EG-2102CA [EPSONTOYOCOM]

CRYSTAL OSCILLATOR; 晶体振荡器
EG-2102CA
型号: EG-2102CA
厂家: EPSON TOYOCOM    EPSON TOYOCOM
描述:

CRYSTAL OSCILLATOR
晶体振荡器

振荡器 晶体振荡器
文件: 总2页 (文件大小:413K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Crystal oscillator  
Epson Toyocom  
Product Number (please contact us)  
EG-2121CA: Q3805CAx0xxxx00  
EG-2102CA: Q3806CA00xxxx00  
CRYSTAL OSCILLATOR  
LOW-JITTER SAW OSCILLATOR  
EG- 2121  
/
2102CA series  
Frequency range  
Supply voltage  
:
:
:
:
:
:
53.125 MHz to 700 MHz  
2.5 V (EG-2121CA)  
3.3 V (EG-2102CA)  
Differential LV-PECL or LVDS  
Output enable(OE)  
Output  
Function  
Thickness  
1.2 mm Typ.  
Actual size  
Very low jitter and low phase noise by SAW unit.  
EG-2102CA  
EG-2121CA  
Specifications (characteristics)  
EG-2121CA  
EG-2102CA  
EG-2121CA  
EG-2102CA  
LVDS  
Item  
Symbol  
Remarks  
Differential LV-PECL  
53.125 MHz to  
500 MHz  
2.5 V ±0.125 V  
100 MHz to  
700 MHz  
Please contact us for inquiries regarding  
available frequencies.  
Output frequency range  
Supply voltage  
53.125 MHz to 700 MHz  
f
0
V
CC  
3.3 V ±0.3 V 2.5 V ±0.125 V 3.3 V ±0.3 V  
Storage temperature  
-40 °C to +100 °C  
Store as bare product after unpacking  
T_stg  
Temperature  
range  
Operating temperature  
P:0 °C to +70 °C ,R:-5 °C to +85 °C ,S:-20 °C to +70 °C  
G: ± 50 × 10-6 ,H: ±100 × 10-6  
Please contact us for inquiries about S spec.  
T_use  
f_tol  
I
Frequency tolerance  
Current consumption  
Disable current  
Symmetry  
P:0 °C to +70 °C,R:-5 °C to +85 °C  
*1  
80 mA Max.  
20 mA Max.  
100 mA Max.  
32 mA Max  
30 mA Max  
20 mA Max  
45 mA Max.  
30 mA Max.  
OE=V ,R  
OE=GCNCD  
L=50 or 100 Ω  
I_CdCis  
SYM  
P:45 % to 55 % P:45 % to 55 % L:45 % to 55 % L:45 % to 55 %  
f0=350 MHz (at outputs crossing point) *1  
1.55 V Typ.  
2.35 V Typ.  
VOH  
V
CC-1.025 V to VCC-0.88 V  
DC characteristics  
0.8 V Typ.  
1.6 V Typ.  
VOL  
V
CC-1.81 V to VCC-1.62 V  
Output voltage  
V
OD  
VOD  
OS  
VOS  
350 mV Typ. 247 mV to 454 mV Differential output, DC characteristics  
50 mV  
Output change, DC characteristics  
V
1.25 V Typ. 1.125 V to 1.375 V Offset, DC characteristics  
150 mV  
Offset change, DC characteristics  
LV-PECL: Terminated to VCC -2.0 V  
LVDS: Connected between OUT to OUT  
OE terminal  
Output load condition  
RL  
50 Ω  
100 Ω  
Output enable input voltage  
Output disable input voltage  
V
IH  
IL  
70 % VCC Min.  
V
30 % VCC Max.  
400 ps Max.  
OE terminal  
LV-PECL: 80 % to 20 % (V -VOL  
)
LVDS: 80 % to 20 % (VOD×O2H)  
Time at minimum supply voltage to be 0 s  
Deterministic Jitter  
Rise time / Fall time  
Start-up time  
t
r
/
t
f
t_str  
10 ms Max.  
0.2 ps Typ.  
t
tRDJJ  
3 ps Typ.  
Random Jitter  
Jitter *2  
t
RMS  
3 ps Typ.  
σ (RMS of total distribution)  
Peak to Peak  
t
25 ps Typ.  
tpac-pc  
4 ps Typ.  
Accumulated Jitter(σ) n=2 to 50000 cycles  
0.05 × 10-3 UI Typ.  
1 ps Max.  
Phase Jitter  
t
PJ  
Offset frequency: 12 kHz to 20 MHz  
Frequency aging *3  
*1 As per below table.  
f_aging  
± 10 × 10-6 / year Max.  
+25 °C,First year,VCC=2.5 V,3.3 V  
*2 Based on DTS-2075 Digital timing system made from WAVECREST with jitter analysis software VISI6.  
*3 Except: ***A  
Output mode  
P:Differential LV-PECL  
All range  
D: Differential LV-PECL  
L:LVDS  
V:LVDS  
EG-2121CA  
EG-2102CA  
f
175 MHz  
350 MHz  
f0  
0
Frequency  
All range  
f
0
175 MHz  
range  
50 ± 10 %(  
f
> 350 MHz)  
EG-2121CA  
EG-2102CA  
50 ± 10 %(f > 350 MHz)  
50 ± 5 %(f 0  
Symmetry  
50 ± 5 %(f 0  
0 350 MHz)  
50 ± 2 %  
50 ± 2 %  
0
350 MHz)  
50 ± 5 %  
Details of frequency tolerance  
A
*4  
N
*5  
A
*4  
N
*5  
A
*4  
N
*5  
A
*4  
N *5  
HP: ±100 × 10-6(0°C to +70°C)  
PHPA  
PHPN  
PHRN*6  
PGPN*6  
PGRN*6  
DHPA  
DHRA*6  
DGPA*6  
DHPN  
DHRN*6  
DGPN*6  
DGRN*6  
LHPA  
LHPN  
VHPA  
VHPN  
VHRN*6  
VGPN*6  
VGRN*6  
HR: ±100 × 10-6(-5°C to +85°C)  
GP: ±50 × 10-6(0°C to +70°C)  
GR: ±50 × 10-6(-5°C to +85°C)  
PHRA*6  
PGPA*6  
LHRA*6  
LGPA*6  
LHRN*6  
LGPN*6  
LGRN*6  
VHRA*6  
VGPA*6  
Frequency  
tolerance  
*4 This includes initial frequency tolerance, temperature variation, supply voltage variation, reflow drift, and aging(+25 °C,10 years).  
*5 This includes initial frequency tolerance, temperature variation, supply voltage variation, and reflow drift(except aging).  
*6 53.125 MHz f0 < 100 MHz : Unavailable.  
External dimensions  
(Unit:mm)  
Footprint (Recommended)  
(Unit:mm)  
1.4  
#6  
#5  
#4  
1.6  
#4  
#5  
#6  
#1  
Pin map  
Pi n  
Connection  
OE  
E EG-2121  
250.000P  
GPA 282A  
1
2
3
4
5
6
N.C.  
GND  
OUT  
OU T  
#2  
#3  
CC  
#1  
V
#3  
#2  
5.08  
2.54  
7.0±0.2  
2.54  
#3 is connected to the cover.  
5.08  
5.08  
http://www.epsontoyocom.co.jp  
“QMEMS” EPSON TOYOCOM  
In order to meet customer needs in a rapidly advancing digital,  
Quartz devices have become crucial in the network environment where  
products are increasingly intended for broadband, ubiquitous applications  
and where various types of terminals can transfer information almost  
immediately via LAN and WAN on a global scale. Epson Toyocom  
Corporation addresses every single aspect within a network environment.  
The new corporation offers “Digital Convergence” solutions to problems  
