2510A-032 [ETC]
FIBER OPTIC RECEIVER ; 光纤接收器\n型号: | 2510A-032 |
厂家: | ETC |
描述: | FIBER OPTIC RECEIVER
|
文件: | 总8页 (文件大小:159K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Data Sheet
June 2001
Wideband Photodiode Receivers
Features
■ Wide-band analog signal reception
■ Single-mode fiber pigtail
■ High optical return loss
■ Up to 20 GHz bandwidth
■ 1310 nm and 1550 nm sensitivity
Applications
■ Antenna remoting
■ Cellular and PCS networks
■ Military triband communications
■ TT and C
Description
The family of wideband photodiode receivers are ide-
ally suited for use in analog fiber-optic communica-
tions. With their wide bandwidth and flat response,
these devices are used in a wide array of applica-
tions, including antenna remoting, timing and refer-
ence signal distribution, measurement, delay lines,
and two-way communications.
Several packaging styles are available for these
wideband photodiodes. The most basic package, the
photodiode module, contains the photodiode chip,
optical fiber pigtail, and impedance-matched electri-
cal connections in a hermetically sealed unit. Of par-
ticular note is the high optical return loss, which
enables high-quality noise performance for sensitive
optical links.
Data Sheet
June 2001
Wideband Photodiode Receivers
for integration with Agere Systems Inc.’s System 10000
rack-mountable chassis and power supplies. Electron-
ics within flange-mount and plug-in receivers provide a
reverse bias for the photodiodes and monitor the dc
level of the optical input power, thus providing a fully
integrated wideband product.
Description (continued)
In most cases, the basic photodiode module is inte-
grated into a complete receiver, packaged either as a
flange-mount for extreme environments, or as a plug-in
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are abso-
lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess
of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended
periods can adversely affect device reliability.
Parameter
Symbol
Min
Max
Unit
Operating Temperature Range:
Modules and Flange-mount
Plug-ins
TOP
–40
0
70
50
°C
°C
Storage Temperature Range:
Modules and Flange-mount
Plug-ins
Tstg
PIN
–40
–20
85
65
°C
°C
Input Power:
2510A/B, 2515A.B, 1516A/B/C
2518A/B
2.0 (typ)
15
2.5
16
mW
mW
Maximum Power for 60 s:
2510A/B, 2515A.B, 1516A/B/C
2518A/B
PMAX
Idc
—
—
4
16
mW
mW
dc Current:
2510A/B, 2515A/B, 1516A/B/C
2518A/B
—
—
2
12
mA
mA
Characteristics
Table 1. Optical Characteristics
Package Type
Device Code
Module
2510A/B1
4510A/B1
2515A/B1
4515A/B1
10455A/B1
2516A/B/C1
4516A/B/C1
10456A/B/C1
2518A/B
4518A/B
10458A/B
Flange-Mount Receiver
Plug-in Receiver, for 19 in. rack system
10450A/B1
Parameters
Specifications
dc Photodiode Responsivity
at 1310 nm, 25 °C
>0.75 A/W
>0.38
>0.75 A/W
>0.65 A/W
>0.70 A/W
>0.35
RF Receiver Efficiency (typ)
at 1 GHz2
>0.38
>0.33
Optical Return Loss3
>45 dB
>1 m, 9 µm/125 µm single-mode SMF-284 or equivalent
Pigtail Fiber Type (where applicable)
1. Specified for <2 mW optical power, <50% modulation depth.
2. The photodiode RF current splits evenly between the internal matching resistor and the external load. (See Agere Systems’ System
Designer’s Guide to RF and Wideband Fiber Optics.)
3. Optical return loss specified for FC-APC connectors or fusion splices only. Other connection methods can degrade optical return loss.
4. SMF-28 is a trademark of Corning Incorporated.
2
2
Agere Systems Inc.
