5916G15-BK [ETC]
Powerpole Connectors PP75 up to 120 Amps;型号: | 5916G15-BK |
厂家: | ETC |
描述: | Powerpole Connectors PP75 up to 120 Amps |
文件: | 总8页 (文件大小:1081K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Powerpole® Connectors
- PP75: up to 120 Amps
PP75 series Powerpole® housings can be used for wire-to-wire,
wire-to-board, and wire-to-busbar applications. Wire sizes
from #16 AWG (1.3 mm²) to #6 (13.3 mm²) offer power
capabilities up to 120 amps per pole. Locking housings offer
the capability to secure Powerpole® housings to each other
and to mounting pads. Housings made from chemical
resistant (CR) resin withstand industrial solvents better than
standard housings.
PP75 with
Mounting Wings
• Large Wire Range Accommodates up to #6 (10mm²) Wire
Reducing bushings allow as small as #16 (1.5 mm²) wire to be used
• Wire, PCB, and Busbar Contacts
Allows one connection system to meet multiple needs
• Mini-Powerclaw PCB Contacts Minimize PCB Footprint
Removes the PP75 housing from the board side
| PP75 ORDERING INFORMATION |
PP75 Standard Housings
The second smallest Powerpole® housing can be used with wire contacts
for up to 6 AWG [10mm²] as well as PCB and busbar contacts.
Description
------- Part Numbers --------
Minimum Quantity ... 1,000
100 ......
5916G7
5916G6
5916G4
5916G5
5916
Red
5916G7-BK
[ 15.9 ]
Green
Black
White
Blue
5916G6-BK
5916G4-BK
5916G5-BK
5916-BK
0.62
[ 47.9 ]
1.88
[ 15.9 ]
0.62
[ 17.0 ]
0.67
Yellow
Orange
Gray
5916G15-BK 5916G15
5916G14-BK 5916G14
5916G16-BK 5916G16
[ 81.3 ]
3.20
Front View
Mated Length
PP75 Chemical Resistant (CR) Housings
Has the same form and dimensions of the standard
PP75 housing in a chemical resistant PBT/ PC blend
housing. Suitable for use to -40°C.
V0 = Standard
P = Chemical Resistant
Material ID
Located Here
Description
- Part Numbers -
1,000 .......
P5916G7-BK
P5916G4-BK
P5916G5-BK
P5916-BK
Minimum Quantity ...
Red
Black
White
Blue
All Data Subject To Change Without Notice
www.andersonpower.com
- 30 -
PP75 Locking Dovetail Housings
Offers dovetails for stacking housings that have a locking feature to prevent housings separating.
Can mate to standard and chemical resistant housings, but cannot be stacked with them.
Description
---------- Part Numbers -----------
Minimum Quantity ....
1,000
100 .....
75LOKRED
75LOKGRN
75LOKBLK
75LOKWHT
75LOKBLU
75LOKGRA
Red
75LOKRED-BK
75LOKGRN-BK
75LOKBLK-BK
75LOKWHT-BK
75LOKBLU-BK
75LOKGRA-BK
Green
Black
White
Blue
[ 47.9 ]
1.88
Gray
PP75 Silver Plated Wire Contacts
Silver plated contacts offer the best electrical performance and durability up to 10,000 mating cycles.
See reducing bushings in accessory section for smaller wires.
Dimensions
Mating
Force
Loose Piece
- A -
AWG
mm²
-- Part Numbers --
inches mm
........................
Minimum Quantity ........................ 1,000
100
6
13.3
13.3
8.4
Low
High
High
1307-BK 1307
5900-BK 5900
5952-BK 5952
5953-BK 5953
5915-BK 5915
0.22
0.22
0.19
0.14
0.14
5.59
5.59
4.83
3.56
3.56
[ 11.4 ]
0.45
[ 30.0 ]
1.18
6
8
A
12 to 10
12 to 10
3.3 to 5.3 Low
3.3 to 5.3 High
[ 7.2 ]
0.28
[ 7.1 ]
0.28
PP75 Silver Plated Busbar Contacts
Provide a quick disconnect input or output busbar connection. Busbar contacts are
for mating with wire contacts only. Part number 75BBS includes lock nuts. Locknuts
must be ordered separately for B01956P4.
See Busbar contact drawing on
website for further detail.
[ 17.1 ]
0.68
Mating
Type
Minimum Quantity .................
Busbar #10-24 High
Lock Nut #10-24
Thread Force ------------- Part Numbers --------------
1,000
20
-
10 ...
