B82422A1392K258 [EPCOS]
General Purpose Inductor, 3.9uH, 10%, 1 Element, Ferrite-Core, SMD, ROHS COMPLIANT;
| 型号： | B82422A1392K258 |
| 厂家： | 
EPCOS |
| 描述： | General Purpose Inductor, 3.9uH, 10%, 1 Element, Ferrite-Core, SMD, ROHS COMPLIANT |
| 文件： | 总9页 (文件大小：211K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SMT inductors
SIMID series, SIMID 1210-100
Series/Type:
B82422A*100
Date:
June 2008
EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SMT inductors, SIMID series
SIMID 1210-100
B82422A*100
Size 1210 (EIA) or 3225 (IEC)
Rated inductance 0.0082 H to 100 H
Rated current 65 mA to 800 mA
Construction
■ Ceramic or ferrite core
■ Laser-welded winding
■ Flame-retardant molding
Features
■ Temperature range up to 145 °C
■ High Q factor
■ High resonance frequency
■ Suitable for lead-free reflow soldering
as referenced in JEDEC J-STD 020C
■ RoHS-compatible
Applications
■ Filtering of supply voltages, coupling, decoupling
■ Antenna systems
■ Automotive electronics
■ Telecommunications
■ Consumer and data processing equipment
■ Industrial electronics
Terminals
■ Base material CuSn6
■ Layer composition Cu, Ag, Sn (lead-free)1)
■ Electro-plated
Marking
■ Marking on component:
Manufacturer, L value (in nH),
tolerance of L value (coded), date of manufacture (YWWD)
■ Minimum data on reel:
Manufacturer, ordering code, L value,
quantity, date of packing
Delivery mode and packing units
■ 8-mm blister tape, wound on 180-mm or 330-mm reel
■ Packing units:
180-mm reel: 2000 pcs./reel
330-mm reel: 8000 pcs./reel
1) Ni-barrier-plated terminals on request (B82422A*150).
Please read Cautions and warnings and
Important notes at the end of this document.
2
06/08
SMT inductors, SIMID series
SIMID 1210-100
B82422A*100
Dimensional drawing and layout recommendation
0.5±0.21)
B
C
D
B
IND0053-6
3.2+0.3
A
B
C
D
2.7
1.15
2.1
4.4
2.5+0.3
0.15 max.
Marking
1) Soldering area
IND0073-6-E
Dimensions in mm
Taping and packing
Blister tape
Reel
12.75+0.15
4±0.1
_0
14.4 max.
Component
1.5+0.1
2±0.05
8.4+1.5
_0
62±1.5
_
<
4±0.1
2.6
1.0+0.2
Direction of unreeling
IND0592-V
IND0559-Z-E
Dimensions in mm
Please read Cautions and warnings and
Important notes at the end of this document.
3
06/08
SMT inductors, SIMID series
SIMID 1210-100
B82422A*100
Technical data and measuring conditions
Rated inductance LR
Q factor Qmin
Measured with impedance analyzer Agilent 4294A
at frequency fL, 0.1 V, 20 °C
Measured with impedance analyzer Agilent 4294A
at frequency fQ, 20 °C
Rated temperature TR
Rated current IR
125 °C
Maximum permissible DC with inductance decrease
ΔL/L0 ≤ 10% and temperature increase
of ≤ 20 K at rated temperature
Self-resonance frequency fres,min
DC resistance Rmax
Measured with network analyzer Agilent 8753D, 20 °C
Measured at 20 °C
Solderability (lead-free)
Sn95.5Ag3.8Cu0.7: (245 ±5) °C, (5 ±0.3) s
Wetting of soldering area ≥ 90%
(based on IEC 60068-2-58)
Resistance to soldering heat
Climatic category
260 °C, 40 s (as referenced in JEDEC J-STD 020C)
55/125/56 (to IEC 60068-1)
Storage conditions
Mounted: –55 °C … +125 °C
Packaged: –25 °C … +40 °C, ≤ 75% RH
Weight
Approx. 50 mg
Please read Cautions and warnings and
Important notes at the end of this document.
