25-80300 概述
Drop Wire Clamps for CATV and Telephone Cable
25-80300 数据手册
通过下载25-80300数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载BELDEN
Diamond® Drop Hardware
Drop Wire Clamps for CATV and Telephone Cable
Universal Messenger Cable Drop Wire Clamp
• Permits cable to “float” free, fully protected from strain and chafing.
• Drop clamp for the suspension of a messengered drop cable between the
pole, midspan and house.
• For use with RG59, RG6 and other cables
• Stainless steel bail wire and aluminum body.
Inner
Pack
Outer
Pack
Part Number
SC02MFA-SS
Description
Universal Messenger Drop Wire Clamp
--
125
Installation:
1. Begin separation of the messenger wire from the
cable using the end-edge of the SC02MFA-SS Drop
Clamp.
1
2
Note: Never use a knife or other sharp tool to
separate messenger and cable.
2. Fit the cable and messenger wire into the SCO2MFA-
SS Drop Clamp as shown, so that the Clamp Bail is
between the two.
3. Grasp the separated end of the messenger and cable
with one hand and grip the Clamp Body, as shown,
with your other hand. Then, pull the SC02MFA-SS
back, in a straight line, separating the length of
messenger wire needed to make the wrap; about 15
to 18-inches.
3
4
4. Pull the messenger wire around the center of the
bearing surface as shown, toward the rear or drop-
side of the Clamp.
Note: If at the house end of the drop, this will be
done while tensioning or “sagging” the drop.
5
5. Pass the messenger wire through the “L” Slots and
begin the wrap about the SC02MFA-SS body, as
shown.
6. Continue the messenger wire wrap for two full turns.
7. Pass the messenger wire through the “L” Slot, as
shown, to the drop-side of the SC02MFA-SS and cut
the excess wire away, or ground it to the strand.
6
7
Note: For drop cable with larger messenger wire, one
wrap is sufficient. Wrap the end of the wire around
the end of the SC02MFA-SS and bring it back up the
“L” Slots, then cut away the excess, or ground it to
the strand.
www.ppc-online.com
Customer Support: 800.800.6652
6
A
BELDEN BRAND
Drop
Hardware
Diamond® Drop Hardware
Drop Wire Clamps for CATV and Telephone Cable
"B" Drop Wire Clamp
• Used to support both ends of telephone drop, at strand and building.
• Suitable for 1-2 pair .200” max. height and .410’ max. width.
• 6 pair version: .300” max. height and .500" max. width.
• Stainless steel bailwire on all versions.
• Special Packages available. Please check with your PPC/Belden Representative.
Shim
Type
Inner Outer
Part Number Description
Material
Pair
Pack
Pack
23-44441
23-44444
23-44445
23-82350
23-82351
23-88881
23-88885
"B" Drop Wire Clamp Aluminum
1-2
Serrated
Serrated
Serrated
Dimpled
Dimpled
Serrated
Serrated
--
500
"B" Drop Wire Clamp
Aluminum
1-2
1-2
6
25
2
500
250
75
(Bell Packaging)
"B" Drop Wire Clamp Aluminum
"B" Drop Wire Clamp Aluminum
"B" Drop Wire Clamp Aluminum
1
6
25
25
2
150
500
250
"B" Drop Wire Clamp
(Bulk Packaging)
Stainless
Steel
1-2
1-2
Stainless
Steel
"B" Drop Wire Clamp
Installation:
1. Lay cable in shell.
2. Place shim on top of cable with raised
embossings against cable.
3. Insert wedge in shell (on top of shim) and pull
to engage. (Small end of wedge should be
initially engaged in track of large end of shell).
4. Place bailwire on “B” drop wire hook (ram’s
horn)with wedge loose. Pull drop wire through
clamp until proper sidewalk/alley clearance is
achieved.
5. Grasp clamp (bailwire still on ram’s horn) and
pull tightly to secure.
Customer Support: 800.800.6652
www.ppc-online.com
7
A
BELDEN BRAND
BELDEN
Diamond® Drop Hardware
Span Clamps
"Q" Span Clamp
• Provides drop wire take offs at mid-span.
• Steel components mechanically galvanized ASTM B695.
