114100-R56JI [ETC]
RESISTOR 0.56R LOW OHMIC ; 电阻0.56R低电阻\n型号: | 114100-R56JI |
厂家: | ETC |
描述: | RESISTOR 0.56R LOW OHMIC
|
文件: | 总2页 (文件大小:100K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Cement Coated
Wirewound Resistors
W30 SERIES
● 1% Tolerance
● Flameproof cement coating
● All welded construction
● High reliabilty
● Ideal for automotive applications and
power supplies
Electrical Data
W31
3.0
NOTES
Power rating at 25°C
Power rating at 70°C
Resistance range
watts
watts
ohms
ppm/°C
%
2.5
0.01 to 10k
See below
5 2 1
TCR (-55 to 155°C)
Resistance tolerance
Standard values
E24 series preferred
83
Other values to special order
Thermal impedance
Ambient temperature range
Limiting element voltage
°C/watt
°C
-55 to 155
100
volts
TCR
ppm/°C
0.01 ohms
0.033 ohms
0.091 ohms
10 ohms
10K ohms
<1000
<500
<200
<150
<100
Physical data
Dimensions (mm) and Weight (g)
Wt.
Type
W31
L max.
13
D max.
5.6
f min.
22.75
d nom.
0.8
nom.
1.0
d dia
D
L
f
CONSTRUCTION
MARKING
A high quality ceramic substrate is assembled with
interference fit end caps to which are welded the element
winding and termination wires. The protection is then
applied to the body, providing an effective seal which is
impervious to moisture, shock, vibration, fungus and salt
spray.
W31 resistors are legend marked with type reference,
resistance value and tolerance. Values are marked in
accordance with IEC 62.
SOLVENT RESISTANCE
The body and marking are resistant to all normal industrial
cleaning solvents suitable for printed circuits.
TERMINATIONS
Material
Strength
Solder-coated copper clad steel wire.
The terminations meet the requirements of
IEC 68.2.21.
FLAMMABILITY
The resistor coating will not burn under any condition of
applied temperature or component overload.
Solderability The terminations meet the requirements of
IEC 115-1, Clause 4.17.3.2.
General Note
Welwyn Components reserves the right to make changes in product specification without notice or liability.
All information is subject to Welwyn’s own data and is considered accurate at time of going to print.
© Welwyn Components Limited
Bedlington, Northumberland NE22 7AA, England Tel: 01670 822181 Fax: 01670 829465 Web: http://www.Welwyn-TT.co.uk
Issue A 07/99
Cement Coated
Wirewound Resistors
W30 SERIES
Performance Data
MAXIMUM
∆R% 5.0 + .001Ω
∆R% 5.0 + .001Ω
∆R% 5.0 + .001Ω
TYPICAL
Load: 1000 hrs 3 Watts @ 25°C
1000 hrs 2.5 Watts @ 70°C
Dry heat: 1000 hrs at 200°C
Derating from room temperature
Short term overload 10 x rated power
for 5 seconds
3.5
3.5
3.5
WA30 Series Derating Curve
130
120
110
100
90
see derating curve
∆R% 5.0 + .001Ω
∆R% 5.0 + .001Ω
55/200/56
1.0
3.5
80
70
60
50
40
30
Climatic
Climatic category
20
10
0
Long term damp heat: 56 days
Temperature rapid change
Resistance to solder heat
Vibration and bump
∆R% 3.0 + .001Ω
∆R% 2.0 + .001Ω
∆R% 5.0 + .001Ω
∆R% 5.0 + .001Ω
1.0
1.5
2.0
2.0
20 40 60 80 100 120 140 160 180 200 220 240 260 280
Temp
Voltage proof
volts
500 min
Pulse handling data
Available by request
APPLICATION NOTES
Type
W31
A
The terminations should not be bent closer than
1.6mm from the body, and the recommended
minimum bend radius is 1.2mm.
63 ± 2
Care must be taken when determining clearance
between the resistor body and the P.C.B. or other
components. Resistance is measured 6mm from
body.
10 ± 0.5
f1
f2
f1 – f2 ≤ 1.4 mm
PACKAGING
A
6
6
The standard method of packaging is taped in
ammopacks. Alternatives available by request
are:
-taped and reeled
- loose packed in boxes (minimum lead length
30mm)
W31 resistors can be supplied preformed.
Contact factory for details.
STANDARD QUANTITIES PER PACKAGE
Type
W31
1000
1000
Ammopack
Reel
© Welwyn Components Limited
Bedlington, Northumberland NE22 7AA, England Tel: 01670 822181 Fax: 01670 829465 Web: http://www.Welwyn-TT.co.uk
Issue A 07/99
相关型号:
©2020 ICPDF网 联系我们和版权申明