ABBN3320 [ETC]
Heavy duty switches & pilot lights offer both variety and reliability Endures harsh environments;型号: | ABBN3320 |
厂家: | ETC |
描述: | Heavy duty switches & pilot lights offer both variety and reliability Endures harsh environments |
文件: | 总51页 (文件大小:13859K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ø30 Series Switches & Pilot Lights
Heavy duty switches & pilot lights offer both variety and reliability
Endures harsh environments
•ꢀDegree of protection: IP65
•ꢀUL, CSA approved, and EN compliant.
Applicable Standards
UL 508
Mark
File No. or Organization
UL Listing
File No. E68961
CSA C22.2 No.14
EN60947-5-1
GB14048.5
CSA File No. LR21451
EU Low Voltage Directive
CCC No. 200501030514658
Specifications and Ratings
Contact Ratings
Contact Block
BS/BST (ø30 series)
Pushbuttons
Illuminated Pushbuttons
Selector Switches
Illuminated Selector Switches
Selector Pushbuttons
Rated Insulation Voltage
Rated Continuous Current
600V
10A
Contact Ratings by Utilization Category
IEC 60947-5-1
AC-15 (A600)
DC-13 (P600)
Characteristics
Contact Ratings by Utilization Category
Operational Voltage
24V
10A
10A
10A
5A
48V
—
50V
10A
7A
110V
10A
5A
220V
6A
440V
2A
AC-12 Control of resistive loads and solid state loads
AC
50/60 Hz
AC-15 Control of electromagnetic loads (> 72 VA)
DC-12 Control of resistive loads and solid state loads
DC-13 Control of electromagnets
—
3A
1A
Operational
Current
5A
2A
—
2.2A
1.1A
1.1A
0.6A
—
DC
—
—
Note: The operational current represents the classification by making and breaking currents (IEC 60947-5-1).
Minimum applicable load: 3V AC/DC, 5 mA (applicable range may vary with operating conditions and load types)
For mono-levers and cam switches, see pages 55 and 58.
BS (BST) Contact Block
Contact Blocks
Single-pole Contact Block
ꢀ Interlock
ingꢀGroove
Contact
M3.5 Terminal Screw
1NO
1NC
1NO (early make)
1NC (late break)
BS
BS010E
BST010
Green
BS001E
BST001
Red
BS010SE
BST010S
Black
BS001SE
BST001S
White
Part
No.
BST
Push Rod
BST contact blocks are used for the following switches and are not
interchangeable with BS contact blocks.
(The BS housing is dark gray and the BST housing is light gray.)
•ꢀPushlock turn reset and push turn lock switches
•ꢀLED illuminated pushbuttons
•ꢀLED/incandescent illuminated selector switches
•ꢀAll models of diecast zinc housing swiches & pilot lights
Inspection
Window
Push Rod
Mounting
Screw
•ꢀDurable nylon 66 housing has a high resistance against alkalis.
•ꢀSilver contacts. Gold contact (gold-plated silver) also available.
•ꢀUp to four blocks in two layers can be mounted onto each operator.
(14/03/18)
16
ø30
ø30
ø30 Series Switches & Pilot Lights
LED Illuminated Unit Specifications
LED Lamp
Unit
Input
Operating Voltage
Color Code
➁
Lamp Base
BA9S/13
Part No.
Voltage
6V AC/DC
12V AC/DC
24V AC/DC
6V AC/DC
12V AC/DC
24V AC/DC
6V AC/DC 10ꢀ
12V AC/DC 10ꢀ
24V AC/DC 10ꢀ
6V AC/DC 10ꢀ
12V AC/DC 10ꢀ
24V AC/DC 10ꢀ
LSTD-6
➁
➁
➁
➁
➁
➁
LSTD-1
LSTD-2
LETD-6
LETD-8
LETD-2
Full Voltage
E12/15
BA9S/13
E12/15
A:
amber
G: green
Pilot Light
PW: pure white
R:
S:
W: white
Y:
100/110V AC
120V AC
200/220V AC
240V AC
380V AC
400/440V AC
(50/60 Hz)
Illuminated Pushbutton
red
blue
LSTD-6
➁
➁
Illuminated Selector Switch
Transformer
6V AC/DC 10ꢀ
6V AC/DC 10ꢀ
yellow
LETD-6
BA9S/13
E12/15
LSTD-6
LETD-6
➁
DC-DC Converter 110V DC
➁
Note: A pure white LED lamp is used for yellow illumination.
Incandescent Illuminated Unit Specifications
Incandescent Lamp
Part No.
Unit
Input
Operating Voltage
Color Code
➁
Lamp Base
BA9S/13
Rating
6V AC/DC
12V AC/DC
24V AC/DC
6V AC/DC
12V AC/DC
24V AC/DC
LS-6
LS-8
LS-3
LE-6
LE-8
LE-3
1W (6.3V)
1W (18V)
1W (30V)
2W (6.3V)
2W (18V)
12W (30V)
Full Voltage
A: amber
G: green
O: orange
R: red
E12/15
BA9S/13
E12/15
Pilot Light
Illuminated Pushbutton
100/110V AC
120V AC
200/220V AC
240V AC
380V AC
Illuminated Selector Switch
S: blue
LS-6
LE-8
1W (6.3V)
2W (18V)
W: white
Transformer
400/440V AC
480V AC
(50/60 Hz)
LED Lamp Ratings (LSTD)
Part No.
