5-1437366-1 [ETC]
KABEL FLACHB RAST 1.27MM 50ADR 30.5M ; KABEL FLACHB RAST 1.27MM 50ADR 30.5M\n
| 型号： | 5-1437366-1 |
| 厂家： | 
ETC |
| 描述： | KABEL FLACHB RAST 1.27MM 50ADR 30.5M
|
| 文件： | 总29页 (文件大小：712K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
IDC Systems
Cable
P
RODUCT
D
ESCRIPTION
FLAT AND ROUND CABLE
Thomas & Betts flat cable provides the
means to reduce mass and weight in
flexible wiring assemblies. Available
with PVC, TPE or FEP insulation, the
cable is extruded to provide precise
and uniform alignment of the
conductor spacing.
DESIGN
ADVANTAGES
• Extruded PVC, TPE or FEP
insulation for precise conductor
spacing.
• Polarizing stripe allows easy
identification of number one circuit
even in twisted or irregularly curved
applications.
• Thomas & Betts cable cutters and
IDC
termination
tooling
are
matched to the cable tolerances to
provide uniform results and trouble-
free, high performance fine pitch
cable assemblies.
• Available in standard .025", .050",
and spread pitch configurations.
• Available in various gauge wire.
• Available in ground plane, high flex,
color-coded, round to flat, twisted
pair, and jacketed configurations.
Fine Pitch (.025")
Flat Cable:
Standard Pitch (.050")
Flat Cable:
136
137
131
132
134
138
139
140
141
188
PVC, 30 AWG, Solid
PVC, 30 AWG, Stranded
102
103
104
105
106
107
108
109
110
111
112
171
173
PVC, 28 AWG, Stranded
116
117
118
119
120
121
122
123
124
125
126
PVC, 28 AWG, Solid
PVC, 26 AWG, Stranded
TPE, 28 AWG, Stranded
TPE, 30 AWG, Solid
179
TPE, 30 AWG, Stranded
177
TPO, 30 AWG, Solid Fast SCSI
TPO, 31 AWG, Solid Fast SCSI
TPO, 30 AWG, Stranded Fast SCSI
FEP, 32 AWG, Stranded
199
Halogen Free, 28 AWG (7/36) Stranded
High Flex, PVC , Stranded
PVC Jacketed, 28 AWG
185
174
187
PVC Jacketed/Shielded
FEP, 32 AWG, Solid
196
Ground Plane, 28 AWG
PVC Jacketed/Shielded, 30 AWG
PVC Ground Plane, 30 AWG
200
PVC Twisted Pair, Flat
198
200/201
PVC Color Coded (28/26 AWG)
Round Cable:
Round Cable:
302
PVC Shielded—Round
113
300/301
28 AWG, Shielded/Non-shielded
Round to Flat, 28 AWG
127
128
Prepared Cable:
Prepared Cable:
136-xxx-0100
Transition Cable, Single End
Transition Cable, Double End
114
115
203/204
136-xxx-0100D
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
101
IDC Systems
Flat Ribbon Cables
.025" PITCH FLAT CABLE
136 SERIES
(30 AWG SOLID PVC)
LL53375
HYSICAL
E41651
P
I
P
ROPERTIES
NSULATION MATERIAL: Flexible PVC
C
C
OLOR: Blue/Grey
ONDUCTORS: 30 AWG, solid bare copper
E
LECTRICAL PROPERTIES
V
OLTAGE RATING: 150V rms
10
I
I
NSULATION RESISTANCE: >10 Ohms
MPEDANCE: 80 Ohms
C
APACITANCE @ 1 MH
Z
: 62.3 pF/m (19.0 pF/ft.)
: .49 µH/m (.15 µH/ft.)
ROPOGATION DELAY: 5.25 nSec/m (1.60 nSec/ft.)
I
NDUCTANCE @ 1 MH
Z
P
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE RATING: –20˚ C to 105˚ C
A
PPLICATION
UTTER: 779-5030M
ACKAGING
TANDARD: Splice free 100 foot rolls with UL/CSA
TOOLING
C
ABLE C
P
S
markings on reels.
O
PTIONAL: Other roll quantities and labeling
options available. See page 129 for details.
UL Style No. 2678
UL94VW-1 COMPLIANT
Ordering Information
NUMBER OF
CONDUCTORS
CATALOG
NUMBER
DIMENSIONS
A
B
20
26
136-020
136-026
136-030
136-034
136-040
136-050
136-060
136-068
136-080
136-100
136-120
12.70 (.500)
16.51 (.650)
19.05 (.750)
21.59 (.850)
25.40 (1.000)
12.07 (.475)
15.88 (.625)
18.42 (.725)
20.96 (.825)
24.77 (.975)
30
34
40
50
31.75 (1.250) 31.12 (1.225)
38.10 (1.500) 37.47 (1.475)
43.18 (1.700) 42.55 (1.675)
50.80 (2.000) 50.17 (1.975)
63.50 (2.500) 62.87 (2.475)
76.20 (3.000) 75.57 (2.975)
60
68
80
100
120
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
102
IDC Systems
Flat Ribbon Cables
.025" PITCH FLAT CABLE
137 SERIES
(30 AWG STRANDED PVC)
LL53375
E41651
P
HYSICAL ROPERTIES
P
I
NSULATION MATERIAL: Flexible PVC
C
C
OLOR: Blue/Grey
ONDUCTORS: 30 AWG, 7/38 tinned, stranded copper
E
LECTRICAL PROPERTIES
V
OLTAGE RATING: 150V rms
10
I
I
NSULATION RESISTANCE: >10 Ohms
MPEDANCE: 70 Ohms
C
APACITANCE @ 1 MH
Z
: 82.0 pF/m (25.0 pF/ft.)
: .46 µH/m (.14 µH/ft.)
ROPOGATION DELAY: 5.08 nSec/m (1.55 nSec/ft.)
I
NDUCTANCE @ 1 MH
Z
P
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE RATING: –20˚ C to 105˚ C
A
PPLICATION
UTTER: 779-5030M
ACKAGING
TANDARD: Splice free 100 foot rolls with UL/CSA
TOOLING
C
ABLE C
P
S
markings on reels.
O
PTIONAL: Other roll quantities and labeling options
available. See page 129 for details.
UL Style No. 2678
UL94VW-1 COMPLIANT
Ordering Information
NUMBER OF
CONDUCTORS
CATALOG
NUMBER
DIMENSIONS
A
B
20
26
137-020
137-026
137-030
137-034
137-040
137-050
137-060
137-068
137-080
137-100
137-120
12.70 (.500)
16.51 (.650)
19.05 (.750)
21.59 (.850)
25.40 (1.000)
12.07 (.475)
15.88 (.625)
18.42 (.725)
20.96 (.825)
24.77 (.975)
30
34
40
50
31.75 (1.250) 31.12 (1.225)
38.10 (1.500) 37.47 (1.475)
43.18 (1.700) 42.55 (1.675)
50.80 (2.000) 50.17 (1.975)
63.50 (2.500) 62.87 (2.475)
60
68
80
100
120
76.2 (3.000)
75.57 (2.975)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
103
IDC Systems
Flat Ribbon Cables
.025" PITCH FLAT CABLE
131 SERIES
(30 AWG SOLID (TPE)
LL53375
HYSICAL
E41651
P
I
P
ROPERTIES
NSULATION MATERIAL: Thermoplastic Elastomer (TPE)
C
C
OLOR: White
ONDUCTORS: 30 AWG Solid
E
LECTRICAL PROPERTIES
V
OLTAGE RATING: 150V rms
10
I
I
NSULATION RESISTANCE: >5X10 Ohms/FT
MPEDANCE: 88 Ohms
C
APACITANCE @ 1 MH
Z
: 71.8 pF/m (16.5 pF/ft.)
I
NDUCTANCE @ 1 MH
Z: .502 µH/m (.153 µH/ft.)
P
R
N
ROPOGATION DELAY: 4.97 ns/m (1.410 ns/ft.)
ISE TIME: 5
EAR END %: 1.9
FAR END %: 3.1
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE: -20˚ C to +105˚ C
(-4˚ F to +221˚ F)
A
PPLICATION
UTTER: 779-5030M
ACKAGING
TANDARD: Splice free 100 foot rolls with UL/CSA
TOOLING
C
ABLE C
P
S
markings on reels.
O
PTIONAL: Other roll quantities and labeling options
available. See page 129 for details.
