40-20000 [ETC]
Diamond Bonding and Grounding Hardware;
| 型号： | 40-20000 |
| 厂家： | 
ETC |
| 描述： | Diamond Bonding and Grounding Hardware |
| 文件： | 总9页 (文件大小：1564K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Bonding &
Grounding
Hardware
Diamond® Bonding and Grounding Hardware
Bonding Clamps
Bonding Connector for Meter Pan (CATV Applications)
• Meter pan connector designed to provide a bonding connection between the
metallic frame of a meter pan and a copper ground wire.
• Its unique design allows a fixed and positive mechanical contact without
interfering with the opening of the meter pan front cover.
• Tighten screws to 20 in. lbs. torque.
Inner
Pack
Outer
Pack
Part Number
SC51-1
Description
For #10/12/14 AWG Copper Ground Wire.
Made of G90 Galvanize Steel + Trivalent
Chromate
--
100
Installation:
1. The tip of the stainless steel mounting screw
is shaped to remove the paint at the point of
contact, thus ensuring positive metal-to-metal
contact with the top of the meter panel. (Always
ensure that the bonding surface is cleaned of
excess paint or rust before mounting the SC51-
1 connector.) For heavily corrosive or marine
environments. use of “RTV” silicone sealer is
recommended at the contact point, between the
screw tip and the top of the meter pan.
2. Back the bolt and nut from the connector enough
to allow it to mount on one of the corner folds of
the metal meter pan back corners.
3. Install the connector with the bottom edges
gripping on the bottom fold of the fixed top
cover of the metal meter pan. Under no
circumstances is the bonding connector to be
mounted on the front cover or any movable
part of the metal meter pan. Tighten the bolt
securely by applying sufficient torque (20 inch
pound) to ensure a firm and positive connection
on the metal meter pan.
4. Remove one inch of insulation from copper
ground wire, use caution to avoid scoring or
damaging ground wire. Insert grounding wire
between washer and grounding nut. Wrap ground
wire clockwise between washer and ground nut.
Insure that slot in grounding washer is aligned
with ground wire. Tighten grounding nut with
CNW6 tool to secure ground wire. Do not over
tighten. Double check that the grounding bolt is
still firmly tight on the metal meter pan enclosure.
If not, tighten it one quarter turn.
Recommended for usage when no other
approved grounding electrode is accessible.
Customer Support: 800.800.6652
www.ppc-online.com
29
A
BELDEN BRAND
BELDEN
Diamond® Bonding and Grounding Hardware
Bonding Clamps
Bonding Connector for Meter Pan (CATV Applications)
• Meter pan connector designed to provide a bonding connection between the metallic
frame of a meter pan and a copper ground wire.
• Its unique design allows a fixed and positive mechanical contact without
interfering with the opening of the meter pan front cover.
SC51-CF
• Tighten screws to 20 in. lbs. torque.
Inner Outer
Pack Pack
Part Number Description
Meter Pan Connector. For #10/12/14AWG Copper Ground Wire. Made
of Stainless Steel.
SC51-CF
--
--
--
100
100
100
Meter Pan Ground Block for Coaxial Cable with F81 connector. For
SC51CF-81
#10/12/14AWG Copper Ground Wire. Made of Stainless Steel
Meter Pan Ground Block for Coaxial Cable with F81 connector. For
SC51CFKF81
SC51CFKF81
#10/12/14AWG Copper Ground Wire. Made of Stainless Steel
Bonding Connector for Meter Pan (Telephone Applications)
SC51-2
Inner Outer
Pack Pack
Part Number Description
Meter Pan Corner Bonding Connector for #14 to #10 AWG Copper
Ground Wire. Connector made of G90 Galvanize Steel + Trivalent
Chromate.
SC51-1T
SC51-2
--
--
--
100
100
100
SC51CF-85
Meter Pan Corner Bonding Connector for #6AWG Copper Ground Wire.
Made of G90 Galvanize Steel + Trivalent Chromate
Meter Pan Bonding Connector for #6AWG Copper Ground Wire. Made of
Stainless Steel
SC51CF-85
Meter Box Ground Clamp
• Provides a convenient, quick installation of a reliable ground or bond for drops.
• 2 adjustable sizes: 6-1/2” to 10-1/2”, 11-1/2” to 15-1/2”.
• Stainless steel bolts, screw and washer.
• Mechanically galvanized ASTM B695.
• UL Listed.
• Will not restrict cover operation.
• Tighten screws to 20 in. lbs. torque.
