16215TNFST6 [ETC]
16 Character by 2 Line Alphanumeric LCD Assembly With COG Controller No internal backlight assembly; 16字符由2号线字母数字LCD组件,带COG控制器没有内部背光组件型号: | 16215TNFST6 |
厂家: | ETC |
描述: | 16 Character by 2 Line Alphanumeric LCD Assembly With COG Controller No internal backlight assembly |
文件: | 总14页 (文件大小:169K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PACIFIC DISPLAY DEVICES
LCD Component Data Sheet
Model Number: 16215
16 Character by 2 Line
Alphanumeric LCD Assembly
With COG Controller
No internal backlight assembly
CONTENTS
1.
GENERAL INFORMATION
1.1 Product Overview
2
2
3
3
3
4
4
5
1.2 Part Numbering System
1.3 Absolute Maximum Ratings
1.4 Circuit Block Diagram
1.5 Mechanical Characteristics
1.6 Input Signal Function
1.7 LCM Contrast Control and Bias
1.8 LCD Dimensions
2.
3.
ELECTRICAL / OPTICAL CHARACTERISTICS
2.1 DC Electrical Characteristics
2.2 AC Electrical Characteristics
2.3 Optical Characteristics
6
6
8
OPERATING PRINCIPALS AND METHODS
3.1 LCD Controller Display and Control Functions
9
4.
5.
RELIABILITY
10
11
PRECAUTIONS FOR USING LCD MODULES
139 Avenida Victoria – Suite 100 – San Clemente, CA – 92672
Tel: 949-361-8957 – Fax: 949-361-9158 – Web: www.pacificdisplay.com
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16215
1. GENERAL INFORMATION
1.1 Product Overview
• 16 Character x 2 line Alphanumeric Dot Matrix LCD Module
• 5V Operation
• LCD Controller: Chip on Glass (COG) NT7603 or equivalent alpha-numeric controller
• 4 Bit and 8 Bit parallel data interface options
• Multiplexing driving: 1/16 duty, 1/4 bias
• Operating Mode: TN (Twisted Nematic) or Super Twisted Nematic (STN) technology
• LCD Module Service Life: 100,000 hours minimum
1.2 Part Numbering System
16215
-SL -R -ST -12
¾ Custom Option Designator
• (Leave Blank)
¾ Operating Mode
• (-GR) STN Green
• (-SL) STN Silver
• (-BN) STN Blue Negative
• (-TN) TN
¾ Rear Polarizer Options:
• (-R) Reflective
• (-F) Transflective
• (-M) Transmissive
¾ Operating Temperature
• (-ST) Standard (0 to +50 ºC)
• (-ET) Extended (-20 to +70 ºC)
¾ Viewing Angle
• (-6) 6 o’clock
• (-12) 12 0’clock
PACIFIC DISPLAY DEVICES
09.29.2003
2
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16215
1.3 Absolute Maximum Ratings
Parameter
Supply voltage for logic
Supply voltage for LCD
Input voltage
Standard Operating temperature
Standard Storage temperature
Extended Operating temperature
Extended Storage temperature
Soldering Temp
Symbol
VDD
VDD – V0
VI
TOP (-ST)
TST (-ST)
TOP (-ET)
TST (-ET)
Tsolder
Min
-0.3
--
-0.3
0
-10
-20
-30
Max
7.0
VDD +0.3
VDD +0.3
50
Unit
V
V
V
ºC
ºC
ºC
ºC
ºC
60
70
80
260
1.4 Circuit Block Diagram
DB0
~
DB7
SEG 80
RS
CONTROLLER
R/W
E
IC
VSS
NT7603
LCD PANEL
16 CHARACTERS x 2 LINES
VDD
VO
COM16
1.5 Mechanical Characteristics
Item
Module size (W×H×T)
Viewing area (W×H)
Character matrix (W×H)
Character size (W×H)
Dot size (W×H)
Contents
Unit
65 x 27.70 x 2.85 Max
61.0 × 15.7
5 × 8
mm
mm
dots
mm
mm
mm
2.95 × 5.15
0.55 × 0.60
0.60 × 0.65
Dot pitch (W×H)
PACIFIC DISPLAY DEVICES
09.29.2003
3
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16215
1.6 Input Signal Function
Pin NO.