Data Sheet
June 2001
Wideband Photodiode Receivers
Characteristics (continued)
Table 2. RF Characteristics
Package Type
Device Code
2516A/B/C
Module
2510A/B
4510A/B
10450A/B
2515A/B
4515A/B
10455A/B
2518A/B
4518A/B
10458A/B
Flange-Mount Receiver
Plug-in Receiver (for 19 in.
rack system)
4516A/B/C
10456A/B/C
Parameters
Specifications
Maximum Frequency:
A Version
3 GHz
6 GHz
—
10 GHz
12 GHz
—
20 GHz
18 GHz
15 GHZ
15 GHz
10 GHz
—
B Version
C Version
Minimum Frequency
Output Coupling
0.1 GHz
dc
0.1 GHz
ac
1 GHz
ac
0.5 GHz
ac
Amplitude Flatness1
±2.0 dB
±2.0 dB
±2.0 dB
±2.0 dB
Output VSWR, Max
2.0:1
2.5:1
0.1—6 GHz
—
0.1 GHz—10 GHz
10 GHz—12 GHz
1 GHz —18 GHz
18 GHz— 20 GHz
0.5 GHz—15 GHz
—
Output Impedance
50 Ω
RF Connector for Module
SMA (F)
SMA (F)
K-connector 2
K-connector 2
RF Connector for Flange-
Mount and Plug-in
SMA (F)
1. Relative to value at 1 GHz.
2. K-connector is a trademark of Anritsu Company. It is a high-speed and SMA-compatible connector.
Table 3. dc Power for Flange-mount and Plug-ins (45xx and 104xx Receivers)
Parameter
Symbol
Min
Typ
Max
Unit
dc Power for Flange-mount and Plug-ins
(Models 45xx and 104xx)1: Pin 1
Pdc
—
15 nominal
at 0.2 A max
—
V
1. For photodiode module CDC requirements, contact an Agere Systems’ account manager for OEM data sheet.
3
Agere Systems Inc.
Data Sheet
June 2001
Wideband Photodiode Receivers
2510A/B, 2515A/B Wideband Photodiode Receivers
Outline Diagram
Dimensions are in inches and (millimeters).
0.49
(12)
RF
OUTPUT
0.66
(17)
FIBER PIGTAIL
1.33 (34)
E
A
C
H
0.42
(11)
0.23
(6)
B
F
D
7-PIN MINIATURE
RECTANGULAR
1-1192 (F)
Pin Information
H
F
E
D
C
B
A
Table 4. Seven-pin Connector
Pin No.
Description
A
B
C
D
E
F
NC
NC
PIN PHOTODIODE
RF
OUT
NC
50
Ω
NC
Bias
Ground
NC
1-1194 (F)
H
Figure 1. 2510A/B Electrical Schematic
H
F
E
D
C
B
A
130 pF 25
PIN
Ω
RF
OUT
50
Ω
PHOTODIODE
1-1194 (F)
Figure 2. 2515A/B Electrical Schematic
4
Agere Systems Inc.
Data Sheet
June 2001
Wideband Photodiode Receivers
2516A/B, 2518A/B Wideband Photodiode Receivers
Outline Diagram
Dimensions are in inches and (millimeters).
0.26
(6.7)
1.24 (32)
1.04 (26)
0.10 (2.5)
0.39
(10)
0.84 (21)
0.20 (5)
0.58
(15)
0.78
(20)
Ø.094 (2.4)
0.20
(5)
0.10
(2.5)
K-CONNECTOR
0.15
(4)
0.41
(10)
PIN 1
0.04
(1)
0.174
(4.4)
1-1193 (F)
Pin Information
VBIAS
Table 5. Six-pin Connector
Pin No.
Description
150 Ω
1
2
3
4
5
6
NC
NC
NC
Bias
NC
RF
OUT
Ground
50 Ω
1-1195 (F)
Figure 3. 2516A/B, 2518A/B Electrical Schematic
Agere Systems Inc.
5
Data Sheet
June 2001
Wideband Photodiode Receivers
45XX, 104xx Wideband Photodiode Receivers
45xx Outline Diagram (Dimensions are in inches and (millimeters).)
RF OUT
SMA (F)
dc CONNECTOR
9-PIN D-SUB (M)
Ø.12 (3)
5.00
(127)
4.25
(108)
2.13
(54)
0.38
(10)
0.20 (5)
5.60 (142)
6.00 (152)
1.50
(38)
POWER
ON
OPTICAL
IN
1-1191 (F)
0.12 (3)
104xx Outline Diagram (Dimensions are in inches and (millimeters).)
1.39
(35)
9.12 (232)
FIBER-OPTIC
RECEIVER
OPTICAL
IN
POWER
ON
RF OUT
OPTICAL
5.06
POWER
(129)
FRONT
PANEL
dc CONNECTOR
9-PIN D-SUB (M)
1-1189 (F)c
Pin Information
Front Panel LEDs
Table 6. Nine-Pin D-sub Connector
■ Power on
■ Optical power received (plug-ins only)
Pin No.
