2215-G111-P1M1-S0-0.1A [ETAL]
Control equipment, communications systems, instrumentation;型号: | 2215-G111-P1M1-S0-0.1A |
厂家: | ETAL Group |
描述: | Control equipment, communications systems, instrumentation |
文件: | 总4页 (文件大小:207K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Thermal-Magnetic Circuit Breaker 2215-L.../G...
Description
Miniaturised single pole thermal-magnetic circuit breakers with trip-free
mechanism and toggle actuation (S-type TM CBE to EN 60934). Two
designs provide the option of either printed circuit board or threadneck
panel mounting. A separate shunt tap terminal and auxiliary contacts
are available. Fast acting, medium or long delay characteristics can be
specified for both models.
Suitable for use in distribution rails – see section Power Distribution
Systems.
Complies with CBE standard EN 60934 (IEC 60935).
Typical applications
1
2215-L1..
Technical data
2215-G1...
Control equipment, communications systems, instrumentation.
Suitable for mounting on Euro cards.
Ordering information 2215-G1
Voltage rating
AC 250 V (50/60 Hz); DC 50 V
(UL: AC 250 V; DC 75 V)
Type No.
2215 single pole thermal-magnetic circuit breaker
Mounting
Current rating range
0.05...10 A
(higher current ratings to special order)
G1 threadneck panel mounting
Number of poles
Auxiliary circuit
1 A, AC 250 V / DC 28 V
10,000 operations at 1 x IN
-30...+60 °C (-22...+140 °F)
Typical life
1 1-pole protected
Mounting hardware
Ambient temperature
Insulation co-ordination
(IEC 60664 and 60664 A) withstand voltage
2.5 kV
1
2 hex nuts 1/4“-40 UNS-2A, serrated washer,
location pin (-G1 only)
rated impulse
pollution
degree
2
Terminal design (main contacts)
P1 blade terminals 6.3-0.8, without shunt terminal
Characteristic curve
reinforced insulation in operating area
Dielectric strength
IEC 60664 and 60664A)
operating area
F1 fast acting:1.01-1.4xIN; magn.2-4xIN DC (DC only)
M1 standard delay: therm. 1.01-1.4xIN;
magn. 4.5-10.5xIN DC; magn. 3.5-8xIN AC
T1 delayed: therm. 1.01-1.4xIN; DC
magn. 8-17xIN DC, 6-13xIN AC
test voltage
AC 3,000 V
AC 1,500 V
main/aux. circuit
Insulation resistance
> 100 MΩ (DC 500 V)
300 A
Auxiliary contacts
Interrupting capacity Icn
S0
S11
without auxiliary contact
with auxiliary contact (change over)
blade terminals 6.3x0.8 (QC .250)
Current ratings
Interrupting capacity
(UL 1077)
IN
UN
0.05 A
0.1...6 A
8...10 A
0.05...10 A
AC 250 V
AC 250 V
AC 250 V
DC 50 V
200 A
1,000 A
2,000 A
1,000 A
0.05...10 A
2215 - G1 1 1 - P1 F1 -S11 - 0.5 A
ordering example
Degree of protection
(IEC 60529/DIN 40050)
operating area IP30
terminal area IP00
Vibration
curve F1:
curves M1, T1:
Ordering information 2215-L1
6 g (57-500 Hz), 0.46 mm (10-57 Hz)
8 g (57-500 Hz), 0.61 mm (10-57 Hz)
to IEC 60068-2-6, test Fc
Type No.
2215 single pole thermal-magnetic circuit breaker
Mounting
10 frequency cycles/axis
Shock
L1 PCB mounting
curves F1, M1, T1:
curve F1:
curves M1, T1:
30 g (11 ms), directions 1, 2, 3, 4, 5,
10 g (11 ms), direction 6
15 g (11 ms), direction 6
Number of poles
1 1-pole protected
Mounting hardware
to IEC 60068-2-27, test Ea
0
without accessories
Terminal design (main contacts)
L1 solder pins, without shunt terminal
Characteristic curve
Corrosion
Humidity
Mass
96 hours at 5 % salt mist
to IEC 60068-2-11, test Ka
240 hours at 95 % RH
to IEC 60068-2-78, test Cab
F1 fast acting:1.01-1.4xIN; magn.2-4xIN DC (DC only)
M1 standard delay: therm. 1.01-1.4xIN;
magn. 4.5-10.5xIN DC; magn. 3.5-8xIN AC
Auxiliary contacts - terminal design
approx. 25 g
S0
S12
without auxiliary contact
with auxiliary contact (change over)
solder pins
Approvals
Current ratings
0.05...10 A
Authority
Standard
Rated voltage
Current ratings
UL
UL 1077
AC 250 V
DC 75 V
0.05 A…10 A
0.05 A…10 A (20 A)
2215 - L1 1 0 - L1 F1 -S12 - 0.5 A ordering example
CSA
C22.2 No.