4
06/08
SMT inductors, SIMID series
SIMID 1210-100
B82422A*100
Characteristics and ordering codes
LR
Tolerance
fL
Qmin
fQ
IR
Rmax
fres, min Ordering code1)2)
(
180-mm reel)
μH
MHz
MHz
mA
Ω
MHz
Core material: ceramic
^
0.0082 ±5%
J
10
10
10
10
10
10
10
10
10
10
10
10
10
10
1
20
20
25
27
30
30
23
20
25
26
26
27
27
25
22
25
25
25
20
22
22
22
22
22
22
100
100
100
100
100
100
50
800
750
700
640
640
600
600
540
530
510
500
480
450
440
400
390
360
280
235
200
190
150
150
145
140
0.08
0.09
0.10
0.12
0.12
0.14
0.14
0.17
0.18
0.19
0.20
0.21
0.24
0.26
0.32
0.33
0.38
0.64
0.90
1.3
4000
4000
3500
3000
2500
2500
1850
1700
1450
1350
1200
1150
1050
1000
880
B82422A3829+100
B82422A3100+100
B82422A3120+100
B82422A3150+100
B82422A3180+100
B82422A3220+100
B82422A3270+100
B82422A3330+100
B82422A3390+100
B82422A3470+100
B82422A3560+100
B82422A3680+100
B82422A3820+100
B82422A3101+100
B82422A3121+100
B82422A3151+100
B82422A3181+100
B82422A3221+100
B82422A3271+100
B82422A3331+100
B82422A3391+100
B82422A3471+100
B82422A3561+100
B82422A3681+100
B82422A3821+100
^
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
±10%
K
50
50
50
50
50
50
50
0.12
30
0.15
1
30
850
0.18
1
30
800
0.22
1
30
700
0.27
1
30
650
0.33
1
30
580
0.39
1
30
1.4
540
0.47
1
30
2.2
480
0.56
1
30
2.2
400
0.68
1
30
2.4
280
0.82
1
30
2.5
240
Closer tolerances and special versions on request.
Higher currents possible at temperatures <TR on request.
Sample kit available. Ordering code: B82422X100
For more information refer to chapter “Sample kits”.
1) Replace the + by the code letter for the required inductance tolerance.
For reel size 330 mm the last digit has to be an »8«. Example: B82422A3829K108
2) For Ni-barrier-plated terminals replace the last three digits “100” by “150” (reel 180 mm) or “158” (reel 330 mm).
Please read Cautions and warnings and
Important notes at the end of this document.
5
06/08
SMT inductors, SIMID series
SIMID 1210-100
B82422A*100
Characteristics and ordering codes
LR
Tolerance
fL
Qmin
fQ
IR
Rmax
fres, min Ordering code1)2)
(
180-mm reel)
μH
MHz
MHz
mA
Ω
MHz
Core material: ferrite
^
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
±5%
J
1
20
20
20
25
25
25
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
380
370
340
290
270
240
200
190
150
140
135
130
180
175
165
155
140
120
105
90
0.34 320
0.37 300
0.50 270
0.60 250
0.75 125
0.88 110
1.20 110
1.40 110
2.20 110
2.60 100
B82422A1102+100
B82422A1122+100
B82422A1152+100
B82422A1182+100
B82422A1222+100
B82422A1272+100
B82422A1332+100
B82422A1392+100
B82422A1472+100
B82422A1562+100
B82422A1682+100
B82422A1822+100
B82422A1103+100
B82422A1123+100
B82422A1153+100
B82422A1183+100
B82422A1223+100
B82422A1273+100
B82422A1333+100
B82422A1393+100
B82422A1473+100
B82422A1563+100
B82422A1683+100
B82422A1823+100
B82422A1104+100
^
1
±10%
K
1
1
1
1
1
1
1
1
1
2.80
3.00
1.60
1.65
1.85
2.00
2.65
3.70
4.50
6.30
7.00
6.75
7.70
90
90
25
23
20
17
16
15
13
12
11
9
1
10
1
12
15
18
22
27
33
39
47
56
68
82
100
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
85
85
80
9
70
10.0
11.5
8
65
7
Closer tolerances and special versions on request.
Higher currents possible at temperatures <TR on request.
Sample kit available. Ordering code: B82422X100
For more information refer to chapter “Sample kits”.
1) Replace the + by the code letter for the required inductance tolerance.
For reel size 330 mm the last digit has to be an »8«. Example: B82422A1104K108
2) For Ni-barrier-plated terminals replace the last three digits “100” by “150” (reel 180 mm) or “158” (reel 330 mm).
Please read Cautions and warnings and
Important notes at the end of this document.
6
06/08
SMT inductors, SIMID series
SIMID 1210-100
B82422A*100
Impedance |Z| versus frequency f
measured with impedance analyzer
Agilent 4291A, typical values at 20 °C
Inductance L versus DC load current IDC
measured with LCR meter Agilent 4275A,
typical values at 20 °C
Q factor versus frequency f
Current derating Iop/IR
measured with impedance analyzer Agilent
4194A/4291A, typical values at 20 °C
versus ambient temperature TA
(rated temperature TR = 125 °C)
7
06/08
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
8
06/08
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with
them than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very
high level of operational safety and especially in customer applications in which the malfunction
or failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of
the customer application or other action taken by the customer (e.g. installation of protective
circuitry or redundancy) that no injury or damage is sustained by third parties in the event of
malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue,
MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are
trademarks registered or pending in Europe and in other countries. Further information will be
found on the Internet at www.epcos.com/trademarks.
9
03/09
相关型号：
B82422A1393J258
General Purpose Inductor, 39uH, 5%, 1 Element, Ferrite-Core, SMD, ROHS COMPLIANT
EPCOS
B82422A1393K258
General Purpose Inductor, 39uH, 10%, 1 Element, Ferrite-Core, SMD, ROHS COMPLIANT
EPCOS
©2020 ICPDF网 联系我们和版权申明