S2D13782 [EPSON]

Image Enhancement IC with LCD Backlight Control Function; 图像增强IC与LCD背光控制功能
S2D13782
型号: S2D13782
厂家: EPSON COMPANY    EPSON COMPANY
描述:

Image Enhancement IC with LCD Backlight Control Function
图像增强IC与LCD背光控制功能

CD
文件: 总2页 (文件大小:562K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
S2D13782  
Image Enhancement IC with LCD Backlight Control Function  
OVERVIEW  
The S2D13782 is an image enhancement IC that meets the quality requirements for in-vehicle ICs. It has color correction,  
noise reduction, edge enhancement (sharpness) and other features. The S2D13782 also generates LCD panel control  
signals and incorporates a backlight control function.  
The Auto Movie Enhancement 2 Extended – Optimizer (AME2EX-OPT) can reduce the power consumption by 30% to  
50% by adjusting the backlight of the LCD panel to an optimum luminous intensity. In conjunction with backlight control,  
AME2EX-OPT can display colorful images with a high contrast by automatically adjusting input images to optimum  
brightness, contrast, gamma curves and color saturation.  
The color management function of the Auto Movie Enhancement 2 Extended - Color Converter Engine (AME2EX-CCE)  
allows color hue and saturation to be freely adjusted in manual mode so that colors can be reproduced faithfully according to  
the characteristics of the LCD panel connected.  
The Noise Canceller and Color Expander (NCX) reduces block noise specific to digital images such as 1-Seg broadcasting,  
and gradation noise that is likely to occur when input images have low gradations (16-bit, 18-bit).  
Adaptive Sharpness (ADS) automatically identifies the text and image areas of input images and performs optimal edge  
enhancement processing for each area.  
For the CPU interface, either I2C or SPI (3-line/4-line) can be selected. For the image I/O interface, the 16/18/24-bit RGB  
interface, 16-bit YUV interface or 8-bit YUV interface (ITU-R BT.656) can be selected. Moreover, to support LCDs that  
require special horizontal/vertical synchronous signals, the S2D13782 incorporates a programmable timing controller that  
generates timing signals for up to 10 lines.  
The S2D13782 allows the drive capability of the output terminals for the LCD panel to be selected, the quality of output  
signal waveforms can be optimized. It also incorporates a Spread Spectrum Clock Generator (SSCG), which greatly  
contributes to reducing the amount of electromagnetic interference (EMI) radiated by the display system.  
„ FEATURES  
y Image correction function  
y CPU interface  
Can be selected from I2C and SPI (3-line/4-line).  
y PWM  
AME2EX (Auto Movie Enhancement 2 Extended)  
OPT: Color correction adapted for input images  
(brightness, contrast, color saturation, and gamma curves)  
CCE: Color management (color hue and saturation)  
SGAM: RGB independent gamma correction  
NCX(Noise Canceller and Color Expander)  
Reduces block nose, gradation noise and dot noise.  
ADS (Adaptive Sharpness):  
Input PWM 1ch for photo sensors  
Output PWM 1ch for LCD control (input PWM + input image  
adaptation. Pulses can be output in manual mode.)  
y Other  
Unused pins can be used for GPIO.  
Built-in SPI-Master (3-line/4-line) for LCD control  
Edge enhancement (sharpness) adapted for text and  
images  
y Clock  
Max. 40 MHz, Built-in SSCG  
y Power supply  
Core: 1.80 ± 0.15V, IO: 1.65 to 3.60V  
y Package  
QFP15-100 (14x14x1.7mm, 100pin, 0.5mm pitch)  
PCM (Pseudo Color Mode):  
Pseudo gradation processing (24-bit 16/18-bit  
conversion)  
y Image I/O interface  
Can be selected from the 16/18/24-bit RGB interface, 16-bit  
YUV interface or 8-bit YUV interface (ITU-R BT.656).  
„ CONNECTION EXAMPLES  
Example 1: LCD display correction  
Timing signal  
Control signal (I2C or SPI)  
Image signal (RGB 24bit)  
Image signal (RGB 24bit)  
LED  
CPU  
S2D13782  
power supply  
PWM  
LED  
Driver  
PWM  
Photo  
sensor  
Color TFT LCD  
High-quality images can be produced while keeping the  
consumption current of the backlight to a minimum.  
Example 2: Camera image correction  
Control signal (I2C or SPI)  
Image signal (ITU-R BT.656)  
CPU  
Image signal (ITU-R BT.656)  
S2D13782  
Backlight control and brightness settings  
VGA Camera  
S2D13782  
„ IMAGE CORRECTION EXAMPLES  
AME2EX-OPT (Backlight control and brightness settings)  
Corrected images, backlight 50%  
Original images, backlight 100%  
NCX, ADS (Reduced block noise and improved text visibility)  
Corrected images  
Original images  
NOTICE:  
No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson.  
Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind  
arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no  
representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license  
to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in  
accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may  
contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan  
and may require an export license from the Ministry of Economy, Trade and Industry or other approval from another government agency.  
All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies.  
Seiko Epson Corporation 2011, All rights reserved  
EPSON semiconductor website  
http://www.epson.jp/device/semicon_e/  
MICRODEVICES OPERATIONS DIVISION  
Device Sales & Marketing Department  
421-8 Hino, Hino-shi, Tokyo 191-8501, JAPAN  
Phone: +81-42-587-5814 FAX: +81-42-587-5117  
Document code: 412189200  
First issue September, 2011 in Japan  
H
2

相关型号:

S2D13P04

Multi Camera Interface ICs
EPSON

S2D13P04B00B100-240

CAMERA INTERFACE CHIP WITH 4 CHA
SEIKO

S2D13P04F00A100

IC GRAPHIC LCD CTRLR 100LQFP
SEIKO

S2D13P04F00A100-90

CAMERA INTERFACE CHIP WITH 4 CHA
SEIKO

S2D13R

2-3W, High Isolation DIP, Single & Dual Output DC/DC Converters
MINMAX

S2D13R

S2D00R SERIES 2 - 3 WATT HIGH / IN ISOLATION DIP DC/DC CONVERTERS SINGLE AND DUAL OUTPUT
TOTAL-POWER

S2D1426

POWER DIVIDERS 0ì : 2-WAY
SYNERGY

S2D14R

2-3W, High Isolation DIP, Single & Dual Output DC/DC Converters
MINMAX

S2D14R

S2D00R SERIES 2 - 3 WATT HIGH / IN ISOLATION DIP DC/DC CONVERTERS SINGLE AND DUAL OUTPUT
TOTAL-POWER

S2D15R

2-3W, High Isolation DIP, Single & Dual Output DC/DC Converters
MINMAX

S2D15R

S2D00R SERIES 2 - 3 WATT HIGH / IN ISOLATION DIP DC/DC CONVERTERS SINGLE AND DUAL OUTPUT
TOTAL-POWER

S2D16R

S2D00R SERIES 2 - 3 WATT HIGH / IN ISOLATION DIP DC/DC CONVERTERS SINGLE AND DUAL OUTPUT
TOTAL-POWER