28-09600 [ETC]

Used to strap coaxial and telephone cable to strand;


型号：	28-09600
厂家：	ETC
描述：	Used to strap coaxial and telephone cable to strand
文件：	总7页 (文件大小：1549K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

BELDEN

BRAND

Diamond^®Construction Hardware

Lashed Cable Supports

• Used to strap coaxial and telephone cable to strand.

• Available in 430 stainless steel or special zinc alloy in 3/4”width.

• Edges are processed to remove raised and projecting metal. Edges are smooth and

free from burrs.

Part Number

Bundle

Inner Outer

Zinc

Stainless Steel

34-08912

34-08922

34-08932

34-08942

34-08952

34-08956

Length Diameter Circumference Pack

Pack

500

300

200

34-08911

34-08921

34-08931

34-08941

34-08951

10"

16"

22"

28"

34"

45"

50"

66"

1.2"

3.8"

6.3"

9.4"

12.6"

15.7"

20.4"

23.6"

31.4"

6.5"

7.5"

10.0"

34-08961

34-08972

3408972-SP

Installation:

1. Measure diameter or circumference of

bundle. Use table to determine strap

length.

2. Thread strap through spacer slot.

3. Wrap strap around bundle (strand,

spacer, cables) then through buckle

twice, pulling eachwrap tight.

4. Strap end should be doubled under itself

(about 1.5”) before making ﬁnal pass

through buckle. Trim off excess.

5. Bend doubled thickness over top of

buckle to prevent unravelling.

Note:

In cable TV installation, straps should

not be too tight as they may restrict

cable movement during contraction and

expansion and possibly damage cable.

* Ask PPC/Belden Representative.

www.ppc-online.com

Customer Support: 800.800.6652

BELDEN BRAND

Construction

Hardware

Diamond^®Construction Hardware

Lashed Cable Supports

Lashed Cable Support Kit

• Used to strap coaxial or telephone cable to strand.

• Kit contains 100 ft. 430 stainless steel strapping and 75 steel buckles.

• Kit makes 75 straps 16” average length.

• Cut to desired length and secure to buckle.

Inner Outer

Part Number

34-00890

Description

Pack

3/4" Wide Stainless Steel Strap with 75 Buckles

Plastic Cable Spacer

• High density outdoor polyethylene with U.V. inhibitors.

• Bell type.

• Provides separation between aerial cable and messenger.

Inner Outer

Part Number

34-08850

Description

Pack

1,000

1/2" Plastic Spacer

3/4" Plastic Spacer

100

34-08875

100

Support Strap

• Reusable support strap with integral buckle made of malleable aluminum ﬁre retardant.

Used to bundle telephone, coaxial and ﬁber cable at the steel strand.

• Safe to use, no sharp edges to cut hands or cables.

Inner Outer

Part Number

SC05-1

Description

Pack

10" Long, 3/4" Band

16" Long, 3/4" Band

500

SC06-1

500

Customer Support: 800.800.6652

www.ppc-online.com

BELDEN BRAND

BELDEN

BRAND

Diamond^®Construction Hardware

Clamps

Lashing Clamps

• Used to secure lashing wire terminations.

• Mechanically galvanized ASTM B695.

• 1/4” - 7/16” clamp range.

26-09010

Inner Outer

Part Number

SC07-1

Description

Pack

Lashing Clamp

100

26-09010

26-09010NS

26-09020

26-09022

"D" Lashing Clamp

100

"D" Lashing Clamp no stakes

"E" Lashing Clamp

26-09020

"E" Lashing Clamp with 2 Washers, 2 Nuts

Figure 8 Three Bolt Suspension Clamps

• Used to secure Figure 8 cable to pole.

• Center hole accommodates 1/2” or 5/8” diameter machine bolt.

• Clamp plates aluminum alloy.

• Steel bolts mechanically galvanized ASTM B695.

• Eliminates need to strip messenger.

Messenger

Inner Outer

Part Number

28-09610

Description

Size Range

.109" - .134"

.148" - .250"

Pack

Figure 8 Three Bolt Suspension Clamp

28-09615

Figure 8 Tangent Support Clamps

• Used to secure Figure 8 cable to pole.

• Clamp plates and J Hook aluminum alloy.

• Eliminates need to strip messenger.

Thru Bolt

Hole Size

Messenger

Size Range

Inner Outer

Part Number

28-09500

28-09600

28-19651

Description

Pack

Tangent Support Clamp

5/8"

1/2"

5/8"

.148"-.250"

.109"-.134"

www.ppc-online.com

Customer Support: 800.800.6652

BELDEN BRAND

Construction

Hardware

Diamond^®Construction Hardware

Hangers, Brackets, Hooks

Fiber Optic Rack Hanger

• Secures F.O. storage devices (snow shoes) to strand.

• For 1/4” - 7/16” strand.

• Aluminum bracket.

• Steel ASTM B695 clamp plates.

Inner Outer

Part Number

29-19945

Description

Pack

Fiber Optic Rack Hanger

Dead-End Bracket

• Dead-end bracket used to apply tension to steel strand building riser and to provide a

means to dead-end a guy strand.

• Mechanically galvanized ASTM B695.

• 1,000 lb. load capacity.

Inner Outer

Part Number

SC44-1

Description

Pack

5/16" Diameter Hook with 2-3/4" Tension Adjustment

Drive Hooks

• Used to support bail-type drop wire clamps to poles.

• Galvanized to ASTM A153 or B695.

• Fetter drive threads.