Symbol
VSS
VO
VDD
RS
Level
0V
---
5.0V
H/L
H/L
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Ground
Bias voltage for LCD (Contrast)
Supply voltage for logic
H : Data signal, L : Instruction signal
H : Read mode, L : Write mode
Chip enable signal
Data bit 0
R/W
E
H, H → L
H/L
DB0
DB1
DB2
DB3
DB4
DB5
DB6
DB7
H/L
H/L
H/L
H/L
H/L
H/L
H/L
Data bit 1
Data bit 2
Data bit 3
Data bit 4
Data bit 5
Data bit 6
Data bit 7
1.7 LCM Contrast Control and Bias
PACIFIC DISPLAY DEVICES
09.29.2003
4
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16215
1.8 LCM Dimensions (with Cable)
PACIFIC DISPLAY DEVICES
09.29.2003
5
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16215
1.8 LCM Dimensions (without Cable – Reference Only)
PACIFIC DISPLAY DEVICES
09.29.2003
6
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
2. ELECTRICAL / OPTICAL CHARACTERISTICS
MODEL NO: 16215
2.1 DC Electrical Characteristics (VDD = +5V±10% , VSS = 0V, Ta = 25°C )
Parameter
Supply voltage for logic
Supply current for logic
Symbol
VDD
Condition
Min
Typ
5.0
1.0
---
---
---
Max
5.5
1.5
---
VDD
---
Unit
V
mA
V
V
V
---
---
0°C
25°C
50°C
---
4.5
IDD
---
---
0
Operating voltage for LCD
VDD-VO
---
VDD - 2.2
0
Input voltage ' H ' level
Input voltage ' L ' level
VIH
VIL
---
---
VDD
0.8
V
V
---
2.2 AC Electrical Characteristics
• Write Mode
Characteristic
E cycle time
E rise time
E fall time
E pulse width (High, Low)
R/W and RS set-up time (8 Bit)
R/W and RS set-up time (4 Bit)
R/W and RS hold time
Data set-up time
Symbol
Min.
500
---
---
300
60
100
10
100
10
Typ.
---
---
---
---
---
---
---
---
Max.
Unit
ns
ns
ns
ns
ns
ns
ns
ns
Test pin
tC
tr
tf
---
25
25
---
---
---
---
---
---
E
E
E
tW
E
tSU1
tSU1
th1
tSU2
th2
R/W, RS
R/W, RS
R/W, RS
DB0 ~ DB7
DB0 ~ DB7
Data hold time
---
ns
PACIFIC DISPLAY DEVICES
09.29.2003
7
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16215
• Read Mode
Characteristic
Symbol
Min.
500
---
Typ.
---
---
Max.
---
25
Unit
ns
ns
Test pin
E
E cycle time
tC
tr
E rise time
E
E fall time
tf
---
---
25
ns
E
E pulse width
tW
tSU
tSU
th
tD
tDH
300
60
100
10
---
20
---
---
---
---
---
---
---
---
---
---
190
---
ns
ns
ns
ns
ns
ns
E
R/W and RS set-up time (8 Bit)
R/W and RS set-up time (4 Bit)
R/W and RS hold time
Data output delay time
Data hold time
R/W, RS
R/W, RS
R/W, RS
DB0 ~ DB7
DB0 ~ DB7
PACIFIC DISPLAY DEVICES
09.29.2003
8
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16215
2.3 Optical Characteristics (VOP = 4.7V, Ta = 25°C )
Item
Symbol
Condition
Min Typ Max Unit
Remarks
---
Note
Response time
Tr
Tf
Cr
---
---
---
---
---
---
39
35
37
36
180
98
7.5
---
---
---
---
---
---
---
---
---
---
ms
ms
---
deg
deg
deg
deg
1
1
2
3
3
3
3
---
---
∅ = 90°
∅ = 270°
∅ = 0°
∅ = 180°
Contrast ratio
Viewing angle range
θ
Cr ≥ 2
---
Note1: Definition of response time.`
Note2: Definition of contrast ratio ‘Cr’
.
Note3: Definition of viewing angle range ‘θ’.
PACIFIC DISPLAY DEVICES
09.29.2003
9
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16215
3. OPERATING PRINCIPALS AND METHODES
3.1 LCD Controller Display and Control Functions
Please refer to NOVATEK NT7603 DATASHEET.
Pacific Display website: http://www.pacificdisplay.com/ics_app%20notes/novatek/NT7603.pdf
PACIFIC DISPLAY DEVICES
09.29.2003
10
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
4. RELIABILITY
MODEL NO: 16215
Environmental Test
No
Test Item
Content of Test
Test Condition
Applicable
Standard
------
.
1
High temperature
storage
Endurance test applying the high storage
temperature for a long time.
80 °C
200 hrs
2
3
Low temperature
storage
High temperature
operation
Endurance test applying the low storage
temperature for a long time.
Endurance test applying the electric stress
(Voltage & Current) and the thermal stress to
the element for a long time.
Endurance test applying the electric stress
under low temperature for a long time.
Endurance test applying the high temperature
and high humidity storage for a long time.
------
-30 °C
200 hrs
70 °C
200 hrs
------
------
4
5
6
Low temperature
operation
-20 °C
200 hrs
80 °C , 90 %RH
96 hrs
MIL-202E-103B
JIS-C5023
MIL-202E-103B
JIS-C5023
High temperature /
Humidity storage
High temperature /
Humidity operation
Endurance test applying the electric stress
(Voltage & Current) and temperature / humidity 96 hrs
stress to the element for a long time.
