A0270164 [ETC]

BIX Cross-Connect System;


型号：	A0270164
厂家：	ETC
描述：	BIX Cross-Connect System
文件：	总6页 (文件大小：291K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

C O M M E R C I A L N E T W O R K I N G

—

C O P P E R

15.13

BIX Cross-Connect System

Distribution Connectors, Multiplying Connectors

and Modular Jack Connectors

A0393146 QCBIX1A4 Connector

BIX Distribution Connector

The BIX Distribution Connector is a 25-pair connector. The connector's symmetrical construction

allows termination of cables on one side and cross-connect jumper wires or BIX Patch Cords on the

other. Each BIX connector is equipped with 50 double-ended Insulation Displacement Connection (IDC)

clips for terminating plastic insulated solid copper conductors without stripping and pair splitters on

each side of the connector facilitate wire insertion.

BIX Multiplying Connector

BIX Multiplying Connectors are used to generate multiple outputs from a single input. Construction of

these connectors is identical to that of BIX Distribution Connectors, except for the IDC clips which are

bridged. BIX Multiplying Connectors are typically used in voice applications.

A0266827 QCBIX5A Multiplying Connector

The QCBIX2A Connector is built using 24 sets of bridged clips (2 clips each). It is used to terminate

various facilities where multiples of 2 are required.

The QCBIX5A Connector is built using 10 sets of bridged clips (5 clips each). It is used for multiple

jumper connections to the same equipment.

The QCBIX7A Connector is built using 10 sets of bridged clips (four 2-clip and six 7-clip bridged

arrangements). It is primarily intended for use with 1A type key telephone systems. Each connector

can terminate up to three lines of key equipment providing service to as many as seven key telephone

sets per line.

BIX Modular Jack Connector

AX100798 BIX Modular Jack Connector

BIX Modular Jack Connectors provide a fast and flexible method to manage small-to-medium cross-

connect installations. These connectors are built with a BIX connector pre-wired to standard modular

jacks. They allow front-access termination and patching.

The NXXCBMC6U Connector is a 6-port, 8-position modular connector used for data applications.

It exceeds all Category 5e channel requirements when used with PS5E Modular Cords in a

Belden IBDN 1200 System.

QCBIX36-type Connectors are used mostly for voice applications. The QCBIX36D connector is a

6-port, 8-position modular connector. It is pre-wired to USOC 8-wire wiring scheme specifications.

The QCBIX36C connector is an 8-port, 6-position modular connector. It is pre-wired to USOC 6-wire

wiring scheme specifications. The QCBIX36B connector is a 12-port, 6-position modular connector.

It is pre-wired to USOC 4-wire wiring scheme specifications.

Description

Belden Part Number

BIX Cross-Connect System

Distribution Connector

BIX Distribution Connector, 5-pair Marking

BIX Distribution Connector, 4-pair Marking

A0266828

A0393146

Multiplying Connector

BIX Multiplying Connector, QCBIX2A, 25-pair, 12x2-pair

BIX Multiplying Connector, QCBIX5A, 25-pair, 5x5-pair

BIX Multiplying Connector, QCBIX7A, 25-pair, 2x2-pair & 3x7-pair

Modular Jack Connector

A0269923

A0266827

A0269925

BIX Modular Jack Connector, NXXCBMC6U, 6-port, PS5E, T568A/B Coded

BIX Modular Jack Connector, QCBIX36D, 6-port, USOC, 8-pin

BIX Modular Jack Connector, QCBIX36C, 8-port, USOC, 6-pin

BIX Modular Jack Connector, QCBIX36B, 12-port, USOC, 4-pin

AX100798

A0341173

A0330864

A0330863

These products are in the process of being assessed for RoHS compliance. Please check our Web Site for the most current RoHS status.

F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1 - 8 0 0 - B E L D E N - 1

• w w w. b e l d e n . c o m

C O M M E R C I A L N E T W O R K I N G

—

C O P P E R

15.14

BIX Cross-Connect System

Mounts, Covers and Wire Management Accessories

A0340836 QMBIX12E BIX Mount, 300-pair

BIX Mount

BIX Mounts are basic components used in building a cross-connect system. They can accept BIX

Distribution, Multiplying or Modular Jack Connectors. The 300 and 250-pair mounts can be

wall-mounted or installed on BIX Frames. These mounts feature an interlocking design allowing

them to be stacked for larger cross-connect installations.