LSTD-6
LSTD-1
LSTD-2
➁
➁
➁
Lamp Base
Rated Voltage
Voltage Range
BA9S/13
6V AC/DC
12V AC/DC
24V AC/DC
6V AC/DC 10ꢀ
8 mA
12V AC/DC 10ꢀ
11 mA
24V AC/DC 10ꢀ
11 mA
AC
Current
Draw
A, R, W: 7 mA
G, PW, S: 5.5 mA
DC
10 mA
10 mA
A (amber), G (green), PW (pure white), R (red), S (blue), W (white)
Same as illumination color
Color Code
Lamp Base Color
Voltage Marking
➁
Die stamped on the base
Approx. 50,000 hours
Life (reference value)
Internal Circuit
(The luminance is reduced to 50ꢀ the initial intensity when used on complete DC.)
X1
X2
LEDꢀChip
ProtectionꢀDiode
ZenerꢀDiodeꢀ
Resistor
(14/03/18)
17
ø30
ø30 Series Switches & Pilot Lights
LED Lamp Ratings (LETD)
Part No.
LETD-6
LETD-8
LETD-2
➁
➁
➁
Lamp Base
Rated Voltage
Voltage Range
E12/15
6V AC/DC
6V AC/DC 10ꢀ
A, R, W, Y
17 mA
12V AC/DC
24V AC/DC
12V AC/DC 10ꢀ
A, R, W, Y
7 mA
24V AC/DC 10ꢀ
G, S
G, S
8 mA
Current
AC
11 mA
Draw
DC
14 mA
5.5 mA
6.5 mA
10 mA
A (amber), G (green), R (red), S (blue), W (white), Y (yellow)
Same as illumination color
Color Code
➁
Lamp Base Color
Voltage Marking
Die stamped on the base
Approx. 50,000 hours
(The luminance is reduced to 50ꢀ the initial intensity when used on complete DC.)
Life (reference value)
A, R, W
Y
A, R, W
Y
Internal Circuit
G, S
LEDꢀChip
ProtectionꢀDiode
ZenerꢀDiodeꢀ
Resistor
Incandescent Lamp Ratings (LS)
Part No.
LS-6
BA9S/13
LS-8
LS-2
LS-3
Lamp Base
Rated Voltage
Wattage
6V AC/DC
1W (6.3V)
12V AC/DC
1W (18V)
18V AC/DC
1W (24V)
24V AC/DC
1W (30V)
Voltage Marking
Die stamped on the base
Approx. 1,000 hours minimum
(mean value when used on the rated voltage)
Life (reference value)
Incandescent Lamp Ratings (LE)
Part No.
LE-6
LE-8
LE-2
LE-3
Lamp Base
Rated Voltage
Wattage
E12/15
6V AC/DC
2W (6.3V)
12V AC/DC
2W (18V)
18V AC/DC
2W (24V)
24V AC/DC
2W (30V)
Voltage Marking
Die stamped on the base
Approx. 1,000 hours minimum
(mean value when used on the rated voltage)
Life (reference value)
(14/03/18)
18
ø30
ø30
ø30 Series Switches & Pilot Lights
Specifications
Operating Temperature
Storage Temperature
Operating Humidity
–25 to +50°C (no freezing)
–40 to +80°C (no freezing)
45 to 85ꢀ RH (no condensation)
50 mΩ maximum (initial value)
100 MΩ minimum (500V DC megger)
Contact Resistance
Insulation Resistance
Between live and dead metal parts: 2,500V AC, 1 minute
Dielectric Strength
Vibration Resistance
Shock Resistance
(Full voltage and pilot lights:
2,000V AC, 1 minute)
Operating extremes: 5 to 55 Hz, amplitude 0.5 mm
Damage limits:
Operating extremes:
1,000 m/s2
100 m/s2
Pushbuttons
Momentary:
5,000,000
500,000
Maintained:
Illuminated pushbuttons
Momentary:
2,500,000
500,000
500,000
500,000
500,000
250,000
500,000
250,000
500,000
Maintained:
Selector switches:
Key selector switches:
Illuminated selector switches:
Selector pushbuttons:
Mono-lever switches:
(Interlocking):
Pushlock turn reset
Mushroom push-pull switch
Two contact blocks:
Four contact blocks:
Mechanical Life
(minimum operations)
500,000
200,000
Pushbuttons:
Illuminated pushbuttons:
Selector switches:
Key selector switches:
Illuminated selector switches:
Selector pushbuttons:
Mono-lever switches:
(Interlocking):
500,000
500,000
500,000
500,000
500,000
250,000
500,000
250,000
*1
*1
*2
*2
*2
*2
*3
*3
Electrical Life
(minimum operations)
*1 Switching frequency 1,800 operations/h, duty ratio 40ꢀ *4
*2 Switching frequency 1,200 operations/h, duty ratio 40ꢀ
*3 Switching frequency 900 operations/h, duty ratio 40ꢀ
*4 Switching frequency 900 operations/h for square twin or twin main-
tained
Degree of Protection
Part No.
Unit
NEMA ICS 6-110
IEC 60529
IP65
Pushbuttons, pilot lights, illuminated pushbuttons, selector switches, selector
pushbuttons, mono-lever switches, and cam switches (ACSNO/ACSSO)
Type 1, 2, 3, 3R, (3S), 4, 5, 12,13
A****
U****
Illuminated selector switches, key pushbuttons, key reset pushbuttons, key cam
switches, and key selector switches
Type 1, 2, 3, 3R, 5, 12, 13
Type 1, 2
IP54
IP40
Square pushbuttons, square pilot lights, and cam switches (UC)
Note: (3S) of NEMA ICS 6-110 applies to the pilot lights with round lens.
Mounting Hole Layout
(Twin Maintained)
*Tꢀ he minimum mounting centers are applicable to switches with
one layer of contact blocks (two contact blocks). When two layers
of contact blocks (four contact blocks) are mounted, determine
the minimum mounting centers in consideration of convenience
for wiring.
