1230-050A-1L [ETC]

Signal Conditioner ; 信号调理\n
1230-050A-1L
型号: 1230-050A-1L
厂家: ETC    ETC
描述:

Signal Conditioner
信号调理\n

文件: 总2页 (文件大小:112K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Model 1230 UltraStable  
Medical Instrumentation  
Calibration  
Process Control  
Factory Automation  
Air Flow Management  
Leak Detection  
PC Board Mountable Pressure Sensor  
0-100 mV Output  
Absolute, Differential, and Gage  
Wide Temperature Range  
DESCRIPTION  
The Model 1230 is a high performance temperature  
compensated, piezoresistive silicon pressure sensor packaged in  
a dual-in-line configuration. It is intended for cost sensitive  
applications where excellent performance and long-term  
stability are required.  
Integral temperature compensation is provided over a range  
of -20°C to +85°C using laser-trimmed thick film resistors. An  
additional laser-trimmed resistor is included to normalize  
pressure sensitivity variations, for interchangeability of 1%, by  
programming the gain of an external differential amplifier.  
Differential and gage pressure ranges from 0-15 PSI to  
0-100 PSI are available. Absolute pressure ranges of 0-15 PSIA  
to 0-30 PSIA are available. Multiple lead and tube  
configurations are available for different applications.  
Please refer to the low pressure section for information on  
products with operating pressures less than 0-2 PSI. For a  
compensated sensor using a current set resistor as opposed to a  
gain set resistor, please refer to the Model 1240.  
FEATURES  
-20°C to +85°C Compensated  
Temperature Range  
±0.1% Non-linearity  
±0.5% Temperature Performance  
DIMENSIONS  
1.0% Interchangeable Span  
(provided by gain set resistor)  
Solid State Reliability  
Low Power  
STANDARD RANGES  
Range  
psig  
psid  
psia  
0 to 15  
0 to 30  
0 to 50  
0 to 100  
1-18  
HITs – Wide Temperature Range  
PC Board Mountable Pressure Sensor  
PERFORMANCE SPECIFICATIONS  
Model 1230 UltraStable  
Supply Current: 1.5mA  
Ambient Temperature: 25°C (Unless otherwise specified)  
PARAMETERS  
MIN  
TYP  
MAX  
150  
2
UNITS  
mV  
NOTES  
Full Scale Output Span  
Zero Pressure Output  
Pressure Non-linearity  
Pressure Hysteresis  
Input Resistance  
75  
100  
1
3
2
mV  
0.05  
0.01  
3500  
0.3  
0.1  
0.1  
4500  
0.5  
0.5  
% Span  
% Span  
2500  
Temperature Error – Span  
Temperature Error – Zero  
Temperature Coefficient - Resistance  
Thermal Hysteresis – Zero  
Short Term Stability of Offset  
Short Term Stability of Span  
Long Term Stability of Offset  
Long Term Stability of span  
Supply Current  
% Span  
% Span  
%/°C  
3, 4  
3, 4  
4
0.1  
0.145  
0.05  
0.05  
0.05  
0.1  
% Span  
% Span  
% Span  
% Span  
% Span  
mA  
4
14  
14  
15  
15  
5
0.1  
0.5  
1.5  
2.0  
3X  
Response Time (10% to 90%)  
Output Noise  
1.0  
msec  
µV p-p  
M  
6
1.0  
7
Output Load Resistance  
Insulation Resistance (50 VDC)  
Pressure Overload  
5
8
50  
MΩ  
Rated  
9
Operating Temperature  
Storage Temperature  
Media  
–40°C to +125°C  
–50°C to +150°C  
Non-corrosive Gases Compatible with Wetted Materials  
3 Grams  
10  
Weight  
Notes  
1. Output span of unamplified sensor.  
2. Best Fit Straight Line.  
9. 3X or 200 psi maximum, whichever is less. 20 psi for 2 psi and 5 psi  
versions.  
10. Wetted materials are glass, ceramic, silicon, RTV, nickel, gold, and aluminum.  
11. Soldering of lead pins: 250°C for 5 seconds, maximum.  
3. For Model 1230, compensation resistors are an integral part of the  
sensor package; no additional external resistors are required. Pins 7 and  
8 must be kept open.  
12. Tube length: L=470 5 mil, S=300  
3 mil, N=no tube.  
4. Temperature range: -20°C to +85°C in reference to 25°C.  
5. Guarantees input/output ratiometricity.  
6. For a zero-to-full scale pressure step change.  
7. 10 Hz to 1kHz.  
13. Lead pins can either be in the same or the opposite direction as the  
pressure tube. See Connections/Dimensions drawing for lead  
configurations.  
14. Normalized offset bridge voltage: 7 days.  
15. 1 year.  
8. Prevents increase of TC–Span due to output loading.  
CONNECTIONS  
ORDERING INFORMATION  
1230 - 015 G - 3 S  
Pressure Tubes (L, S, N - see note 12)  
Lead Configuration (1, 3 - see note 13)  
Type (G = Gage, A = Absolute, D = Differential)  
Pressure Range  
Model  
APPLICATION SCHEMATIC  
June 2001  
Feel free to contact customer service with any questions at  
Toll free 1(800)745-8008; Phone (757)766-1500; Fax (757)766-4297  
HITs – Wide Temperature Range  
1-19  

相关型号:

1230-050A-1N

Signal Conditioner
ETC

1230-050A-1S

Signal Conditioner
ETC

1230-050A-3L

Signal Conditioner
ETC

1230-050A-3N

Signal Conditioner
ETC

1230-050A-3S

Signal Conditioner
ETC

1230-050D-1L

Signal Conditioner
ETC

1230-050D-1N

Signal Conditioner
ETC

1230-050D-1S

Signal Conditioner
ETC

1230-050D-3L

Signal Conditioner
ETC

1230-050D-3N

Signal Conditioner
ETC

1230-050D-3S

Signal Conditioner
ETC

1230-050G-1L

Signal Conditioner
ETC