Clamp
Range
PigTail
Inner Outer
Part Number Description
Material
Diameter Pack Pack
27-00185
"Q" Span Clamp
Steel
1/4"-7/16"
1/4"
1/4"
--
--
100
100
"Q" Span Clamp for P3 Plates - Aluminum
Cable w/Messenger
2700185-LA
<1/4"
Pigtail - Steel
"O" Span Clamp
• Provides drop wire take offs at mid-span.
• Steel components mechanically galvanized ASTM B695.
Clamp
PigTail
Inner Outer
Part Number Description
27-00860 "O" Span Clamp
Material
Range
Diameter Pack
Pack
Plates - Aluminum
Pigtail - Steel
1/4"-3/8"
3/8"
--
50
"E" Span Clamp
• Provides drop wire take offs at mid-span.
• Steel components mechanically galvanized ASTM B695.
Clamp
PigTail
Inner Outer
Part Number Description
27-00865 "E" Span Clamp
Material
Range
Diameter Pack
Pack
Steel
1/4"-7/16"
3/8"
5
100
"C" Span Clamp
• Provides drop wire take offs at mid-span.
• Steel components mechanically galvanized ASTM B695.
Clamp
PigTail
Inner Outer
Part Number Description
27-00869 "C" Span Clamp
Material
Range
Diameter Pack
Pack
Plates - Aluminum
Hook - Steel
1/4"-3/8"
3/8"
--
50
www.ppc-online.com
Customer Support: 800.800.6652
8
A
BELDEN BRAND
Drop
Hardware
Diamond® Drop Hardware
Span Clamps
Figure 8 Span Clamp
• Provides drop wire take offs at mid-span.
• Steel components mechanically galvanized ASTM B695.
Part
Number
Clamp
Range
PigTail
Inner Outer
Description
Material
Diameter Pack
Pack
Plates - Aluminum
Hook - Steel
28-09800 Fig 8 (.109-.134")
28-09850 Fig 8 (.148-.250")
1/4"-7/16"
1/4"-7/16"
3/8"
3/8"
--
--
50
Plates - Aluminum
25
Hook - Steel
Econospan Span Clamp
• Multi directional clamp for messengered and non-messengered drop cable used for
dead-end or mid-span application.
• Mechanically galvanized ASTM B695.
Inner Outer
Part Number Description
Pack
Pack
SC03E
Clamp will Accept 1/4" (6.6MM) Steel Strand
--
100
Multi-Directional Span Clamp
• Multi-directional span clamp used for drop cables at mid-span location.
• Unique claw design locks in between steel strand lays to prevent rotation.
• Mechanically galvanized ASTM B695.
Hook Load
Capacity
Inner Outer
Part Number Description
Pack
Pack
SC03-1
SC03-2
Single Pigtail Hook for 1/4" Steel Strand
400 lbs.
400 lbs.
--
100
Double Pigtail Hook for 1/4" Steel Strand
--
75
Customer Support: 800.800.6652
www.ppc-online.com
9
A
BELDEN BRAND
BELDEN
Diamond® Drop Hardware
Clamps
One Hole Clamps
• Used to support cable, conduit or pipe.
• Mechanically galvanized steel ASTM B695.
Pipe or
Cable Size
Hole
Inner Outer
Part Number Description
Size
Stock Size
Diameter Pack
Pack
24-80003
24-80004
24-80005
24-80006
24-80007
24-80008
24-80009
24-80010
24-80011
24-80012
24-80014
24-80016
24-80018
24-80020
One Hole Clamp
One Hole Clamp
One Hole Clamp
One Hole Clamp
One Hole Clamp
One Hole Clamp
One Hole Clamp
One Hole Clamp
One Hole Clamp
One Hole Clamp
One Hole Clamp
One Hole Clamp
One Hole Clamp
One Hole Clamp
L3
3/16"
1/4"
.035" x 1/2"
7/32"
7/32"
7/32"
7/32"
7/32"
7/32"
7/32"
7/32"
9/32"
9/32"
9/32"
9/32"
9/32"
9/32"
500
500
500
500
300
--
7,500
L4
L5
.035" x 1/2"
.035" x 1/2"
.048" x 1/2"
.048" x 1/2"
.048" x 1/2"
.048" x 1/2"
.048" x 1/2"
.062" x 5/8"
.062" x 11/16"
.062" x 11/16"
.080" x 3/4"
.080" x 3/4"
.115" x 7/8"
5,000
5,000
5,000
2,400
500
5/16"
3/8"
L6
L7
7/16"
1/2"
L8
L9
9/16"
5/8"
--
500
L10
L11
L12
L14
L16
L18
L20
--
500
11/16"
3/4"
--
500
--
500
7/8"
--
500
1"
--
250
1-1/8"
1-1/4"
--
250
--
100
One Hole Offset Clamps
• Used to secure telephone cable runs.
