74VHCT373AMX [ETC]
8-Bit D-Type Latch ; 8位D类锁存器\n型号: | 74VHCT373AMX |
厂家: | ETC |
描述: | 8-Bit D-Type Latch
|
文件: | 总7页 (文件大小:94K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
July 1997
Revised April 1999
74VHCT373A
Octal D-Type Latch with 3-STATE Outputs
5V systems and two supply systems such as battery back
up. This circuit prevents device destruction due to mis-
matched supply and input voltages.
General Description
The VHCT373A is an advanced high speed CMOS octal D-
type latch with 3-STATE output fabricated with silicon gate
CMOS technology. It achieves the high speed operation
similar to equivalent Bipolar Schottky TTL while maintain-
ing the CMOS low power dissipation. This 8-bit D-type
latch is controlled by a latch enable input (LE) and an out-
put enable input (OE). The latches appear transparent to
data when latch enable (LE) is HIGH. When LE is LOW, the
data that meets the setup time is latched. When the OE
input is HIGH, the eight outputs are in a high impedance
state.
Note 1: Outputs in OFF-State.
Features
■ High speed: tPD = 7.7 ns (typ) at TA = 25°C
■ High Noise Immunity: VIH = 2.0V, VIL = 0.8V
■ Power Down Protection is provided on all inputs and
outputs
■ Low Power Dissipation:
Protection circuits ensure that 0V to 7V can be applied to
the input and output (Note 1) pins without regard to the
supply voltage. This device can be used to interface 3V to
I
CC = 4 µA (max) @ TA = 25°C
■ Pin and Function Compatible with 74HCT373
Ordering Code:
Order Number
74VHCT373AM
74VHCT373ASJ
74VHCT373AMTC
74VHCT373AN
Package Number
M20B
Package Description
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
M20D
MTC20
N20A
Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter “X” to the ordering code
Logic Symbol
Connection Diagram
IEEE/IEC
Pin Descriptions
Pin Names
D0–D7
LE
Description
Data Inputs
Latch Enable Input
Output Enable Input
3-STATE Outputs
OE
O0–O7
© 1999 Fairchild Semiconductor Corporation
DS500027.prf
www.fairchildsemi.com
Functional Description
Truth Table
The VHCT373A contains eight D-type latches with 3-
STATE standard outputs. When the Latch Enable (LE)
input is HIGH, data on the Dn inputs enters the latches. In
Inputs
OE
Outputs
On
LE
Dn
this condition the latches are transparent, i.e., a latch out-
put will change state each time its D input changes. When
LE is LOW, the latches store the information that was
present on the D inputs a setup time preceding the HIGH-
to-LOW transition of LE. The 3-STATE standard outputs
are controlled by the Output Enable (OE) input. When OE
is LOW, the standard outputs are in the 2-state mode.
When OE is HIGH, the standard outputs are in the high
impedance mode but this does not interfere with entering
new data into the latches.
X
H
H
L
H
L
L
L
X
L
Z
L
H
X
H
O0
H = HIGH Voltage Level
L = LOW Voltage Level
Z = High Impedance
X = Immaterial
O
= Previous O before HIGH-to-LOW transition of Latch Enable
0
0
Logic Diagram
Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.
www.fairchildsemi.com
2
Absolute Maximum Ratings(Note 2)
Recommended Operating
Conditions (Note 6)
Supply Voltage (VCC
)
−0.5V to + 7.0V
−0.5V to + 7.0V
DC Input Voltage (VIN
)
Supply Voltage (VCC
)
4.5V to + 5.5V
0V to + 5.5V
DC Output Voltage (VOUT
)
Input Voltage (VIN
)
(Note 3)
−0.5V to VCC + 0.5V
−0.5V to +7.0V
−20 mA
Output Voltage (VOUT
)
(Note 4)
(Note 3)
0V to VCC
0V to 5.5V
Input Diode Current (IIK
)
(Note 4)
Output Diode Current (IOK
(Note 5)
)
Operating Temperature (TOPR
Input Rise and Fall Time (tr, tf)
CC = 5.0 ± 0.5V
)
−40°C to +85°C
±20 mA
±25 mA
DC Output Current (IOUT
)
V
0 ns/V 20 ns/V
Note 2: Absolute Maximum Ratings are values beyond which the device
may be damaged or have its useful life impaired. The databook specifica-
tions should be met, without exception, to ensure that the system design is
reliable over its power supply, temperature, and output/input loading vari-
ables. Fairchild does not recommend operation outside databook specifica-
tions.
DC VCC/GND Current (ICC
)
±75 mA
Storage Temperature (TSTG
Lead Temperature (TL)
(Soldering, 10 seconds)
)
−65°C to +150°C
260°C
Note 3: HIGH or LOW state.
I
absolute maximum rating must be
OUT
observed.
Note 4: When outputs are in OFF-State or when V = OV.
CC
Note 5: V
< GND, V
> V (Outputs Active).
OUT CC
OUT
Note 6: Unused inputs must be held HIGH or LOW. They may not float.