Clamp
Range
Inner Outer
Part Number
Description
Pack
Pack
40-20000
40-20001
40-20002
Meter Box Ground Clamp (S), #12-16 AWG
Meter Box Ground Clamp (L), #12-16 AWG
Meter Box Ground Clamp (S), #14-6 AWG
6.5"-10.5"
11.5"-15.5"
6.5"-10.5"
--
--
1*
50
50
5
40-20003
40-20004
Meter Box Ground Clamp (S), #14-6 AWG
Meter Box Ground Clamp (S), #14-6 AWG
11.5"-15.5"
15.5"-21.5"
1*
1*
5
5
IBT1
IBT2
Meter Box Ground Clamp (S), #14-6 AWG
Meter Box Ground Clamp (S), #14-6 AWG
6.5"-10.5"
1*
1*
5
5
15.5"-21.5"
* Packages of 10 pieces each package.
www.ppc-online.com
Customer Support: 800.800.6652
30
A
BELDEN BRAND
Bonding &
Grounding
Hardware
Diamond® Bonding and Grounding Hardware
Ground Blocks
Grounding Blocks
Inner Outer
Pack Pack
Part Number
GBS81K
Description
GBS81K
Single Ground Block - Outdoor Precision F81
#14 AWG through #6 AWG Copper Ground Wire
--
--
500
150
Single Ground Block with One Precision TBCF81 Connector - 3GHz #14
to #10 AWG Copper Grounding Wire. Made of G90 Galvanize Steel +
Trivalent Ch romate
SC12N-81
Single Ground Block with One Precision F81 Connector - 1GHz #14
to #10 AWG Copper Grounding Wire. Made of G90 Galvanize Steel +
Trivalent Chromate
SC12N81-1G
--
150
SC12KF81-1
Single Ground Block with One Precision KF81-1 Connector - 3GHz #14
to #10 AWG Copper Grounding Wire. Made of G90 Galvanize Steel +
Trivalent Chromate
Single Stainless Steel Ground Block with One Precision F81 Connector
- 2GHz #14 to #10 AWG Copper Grounding Wire.
Dual Ground Block with One Precision TBCF81
Connector - 3GHz #14 to #10 AWG Copper Grounding Wire. Made of
G90 Galvanize Steel + Trivalent Chromate
SC12KF81-1
SC12-SS
--
--
--
150
150
100
SC12N-81
SC12DNS-81
Dual Ground Block with One Precision TBCF81 Connector - 3GHz. #14
to #10 AWG Copper Grounding Wire. Made of G90 Galvanize Steel +
Trivalent Chromate
Dual Ground Block with Two Precision TBCF81
Connectors - 3GHz #14 to #10 AWG Copper Grounding Wire. Made of
G90 Galvanize Steel + Trivalent Chromate
SC12DNS81-25
SC12DN-81
--
100
100
--
--
SC12DNS-81
Dual Stainless Steel Ground Block with Two Precision
F81 Connectors - 2GHz #14 to #10 AWG Copper Grounding Wire.
SC12D2-SS
SC12D-SS
100
100
Dual Stainless Steel Ground Block with One Precision F81
Connector. 2GHz. Made for #14 to #10AWG Copper Ground Wire
Grounding Bracket
• Grounding bracket permits upgrading number of drops by mounting 2, 3 or 4 way
splitters simply by using the SC09 splitter ring nut for mounting.
• Made of G90 Galvanize Steel + Trivalent Chromate..
Inner Outer
Part Number
SC46DN
Description
Pack
Pack
Accepts connector for #14 to #10 AWG Copper Grounding
Wire
--
100
Splitter Ring Nut
• Splitter ring nut especially designed for converting the SC12DN grounding blocks to
accept splitters.
Inner Outer
Part Number
SC09-1
Description
Pack
Pack
Brass, Nickel Plated, .172" Height
250
5,000
Cusp0.8065
www.ppc-online.com
31
A
BELDEN BRAND
BELDEN
Diamond® Bonding and Grounding Hardware
Grounding Clamps
Span Clamp
• Span clamp for steel messengered drop cable bonding applications.
• Unique locking design prevents rotation on steel strand.
• Mechanically galvanized ASTM B695.
Inner
Outer
Pack
Part Number
SC03E-2G
Description
Pack
For Two Steel Messenger Wires .051"
to .072" Diameter Used on 1/4" (6.6m)
Steel Strand
--
75
"I" Beam Grounding Clamp
• Grounding clamp used to bond a solid copper ground wire to steel structure.
• Mechanically galvanized ASTM B695.
Inner
Pack
Outer
Pack
Part Number
SC07GG
Description
I Beam Grounding Clamp for #14 to
#10AWG Copper Ground Wire
--
125
"B" Ground Wire Clamp
• Used to secure #6 AWG to #12 AWG ground wire runs.
• Mechanically galvanized ASTM B695.
• 7/32” hole diameter.
• 3/8” wide x 9/16” long.
