A108120600 [ETC]
;Timers
Delay on Operate
Types A 108, A 101, A 208, A 201
• Time ranges: 0.15 s to 600 s
• Automatic start
• Knob-adjustable time within range
• Oscillator-controlled time circuit
• Repeatability deviation: ≤ 1%
• Output: 10 A SPDT or 8 A DPDT relay
• Plug-in type module
• Scantimer housing
• LED-indication for relay on
• AC or DC power supply
Product Description
Ordering Key
A 108 024 600
Function
Output
Type
Mono-function, plug-in, de- relays can be used to pre-
lay on operate miniature time vent several motors from
relays up to 600 s (10 min) starting simultaneously due
Power supply
Time range
covering
ranges. These economical
3 individual time to power supply interruptions.
Type Selection
Plug
Output Time ranges
Supply: 24 VAC/DC
Supply: 120 VAC
Supply: 220 VAC
Circular
8 pin
SPDT
DPDT
0.15- 6 s
1.5 - 60 s
15 -600 s
A 108 024 006
A 108 024 060
A 108 024 600
A 108 120 006
A 108 120 060
A 108 120 600
A 108 220 006
A 108 220 060
A 108 220 600
Circular
11 pin
0.15- 6 s
1.5 - 60 s
15 -600 s
A 101 024 006
A 101 024 060
A 101 024 600
A 101 120 006
A 101 120 060
A 101 120 600
A 101 220 006
A 101 220 060
A 101 220 600
Circular
8 pin
0.15- 6 s
1.5 - 60 s
15 -600 s
A 208 024 006
A 208 024 060
A 208 024 600
A 208 120 006
A 208 120 060
A 208 120 600
A 208 220 006
A 208 220 060
A 208 220 600
Circular
11 pin
0.15- 6 s
1.5 - 60 s
15 -600 s
A 201 024 006
A 201 024 060
A 201 024 600
A 201 120 006
A 201 120 060
A 201 120 600
A 201 220 006
A 201 220 060
A 201 220 600
Time Specifications
Time ranges
0.15- 6 s
1.5 - 60 s
15 - 600 s
Repeatability deviation
Time variation
Within rated power supply
and ambient temperature
≤ 1%
≤ 0.05%/V
≤ 0.2%/°C
Time range accuracy
0 to +10% on max.
min. actual time ≤ min.
set time
Reset
Time and/or relay
Power supply interruption
≥ 250 ms
Specifications are subject to change without notice (25.10.99)
1
A 108, A 101, A 208, A 201
Output Specifications
A 108, A 101
A 208, A 201
Output
Basic electrical insulation
SPDT relay
250 VAC (rms) (contact/electronics)
DPDT relay
250 VAC (rms) (contacts/elec., contact/contact)
Contact ratings (Ag-CdO)
µ (micro gap)
µ (micro gap)
Resistive loads
AC 1 10 A/250 VAC (2500 VA)
DC 1 1 A/250 VDC (250 W)
or 10 A/25 VDC (250 W)
8 A/250 VAC (2000 VA)
0.4 A/250 VDC (100 W)
4 A/25 VDC (100 W)
2.5 A/230 VAC
Small inductive loads AC 15 2.5 A/230 VAC
DC 13 5 A/24 VDC
5 A/24 VDC
Mechanical life
Electrical life
≥ 30 x 106 operations
AC 1 ≥ 2.5 x 105 operations (at max. load)
≥ 30 x 106 operations
≥ 2.5 x 105 operations (at max. load)
Operating frequency
≤ 7200 operations/h
≤ 7200 operations/h
Insulation voltages
Rated insulation voltage
≥ 2.0 kVAC (rms) (contact/electronics)
≥ 2.0 kVAC (rms) (contact/electronics)
Rated transient protection volt. 4 kV (1.2/50 µs) (contact/electronics) (IEC 60664)
4 kV (1.2/50 µs) (contact/electronics) (IEC 60664)
Supply Specifications
General Specifications
Power-on delay
Power-off delay
Indication for
Output ON
≤ 200 ms
≥ 250 ms
Power supply AC types
installation cat. III (IEC 60664)
Rated operational voltage
through pins 2 & 10
or pins 2 & 7
220
220 VAC + 15/- 20%,
45 to 65 Hz
120 VAC + 15/- 20%,
45 to 65 Hz
24 VAC + 15/- 20%,
45 to 65 Hz
≥ 10 ms
LED, red
IP 20 B
2 (IEC 60664)
-20° to +50°C (-4° to +122°F)
-50° to +85°C (-58° to +185°F)
120
024
Environment
Polution degree
Operating temperature
Storage temperature
Drop out tolerance
Rated insulation voltage
Rated transient protection volt. 4 kV (1.2/50 µs) @ 220 VAC
2.5 kV (1.2/50 µs) @ 120 VAC
None
Weight
Approvals
85 g
UL, CSA
800 V (1.2/50 µs) @ 24 VAC
(line/neutral)
Power supply DC type
Rated operational voltage 024 24 VDC + 15/- 20% (pin 2 pos.)
