18-013-993 [ETC]
GAUGE PRESSURE ; 表压\nPressure Gauges
Pressure Gauges
● Monitor pressures in compressed air systems for
R1/
8
, G1/
8
A, 1/
x 18 N.P.T.
4
optimum efficiency
● Dual calibrated dials, available for direct or panel
mounting
● Choice of pressure ranges
● Conform to BS 1780 : Part 2, Industrial Class 2
● Range includes Miniature type, 40 mm, pressure
gauge suitable for use with Norgren Olympian
Series 10 and miniature units
Technical Data
Medium:
Compressed air, oil and gases or liquids which do not corrode
copper alloys
Port Connections
R1/8, G1/8A, 1/4 x 18 N.P.T.
Operating Temperature:
–20˚C* to +60˚C
Consult our Technical Service for use below +2˚C
*
Operating Pressure:
0 - 1,6 bar
0 - 4 bar
Alternative Models
Stainless steel case with brass movements
0 - 6 bar
0 - 10 bar
0 - 25 bar
Materials
Steel, plastic or stainless steel body. Glass or plastic face.
Copper/brass or stainless steel movements.
Full details available on request.
Ordering Information
To order a standard Pressure Gauge, quote model number
from table overleaf.
For non-standard models please consult our Technical Service.
1/90
8.11.031.01
Pressure Gauges
Standard Pressure Gauges
Connection/Type
Pressure Range
(bar)
Port Connection
Nominal Diameter†
Model
Weight kg
0 - 1,6
0 - 4
R1/8
R1/8
R1/8
R1/8
R1/8
1/4 x 18 N.P.T.
R1/8
1/4 x 18 N.P.T.
1/4 x 18 N.P.T.
R1/8
50
50
50
50
50
40
40
40
40
40
40
40
62
62
62
62
62
50
50
50
50
50
18-013-010
18-013-011
18-013-012
18-013-013
18-013-014
18-013-905*
18-013-908
18-013-909*
18-013-913*
18-013-989
18-013-990
18-013-991
18-013-992
18-013-993
18-013-994
18-013-995
18-013-996
18-013-024
18-013-025
18-013-026
18-013-027
18-013-028
0,83
0,83
0,83
0,83
0,83
0,93
0,67
0,80
0,21
0,05
0,05
0,04
0,14
0,13
0,14
0,13
0,14
0,67
0,63
0,86
0,87
0,90
Centre back
0 - 6
0 - 10
0 - 25
0 - 25
0 - 25
0 - 10
0 - 6
Centre back
(miniature)
0 - 10
0 - 4
R1/8
R1/8
0 - 1,6
0 - 25
0 - 10
0 - 6
G1/8A
G1/8A
G1/8A
G1/8A
G1/8A
R1/8
R1/8
R1/8
R1/8
R1/8
Centre back
(panel mounted)
0 - 4
0 - 1,6
0 - 1,6
0 - 4
Bottom
0 - 6
0 - 10
0 - 25
†Actual case diameter may exceed nominal diameter by 5 mm.
*Stainless steel cases with stainless steel movements for 22 Series range. All stainless steel gauges are not strictly to NACE standard MR-01-75.
Non-standard Models
For Pressure Gauges with stainless steel cases and brass movements or other options, please consult our Technical Service.
Centre Back Mounted Pressure Gauges
18-013-010
18-013-011
18-013-012
18-013-013
18-013-014
R1/8
R1/8
R1/8
R1/8
R1/8
+
14.2 0.2
33
7.0
-
л50
8 max
4
8.11.031.02
Pressure Gauges
Miniature Centre Back Mounted Pressure Gauges
18-013-905
1/4 x 18 N.P.T.
R1/8
1/4 x 18 N.P.T.
1/4 x 18 N.P.T.
R1/8
R1/8
R1/8
18-013-908
18-013-909
18-013-913
18-013-989
18-013-990
18-013-991
42.3
12.7
24
л40
Centre Back Panel Mounted Pressure Gauges
18-013-992
18-013-993
18-013-994
18-013-995
18-013-996
G1/8 A
G1/8 A
G1/8 A
G1/8 A
G1/8 A
9.5 max
6
л62
23
57 max
1/90
8.11.031.03
Pressure Gauges
Bottom Mounted Pressure Gauges
18-013-024
18-013-025
18-013-026
18-013-027
18-013-028
R1/8
R1/8
R1/8
R1/8
R1/8
28
л50
R 1/8
9.5
14
Warning
These products are intended for use in industrial compressed air systems only. Do not
use these products where pressures and temperatures can exceed those listed under
‘Technical Data’.
Before using these products with fluids other than those specified, for non-industrial
applications, life-support systems, or other applications not within published
specifications, consult NORGREN MARTONAIR.
Through misuse, age, or malfunction, components used in fluid power systems can fail in
various modes. The system designer is warned to consider the failure modes of all
component parts used in fluid power systems and to provide adequate safeguards to
prevent personal injury or damage to equipment in the event of such failure.
System designers must provide a warning to end users in the system instructional
manual if protection against a failure mode cannot be adequately provided.
System designers and end users are cautioned to review specific warnings found in
instruction sheets packed and shipped with these products.
8.11.031.04
相关型号:
18-10%-FA1-20PPM-AMMOPACK
Fixed Resistor, Wire Wound, 1W, 18ohm, 44V, 10% +/-Tol, -20,20ppm/Cel,
VISHAY
18-10%-FA3/4-20PPM-CARDPACK
Fixed Resistor, Wire Wound, 0.75W, 18ohm, 32V, 10% +/-Tol, -20,20ppm/Cel,
VISHAY
18-10%-FA4-20PPM-AMMOPACK
Fixed Resistor, Wire Wound, 4W, 18ohm, 210V, 10% +/-Tol, -20,20ppm/Cel,
VISHAY
18-10%-FA4-20PPM-CARDPACK
Fixed Resistor, Wire Wound, 4W, 18ohm, 210V, 10% +/-Tol, -20,20ppm/Cel,
VISHAY
18-10%-FA4B-20PPM-AMMOPACK
Fixed Resistor, Wire Wound, 4W, 18ohm, 210V, 10% +/-Tol, -20,20ppm/Cel,
VISHAY
©2020 ICPDF网 联系我们和版权申明