• Offset provides a grip on multi-size cable.
• Mechanically galvanized steel ASTM B695.
Hole
Inner Outer
Part Number Description
Cable Size
Stock Size
Diameter Pack
Pack
23-80403
23-80405
23-80406
23-80407
One Hole Offset Clamp
5/32" - 7/32"
.048" x 5/16"
9/64"
9/64"
7/32"
7/32"
500
500
500
500
5,000
One Hole Offset Clamp
One Hole Offset Clamp
One Hole Offset Clamp
1/4" - 5/16"
5/16" - 3/8"
3/8" - 1/2"
.048" x 5/16"
.048" x 1/2"
.048" x 1/2"
7,500
5,000
5,000
www.ppc-online.com
Customer Support: 800.800.6652
10
A
BELDEN BRAND
Drop
Hardware
Diamond® Drop Hardware
Clamps
Two Hole Clamps
• Used to support cable, conduit or pipe.
• Offset provides a grip on multi-size cable.
• Mechanically galvanized steel ASTM B695.
Pipe or
Cable Size
Hole
Inner Outer
Part Number Description
Size
Stock Size
Diameter Pack
Pack
25-80070
25-80100
25-80110
25-80120
25-80140
25-80160
25-80180
25-80200
25-80240
25-80260
25-80300
25-80360
25-80400
25-80420
25-80560
Two Hole Clamp
Two Hole Clamp
Two Hole Clamp
Two Hole Clamp
Two Hole Clamp
Two Hole Clamp
Two Hole Clamp
Two Hole Clamp
Two Hole Clamp
Two Hole Clamp
Two Hole Clamp
Two Hole Clamp
Two Hole Clamp
Two Hole Clamp
Two Hole Clamp
#7
7/16"
5/8"
.048" x 1/2"
13/64"
7/32"
9/32"
9/32"
9/32"
9/32"
9/32"
9/32"
9/32"
9/32"
9/32"
11/32"
11/32"
11/32"
11/32"
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
600
#10
#11
#12
#14
#16
#18
#20
#24
#26
#30
#36
#40
#42
#56
.048" x 1/2"
.062" x 5/8"
.062" x 11/16"
.062" x 11/16"
.080" x 3/4"
.080" x 3/4"
1/8" x 7/8"
1/8" x 7/8"
1/8" x 7/8"
1/8" x 7/8"
1/8" x 1"
500
250
250
250
300
300
100
50
11/16"
3/4"
7/8"
1"
1-1/8"
1-1/4"
1-1/2"
1-5/8"
1-7/8"
2-1/4"
2-1/2"
2-5/8"
3-1/2"
50
50
75
1/8" x 1"
50
1/8" x 1"
50
1/8" x 1"
50
Customer Support: 800.800.6652
www.ppc-online.com
11
A
BELDEN BRAND
BELDEN
Diamond® Drop Hardware
Brackets
Drop Wire Mast Bracket
• Mechanically galvanized steel ASTM B695.
• Mast capacity 2-1/2” to 3” diameter.
Inner Outer
Part Number
40-00540
Description
Pack
Pack
Drop Wire Mast Bracket
--
50
House Bracket
• Multi-dwelling drop cable bracket.
• Attach to building with drive screws or wood screws (1/4” dia.).
• Attach insulator in 7/16” dia. mounting hole.
• Mechanically galvanized steel ASTM B695.
Inner Outer
Part Number
40-00200
Description
Pack
Pack
House Bracket
1-3/4" Wide x 3-1/2" High x 3" Horizontal Leg
--
50
Corner Wall Bracket
• Corner wall bracket used to dead-end a messenger drop cable or a steel strand at the
building.
• Mechanically galvanized ASTM B695.
Inner Outer
Part Number
SC53-2
Description
Pack
Pack
For Messengered Drop Cable with .051" to .072"
Steel Messenger Wire
--
50
www.ppc-online.com
Customer Support: 800.800.6652
12
A
BELDEN BRAND
Drop
Hardware
Diamond® Drop Hardware
Hooks
Drop Wire Hook (Ram's Horn)
• Used to attach bail wire type drop wire clamp to building.