Description
1
2
3
4
5
6
7
8
9
15 Vdc
NC
dc Monitor Voltages
NC
Power Ground
Ref. Ground
■ dc photocurrent (Pin 6): 1 V/mA
Alarm Circuits
Optical Current Monitor
Low Optical Power Alarm1
NC
The alarm is an open collector output capable of sink-
ing 20 mA when active and withstanding 15 V when off.
It can be used for remote drive of relays or LEDs.
NC
1. Open collector outputs.
6
Agere Systems Inc.
Data Sheet
June 2001
Wideband Photodiode Receivers
Ordering Information
Table 7. Wideband Photodiode Receiver Options
Package Type
Option No.
Connector/Pigtail
Module
Flange
Plug-in
-020
-021
-022
-023
-026
-028
-030
-031
-032
FC/APC Bulkhead Optical Connector
FC/SPC Bulkhead Optical Connector1
—
—
—
—
—
—
x
x
x
x
x
FC/APC Optical Connector/3 mm Fiber Cable Pigtail
FC/SPC Optical Connector/3 mm Fiber Cable Pigtail
FC/PC Bulkhead Optical Connector
x
—
—
x
x
x
FC/PC Optical Connector/3 mm Fiber Cable Pigtail
No Optical Connector/900 µm Buffered Fiber Pigtail
FC/PC Optical Connector/900 µm Buffered Fiber Pigtail
FC/APC Optical Connector/900 µm Buffered Fiber Pigtail
x
—
—
—
—
—
—
—
x
x
1. FC/SPC connectors are a higher grade version of FC/PC connectors and are compatible with them.
Table 8. Ordering Information1
Device Code
Description
Package Type
Comcode
2510A
2510B
2515A
2515B
2516A
2516B
2516C
2518A
2518B
4510A
4510B
4515A
4515B
4516A
4516B
4516C
4518A
4518B
10450A
10450B
10455A
10455B
10456A
10456B
10456C
10458A
10458B
Wideband Photodiode Receiver
Module
Module
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
Module
Module
Module
Module
Module
Module
Module
Flange-Mount
Flange-Mount
Flange-Mount
Flange-Mount
Flange-Mount
Flange-Mount
Flange-Mount
Flange-Mount
Flange-Mount
Plug-in, for 19 in. Rack System
Plug-in, for 19 in. Rack System
Plug-in, for 19 in. Rack System
Plug-in, for 19 in. Rack System
Plug-in, for 19 in. Rack System
Plug-in, for 19 in. Rack System
Plug-in, for 19 in. Rack System
Plug-in, for 19 in. Rack System
Plug-in, for 19 in. Rack System
1. For additional ordering information, please contact an account manager at OPTO West, Agere Systems Inc., 1-800-362-3891 (for sales staff,
please press option 2).
7
Agere Systems Inc.
.
For additional information, contact your Agere Systems Account Manager or the following:
INTERNET:
http://www.agere.com
E-MAIL:
docmaster@micro.lucent.com
N. AMERICA: Agere Systems Inc., 555 Union Boulevard, Room 30L-15P-BA, Allentown, PA 18109-3286
1-800-372-2447, FAX 610-712-4106 (In CANADA: 1-800-553-2448, FAX 610-712-4106)
ASIA PACIFIC: Agere Systems Singapore Pte. Ltd., 77 Science Park Drive, #03-18 Cintech III, Singapore 118256
Tel. (65) 778 8833, FAX (65) 777 7495
CHINA:
Agere Systems (Shanghai) Co., Ltd., 33/F Jin Mao Tower, 88 Century Boulevard Pudong, Shanghai 200121 PRC
Tel. (86) 21 50471212, FAX (86) 21 50472266
JAPAN:
Agere Systems Japan Ltd., 7-18, Higashi-Gotanda 2-chome, Shinagawa-ku, Tokyo 141, Japan
Tel. (81) 3 5421 1600, FAX (81) 3 5421 1700
EUROPE:
Data Requests: DATALINE: Tel. (44) 7000 582 368, FAX (44) 1189 328 148
Technical Inquiries: OPTOELECTRONICS MARKETING: (44) 1344 865 900 (Ascot UK)
Agere Systems Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application.
Copyright © 2001 Agere Systems Inc.
All Rights Reserved
June 2001
DS00-305OPTO-1 (Replaces DS00-305OPTO)
相关型号:
©2020 ICPDF网 联系我们和版权申明