4DBEZEL-32-W [ETC]
For the uLCD-32PTU Display Module;
| 型号： | 4DBEZEL-32-W |
| 厂家： | 
ETC |
| 描述： | For the uLCD-32PTU Display Module CD |
| 文件： | 总6页 (文件大小：767K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3.2” Display Bezel
4DBEZEL-32(W/B)
For the uLCD-32PTU Display Module
Document Date: 15th January 2014
Document Revision: 1.2
Uncontrolled Copy when printed or downloaded.
Please refer to the 4D Systems website for the latest Revision of this document
Contents
1. Description............................................................................................................................. 3
2. Features ................................................................................................................................. 3
3. Assembly of the uLCD-32PTU onto the Bezel and on to the Panel............................................. 4
4. Mechanical Dimensions .......................................................................................................... 5
5. Legal Notice............................................................................................................................ 6
6. Contact Information ............................................................................................................... 6
4D SYSTEMS
3.2” Bezel for the uLCD-32PTU
1. Description
2. Features
The 4D Systems 3.2” Display Bezel is a plastic bezel
for the uLCD-32PTU display module.
Plastic 3.2” Bezel designed for panel mounting
the uLCD-32PTU
Simple cut-out required, no mounting holes
requires to be drilled in the panel
Brass mounting inserts in the rear of the bezel
4x Spring Clips for attaching the bezel to the
panel
This bezel provides a sleek cover to the uLCD-32PTU
display module, and also providing an easy method
to panel mount the display module into an
enclosure. The bezel mounts the display module,
while also providing a mounting solution into a
panel, keeping all securely together.
8x M2 mounting screws and washers included
Spring clips attach to the bezel in four locations, and
hold it tightly to the enclosure/wall panel, offering
a range of panel thickness from 1mm to 2.5mm
without the need to add washers. If a panel thicker
than 2.5mm is required, washers can be placed
under the spring clip, however this is not
recommended practice.
Please Note, this bezel is only designed for indoor
use. It is not weather tight, nor does it offer any IP
rating. It should only be used indoors in clean
environments as it offers little protection to the
circuitry of moisture or particles.
uLCD-32PTU Mounted in 3.2” Bezel - Back
Bezels are available in Black or White.
uLCD-32PTU Mounted in 3.2” Bezel - Front
Bare 3.2” Bezel - Front
Spring Clips
Bare 3.2” Bezel - Back
© 2014 4D SYSTEMS
Page 3 of 6
www.4dsystems.com.au
4D SYSTEMS
3.2” Bezel for the uLCD-32PTU
3. Assembly of the uLCD-32PTU onto the Bezel and on to the Panel
1) Place the uLCD-32PTU face down into the bezel, taking care of the orientation of the display so the
active area of the display is visible through the viewing hole on the front of the bezel.
2) Insert 4 of the screws with 4 of the washers into the mounting tabs to secure the display on the bezel.
Nip the screws up but take care not to over tighten or damage may be done to the bezel.
3) Place the assembled bezel into the Panel/Enclosure, taking note of the orientation of the display.
4) Place a washer on one of the remaining screws, followed by a spring clip, and attach to one of the
brass inserted holes on the bezel, allowing the spring clip to work against the panel, holding the bezel
firmly in place.
5) Repeat for the remaining screws.
6) The bezel should now be securely fitted to the panel, and the uLCD-32PTU should be securely fitted to
the bezel.
uLCD-32PTU secured to the 3.2” Bezel, and Bezel secured to the Panel/Enclosure using the four spring clips
© 2014 4D SYSTEMS
Page 4 of 6
www.4dsystems.com.au
4D SYSTEMS
3.2” Bezel for the uLCD-32PTU
4. Mechanical Dimensions
© 2014 4D SYSTEMS
Page 5 of 6
www.4dsystems.com.au
4D SYSTEMS
3.2” Bezel for the uLCD-32PTU
ORDERING INFORMATION
Order Code:
4DBEZEL-32-W (White Version)
4DBEZEL-32-B (Black Version)
Packaging: Module sealed in antistatic foam padded 4D Systems Box
5. Legal Notice
Proprietary Information
The information contained in this document is the property of 4D Systems Pty. Ltd. and may be the subject of
patents pending or granted, and must not be copied or disclosed without prior written permission.
4D Systems endeavours to ensure that the information in this document is correct and fairly stated but does not
accept liability for any error or omission. The development of 4D Systems products and services is continuous
and published information may not be up to date. It is important to check the current position with 4D Systems.
4D Systems reserves the right to modify, update or makes changes to Specifications or written material without
prior notice at any time.
All trademarks belong to their respective owners and are recognised and acknowledged.
Disclaimer of Warranties & Limitation of Liability
4D Systems makes no warranty, either expressed or implied with respect to any product, and specifically
disclaims all other warranties, including, without limitation, warranties for merchantability, non-infringement
and fitness for any particular purpose.
Information contained in this publication regarding device applications and the like is provided only for your
convenience and may be superseded by updates. It is your responsibility to ensure that your application meets
with your specifications.
Images and graphics used throughout this document are for illustrative purposes only. All images and graphics
used are possible to be displayed on the 4D Systems range of products, however the quality may vary.
In no event shall 4D Systems be liable to the buyer or to any third party for any indirect, incidental, special,
consequential, punitive or exemplary damages (including without limitation lost profits, lost savings, or loss of
business opportunity) arising out of or relating to any product or service provided or to be provided by 4D
Systems, or the use or inability to use the same, even if 4D Systems has been advised of the possibility of such
damages.
4D Systems products are not fault tolerant nor designed, manufactured or intended for use or resale as on line
control equipment in hazardous environments requiring fail – safe performance, such as in the operation of
nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines
or weapons systems in which the failure of the product could lead directly to death, personal injury or severe
physical or environmental damage (‘High Risk Activities’). 4D Systems and its suppliers specifically disclaim
any expressed or implied warranty of fitness for High Risk Activities.
Use of 4D Systems’ products and devices in 'High Risk Activities' and in any other application is entirely at the
buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless 4D Systems from any and all damages,
claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any
4D Systems intellectual property rights.
6. Contact Information
For Technical Support: support@4dsystems.com.au
For Sales Support: sales@4dsystems.com.au
Website: www.4dsystems.com.au
Copyright 4D Systems Pty. Ltd. 2000-2014.
© 2014 4D SYSTEMS
Page 6 of 6
www.4dsystems.com.au
相关型号：
©2020 ICPDF网 联系我们和版权申明