75BBS
-
[ 2.0 ]
0.08
[ 69.1 ]
B01915P1
H1216P8
-
110G54
2.72
55A Right Angle Standard Powerclaw PCB Contacts
Standard Powerclaw contacts are for use inside a PP75 housing and
provide a color coded right angle connection to the PCB.
Second housing
and contact in two
pole version only.
Description
--- Loose Piece Part Numbers --
500 100 ........
PC5930T
Minimum Quantity .....
[ 5.2 ]
0.20
[ 17.0 ]
0.67
Tin Plated
PC5930T-BK
PC5930S-BK
Silver Plated
PC5930S
[ 22.2 ]
0.87
[ 32.8 ]
1.29
[ 48.0 ]
1.89
[ 66.0 ]
2.60
See PCB contact drawing on
website for further detail.
PP75 Housing
Standard Powerclaw Contact
All Data Subject To Change Without Notice
- 31 -
www.andersonpower.com
55A Right Angle Mini Powerclaw PCB Contacts
Right angle Mini Powerclaw contacts can be used on the PCB edge
without a PP75 housing on the PCB side. A self polarizing design only
allow PP75 wire housings to mate to PCB contacts one way.
[ 8.1 ]
0.32
[ 12.19 ]
0.480
[ 24.6 ]
0.97
[ 58.4 ]
2.30
Loose Piece
[ 15.6 ]
0.61
Description
-------- Part Numbers --------
100 ......
[ 7.6 ]
0.30
Minimum Quantity ... 1,000
[ 25.4 ]
1.00
Tin Plated
PC5934T-BK PC5934T
PC5934S-BK PC5934S
[ 2.42 ]
0.095
[ 6.10 ]
Silver Plated
[ 17.5 ]
0.69
[ 1.27 ]
0.050
0.240
55A Vertical Mini Powerclaw PCB Contacts
Vertical Mini Powerclaw contacts save space by not
requiring a PP75 housing on the PCB side. The guide
housing is required for 2 pole applications to provide a
polarized connection. (See PP75 accessories).
[ 6.25 ]
0.246
[ 12.2 ]
0.48
[ 24.3 ]
0.96
Loose Piece
Description
--------- Part Numbers -------
1,500 100 ......
Minimum Quantity ...
Tin Plated
[ 9.7 ]
0.38
[2.32]
0.091
[ 1.27 ]
0.050
PC5933T-BK PC5933T
PC5933S-BK PC5933S
Silver Plated
[ 4.98 ]
0.196
[ 10.29 ]
0.405
See PCB contact drawing on website for further detail.
| PP75 TEMPERATURE CHARTS |
PP75 Singlepole
Derating vs. Ambient Temperature
PP75 Multipole
Derating vs. Ambient Temperature
Mini Powerclaw
Derating vs. Ambient Temperature
125
125
100
75
125
100
75
100
75
50
50
50
25
25
25
0
10 20 30 40 50 60 70 80 90 100
Amperes Applied
0
20
40
Amperes Applied
6 AWG 8 AWG
10 AWG 12 AWG
60
80
100 120
0
10 20 30 40 50 60 70 80 90 100110
Amperes Applied
6 AWG
10 AWG
8 AWG
12 AWG
Singlepole
2-Pole
Mini Powerclaw
Temperature Rise at Constant Current
PP75 Singlepole Loose Piece Contact
Temperature Rise at Constant Current
PP75 Multipole Loose Piece Contact
Temperature Rise at Constant Current
60
50
40
30
20
10
0
60
50
40
30
20
10
0
60
50
40
30
20
10
0
0
10 20 30 40 50 60 70 80 90
Amperes Applied
0 10 20 30 40 50 60 70 80 90100 110 120
Amperes Applied
0
10 20 30 40 50 60 70 80 90
Amperes Applied
6 AWG
10 AWG
8 AWG
12 AWG
6 AWG
10 AWG
8 AWG
12 AWG
Singlepole
2-Pole
NOTE: Temperature rise charts are based on a 25°C ambient temperature. Powerclaw charts are based on #8 AWG equivalent copper foil on board side, mated to
#6 AWG conductor on wire side.