R0.8 max.
4.8+00.2
R0.8 max.
4.8+0.2
ø30.5
0
+0.5
+0.5
0
0
•ꢀMushroom with shroud:
50 mm minimum
•ꢀJumbo mushroom:
67 mm minimum
•ꢀJumbo mushroom with shroud: 76 mm minimum
•ꢀSquare twin:
•ꢀSelector switch with lever:
55 mm minimum
50 mm minimum
✩ The 4.8 mm recess is for preventing rotation and is not neces-
sary when the nameplate or anti-rotation ring is not used.
50∗
Note: For mounting hole layout of pushbuttons, mono-lever switches, and cam switches, see each section.
(14/03/18)
19
ø30
ø30 Series Switches & Pilot Lights (Ordering Information)
Ordering Information
Standard Units
Terminal Cover
•ꢀWhen a terminal cover is required, order an applicable
•ꢀSpecify an operator or lens color code in the Part No.
terminal cover referring to page 67.
•ꢀBlack, green, and red buttons are included with flush push-
buttons.
•ꢀTerminal covers, nameplates, and accessories are ordered
separately.
The Part No. development charts shown below can be used to specify switches and pilot lights other than those listed on the
following pages. Gold-plated silver contacts are also available.
ø30 Series Illuminated Pushbuttons
ø30 Series Pushbuttons
ABN2 11 R - MAU
ALFN2 126 13 D N R - MAU
Optional contact
MAU: Gold-plated silver contact
Button color code
Contact arrangement code
Optional contact
MAU: Gold-plated silver contact
Lens color code
Contact arrangement code
11: 1NO-1NC
02: 2NC
22: 2NO-2NC
40: 4NO
Operating voltage code
10: 1NO
11: 1NO-1NC
02: 2NC
01: 1NC
20: 2NO
22: 2NO-2NC
04: 4NC
20: 2NO
31: 3NO-1NC
13: 1NO-3NC
04: 4NC
40: 4NO
13: 1NO-3NC
30: 3NO
12: 1NO-2NC
31: 3NO-1NC
03: 3NC
21: 2NO-1NC
Note:
Note:
•ꢀMushroom pull ATN23 can have a maximum of two contact
•ꢀIlluminated pushbuttons cannot have an odd number of contact
blocks, such as 1NO, 1NC, 3NO, 2NO-1NC, 1NO-2NC, and 3NC.
blocks.
•ꢀMushroom push-pull return ATN22 cannot have only NO or only
NC contacts.
•ꢀNo other contact configurations are available for square twin
UWQN1 than those specified in this catalog.
ø30 Series Pilot Lights
APN1 116 D R
Lens color code
Operating voltage code
Note:
•ꢀLED lamps cannot be used on 480V AC transformers.
(14/03/18)
20
ø30
ø30
ø30 Series Switches & Pilot Lights (Ordering Information)
ø30 Series Selector Switch
ASN 2 L 11 - MAU
ø30 Series Illuminated Selector Switch
ASLN 2 16 22 D N R - MAU
Optional contact
MAU: Gold-plated silver contact
Contact arrangement code
Operator
(blank): Knob
Optional contact
MAU: Gold-plated silver contact
Lens color code
Contact arrangement code
Operating voltage code
Number of positions
L:
Lever
Operator position code
ø30 Series Key Selector Switch
ASN 2 K 11 D - MAU
Optional contact
MAU: Gold-plated silver contact
Key removable position code
2-position
•ꢀMaintained
(blank): Removable in all positions
B:
C:
Removable in left only
Removable in right only
•ꢀSpring return from right
(blank): Removable in left only
•ꢀSpring return from left
(blank): Removable in right only
3-position
•ꢀMaintained
(blank): Removable in all positions
B:
C:
D:
E:
G:
H:
Removable in left and center
Removable in right and center
Removable in center only
Removable in right and left
Removable in left only
Removable in right only
•ꢀSpring return from right
(blank): Removable in left and center
D:
G:
Removable in center only
Removable in left only
•ꢀSpring return from left
(blank): Removable in right and center
D:
H:
Removable in center only
Removable in right only
•ꢀSpring return two-way
(blank): Removable in center only
Contact arrangement code
Operator position code
Note:
•ꢀThe key cannot be removed in the return position.
(14/03/18)
21
ø30
ø30 Series Pushbuttons
Flush / Extended / Extended w/Half Shroud / Extended w/Full Shroud Pushbuttons
Package Quantity: 1
Button Color
Code
➀
Shape
Operation
Contact
Part No.
Dimensions (mm)
Panel Thickness 0.8 to 7.5
1NO
1NC
ABN110
M3.5 Terminal Screw
Flush
ABN1
➀
➀
➀
➀
➀
➀
ABN101
ABN111
ABN120
ABN102
ABN122
1NO-1NC
2NO
Momentary
Black (B), green
(G), and red (R)
buttons are sup-
plied with each
unit.
23
6
40
(
46 1 or
2 blocks
(nameplate
sold sepa-
rately)
2NC
)
9
(
)
69 3 or 4 blocks
2NO-2NC
1NO
AON110
AON101
AON111
AON120
AON102
AON122
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
Flush
AON1
Panel Thickness 0.8 to 7.5
M3.5 Terminal Screw
Specify S, W, or
Y when a blue,
white, or yellow
button is required.