UL Style No. 20650
UL94VW-1 COMPLIANT
Ordering Information
NUMBER OF
CONDUCTORS
CATALOG
NUMBER
DIMENSIONS
A
B
20
26
131-020
131-026
131-030
131-034
131-040
131-050
131-060
131-068
131-080
131-100
131-120
12.70 (.500)
16.51 (.650)
19.05 (.750)
21.59 (.850)
25.40 (1.000)
12.07 (.475)
15.88 (.625)
18.42 (.725)
20.96 (.825)
24.77 (.975)
30
34
40
50
31.75 (1.250) 31.12 (1.225)
38.10 (1.500) 37.47 (1.475)
43.18 (1.700) 42.55 (1.675)
50.80 (2.000) 50.17 (1.975)
63.50 (2.500) 62.87 (2.475)
76.20 (3.000) 75.57 (2.975)
60
68
80
100
120
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
104
IDC Systems
Flat Ribbon Cables
.025" PITCH FLAT CABLE
132 SERIES
(30 AWG STRANDED (TPE)
LR53375 E41651
P
HYSICAL PROPERTIES
I
NSULATION MATERIAL: Thermoplastic Elastomer
(TPE)
C
C
OLOR: White
ONDUCTORS: 30 AWG (7/38) Tinned Stranded
Copper
E
LECTRICAL
PROPERTIES
V
OLTAGE RATING: 150V rms
12
I
I
NSULATION RESISTANCE: >1X10 Ohms/FT
MPEDANCE: 80 Ohms
C
APACITANCE @ 1 MH
Z
: 65.61 pF/m (17.8 pF/ft.)
I
NDUCTANCE @ 1 MH
Z: .433 µH/m (.132 µH/ft.)
P
R
N
ROPOGATION DELAY: 4.93 ns/m (1.47 ns/ft.)
ISE TIME: 5
EAR END %: 1.9
FAR END %: 3.1
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE: -20˚ C to +105˚ C
(-4˚ F to +221˚ F)
A
PPLICATION
UTTER: 779-5030M
ACKAGING
TANDARD: Splice free 100 foot rolls with UL/CSA
TOOLING
C
ABLE C
P
S
markings on reels.
O
PTIONAL: Other roll quantities and labeling
options available. See page 129 for details.
UL Style No. 20650
UL94VW-1 COMPLIANT
Ordering Information
NUMBER OF
CONDUCTORS
CATALOG
NUMBER
DIMENSIONS
A
B
20
26
132-020
132-026
132-030
132-034
132-040
132-050
132-060
132-068
132-080
132-100
132-120
12.70 (.500)
16.51 (.650)
19.05 (.750)
21.59 (.850)
25.40 (1.000)
12.07 (.475)
15.88 (.625)
18.42 (.725)
20.96 (.825)
24.77 (.975)
30
34
40
50
31.75 (1.250) 31.12 (1.225)
38.10 (1.500) 37.47 (1.475)
43.18 (1.700) 42.55 (1.675)
50.80 (2.000) 50.17 (1.975)
63.50 (2.500) 62.87 (2.475)
76.20 (3.000) 75.57 (2.975)
60
68
80
100
120
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
105
IDC Systems
Flat Ribbon Cables
.025" PITCH FLAT CABLE
134 SERIES, FAST SCSI
(30 AWG SOLID, TPO)
LR92984 E60980
P
HYSICAL
P
ROPERTIES
I
NSULATION MATERIAL: Thermoplastic Olefinic
(TPO)
C
C
OLOR: white
ONDUCTORS: 30 AWG, solid
E
LECTRICAL PROPERTIES
V
OLTAGE
NSULATION
MPEDANCE: 90 Ohms
APACITANCE @ 1 MH
NDUCTANCE @ 1 MH
RATING: 150V rms
10
I
I
R
ESISTANCE: >10 0hms
C
Z
: 53 pF/M (16.0 pF/ft)
I
Z
: .43 mH/M (.13 uH/ft)
P
ROPAGATION DELAY: 4.43 nSec/M (1.348 nSec/ft)
E
NVIRONMENTAL ROPERTIES
P
T
EMPERATURE RATING: -20˚C TO 105°C (-4˚F to
+221˚F)
A
PPLICATION
UTTER: 779-5030M
PACKAGING
TANDARD: Splice free 100 foot rolls with UL/CSA
markings on reel
PTIONAL: Other roll quantities and labeling
TOOLING
C
ABLE C
S
O
options available. See page 129 for details.
UL94VW-1 COMPLIANT
Ordering Information
NUMBER OF
CONDUCTORS
CATALOG
NUMBER
DIMENSIONS
A
B
20
26
30
34
40
50
60
68
80
134-020
134-026
134-030
134-034
134-040
134-050
134-060
134-068
134-080
12.70 (.500)
16.51 (.650)
19.05 (.750)
21.59 (.850)
25.40 (1.000)
12.07 (.475)
15.88 (.625)
18.42 (.725)
20.96 (.825)
24.77 (.975)
31.75 (1.250) 31.12 (1.225)
38.10 (1.500) 37.47 (1.475)
43.18 (1.700) 42.55 (1.675)
50.80 (2.000) 50.17 (1.975)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
106
IDC Systems
Flat Ribbon Cables
.025" PITCH FLAT CABLE
138 SERIES, FAST SCSI
(31 AWG SOLID, TPO)
LR92984 E60980
P
HYSICAL
P
ROPERTIES
I
NSULATION MATERIAL: Thermoplastic Polyolefin
(TPO)
C
C
OLOR: white
ONDUCTORS: 31 AWG, solid
E
LECTRICAL PROPERTIES
V
OLTAGE
NSULATION
MPEDANCE: 96 Ohms
APACITANCE @ 1 MH
NDUCTANCE @ 1 MH
RATING: 150V rms
10
I
I
R
ESISTANCE: >10 0hms
C
Z
: 49 pF/M (14.8 pF/ft)
I
Z
: .50 mH/M (.15 uH/ft)
P
ROPAGATION DELAY: 4.43 nSec/M (1.348 nSec/ft)
E
NVIRONMENTAL ROPERTIES
P
T
EMPERATURE RATING: -20˚C TO 105°C (-4˚F to
+221˚F)
A
PPLICATION
UTTER: 779-5030M
PACKAGING
TANDARD: Splice free 100 foot rolls with UL/CSA
markings on reel
PTIONAL: Other roll quantities and labeling
TOOLING
C
ABLE C
S
O
options available. See page 129 for details.
UL94VW-1 COMPLIANT
Ordering Information
NUMBER OF
CONDUCTORS
CATALOG
NUMBER
DIMENSIONS
A
B
20
26
30
34
40
50
60
68
80
138-020
138-026
138-030
138-034
138-040
138-050
138-060
138-068
138-080
12.70 (.500)
16.51 (.650)
19.05 (.750)
21.59 (.850)
25.40 (1.000)
12.07 (.475)
15.88 (.625)
18.42 (.725)
20.96 (.825)
24.77 (.975)
31.75 (1.250) 31.12 (1.225)
38.10 (1.500) 37.47 (1.475)
43.18 (1.700) 42.55 (1.675)
50.80 (2.000) 50.17 (1.975)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
107
IDC Systems
Flat Ribbon Cables
.025" PITCH FLAT CABLE
139 SERIES, FAST SCSI
(31 AWG STRANDED, TPO)
LR92984 E60980
P
HYSICAL
P
ROPERTIES
I
NSULATION MATERIAL: Thermoplastic Polyolefin
(TPO)
C
C
OLOR: white
ONDUCTORS: 31 AWG, (7/39) tinned stranded
copper
E
LECTRICAL
PROPERTIES
V
OLTAGE
NSULATION
MPEDANCE: 90 Ohms
APACITANCE @ 1 MH
NDUCTANCE @ 1 MH
RATING: 150V rms
10
I
I
R
ESISTANCE: >10 0hms
C
Z
: 65.6 pF/M (16.0 pF/ft)
I
Z
: .43 mH/M (.13 uH/ft)
P
ROPAGATION DELAY: 4.93 nSec/M (1.32 nSec/ft)
E
NVIRONMENTAL ROPERTIES
P
T
EMPERATURE RATING: -20˚C TO 105°C (-4˚F to
+221˚F)
A
PPLICATION
UTTER: 779-5030M
PACKAGING
TANDARD: Splice free 100 foot rolls with UL/CSA
markings on reel
PTIONAL: Other roll quantities and labeling
TOOLING
C
ABLE C
S
O
options available. See page 129 for details.
UL94VW-1 COMPLIANT
Ordering Information
NUMBER OF
CONDUCTORS
CATALOG
NUMBER
DIMENSIONS
A
B
20
26
30
34
40
50
60
68
80
139-020
139-026
139-030
139-034
139-040
139-050
139-060
139-068
139-080
12.70 (.500)
16.51 (.650)
19.05 (.750)
21.59 (.850)
25.40 (1.000)
12.07 (.475)
15.88 (.625)
18.42 (.725)
20.96 (.825)
24.77 (.975)
31.75 (1.250) 31.12 (1.225)
38.10 (1.500) 37.47 (1.475)
43.18 (1.700) 42.55 (1.675)
50.80 (2.000) 50.17 (1.975)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
108
IDC Systems
Flat Ribbon Cables
.025" PITCH FLAT CABLE
140 SERIES
(32 AWG STRANDED TEFLON )
®
LL53375
E41651
P
HYSICAL ROPERTIES
P
I
NSULATION MATERIAL: Extruded (Teflon) FEP
C
C
OLOR: Natural
ONDUCTORS: 32 AWG, 7/40 silver plated,
stranded copper
E
LECTRICAL ROPERTIES
P
V
OLTAGE RATING: 150V rms
11
I
I
NSULATION RESISTANCE: >10 Ohms
MPEDANCE: 95 Ohms
C
APACITANCE @ 1 MH
Z
: 42.6 pF/m (13.0 pF/ft.)