arising with products for consumer use, such as, core network systems  
and automotive systems.  
broadband and ubiquitous society, we are committed to offering products  
that are one step ahead of the market and a rank above the rest in quality.  
To achieve our goals, we follow a “3D (three device) strategy” designed to  
drive both horizontal and vertical growth. We will to grow our three device  
categories of “Timing Devices”, ”Sensing Devices” and “Optical Devices”,  
and expand vertical growth through a combination of products from these  
categories.  
A Quartz MEMS is any high added value quartz device that exploits the  
characteristics of quartz crystal material but that is produced using MEMS  
(micro-electro-mechanical system) processing technology.  
Market needs are advancing faster than previously imagined toward  
smaller, more stable crystal products, but we will stay ahead of the curve  
by rolling out products that exceed market speed and quality  
requirements. We want to further accelerate the 3D strategy by QMEMS.  
PROMOTION OF ENVIRONMENTAL MANAGEMENT SYSTEM  
CONFORMING TO INTERNATIONAL STANDARDS  
the Plan-Do-Check-Action(PDCA) cycle designed to achieve  
continuous improvements. The environmental management  
system (EMS) operates under the ISO 14001 environmental  
management standard.  
At Epson Toyocom, all environmental initiatives operate under  
ISO 14000 is an international standard for environmental management  
that was established by the International Standards Organization in 1996  
against the background of growing concern regarding global warming,  
destruction of the ozone layer and global deforestation  
All of our major manufacturing and non-manufacturing sites,in Japan and overseas, completed the acquisition of ISO 14001 certification.  
In the future, new group companies will be expected to acquire the certification around the third year of operations.  
WORKING FOR HIGH QUALITY  
In order provide high quality and reliable products and services than meet customer needs,  
Epson Toyocom made early efforts towards obtaining ISO9000 series certification and has acquired ISO9001 for all business establishments in Japan  
and abroad. We have also acquired ISO/TS 16949 certification that is requested strongly by major automotive manufacturers as standard.  
ISO/TS 16949 is a global standard based on QS-9000, a severe standard  
corresponding to the requirements from the automobile industry.  
QS-9000 is an enhanced standard for quality assurance systems  
formulated by leading U.S. automobile manufacturers based on the  
international ISO 9000 series.  
Explanation of the mark that are using it for the catalog  
Pb free.  
Complies with EU RoHS directive.  
Pb free terminal designed. Contains Pb in products exempted by RoHS directive.  
(Contains Pb in sealing glass, high melting temperature type solder or other.)  
Complies with EU RoHS directive.  
The products have been designed for high reliability applications such as Automotive.  
Notice  
This material is subject to change without notice.  
Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of Epson To yo c o m .  
The information, applied circuitry, programming, usage, etc., written in this material is intended for reference only. Epson Toyocom does not  
assume any liability for the occurrence of infringing on any patent or copyright of a third party. This material does not authorize the licensing for  
any patent or intellectual copyrights.  
Any product described in this material may contain technology or the subject relating to strategic products under the control of the Foreign  
Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of International Trade and Industry or other  
approval from another government agency.  
You are requested not to use the products (and any technical information furnished, if any) for the development and/or manufacture of weapon  
of mass destruction or for other military purposes. You are also requested that you would not make the products available to any third party  
who may use the products for such prohibited purposes.  
These products are intended for general use in electronic equipment. When using them in specific applications that require extremely high  
reliability, such as the applications stated below, you must obtain permission from Epson Toyocom in advance.  
/ Space equipment (artificial satellites, rockets, etc.) / Transportation vehicles and related (automobiles, aircraft, trains, vessels, etc.)  
/ Medical instruments to sustain life / Submarine transmitters / Power stations and related / Fire work equipment and security equipment  
/ traffic control equipment / and others requiring equivalent reliability.  
In this new crystal master for Epson Toyocom, product codes and markings will remain as previously identified prior to the merger.  
Due to the on-going strategy of gradual unification of part numbers, please review product codes and markings, as they will change during the  
course of the coming months.  
We apologize for the inconvenience, but we will eventually have a unified part numbering system for Epson Toyocom that will be user friendly.  