1NC
1NO-1NC
2NO
Maintained
Momentary
Maintained
Momentary
Maintained
Momentary
Maintained
23
6
40
(nameplate
sold sepa-
rately)
(
)
68 1 to 2 blocks
2NC
(
)
91 3 to 4 blocks
9
2NO-2NC
1NO
Panel Thickness 0.8 to 7.5
M3.5 Terminal Screw
ABN210
ABN201
ABN211
ABN220
ABN202
ABN222
Extended
ABN2
1NC
1NO-1NC
2NO
23
6
40
9
(
46 1 or
2 blocks
2NC
(nameplate sold
separately)
)
15.5
(
)
69 3 or 4 blocks
2NO-2NC
1NO
AON210
AON201
AON211
AON220
AON202
AON222
Extended
AON2
➀
➀
➀
➀
➀
➀
Panel Thickness 0.8 to 7.5
M3.5 Terminal Screw
1NC
1NO-1NC
2NO
23
6
40
(
)
9
68 1 to 2 blocks
2NC
(nameplate sold
separately)
(
)
91 3 to 4 blocks
15.5
2NO-2NC
1NO
Panel Thickness 0.8 to 4
ABN2G10
ABN2G01
ABN2G11
ABN2G20
ABN2G02
ABN2G22
Extended with Half Shroud
ABN2G
➀
➀
➀
➀
➀
➀
M3.5 Terminal Screw
1NC
Specify a button
color code in place
1NO-1NC
2NO
23
6
40
of
in the Part
➀
(
42 1 or
2 blocks
No.
2NC
)
(nameplate sold
separately)
20.5
(
65 3 or 4 blocks)
2NO-2NC
1NO
B: black
G: green
R: red
S: blue
W: white
Y: yellow
Extended with Half Shroud
AON2G
AON2G10
AON2G01
AON2G11
AON2G20
AON2G02
AON2G22
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
Panel Thickness 0.8 to 4
M3.5 Terminal Screw
1NC
1NO-1NC
2NO
23
6
40
(
64 1 or 2 blocks)
2NC
(nameplate sold
separately)
(
)
87 3 or 4 blocks
20.5
2NO-2NC
1NO
Extended with Full Shroud
ABN2F
Panel Thickness 0.8 to 7.5
ABN2F10
ABN2F01
ABN2F11
ABN2F20
ABN2F02
ABN2F22
AON2F10
AON2F01
AON2F11
AON2F20
AON2F02
AON2F22
M3.5 Terminal Screw
1NC
1NO-1NC
2NO
23
6
40
(
46 1 or
2 blocks
2NC
)
17
(nameplate sold
separately)
(
)
69 3 or 4 blocks
2NO-2NC
1NO
Extended with Full Shroud
AON2F
Panel Thickness 0.8 to 7.5
M3.5 Terminal Screw
1NC
1NO-1NC
2NO
23
6
40
(
68 1 or 2 blocks)
2NC
(nameplate sold
separately)
(
)
91 3 or 4 blocks
17
2NO-2NC
•ꢀRound bezel and shroud (metal): Chrome-plated
•ꢀOther contact arrangements and gold-plated silver contacts are also available. See page 20.
(14/03/18)
22
ø30
ø30
ø30 Series Pushbuttons
Mushroom / Jumbo Mushroom / Square Flush / Square Extended Pushbuttons
Package Quantity: 1
Button Color
Code
➀
Shape
Operation
Contact
Part No.
Dimensions (mm)
Panel Thickness 0.8 to 7.5
Mushroom
ABN3
M3.5 Terminal Screw
1NO
1NC
ABN310
➀
➀
➀
➀
➀
➀
ABN301
ABN311
ABN320
ABN302
ABN322
1NO-1NC
2NO
Momentary
23
6
40
(
46 1 or
2NC
)
2 blocks
21
(nameplate sold
separately)
(
)
69 3 or 4 blocks
2NO-2NC
1NO
Mushroom
AON3
AON310
AON301
AON311
AON320
AON302
AON322
➀
➀
➀
➀
➀
➀
Panel Thickness 0.8 to 7.5
M3.5 Terminal Screw
B: black
G: green
R: red
S: blue
W: white
Y: yellow
1NC
1NO-1NC
2NO
Maintained
Momentary
Momentary
Momentary
23
6
40
(
)
68 1 or 2 blocks
2NC
(nameplate sold
separately)
(
)
91 3 or 4 blocks
21
2NO-2NC
1NO
Mushroom with Full Shroud
ABN3G
Panel Thickness 0.8 to 6.5
ABN3G10
ABN3G01
ABN3G11
ABN3G20
ABN3G02
ABN3G22
M3.5 Terminal Screw
➀
➀
➀
➀
➀
➀
1NC
1NO-1NC
2NO
6
23
(
44 1 or
2 blocks
2NC
)
23
2NO-2NC
1NO
(
)
67 3 or 4 blocks
Panel Thickness 0.8 to 7.5
Palm Mushroom
ABN4
ABN410
ABN401
ABN411
ABN420
ABN402
ABN422
➀
M3.5 Terminal Screw
1NC
➀
➀
➀
➀
➀
1NO-1NC
2NO
6
23
(
46 1 or
2 blocks
)
2NC
35
(
)
69 3 or 4 blocks
2NO-2NC
1NO
Jumbo Mushroom with
Shallow Shroud
ABN4G
Panel Thickness 0.8 to 7.5
ABN4G10
ABN4G01
ABN4G11
ABN4G20
ABN4G02
ABN4G22
➀
➀
➀
➀
➀
➀
➀
M3.5 Terminal Screw
1NC
1NO-1NC
2NO
B: black
G: green
R: red
6
23
(
46 1 or
)
2NC
2 blocks
28
(
)
69 3 or 4 blocks
2NO-2NC
1NO
Jumbo Mushroom with Deep
Shroud
ABN4F
ABN4F10
ABN4F01
ABN4F11
ABN4F20
ABN4F02
ABN4F22
Panel Thickness 0.8 to 7.5
M3.5 Terminal Screw
1NC
1NO-1NC
2NO
➀
➀
➀
➀
➀
Momentary
6
23
(
46 1 or
)
2 blocks
2NC
32.5
(
)
69 3 or 4 blocks
2NO-2NC
1NO
Panel Thickness 0.8 to 5.5
Square Flush
UBQN1
UBQN110
UBQN101
UBQN111
UBQN120
UBQN102
UBQN122
UBQN210
UBQN201
UBQN211
UBQN220
UBQN202
UBQN222
M3.5 Terminal Screw
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
1NC
1NO-1NC
2NO
Momentary
Momentary
6
23
(
47.5 1 or
40
2NC
)
2 blocks
14
44
B: black
G: green
R: red
(
)
70.5 3 or 4 blocks
2NO-2NC
1NO
Panel Thickness 0.8 to 5.5
Square Extended
UBQN2
M3.5 Terminal Screw
Y: yellow
1NC
1NO-1NC
2NO
23
6
(
47.5 1 or
2 blocks)
40
2NC
20
44
(
)
70.5 3 or 4 blocks
2NO-2NC
•ꢀSpecify a button color code in place of in the Part No.