The BIX 50-pair Mount is typically used in small cross-connect installations. Also available is a 50-pair

mount with cover that is sold as an assembly and is typically used in small cross-connect installations

where security and/or dust protection is required.

BIX Cover

BIX Covers can be used to restrict access of cross-connect installations for better protection and

security. Two sizes are available to suit either the QMBIX12E 300-pair mount or the QMBIX10A

250-pair mount. The two locking covers used in wall or frame-mounted installations are molded

with translucent plastic allowing visual inspection. Also available are two covers used exclusively in

stand-alone QMBIX10A 250-pair mount installations: one locking, the other non-locking—both have

four cable entries, one at each corner.

A0284798 QMBIX10C BIX Mount, 50-pair

Distribution Ring

The Distribution Ring is used in wall mount installations providing a cross-connect channel for jumper

wires, patch cords and cables. The Distribution Ring interlocks with the QMBIX12E or QMBIX10A

mounts, providing proper spacing and alignment.

A0277853 QMBIX31A 50-pair Mount

with Locking Cover

Description

Belden Part Number

BIX Cross-Connect System

A0285986 Locking Cover for 250-pair Mount

BIX Mount

BIX Mount, QMBIX12E (300-pair)

BIX Mount, QMBIX10A (250-pair)

BIX Mount, QMBIX10C (50-pair)

BIX Mount with Cover

A0340836

A0270164

A0284798

BIX Mount with Cover, (Locking), 50-pair

BIX Mount with Cover, (Snap-on), 50-pair

BIX Locking Cover

A0277853

A0277854

BIX Locking Cover, for QMBIX12E (300-pair)

BIX Locking Cover, for QMBIX10A (250-pair)

BIX Cover

A0340838

A0285986

A0276396 BIX Cover, QMBIX10A,

Stand-alone installation, Locking

BIX Cover, QMBIX10A, Stand-alone installation, locking

BIX Cover, QMBIX10A, Stand-alone installation, non-locking

Distribution Ring

A0276396

A0276394

Distribution Ring

A0270168

These products are in the process of being assessed for RoHS compliance. Please check our Web Site for the most current RoHS status.

A0270168 Distribution Ring

F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1 - 8 0 0 - B E L D E N - 1

• w w w. b e l d e n . c o m

C O M M E R C I A L N E T W O R K I N G

—

C O P P E R

15.15

BIX Cross-Connect System

BIX Distribution Frames, Universal BIX-PAC

and Trunk Access Blocks

A0340837 BIX Frame

BIX Distribution Frame

BIX Distribution Frames provide a compact mounting unit for large cross-connect installations. The

QFBIX24E BIX Frame can accommodate up to 16 QMBIX12E 300-pair mounts, eight on the vertical side

and eight on the horizontal side. The QFBIX24E BIX Frame has a capacity of 4800-pair. The QFBIX24A

BIX Frame can accommodate up to 16 QMBIX10A 250-pair mounts, eight on the vertical side and eight

on the horizontal side. The QFBIX24A BIX Frame has a capacity of 4000-pair.

The BIX Frame End Kit consists of eight cable trays and eight distribution rings plus appropriate mounting

hardware. One kit is required to support cross-connect wires on the sides of the shelves in a single-

frame installation or on the end frames of a multi-frame installation.

The Distribution Rings are plastic rings used to manage cross-connect wires.

Universal BIX-PAC

The Universal BIX-PAC provides a fast, factory-wired, pre-tested and easy-to-install method of terminating

wiring for the voice environment. A typical application for this product is in the main distribution terminal

system or the riser terminal system, where it can provide connectivity and cross-connection for up to

250 pairs. The units come equipped with up to 10 QCBIX1A Connectors and 10 fifty-pin type telco

connectors for the termination of connectorized cables. Also available is a BIX-PAC Enclosure, which

is a fire-retardant polystyrene structural foam box that can house one BIX-PAC. The enclosure has a

snap-on cover and removable panels for cable entry on top, bottom and sides.

A0321776 Universal BIX-PAC Version 10-10

BIX Trunk Access Block

BIX Trunk Access Blocks provide a fast, factory-wired, pre-tested and easy-to-install method for

demarcation or testing points on customer premises. Typical applications are in the building entrance

system or the main distribution terminal system, where the demarcation point between the network

provider and the customer equipment usually can be found.

