B85121-A2105-A250 [EPCOS]
250V, 50 HZ, AC FEED THROUGH CAPACITOR;型号: | B85121-A2105-A250 |
厂家: | EPCOS |
描述: | 250V, 50 HZ, AC FEED THROUGH CAPACITOR |
文件: | 总11页 (文件大小:69K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EMC Components
Feed-Through Capacitors
Feed-Through Filters
in Solderless MKP Technology
Data Sheet
Feed-Through Capacitors
Feed-Through Filters
B85121
B85321
1
General
MeshContact is a solderless technology newly developed by Siemens Matsushita Components. It
allows uniform concentric contacting of MKP capacitor winds, avoiding the thermal stress caused
by soldering. The result is even better insertion loss, high insulation resistance plus compact, small
casing.
Basically, feed-through components can be used to suppress interference in all electrical installa-
tions and equipment. The new series is also ideal for telephone switching systems and base sta-
tions and, through broadband suppression effective into the GHz region, prevents interference puls-
es from entering equipment from outside through the power supply network and vice versa.
There is now a building-block system available in this new technology for feed-through capacitors
and filters, allowing fast and attractively priced solutions to be implemented. Interim ratings can be
produced to order for special applications.
Feed-through elements fitted into a shielding wall
Selector guide
Diameter
30 mm
Voltage range
up to 75 A
up to 500 A
Capacitance range
0,1 … 1 µF
55 mm
0,5 … 4,7 µF
3
05/00
Feed-Through Capacitors
Feed-Through Filters
B85121
B85321
In feed-through capacitors the conductor carrying the load current is connected concentrically to
one electrode and passes through the center of the capacitor. The other electrode makes concentric
contact with the capacitor case.
Feed-through capacitors are designed to be effective from low frequency to far above 300 MHz. The
low-loss winding with high-stability contact to the leads at its face ends is enclosed in a metal case
with either a threaded stud at one end or an external thread.
Feed-through filters have π filter circuits consisting of two equal shunt capacitors and one ferro-
magnetic inductor connected in series. Due to the concentric arrangement of the components, high
attenuation values are obtained for frequencies up to and exceeding 1 GHz.
Safety note!
If feed-through elements with high capacitances are used, protective measures (e.g. protective
earthing) in accordance with equipment/system regulations (product standards) are required!
2
Mounting instructions
To fully utilize their RF characteristics, feed-through components must be fitted directly into the
shielding wall. The component case must make perfect and unbroken (RF-tight!) contact with the
shielding. This can be best achieved by screwing them into a threaded hole or bushing, so that good
electrical contact is made by the flanks of the thread.
As an alternative, feed-through elements can be screwed into feed-through holes in a shielding wall
and held by a retaining nut. Contact between the case and the shielding wall is produced by the
contact surface on the thread.
The connecting line must be attached by fixing it between two countered nuts in order to avoid ex-
posing the component to torque loads (use two spanners).
NOTE
Due to the danger of exposing the feed throughs to mechanical loads caused by shock and
vibration, it is not permissible to use rigid copper bars as connecting elements.
4
05/00
Feed-Through Capacitors
Feed-Through Filters
B85121
B85321
Construction
■ Building-block system
■ MKP technology (dry, self-healing)
Dielectric: polypropylene, metallized
■ Metal case with synthetic resin terminals
■ For central screw fixing
Features
■ Compact dimensions
■ Variable current rating and capacitance
through building-block system
■ High attenuation
■ Simple fitting
■ High contact reliability through
central screw fixing
Applications
Broadband interference suppression
for ac/dc supply lines, e.g. in
■ shielded rooms
■ telephone exchanges, base stations
■ electrical machines and systems
■ power supplies
Terminals
■ Threaded studs
Marking
Manufacturer, ordering code, EMI suppression class,
rated capacitance, rated voltage, rated current,
climatic category, circuit diagram, date of manufacture (MM.YY)
Standards
Feed-through capacitors comply with EN 133 200
Feed-through filters comply with EN 133 400
Safety information
Due to the high capacitance ratings protective measures (e.g. protective earthing)
in accordance with equipment/system regulations are required.