➀
•ꢀRound/square bezel and shroud (metal): Chrome-plated
•ꢀOther contact arrangements and gold-plated silver contacts are also available. See page 20.
(14/03/18)
23
ø30
ø30 Series Pushbuttons
Pushlock Turn Reset / Pushlock Key Reset / Push Turn Lock /
Key ON/OFF Lock / Toggle Lever Pushbuttons
Package Quantity: 1
Button Color
Code
➀
Shape
Contact
Part No.
Dimensions (mm)
Mushroom Pushlock Turn Reset
AVN3
1NO
1NC
AVN310N
➀
➀
➀
➀
➀
➀
Panel Thickness 0.8 to 7.5
M3.5 Terminal Screw
AVN301N
AVN311N
AVN320N
AVN302N
AVN322N
1NO-1NC
2NO
R: red
Y: yellow
23
5.5
40
(
53 1 or
2NC
)
2 blocks
24
(
)
76 3 or 4 blocks
2NO-2NC
1NO
Mushroom Pushlock Key Reset
ABN3K
ABN3K10
ABN3K01
ABN3K11
ABN3K20
ABN3K02
ABN3K22
ABN4K10
ABN4K01
ABN4K11
ABN4K20
ABN4K02
ABN4K22
Panel Thickness 0.8 to 7.5
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
M3.5 Terminal Screw
1NC
B: black
G: green
R: red
1NO-1NC
2NO
23
6
40
Y: yellow
(
53 1 or 2
2NC
)
blocks
23.5
24
(nameplate sold
separately)
(
)
76 3 or 4 blocks
2NO-2NC
1NO
Panel Thickness 0.8 to 7.5
Jumbo Mushtoon Pushlock Key
Reset ABN4K
M3.5 Terminal Screw
1NC
B: black
G: green
R: red
1NO-1NC
2NO
23
6
(
53 1 or 2
2NC
)
blocks
)
76 3 or 4 blocks
23.5
23
2NO-2NC
1NO
(
Pushlock Push Turn Lock
AJN3
AJN310N
AJN301N
AJN311N
AJN320N
AJN302N
AJN322N
ABN510
Panel Thickness 0.8 to 7.5
M3.5 Terminal Screw
1NC
B: black
G: green
R: red
1NO-1NC
2NO
23
5.5
40
Y: yellow
(
53 1 or 2
2NC
)
blocks
24
(
)
76 3 or 4 blocks
2NO-2NC
1NO
Key ON/OFF Lock
ABN5
LOCK
90
Panel Thickness 0.8 to 7.5
M3.5 Terminal Screw
1NC
ABN501
1NO-1NC ABN511
–
23
6
40
2NO
2NC
ABN520
ABN502
(
54 1 or 2
)
blocks
23 23.5
(nameplate sold
separately)
(
)
77 3 or 4 blocks
2NO-2NC ABN522
Toggle Lever
ATN4
1NO
1NC
ATN410
ATN401
M3.5 Terminal Screw
Panel Thickness 0.8 to 5.5
1NO-1NC ATN411
Lever: black
23
6
2NO
2NC
ATN420
ATN402
40
(
44 1 or
2 blocks
)
25
(nameplate sold
separately)
(
)
67 3 or 4 blocks
2NO-2NC ATN422
•ꢀSpecify a button color code in place of in the Part No.
➀
•ꢀRound bezel (metal): Chrome-plated
•ꢀCylinder (metal): Chrome-plated
•ꢀOther contact arrangements and gold-plated silver contacts are also available. See page 20.
•ꢀPushlock Turn Reset: Button is maintained when pressed and is reset when turned clockwise. Red buttons only.
Note: ø30 pushlock turn reset switches cannot be used as emergency stop switches. When emergency stop switches are required, use
XN or HN series emergency stop switches (ISO 13850 and IEC 60947-5-5 compliant).
•ꢀPushlock Key Reset: Button is maintained when pressed and is reset with a key. Key is removable from both depressed and reset posi-
tions. Two keys are supplied.
Note: ø30 pushlock key reset switches cannot be used as emergency stop switches. When emergency stop switches are required, use
HW series emergency stop switches with a HW9Z-A30 ring adapter (ISO 13850 and IEC 60947-5-5 compliant).
•ꢀPush Turn Lock: Button is locked when turned clockwise in the depressed position and is reset when turned counterclockwise.
•ꢀKey ON/OFF Lock: Button can be locked in both depressed and reset positions.
•ꢀToggle Lever: ON and OFF are indicated on the cap.