DC Electrical Characteristics
T
= +25°C
T = −40°C to +85°C
A
V
(V)
A
CC
Symbol
Parameter
Units
Conditions
Min
2.0
2.0
Typ
Max
Min
Max
V
V
V
V
HIGH Level
4.5
5.5
4.5
5.5
4.5
4.5
4.5
4.5
2.0
2.0
IH
V
V
Input Voltage
LOW Level
0.8
0.8
0.8
0.8
IL
Input Voltage
HIGH Level
4.40
3.94
4.50
0.0
4.40
3.80
V
V
V
V
V
V
= V
I
OH
= −50 µA
= −8 mA
= 50 µA
= 8 mA
OH
OL
IN
IH
Output Voltage
LOW Level
or V
I
IL OH
0.1
0.1
= V
I
OL
IN
IH
Output Voltage
3-STATE Output
OFF-State Current
Input Leakage Current
Quiescent Supply Current
0.36
0.44
or V
I
IL OL
I
V
V
V
V
V
= V or V
IH IL
OZ
IN
5.5
±0.25
±2.5
µA
= V or GND
OUT
CC
I
I
I
0 − 5.5
±0.1
±1.0
µA
µA
= 5.5V or GND
IN
IN
IN
IN
5.5
4.0
40.0
= V or GND
CC
CCT
CC
Maximum I /Input
CC
= 3.4V
5.5
0.0
1.35
1.50
mA
Other Inputs = V or GND
CC
I
Output Leakage Current
(Power Down State)
+0.5
+0.5
µA
V
= 5.5V
OFF
OUT
Noise Characteristics
T
= +25°C
V
(V)
A
CC
Symbol
Parameter
Units
Conditions
Typ
Limits
V
Quiet Output Maximum Dynamic V
5.0
5.0
5.0
5.0
1.2
1.6
−1.6
2.0
V
V
V
V
C
C
C
C
= 50 pF
= 50 pF
= 50 pF
= 50 pF
OLP
OL
L
L
L
L
(Note 7)
V
Quiet Output Minimum Dynamic V
−1.2
OLV
OL
(Note 7)
V
Minimum HIGH Level Dynamic Input Voltage
Maximum LOW Level Dynamic Input Voltage
IHD
(Note 7)
V
0.8
ILD
(Note 7)
Note 7: Parameter guaranteed by design.
3
www.fairchildsemi.com
AC Electrical Characteristics
T
= +25°C
T = −40°C to +85°C
A
V
(V)
A
CC
Symbol
Parameter
Units
ns
Conditions
Min
Typ
7.7
8.5
5.1
5.9
6.3
7.1
8.8
Max
12.3
13.3
8.5
Min
Max
13.5
14.5
9.5
t
Propagation Delay Time
1.0
1.0
1.0
1.0
1.0
1.0
1.0
C
C
C
C
C
C
C
= 15 pF
= 50 pF
= 15 pF
= 50 pF
= 15 pF
= 50 pF
= 50 pF
PLH
L
L
L
L
L
L
L
5.0 ± 0.5
t
(LE to O )
n
PHL
t
Propagation Delay Time
PLH
5.0 ± 0.5
5.0 ± 0.5
ns
t
(D to O )
n
9.5
10.5
12.5
13.5
12.0
PHL
t
3-STATE Output Enable Time
10.9
11.9
11.2
R
R
= 1 kΩ
= 1 kΩ
PZL
L
ns
t
PZH
t
3-STATE Output Disable Time 5.0 ± 0.5
PLZ
L
ns
t
PHZ
t
Output to Output Skew
5.0 ± 0.5
1.0
10
1.0
10
(Note 8)
OSLH
t
OSHL
C
Input Capacitance
4
6
pF
pF
V
V
= Open
IN
CC
CC
C
C
Output Capacitance
= 5.0V
OUT
PD
Power Dissipation Capacitance
25
pF (Note 9)
Note 8: Parameter guaranteed by design. t
= |t
max − t
|; t
= |t
− t
|
OSLH
PLH
PLH min
OSHL
PHL max
PHL min
Note 9: C is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average
PD
operating current can be obtained by the equation: I (opr.) = C • V • f + I /8 (per F/F).
CC
PD
CC
IN
CC
AC Operating Requirements
T
= +25°C
T = −40°C to +85°C
A
V
(V)
A
CC
Symbol
Parameter
Units
Min
6.5
1.5
3.5
Typ
Max
Min
8.5
Max
t
t
t
(H)
Minimum Pulse Width (LE)
Minimum Set-Up Time
Minimum Hold Time
5.0 ± 0.5
5.0 ± 0.5
5.0 ± 0.5
ns
ns
ns
W
S
1.5
3.5
H
www.fairchildsemi.com
4
Physical Dimensions inches (millimeters) unless otherwise noted
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide
Package Number M20B
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M20D
5
www.fairchildsemi.com
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC20
www.fairchildsemi.com
6
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Package Number N20A
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be rea-
sonably expected to result in a significant injury to the
user.
2. A critical component in any component of a life support
device or system whose failure to perform can be rea-
sonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.
相关型号:
74VHCT373AMX_NL
Bus Driver, AHCT/VHCT Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20, 0.300 INCH, LEAD FREE, MS-013, SOIC-20
FAIRCHILD
74VHCT373M
IC AHCT/VHCT SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20, PLASTIC, SOIC-20, Bus Driver/Transceiver
NSC
74VHCT373M
Bus Driver, AHCT/VHCT Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20, PLASTIC, SOIC-20
FAIRCHILD
74VHCT373MSCX
IC AHCT/VHCT SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20, EIAJ TYPE1, PLASTIC, SSOP-20, Bus Driver/Transceiver
NSC
74VHCT373MTC
IC AHCT/VHCT SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20, PLASTIC, TSSOP-20, Bus Driver/Transceiver
NSC
74VHCT373MTC
Bus Driver, AHCT/VHCT Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20, PLASTIC, TSSOP-20
FAIRCHILD
©2020 ICPDF网 联系我们和版权申明