Ground Wire
Inner
Pack
Outer
Pack
Part Number Description
23-80002 "B" Ground Wire Clamp
Range
#12 (.081") to
#6 (.162") AWG
500
5,000
Ground Connector
• Ground connector used to connect various size copper ground conductors
with a firm mechanical contact.
• Made of pure copper with brass fastener.
Inner
Pack
Outer
Pack
Part Number
SC42-1
Description
Connects #4 or #6AWG to #10, #12 or
#14AWG Copper Ground Wire
150
1,800
www.ppc-online.com
Customer Support: 800.800.6652
32
A
BELDEN BRAND
Bonding &
Grounding
Hardware
Diamond® Bonding and Grounding Hardware
Grounding Straps
Copper Ground Strap
• Ground strap used to provide a fixed and permanent connection between a copper
water pipe to a copper ground wire.
• Made of pure copper (ASTM B152-110) and brass fasteners
(ASTM B16-360 and B134-260.
• All longitudinal dimensions are based on disassembled pieces.
Inner Outer
Part Number
SC13B-1
Description
Pack
Pack
6.5" Strap, Fits 1/2" to 1" Diameter Pipe to #10/12/14
AWG Copper Ground Wire
--
150
9" Strap, Fits 1/2" to 2-1/4" Diameter Pipe to #10/12/14
AWG Copper Ground Wire
SC13B-2
SC13B-3
--
--
200
150
12" Strap, Fits 1/2" to 3" Diameter Pipe to #10/12/14
AWG Copper Ground Wire
Galvanized Ground Strap
• Ground strap used to provide a fixed and permanent connection between a galvanized
steel pipe and a copper ground wire.
• Made of G90 galvanized steel that meets Salt Test ASTM B117.
Fasteners are made of brass, nickel plated (ASTM B16-360 and
B134-260) to create a neutral for galvanized to copper connection.
• All longitudinal dimensions are based on disassembled pieces.
Inner Outer
Part Number
SC13BZ-1
Description
Pack
Pack
6.5" Strap, Fits 1/2" to 1" Diameter Pipe to #10/12/14
AWG Copper Ground Wire
--
150
9" Strap, Fits 1/2" to 2-1/4" Diameter Pipe to #10/12/14
AWG Copper Ground Wire
SC13BZ-2
SC13BZ-3
SC13BZ-4
--
--
--
200
150
100
12" Strap, Fits 1/2" to 3" Diameter Pipe to #10/12/14
AWG Copper Ground Wire
23-3/4" strap. Fits 1/2" to 6" Diameter Pipe for #10/12/14
AWG Copper Ground Wire
Customer Support: 800.800.6652
www.ppc-online.com
33
A
BELDEN BRAND
BELDEN
Diamond® Bonding and Grounding Hardware
Mechanical - Split Bolt Connectors, Jumper Clamps
High Strength Split Bolt Connectors
• For copper to copper connections.
• High strength corrosion resistant copper alloy for use in bonding applications.
• Highly resistant to corrosion and seasonal cracking.
• Hex design nut of high strength corrosion-resistant bronze alloy.
• Pressure bar is copper.
• UL and CSA listed.
Dimensions (In)
Inner
Pack
Outer
Pack
Part Number
DG2
Size
A
B
C
D
#2
0.309 0.615 0.875 1.240
0.209 0.453 0.688 0.984
0.165 0.413 0.625 0.906
0.146 0.413 0.562 0.854
100
100
100
100
400
800
800
800
DG4
DG6
DG8
#4
#6
#8
Type K - Jumper Clamp
• For all combinations of aluminum, copper and steel conductors.
• Cast of high strength bronze alloy CDA836.
• Furnished with silicon bronze bolt and lockwasher. Lockwasher minimizes loosening
of installed clamp.
• Parallel groove design; no need to remove bolt for installation.
• Only one size for all requirements from No. 8 solid copper
to 1/0 ACSR or 2/0 copper.
Inner Outer
K1DS
Part Number Description
Bonds 1/4" and 5/16" Strand to #6 AWG Copper Ground Wire,
Pack
Pack
K1DS
Tin Plated Clamp (except for 1 wire groove) with Galvanized
Steel Bolt
100
600
Bonds 1/4" and 5/16" Strand to #6 AWG Copper Ground Wire,
Tin Plated Clamp with Galvanized Steel Bolt
K2DS
K3DS
KULDS
100
100
100
600
600
600
Bonds 1/4" and 5/16" Strand to #6 AWG Copper Ground Wire,
Non-Plated Clamp with Galvanized Steel Bolt
Bonds 1/4" and 5/16" Strand to #6 AWG Copper Ground Wire,
Tin Plated Clamp with Bronze Bolt
KULDS
www.ppc-online.com
Customer Support: 800.800.6652
34
A
BELDEN BRAND
Bonding &
Grounding
Hardware
Diamond® Bonding and Grounding Hardware
Mechanical - Ground Rod Clamps
Type JAB Ground Rod Clamps
• Cast of high strength corrosion resistant
copper alloy CDA955.