(14/03/18)
24
ø30
ø30
ø30 Series Pushbuttons
Pull / Push-Pull / Pin Lock Pushbuttons
Package Quantity: 1
Dimensions (mm)
Button Color
Code
➀
Shape
Mushroom Pull
Contact
1NO
Part No.
Panel Thickness 0.8 to 7.5
M3.5 Terminal Screw
ATN2310
➀
➀
➀
➀
➀
➀
➀
➀
ATN23
1NO-1NC
2NO
ATN2311
ATN2320
ATN2302
ATN2111
ATN2120
ATN2102
ATN2122
23
6
40
(nameplate sold
separately)
38.5
(
)
53 1 or 2 blocks
2NC
Mushroom Push-Pull
ATN21
M3.5 Terminal Screw
Panel Thickness 0.8 to 7.5
1NO-1NC
2NO
B: black
G: green
R: red
6
23
2NC
40
Y: yellow
(
53 1 or 2
)
blocks
38.5
(nameplate sold
separately)
2NO-2NC
(
76 3 or 4 blocks)
Mushroom Push-Pull
(Spring Return)
ATN22
Panel Thickness 0.8 to 7.5
M3.5 Terminal Screw
1NO-1NC
2NO-2NC
ATN2211
ATN2222
➀
➀
6
23
40
(
53 1 or 2
)
blocks
38.5
(nameplate
sold separately)
(
)
76 3 or 4 blocks
Panel Thickness 0.8 to 7.5
M3.5 Terminal Screw
Pin Lock
ABN8P
1NO
1NC
ABN8P10
ABN8P01
1NO-1NC
2NO
ABN8P11
–
ABN8P20
23
6
(
44.5 1 or
40
49
2NC
ABN8P02
)
2 blocks
26.5
(nameplate sold
separately)
(
)
67 3 or 4 blocks
2NO-2NC
1NO
ABN8P22
Pin Lock (ON Lock)
ABN8P**-TK231-1
ABN8P10-TK231-1
ABN8P01-TK231-1
ABN8P11-TK231-1
ABN8P20-TK231-1
ABN8P02-TK231-1
ABN8P22-TK231-1
Panel Thickness 0.8 to 7.5
M3.5 Terminal Screw
1NC
1NO-1NC
2NO
–
23
6
(
44 1 or 2
40
49
2NC
)
blocks
25.4
(
)
67 3 or 4 blocks
2NO-2NC
•ꢀSpecify a button color code in place of in the Part No.
➀
•ꢀRound bezel and shroud (metal): Chrome-plated
•ꢀSquare bezel (metal): Chrome-plated
•ꢀOther contact arrangements and gold-plated silver contacts are also available. See page 20.
•ꢀPull: Pulling the button operates the contacts. Up to 2 contact blocks (1 layer) can be mounted on pull switches.
•ꢀPush-Pull: Button is maintained in both depressed and reset positions.
Note: ø30 push pull switches cannot be used as emergency stop switches. When emergency stop switches are required, use XN series
emergency stop switches (ISO 13850 and IEC 60947-5-5 compliant).
•ꢀPush-Pull (Spring Return): Pushing or pulling the button operates the contacts. Button is spring-returned to the center position.
•ꢀPin Lock: Button can be locked in either depressed or reset position by inserting the pin. Pad lock with a ø6mm pin can also be used to
lock the button.
•ꢀPin Lock (ON Lock): Button is locked in the depressed position by inserting the pin. Button cannot be locked in the reset position.
Contact Operation
Push-Pull (Spring Return)
Push-Pull Switch (Maintained)
Pull Switch (Spring Return)
ATN22
ATN21
ATN23
Contact
Contact
Contact
Push
Normal
Pull
Push
Pull
Normal
Pull
1NO-1NC
2NO
1NO-1NC
2NO-2NC
1NO
1NC
2NC
1NO-1NC
2NO
2NO-2NC
2NC
(14/03/18)
25
ø30
ø30 Series Pushbuttons
Square Twin / Twin Maintained Pushbuttons
Package Quantity: 1
Dimensions (mm)
Shape
Contact
Part No.
Button Color
Square Twin (Momentary)
UWQN1
ON
OFF
M3.5 Terminal Screw
Panel Thickness 0.8 to 13
1NO
1NO
UWQN11010
O
N
ON: Black
OFF: Red
OFF
1NO
2NO
1NC
2NC
UWQN11001
UWQN12002
6
23
36
53
(
47 1 or
)
2 blocks
15.5
(
)
70 3 or 4 blocks
(nameplate sold
separately)
Square Twin (Maintained)
UWQN2
ON
OFF
1NO
–
UWQN21000
UWQN20100
UWQN21100
UWQN22000
UWQN20200
Panel Thickness 0.8 to 13
M3.5 Terminal Screw
1NC
–
–
–
–
O N
OFF
ON: Black
OFF: Red
1NO-1NC
2NO
23
6
36
53
)
47 (1 block
70 (2 blocks)
15.5
(nameplate sold
separately)
2NC
Flush Twin Maintained
ABBN11
Top
Bottom
1NO
–
ABBN1110
ABBN1101
ABBN1111
ABBN1120
ABBN1102
ABBN1122
M3.5 Terminal Screw
9
1NC
1NO-1NC
2NO
–
–
–
–
Black (B), green (G),
and red (R) buttons
are supplied with
each unit.
57
80
Panel
Thickness
0.8 to 7.5
40
2NC
(nameplate sold
separately)
2NO-2NC
Top
–
Bottom
–
Mushroom Twin Maintained
(Without buttons)
ABBN33
M3.5 Terminal Screw
1NO
ABBN3310
ABBN3301
ABBN3311
ABBN3320
ABBN3302
ABBN3322
21
1NC
1NO-1NC
2NO
–
–
–
–
–
57
80
40
Panel
Thickness
0.8 to 7.5
2NC
(nameplate sold
separately)
2NO-2NC
•ꢀRound bezel (metal): Chrome-plated
•ꢀOther contact arrangements and gold-plated silver contacts are also available. See page 20.