• Mechanically galvanized ASTMB695.
Inner Outer
Part Number
30-01732
Description
Pack
Pack
Ram's Horn Type Drop Wire Hook
50
600
"Omni" House Hook
• Omni house hook used to dead-end a messengered drop cable at the house.
• Retainer provides a 1” diameter wrap to messenger steel wire keeping the messenger
intact for bonding at the ground block.
• Mechanically galvanized ASTM B695.
Inner Outer
Part Number Description
Pack
Pack
SC26-1
Omni Directional Signal Retainer
Omni Directional Signal Retainer - Extra Long
--
100
SC26-1L
--
100
"P" House Hook
• Used to secure coaxial cable drop installations at the building.
• Accepts bailwire dropwire clamps, wire grips or messenger wraps.
• Mechanically galvanized steel ASTM B695.
Overall
Screw
Length Diameter Inner
Outer
Pack
Part Number Description
(inches) (inches)
Pack
31-00809
31-10809
31-00800
31-00801
Regular House Hook
3-3/4
4-1/2
3-3/4
4-1/2
1/4
1/4
1/4
1/4
--
--
*
200
200
*
Long House Hook
Wrench P House Hook
Wrench P House Hook
*
*
* ( Ask PPC/Belden Representative ).
www.ppc-online.com
Customer Support: 800.800.6652
13
A
BELDEN BRAND
BELDEN
Diamond® Drop Hardware
Hooks, Rings, Screw Fixtures
Dead End Strap
• Dead-end strap made of high quality G90 pre-galvanized steel used to dead-end a
drop cable at the house service mast.
Inner Outer
Part Number
SC11-1
Description
Pack
Pack
From 1" to 4" Diameter Mast
--
100
Bridle Rings
• Used to support cable runs and electrical wiring.
• Mechanically galvanized ASTMB695.
31-00823
Part
Number
Eye
Dia.
Thread Max.
Inner Outer
Description
Style
Size
Load
Pack
Pack
31-00810 Wood Screw Bridle Ring
31-00812 Wood Screw Bridle Ring
31-00819 Wood Screw Bridle Ring
31-00821 Machine Screw Bridle Ring
31-00823 Machine Screw Bridle Ring
31-00824 Machine Screw Bridle Ring
31-00825 Machine Screw Bridle Ring
31-00827 Machine Screw Bridle Ring
A
1-5/8"
#14
75 lbs.
--
100
C
G
K
1-1/4"
7/8"
#14
#10
75 lbs.
50 lbs.
--
25
100
--
100
100
3/4" #10-24 50 lbs.
1-1/4" #10-24 50 lbs.
1-3/4" #10-24 50 lbs.
1-1/4" 1/4"-20 50 lbs.
1-5/8" #10-24 50 lbs.
1,000
100
31-00819
M
P
31-00810
--
100
Q
R
--
100
--
100
Angle Screw Fixture
• Used to attach bail wire type drop wire clamp to building.
• Mechanically galvanized ASTMB695.
Wood
Screw
Diameter
Shank
Diameter
Length
Machine Insulator
Part
Number
Thread
Length
Shank
Length
Inner Outer
Description
Pack
Pack
33-00840 Angle Screw Fixture
33-00841 Angle Screw Fixture
5/16" (18) 9/32" x 2-1/4"
3/8" 3/8" x 2"
1"
1-1/2"
2-1/2"
--
150
1-1/8"
--
100
www.ppc-online.com
Customer Support: 800.800.6652
14
A
BELDEN BRAND
Drop
Hardware
Diamond® Drop Hardware
Cable Clips
"S" Cable Clip - Telephone
• Used to secure telephone drip loop to “B” drop wire hook (Ram’s horn).
• Ribs provide positive grip on drop wire.
• Aluminum “S” clip to be secured with lineman’s pliers.
Maximum
Cable Size
Inner Outer
Part Number
23-80261
Description
Pack
Pack
2-3 Pair "S" Clip
.225" x .375"
.300" x .500"
.160" x .300"
25
500
23-80262
23-80366
6 Pair "S" Clip
--
500
500
1-2 Pair "S" Clip
25
"S" Cable Clip - Coaxial
• Used to prevent separation of two cables or a messenger steel wire from a drop cable.