: .52 µH/m (.16 µH/ft.)
ROPOGATION DELAY: 4.33 nSec/m (1.32 nSec/ft.)
I
NDUCTANCE @ 1 MH
Z
P
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE RATING: 200˚ C
A
PPLICATION
UTTER: 779-5030M
ACKAGING
TANDARD: Splice free 100 foot rolls
TOOLING
C
ABLE C
P
S
UL Style No. 20726
UL94VW-1 COMPLIANT
Ordering Information
NUMBER OF
CONDUCTORS
CATALOG
NUMBER
DIMENSIONS
A
B
20
26
30
40
50
68
80
100
140-020
140-026
140-030
140-040
140-050
140-068
140-080
140-100
12.70 (.500)
16.51 (.650)
19.05 (.750)
25.40 (1.000)
12.07 (.475)
15.88 (.625)
18.41 (.725)
24.76 (.975)
31.75 (1.250) 31.11 (1.225)
43.18 (1.700) 42.54 (1.675)
50.80 (2.000) 50.16 (1.975)
63.50 (2.500) 62.86 (2.475)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
109
IDC Systems
Flat Ribbon Cables
.025" PITCH FLAT CABLE
141 SERIES
®
(30 AWG SOLID TEFLON )
LL53375
E41651
P
HYSICAL ROPERTIES
P
I
NSULATION MATERIAL: Extruded Teflon FEP
C
C
OLOR: Natural
ONDUCTORS: 30 AWG, silver plated, solid copper
E
LECTRICAL PROPERTIES
V
OLTAGE RATING: 150V rms
11
I
I
NSULATION RESISTANCE: >10 Ohms
MPEDANCE: 90 Ohms
C
APACITANCE @ 1 MH
Z
: 45.9 pF/m (14.0 pF/ft.)
: .48 µH/m (.14 µH/ft.)
ROPOGATION DELAY: 4.30 nSec/m (1.32 nSec/ft.)
I
NDUCTANCE @ 1 MH
Z
P
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE RATING: 150˚ C
A
PPLICATION
UTTER: 779-5030M
ACKAGING
TANDARD: Splice free 100 foot rolls
TOOLING
C
ABLE C
P
S
UL Style No. 20726
UL94VW-1 COMPLIANT
Ordering Information
NUMBER OF
CONDUCTORS
CATALOG
NUMBER
DIMENSIONS
A
B
20
26
30
40
50
68
80
100
141-020
141-026
141-030
141-040
141-050
141-068
141-080
141-100
12.70 (.500)
16.51 (.650)
19.05 (.750)
25.40 (1.000)
12.07 (.475)
15.88 (.625)
18.41 (.725)
24.76 (.975)
31.75 (1.250) 31.11 (1.225)
43.18 (1.700) 42.54 (1.675)
50.80 (2.000) 50.16 (1.975)
63.50 (2.500) 62.86 (2.475)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
110
IDC Systems
Flat Ribbon Cables
.025" PITCH JACKETED, SHIELDED FLAT CABLE
188 SERIES
(30 AWG SOLID PVC)
LL53375
HYSICAL
E41651
P
P
ROPERTIES
I
NSULATION MATERIAL, CABLE: Flexible PVC
OLOR, CABLE: Blue/Grey
NSULATION MATERIAL, JACKET: Flexible PVC
C
I
C
C
OLOR, JACKET: Black
ONDUCTORS: 30 AWG, solid bare copper
E
LECTRICAL PROPERTIES
V
OLTAGE RATING: 150V rms
10
I
I
NSULATION RESISTANCE: >10 Ohms/3m (10 ft.)
MPEDANCE (GSG SHIELDED ROUND): 55 Ohms
APACITANCE @ 1 MH : 98.4 pF/m (30.0 pF/ft.)
NDUCTANCE @ 1 MH : .39 µH/m (.12 µH/ft.)
ROPOGATION DELAY: 5.09 nSec/m (1.55 nSec/ft.)
G
C
I
P
Z
Z
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE RATING: –20˚ C to 105˚ C
A
PPLICATION
UTTER: 779-5030M
EATURES
TOOLING
C
ABLE C
F
• CSA certified AWM for external wiring
• Foil shielding provides EMI/RFI protection
• Jacketing provides cable durability
P
ACKAGING
S
TANDARD: Splice free 100 foot rolls
UL Style No. 2912
UL94VW-1 COMPLIANT
Ordering Information
NUMBER OF
CONDUCTORS
CATALOG
NUMBER
DIMENSIONS
A
B
20
26
40
50
60
68
80
100
188-020
188-026
188-040
188-050
188-060
188-068
188-080
188-100
12.70 (.500)
16.51 (.650)
25.40 (1.000)
12.07 (.475)
15.88 (.625)
24.77 (.975)
31.75 (1.250) 31.12 (1.225)
38.10 (1.500) 37.47 (1.475)
43.18 (1.700) 42.55 (1.675)
50.80 (2.000) 50.17 (1.975)
63.50 (2.500) 62.87 (2.475)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
111
IDC Systems
Flat Ribbon Cables
.025" PITCH GROUND PLANE FLAT CABLE
198 SERIES
(30 AWG SOLID PVC)
LL53375
E41651
P
HYSICAL ROPERTIES
P
I
NSULATION MATERIAL: Flexible PVC
C
C
G
OLOR: Blue/Grey
ONDUCTORS AND
PLANE WIRE: 30 AWG, solid bare copper
ROUND
P
LANE: Expanded copper mesh, .13 (.005) thick
E
LECTRICAL ROPERTIES
P
V
OLTAGE RATING: 300V rms
10
I
I
NSULATION RESISTANCE: >10 Ohms/3m (10 ft.)
MPEDANCE (GSG SHIELDED ROUND): 65 Ohms
APACITANCE @ 1 MH : 98.4 pF/m (30.0 pF/ft.)
NDUCTANCE @ 1 MH : .46 µH/m (.14 µH/ft.)
ROPOGATION DELAY: 5.41 nSec/m (1.65 nSec/ft.)
G
C
I
P
Z
Z
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE RATING: –20˚ C to 105˚ C
A
PPLICATION
UTTER: 779-5030M
EATURES
TOOLING
C
ABLE C
F
• Ground plane structure provides increased signal density
and improved transmission characteristics
• Ground plane can be removed by hand for easy
connector application
P
ACKAGING
S
TANDARD: Splice free 100 foot rolls
UL Style No. 2682
UL94VW-1 COMPLIANT
Ordering Information
NUMBER OF
CONDUCTORS
CATALOG
NUMBER
DIMENSIONS
A
B
20
26
40
50
60
68
80
100
198-020
198-026
198-040
198-050
198-060
198-068
198-080
198-100
12.70 (.500)
16.51 (.650)
25.40 (1.000)
12.07 (.475)
15.88 (.625)
24.77 (.975)
31.75 (1.250) 31.12 (1.225)
38.10 (1.500) 37.47 (1.475)
43.18 (1.700) 42.55 (1.675)
50.80 (2.000) 50.17 (1.975)
63.50 (2.500) 62.87 (2.475)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
112
IDC Systems
.025” PITCH ROUND-TO-FLAT CABLE
(FOIL/ BRAID/ SHIELD)
302 SERIES
(30 AWG SOLID)
LL53375
HYSICAL
E41651
P
I
P
ROPERTIES
NSULATION MATERIAL
C
C
ABLE: Flexible PVC
OLOR, CABLE: Blue/gray
J
ACKET: Flexible PVC
C
C
D
OLOR, JACKET: Black
ONDUCTORS: 30 AWG, solid bare copper
ISTANCE
BETWEEN FLAT TERMINATION SECTIONS: 1.375"
E
LECTRICAL PROPERTIES
V
OLTAGE
NSULATION
MPEDANCE @ 1MH
NDUCTANCE @ 1MH
ROPAGATION
ELAY: 5.25 nSec/m (1.60 nSec/ft.)
R
ATING: 150V ms
ESISTANCE: > 10 Ohms/3m (10 ft.)
: 88.6 pF/m (27.0 pF/ft.)
: .39 uH/m (.12 uH/ft.)
I
I
I
R
Z
Z
P
D
E
NVIRONMENTAL ROPERTIES
ATING: -20˚ C to 105˚ C
PPLICATION OOLING
779-5030M
P
T
EMPERATURE R
A
T
Ordering Information
Reference
C
ABLE
C
UTTER
:
NUMBER OF
CATALOG
NUMBER
DIMENSIONS
Packaged on splice-free 100’ rolls.