Circuit diagrams
SSB1275-J
SSB1274-B
Feed-through filters
Feed-through capacitors
5
05/00
Feed-Through Capacitors
B85121
Feed-through capacitors 30 mm
IR
A
CR
µF
VR
Vac
VP
Vdc
Ter-
minal
Dimensions (mm)
× l l 1
Ordering code
Vdc
600
600
600
600
600
600
25
0,1
0,5
1,0
0,1
0,5
1,0
250
250
250
250
250
250
3000
2500
2000
3000
2500
2000
M6
M6
M6
M6
M6
M6
30 × 55 110
30 × 55 110
30 × 55 110
30 × 55 110
30 × 55 110
30 × 55 110
B85121-A2104-A250
B85121-A2504-A250
B85121-A2105-A250
B85121-A2104-A750
B85121-A2504-A750
B85121-A2105-A750
75
Insertion loss (dB); typical values at 50 Ω
Capacitance CR
0,1 µF
10 kHz
100 kHz
1 MHz
20
10 MHz
40
100 MHz
1 GHz
> 70
0
2
5
5
15
25
60
80
85
0,5 µF
35
40
> 90
1,0 µF
45
50
> 90
General technical data
Capacitance tolerance:
IEC climatic category:
Screw cap fixing:
± 20 %
40/085/56 (– 40 °C/+ 85 °C, 56 days damp heat test)
standard M20 × 1
Dimensional drawing
Marking
5
l
l1
SSB1271-L
6
05/00
Feed-Through Capacitors
B85121
Feed-through capacitors 55 mm
IR
CR
VR
VP
Ter-
Dimensions (mm)
Ordering code
A
µF
Vac
Vdc
600
600
600
600
600
600
600
600
600
600
600
600
Vdc
minal
× l
l 1
63
0,5
1,0
2,0
4,7
0,5
1,0
2,0
4,7
0,5
1,0
2,0
4,7
250
250
250
250
250
250
250
250
250
250
250
250
3000
2500
2500
2000
3000
2500
2500
2000
3000
2500
2500
2000
M 6
M 6
M 6
M 6
M 8
M 8
M 8
M 8
M10
M10
M10
M10
55 × 30
55 × 30
55 × 60
55 × 60
55 × 30
55 × 30
55 × 60
55 × 60
55 × 30
55 × 30
55 × 60
55 × 60
100
100
130
130
110
110
140
140
120
120
150
150
B85121-A2504-A630
B85121-A2105-A630
B85121-A2205-A630
B85121-A2475-A630
B85121-A2504-A101
B85121-A2105-A101
B85121-A2205-A101
B85121-A2475-A101
B85121-A2504-A201
B85121-A2105-A201
B85121-A2205-A201
B85121-A2475-A201
100
200
Insertion loss (dB); typical values at 50 Ω
Capacitance CN
0,5 µF
10 kHz
100 kHz
15
1 MHz
10 MHz
40
100 MHz
> 80
1 GHz
> 90
> 90
> 90
> 90
2
5
35
45
50
55
1,0 µF
25
50
> 85
2,0 µF
10
15
30
55
> 90
4,7 µF
35
65
> 90
7
05/00
Feed-Through Capacitors
General technical data
B85121
Capacitance tolerance:
IEC climatic category:
Screw cap fixing
± 20 %
40/085/56 (– 40 °C/+ 85 °C, 56 days damp heat test)
standard M32 × 1,5;
special fixing M27 × 1,5 possible.
Dimensional drawing
SW41
Marking
24 min.