70 °C , 90 %RH
7
Temperature cycle
Endurance test applying the low and high
temperature cycle.
-20°C / 70°C
10 cycles
------
-20°C
25°C
70°C
30min.
5min.
30min.
1
Mechanical Test
Endurance test applying the vibration during
transportation and using.
8
Vibration test
Shock test
MIL-202E-201A
JIS-C5025
JIS-C7022-A-10
10∼22Hz → 1.5mmp-p
22∼500Hz → 1.5G
Total 0.5hrs
50G Half sign
wave 1l msec
9
Constructional and mechanical endurance test
applying the shock during transportation.
MIL-202E-213B
3 times of each direction
10
Atmospheric
pressure test
Endurance test applying the atmospheric
pressure during transportation by air.
115 mbar
40 hrs
MIL-202E-105C
Others
11
Static electricity test Endurance test applying the electric stress to the
terminal.
MIL-883B-
3015.1
VS=800V , RS=1.5 kΩ
CS=100 pF
1 time
∗∗∗ Supply voltage for logic system = VDD. Supply voltage for LCD system = Operating voltage at 25°C
LCD Panel Service Life
Definition of panel service life
•
•
•
•
•
100,000 hours minimum at 25° C ±10%
Contrast becomes 30% of initial value
Current consumption becomes three times higher than initial value
Remarkable alignment deterioration occurs in LCD cell layer
Unusual operation occurs in display functions
PACIFIC DISPLAY DEVICES
09.29.2003
11
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
5. PRECAUTIONS FOR USING LCD MODULES
Installing LCD Modules
MODEL NO: 16215
The hole in the printed circuit board is used to fix LCM as shown in the picture below. Attend to the following items when
installing the LCM.
1) Cover the surface with a transparent protective plate to protect the polarizer and LC cell.
2) When assembling the LCM into other equipment, the spacer to the bit between the LCM and the fitting plate
should have enough height to avoid causing stress to the module surface, refer to the individual specifications for
measurements. The measurement tolerance should be ±0.1mm.
Precaution for Handing LCD Modules
Since LCM has been assembled and adjusted with a high degree of precision, avoid applying excessive shocks to the module or
making any alterations or modifications to it.
1) Cover the surface with a transparent protective plate to protect the polarizer and LC cell.
2) Do not alter, modify or change the shape of the tab on the metal frame.
3) Do not make extra holes on the printed circuit board, modify its shape or change the positions of components to
be attached.
4) Do not damage or modify the pattern writing on the printed circuit board.
5) Absolutely do not modify the zebra rubber strip (conductive rubber) or heat seal connector.
6) Except for soldering the interface, do not make any alterations or modifications with a soldering iron.
7) Do not drop, bend or twist LCM.
Electro-Static Discharge Control
Since this module uses a CMOS LSI, the same careful attention should be paid to electrostatic discharge as for an ordinary
CMOS IC.
1) Make certain that you are grounded when handing LCM.
2) Before remove LCM from its packing case or incorporating it into a set, be sure the module and your body have
the same electric potential.
3) When soldering the terminal of LCM, make certain the AC power source for the soldering iron does not leak.
4) When using an electric screwdriver to attach LCM, the screwdriver should be of ground potentiality to minimize
as much as possible any transmission of electromagnetic waves produced sparks coming from the commutator of
the motor.
5) As far as possible make the electric potential of your work clothes and that of the work bench the ground
potential.
6) To reduce the generation of static electricity be careful that the air in the work is not too dried. A relative
humidity of 50%-60% is recommended.
Precaution for soldering to the LCM
1) Observe the following when soldering lead wire, connector cable and etc. to the LCM.
a) Soldering iron temperature : 280°C ± 10°C.
b) Soldering time : 3-4 sec.
2) Solder : eutectic solder.
PACIFIC DISPLAY DEVICES
09.29.2003
12
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16215
3) If soldering flux is used, be sure to remove any remaining flux after finishing to soldering operation. (This does
not apply in the case of a non-halogen type of flux.) It is recommended that you protect the LCD surface with a
cover during soldering to prevent any damage due to flux spatters.
4) When soldering the electroluminescent panel and PC board, the panel and board should not be detached more
than three times. This maximum number is determined by the temperature and time conditions mentioned above,
though there may be some variance depending on the temperature of the soldering iron.
5) When remove the electroluminescent panel from the PC board, be sure the solder has completely melted, the
soldered pad on the PC board could be damaged.
Precautions for Operation
1) Viewing angle varies with the change of liquid crystal driving voltage (VO). Adjust VO to show the best contrast.
2) Driving the LCD in the voltage above the limit shortens its life.