CONDUCTORS
A
B
F
EATURES
26
40
302-026
302-040
302-050
302-060
302-068
302-080
302-100
16.51 (.650)
15.88 (.625)
24.77 (.975)
• PVC jacket prevents damage in external
applications
25.40 (1.000)
• Round cross-section allows maximum system
airflow
• Shielding braid provides EMI / RFI protection
• Alternating flat and slit sections along cable length allow mass
termination of IDC connector without the need for lamination or
lacing equipment
50
31.75 (1.250) 31.12 (1.225)
38.10 (1.500) 37.47 (1.475)
43.18 (1.700) 42.55 (1.675)
50.80 (2.000) 50.17 (1.975)
63.50 (2.500) 62.87 (2.475)
60
68
80
100
UL94VW-1 COMPLIANT
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
113
IDC Systems
Flat Ribbon Cables
TRANSITION CABLE
ONE SPREAD END
.025" TO .050"
(30 AWG SOLID PVC)
LL58162
E47817
P
HYSICAL ROPERTIES
P
I
NSULATION MATERIAL: Flexible PVC
C
C
OLOR: Blue/Grey
ONDUCTORS: 30 AWG, solid bare copper
E
LECTRICAL PROPERTIES
V
OLTAGE RATING: 150V rms
10
I
I
NSULATION RESISTANCE: >10 Ohms
MPEDANCE: 80 Ohms
C
APACITANCE @ 1 MH
Z
: 62.3 pF/m (19.0 pF/ft.)
: .49 µH/m (.15 µH/ft.)
ROPOGATION DELAY: 5.25 nSec/m (1.60 nSec/ft.)
I
NDUCTANCE @ 1 MH
Z
P
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE RATING: –20˚ C to 105˚ C
136 - XXX XX XX
Length
in Inches
# of Conductors
Length
in Feet
Ordering Information
NUMBER OF
CONDUCTORS
CATALOG
NUMBER
DIMENSIONS
C
A
B
D
E*
20
26
30
34
40
50
60
136-020-0100 12.70 (.500)
136-026-0100 16.51 (.650)
136-030-0100 19.05 (.750)
136-034-0100 21.59 (.850)
136-040-0100 25.40 (1.000)
12.07 (.475)
15.88 (.625)
18.42 (.725)
20.96 (.825)
24.77 (.975)
24.13 (.950)
25.40 (1.000)
305 (12.0)
305 (12.0)
305 (12.0)
305 (12.0)
305 (12.0)
305 (12.0)
305 (12.0)
31.75 (1.250) 33.02 (1.300)
36.83 (1.450) 38.10 (1.500)
41.91 (1.650) 43.18 (1.700)
49.53 (1.950) 50.80 (2.000)
136-050-0100 31.75 (1.250) 31.12 (1.225) 62.23 (2.450) 63.50 (2.500)
136-060-0100 38.10 (1.500) 37.47 (1.475) 74.93 (2.950) 76.20 (3.000)
* Other custom cable lengths available on request.
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
114
IDC Systems
Flat Ribbon Cables
TRANSITION CABLE
TWO SPREAD ENDS
.050" TO .025" TO .050"
(30 AWG SOLID PVC)
LL58162
E47817
P
HYSICAL ROPERTIES
P
I
NSULATION MATERIAL: Flexible PVC
C
C
OLOR: Blue/Grey
ONDUCTORS: 30 AWG, solid bare copper
E
LECTRICAL PROPERTIES
V
OLTAGE RATING: 150V rms
10
I
I
NSULATION RESISTANCE: >10 Ohms
MPEDANCE: 80 Ohms
C
APACITANCE @ 1 MH
Z
: 62.3 pF/m (19.0 pF/ft.)
: .49 µH/m (.15 µH/ft.)
ROPOGATION DELAY: 5.25 nSec/m (1.60 nSec/ft.)
I
NDUCTANCE @ 1 MH
Z
P
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE RATING: –20˚ C to 105˚ C
UL94VW-1 COMPLIANT
136 - XXX XX XX
Length
in Inches
# of Conductors
Length
in Feet
Ordering Information
NUMBER OF
CATALOG
DIMENSIONS
C
CONDUCTORS NUMBER
A
B
D
E*
20
26
30
34
40
50
60
136-020-0100D 12.70 (.500)
136-026-0100D 16.51 (.650)
136-030-0100D 19.05 (.750)
136-034-0100D 21.59 (.850)
136-040-0100D 25.40 (1.000)
12.07 (.475)
15.88 (.625)
18.42 (.725)
20.96 (.825)
24.77 (.975)
24.13 (.950)
25.40 (1.000)
305 (12.0)
305 (12.0)
305 (12.0)
305 (12.0)
305 (12.0)
305 (12.0)
305 (12.0)
31.75 (1.250) 33.02 (1.300)
36.83 (1.450) 38.10 (1.500)
41.91 (1.650) 43.18 (1.700)
49.53 (1.950) 50.80 (2.000)
136-050-0100D 31.75 (1.250) 31.12 (1.225) 62.23 (2.450) 63.50 (2.500)
136-060-0100D 38.10 (1.500) 37.47 (1.475) 74.93 (2.950) 76.20 (3.000)
* Other custom cable lengths available on request.
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
115
IDC Systems
Flat Ribbon Cables
.050" PITCH
F
LAT
C
ABLE
S
ERIES 171 – 28 AWG (7/36) STRANDED
LL53375
E41651
P
HYSICAL
P
ROPERTIES
I
NSULATION MATERIAL: PVC
C
C
ONDUCTORS: 28 AWG, Stranded
IN): 1.27 (.050)
ONDUCTOR
SPACING MM (
E
LECTRICAL PROPERTIES
V
OLTAGE RATING: 300V rms
10
I
I
NSULATION RESISTANCE: >10 Ohms
MPEDANCE: 100 Ohms
C
APACITANCE @ 1 MH
Z
: 46 pF/m (14.0 pF/ft.)
: .46 µH/m (.14 µH/ft.)
ROPOGATION DELAY: 4.53 nSec/m (1.38 nSec/ft.)
I
NDUCTANCE @ 1 MH
Z
P
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE RATING: 105˚ C
P
ACKAGING
TANDARD: Splice free 100 foot rolls with UL/CSA markings on reels
PTIONAL: Other roll quantities and labeling options available. See page 129 for details.
S
O
Accumulation of pitch tolerance between
conductors in entire cable may not exceed
tolerance of dim. “B”.
T
YPICAL CROSSTALK CHARACTERISTICS: 10FT Sample, 1 line driven, 1 line sensed
Test Method
G-S-G
3.0
G-G-S-G-G
Rise Time nSec
Near End (%)
Far End (%)
7.0
3.2
2.7
5.0
6.7
UL Style No. 2651
Ordering Information
UL94VW-1 COMPLIANT
NO.
DIMENSIONS IN MM (INCHES)
28 GAUGE
OF
A
B
B
STRANDED
POS.
TOLERANCE
171-9
171-10ED
171-12
171-14
171-15
171-16
171-20
171-24ED
171-25
171-26
171-28
171-30ED
171-34
171-36
171-37
171-40ED
171-44
171-50
171-56
171-60
171-64
9
11.43 (.450) 10.16 (.400)
12.70 (.500) 11.43 (.450)
15.24 (.600) 13.97 (.550)
17.78 (.7 00) 16.51 (.650)
19.05 (.750) 17.78 (.700)
20.32 (.800) 19.05 (.750)
25.40 (1.000) 24.13 (.950)
30.48 (1.200) 29.21 (1.150)
31.75 (1.250) 30.48 (1.200)
33.02 (1.300) 31.75 (1.250)
35.56 (1.400) 34.29 (1.350)
38.10 (1.500) 36.83 (1.450)
43.18 (1.700) 41.91 (1.650)
45.72 (1.800) 44.45 (1.750)
46.99 (1.850) 45.72 (1.800)
50.80 (2.000) 49.53 (1.950)
55.88 (2.200) 54.61 (2.150)
63.50 (2.500) 62.23 (2.450)
71.12 (2.800) 69.85 (2.750)
76.20 (3.000) 74.93 (2.950)
81.28 (3.200) 80.01 (3.150)
± .18
10
12
14
15
16
20
24
25
26
28
30
34
36
37
40
44
50
56
60
64
(±.007)
± .25
(±.010)
± .38
(±.015)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
116
IDC Systems
Flat Ribbon Cables
.050" PITCH
F
LAT
C
ABLE
S
ERIES 173 – 28 AWG SOLID
LL53375
E41651
P
HYSICAL
P
ROPERTIES
I
NSULATION MATERIAL: PVC
C
C
ONDUCTORS: 28 AWG, Solid
ONDUCTOR PACING MM
IN): 1.27 (.050)
S
(
E
LECTRICAL PROPERTIES
V
OLTAGE RATING: 300V rms
10
I
I
NSULATION RESISTANCE: >10 Ohms
MPEDANCE: 105 Ohms
C
APACITANCE @ 1 MH
Z
: 44.3 pF/m (13.5 pF/ft.)
: .49 µH/m (.15 µH/ft.)
ROPOGATION DELAY: 4.53 nSec/m (1.38 nSec/ft.)
