2215-G111-P1F1-S0-0.5A [ETAL]

Control equipment, communications systems, instrumentation;


型号：	2215-G111-P1F1-S0-0.5A
厂家：	ETAL Group
描述：	Control equipment, communications systems, instrumentation
文件：	总4页 (文件大小：207K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Thermal-Magnetic Circuit Breaker 2215-L.../G...

Description

Miniaturised single pole thermal-magnetic circuit breakers with trip-free

mechanism and toggle actuation (S-type TM CBE to EN 60934). Two

designs provide the option of either printed circuit board or threadneck

panel mounting. A separate shunt tap terminal and auxiliary contacts

are available. Fast acting, medium or long delay characteristics can be

specified for both models.

Suitable for use in distribution rails – see section Power Distribution

Systems.

Complies with CBE standard EN 60934 (IEC 60935).

Typical applications

2215-L1..

Technical data

2215-G1...

Control equipment, communications systems, instrumentation.

Suitable for mounting on Euro cards.

Ordering information 2215-G1

Voltage rating

AC 250 V (50/60 Hz); DC 50 V

(UL: AC 250 V; DC 75 V)

Type No.

2215 single pole thermal-magnetic circuit breaker

Mounting

Current rating range

0.05...10 A

(higher current ratings to special order)

G1 threadneck panel mounting

Number of poles

Auxiliary circuit

1 A, AC 250 V / DC 28 V

10,000 operations at 1 x I_N

-30...+60 °C (-22...+140 °F)

Typical life

1 1-pole protected

Mounting hardware

Ambient temperature

Insulation co-ordination

(IEC 60664 and 60664 A) withstand voltage

2.5 kV

2 hex nuts 1/4“-40 UNS-2A, serrated washer,

location pin (-G1 only)

rated impulse

pollution

degree

Terminal design (main contacts)

P1 blade terminals 6.3-0.8, without shunt terminal

Characteristic curve

reinforced insulation in operating area

Dielectric strength

IEC 60664 and 60664A)

operating area

F1 fast acting:1.01-1.4xI_N; magn.2-4xI_NDC (DC only)

M1 standard delay: therm. 1.01-1.4xI_N;

magn. 4.5-10.5xI_NDC; magn. 3.5-8xI_NAC

T1 delayed: therm. 1.01-1.4xI_N; DC

magn. 8-17xI_NDC, 6-13xI_NAC

test voltage

AC 3,000 V

AC 1,500 V

main/aux. circuit

Insulation resistance

> 100 MΩ (DC 500 V)

300 A

Auxiliary contacts

Interrupting capacity I_cn

S11

without auxiliary contact

with auxiliary contact (change over)

blade terminals 6.3x0.8 (QC .250)

Current ratings

Interrupting capacity

(UL 1077)

I_N

U_N

0.05 A

0.1...6 A

8...10 A

0.05...10 A

AC 250 V

DC 50 V

200 A

1,000 A

2,000 A

1,000 A

0.05...10 A

2215 - G1 1 1 - P1 F1 -S11 - 0.5 A

ordering example

Degree of protection

(IEC 60529/DIN 40050)

operating area IP30

terminal area IP00

Vibration

curve F1:

curves M1, T1:

Ordering information 2215-L1

6 g (57-500 Hz), 0.46 mm (10-57 Hz)

8 g (57-500 Hz), 0.61 mm (10-57 Hz)

to IEC 60068-2-6, test Fc

Type No.

2215 single pole thermal-magnetic circuit breaker

Mounting

10 frequency cycles/axis

Shock

L1 PCB mounting

curves F1, M1, T1:

curve F1:

curves M1, T1:

30 g (11 ms), directions 1, 2, 3, 4, 5,

10 g (11 ms), direction 6

15 g (11 ms), direction 6

Number of poles

1 1-pole protected

Mounting hardware

to IEC 60068-2-27, test Ea

without accessories

Terminal design (main contacts)