相关型号:

EG-2102CA 100.0000M-DGPAB

OSC SO 100MHZ LVPECL SMD
EPSON

EG-2102CA 100.0000M-DGPNB

OSC SO 100MHZ LVPECL SMD
EPSON

EG-2102CA 100.0000M-DGPNL3

OSC SO 100.000MHZ LVPECL SMD
EPSON

EG-2102CA 100.0000M-DHPAB

OSC SO 100MHZ LVPECL SMD
EPSON

EG-2102CA 100.0000M-DHPAL3

OSC SO 100.000MHZ LVPECL SMD
EPSON

EG-2102CA 100.0000M-DHRAB

OSC SO 100MHZ LVPECL SMD
EPSON

EG-2102CA 100.0000M-HGPAB

OSC SO 100MHZ HCSL SMD
EPSON

EG-2102CA 100.0000M-HGPAL3

OSC SO 100.000MHZ HCSL SMD
EPSON

EG-2102CA 100.0000M-HGPNB

OSC SO 100MHZ HCSL SMD
EPSON

EG-2102CA 100.0000M-HGPNL3

OSC SO 100MHZ HCSL SMD
EPSON

EG-2102CA 100.0000M-HGRNB

OSC SO 100MHZ HCSL SMD
EPSON

EG-2102CA 100.0000M-HGSNL3

OSC SO 100.000MHZ HCSL SMD
EPSON