I
NDUCTANCE @ 1 MH
Z
P
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE RATING: 105˚ C
P
ACKAGING
TANDARD: Splice free 100 foot rolls with UL/CSA markings on reels
PTIONAL: Other roll quantities and labeling options available. See page 129 for details.
S
Accumulation of pitch tolerance between
conductors in entire cable may not exceed
tolerance of dim. “B”.
O
T
YPICAL CROSSTALK CHARACTERISTICS: 10FT Sample, 1 line driven, 1 line sensed
Test Method
G-S-G
3.0
4.8
G-G-S-G-G
Rise Time nSec
Near End (%)
Far End (%)
7.0
3.1
2.9
7.3
UL Style No. 2651
Ordering Information
UL94VW-1 COMPLIANT
CATALOG NUMBERS
28 GAUGE
NO.
DIMENSIONS IN MM (INCHES)
OF
A
B
B
SOLID
POS.
TOLERANCE
173-9
173-10
—
9
11.43 (.450) 10.16 (.400)
12.70 (.500) 11.43 (.450)
15.24 (.600) 13.97 (.550)
17.78 (.7 00) 16.51 (.650)
19.05 (.750) 17.78 (.700)
20.32 (.800) 19.05 (.750)
25.40 (1.000) 24.13 (.950)
30.48 (1.200) 29.21 (1.150)
31.75 (1.250) 30.48 (1.200)
33.02 (1.300) 31.75 (1.250)
35.56 (1.400) 34.29 (1.350)
38.10 (1.500) 36.83 (1.450)
43.18 (1.700) 41.91 (1.650)
45.72 (1.800) 44.45 (1.750)
46.99 (1.850) 45.72 (1.800)
50.80 (2.000) 49.53 (1.950)
55.88 (2.200) 54.61 (2.150)
63.50 (2.500) 62.23 (2.450)
71.12 (2.800) 69.85 (2.750)
76.20 (3.000) 74.93 (2.950)
81.28 (3.200) 80.01 (3.150)
± .18
10
12
14
15
16
20
24
25
26
28
30
34
36
37
40
44
50
56
60
64
(±.007)
173-14
173-15
173-16
173-20
173-24
173-25
173-26
—
± .25
(±.010)
—
173-34
—
173-37
173-40
173-44
173-50
173-56
173-60
—
± .38
(±.015)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
117
IDC Systems
Flat Ribbon Cables
.050" PITCH
F
LAT
C
ABLE
S
ERIES 179 – 26 AWG (7/34) STRANDED
LL53375
E41651
P
HYSICAL
P
ROPERTIES
I
NSULATION MATERIAL: PVC
C
C
ONDUCTORS: 26 AWG, Stranded
IN): 1.27 (.050)
ONDUCTOR
SPACING MM (
E
LECTRICAL PROPERTIES
V
OLTAGE RATING: 300V rms
10
I
I
NSULATION RESISTANCE: >10 Ohms
MPEDANCE: 93 Ohms
C
APACITANCE @ 1 MH
Z
: 49.5 pF/m (15.1 pF/ft.)
: .43 µH/m (.13 µH/ft.)
ROPOGATION DELAY: 4.43 nSec/m (1.35 nSec/ft.)
I
NDUCTANCE @ 1 MH
Z
P
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE RATING: 105˚ C
P
ACKAGING
TANDARD: Splice free 100 foot rolls with UL/CSA markings on reels
PTIONAL: Other roll quantities and labeling options available. See page 129 for details.
S
Accumulation of pitch tolerance between
conductors in entire cable may not exceed
tolerance of dim. “B”.
O
T
YPICAL CROSSTALK CHARACTERISTICS: 10FT Sample, 1 line driven, 1 line sensed
Test Method
G-S-G
3.0
5.2
G-G-S-G-G
Rise Time nSec
Near End (%)
Far End (%)
7.0
3.8
2.3
6.1
UL Style No. 2651
Ordering Information
UL94VW-1 COMPLIANT
NO.
OF
DIMENSIONS IN MM (INCHES)
26 GAUGE
SOLID
A
B
B
POS.
TOLERANCE
179-9
—
9
11.43 (.450) 10.16 (.400)
12.70 (.500) 11.43 (.450)
15.24 (.600) 13.97 (.550)
17.78 (.7 00) 16.51 (.650)
19.05 (.750) 17.78 (.700)
20.32 (.800) 19.05 (.750)
25.40 (1.000) 24.13 (.950)
30.48 (1.200) 29.21 (1.150)
31.75 (1.250) 30.48 (1.200)
33.02 (1.300) 31.75 (1.250)
35.56 (1.400) 34.29 (1.350)
38.10 (1.500) 36.83 (1.450)
43.18 (1.700) 41.91 (1.650)
45.72 (1.800) 44.45 (1.750)
46.99 (1.850) 45.72 (1.800)
50.80 (2.000) 49.53 (1.950)
55.88 (2.200) 54.61 (2.150)
63.50 (2.500) 62.23 (2.450)
71.12 (2.800) 69.85 (2.750)
76.20 (3.000) 74.93 (2.950)
81.28 (3.200) 80.01 (3.150)
± .18
10
12
14
15
16
20
24
25
26
28
30
34
36
37
40
44
50
56
60
64
(±.007)
—
179-14
179-15
179-16
179-20
179-24
179-25
179-26
—
± .25
(±.010)
179-30
179-34
179-36
—
179-40
179-44
179-50
—
± .38
(±.015)
—
—
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
118
IDC Systems
Flat Ribbon Cables
.050" PITCH TPE FLAT
C
ABLE
S
ERIES 177 – 28 AWG STRANDED
LL53375
E41651
P
HYSICAL ROPERTIES
P
I
NSULATION MATERIAL: TPE
C
C
ONDUCTORS: 28 AWG, Stranded
IN): 1.27 (.050)
ONDUCTOR
SPACING MM (
E
LECTRICAL PROPERTIES
V
OLTAGE RATING: 300V rms
10
I
I
NSULATION RESISTANCE: >10 Ohms
MPEDANCE: 96 Ohms
C
APACITANCE @ 1 MH
Z
: 53 pF/m (16.0 pF/ft.)
: .51 µH/m (.16 µH/ft.)
ROPOGATION DELAY: 4.53 nSec/m (1.38 nSec/ft.)
I
NDUCTANCE @ 1 MH
Z
P
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE RATING: 105˚ C
P
ACKAGING
TANDARD: Splice free 100 foot rolls with UL/CSA markings on reels
PTIONAL: Other roll quantities and labeling options available. See page 129 for details.
S
Accumulation of pitch tolerance between
conductors in entire cable may not exceed
tolerance of dim. “B”.
O
T
YPICAL CROSSTALK CHARACTERISTICS: 10FT Sample, 1 line driven, 1 line sensed
Test Method
G-S-G
3.0
5.0
G-G-S-G-G
Rise Time nSec
Near End (%)
Far End (%)
7.0
3.2
2.7
6.7
UL Style No. 2651
UL94VW-1 COMPLIANT
Ordering Information
NUMBER
DIMENSIONS IN MM (INCHES)
CATALOG
NUMBERS
OF
A
B
B
CONDUCTORS
TOLERANCE
177-9
177-10
177-14
177-16
177-18
177-20
177-22
177-24
177-26
177-34
177-40
177-50
177-64
9
11.43 (.450) 10.16 (.400)
12.70 (.500) 11.43 (.450)
17.78 (.7 00) 16.51 (.650)
20.32 (.800) 19.05 (.750)
22.86 (.900) 21.59 (.850)
25.40 (1.000) 24.13 (.950)
27.94 (1.100) 26.67 (1.050)
30.48 (1.200) 29.21 (1.150)
33.02 (1.300) 31.75 (1.250)
43.18 (1.700) 41.91 (1.650)
50.80 (2.000) 49.53 (1.950)
63.50 (2.500) 62.23 (2.450)
81.28 (3.200) 80.01 (3.150)
± .18
10
14
16
18
20
22
24
26
34
40
50
64
(±.007)
± .25
(±.010)
± .38
(±.015)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
119
Mass Termination
IDC Systems
.050" (1.27MM) PITCH
HALOGEN-FREE CABLE
SERIES 199
28 AWG (7/36) STRANDED
LR92984 E60980
P
HYSICAL
IZE AWG: 28 Stranded (7 x 36)
ATERIAL: halogen-free Polyolefin
PROPERTIES
W
IRE S
I
NSULATION
M
compound
C
ONDUCTOR
S
PACING
I
NCHES
(
MM): .050 (1.27)
I
MPEDANCE (Ω): 100 5 Ohms
C
P
APACITANCE
ROPAGATION
(
D
PF
/
FT): 15
S/FT): 1.50
ELAY N
(
T
A
H
OXICITY
I
NDEX: 1.0
ENERATION: < 1%
ONTENT: < .1 (MIL-C-24643)
CID
GAS G
ALOGEN
C
E
LECTRICAL ROPERTIES
P
V
OLTAGE RATING (VRMS): 300
E
T
F
NVIRONMENTAL
ATING: -40˚C TO 105°C
LAMMABILITY: VW-1
PROPERTIES
EMPERATURE R
UL94VW-1 COMPLIANT
NOTE: OUTER CONDUCTOR MARKED RED
Ordering Information
CATALOG
NUMBER OF
DIMENSIONS IN MM (INCHES)
NUMBERS
199-09
199-10
199-14
199-16
199-20
199-26
199-30
199-34
199-40
199-50
CONDUCTORS
A
B
9
11.43 (.450)
12.70 (.500)
17.78 (.700)
20.32 (.800)
25.40 (1.00)
33.02 (1.30)
38.10 (1.50)
43.18 (1.85)
50.80 (2.00)
63.50 (2.50)
10.16 (.400)
11.43 (.450)
16.51 (.650)
19.05 (.750)
24.13 (.950)
31.75 (1.25)
36.83 (1.45)
41.91 (1.65)
49.53 (1.95)
62.23 (2.45)
10
14
16
20
26
30
34
40
50
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
120
IDC Systems
High Flex Life Flat Ribbon Cables
.050" PITCH
H
IGH
F
LEX
L
IFE
F
LAT
C
ABLE
S
ERIES 185 – 28 AWG STRANDED (19/40) STRANDED
LL53375
E41651
P
HYSICAL
PROPERTIES
I
NSULATION MATERIAL: PVC
C
C
ONDUCTORS: 28 AWG, (19/40) Stranded
IN): 1.27 (.050)
ONDUCTORS
SPACING MM (
E
LECTRICAL PROPERTIES
V
OLTAGE RATING: 300V rms
10
I
I
NSULATION RESISTANCE: >10 Ohms
MPEDANCE: 96 Ohms
C
APACITANCE @ 1 MH
Z
: 53 pF/m (16.0 pF/ft.)