Description

Belden Part Number

BIX Cross-Connect System

BIX Distribution Frame

BIX Distribution Frame, 4800-pair (4 Shelves for 16 Mounts, 300-pair)

BIX Distribution Frame, 4000-pair (4 Shelves for 16 Mounts, 250-pair)

BIX Distribution Frame Accessories

BIX Distribution Frame Accessories, End Kit (4 Shelves)

BIX Distribution Frame Accessories, Distribution Ring

Universal BIX-PAC

A0340837

A0275511

A0318897 BIX PAC Enclosure

A0275512*

P0596540*

Universal BIX-PAC, 10-8, 8 RJ21X Female to 8 QCBIX1A Connectors

Universal BIX-PAC, 10-10, 10 RJ21X Female to 10 QCBIX1A Connectors

BIX PAC Enclosure

A0321775

A0321776

BIX PAC Enclosure, Gray

A0318897

BIX Trunk Access Block

BIX Trunk Access Block, 1 RJ21X Female to 1 QCBIX1A Connector

BIX Trunk Access Block, 2 RJ21X Female to 2 QCBIX1A Connector

A0327325

A0327326

*Eight Distribution Rings come as part of the BIX Distribution Frame End Kit. Additional Distribution Rings can be ordered separately.

Use (1) end kit per row of frames.

A0327326 BIX Trunk Access Block

These products are in the process of being assessed for RoHS compliance. Please check our Web Site for the most current RoHS status.

F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1 - 8 0 0 - B E L D E N - 1

• w w w. b e l d e n . c o m

C O M M E R C I A L N E T W O R K I N G

—

C O P P E R

15.16

BIX Cross-Connect System

BIX Patch Cords and B-Plus Cross-Connect Wire

A0410494 BIX Patch Cord, BIX-BIX, 2-pair

A0410469 BIX Patch Cord, BIX-BIX, 1-pair

22208260 B-Plus Cross-Connect Wire

BIX Patch Cords

BIX Patch Cords allow for high-density connections, coupled with flexibility for cost-effective installation

and administration. Installation and rearrangement of patch cords do not require any special tools or

training. BIX Patch Cord plugs terminate directly into QCBIX1A/1A4 connectors.

B-Plus Cross-Connect Wire

B-Plus Cross-Connect Wire is intended primarily for use between incoming cables and station

equipment in a Telecommunications Room or at a Main Cross-Connect.

Z Cross-Connect Wire is intended primarily for use in voice applications such as cross-connecting

PBX or Key Telephone system equipment to backbone or horizontal distribution cables.

Description

Belden Part Number

BIX Cross-Connect System

BIX Patch Cord

BIX Patch Cord, BIX-BIX, 2-pair, 1.2 m (4 ft.)

BIX Patch Cord, BIX-BIX, 1-pair, 1.2 m (4 ft.)

BIX Patch Cord, BIX-BIX, 2-pair, 2.1 m (7 ft.)

A0410494

A0410469

A0410495

A0410471

A0410496

A0410473

A0410497

A0410475

A0410493

BIX Patch Cord, BIX-BIX, 1-pair, 2.1 m (7 ft.)

BIX Patch Cord, BIX-BIX, 2-pair, 3.0 m (10 ft.)

BIX Patch Cord, BIX-BIX, 1-pair, 3.0 m (10 ft.)

BIX Patch Cord, BIX-BIX, 2-pair, 4.6 m (15 ft.)

BIX Patch Cord, BIX-BIX, 1-pair, 4.6 m (15 ft.)

BIX Patch Cord, BIX-BIX, 1-pair, 7.6 m (25 ft.)

For 4-pair connections, please see the GigaBIX Patch Cord section.

B-Plus Cross-Connect Wire

24 AWG, 1-pair, Wh/Bl, 305 m (1000 ft.), K-Carton

24 AWG, 1-pair, Wh/Bl, 305 m (1000 ft.), Spool (S77)

24 AWG, 2-pair, Wh/Bl/Wh/Or, 305 m (1000 ft.), K-Carton

24 AWG, 2-pair, Wh/Gr/Wh/Or, 305 m (1000 ft.), K-Carton

24 AWG, 3-pair, Wh/Bl/Wh/Or/Wh/Gr, 152 m (500 ft.), K-Carton

24 AWG, 3-pair, Wh/Bl/Wh/Or/Wh/Gr, 200 m, K-Carton

24 AWG, 4-pair, Wh/Bl/Wh/Or/Wh/Gr/Wh/Br, 152 m (500 ft.), K-Carton

Z Cross-Connect Wire

22208250

22208253

22208260

22208231

22208265

22208235

22208270

Z Cross-Connect Wire, 24 AWG, 1-pair, Bl/Ye, 300 m (984 ft.), Spool

Z Cross-Connect Wire, 24 AWG, 1-pair, Bl/Rd, 300 m (984 ft.), Spool

22208010

22208067

These products are in the process of being assessed for RoHS compliance. Please check our Web Site for the most current RoHS status.