Inner Outer

Part Number

40-43007

Description

Pack

7/16" Diameter x 4-3/4" Long

5/16" Diameter x 3-1/2" Long

100

40-43008

200

Square Washer

• Supports bolt head or nut of machine bolt.

• Mechanically galvanized ASTM B695.

Inner Outer

Part Number

28-03004

Description

Pack

5/8" Bolt Size x 2-1/4" Square x 3/16" Thickness

100

Customer Support: 800.800.6652

www.ppc-online.com

BELDEN BRAND

BELDEN

BRAND

Diamond^®Construction Hardware

Tap Brackets

• Used to secure tap to strand.

29-19941

• One piece steel snap-on version mechanically galvanized ASTM B695 for 1/4” strand only.

• Aluminum standard tap bracket & extension bracket. Both have 1/4” to 3/8” strand clamping range.

• Square hole in standard aluminum tap bracket mounts Diamond trap sleeve brackets (“W”brackets).

29-19943

Clearance

Part

Number

Between

Load Capacity (lbs)

Inner Outer

Description

Strand & Tap

(Minimal Deflection) Pack

Pack

29-19941 Steel Snap-on Tap Bracket

29-19943 Aluminum Tap Bracket (Standard)

29-19944 Aluminum Extension Bracket

29-50044 Strand Clamp

2-1/2"

3" to 9"

29-19944

29-50044

Tap Bracket with Common Ground

• Tap bracket used to secure a tap to the steel strand and provide a means to bond up

to eight messengered drop cables.

• Firm and positive grip with no rotation or sliding on steel strand.

• Mechanically galvanized ASTM B695.

Inner Outer

Part Number

SC23CGS-4

Description

Pack

4" Horizontal Mounting with 8 Common Grounds

Tap Bracket - Vertical Mount

• Tap bracket used to secure a tap to the steel strand.

• Firm and positive grip with no rotation or sliding on steel strand.

• Stopper at multi-tap attachment prevents part rotation.

• Mechanically galvanized ASTM B695.

Inner Outer

Part Number

SC23PV-2

Description

Pack

2" Vertical Mount (Figure 8 Application)

SC23PV-4

4" Vertical Mount (Figure 8 Application)

www.ppc-online.com

Customer Support: 800.800.6652

BELDEN BRAND

Construction

Hardware

Diamond^®Construction Hardware

Tap Brackets, Support Brackets

Tap Bracket - Horizontal Mount

• Tap bracket used to secure a tap to the steel strand.

• Firm and positive grip with no rotation or sliding on steel strand.

• Stopper at multi-tap attachment.

• Mechanically galvanized ASTM B695.

Inner Outer

Part Number

SC23PS-2

Description

Pack

2" Horizontal Mount

SC23PS-3

SC23PS-4

SC23PS4-C

3" Horizontal Mount

4" Horizontal Mount

4" Horizontal Mount - Canada

Strand Hanger Support Bracket

• Used in mid-span or next to tap application.

• In high risk theft areas, makes it more difﬁcult to tamper with the traps.

• Support up to 4 trap shields (up to 16 traps).

• Mechanically galvanized ASTM B695.

• Can also be supplied with a coated top shield aluminum bracket.

Inner Outer

Part Number

SC73-1F

Description

Pack

Strand Hanger Support Bracket

Customer Support: 800.800.6652

www.ppc-online.com

BELDEN BRAND

Construction

Hardware

BELDEN

BRAND

Diamond^®Construction Hardware

Aerial Cable Damper

• Aluminum alloy.

• Designed to use the force of wind to aerodynamically reduce oscillation of

cable.

• Supplied with special heavy duty lashed cable supports and “D” lashing

clamps to secure to strand.

• Assembly instructions provided.

Inner

Pack

Outer

Pack

Part Number

28-80001

Description

Aerial Cable Damper

Installation:

1. Select proper size cable guard for application.

2. Place guard on cable over horizontal slots in Aerial

Cable Damper (ACD).

3. Insert lashed cable supports through horizontal slots.

Use two wraps and secure by bending end over top

of buckle. Allow 1/4” clearance between cable and

top of the ACD. The ACD must be allowed to swing

free with the wind.

4. Position lashing clamps inside lashed cable supports

and secure. Lashing clamps will restrict longitudinal

movement to cable area protected by cable guards.

5. Placement – The number of ACDs varies with the

length of cable span and terrain. The following is

recommended as a guide for maximum effectiveness.

Level Ground – Locate at span’s center for 125-170

ft. spans (Fig. 1). On spans 170-300 ft., locate two

ACDs, each one-fourth the total span length from

either pole. (Fig. 2)

Steep Grade – Locate one-tenth total span length

from pole at lower level on 125-170 ft. spans. (Fig 3).

On spans 170-300 ft., two ACDs are required. Locate

one at one-fourth the total span length from lower

pole. Locate second ACD halfway between ﬁrst ACD

and uphill pole. (Fig. 4).

Note: When installing on Fig. 8 cable:

1. ACD should be secured to exposed strand.

2. ACD will have limited dampening effective in

extreme high wind conditions.

www.ppc-online.com

Customer Support: 800.800.6652

BELDEN BRAND

28-09600 [ETC]

相关型号：

28-09610

28-09615

28-09800

28-09850

28-1004818-A1A0

28-1004818-A1E0

28-1004818-A1I0

28-1004818-A1J0

28-1004818-A1K0

28-1004818-A2B0

28-1004818-A2E0

28-1004818-A2F0