•ꢀSquare Twin (Momentary): Two independent momentary switches are contained in one unit, each operated by ON or OFF button. With
the ø30 adapter removed from the sleeve, the unit can mount in a ø25.5mm mounting hole for the ø25 series.
•ꢀSquare Twin (Maintained): The contact operates when ON button is pressed and is maintained in the depressed position. The button is
reset by pressing the OFF button.
•ꢀTwin Maintained: The contact operates when the top button is pressed and is maintained in the depressed position. The button is reset by
pressing the bottom button.
Different combinations of flush, extended HW9Z-A30 buttons, and colors are available (ABN1B-*, ABN2B-*). See page 73.
Mushroom buttons for the ABBN33 are ordered separately. Specify the color code (ABN3B-*). See page 73.
(14/03/18)
26
ø30
ø30
ø30 Series Pilot Lights
Dome Pilot Lights
Package Quantity: 1
Applicable Lamp
Lamp Recep-
tacle
Shape
Lamp
Part No.
Lens/LED Color Code
➁
Dome
APN1
APNE1
BA9S
E12
APN199
➁
DNA: amber
C:
O:
S:
clear
orange
blue
G:
R:
W:
green
red
white
See page 75 for
lamps.
Without Lamp
DNY: yellow
APNE199
➁
A:
amber
G:
green
red
white
PW: pure white R:
BA9S
E12
APN1 DN
LSTD-*
LETD-*
LS-*
➂
➁
➁
S:
Y:
blue
yellow
W:
LED
A:
R:
W:
amber
red
G:
S:
Y:
green
blue
APNE1 DN
➂
➁
➁
white
yellow
BA9S
E12
APN1
APN1
➂➁
➂➁
C:
O:
S:
clear
orange
blue
G:
R:
W:
green
red
white
Incandescent
LE-*
Operating Voltage Code
Specify an operating voltage code in place of in the Part No.
➂
Operating Voltage Code
Incandescent (BA9S)
➂
Input
LED
66: 6V AC/DC
11: 12V AC/DC
22: 24V AC/DC
Incandescent (E12)
66: 6V AC/DC
88: 12V AC/DC
33: 24V AC/DC
Full Voltage
16: 100/110V AC
126: 120V AC
26: 200/220V AC
246: 240V AC
386: 380V AC
46: 400/440V AC
16: 100/110V AC
126: 120V AC
26: 200/220V AC
246: 240V AC
386: 380V AC
46: 400/440V AC
486: 480V AC
18: 100/110V AC
128: 120V AC
238: 200/220V AC
248: 240V AC
388: 380V AC
48: 400/440V AC
488: 480V AC
Transformer
16D: 110V DC
DC-DC Converter *
•ꢀSpecify a lens/LED color code in place of in the Part No.
➁
•ꢀUse a white lens for LED pure white illumination (LSTD).
•ꢀUse a pure white LED lamp for yellow illumination.
* DC-DC converter types are not approved by UL and CSA, and not CE compliant (operating voltage 90 to 140V DC).
Dimensions
Full Voltage
Panel Thickness 0.8 to 7.5
M3 Terminal Screw
21.5
23.5
40
Transformer
DC-DC Converter
M3.5 Terminal Screw
Panel Thickness 0.8 to 7.5
All dimensions in mm.
23.5
58.5
40
(14/03/18)
27
ø30
ø30 Series Pilot Lights
Square / Rectangular (Marking) Pilot Lights
Package Quantity: 1
Applicable Lamp
Lamp Recep-
Shape
Lamp
Part No.
Lens/LED Color Code
➁
tacle
Square
UPQN3B
DA: amber
G: green
R: red
C:
O:
S:
clear
orange
blue
See page 75 for
lamps.
Without Lamp BA9S
UPQN3B99
➁
W: white
DY: yellow
A: amber
R: red
G:
S:
Y:
green
blue
LED
BA9S
BA9S
UPQN3B
UPQN3B
D
➂ ➁
LSTD-*
LS-*
➁
W: white
yellow
C: clear
O: orange
S: blue
G:
R:
W:
green
red
white
Incandescent
➂➁
Rectangular (Marking)
UPQN4
DA: amber
O: orange
S: blue
G:
R:
W:
green
red
white
See page 75 for
lamps.
Without Lamp BA9S
UPQN499
➁
DY: yellow
A: amber
R: red
G:
S:
Y:
green
blue
LED
BA9S
BA9S
UPQN4
UPQN4
D
➂ ➁
LSTD-*
LS-*
➁
W: white
yellow
G: green
R: red
W: white
O:
S:
orange
blue
Incandescent
➂➁
Rectangular (Marking)
UPQNE4
UPQN4
DA: amber
O: orange
S: blue
G:
R:
W:
green
red
white
See page 75 for
lamps.
Without Lamp E12
UPQNE499
➁
DY: yellow
A: amber
R: red
G:
S:
Y:
green
blue
LED
E12
E12
UPQNE4
D
➂ ➁
LETD-*
LE-*
➁
W: white
yellow
G: green
R: red
W: white
O:
S:
orange
blue
UPQN4
➂➁
Incandescent
(Note)
Operating Voltage Code
Specify an operating voltage code in place of in the Part No.