: .51 µH/m (.16 µH/ft.)
ROPOGATION DELAY: 4.53 nSec/m (1.38 nSec/ft.)
I
NDUCTANCE @ 1 MH
Z
P
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE RATING: 105˚ C
F
EATURES
• Special 19/40 Conductor Stranding for Superior Flex Life; approx. 50 million cycles (1-1/2" loop)
ACKAGING
TANDARD: Splice free 100 foot rolls with UL/CSA markings on reels
PTIONAL: Other roll quantities and labeling options available. See page 129 for details.
P
S
O
T
YPICAL CROSSTALK CHARACTERISTICS: 10FT Sample, 1 line driven, 1 line sensed
Test Method
G-S-G
3.0
5.0
G-G-S-G-G
Rise Time nSec
Near End (%)
Far End (%)
7.0
3.2
2.7
6.7
UL Style No. 2651
UL94VW-1 COMPLIANT
Ordering Information
DIMENSIONS IN MM (INCHES)
CATALOG
NUMBERS
NUMBER OF
B
CONDUCTORS
A
B
TOLERANCE
185-09
185-10
185-14
185-16
185-18
185-20
185-22
185-24
185-26
185-34
185-40
185-50
9
11.43 (.450)
12.70 (.500)
17.78 (.700)
20.32 (.800)
22.86 (.900)
25.40 (1.000)
27.94 (1.100)
30.48 (1.200)
33.02 (1.300)
43.18 (1.700)
50.80 (2.000)
63.50 (2.500)
10.16 (.400)
11.43 (.450)
16.51 (.650)
19.05 (.750)
21.59 (.850)
24.13 (.950)
26.67 (1.050)
29.21 (1.150)
31.75 (1.250)
41.91 (1.650)
49.53 (1.950)
62.23 (2.450)
.18 (.007)
.18 (.007)
.18 (.007)
.25 (.010)
.25 (.010)
.25 (.010)
.25 (.010)
.25 (.010)
.25 (.010)
.25 (.010)
.38 (.015)
.38 (.015)
10
14
16
18
20
22
24
26
34
40
50
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
121
IDC Systems
Flat Ribbon Cables
.050" PITCH
J
ACKETED
F
LAT
C
ABLE
S
ERIES 174 – 28 AWG (7/36) STRANDED
LL53375
E41651
P
HYSICAL ROPERTIES
P
I
NSULATION MATERIAL: Polyethylene with PVC Jacket
C
C
ONDUCTORS: 28 AWG, Stranded
IN): 1.27 (.050)
ONDUCTOR
SPACING MM (
E
LECTRICAL PROPERTIES
V
OLTAGE RATING: 90V rms
10
I
I
NSULATION RESISTANCE: >10 Ohms
MPEDANCE: 93 Ohms
C
APACITANCE @ 1 MH
Z
: 63.0 pF/m (19.2 pF/ft.)
: .56 µH/m (.17 µH/ft.)
ROPOGATION DELAY: 5.25 nSec/m (1.60 nSec/ft.)
I
NDUCTANCE @ 1 MH
Z
P
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE RATING: 75˚ C
P
ACKAGING
TANDARD: Splice free 100 foot rolls with UL/CSA markings on reels
PTIONAL: Other roll quantities and labeling options available. See page 129 for details.
S
O
T
YPICAL CROSSTALK CHARACTERISTICS: 10FT Sample, 1 line driven, 1 line sensed
Test Method
G-S-G
3.0
4.5
G-G-S-G-G
Rise Time nSec
Near End (%)
Far End (%)
7.0
4.1
2.0
—
UL Style No. 2604
CABLE
SERIES
DIMENSIONS
IN MM (INCHES)
D
UL94VW-1 COMPLIANT
E
174
.86 (.034)
4.19 (.165)
Ordering Information
NO. OF
SERIES 174
DIMENSIONS IN MM (INCHES)
B
CONDUCTORS
CABLESTRANDED
28 GAUGE
A
B
C
TOLERANCE
9
174-09
174-10
174-14
174-15
174-16
174-20
174-24
174-25
174-26
174-34
174-36
174-37
174-40
174-44
174-50
174-56
174-60
174-64
11.43 (.450)
12.70 (.500)
17.78 (.700)
19.05 (.750)
20.32 (.800)
10.16 (.400)
11.43 (.450)
16.51 (.650)
17.78 (.700)
19.05 (.750)
14.48 (.570)
15.75 (.620)
20.83 (.820)
22.10 (.870)
23.37 (.920)
28.45 (1.120)
33.53 (1.320)
34.80 (1.370)
36.07 (1.420)
46.23 (1.820)
48.77 (1.920)
50.04 (1.970)
53.85 (2.120)
58.93 (2.320)
66.55 (2.620)
74.17 (2.920)
79.25 (3.120)
84.33 (3.320)
10
14
15
16
20
24
25
26
34
36
37
40
44
50
56
60
64
.18 (.007)
25.40 (1.000) 24.13 (.950)
30.48 (1.200) 29.21 (1.150)
31.75 (1.250) 30.48 (1.200)
33.02 (1.300) 31.75 (1.250)
43.18 (1.700) 41.91 (1.650)
45.72 (1.800) 44.45 (1.750)
46.99 (1.850) 45.72 (1.800)
50.80 (2.000) 49.53 (1.950)
55.88 (2.200) 54.61 (2.150)
63.50 (2.500) 62.23 (2.450)
71.12 (2.800) 69.85 (2.650)
76.20 (3.000) 74.93 (2.950)
81.28 (3.200) 80.01 (3.150)
.25 (.010)
.38 (.015)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
122
IDC Systems
Flat Ribbon Cables
.050" PITCH
J
ACKETED
S
HIELDED
FLAT
CABLE
S
ERIES 187 – 28 AWG (7/36) STRANDED
LL53375
E41651
P
HYSICAL ROPERTIES
P
I
NSULATION MATERIAL: PVC
C
C
ONDUCTORS: 28 AWG, Stranded
IN): 1.27 (.050)
ONDUCTOR
SPACING MM (
E
LECTRICAL PROPERTIES
V
OLTAGE RATING: 300V rms
I
MPEDANCE: 40 Ohms
C
APACITANCE @ 1 MH
Z: 164.0 pF/m (50.0 pF/ft.)
P
ROPOGATION DELAY: 5.57 nSec/m (1.70 nSec/ft.)
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE RATING: 105˚ C
P
ACKAGING
S
TANDARD: Splice free 100 foot rolls with UL/CSA markings on reels
O
PTIONAL: Other roll quantities and labeling options available. See page 129 for details.