Inner Outer
Part Number
SC10-1
Description
Pack
Pack
Made of Soft Aluminum for Easy Finger Forming
Accepts Up to Series 7 Cable
--
500
Dual Cable Clip
• Secures dual coaxial cable and telephone six pair cable runs.
• Mechanically galvanized steel ASTM B695.
Inner Outer
Part Number
22-12121
Description
Pack
Pack
Dual Cable Clip - Series 6
500
5,000
Customer Support: 800.800.6652
www.ppc-online.com
15
A
BELDEN BRAND
BELDEN
Diamond® Drop Hardware
Cable Clips
"U" Cable Clip
• Pre-formed aluminum cable clip used to secure drop cables and ground wires to either
wood or masonry surfaces using self-tapping screws.
Inner
Pack
Outer
Pack
Part Number
SC19-1
Description
"U" Cable Clip RG59- 6MM
500
500
400
500
500
400
10,000
10,000
8,000
SC20-1
"U" Cable Clip for Series 6 Cable -7MM
"U" Cable Clip for Dual RG-6 Cable
"U" Cable Clip for #12AWG to #14AWG Ground Wire.
U" Cable Clip for #6AWG to #10AWG Ground Wire.
"U" Cable Clip RG11 - 10MM
SC20-D6
SC21-1
10,000
10,000
8,000
SC21-2
SC22-1
Screw and Snap® Clips (Patented)
• Used to secure coaxial cable and ground wire runs to wood, masonry, stucco, brick or
concrete.
• For concrete or brick drill .138” pilot hole. Screw will cut threads in hole.
• Convenient strips of ten clips snap off after installation.
Cable size stamped on clips (aluminum).
ew hardened and treated for 500 hour salt spray resistance. ASTM B117.
c plugs secure screws to strip and prevent torquing.
andy holder included in every 30 strip carton.
Inner Outer
Part Number
24-88013
24-88014
24-88016
24-88017
24-88027
Description
Screw Size Cable Size
Pack
Pack
300
300
300
300
300
Screw & Snap Clips
Screw & Snap Clips
Screw & Snap Clips
Screw & Snap Clips
Screw & Snap Clips
#8 x 3/4"
#8 x 3/4"
#8 x 3/4"
#8 x 3/4"
#8 x 3/4"
Series 6
Series 59
10-14 AWG
Series 6Q
Series 11
30
30
30
30
30
*Screw N Snap can be used to attach cable to wood, masonry and concrete when a
.138" pilot hole is drilled and fitted with a Diamond Plastic Screw Anchor, Diamond
part number, 12-08210.
www.ppc-online.com
Customer Support: 800.800.6652
16
A
BELDEN BRAND
Drop
Hardware
Diamond® Drop Hardware
Cable Clips
SAXXIT® Cable Clips (Patented)
• “Galvalume” steel cable clip used on concrete, mortar, stucco or wood with a
pre-inserted, self-tapping screw or a drive pin.
Inner Outer
Part Number
SC16-19
Description
Pack
Pack
SAXXIT Cable Clip for 6mm Cable with No. 8 x 1" Screw
1/4" Hex Head Indented "Phillips"
250
5,000
SAXXIT Cable Clip for 7mm Cable with No. 8 x 1" Screw
1/4" Hex Head Indented "Phillips"
SC16-26
250
250
250
250
250
250
5,000
5,000
5,000
5,000
5,000
5,000
SAXXIT Cable Clip for 8mm Cable with No. 8 x 1" Screw
1/4" Hex Head Indented "Phillips"
SC16-3Q
SAXXIT Cable Clip for 10mm Cable with No. 8 x 1" Screw
1/4" Hex Head Indented "Phillips"
SC16-411
SC16DP-19
SC16DP-26
SC16DP-3Q
SAXXIT Cable Clip for 6mm Cable with 1" Drive Pin
SAXXIT Cable Clip for 7mm Cable with 1" Drive Pin
SAXXIT Cable Clip for 8mm Cable with 1" Drive Pin
SAXXON® Cable Clips
• “Galvalume” steel cable clip used on wood, stucco or mortar with a 1” hardened
pre-inserted nail.