235
AC 250 V
DC 75 V
0.05 A…10 A
0.05 A…10 A (20 A)
1633
www.e-t-a.de
1
Thermal-Magnetic Circuit Breaker 2215-L.../G...
Standard current ratings and typical internal resistance values
Installation drawing
Current
ratings (A)
Internal
Current
Internal
resistance (Ω)
resistance (Ω) ratings (A)
ꢀꢁꢂꢃꢄꢅꢆꢇꢈ ꢄꢃꢂꢄ
ꢉꢃꢂꢆꢇꢊꢀꢃꢋꢂꢌ ꢆꢇꢍꢎꢏꢄꢅꢆꢀꢇꢐ
0.05
0.1
0.2
0.3
0.4
0.5
0.6
0.8
1
440
108
29.9
14.2
7.9
1.5
2
0.55
0.34
2.5
3
0.21
0.15
4
0.084
0.057
0.043
≤ 0.02
≤ 0.02
5.0
5
1
3.5
6
ꢀ
1ꢀ 11 1ꢅ
1
1.8
8
ꢒ
ꢕ1ꢓꢗ
3
ꢕ11ꢖ
1.2
10
ꢑꢀꢎꢇꢅꢆꢇꢈ ꢄꢃꢂꢄ
ꢉꢍꢅꢄꢇꢌꢄꢃꢌ ꢆꢇꢍꢎꢏꢄꢅꢆꢀꢇꢐ
Dimensions 2215-L1..
ꢂꢁ
ꢃ
ꢀ
ꢌꢍꢎꢏꢐꢑ
ꢉ1ꢋꢊ
Internal connection diagram
ꢁ
ꢂ
line
1ꢉꢊ
ꢉꢂ6ꢊ
ꢇꢋꢉ6
1ꢉꢂ1
0
I
1
11
11
ꢉꢀ33
ꢋ
ꢉ1ꢈꢊ
12 14
ꢂ
1ꢂ 11 1ꢀ
1
>
I
ꢂꢀꢁ
ꢉꢂꢈꢔ
11ꢀꢁ
ꢉꢀꢋ3
6
ꢉꢇ36
ꢆ
2
ꢇꢈ
1ꢉ1ꢀ
Shock directions
Dimensions 2215-G1..
ꢀ
6
10°
3
10°
tightening torque max. 1 Nm
ꢁ
I
0
ø3
1
threadneck
1/4"-40 UNS-2A
.118
serrated washer
ꢂ
hex nut
lock washer
11
.433
blade terminals
DIN 46244-A6.3-0.8
(QC .250)
2
12 11 14
1
2.5
.098
6
.236
29
•
11.5
.453
1.14
front panel cut-out
ø6.4+0.1
.252+.004
ø2.4+0.1
.094+.004
mm
inch
This is a metric design and millimeter dimensions take precedence (
)
2
www.e-t-a.de
1633
Thermal-Magnetic Circuit Breaker 2215-L.../G...