F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1 - 8 0 0 - B E L D E N - 1

• w w w. b e l d e n . c o m

C O M M E R C I A L N E T W O R K I N G

—

C O P P E R

15.17

BIX Cross-Connect System

BIX Tools, Testing Tools,

Accessories and Designation Strip

A0270165 BIX Connecting Tool

BIX Connecting Tool

The BIX Connecting Tool is the only tool required to terminate cables, pigtails or jumper wires on all

GigaBIX and BIX connection products. The BIX Connecting Tool is a spring-activated hand tool. A single

forward movement will seat the wire into the BIX IDC clip and cut off the excess wire. The tool will

terminate 22-26-AWG plastic insulated solid copper conductors. A separate leather BIX Tool Pouch to

carry and protect the BIX Tool can be ordered.

BIX Test Probe

Tool in CUT position

Tool in NO CUT position

The BIX Test Probe is a single-pair probe that clips onto the termination clip of BIX Distribution or BIX

Modular Jack Connectors to facilitate testing.

BIX Accessories

The BIX Special Service Guard is a single-pair red plastic clip used to identify a connection within a

BIX distribution field that requires special attention prior to any maintenance work.

C0054642

Tool Pouch

The BIX Bridging Clip is a single-pair clip used to bridge single-pair connections of two BIX

connectors.

The BIX Wire Retainer is a plastic extrusion that fits over the terminated wires on a BIX Connector

to prevent them from being pulled out of the IDC contacts. It can be used to secure a permanent

connection on either side of a BIX Connector.

A0270166 BIX Test Probe

This 19 in. Rack Bracket Kit provides the hardware for BIX Mount installation into a 19 in. rack. This

kit comes complete with two mounting bars, four screws for rack mounting, four screws for BIX Mount

assemblies and an installation guide.

BIX Cable Ties are used for securing wire bundles to the BIX Connector.

BIX Designation Strip

A0270172

Special Service

Guard

The BIX Designation Strip is designed to be used in conjunction with all BIX Mounts and BIX

Connectors. It snaps in between two connectors and provides space for self adhesive BIX labels.

The strip is made of white fire-retardant plastic, with ridges on the top and bottom for easy alignment

and placement of designation labels. (See the LabelFlex section for designation labels.)

Description

Belden Part Number

A0325493

Bridging Clip

BIX Cross-Connect System

BIX Tools

BIX Connecting Tool

Tool Pouch

A0270165

C0054642

BIX Test Probe

BIX Test Probe, 1-pair, 1/pack

BIX Accessories

A0270166

P0660798 BIX Wire

Retainer

BIX Special Service Guard, 1-pair, Red, 50/pack

BIX Bridging Clip, 1-pair, Gray, 50/pack

BIX Bridging Clip, 1-pair, White, 50/pack

BIX Wire Retainer, 100/pack

19 in. Rack Bracket Kit, 2 bars/pack

BIX Cable Tie, 100/pack

A0270172

A0325091

A0325493

P0660798

A0352331

C0039222

C0039222 BIX

Cable Tie

BIX Designation Strip

BIX Designation Strip, White, 50/pack

A0352331 19 in. Rack

Bracket Kit

A0270169

These products are in the process of being assessed for RoHS compliance. Please check our Web Site for the most current RoHS status.

A0270169 BIX Designation Strip

F o r m o r e i n f o r m a t i o n , c o n t a c t B e l d e n Te c h n i c a l S u p p o r t : 1 - 8 0 0 - B E L D E N - 1

• w w w. b e l d e n . c o m

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Belden Wire & Cable:

A0266828 A0270164 A0270166 A0270169 A0393146

A0270164 [ETC]

相关型号：

A0270168

A0273

A0274446

A0274447

A0274448

A0275

A0276394

A0276396

A0277

A0277853

A0277854

A0292266