All Data Subject To Change Without Notice
www.andersonpower.com
- 32 -
| PP75 SPECIFICATIONS |
Electrical
Mechanical
Wire Size Range
Current Rating Amperes¹
Wire to Wire (6 AWG)
Wire to PCB (6-AWG)
Wire to Busbar (6 AWG)
UL 1977
120
CSA
70
AWG
mm²
Wire Contcts with Bushings
16 to 6
1.3 to 13.3
55
50
75
Max. Wire Insulation Diameter
in.
mm
0.437
11.100
Voltage Rating AC/DC
UL 1977
600
Operating Temperature²
Standard
°F
°C
-4° to 221°
-40 to 221°
-20° to 105°
-40° to 105°
PCB Connector Recommended Voltage 3
per IEC 60950-1 Table 2L Pollution Degree 2
Chemical Resistant*
*Chemical resistant material not available for PCB guide housings
Mini Vert. Contact Adjacent Poles
Mini Horiz. Contact Adjacent Poles
Standard Contact Adjacent Poles
220
200
635
Mating Cycles No Load by Plating
Silver (Ag)
Tin (Sn)
Wire and PCB Contacts
10,000
1,500
Dielectric Withstanding Voltage
Avg. Mating / Unmating Force
Wire to Wire Low Force Contacts
Wire to Wire High Force Contacts
Standard Powerclaw to Wire
Mini Powerclaw to Wire
Lbf.
5
N
Volts AC
2,200
22
31
31
17
7
Avg. Mated Contact Resistance Milliohms¹
7
Wire Contact with 1 1/4” of #6 AWG
PCB Contact to Contact
0.200
0.500
4
PCB Specifications
Mounting Style
UL Hot Plug Current Rating Amperes - 250 cycles at 120V DC
Plated Through Hole
Standard: 0.15 [0.381]
Wire- wire
50A
40A
Max PCB Thickness- in. [mm]
PCB- wire (Vertical Mini Powerclaw)
Mini:
0.25 [0.635]
Recommended Traces
#8 AWG Cross Section
Materials
Housing
Min. Contact / Spring Retention Force
Lbf.
N
Standard Plastic Resin
Chem. Resistant Resin
Contact Retention Spring
Polycarbonate
Wire Housing
50
222
Polycarbonate / PBT blend
Stainless Steel
Min. Creepage / Clearance Distance PCB in.
mm
6.6
2.2
2.0
Standard Powerclaw Adjacent Poles
Mini Vert. Powerclaw Adjacent Poles
Mini Horz. Powerclaw Adjacent Poles
0.260
Housing Flammability Rating
0.087
0.079
UL94
V-0
Contact
Protection
Base
Copper Alloy
Silver
Touch Safety with Wire Contacts
Wire Plating
PCB Plating
IEC 60529
IP10
Sn or Ag over Ni
Contact Termination Methods
Crimp4
Wire Contacts
Hand Solder
Wire and PCB Contacts
PCB Contacts
Solder Dip*
Wave Solder*
PCB Contacts
Wrench / Socket
Busbar Contacts
¹ Based on: 105°C rated or better cable of the largest size, Properly calibrated APP® recommended tooling, and a 25°C ambient temperature. UL rating not to exceed
the maximum operating temperature. CSA rating below a 30°C temperature rise.
² Limited by the thermal properties of the connector plastic housing.
³ Without use of spacers to increase creepage and clearance distances.
4 Use APP® recommended tooling only. Alternate tools may adversely affect the performance of our connectors along with UL and CSA recognition.
All Data Subject To Change Without Notice
- 33 -
www.andersonpower.com
| Powerpole® PP75 Accessories |
Strain Relief Grommets
Use for strain relief in the back side of a PP75 housing. Wire gauge given for
reference only, use grommet ID and wire OD to determine suitability in the
end application.
Dimensions
- A -
A
Description
- Part Numbers - inches mm
Minimum Quantity ...
#6 AWG, Black
100
.......................
0.35 8.89
0.25 6.35
0.17 4.32
114411P2
114411P1
114411P3
#8 AWG, Black
#10 - 12 AWG, Black
[ 27.4 ]
1.08
[ 27.4 ]
1.08
Mounting Wing for Standard or CR Housings
Mounting wings can be used to secure dovetailed Powerpole® 75 series housings
by passing fasteners through the wings in either a horizontal or vertical orientation.
Useful for sheet metal panels, printed circuit boards, and many other mounting
surfaces. Fasteners not included.
[ 15.9 ]
[ 15.9 ]
0.63
0.63
[ 15.9 ]
0.63
[ 15.9 ]
0.63
Description
------- Part Numbers -------
1,000 100 ...
1399G20-BK 1399G20
1399G7-BK 1399G7
Minimum Quantity ...
Blue, Round Hole
Blue, Oval Hole
Mounting Wing for Locking Housings
Mounting wings can be used to secure Powerpole® 75 series housings with
locking dovetails by passing fasteners through the wings in either a horizontal or
vertical orientation. Useful for sheet metal panels, printed circuit boards, and
many other mounting surfaces. Fasteners not included.