8
55±1
15+1
l
56
l 1
SSB1272-U
8
05/00
Feed-Through Filters
B85321
Feed-through filters 30 mm
IR
CR
VR
VP
Ter-
Dimensions (mm)
Ordering code
A
µF
Vac
Vdc
600
600
500
600
600
500
Vdc
minal
× l
l 1
25
2 × 0,1 250
2 × 0,5 250
2 × 1,0 250
2 × 0,1 250
2 × 0,5 250
2 × 1,0 250
3000
2000
1700
3000
2000
1700
M6
M6
M6
M6
M6
M6
30 × 81
30 × 81
30 × 81
30 × 81
30 × 81
30 × 81
130
130
130
130
130
130
B85321-A2204-A250
B85321-A2105-A250
B85321-A2205-A250
B85321-A2204-A750
B85321-A2105-A750
B85321-A2205-A750
75
Insertion loss (dB); typical values at 50 Ω, load-independed
Capacitance CN
2 × 0,1 µF
10 kHz
100 kHz
10
1 MHz
25
10 MHz
70
100 MHz
> 100
1 GHz
> 100
> 100
> 100
2
5
2 × 0,5 µF
25
45
80
> 100
2 × 1,0 µF
10
30
60
90
> 100
General technical data
Capacitance tolerance:
IEC climatic category:
screw cap fixing:
± 20 %
40/085/56 (– 40 °C/+ 85 °C, 56 days damp heat test)
standard M20 × 1
Dimensional drawing
Marking
5
l
l1
SSB1271-L
9
05/00
Feed-Through Filters
B85321
Feed-through filters 55 mm
IR
CR
VR
VP
Ter-
Dimensions (mm)
Ordering code
A
µF
Vac
Vdc
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
Vdc
minal
× l
l 1
63
2 × 0,5 250
2 × 1,0 250
2 × 2,0 250
2 × 4,7 250
2 × 0,5 250
2 × 1,0 250
2 × 2,0 250
2 × 4,7 250
2 × 0,5 250
2 × 1,0 250
2 × 2,0 250
2 × 4,7 250
2 × 0,5 250
2 × 1,0 250
2 × 2,0 250
2 × 4,7 250
2 × 0,5 250
2 × 1,0 250
2 × 2,0 250
2 × 4,7 250
2 × 0,5 250
2 × 1,0 250
2 × 2,0 250
2 × 4,7 250
3000
2500
2500
1650
3000
2500
2500
1650
3000
2500
2500
1650
3000
2500
2500
1650
3000
2500
2500
1650
3000
2500
2500
1650
M 6
M 6
M 6
M 6
M 8
M 8
M 8
M 8
M10
M10
M10
M10
M12
M12
M12
M12
M16
M16
M16
M16
M18
M18
M18
M18
55 × 100
55 × 100
55 × 100
55 × 100
55 × 100
55 × 100
55 × 100
55 × 100
55 × 100
55 × 100
55 × 100
55 × 100
55 × 100
55 × 100
55 × 100
55 × 100
55 × 130
55 × 130
55 × 130
55 × 130
55 × 130
55 × 130
55 × 130
55 × 130
166
166
166
166
180
180
180
180
185
185
185
185
195
195
195
195
245
245
245
245
250
250
250
250
B85321-A2105-A630
B85321-A2205-A630
B85321-A2405-A630
B85321-A2945-A630
B85321-A2105-A101
B85321-A2205-A101
B85321-A2405-A101
B85321-A2945-A101
B85321-A2105-A201
B85321-A2205-A201
B85321-A2405-A201
B85321-A2945-A201
B85321-A2105-A301
B85321-A2205-A301
B85321-A2405-A301
B85321-A2945-A301
B85321-A2105-A401
B85321-A2205-A401
B85321-A2405-A401
B85321-A2945-A401
B85321-A2105-A501
B85321-A2205-A501
B85321-A2405-A501
B85321-A2945-A501
100
200
300
400
500
Insertion loss (dB); typical values at 50 Ω, load-independed
Capacitance CN
2 × 0,5 µF
10 kHz
5
100 kHz
25
1 MHz
45
10 MHz
80
100 MHz
> 100
1 GHz
> 100
> 100
> 100
> 100
>
2 × 1,0 µF
10
30
60
> 100
> 100
> 100
> 100
2 × 2,0 µF
15
35
70
> 100
2 × 4,7 µF
25
40
90
> 100
10 05/00
Feed-Through Filters
General technical data
B85321
Capacitance tolerance:
IEC climatic category:
Screw cap fixing:
± 20 %
40/085/56 (– 40 °C/+ 85 °C, 56 days damp heat test)
standard M32 × 1,5
special fixing M27 × 1,5 possible for filters up to 300 A.
Dimensional drawing
SW41
Marking
15 min.
15 min.
8
55±1
15+1
45_
l
3
l1
SSB1273-3
11 05/00
Published by EPCOS AG
Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this bro-
chure and the information contained therein without EPCOS’ prior express consent is prohibited.
The information contained in this brochure describes the type of component and shall not be con-
sidered as guaranteed characteristics. Purchase orders are subject to the General Conditions for
the Supply of Products and Services of the Electrical and Electronics Industry recommended by the
ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
相关型号:
©2020 ICPDF网 联系我们和版权申明