L1 solder pins, without shunt terminal

Characteristic curve

Corrosion

Humidity

Mass

96 hours at 5 % salt mist

to IEC 60068-2-11, test Ka

240 hours at 95 % RH

to IEC 60068-2-78, test Cab

F1 fast acting:1.01-1.4xI_N; magn.2-4xI_NDC (DC only)

M1 standard delay: therm. 1.01-1.4xI_N;

magn. 4.5-10.5xI_NDC; magn. 3.5-8xI_NAC

Auxiliary contacts - terminal design

approx. 25 g

S12

without auxiliary contact

with auxiliary contact (change over)

solder pins

Approvals

Current ratings

0.05...10 A

Authority

Standard

Rated voltage

Current ratings

UL 1077

AC 250 V

DC 75 V

0.05 A…10 A

0.05 A…10 A (20 A)

2215 - L1 1 0 - L1 F1 -S12 - 0.5 A ordering example

CSA

C22.2 No.

235

AC 250 V

DC 75 V

0.05 A…10 A

0.05 A…10 A (20 A)

1633

www.e-t-a.de

Thermal-Magnetic Circuit Breaker 2215-L.../G...

Standard current ratings and typical internal resistance values

Installation drawing

Current

ratings (A)

Internal

Current

Internal

resistance (Ω)

resistance (Ω) ratings (A)

ꢀꢁꢂꢃꢄꢅꢆꢇꢈ ꢄꢃꢂꢄ

ꢉꢃꢂꢆꢇꢊꢀꢃꢋꢂꢌ ꢆꢇꢍꢎꢏꢄꢅꢆꢀꢇꢐ

0.05

0.1

0.2

0.3

0.4

0.5

0.6

0.8

440

108

29.9

14.2

7.9

1.5

0.55

0.34

2.5

0.21

0.15

0.084

0.057

0.043

≤ 0.02

5.0

3.5

ꢀ

1ꢀ 11 1ꢅ

1.8

ꢒ

ꢕ1ꢓꢗ

ꢕ11ꢖ

1.2

ꢑꢀꢎꢇꢅꢆꢇꢈ ꢄꢃꢂꢄ

ꢉꢍꢅꢄꢇꢌꢄꢃꢌ ꢆꢇꢍꢎꢏꢄꢅꢆꢀꢇꢐ

Dimensions 2215-L1..

ꢂꢁ

ꢃ

ꢀ

ꢌꢍꢎꢏꢐꢑ

ꢉ1ꢋꢊ

Internal connection diagram

ꢁ

ꢂ

line

1ꢉꢊ

ꢉꢂ6ꢊ

ꢇꢋꢉ6

1ꢉꢂ1

ꢉꢀ33

ꢋ

ꢉ1ꢈꢊ

12 14

ꢂ

1ꢂ 11 1ꢀ

ꢂꢀꢁ

ꢉꢂꢈꢔ

11ꢀꢁ

ꢉꢀꢋ3

ꢉꢇ36

ꢆ

ꢇꢈ

1ꢉ1ꢀ

Shock directions

Dimensions 2215-G1..

ꢀ

10°

tightening torque max. 1 Nm

ꢁ

ø3

threadneck

1/4"-40 UNS-2A

.118

serrated washer

ꢂ

hex nut

lock washer

.433

blade terminals

DIN 46244-A6.3-0.8

(QC .250)

12 11 14

2.5

.098

.236

•

11.5

.453

1.14

front panel cut-out

ø6.4^+0.1

.252^+.004

ø2.4^+0.1

.094^+.004

inch

This is a metric design and millimeter dimensions take precedence (

)

www.e-t-a.de

1633

Thermal-Magnetic Circuit Breaker 2215-L.../G...

