B82496C3180-000 [EPCOS]
SMT inductors; SMT电感器
| 型号： | B82496C3180-000 |
| 厂家： | 
EPCOS |
| 描述： | SMT inductors |
| 文件： | 总8页 (文件大小：484K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SMT inductors
SIMID series, SIMID 0603-C
Series/Type:
B82496C
Date:
October 2012
a~í~=pÜÉÉí
@ꢀEPCOS AG 2012. Reproduction, publication and dissemination of this publication, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SMT inductors, SIMID series
SIMID 0603-C
B82496C
Size 0603 (EIA) and/or 1608 (IEC)
Rated inductance 1 ... 220 nH
Rated current 110 ... 1800 mA
Construction
■ Copper-plated ceramic core
■ Laser-cut winding, epoxy-coated
Features
■ Temperature range up to +150 °C
■ High resonance frequency
■ Close inductance tolerance
■ Free of polarization effect
■ High mechanical stability
■ Qualified to AEC-Q200
■ Suitable for lead-free reflow soldering
as referenced in JEDEC J-STD 020D
■ RoHS-compatible
Applications
Resonant circuits, impedance matching for
■ Multimedia
■ Car access systems
■ Wireless communication systems
■ TPMS (Tire Pressure Monitoring System)
■ GPS (Global Positioning System)
■ Digital cameras
Terminals
■ Base material Al2O3 ceramic with Cu layer
■ Layer composition Ni, Sn (lead-free)
■ Electro-plated
Marking
■ No marking on component
■ Minimum data on reel:
Manufacturer, ordering code, L value,
quantity, date of packing
Delivery mode and packing unit
■ 8-mm cardboard tape, wound on 180-mm # reel
■ Bulk case on request
■ Packing unit: 4000 pcs./reel
Please read Cautions and warnings and
Important notes at the end of this document.
2
10/12
SMT inductors, SIMID series
SIMID 0603-C
B82496C
Dimensional drawing and layout recommendation
0.3 0.2
0.3 0.2
C
B
0.8 0.1
1.6 0.1
IND0042-K
IND0041-C
B
C
A
0.8 ꢁ0.1
2.3 ꢁ0.3
0.9 ꢁ0.1
Dimensions in mm
Taping and packing
Cardboard tape
Reel
4 0.1
1.5+0.1
_0
0.95 0.05
2 0.05
_
<
4 0.1
Direction of unreeling
1.1 0.1
1.15
IND0553-H-E
Dimensions in mm
Please read Cautions and warnings and
Important notes at the end of this document.
3
10/12
SMT inductors, SIMID series
SIMID 0603-C
B82496C
Technical data and measuring conditions
Rated inductance LR
Measured with impedance analyzer Agilent 4291A
and test fixture Agilent 16196A at frequency fL, 0.1 V,
+20 °C
Q factor Qmin, Qtyp
Measured with impedance analyzer Agilent 4291A
and test fixture Agilent 16196A,
Qmin measured at frequency fQ, +20 °C
Rated temperature TR
Rated current IR
+125 ꢂC
Maximum permissible DC with a temperature increase
of ꢃ 15 K at rated temperature
Self-resonance frequency fres,min
DC resistance Rmax
Measured with network analyzer Agilent 8720D, +20 °C
Measured at +20 °C
Solderability (lead-free)
Sn95.5Ag3.8Cu0.7: +(245 ꢁ5) °C, (5 ꢁ0.3) s
Wetting of soldering area ꢄ 95%
(based on IEC 60068-2-58)
Resistance to soldering heat
Climatic category
+260 ꢂC, 40 s (as referenced in JEDEC J-STD 020D)
55/150/56 (to IEC 60068-1)
Storage conditions
Mounted: –55 °C … +150 °C
Packaged: –25 °C … +40 °C, ꢃ 75% RH
Weight
Approx. 4 mg
Please read Cautions and warnings and
Important notes at the end of this document.