Typical time/current characteristics
-ꢇ1 ꢂ.ꢂ5ꢁꢆ ꢃ
ꢄC ꢈnlꢉ
-ꢇ1 ꢀꢁ1ꢂ ꢃ
ꢄC ꢈnlꢉ
-M1 ꢂ.ꢂ5ꢁꢆ ꢃ
ꢃC/ꢄC 1ꢅ
1ꢒꢒꢒꢒ
1ꢒꢒꢒꢒ
1ꢒꢒꢒꢒ
1ꢒꢒꢒ
1ꢒꢒ
1ꢒꢒꢒ
1ꢒꢒ
1ꢒꢒꢒ
1ꢒꢒ
1ꢒ
1
1ꢒ
1
1ꢒ
1
1
ꢒꢓ1
ꢒꢓ1
ꢒꢓꢒ1
ꢒꢓ1
ꢒꢓꢒ1
ꢒꢓꢒ1
ꢒꢓꢒꢒ1
1
ꢒꢓꢒꢒ1
1
ꢒꢓꢒꢒ1
1
ꢏ
ꢐ
6
ꢑ 1ꢒ
ꢏꢒ
ꢐꢒ 6ꢒ ꢑꢒ 1ꢒꢒ
ꢏ
ꢐ
6
ꢑ 1ꢒ
ꢏꢒ
ꢐꢒ 6ꢒ ꢑꢒ1ꢒꢒ
ꢏ
ꢐ
6
ꢑ 1ꢒ
ꢏꢒ
ꢐꢒ 6ꢒ ꢑꢒ1ꢒꢒ
ꢌ ꢄꢂꢅꢆꢈ ꢁꢍꢄꢆꢋ ꢉꢎꢁꢁꢆꢇꢄ
ꢌ ꢄꢂꢅꢆꢈ ꢁꢍꢄꢆꢋ ꢉꢎꢁꢁꢆꢇꢄ
ꢌ ꢄꢂꢅꢆꢈ ꢁꢍꢄꢆꢋ ꢉꢎꢁꢁꢆꢇꢄ
-M1 ꢀꢁ1ꢂ ꢃ
ꢃC/ꢄC 1ꢅ
-T1 ꢂ.ꢂ5ꢁꢆ ꢃ
ꢃC/ꢄC 1ꢅ
-T1 ꢀꢁ1ꢂ ꢃ
ꢃC/ꢄC 1ꢅ
1ꢒꢒꢒꢒ
1ꢒꢒꢒꢒ
1ꢒꢒꢒꢒ
1ꢒꢒꢒ
1ꢒꢒ
1ꢒꢒꢒ
1ꢒꢒ
1ꢒꢒꢒ
1ꢒꢒ
1ꢒ
1
1ꢒ
1
1ꢒ
1
ꢒꢓ1
ꢒꢓꢒ1
ꢒꢓ1
ꢒꢓꢒ1
ꢒꢓ1
ꢒꢓꢒ1
ꢒꢓꢒꢒ1
1
ꢒꢓꢒꢒ1
1
ꢒꢓꢒꢒ1
1
ꢏ
ꢐ
6
ꢑ 1ꢒ
ꢏꢒ
ꢐꢒ 6ꢒ ꢑꢒ1ꢒꢒ
ꢏ
ꢐ
6
ꢑ 1ꢒ
ꢏꢒ
ꢐꢒ 6ꢒ ꢑꢒ1ꢒꢒ
ꢏ
ꢐ
6
ꢑ 1ꢒ
ꢏꢒ
ꢐꢒ 6ꢒ ꢑꢒ1ꢒꢒ
ꢌ ꢄꢂꢅꢆꢈ ꢁꢍꢄꢆꢋ ꢉꢎꢁꢁꢆꢇꢄ
ꢌ ꢄꢂꢅꢆꢈ ꢁꢍꢄꢆꢋ ꢉꢎꢁꢁꢆꢇꢄ
ꢌ ꢄꢂꢅꢆꢈ ꢁꢍꢄꢆꢋ ꢉꢎꢁꢁꢆꢇꢄ
ꢔ6ꢒ ꢕꢖ
ꢔ1ꢐꢒ ꢕꢗ
ꢔꢏ3 ꢕꢖ
ꢔꢘ3ꢓꢐ ꢕꢗ
ꢙ3ꢒ ꢕꢖ
ꢙꢏꢏ ꢕꢗ
1ꢅ ꢚꢍꢛꢇꢆꢄꢂꢉ ꢄꢁꢂꢃꢃꢂꢇꢛ ꢉꢎꢁꢁꢆꢇꢄꢈ ꢍꢁꢆ ꢂꢇꢉꢁꢆꢍꢈꢆꢋ ꢜꢝ 3ꢒ ꢞ ꢊꢇ ꢟꢖ ꢈꢎꢃꢃꢠꢂꢆꢈ ꢡꢉꢎꢁꢢꢆ ꢚ1 ꢍꢇꢋ ꢀ1ꢣꢓ
0.05...10 A:
The time/current characteristic curve depends on the ambient temperature
prevailing. In order to eliminate nuisance tripping, please multiply the circuit
breaker current ratings by the derating factor shown below. See also section
Technical information.
-22
-30
-4
-20
+14 +32 +73.4 +86 +104 +122 +140
-10 +23 +30 +40 +50
Ambient °F
temp. °C
0
+60
1.04 1.11 1.19 1.29
0.76 0.79 0.83 0.88
1
Derating factor
All dimensions without tolerances are for reference only. In the interest of improved design,
performance and cost effectiveness the right to make changes in these specifications
without notice is reserved.Product markings may not be exactly as the ordering codes.
Errors and omissions excepted.
1633
www.e-t-a.de
3
1
4
www.e-t-a.de
1633
相关型号:
©2020 ICPDF网 联系我们和版权申明