Inner
Outer
Pack
Part Number
SC18-19
Description
Pack
SAXXON Cable Clip for 6mm Cable
500
10,000
10,000
10,000
3,600
SC18-26
SC18-3Q
SC18L-26
SAXXON Cable Clip for 7mm Cable
SAXXON Cable Clip for 8mm Cable
500
500
300
500
500
SAXXON Cable Clip for 7mm Cable
with 1.625" Hardened Nail
SC18P-26BLACK SAXXON Cable Clip for 7mm Cable, Painted Black
SC18P-26WHITE SAXXON Cable Clip for 7mm Cable, Painted White
10,000
10,000
Customer Support: 800.800.6652
www.ppc-online.com
17
A
BELDEN BRAND
BELDEN
Diamond® Drop Hardware
Cable Clips, Cable Clamps,
Siding Clips
• Secures coaxial cable runs to aluminum, vinyl or steel siding.
• High density UV stabilized outdoor polypropylene.
• Available in natural (clear) or black.
12-01401
12-01402
Inner Outer
Part Number
12-01401
12-01402
12-01501
12-01502
Description
Pack
100
100
100
100
Pack
1,000
1,000
1,000
1,000
Horizontal Siding Clip - Natural
Vertical Siding Clip - Natural
Horizontal Siding Clip - Black
Vertical Siding Clip - Black
12-01501
12-01502
"E" Drop Wire Clamp
• Used to secure telephone drop wire cable runs.
• Mechanically galvanized ASTM B695.
• Transverse ribs grip cable to prevent abrasion.
Inner Outer
Part Number
23-80361
23-80363
23-80370
23-83361
40-80365
Description
Pack
50
1
Pack
2,000
40
"E" Drop Wire Clamp, One Pair, Steel
"E" Drop Wire Clamp, One Pair, Steel, Box of 50
"E" Drop Wire Clamp, Two Pair, Steel
"E" Drop Wire Clamp, Six Pair, Steel
"E" Drop Wire Clamp, Coax, Aluminum
50
50
--
2,000
2,000
500
www.ppc-online.com
Customer Support: 800.800.6652
18
A
BELDEN BRAND
Drop
Hardware
Diamond® Drop Hardware
Cable Ties, Cable Bushings
Cable Ties - Aluminum
• Reusable strap with integral buckle made of malleable aluminum, corrosion resistant,
used to support drop cables on the strand, pedestal, lock box and along the wall.
• No sharp edges to cut hands or damage cable.
Inner Outer
Part Number
SC053-1
Description
Pack
Pack
7" Long, 1/4" Band - Reusable Aluminum Tie
400
8,000
SC053-2
SC28-1*
SC28-2
10" Long, 1/4" Band - Reusable Aluminum Tie
ID Tag, 3-1/4" long, plain for scribe on
100
400
400
1,500
8,000
8,000
ID Tag, 3-1/4" long with random 6 digit number
ID Tag, 3-1/4" long, with pre-stamped 4 letters and 2
banks of numbers from 0-9
SC28-3
SC28-4
400
8,000
ID Tag, 7" long, plain to scribe on
--
--
200
200
500
500
800
SC28-4SCATV ID Tag, 7" long, pre-stamped CATV
SC28-5
SC28-6
SC28-8
ID Tag, 10" long, plain for scribe on
--
ID Tag, 16" long, plain for scribe on
--
Id Tag, 3-1/4" long with single large digit number or letter
400
Id Tag, 2-1/2" X 1-1/4" grounding tag with warning mes-
sage. Optional cable system name and telephone number
SC28-GT
400
800
* Different colors available: Green, Red, Yellow
Feed Thru Bushing
• Protects coaxial cable entry into subscriber’s building.
• Available in black or natural (clear).
• High density UV stabilized outdoor polypropylene.
34-08052
34-08057
34-08053
Inner Outer
Part Number
34-08052
34-08053
34-08057
34-08058
34-08059
34-08060
Description
Color
Cable Size
Pack
100
100
100
100
100
100
Pack
1,000
1,000
1,000
1,000
1,000
1,000
Feed Thru Bushing
Black
Series 6, 6Q
Feed Thru Bushing
Natural Series 6, 6Q
Black Series 6, 6Q
Natural Series 6, 6Q
Black Series 6, 6Q
Natural Series 6, 6Q
34-08058
34-08060
Feed Thru Bushing - Dual RG6
Feed Thru Bushing - Dual RG6
Feed Thru Bushing - 15º Angle
Feed Thru Bushing - 15º Angle
34-08059
Customer Support: 800.800.6652
www.ppc-online.com
19
A
BELDEN BRAND
BELDEN
Diamond® Drop Hardware
Drive Rings, Wire Loops
Drive Rings
• Used to support cable runs and electrical wiring.
