ICPDF网 联系我们和版权申明