[ 5.1 ]
Ø 0.20
[ 2.6 ]
R 0.10
[ 15.9 ]
0.63
[ 6.9 ]
0.27
Oval Hole
Round Hole
[ 15.9 ]
0.63
- Mounting Wing Top
- Mounting Wing Top
Description
--------------------- Part Numbers ---------------------
Minimum Quantity ...
Blue, Oval Hole
Blue, Round Hole
1,000
100
...
75LOKWNGBLU-BK
75LOKWNGBLU
[ 5.1 ]
Ø .20
75LOKWNGBLU-R-BK 75LOKWNGBLU-R
[ 27.4 ]
1.08
Left Side View
- Both Versions
Right Side View
- Both Versions
Surface Mount for Locking Housings
Use to secure Powerpole® 75 series housings with locking dovetails to a flat
surface. Useful for sheet metal panels, printed circuit boards, and many other
mounting surfaces. Fasteners not included.
[ 2.8 ]
0.11
[ 15.7 ]
0.62
[ 43.2 ]
1.70
[ 4.9 ]
0.19
Description
Minimum Quantity ...
Blue
----------------- Part Numbers ----------------
1,000 100 ...
75LOKSMTBLU-BK 75LOKSMTBLU
[ 7.9 ]
0.31
[ 3.6 ]
0.14
Top View
Side View
NEW
Spacer
Use to separate housings under high power to minimize power capability derating
due to heat rise. They are recommended for squaring off a block of Powerpole® 75
housings to enable mounting accessories or retaining pins to be used. Combining
long and short spacers opposite each other in a mated block adds keying features,
or use two short spacers to avoid interference.
[ 17.0 ]
0.67
[ 17.0 ]
0.67
Description
------------- Part Numbers -------------
[ 33.3]
1.31
[ 47.6 ]
1.87
Minimum Quantity…
Red, Short
1000
100 ....
..........
..........
.......... Available Soon
.......... Available Soon
Short
Long
Red, Long
All Data Subject To Change Without Notice
www.andersonpower.com
- 34 -
Guide Housings for Vertical Mini Powerclaw Contacts
Prevents polarity being reversed when a two pole PP75 block is mated to
vertical mini Powerclaw contacts. Fastening hardware not included.
Description
----------- Part Numbers ------------
Minimum Quantity ...
1,000
100 ...
PP75 Connector
Black Guide Housing PC-HSG-PP-BK
PC-HSG-PP
Mini Vertical
Powerclaw Contact
Guide Housing
PCB
Mounting Clamp
Mounting clamps can be used for fastening a block of Powerpole® 75 series
housings to a panel. Connector blocks must be a complete square for the
clamps to work properly. Fastening hardware not included.
Description
-- Part Numbers --
Minimum Quantity ... 50 sets of 2 ...
2 or 4 Pole
3 or 6 Pole
1463G1
1463G2
Mounting Clamp
Panel
2 Pole
3 Pole
Retaining Pins
Retaining pins are used to keep stacked Powerpole® 75 series housings from separating.
Retaining pins are inserted in the circular opening between two housings stacked side by side.
Dimension B is +/- 0.015 in or 0.38 mm.
Dimensions
- A -
- B -
Description
------ Part Numbers ------
inches
mm
inches mm
Minimum Quantity ...
1 Block High
1,000
100
................................................................................
111812P7
111812P6
110G19
110G18
0.196 / 0.207 4.98 / 5.26
0.196 / 0.207 4.98 / 5.26
0.560 14.220
1.000 25.400
2 Block High
B
PCB Mounting Staples
Reduce strain on solder joints during mating and unmating. Staples bend over the underside
A
of the PCB board to lock the housings in place. Staples are an interference fit with housings.
Number of
Stacked Powerpoles®
Staple
---- Part Numbers ---- H x W
Housings
PCB
Minimum Quantity ..... 100 .......................
PCSTAPLE-1
PCSTAPLE-2
1 x 1
1 x 2
Fasten the staple by
bending the leads on the
bottom of the board.
Slide staple over housings and
into the holes in the board.
Reducing Bushings
Use with contact part number 5900-BK or 1307-BK to allow a smaller wire to
be used with the connector. Electrical capability is derated with smaller wire.
Dimensions
- Length -
Inches mm
100 ........................................................