• Hex head.
• Long bearing surface of clamp on ground
wire secures ground connection.
• U.L. Listed for direct burial.
JAB58HDS
JAB34HDS
JAB12HDS
Nominal Rod
Diameter
Wire Range
Dimensions (IN)
A
A
(Max)
Socket
(Max) Screw
Max
Min
Hex
Bolt
Thread
Size
Package
Quantity
Part Number
JAB12H-DS
IN
MM
Max
Min
(MM2) (MM2) Screw
B
C
D
7/16"-
14UNC
1/2
3/4
5/8
12.7
2 Str.
10 Sol.
33.6
53.4
53.4
5.2
8.3
8.3
1-19/32 2-3/32
2-11/32
1-27/32 2-13/64
15/16" 63/64" 11/16"
100
50
7/16"-
14UNC
JAB34H-DS
JAB58H-DS
19.0
15.8
1/0 Str. 8 Sol.
1/0 Str. 8 Sol.
2
11/16"
51/64"
1"
51/64"
19/32"
7/16"-
14UNC
7/8"
50
Type G Ground Rod Clamps
• A dependable ground connection offered at a
substantial savings.
• Cast of high strength corrosion-resistant
copper alloy CDA955.
• Hex head bolts.
• Simplified compact design will make a lasting,
trouble-free connection.
G5DS
G4DS
• U.L. Listed for direct burial.
G3DS
Nominal Rod
Diameter
Wire Range
Dimensions (IN)
A
Screw
Max
Min
(Max) Thread
Package
Quantity
Part Number
G3-DS
IN
MM
Max
Min
(MM2) (MM2)
Bolt
Size
B
C
D
E
5/16"-
18UNC
3/8"-
16UNC
3/8"-
16UNC
3/8
9.5
4 Str. 10 Sol.
2 Str. 10 Sol.
2 Str. 10 Sol.
21.6
33.6
33.6
5.2
5.2
5.2
--
11/16"
1/2"
27/64"
3/8"
100
100
50
G4-DS
G5-DS
1/2
5/8
12.7
15.8
--
--
49/64" 21/32" 33/64"
29/32" 19/32" 21/32"
1/2"
1/2"
Customer Support: 800.800.6652
www.ppc-online.com
35
A
BELDEN BRAND
BELDEN
Diamond® Bonding and Grounding Hardware
Mechanical - Grounding Connectors and Clamps
Die Cast Zinc Water Pipe Clamp
• Budget price clamps.
• Made of die cast zinc alloy with zinc plated screws.
Conductor Range
Package
Quantity
Part Number
BJ1DS
Water Pipe Size
Maximum
#2 Stranded
Minimum
1/2"-1"
#10 Solid
250
Cast Bronze Water Pipe Clamp
• For connecting grounding conductor to water pipe or copper tube.
• Cast of high strength, highly conductive copper alloy.
• Zinc plated crews plated for corrosion resistance.
• UL listed.
Water
Pipe
Size
Conductor Range
Dimensions (IN)
B C
Part
Number
Package
Quantity
Maximum
Minimum
A
JDS
1/2"-1" #2 Stranded
#10 Solid
2-3/4 2-11/32 23/32
100
www.ppc-online.com
Customer Support: 800.800.6652
36
A
BELDEN BRAND
Bonding &
Grounding
Hardware
Diamond® Bonding and Grounding Hardware
Mechanical - Grounding Connectors and Clamps
Trailer Ground Clamp
• 7/16” tin plated hex head bolt installs with terminal wrench or crescent wrench.
Square head bolt allows clamp to be installed with pliers.
• Ground wire hole access from four directions minimizes having to bend ground wire.
• Designed so ground wire may be installed on clamp prior to mounting the clamp on
metal frame, reducing installation time.
• Beam and ground wire connection can be separately tightened without disconnect
integrity of ground circuit.
• High strength copper alloy CDA956 (91% nominal) providing greater conductivity,
durability and excellent corrosion resistant characteristics without reliance on plating.
• High strength anchoring bolt penetrates paint.
• Bolts are electro-galvanized. Blade-type ground wire screw
is tin-plated.
Unit
Standard
Package
Part Number
TGCDS
Bolt Type
Quantity
Square Head - 15/16" - 18UNC Bolt
Slotted Screw Head - 5/16" - 24UNF
25
25
100
25
TGCHDS
Customer Support: 800.800.6652
www.ppc-online.com
37
A
BELDEN BRAND
相关型号：
©2020 ICPDF网 联系我们和版权申明