79102ST-6 [ETC]
Embedded SIP high output (SIMPLE module) ; 嵌入式SIP高输出(简单的模块)\n型号: | 79102ST-6 |
厂家: | ETC |
描述: | Embedded SIP high output (SIMPLE module)
|
文件: | 总3页 (文件大小:191K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
POWERLINE MODULES
SIMPLE™ Embedded PowerPacket™ Modules
FEATURES
•
•
•
First all-in-one HomePlug™ 1.0 embedded
modules based on Intellon’s advanced
INT51X1 single-chip powerline solution
Integrates all components necessary to add
HomePlug functionality to any embedded
system at industry’s lowest cost
Compact vertical or right-angle mounting
configuration using Intellon’s SIMPLE
PowerBus™ connector
Part Number
Description
Right Angle Mount
Designed for systems with embedded power supply
and no external electrical cord (wall adapters).
•
•
•
•
Minimum footprint
79102RA-0
Design optimized for excellent performance
HomePlug 1.0 compliant
Vertical Mount
Optimized to drive the Powerpacket signal through
most AC or DC 6-foot electrical cords, directly to the
power outlet or external AC/DC adapter.
79102ST-6
Simplifies development cycle, assembly
and test
Right Angle Mount
Optimized to drive the Powerpacket signal through
most AC or DC 6-foot electrical cords, directly to the
power outlet or external AC/DC adapter.
79102RA-6
79102ST-0
Vertical Mount
Designed for systems with embedded power supply
and no external electrical cord (wall adapters).
BENEFITS
Bel’s series of embedded PowerPacket modules are the first members of the Single Inline Module – Power Line Enabled
(SIMPLE) family. These modules are specifically designed to allow future Intellon ICs to be used without board redesign. As
new baseband/AFE ICs are introduced by Intellon, pin and function compatible SIMPLE modules can be used to provide
improved functionality and/or reduced cost without requiring any redesign of products using SIMPLE modules.
Based on the industry leading Intellon single-chip PowerPacket transceiver, these modules integrate most of the components
required in a HomePlug solution on a tiny single in-line package. This package can be easily connected into any existing
embedded system via the proprietary SIMPLE PowerBus™ header instantly adding HomePlug functionality with virtually no
PCB space and without the hassle of a system redesign.
Each module integrates the chip, crystal, EEPROM, discrete filters, TX/RX power amplifiers and regulators into one single
device. The only external components required are the PLC coupler and transient protection on the AC side of the main
power supply. The host interface for any of the modules can be configured to be MII PHY, GPSI PHY or MII Host/DTE.
The modules are truly the industry’s most integrated and cost effective way of adding HomePlug 1.0 functionality to any
embedded networking or consumer electronics product.
In Partnership with
©2003 Bel Fuse Inc. Specifications subject to change without notice. 12.10.03
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
POWERLINE MODULES