• Mechanically galvanized steel ASTM B695.
Nail Length Maximum Inner Outer
Part Number
30-00801
Description
Eye Size
(in)
Load (lbs)
Pack
Pack
Drive Ring
1/2"
2.062
50
50
2,500
30-00804
30-00805
30-00807
30-01801*
30-01804*
30-01805*
30-01807*
Drive Ring
5/8"
7/8"
2.250
2.563
2.938
2.438
2.750
3.062
3.438
75
100
125
50
25
25
20
50
25
25
25
1,000
500
Drive Ring
Drive Ring
1-1/4"
1/2"
120
Drive Ring - Long
Drive Ring - Long
Drive Ring - Long
Drive Ring - Long
2,500
1,000
500
5/8"
75
7/8"
100
125
1-1/4"
250
* These sizes have longer nails for greater carrying capacity
Drive Rings
• Drive ring used for guiding cables.
• May be used at the pole or at the house.
• Double crimped loop on concrete nail facilitates installation.
• Mechanically galvanized ASTM B695.
Inner
Outer
Pack
Part Number
SC17-1
Description
Pack
5/8" Ring with 2-1/4" Concrete Nail
1-1/4" Ring with 2-1/2" Concrete Nail
--
250
200
SC17-2
--
Wire Loops and Wire Loop Drive Pins
• Used to attach drop wire runs to masonry with wire loop drive pins.
• Wire loops mechanically galvanized steel ASTM B695.
• Wire loop drive pins zinc plated steel ASTM B633.
Inner
Pack
Outer
Pack
Part Number
Description
15-00120
15-00121
15-00122
15-00123
15-10101
15-10102
Wire Loop 1/2"
100
100
70
1,000
1,500
560
Wire Loop 5/8"
Wire Loop 7/8"
Wire Loop 1-1/4"
100
100
100
1,000
1,500
1,500
Wire Loop Drive Pin, 1-1/2" Long
Wire Loop Drive Pin, 1-3/4" Long
www.ppc-online.com
Customer Support: 800.800.6652
20
A
BELDEN BRAND
Drop
Hardware
Diamond® Drop Hardware
Drive Pins, Drive Tools
Drive Pins
• Used to secure clamps to masonry surface.
• Zinc plated steel ASTM B633.
Inner Outer
Part Number
15-10041
Description
Pack
Pack
Drive Pin - 1/4" Head x 3/4" Long, Metal Washer
100
100
100
100
1,500
15-10042
15-10043
15-10044
Drive Pin - 1/4" Head x 1" Long, Metal Washer
Drive Pin - 1/4" Head x 1-1/4" Long, Metal Washer
Drive Pin - 1/4" Head x 1-1/2" Long, Metal Washer
1,500
1,500
1,500
WARNING: Do not use powder actuated tools
Customer Support: 800.800.6652
www.ppc-online.com
21
A
BELDEN BRAND
25-80300 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
25-80360 | ETC | Drop Wire Clamps for CATV and Telephone Cable | 获取价格 | |
25-80400 | ETC | Drop Wire Clamps for CATV and Telephone Cable | 获取价格 | |
25-80420 | ETC | Drop Wire Clamps for CATV and Telephone Cable | 获取价格 | |
25-80560 | ETC | Drop Wire Clamps for CATV and Telephone Cable | 获取价格 | |
25-CBSA-0.5X1.0X0.225 | ETC | 25-CBSA-0.5X1.0X0.225--25S11--CI | 获取价格 | |
25-CBSA-0.5X1.5X0.225 | ETC | 25 SERIES CBS SHIELD ASSEMBLY - | 获取价格 | |
25-CBSA-0.5X1.75X0.225 | ETC | 25 SERIES CBS SHIELD ASSEMBLY - | 获取价格 | |
25-CBSA-0.5X2.0X0.225 | ETC | 25 SERIES CBS SHIELD ASSEMBLY - | 获取价格 | |
25-CBSA-0.5X2.25X0.225 | ETC | 25 SERIES CBS SHIELD ASSEMBLY - | 获取价格 | |
25-CBSA-0.5X2.5X0.225 | ETC | 25 SERIES CBS SHIELD ASSEMBLY - | 获取价格 |
25-80300 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6