- ID -
------------------ Part Numbers ------------ inches mm
Minimum Quantity .................................................... 3,000 1,000
5912-BK 5912 0.18
Contact Barrel Size
Wire Size
ID
Length
#6 AWG [13.3 mm²]
#6 AWG [13.3 mm²]
#6 AWG [13.3 mm²]
#8 AWG [8.4 mm²]
-
4.57
3.56
2.29
0.45
0.47
0.47
11.43
11.94
11.94
#12- 10 AWG [3.3- 5.3 mm²] 5910-BK
#16- 14 AWG [1.3- 2.1 mm²] 5913-BK
-
-
5910 0.14
5913 0.09
Wire Entrance
For environmentally sealed connector shells to hold Powerpole®
15-180 connectors, see APP®’s SPEC Pak® product series on our
website, www.andersonpower.com
All Data Subject To Change Without Notice
15350 DS-PP75 REV C3.1
- 35 -
www.andersonpower.com
Powerpole®
- Tooling Information
Wire Size
Loose Piece Part Numbers
Loose Piece Contact Crimp Tool
Pneumatic
Reeled Part Numbers Reeled Contact Crimp Tools
Air Feed
Kit*
ATS
Tin
Silver
Hand
Tool
Bench
Tool
Number
Locator of Crimps
+
Tin
Silver
ATS
Press
AWG
mm²
Plating
Plating
Plating
Plating
Applicator
Die
+
or
PP15 / 45 Flat Wiping Power & Ground
16 / 20 1.3 / 0.52
N/A
N/A
1332
1331
1367G1
N/A
N/A
N/A
N/A
N/A
12 / 16
3.3 / 1.3
1309G2
262G1
200G2L
269G2
261G1
261G2
269G1
269G3
200G1L
201G1H
1830G1
262G2
1385519-1
TBD
16 / 20 1.3 / 0.52 262G1-LPBK 262G2-LPBK
16 / 20 1.5 / 0.52 200G2L-LPBK 200G4L-LPBK
or
1309G8
200G4L
1.3 / 0.52
1385519-1
1385520-1
1385458-1
1385520-1
1385458-1
1385460-1
1385460-1
1385460-1
16 / 20
269G2-LPBK
N/A
N/A
261G4
261G3
N/A
12 / 16 3.3 / 1.3 261G1-LPBK 261G4-LPBK
10 / 14 5.3 / 2.1 261G2-LPBK 261G3-LPBK
N/A
N/A
Single
N/A
1725900-2 1424266-1
or or
[3-54500-1] [354578-1]
1309G3
or
1309G8
12 / 16 3.3 / 1.3 269G1-LPBK
10 / 14 5.3 / 2.1 269G3-LPBK
N/A
N/A
N/A
200G3L
201G3H
1830G2
10 / 14 6.0 / 2.1 200G1L-LPBK 200G3L-LPBK
10 / 14 6.0 / 2.1 201G1H-LPBK 201G3H-LPBK
10 / 14 6.0 / 2.1 1830G1-LPBK 1830G2-LPBK
1309G6
or
1309G8
PP75
1307
#6
#8
13.3
8.4
1388G6
1388G7
265G5
265G6
1385523-1 2-565435-2 692655-1
1725900-2 1424266-1
5900
5952
5953
5915
N/A
1309G4
1387G1
1389G6
Single
N/A
#10 / 12 5.3 / 3.3
1385522-1
or
or
[3-54500-1] [354578-1]
PP120
1/0
#1
#2
#4
#6
53.5
42.4
33.6
21.2
13.3
1323G2
1323G1
1319
1388G3
1388G4
N/A
1368
1387G1
1387G2
1389G4
Single
N/A
N/A
1319G4
1319G6
PP180
3/0
2/0
85
1328G2
1328G1
1303G12
1303G13
1304G32
Double
Single
53.5
1/0
53.5
1382
N/A
1368
1387G1 1388G3 1389G3
N/A
N/A
#1
#2
42.4
33.6
1347
1383
1387G2 1303G13 1304G32
1387G1 1388G3 1389G3
1387G2 1303G13 1304G32
1387G1 1388G4 1389G3
Double
Single
Double
Single
#4
#6
21.1
13.3
1384
1348
* All ATS applicators for APP® contacts are air feed style, (except 1385870) and require the press to have an air feed kit installed.
NOTE: See website for the most current information.
All Data Subject To Change Without Notice
- 43 -
www.andersonpower.com
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Anderson Power Products:
1307 265G1 265G2 265G3 265G4 265G5 265G6 265G7 265G8 5900 5900-BK 5910 5912 5913 5913-BK
5915 5915-BK 5952 5952-BK 5953 75BBS 903G1 904G1 1463G1 1463G2
相关型号:
©2020 ICPDF网 联系我们和版权申明