Typical time/current characteristics

-ꢇ1 ꢂ.ꢂ5ꢁꢆ ꢃ

ꢄC ꢈnlꢉ

-ꢇ1 ꢀꢁ1ꢂ ꢃ

ꢄC ꢈnlꢉ

-M1 ꢂ.ꢂ5ꢁꢆ ꢃ

ꢃC/ꢄC ^1ꢅ

1ꢒꢒꢒꢒ

1ꢒꢒꢒ

1ꢒꢒ

1ꢒꢒꢒ

1ꢒꢒ

1ꢒꢒꢒ

1ꢒꢒ

1ꢒ

ꢒꢓ1

ꢒꢓꢒ1

ꢒꢓ1

ꢒꢓꢒ1

ꢒꢓꢒꢒ1

ꢏ

ꢐ

ꢑ 1ꢒ

ꢏꢒ

ꢐꢒ 6ꢒ ꢑꢒ 1ꢒꢒ

ꢏ

ꢐ

ꢑ 1ꢒ

ꢏꢒ

ꢐꢒ 6ꢒ ꢑꢒ1ꢒꢒ

ꢏ

ꢐ

ꢑ 1ꢒ

ꢏꢒ

ꢐꢒ 6ꢒ ꢑꢒ1ꢒꢒ

ꢌ ꢄꢂꢅꢆꢈ ꢁꢍꢄꢆꢋ ꢉꢎꢁꢁꢆꢇꢄ

-M1 ꢀꢁ1ꢂ ꢃ

ꢃC/ꢄC ^1ꢅ

-T1 ꢂ.ꢂ5ꢁꢆ ꢃ

ꢃC/ꢄC ^1ꢅ

-T1 ꢀꢁ1ꢂ ꢃ

ꢃC/ꢄC ^1ꢅ

1ꢒꢒꢒꢒ

1ꢒꢒꢒ

1ꢒꢒ

1ꢒꢒꢒ

1ꢒꢒ

1ꢒꢒꢒ

1ꢒꢒ

1ꢒ

ꢒꢓ1

ꢒꢓꢒ1

ꢒꢓ1

ꢒꢓꢒ1

ꢒꢓ1

ꢒꢓꢒ1

ꢒꢓꢒꢒ1

ꢏ

ꢐ

ꢑ 1ꢒ

ꢏꢒ

ꢐꢒ 6ꢒ ꢑꢒ1ꢒꢒ

ꢏ

ꢐ

ꢑ 1ꢒ

ꢏꢒ

ꢐꢒ 6ꢒ ꢑꢒ1ꢒꢒ

ꢏ

ꢐ

ꢑ 1ꢒ

ꢏꢒ

ꢐꢒ 6ꢒ ꢑꢒ1ꢒꢒ

ꢌ ꢄꢂꢅꢆꢈ ꢁꢍꢄꢆꢋ ꢉꢎꢁꢁꢆꢇꢄ

ꢔ6ꢒ ꢕꢖ

ꢔ1ꢐꢒ ꢕꢗ

ꢔꢏ3 ꢕꢖ

ꢔꢘ3ꢓꢐ ꢕꢗ

ꢙ3ꢒ ꢕꢖ

ꢙꢏꢏ ꢕꢗ

^1ꢅꢚꢍꢛꢇꢆꢄꢂꢉ ꢄꢁꢂꢃꢃꢂꢇꢛ ꢉꢎꢁꢁꢆꢇꢄꢈ ꢍꢁꢆ ꢂꢇꢉꢁꢆꢍꢈꢆꢋ ꢜꢝ 3ꢒ ꢞ ꢊꢇ ꢟꢖ ꢈꢎꢃꢃꢠꢂꢆꢈ ꢡꢉꢎꢁꢢꢆ ꢚ1 ꢍꢇꢋ ꢀ1ꢣꢓ

0.05...10 A:

The time/current characteristic curve depends on the ambient temperature

prevailing. In order to eliminate nuisance tripping, please multiply the circuit

breaker current ratings by the derating factor shown below. See also section

Technical information.

-22

-30

-4

-20

+14 +32 +73.4 +86 +104 +122 +140

-10 +23 +30 +40 +50

Ambient °F

temp. °C

+60

1.04 1.11 1.19 1.29

0.76 0.79 0.83 0.88

Derating factor

All dimensions without tolerances are for reference only. In the interest of improved design,

performance and cost effectiveness the right to make changes in these specifications

without notice is reserved.Product markings may not be exactly as the ordering codes.

Errors and omissions excepted.

1633

www.e-t-a.de

1633

相关型号：