2010B5771-05 [ETC]
Picea 2.4 GHz Swivel Antenna;
| 型号： | 2010B5771-05 |
| 厂家： | 
ETC |
| 描述： | Picea 2.4 GHz Swivel Antenna |
| 文件： | 总10页 (文件大小：787K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Picea 2.4 GHz Swivel Antenna
Product Specification
1 Features
•
•
•
Designed for 2.4 GHz applications [Bluetooth™, WiFi™ (802.11b/g), Zigbee™, WiMedia™ etc.]
Intended for snap-in mounting
Supplied in bulk
2 Description
The Picea antenna is intended for use with all 2.4 GHz applications. The antenna is intended for snap-in
mounting. The blade is made of a flexible material and can be rotated 360 degrees.
3 Application
•
•
•
•
•
Development tools
Test equipment
Instruments
Access points and gateways
Printers
Integrated Antenna Solutions
ꢀ
Product Specification AE020033-C
Picea 2.4 GHz Swivel Antenna
Contents
1 Features
ꢀ
ꢀ
ꢀ
3
3
3
4
4
4
4
5
5
6
6
6
7
7
7
7
7
8
9
9
9
9
2 Description
3 Application
4 Model name
5 General data
6 Electrical characteristics
7 Electrical performance
7.1 Voltage Standing Wave Ratio
7.2 3D-Radiation
7.3 Radiation patterns
8 Antenna Dimensions
9 Antenna Foot print
10 Electrical interface
10.1 Transmission line and matching
10.2 Test board dimensions
10.3 Test board matching
11 Reliability
11.1 Temperature and Humidity
11.2 Judgement standard
12 Hazardous Material Regulation Conformance
13 Application example
14 Packaging
14.1 Shelf storage recommendation
14.2 Packaging characteristics
14.3 Bag label information
Integrated Antenna Solutions
2
Product Specification AE020033-C
Picea 2.4 GHz Swivel Antenna
4 Model name
20 10 B5771 - XX
PCB Thickness
01 = 0.8 mm
02 = 1.0 mm
03 = 1.2 mm
04 = 1.6 mm
05 = 1.8 mm
Drawing No.
Technology
-Metal
Antenna Family
-Swivel
5 General data
Product Name
Article No.
Picea 2.4 GHz
2010B5771-01..05
2.4-2.5 GHz
Frequency
Polarization
Linear
Operating temperature
Impedance
-40 to + 85 degC
50 Ohm
Weight
3.2 gram
Antenna type
Swivel
6 Electrical characteristics
Characteristics
Conditions*
Min
Typ
4.1 dBi
60%
Max
Peak Gain
Efficiency
VSWR
Frequency 2.4-2.5 GHz, Measured in 3D chamber ( near field)
Frequency 2.4-2.5 GHz, Measured in Network Analyzer
<2:1
*Note all data provided in this table are based on the Antenova reference board
Integrated Antenna Solutions
3
Product Specification AE020033-C
Picea 2.4 GHz Swivel Antenna
7 Electrical performance
7.1 Voltage Standing Wave Ratio
VSWR
* HP9770 Network Analyzer
3:1
2:1
1:1
2.4
2.45
2.5 GHz
7.2 3D-Radiation
2.9
20
15
10
5
-2.54
-7.99
-13.44
-18.89
-24.33
0
-5
-10
-15
-20
20
10
20
10
0
0
Y
-10
-10
X
-20
-20
dBi
7.3 Radiation patterns
XY- Plane
XZ- Plane
YZ- Plane
0
90
0
15 dBi
15 dBi
330
30
120
60
330
30
15 dBi
5 dBi
5 dBi
5 dBi
-5 dBi
-5 dBi
- 5 dBi
300
60
150
30
300
60
-15 dBi
Z
-15 dBi
-15 dBi
-25 dBi
-35 dBi
Z
Y
-25 dBi
-25 dBi
-35 dBi
-35 dBi
Total
Y
X
270
90
180
X
0
270
90
polarization
240
120
210
330
240
120
2.40 GHz
2.45 GHz
2.50 GHz
2.40 GHz
2.45 GHz
2.50 GHz
210
150
240
300
2.40 GHz
2.45 GHz
2.50 GHz
210
150
180
270
180
Integrated Antenna Solutions
4
Product Specification AE020033-C
Picea 2.4 GHz Swivel Antenna
8 Antenna Dimensions
W
2
L
ꢀ
L
2
T
3
H
2
H
ꢀ
T
2
T
ꢀ
F
2
F
ꢀ
Antenna fitted on PCB
W
ꢀ
B
L1
L2
W1
W2
H1
H2
F1
F2
T1
T2
T3
B
PCBꢁ
Thickness*
Length Length Width Width Height Height Feed
Feed
48.3 ±0.3 49.5 ±0.3 12±0.2
Dimensions in millimeters
7.0±0.2 8.55±0.2 7.1±0.2 3.55±0.2 6.0±0.2
T1±0.05
2.1±0.2 8.0±0.2 14.9±0.2
*PCB Thickness (T) : 0.8, 1.0, 1.2, 1.6, 1.8 mm
9 Antenna Foot print
F1
F2
F3
F4
S1
P1/P2 P3/P4
D1
D2
T
T1
T2
T3
Feed
Feed
Feed
Feed
Snap-In Position Position
Diam.
Diam.
