P3900 [ETAL]
ADSL Transformer; ADSL变压器型号: | P3900 |
厂家: | ETAL Group |
描述: | ADSL Transformer |
文件: | 总4页 (文件大小:127K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRODUCT DATA SHEET
ADSL Transformer
P3900
Features
Applications
∗ Lead-free (Pb-free)
∗ Low Distortion
∗ IEC 950 and UL 60950 Certified
∗ UL Recognized Component
∗ Supplementary Insulation
∗ Surface Mount
∗ Alcatel DynaMiTe CPE
∗ ITeX Apollo 2 and SAM CPE
∗ ADSL over POTS
∗ Industry Standard Footprint
DESCRIPTION
P3900 is a low distortion transformer for Customer
Premises ADSL over POTS applications using the
Alcatel MTK-20140 and MTK-20150 chipsets.
The safety system yields very low transformer
parasitics, ensuring that P3900 exhibits excellent
frequency response and balance; in combination
with its good harmonic distortion performance,
P3900 is ideally suited to low cost yet demanding
ADSL applications.
P3900 is certified to safety standards IEC 950 and
UL 60950 for supplementary insulation, 250V
working voltage. P3900 is a UL Recognized
Component and is supported by an IEC CB Test
Certificate.
The part is completely lead-free and suitable for
lead-free and conventional processing.
ETALDOC 741/8
Page 1 of 4
January 2004
P3900
SPECIFICATIONS
Electrical
Typical values at T = 25ºC, unless otherwise stated.
Parameter
Inductance
Conditions
Min
440
Typ
470
Max
500
Units
µH
10kHz 100mV
1-4 (link 2-3)
Leakage inductance
100kHz, 100mV, 1-4
(link 2-3; link 7, 8, 9, 10)
-
-
-
-
8
µH
pF
Interwinding
capacitance
100kHz 100mV
1-10 (link 1, 2, 3, 4;
link 7, 8, 9, 10)
30
DC resistance
Turns ratio
1-3; 2-4; 7-9; 8-10
-
0.44
1.00
-
Ω
1-3 : 2-4
7-9 : 8-10
1-3 : 8-10
0.99
1.01
-
Frequency response (1)
Longitudinal balance (1)
30kHz – 3MHz
20kHz – 1.1MHz
30kHz 2.5Vrms
-
50
-
-
-
-
±1.0
-
dB
dB
dB
Total Harmonic
Distortion (1)
-80
Voltage isolation (2)
50Hz
DC
2.12
3.0
-
-
-
-
kVrms
kV
(1, 2, 3, 4 : 7, 8, 9, 10)
Operating range:
Functional
Ambient temperature
-40
-40
-
-
+85
+85
ºC
ºC
Storage
Notes
1. 100Ω source, 100Ω load.
2. Components are 100% tested at 3.25kV DC.
ETALDOC 741/8
Page 2 of 4
January 2004
P3900
CONSTRUCTION
Dimensions
Connections
Fig . 1
Fig . 2
15.40
17.15 max
(0.67)
(0.606)
13.0
(0.51)
0.80
(0.032)
CHAMFER
ON BOBBIN
Terminalsfinished: SnAg
Dimensions shown are in millimetres (inches).
SAFETY
ABSOLUTE MAXIMUM RATINGS
Constructed in accordance with IEC 60950-1,
EN 60950-1 and UL 60950-1, supplementary
insulation, 250V maximum working voltage,
flammability class V-0.
(Ratings of components independent of circuit).
Short term isolation voltage (1s)
2.12kVrms,
3.0kVDC
Storage temperature
-40ºC to
Installation requirements should be observed
whereby a minimum of 1.0mm creepage and
1.5mm clearance is maintained between the ferrite
core and accessible conductive parts in the host
equipment.
+85ºC
Reflow temperature (10s)
260ºC
ETALDOC 741/8
Page 3 of 4
January 2004
P3900
CERTIFICATION
COPYRIGHT
Certified by BSI to IEC 950:1991/A4:1996 (IEC CB
Test Certificate No. GB518W) sub-clauses 1.5,
1.5.1, 1.5.3, 2.2, 2.2.2, 2.2.3, 2.2.4, 2.9.2, 2.9.3,
2.9.4, 4.4, 4.4.3.2 (class V-0) and 5.3 for a
maximum working voltage of 250Vrms, nominal
mains supply voltage not exceeding 300Vrms and
a maximum operating temperature of +85ºC in
Pollution Degree 2 environments, supplementary
insulation, clearance greater than 2.0mm,
creepage greater than 2.5mm, distance through
solid insulation greater than 0.4mm.
ETAL and P3900 are Trade Marks of Profec
Technologies Ltd.
The Trade Mark ETAL is registered at the UK
Trade Marks Registry.
Profec Technologies Ltd. is the owner of the
design right under the Copyright Designs and
Patents Act 1988 and no rights or licences are
hereby granted or implied to any third party.
© 2000 - 2004 Profec Technologies Ltd.
Reproduction prohibited.
Recognized under the Component Recognition
Program of Underwriters Laboratories Inc. to US and
Canadian
requirements
CAN/CSA
C22.2
No. 60950-1-03/UL60950-1, First Edition, based on
IEC 60950-1, First Edition, maximum working voltage
250Vrms, Pollution Degree 2, supplementary
insulation.
UL File number E203175
Additionally, Profec Technologies certifies all
transformers as providing voltage isolation of
2.12kVrms, 3kV DC minimum. All shipments are
supported by a Certificate of Conformity to current
applicable safety standards.
E203175
ISO 9001
FM 25326
ETAL Group Oy, Kuormatie 14, FIN-03101, Nummela
Telephone: +358 (0)20 7500 330
Fax: +358 (0)20 7500 333
Website: www.etalgroup.com
Email: etalgroup@egruppen.com
ETALDOC 741/8
Page 4 of 4
January 2004
相关型号:
©2020 ICPDF网 联系我们和版权申明