4
10/12
SMT inductors, SIMID series
SIMID 0603-C
B82496C
Characteristics and ordering codes
LR
Tolerance
Qmin Qtyp
(at
fL; fQ
IR
Rmax
fres,min Ordering code1)2)
(reel packing)
GHz
nH
800 MHz) MHz
mA
ꢅ
^
1.0
ꢁ0.3 nH A
7
8
60
60
50
50
50
40
40
40
40
40
40
40
40
40
40
40
40
35
35
35
35
35
35
35
30
30
30
25
25
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1800
1800
1500
1500
1500
1400
1200
1100
800
700
700
650
600
450
420
400
380
360
350
300
270
250
230
220
200
160
130
120
110
0.02
16
B82496C3109+000
B82496C3129+000
B82496C3159+000
B82496C3189+000
B82496C3229+000
B82496C3279+000
B82496C3339+000
B82496C3399+000
B82496C3479+000
B82496C3569+000
B82496C3689+000
B82496C3829+000
B82496C3100+000
B82496C3120+000
B82496C3150+000
B82496C3180+000
B82496C3220+000
B82496C3270+000
B82496C3330+000
B82496C3390+000
B82496C3470+000
B82496C3560+000
B82496C3680+000
B82496C3820+000
B82496C3101+000
B82496C3121+000
B82496C3151+000
B82496C3181+000
B82496C3221+000
^
ꢁ0.2 nH Z
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
0.025 15
0.03 13
8
12
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
5
0.033 12
0.035 10
0.04
0.06
0.065
0.10
0.15
0.15
0.18
0.20
0.35
0.40
0.45
0.50
0.55
0.60
0.80
0.95
1.2
10
9
^
ꢁ5% J
8
^
ꢁ0.2 nH Z
7
6
6
6
^
10
ꢁ5% J
5
^
ꢁ2% G
12
15
5
4.5
18
4.0
4.0
3.0
3.0
2.5
2.5
2.5
2.0
2.0
1.8
1.8
1.6
1.4
1.3
22
27
33
39
47
56
68
1.3
82
1.5
100
120
150
180
220
1.8
25.2
3.0
5
25.2
25.2
25.2
5.0
4
6.0
4
7.0
Special versions on request.
Higher currents possible at temperatures <TR on request.
Sample kit available (see also chapter “Sample kits”. Ordering code: B82496X001
1) Replace the + by the code letter for the required inductance tolerance.
2) For bulk case the last digit has to be a »1«. Example: B82496C3109A001
Please read Cautions and warnings and
Important notes at the end of this document.
5
10/12
SMT inductors, SIMID series
SIMID 0603-C
B82496C
Impedance |Z| versus frequency f
measured with impedance analyzer
Agilent 4291A/16196A, typical values at +20 °C
Inductance L versus DC load current IDC
measured with LCR meter Agilent 4275A,
typical values at +20 °C
IND0043-T
_6
IND0045-5
105
10
nH
B82496C
B82496C
Ω
104
220 nH
L
|Z|
100 nH
10 nH
1 nH
_7
_8
_9
103
102
101
10
10
10
100
220 nH
100 nH
10 nH
1 nH
_1
10
_2
10
10
_3
106
_10
10
_2
_1
107
108
Hz 109
10
10
100
A
101
f
IDC
Q factor versus frequency f
Current derating Iop/IR
measured with impedance analyzer
versus ambient temperature TA
Agilent 4291A/16196A, typical values at +20 °C
(rated temperature TR = +125 °C)
IND0046-L-E
IND0044-2
1.2
100
B82496C
90
B82496C
Iop
IR
Q
1 nH
1.0
80
70
0.8
0.6
0.4
0.2
0
60
10 nH
50
40
30
20
10
220 nH
109
100 nH
Hz 1010
0
107
108
0
20 40 60 80 100 120
C 160
TA
f
6
10/12
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
7
10/12
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of an electronic component could endanger human life or health (e.g.
in accident prevention or life-saving systems), it must therefore be ensured by means of suitable
design of the customer application or other action taken by the customer (e.g. installation of
protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information will
be found on the Internet at www.epcos.com/trademarks.
8
10/12
相关型号：
B82496C3180G000
General Purpose Inductor, 0.018uH, 2%, 1 Element, Ceramic-Core, SMD, 0603, ROHS COMPLIANT
TDK
B82496C3180G001
General Purpose Inductor, 0.018uH, 2%, 1 Element, Ceramic-Core, SMD, 0603, ROHS COMPLIANT
TDK
B82496C3180J001
1 ELEMENT, 0.018uH, CERAMIC-CORE, GENERAL PURPOSE INDUCTOR, SMD, ROHS COMPLIANT
EPCOS
©2020 ICPDF网 联系我们和版权申明