3) Response time is greatly delayed at temperature below the operating temperature range. However, this does not
mean the LCD will be out of the order. It will recover when it returns to the specified temperature range.
4) If the display area is pushed hard during operation, the display will become abnormal. However, it will return to
normal if it is turned off and then back on.
5) Condensation on terminals can cause an electrochemical reaction disrupting the terminal circuit. Therefore, it
must be used under the relative condition of 40°C , 50% RH.
6) When turning the power on, input each signal after the positive/negative voltage becomes stable.
Safety
•
If the LCD panel breaks, be careful not to get the liquid crystal in your mouth. If the liquid crystal touches your skin
or clothes, wash it off immediately using soap and plenty of water.
Handling
•
•
The display panel is made of glass. Do not subject it to a mechanical shock by dropping it or impact.
If the display panel is damaged and the liquid crystal substance leaks out, be sure not to get any in your mouth. If the
substance contacts your skin or clothes, wash it off using soap and water.
•
•
Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary.
The polarizer covering the display surface of the LCD module is soft and easily scratched. Handle this polarizer
carefully.
•
If the display surface becomes contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If it is
heavily contaminated, moisten cloth with one of the following solvents :
o
o
Isopropyl alcohol
Ethyl alcohol
•
Solvents other than those above-mentioned may damage the polarizer. Especially, do not use the following.
o
o
o
Water
Ketone
Aromatic solvents
•
•
Exercise care to minimize corrosion of the electrode. Corrosion of the electrodes is accelerated by water droplets,
moisture condensation or a current flow in a high-humidity environment.
Install the LCD Module by using the mounting holes. When mounting the LCD module make sure it is free of
twisting, warping and distortion. In particular, do not forcibly pull or bend the I/O cable or the backlight cable.
Do not attempt to disassemble or process the LCD module.
•
•
•
NC terminal should be open. Do not connect anything.
If the logic circuit power is off, do not apply the input signals.
PACIFIC DISPLAY DEVICES
09.29.2003
13
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
MODEL NO: 16215
•
To prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment.
o
o
o
Be sure to ground the body when handling the LCD modules.
Tools required for assembling, such as soldering irons, must be properly grounded.
To reduce the amount of static electricity generated, do not conduct assembling and other work under dry
conditions.
o
The LCD module is coated with a film to protect the display surface. Exercise care when peeling off this
protective film since static electricity may be generated.
Storage
•
•
•
•
When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent lamps
Store the module in a dark place where the temperature is 25 oC ±10 oC and the humidity below 65% RH.
Do not store the module near organic solvents or corrosive gases.
Do not crush, shake, or jolt the module (including accessories).
Cleaning
•
•
•
Do not wipe the polarizing plate with a dry cloth, as it may scratch the surface.
Wipe the module gently with soft cloth soaked with a petroleum benzene.
Do not use ketonic solvents (ketone and acetone) or aromatic solvents (toluene and xylene), as they may damage the
polarizing plate.
Others:
•
Liquid crystals solidify under low temperature (below the storage temperature range) leading to defective orientation
or the generation of air bubbles (black or white). Air bubbles may also be generated if the module is subject to a low
temperature.
•
If the LCD modules have been operating for a long time showing the same display patterns, the display patterns may
remain on the screen as ghost images and a slight contrast irregularity may also appear. A normal operating status can
be regained by suspending use for some time. It should be noted that this phenomenon does not adversely affect
performance reliability.
•
To minimize the performance degradation of the LCD modules resulting from destruction caused by static electricity
etc., exercise care to avoid holding the following sections when handling the modules.
-
-
Exposed area of the printed circuit board.
Terminal electrode sections.
PACIFIC DISPLAY DEVICES
09.29.2003
14
相关型号:
16215TNMET12
16 Character by 2 Line Alphanumeric LCD Assembly With COG Controller No internal backlight assembly
ETC
16215TNMET6
16 Character by 2 Line Alphanumeric LCD Assembly With COG Controller No internal backlight assembly
ETC
16215TNMST12
16 Character by 2 Line Alphanumeric LCD Assembly With COG Controller No internal backlight assembly
ETC
16215TNMST6
16 Character by 2 Line Alphanumeric LCD Assembly With COG Controller No internal backlight assembly
ETC
16215TNRET12
16 Character by 2 Line Alphanumeric LCD Assembly With COG Controller No internal backlight assembly
ETC
16215TNRET6
16 Character by 2 Line Alphanumeric LCD Assembly With COG Controller No internal backlight assembly
ETC
16215TNRST12
16 Character by 2 Line Alphanumeric LCD Assembly With COG Controller No internal backlight assembly
ETC
16215TNRST6
16 Character by 2 Line Alphanumeric LCD Assembly With COG Controller No internal backlight assembly
ETC
©2020 ICPDF网 联系我们和版权申明