SIMPLE™ Embedded PowerPacket™ Modules
BLOCK DIAGRAM
ꢰꢯꢫꢂꢈꢬꢑꢓ
ꢰꢭꢫꢭꢈꢬꢑꢓ
ꢭꢫꢭꢬꢈꢒꢡꢦꢊꢞꢮ
ꢭꢫꢭꢬꢈꢑꢆꢮꢆꢇꢦꢊ
ꢃꢫꢂꢬ
ꢭꢫꢭꢬꢈꢘꢋꢮꢍ
ꢉꢆꢊꢇꢋꢌ
ꢯꢫꢂꢈꢬ
ꢉꢆꢊꢇꢋꢌ
ꢯꢫꢂꢬꢈꢒꢡꢦꢊꢞꢮ
ꢈꢥꢞꢤꢇ
�ꢡꢇꢋꢌꢐꢦꢙꢋꢧ
ꢨ��ꢈꢜꢥꢩꢈꢞꢌ
ꢨ��ꢈꢥꢞꢤꢇꢍ
ꢑꢁꢢꢈꢕꢃꢪꢗ
ꢑꢒꢓꢈꢔꢏꢇ
ꢕꢖꢗ
ꢄꢅꢆꢇꢈꢉꢆꢊꢇꢋꢌꢍ
ꢎꢏꢐꢐꢋꢌ
ꢁꢄꢈꢔꢏꢇ
ꢕꢖꢗ
ꢁꢄꢢꢀ
ꢜꢝ
ꢓꢞꢏꢟꢊꢋꢌꢠ
�ꢀꢁꢂꢃꢄꢃ
ꢓꢞꢡꢐꢆꢮꢈꢕꢯꢗ
ꢘꢋꢤꢋꢇ
ꢒꢓꢈꢝꢆꢡꢋ
ꢘꢄꢈ�ꢡ
ꢕꢖꢗ
ꢒꢑꢓꢈ�ꢡ
ꢕꢖꢗ
ꢘꢋꢙꢋꢆꢚꢋ
ꢒꢛꢓꢍꢉꢆꢊꢇꢋꢌ
ꢝꢢꢑꢣꢤꢈꢕꢖꢗ
ꢠꢒꢊꢤꢞꢈꢦꢚꢦꢆꢊꢦꢳꢊꢋꢈꢐꢌꢞꢅꢈꢎꢋꢊꢫ
ꢜꢊꢋꢦꢤꢋꢈꢙꢞꢡꢇꢦꢙꢇꢈꢐꢦꢙꢇꢞꢌꢴꢈ
ꢐꢞꢌꢈꢵꢋꢇꢦꢆꢊꢤꢫ
ꢒꢛꢓꢈꢓꢞꢡꢇꢌꢞꢊꢈꢕꢪꢗ
ꢃꢱꢱ
ꢨꢥꢲ
ꢄꢇꢦꢊ
ꢓꢞꢡꢐꢆꢮ
ꢢꢢ
�ꢀꢁꢂꢃꢄꢄꢅꢄꢆꢇꢈꢉꢊꢋꢌ
MECHANICAL - Vertical Mount
Side View
0.328
Front View
2.756 [70.00]
[8.33]
U102
U3
U1
U2
0.669
[17.00]
Y100
U100
0.799
[20.30]
U101
0.100
[2.54]
P1
0.100
[2.54]
0.050
[1.27]
0.018 [0.46] SQ.
1.950 [49.53]
0.081
[2.06]
Host PCB and Connector
©2003 Bel Fuse Inc. Specifications subject to change without notice. 12.10.03
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
POWERLINE MODULES
SIMPLE™ Embedded PowerPacket™ Modules
MECHANICAL - Right Angle Mount
Front View
Side View
0.063 [1.60]
min clearance
2.756 [70.00]
U102
U3
U1
U2
0.669
[17.00]
U100
U101
Y100
P1
0.200
[5.08]
Bottom View
0.378 [9.60]
0.100
[2.54]
0.050
[1.27]
0.018
[0.46] SQ.
1.950 [49.53]
Host PCB and Connector
©2003 Bel Fuse Inc. Specifications subject to change without notice. 12.10.03
Intellon, PowerPacket, SIMPLE and SIMPLE PowerBus are registered trademarks of Intellon Corportation.
EUROPE
FAR EAST
CORPORATE
Bel Stewart Connector
45/46 Riverside
Medway City Estate
Rochester, Kent ME2 4DP U.K.
Tel 44-1634-722890
Fax 44-1634-716677
www.belfuse.com
Bel Fuse Ltd.
8F / 8 Luk Hop Street
San Po Kong
Kowloon, Hong Kong
Tel 852-2328-5515
Fax 852-2352-3706
www.belfuse.com
Bel Fuse Inc.
206 Van Vorst Street
Jersey City, NJ 07302
Tel 201-432-0463
Fax 201-432-9542
www.belfuse.com
相关型号:
791030D4498
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Wire Wrap Terminal, Natural Insulator, Receptacle,
WINCHESTER
791031C
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, Press Fit/Wire Wrap Terminal
WINCHESTER
791031CTA
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, Press Fit/Wire Wrap Terminal
WINCHESTER
791031D
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, Press Fit/Wire Wrap Terminal
WINCHESTER
791031DTA
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, Press Fit/Wire Wrap Terminal
WINCHESTER
791031K
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, Press Fit/Wire Wrap Terminal
WINCHESTER
791031KTA
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, Press Fit/Wire Wrap Terminal
WINCHESTER
791032C
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, Press Fit/Wire Wrap Terminal
WINCHESTER
791032CTA
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, Press Fit/Wire Wrap Terminal
WINCHESTER
791032D
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, Press Fit/Wire Wrap Terminal
WINCHESTER
791032K
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, Press Fit/Wire Wrap Terminal
WINCHESTER
791032KTA
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, Press Fit/Wire Wrap Terminal
WINCHESTER
©2020 ICPDF网 联系我们和版权申明