UL Style No. 20529
UL94VW-1 COMPLIANT
Ordering Information
CATALOG
NUMBERS
NUMBER OF
DIMENSIONS IN MM (INCHES)
B
CONDUCTORS
A
B TOLERANCE
.18 (.007)
.18 (.007)
.18 (.007)
.25 (.010)
.25 (.010)
.25 (.010)
.25 (.010)
.25 (.010)
.25 (.010)
.25 (.010)
.25 (.010)
.25 (.010)
.38 (.015)
.38 (.015)
.38 (.015)
.38 (.015)
.38 (.015)
.38 (.015)
C
.51 ( .02)
187-09
187-10
187-14
187-15
187-16
187-20
187-24
187-25
187-26
187-34
187-36
187-37
187-40
187-44
187-50
187-56
187-60
187-64
9
11.43 (.450)
12.70 (.500)
17.78 (.700)
19.05 (.750)
20.32 (.800)
25.40 (1.000)
30.48 (1.200)
31.75 (1.250)
33.02 (1.300)
43.18 (1.700)
45.72 (1.800)
46.99 (1.850)
50.80 (2.000)
55.88 (2.200)
63.50 (2.500)
71.12 (2.800)
76.20 (3.000)
81.28 (3.200)
10.16 (.400)
11.43 (.450)
16.51 (.650)
17.78 (.700)
19.05 (.750)
24.13 (.950)
29.21 (1.150)
30.48 (1.200)
31.75 (1.250)
41.91 (1.650)
44.45 (1.750)
45.72 (1.800)
49.53 (1.950)
54.61 (2.150)
62.23 (2.450)
69.85 (2.750)
74.93 (2.950)
80.01 (3.150)
14.73 (.580)
16.00 (.630)
21.08 (.830)
22.35 (.880)
23.62 (.930)
28.70 (1.130)
33.78 (1.330)
35.05 (1.380)
36.32 (1.530)
46.48 (1.830)
49.02 (1.930)
50.29 (1.980)
54.10 (2.130)
59.18 (2.330)
66.80 (2.630)
74.42 (2.930)
79.50 (3.130)
84.58 (3.330)
10
14
15
16
20
24
25
26
34
36
37
40
44
50
56
60
64
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
123
IDC Systems
Flat Ribbon Cables
.050" PITCH
G
ROUND
P
LANE
F
LAT
CABLE
S
ERIES 196 – 28 AWG (7/36) STRANDED
LL53375
E41651
P
HYSICAL ROPERTIES
P
I
NSULATION MATERIAL: PVC
C
C
ONDUCTORS: 28 AWG (7/36), Stranded
IN): 1.27 (.050)
ONDUCTOR
SPACING MM (
E
LECTRICAL PROPERTIES
V
OLTAGE RATING: 300V rms
I
MPEDANCE: 66 Ohms
C
APACITANCE @ 1 MH
Z: 95.0 pF/m (29.0 pF/ft.)
P
ROPOGATION DELAY: 6.07 nSec/m (1.85 nSec/ft.)
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE RATING: 105˚ C
UL Style No. 20218
UL94VW-1 COMPLIANT
Ordering Information
DIMENSIONS IN MM (INCHES)
CATALOG
NUMBERS
NUMBER OF
B
CONDUCTORS
A
2.54 (.10)
B
TOLERANCE
196-14
196-20
196-25
196-26
196-34
196-37
196-40
196-50
196-60
196-64
14
20
25
26
34
37
40
50
60
64
24.13 (.95)
31.75 (1.25)
38.10 (1.50)
39.37 (1.55)
49.53 (1.95)
53.34 (2.10)
57.15 (2.25)
69.85 (2.75)
82.55 (3.25)
87.63 (3.45)
16.51 (.650)
24 13 (.950)
30.48 (1.200)
31.75 (l 250)
41.91 (1.650)
45.72 (1.800)
49.53 (1.950)
62.23 (2.450)
74.93 (2.950)
80.01 (3.150)
.25 (.007)
.25 (.010)
.25 (.010)
.25 (.010)
.25 (.010)
.38 (.015)
.38 (.015)
.38 (.015)
.38 (.015)
.38 (.015)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
124
IDC Systems
Flat Ribbon Cables
.050" PITCH
T
WISTED
P
AIR
F
LAT
C
ABLE
S
ERIES 200 – 28 AWG (7/36) STRANDED
LL53375
E41651
P
HYSICAL
P
ROPERTIES
I
NSULATION MATERIAL: PVC
C
C
ONDUCTORS: 28 AWG (7/36), Stranded
IN): 1.27 (.050)
ONDUCTOR
SPACING MM (
E
LECTRICAL PROPERTIES
V
OLTAGE RATING: 300V rms
I
MPEDANCE: 100 Ohms
C
APACITANCE @ 1 MH
Z: (16.0 pF/ft.)
P
ROPOGATION DELAY: (1.56 nSec/ft.)
E
NVIRONMENTAL PROPERTIES
T
EMPERATURE RATING: 80˚ C
T
YPICAL ROSSTALK
C
C
HARACTERISTICS: 10FT Sample, 1 line driven, 1 line sensed
Test Method
G-S-G
3.0
6.3
G-G-S-G-G
Rise Time nSec
Near End (%)
Far End (%)
7.0
3.8
4.0
7.5
UL Style No. 20634
UL94VW-1 COMPLIANT
NOTES:
1. Adjacent pairs are twisted in opposite direction.
2. Color code: Alternating brown, red, orange, yellow, green, blue,
violet, gray, white, black, then repeated. Each color lead paired with a
tan (common).
3. This cable is listed under U.L. style #20634 at 300V and 80˚ C.
Ordering Information
CATALOG
NUMBERS
NUMBER OF
CONDUCTORS (PAIRS)
DIMENSIONS IN MM (INCHES)
C
D
200-10A
200-14A
200-16A
200-20A
200-24A
200-26A
200-34A
200-36A
200-40A
200-50A
200-60A
200-64A
10 (5)
14 (7)
11.43 0.08 (0.45 0.010)
16.51 0.25 (0.65 0 010)
19.05 0.25 (0.75 0.010)
24.13 0.25 (0.95 0.010)
29.21 0.25 (1.15 0.010)
31.75 0.25 (1.25 0.010)
41.91 0.35 (1.65 0.014)
44.45 0.35 (1.75 0.014)
49.53 0.35 (1.95 0.014)
62.23 0.35 (2.45 0.014)
74.93 0.35 (2.95 0.014)
80.01 0.35 (3.15 0.014)
12.29 0.40 (.484 0.016)
17.37 0.40 (.684 0.016)
19.91 0.40 (.784 0.016)
24.99 0.40 (.984 0.016)
30.07 0.40 (1.184 0.016)
32.61 0.40 (1.284 0.016)
42.77 0.53 (1.684 0.021)
45.31 0.53 (1.784 0.021)
47.85 0.53 (1.884 0.021)
63.09 0.53 (2.484 0.021)
75.79 0.53 (2.984 0.021)
80.87 0.53 (3.184 0.021)
16 (8)
20 (10)
24 (12)
26 (13)
34 (17)
36 (18)
40 (20)
50 (25)
60 (30)
64 (32)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
125
IDC Systems
Flat Ribbon Cables
.050" PITCH
S
S
C
OLOR
ERIES 201 – 28 AWG (7/36) STRANDED
ERIES 202 – 26 AWG SOLID
C
ODED
F
LAT
C
ABLE
LL53375
E41651
P
HYSICAL
P
ROPERTIES
201
PVC
202
PVC
I
NSULATION MATERIAL
:
C
C
ONDUCTORS
ONDUCTOR
:
S
28 AWG, Stranded
1.27 (.050)
26 AWG, Solid
PACING MM (IN):
E
LECTRICAL PROPERTIES
V
OLTAGE RATING
NSULATION RESISTANCE
MPEDANCE
APACITANCE @ 1 MH
NDUCTANCE @ 1 MH
ROPOGATION DELAY
:
300V rms
>10 Ohms
100 Ohms
(14.0 pF/ft.)
(.14 µH/ft.)
(1.38 nSec/ft.)
300V rms
>10 Ohms
103 Ohms
(13.5 pF/ft.)
(.14 µH/ft.)
(1.38 nSec/ft.)
10
10
I
I
:
:
C
Z
:
I
Z
:
P
:
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE RATING
:
105˚ C
105˚ C
T
YPICAL
CROSSTALK CHARACTERISTICS: 10FT Sample, 1 line driven, 1 line sensed
Test Method
G-S-G
3.0
5.0
G-G-S-G-G
Rise Time nSec
Near End (%)
Far End (%)
7.0
3.2
2.7
6.7
UL Style No. 20067
UL94VW-1 COMPLIANT
Ordering Information
NUMBER
OF
SERIES 201
28 GAUGE
STRANDED
SERIES 202
26 GAUGE
SOLID
DIMENSIONS IN MM (INCHES)
WIRE COLOR SEQUENCE
(REPEAT CONDUCTOR NUMBERS)
CONDUCTORS
A
B
CONDUCTOR
COLOR
9
201-9
201-10
201-14
201-15
201-16
201-20
201-24
201-25
201-26
201-34
201-36
201-37
201-40
201-44
201-50
201-56
201-60
201-64
–
11.43 (.450)
12.70 (.500)
17.78 (.700)
19.05 (.750)
20.32 (.800)
25.40 (1.000)
30.48 (1.200)
31.75 (1.250)
33.02 (1.300)
43.18 (1.700)
45.72 (1.800)
46.99 (1.850)
50.80 (2.000)
55.88 (2.200)
63.50 (2.500)
71.12 (2.800)
76.20 (3.000)
81.28 (3.200)
10.16 (.400)
11.43 (.450)
16.51 (.650)
17.78 (.700)
19.05 (.750)
24.13 (.950)
29.21 (1.150
30.48 (1.200)
31.75 (1.250)
41.91 (1.650)
44.45 (1.750)
45.72 (1.800)
49.53 (1.950)
54.61 (2.150
62.23 (2.450i
69.85 (2.750)
74.93 (2.950
80.01 (3.150)
NUMBER
10
14
15
16
20
24
25
26
34
36
37
40
44
50
56
60
64
–
202-14
–
1
2
Brown
Red
3
Orange
Yellow
Green
Blue
4
–
5
202-24
6
–
–
7
Violet
Gray
8
9
White
Black
202-36
10
–
–
–
202-50
–
–
NOTES: Unless otherwise specified:
1. 202-XX to be used with micro-ribbon connectors, catalog numbers 622-XXM, F
or FA. Consult factory for use with other connectors.