Rated insulation voltage None
Rated transient protection volt. 800 V (1.2/50 µs)
Installation cat. III (IEC 60664)
Consumption
AC supply
DC supply
60 mA @ 50 Hz/70 mA @ 60 Hz
1 W
Wiring Diagrams
Mode of Operation
The delay period begins when If power supply is interrupted
power supply is applied.
for more than 250 ms before
the relay operates, the time
At the end of the set delay, circuit is reset to zero and the
the relay will operate and will time relay is ready for a new
not release until power sup- time period.
ply is interrupted.
A recovery period of 250 ms
should be allowed before re-
applying power supply.
Power supply
A 108, A 208
Power supply
A 101, A 201
2
Specifications are subject to change without notice (25.10.99)
A 108, A 101, A 208, A 201
Accessories
Time Setting
Knob-adjustable on scale in
seconds.
Sockets◊
S 408, S 411
HF
SM 13
BB4
Hold down spring◊
Mounting rack
Socket cover
Potentiometer lock
PL 1
For further information refer to "Accessories".
Operation Diagram
Power supply
Relay on
Specifications are subject to change without notice (25.10.99)
3
相关型号:
A10814MNCB
Rotary Switch, 8 Positions, SP8T, Latched, 0.02A, 20VDC, Solder Terminal, High-flatted Actuator, Through Hole-straight, ROHS COMPLIANT
ITT
A10814MNCBE
Rotary Switch, 8 Positions, SP8T, Latched, 0.02A, 20VDC, Solder Terminal, High-flatted Actuator, Through Hole-straight, ROHS COMPLIANT
ITT
A10814MNCBF
Rotary Switch, 8 Positions, SP8T, Latched, 0.02A, 20VDC, Solder Terminal, High-flatted Actuator, Through Hole-straight, ROHS COMPLIANT
ITT
A10814MNCBK
Rotary Switch, 8 Positions, SP8T, Latched, 0.02A, 20VDC, Solder Terminal, High-flatted Actuator, Through Hole-straight, ROHS COMPLIANT
ITT
A10814MNCG
Rotary Switch, 8 Positions, SP8T, Latched, 0.35A, 125VDC, Solder Terminal, High-flatted Actuator, Through Hole-straight, ROHS COMPLIANT
ITT
A10814MNCGE
Rotary Switch, 8 Positions, SP8T, Latched, 0.35A, 125VDC, Solder Terminal, High-flatted Actuator, Through Hole-straight, ROHS COMPLIANT
ITT
A10814MNCGF
Rotary Switch, 8 Positions, SP8T, Latched, 0.35A, 125VDC, Solder Terminal, High-flatted Actuator, Through Hole-straight, ROHS COMPLIANT
ITT
A10814MNCGK
Rotary Switch, 8 Positions, SP8T, Latched, 0.35A, 125VDC, Solder Terminal, High-flatted Actuator, Through Hole-straight, ROHS COMPLIANT
ITT
A10814MNCQ
Rotary Switch, 8 Positions, SP8T, Latched, 0.35A, 125VDC, Solder Terminal, High-flatted Actuator, Through Hole-straight, ROHS COMPLIANT
ITT
A10814MNCQE
Rotary Switch, 8 Positions, SP8T, Latched, 0.35A, 125VDC, Solder Terminal, High-flatted Actuator, Through Hole-straight, ROHS COMPLIANT
ITT
A10814MNCQF
Rotary Switch, 8 Positions, SP8T, Latched, 0.35A, 125VDC, Solder Terminal, High-flatted Actuator, Through Hole-straight, ROHS COMPLIANT
ITT
A10814MNCQK
Rotary Switch, 8 Positions, SP8T, Latched, 0.35A, 125VDC, Solder Terminal, High-flatted Actuator, Through Hole-straight, ROHS COMPLIANT
ITT
©2020 ICPDF网 联系我们和版权申明