3107A0104000 [ETC]
22 AWG stranded (7x30) tinned copper conductors, Datalene insulation;
| 型号： | 3107A0104000 |
| 厂家： | 
ETC |
| 描述： | 22 AWG stranded (7x30) tinned copper conductors, Datalene insulation |
| 文件： | 总3页 (文件大小：104K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION
3107A Multi-Conductor - EIA Industrial RS-485 PLTC/CM
For more Information
please call
1-800-Belden1
General Description:
22 AWG stranded (7x30) tinned copper conductors, Datalene® insulation, twisted pairs, overall Beldfoil®
shield (100% coverage) plus a tinned copper braid (65% coverage), drain wire, UV resistant PVC jacket.
Physical Characteristics (Overall)
Conductor
AWG:
# Pairs AWG Stranding Conductor Material Dia. (in.)
2
22
7x30
TC - Tinned Copper .030
Total Number of Conductors:
4
Insulation
Insulation Material:
Insulation Trade Name Insulation Material
Datalene®
FHDPE - Foam High Density Polyethylene
Outer Shield
Outer Shield Material:
Layer # Outer Shield Trade Name Type Outer Shield Material
Coverage (%)
Tape Aluminum Foil-Polyester Tape 100.000
Braid TC - Tinned Copper 65.000
1
2
Beldfoil®
Outer Shield Drain Wire AWG:
AWG Stranding Drain Wire Conductor Material
22 7x30 TC - Tinned Copper
Outer Jacket
Outer Jacket Material:
Outer Jacket Material Nom. Wall Thickness (in.)
PVC - Polyvinyl Chloride 0.053
Overall Cable
Overall Cabling Color Code Chart:
Number Color
1
2
White/Blue Stripe & Blue/White Stripe
White/Orange Stripe & Orange/White Stripe
Overall Nominal Diameter:
0.350 in.
Mechanical Characteristics (Overall)
Operating Temperature Range:
Non-UL Temperature Rating:
-20°C To +60°C
60°C
Bulk Cable Weight:
73 lbs/1000 ft.
80 lbs.
Max. Recommended Pulling Tension:
Min. Bend Radius/Minor Axis:
3.500 in.
Applicable Specifications and Agency Compliance (Overall)
Applicable Standards & Environmental Programs
NEC/(UL) Specification:
PLTC
Page 1 of 3
01-24-2013
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION
3107A Multi-Conductor - EIA Industrial RS-485 PLTC/CM
CEC/C(UL) Specification:
CM
EU Directive 2011/65/EU (ROHS II):
EU CE Mark:
Yes
Yes
EU Directive 2000/53/EC (ELV):
EU Directive 2002/95/EC (RoHS):
EU RoHS Compliance Date (mm/dd/yyyy):
EU Directive 2002/96/EC (WEEE):
EU Directive 2003/11/EC (BFR):
CA Prop 65 (CJ for Wire & Cable):
MII Order #39 (China RoHS):
Yes
Yes
10/01/2005
Yes
Yes
Yes
Yes
Flame Test
UL Flame Test:
UL1685 UL Loading
FT1
CSA Flame Test:
Suitability
Sunlight Resistance:
Yes
Oil Resistance:
Yes - Oil Res II
Plenum/Non-Plenum
Plenum (Y/N):
No
Surface Printing (Overall)
Electrical Characteristics (Overall)
Nom. Characteristic Impedance:
Impedance (Ohm)
120
Nom. Capacitance Conductor to Conductor:
Capacitance (pF/ft)
11.0
Nom. Capacitance Cond. to Other Conductor & Shield:
Capacitance (pF/ft)
20.9
Nominal Velocity of Propagation:
VP (%)
78
Nom. Conductor DC Resistance:
DCR @ 20°C (Ohm/1000 ft)
14.7
Nominal Outer Shield DC Resistance:
DCR @ 20°C (Ohm/1000 ft)
1.8
Nom. Attenuation:
Description Freq. (MHz) Start Freq. (MHz) Stop Freq. (MHz) Attenuation (dB/100 ft.)
1
.5
Max. Operating Voltage - UL:
Voltage
300 V RMS
Max. Recommended Current:
Current
2.7 Amps per conductor @ 25°C
Page 2 of 3
01-24-2013
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION
3107A Multi-Conductor - EIA Industrial RS-485 PLTC/CM
Other Electrical Characteristic 1:
Input Impedance/Unfitted Impedance .5 - 10 MHZ, 120 +-12 Ohms
Notes (Overall)
Notes: Oil Resistance: Passes Oil Res II Per UL1277, Table 10.17. For CPE jacketed version order YR46792.
Put Ups and Colors:
Item #
Putup
Ship Weight
62.000 LB
Color
Notes
C
Item Desc
3107A 0101000
3107A 0104000
3107A 0105000
1,000 FT
4,000 FT
5,000 FT
BLACK
BLACK
BLACK
2 PR #22 FHDPE SH PVC
2 PR #22 FHDPE SH PVC
2 PR #22 FHDPE SH PVC
256.000 LB
330.000 LB
C
C N
Notes:
C = CRATE REEL PUT-UP.
N = FINAL PUT-UP LENGTH MAY VARY -0% TO +10% FROM LENGTH SHOWN.
Test Reports
a) UL
i) UL Test Reports are available on-line through the UL Client Document Access web portal.
ii) UL Inspection Reports are also available through the UL Client Document Access web portal.
b) CSA
i) CSA "Descriptive Report and Test Results" documents are available on the CSA Gateway Portal.
ii) CSA Inspection Reports are maintained on the CSA issued 'flash drive' at each manufacturing location.
* other test data may be available if requested at time of order.
Revision Number: 1
Revision Date: 08-17-2012
© 2013 Belden, Inc
All Rights Reserved.
Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications
described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not
ensure product availability.
Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express,
statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or
exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract,
negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.
All sales of Belden products are subject to Belden's standard terms and conditions of sale.
Belden believes this product to be in compliance with EU RoHS (Directive 2002/95/EC, 27-Jan-2003). Material manufactured prior to the
compliance date may be in stock at Belden facilities and in our Distributor’s inventory. The information provided in this Product Disclosure, and
the identification of materials listed as reportable or restricted within the Product Disclosure, is correct to the best of Belden’s knowledge,
information, and belief at the date of its publication. The information provided in this Product Disclosure is designed only as a general guide
for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not
to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for
determining the applicability of legislation and regulations based on their individual usage of the product.
Belden declares this product to be in compliance with EU LVD (Low Voltage Directive 73/23/EEC), as amended by directive 93/68/EEC.
Page 3 of 3
01-24-2013
相关型号：
©2020 ICPDF网 联系我们和版权申明