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
126
IDC Systems
Flat Ribbon Cables
.050" PITCH
S
S
R
OUND-T
O
-FLAT
C
ABLE
ERIES 300 – 28 AWG (7/36) STRANDED—SHIELDED
ERIES 301 – 28 AWG (7/36) STRANDED—NON-SHIELDED
LL53375
E41651
P
HYSICAL ROPERTIES
P
300
PVC
301
PVC
I
NSULATION MATERIAL
:
C
C
ONDUCTORS
ONDUCTOR
:
S
28 AWG, Stranded—Shielded
1.27 (.050)
28 AWG, Stranded—Non-Shielded
PACING MM (IN):
E
LECTRICAL PROPERTIES
V
OLTAGE RATING
:
300V rms
300V rms
I
MPEDANCE
:
57 Ohms
63 Ohms
C
APACITANCE @ 1 MH
Z
:
92.2 pF/m (36.3 pF/ft.)
.30 µH/m (.120 µH/ft.)
4.5 nSec/m (1.79 nSec/ft.)
80.5 pF/m (31.7 pF/ft.)
.33 µH/m (.129 µH/ft.)
4.4 nSec/m (1.73 nSec/ft.)
2.25"
I
NDUCTANCE @ 1 MH
Z
:
P
ROPOGATION DELAY
:
D
ISTANCE ETWEEN LAT SECTIONS: 2.25"
B
F
E
NVIRONMENTAL
P
ROPERTIES
T
EMPERATURE RATING
:
80˚ C
80˚ C
P
ACKAGING
TANDARD: Splice free 100 foot rolls with UL/CSA markings on reels
PTIONAL: Other roll quantities and labeling options available. See page 129 for details.
S
O
UL Style No. 20267
UL94VW-1 COMPLIANT
F
EATURES
• PVC jacket prevents damage in external
applications
• Round cross-section allows maximum system
airflow
• Shielding braid provides EMI / RFI protection
• Alternating flat and slit sections along cable length allow mass termination of
IDC connector without the need for lamination or lacing equipment
Ordering Information
NO. OF
CONDUCTORS
SHIELDED
CABLE
DIMENSIONS IN MM (INCHES)
B
NON-SHIELDED
CABLE
DIMENSIONS IN MM (INCHES)
A
C
A
B
C
9
300-09
300-10
300-14
300-15
300-16
300-20
300-24
300-25
300-26
300-30
300-34
300-36
300-37
300-40
300-50
300-60
300-64
7.0 (0.27)
7.0 (0.27)
7.5 (0.29)
7.5 (0.29)
8.4 (0.33)
8.5 (0.33)
9.2 (0.36)
9.2 (0.36)
9.8 (0.39)
9.8 (0.39)
10.5 (0.41)
10.6 (0.42)
10.6 (0.42)
11.3 (0.44)
11.6 (0.45)
13.0 (0.51)
13.5 (0.53)
11.43 (0.45)
12.70 (0.50)
17.78 (0.70)
19.05 (0.75)
20.30 (0.80)
25.40 (1.00)
30.48 (1.20)
31.75 (1.25)
33.02 (1.30)
38.10 (1.50)
43.20 (1.70)
45.72 (1.80)
47.00 (1.85)
50.80 (2.00)
63.50 (2.50)
76.20 (3.00)
81.30 (3.20)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
1.0 (0.04)
1.0 (0.04)
1.0 (0.04)
1.0 (0.04)
1.0 (0.04)
301-09
301-10
301-14
301-15
301-16
301-20
301-24
301-25
301-26
301-30
301-34
301-36
301-37
301-40
301-50
301-60
301-64
6.5 (0.26)
6.5 (0.26)
7.0 (0.28)
7.0 (0.28)
7.9 (0.31)
8.0 (0.31)
7.7 (0.30)
7.7 (0.30)
9.3 (0.37)
9.3 (0.37)
10.0 (0.39)
10.1 (0.40)
10 .1 (0.40)
10.8 (0.43)
11.1 (0.44)
12.5 (0.49)
13.0 (0.51)
11.43 (0.45)
12.70 (0.50)
17.78 (0.70)
19.05 (0.75)
20.30 (0.80)
25.40 (1.00)
30.48 (1.20)
31.75 (1.25)
33.02 (1.30)
38.10 (l.50)
43.20 (1.70)
45.72 (1.80)
47.00 (1.85)
50.80 (2.00)
63.50 (2.50)
76.20 (3.00)
81.30 (3.20)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
0.8 (0.03)
1.0 (0.04)
1.0 (0.04)
1.0 (0.04)
1.0 (0.04)
10
14
15
16
20
24
25
26
30
34
36
37
40
50
60
64
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
127
IDC Systems
Mass Termination
P
REPARED (VALVE
A
DDED
)
.050" PITCH
R
OUND
-TO-FLAT
CABLE
SERIES 203 – 28 AWG (7/36) STRANDED—NON-TWISTED PAIR
SERIES 204 – 28 AWG (7/36) STRANDED—TWISTED
PAIR
20X - XX - XX00 - X
3 – Non-Twisted
4 – Twisted Pair
LL53375
E41651
1 – Shielded
2 – Unshielded
UL94VW-1 COMPLIANT
# of Conductors
(See Below)
Length In Whole Inches
UL Style No. 2517
*Length In Feet
02 – 2 ft long
05 – 5 ft long
10 – 10 ft long
“Spread Pitch Lamination”
PITCH TYP. ACCUMULATION OF PITCH TOLERANCE BETWEEN
CONDUCTORS IN ENTIRE CABLE MAY NOT EXCEED
TOLERANCE OF DIMENSION Pn.
S
ERIES 203
N
ON-TWISTED
ROUND-T
O-FLAT
CABLE
“A”
POSITIONS
(PAIRS)
DIMENSIONS
DIAMETER
.190
.245
.250
.255
.275
.290
.295
.300
.330
.335
.340
.345
.385
.440
Pn
W
S
ERIES 204
9
10.16 (0.40)
16.51 (0.65)
17.78 (0.70)
19.05 (0.75)
24.13 (0.95)
29.21 (1.15)
30.48 (1.20)
31.75 (1.25)
41.91 (1.65)
44.45 (1.75)
46.74 (1.80)
49.53 (1.95)
62.23 (2.45)
80.01 (3.15)
11.02 (.434)
17.37 (.684)
18.64 (.734)
19.91 (.784)
24.99 (.984)
30.07 (1.18)
31.34 (1.23)
32.61 (1.28)
42.77 (1.68)
45.31 (1.78)
46.58 (1.83)
47.85 (1.88)
63.09 (2.48)
T
WISTED
PAIR
R
OUND-T
O
-FLAT
C
ABLE
14
15
16
20
24
25
26
34
36
37
40
50
64
“A”
POSITIONS
(PAIRS)
DIMENSIONS
DIAMETER
.225
.280
.290
.315
.320
.330
.365
.370
.375
.425
.480
Pn
W
10
14
16
20
24
26
34
36
40
50
64
11.43 (0.45)
16.51 (0.65)
19.05 (0.75)
24.13 (0.95)
29.21 (1.15)
31.75 (1.25)
41.91 (1.65)
44.45 (1.75)
49.53 (1.95)
62.23 (2.45)
80.01 (3.15)
12.29 (.484)
17.37 (.684)
19.91 (.784)
24.99 (.984)
30.07 (1.18)
32.61 (1.28)
42.77 (1.68)
45.31 (1.78)
47.85 (1.88)
63.09 (2.48)
81.28 (3.20)
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
Dimensions shown are for reference only. Dimensions are in millimeters (inches).
128
IDC Systems
Mass Termination
OPTIONAL
PACKAGING AND
LABELING FOR T&B FLAT
CABLE
Reel Length:
Blank—100 Foot
300—300 Foot
Reel Style:
Blank—Std. Rolls
TB—Tail Option
AAA - BBB - CCC - DDD - EE
Cable Series
# of Positions
Labeling:
Blank—UL/CSA on reel label only
CSA—UL and CSA marking
continuously marked on cable
Stand
Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312
129
相关型号：
©2020 ICPDF网 联系我们和版权申明