1865A0101000 [ETC]
25 AWG stranded (19x37) .021 bare copper conductor, gas-injected foam HDPE insulation;
| 型号： | 1865A0101000 |
| 厂家： | 
ETC |
| 描述： | 25 AWG stranded (19x37) .021 bare copper conductor, gas-injected foam HDPE insulation |
| 文件： | 总4页 (文件大小：32K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1865A Coax - Sub-Miniature
For more information please
call
1-800-Belden1
See Put-ups and Colors
Description:
25 AWG stranded (19x37) .021" bare copper conductor, gas-injected foam HDPE insulation, Duofoil® + tinned copper braid shield (95%
coverage), PVC jacket.
PHYSICAL CHARACTERISTICS:
CONDUCTOR:
Number of Coax
Total Number of Conductors
RG Type
1
1
Sub-miniature 59/U
25
AWG
Stranding
19x37
Conductor Diameter
Conductor Material
.021 in.
BC - Bare Copper
INSULATION:
Insulation Material
Insulation Diameter
Gas-injected FHDPE - Foam High Density Polyethylene
.094 in.
OUTER SHIELD:
Outer Shield Material Trade Name
Outer Shield Type
Duofoil®
Tape/Braid
Outer Shield Material :
Layer Number
Trade Name
Duofoil®
Type
Material
% Coverage (%)
1
Tape
Aluminum Foil-Polyester 100
Tape-Aluminum Foil
2
Braid
TC - Tinned Copper
95
Outer Shield %Coverage
OUTER JACKET:
100 %
Outer Jacket Material
PVC - Polyvinyl Chloride
.150 in.
OVERALL NOMINAL DIAMETER:
Overall Nominal Diameter
MECHANICAL CHARACTERISTICS:
Operating Temperature Range
UL Temperature Rating
-40°C To +75°C
75°C
Page 1 of 4
1865A Coax - Sub-Miniature
Bulk Cable Weight
16 lbs/1000 ft.
30 lbs.
Max. Recommended Pulling Tension
Min. Bend Radius (Install)
1.5 in.
APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE:
APPLICABLE STANDARDS:
NEC/(UL) Specification
CMR
CMG
Yes
CEC/C(UL) Specification
EU CE Mark (Y/N)
EU RoHS Compliant (Y/N)
EU RoHS Compliance Date (mm/dd/yyyy):
Yes
01/01/2004
FLAME TEST:
UL Flame Test
UL1666 Vertical Shaft
SWEEP TEST:
Sweep Testing
100% Sweep tested 5 MHz to 3 GHz.
SUITABILITY:
Suitability - Indoor
Suitability - Outdoor
Suitability - Aerial
Suggested Connectors
Yes
Yes - Black Only
Yes - Black only, when supported by a messenger wire
BNC - Kings 2025-47-9
PLENUM/NON-PLENUM:
Plenum (Y/N)
N
ELECTRICAL CHARACTERISTICS:
Nom. Characteristic Impedance
Nom. Inductance
75 Ohms
.093 µH/ft
Nom. Capacitance Conductor to Shield
Nominal Velocity of Propagation
Nominal Delay
16.5 pF/ft
82 %
1.24 ns/ft
Nom. Conductor DC Resistance @ 20 Deg. C
Nominal Outer Shield DC Resistance @ 20 Deg.C
Minimum Return Loss :
27.4 Ohms/1000 ft
5.4 Ohms/1000 ft
Description
Frequency (MHz)
Start Frequency (MHz) Stop Frequency (MHz)
Minimum Return Loss
(dB)
5
850
21
18
851
3000
Nom. Attenuation :
Page 2 of 4
1865A Coax - Sub-Miniature
Description
Frequency (MHz)
Start Frequency (MHz) Stop Frequency (MHz)
Nom. Attenuation
(dB/100 ft.)
1
.47
3.58
5
1.0
1.1
7
1.3
10
1.6
67.5
71.5
88.5
100
135
143
180
270
360
540
720
750
1000
1500
2000
2250
3000
3.6
3.7
4.1
4.4
5.0
5.1
5.8
7.1
8.2
10.1
11.8
12.0
13.9
17.0
19.6
20.8
24.0
Max. Operating Voltage - UL
300 V RMS
Other Electrical Characteristic 1
Impedance tested in accordance with ASTM D-4566 paragraph 43.2, option 2 using
a 75 Ohm fixed bridge and termination. 75 +/- 1.5 Ohms
Other Electrical Characteristic 2
Return Loss tested in accordance with ASTM D-4566 paragraph 45.3, using a 75
Ohm fixed bridge and termination.
PUT-UPS AND COLORS:
Item
Description
Put-Up (ft.)
Ship Weight (lbs.)
Jacket Color
Notes
1865A 0011000
#25 GIFHDPE SH
FR PVC
1000
14
BROWN
C
1865A 0021000
1865A 0031000
1865A 0041000
1865A 0061000
1865A 0071000
1865A 0081000
1865A 0091000
#25 GIFHDPE SH
FR PVC
1000
1000
1000
1000
1000
1000
1000
14
14
14
14
14
14
14
RED
C
#25 GIFHDPE SH
FR PVC
ORANGE
YELLOW
BLUE, LIGHT
VIOLET
GRAY
#25 GIFHDPE SH
FR PVC
#25 GIFHDPE SH
FR PVC
C
C
#25 GIFHDPE SH
FR PVC
#25 GIFHDPE SH
FR PVC
#25 GIFHDPE SH
FR PVC
WHITE
C
Page 3 of 4
1865A Coax - Sub-Miniature
1865A 0101000
1865A N3U1000
#25 GIFHDPE SH
FR PVC
1000
1000
14
14
BLACK
C
#25 GIFHDPE SH
FR PVC
GREEN, MIL
C = CRATE REEL PUT-UP.
Revision Number: 3 Revision Date: 08-24-2005
© Copyright 2006 Belden, Inc
All Rights Reserved.
Although Belden ("Belden") makes every reasonable effort to ensure their accuracy at the time of this publication, information and
specifications described herein are subject to error or omission and to change without notice, and the listing of such information and
specifications does not ensure product availability.
Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express,
statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or
exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract,
negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described
herein.
All sales of Belden products are subject to Belden's standard terms and conditions of sale.
Belden believes this product to be in compliance with the following environmental regulations: California Proposition 65 Consent Judgment
For Wire & Cable Mfgs.(San Francisco Superior Court Nos. 312962 And 320342); EU RoHS (Directive 2002/95/EC, 27-Jan-
2003);Material manufactured prior to the compliance date may still be in stock at Belden facilities and in our Distributor's inventory. EU
ELV (Directive 2000/53/EC, 18-Sept-2000); EU WEEE (Directive 2002/96/EC, 27-Jan-2003); And EU BFR (Directive 2003/11/EC, 6-Feb-
2003). The information provided in this Product Disclosure, and the identification of materials listed as reportable or restricted within the
Product Disclosure, is correct to the best of Belden's knowledge, information and belief at the date of its publication. The information
provided in the Product Disclosure is designed only as a general guide for the safe handling, storage, and any other operation of the product
itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality specification. Regulatory
information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations
based on their individual usage of the product.
Belden declares this product to be in compliance with EU LVD (Low Voltage Directive 73/23/EEC), as amended by directive 93/68/EEC.
Page 4 of 4
相关型号：
1865AN3U1000
25 AWG stranded (19x37) .021 bare copper conductor, gas-injected foam HDPE insulation
ETC
©2020 ICPDF网 联系我们和版权申明