Thickness*
4.0±0.1 6.0 ±0.1 2.0±0.1 2.25±0.1 12.5±0.1 3.25±0.1 3.0±0.1 1.8+0.1 3.1+0.1
Dimensions in millimeters
T
3.0±0.1 4.5±0.1 Max 7.2
Integrated Antenna Solutions
5
Product Specification AE020033-C
Picea 2.4 GHz Swivel Antenna
10 Electrical interface
10.1 Transmission line and matching
Typical config. 2
Typical config. 1
Component types
Inductor
Capacitor
The matching network has to be individually designed using one, two or three components.
Strip line
Component
Module
DC Block
The schematic picture describes the radio module and the matching network.The matching network shall be
designed as a PI net. The antenna acts as an active part of the device, the number and value of matching
components will be unique for your application.
10.2 Test board dimensions
The testboard is designed for evaluation purposes for the Picea 2.4 GHz. The card has the same size as a
typical PCMCIA card. The board is fitted with an SMA connector.
Integrated Antenna Solutions
6
Product Specification AE020033-C
Picea 2.4 GHz Swivel Antenna
10.3 Test board matching
Series conductor 2.8pF
Shunt inductor 1.8 nH
The testboard is matched with above specified components.
Note! The component values will vary depending on size of PCB board, surrounding
components etc.
11 Reliability
11.1 Temperature and Humidity
Item
Operating
Standard
Low
High
Duration
EN/IEC 60068-2-2, ꢁ
Test Bd: Dry heat
-30 degC
+90 degC
-
temperature
EN/IEC 60068-2-14, ꢁ
Test Na: Change of temperature
Temperature cycling
-40 degC
+90 degC
500 cycles / 10 min
500 h
Storage lifeꢁ
Humidity
EN/IEC 60068-2-1, ꢁ
Test Ca: Damp heat
+60 degC / 90% RH
Storage lifeꢁ
Low temperature
EN/IEC 60068-2-1, ꢁ
Test Ad: Cold
-55 degC
-
-
500 h
Storage lifeꢁ
High temperature
EN/IEC 60068-2-2, ꢁ
Test Bb: Dry heat
+125 degC 500 h
11.2 Judgement standard
The judgement of the above tests should be made as follows:
1. Visual inspection - Normal apperance with no obvious cracking, peeling-off.
2. Electrical inspection - The DUT satisfies the VSWR specification throughout the 2.4-2.5 GHz band.
12 Hazardous Material Regulation Conformance
Cadmium and cadmium compound.
Organic brominated compound (PBB, PBDE)
Polychlorinated biphenyl (PCB)
Polychlorinated naphthalene (PCN)
Organic tin compound
Lead and lead compound
Mercury and mercury compound
Sexivalent chrome compound
Chlorinated paraffin (CP)
Mirex
Asbestos
Formaldehyde
Azo compound
Tetra-bromo-bisphenol-A-bis (TBBP-A-bis)
Integrated Antenna Solutions
7
Product Specification AE020033-C
Picea 2.4 GHz Swivel Antenna
13 Application example
3
4
5
FRONT SURFACE
BACK SURFACE
1
6
2
t
W
2.4 GHz
Module
Strip line
h
7
Ground
No crossing strip lines
Clearance area
Ground plane area
Fig. 1
1. Placement of antenna
The antenna shall preferably be placed at the edge of the PCB oriented as above so that the antenna
blade can be placed outside the application’s casing. Other placements and orientations and size
of grounplanes are possible, but this will affect the performance. Avoid active components near the
antenna.
2. Placement of 2.4 GHz module
To avoid losses the module shall be placed as close to the antenna as possible.
3. Strip lineꢁ
The strip line must be dimensioned according to your specific PCB. (see fig 1). No crossing strip lines
are allowed between the strip line and its ground plane.
4. Via connections
To avoid spurious effects, via connections must be made to analogue ground.
5. Component matchingꢁ
Component values are depending on antenna placement, PCB dimensions and location of other
components.
6. DC Blockꢁ
Might be needed depending on RF Module configuration.
7. Clearence area
Avoid components and parts close to the antenna.
Note! Incorrect implementation of the antenna will affect the performance.
Contact Antenova for implementation services.
Integrated Antenna Solutions
8
Product Specification AE020033-C
Picea 2.4 GHz Swivel Antenna
14 Packaging
14.1 Shelf storage recommendation
Temperature
Humidity
-10 to +40 degree C
Less than 75% RH
Shelf Life
48 Months
Storage place
Away from corrosive gas and direct sunlight
14.2 Packaging characteristics
The antennas are delivered in bulk enclosed in plastic bags
14.3 Bag label information
®
antenova
Antenova
ꢁ
ꢁ
ꢁ
Integrated Antenna Solutions
9
Product Specification AE020033-C
www.antenova.com
Corporate Headquarters
Asia Headquarters
Antenova Ltd.
Far Field House
Albert Road
Stow-cum-Quy
Cambridge
Antenova Asia Ltd.
3F, No 10, Alley 6, Lane 45
Poa Shing Road
Hsin Tien City
Taipe County
CB9 5AR
ROC 23145
Tel:
Fax:
+44 (0) 1223 810600
+44 (0) 1223 810650
Tel:
Fax:
+886 (0) 2 2917 6536
+886 (0) 2 2910 6546
Email: info@antenova.com
Email: info@antenova.com
Sales Offices
Europe
America
Asia
Charlotta Olander
UK/EU Sales Manager
David Nuti
NA Sales Manager
CL Lim
VP Sales Asia
Tel:
+46 702 913731
Tel:
+1 214 668 0357
Tel:
+886 (0) 931 201 318
Email: Lotta.Olander@antenova.com Email: David.Nuti@antenova.com
Email: CL.Lim@antenova.com
Integrated Antenna Solutions
10
Product Specification AE020033-C
相关型号：
©2020 ICPDF网 联系我们和版权申明