➂
Operating Voltage Code
➂
Input Type
LED
Incandescent (BA9S)
Incandescent (E12)
66: 6V AC/DC
88: 12V AC/DC
33: 24V AC/DC
(Note) When ordering 6V, 12V, 24V AC/DC units, specify
"E " before the operating voltage code. UPQN4E
66: 6V AC/DC
11: 12V AC/DC
22: 24V AC/DC
66: 6V AC/DC
88: 12V AC/DC
33: 24V AC/DC
Full Voltage
.
➂➁
16: 100/110V AC
126: 120V AC
26: 200/220V AC
246: 240V AC
386: 380V AC
46: 400/440V AC
16: 100/110V AC
126: 120V AC
26: 200/220V AC
246: 240V AC
386: 380V AC
46: 400/440V AC
486: 480V AC
18: 100/110V AC
128: 120V AC
238: 200/220V AC
248: 240V AC
388: 380V AC
48: 400/440V AC
488: 480V AC
Transformer
16D: 110V DC
DC-DC Converter *
•ꢀSpecify a lens/LED color code in place of in the Part No.
➁
•ꢀUse a pure white LED lamp for yellow illumination (LSTD)
•ꢀOn the rectangular marking pilot light, a clear lens and a color marking plate are used for white illumination.
Marking plate: 24 × 30 mm, 2 mm thick
* DC-DC converter types are not approved by UL and CSA, and not CE compliant (operating voltage 90 to 140V DC).
(14/03/18)
28
ø30
ø30
ø30 Series Pilot Lights
Dimensions
Rectangular Full Voltage
UPQN4
Square Full Voltage
UPQN3B
Rectangular Full Voltage
UPQNE4
Panel Thickness 0.8 to 5.5
Panel Thickness 0.8 to 4.5
M3 Terminal
Screw
M3 Terminal
Screw
Panel Thickness 0.8 to 4.5
M3 Terminal
Screw
23
20
40
44
29.5
10.5
40
44
36.5
10.5
40
Rectangular Transformer
Rectangular Transformer
Square Transformer
Rectangular DC-DC Converter
UPQNE4
Rectangular DC-DC Converter
UPQN4
Square DC-DC Converter
UPQN3B
M3.5 Terminal
Screw
M3.5 Terminal
Screw
M3.5 Terminal
Screw
Panel Thickness 0.8 to 4.5
Panel Thickness 0.8 to 5.5
Panel Thickness 0.8 to 4.5
20
60
66
10.5
40
44
40
44
74
10.5
40
All dimensions in mm.
Reflector
Panel Mounting
1.ꢀTheꢀlampꢀhousingꢀofꢀtheꢀsquareꢀLEDꢀilluminatedꢀpilotꢀ
lightsꢀhasꢀaꢀbuiltinꢀreflector.
1.ꢀTightenꢀtheꢀsquareꢀringꢀtoꢀtheꢀoperatorꢀandꢀpositionꢀtheꢀ
ringꢀcorrectly.
2.ꢀMakeꢀsureꢀthatꢀtheꢀreflectorꢀdoesꢀnotꢀfallꢀoffꢀwhenꢀre
movingꢀtheꢀlensꢀorꢀmarkingꢀplate.
2.ꢀLightlyꢀtightenꢀtheꢀscrewꢀtoꢀsecureꢀtheꢀpilotꢀlightꢀontoꢀtheꢀ
panel.
3.ꢀWhenꢀreplacingꢀtheꢀLEDꢀlampꢀofꢀUPQNE4ꢀ(rectangular),ꢀ
useꢀaꢀlampꢀholderꢀtoolꢀ(OR55).
Screw
4.ꢀToꢀremoveꢀtheꢀreflector,ꢀinsertꢀaꢀflatꢀscrewdriverꢀinsideꢀ
theꢀgrooveꢀofꢀtheꢀreflectorꢀandꢀlightlyꢀpushꢀout.
Groove
Tighten the screw
lightly so that the panel
does not bend.
Recommended
tightening torque: 0.15 N·m
(14/03/18)
29
ø30
ø30 Series Pilot Lights
Incandescent
Push-to-Check Pilot Lights (1W)
Package Quantity: 1
Applicable Lamp
Lamp Recep-
tacle
Shape
Lamp
Part No.
Lens/LED Color Code
➁
Push-to-Check
APN1*P
See page 75 for
lamps.
Without Lamp BA9S
APN199P
➁
C: clear
G: green
O: orange
R: red
S: blue
W: white
Incandescent
BA9S
APN1
P
➂ ➁
LS-*
Operating Voltage Code
Specify an operating voltage code in place of in the Part No.
➂
Input
Operating Voltage Code
➂
66: 6V AC/DC
88: 12V AC/DC
33: 24V AC/DC
Full voltage
16: 100/110V AC
126: 120V AC
26: 200/220V AC
246: 240V AC
386: 380V AC
Transformer
46: 400/440V AC
486: 480V AC
Circuit Example
START
STOP
OLS
M
Note: The lamp of the push-to-check pilot light is not connected to the contact
terminal. To connect, refer to the diagram on the left.
M
L
Push-to-Check
Pilot Light
Dimensions
Push-to-Check
APN1*P
M3 Lamp Terminal Screw
M3.5 Terminal
Screw
Panel Thickness 0.8 to 7.5
M3.5 Terminal Screw
23
A: 62.5
6
40
23.5
B: 96.5
A: Full voltage
B: Transformer
All dimensions in mm.
(14/03/18)
30
ø30
ø30
ø30 Series Illuminated Pushbuttons
LED
Round Extended Illuminated Pushbuttons
Package Quantity: 1
Applicable Lamp
Lamp Recep-
Shape
Operation
Lamp
Contact
Part No.
tacle
Round Extended
ALN2
1NO-1NC
2NO
ALN29911DN
ALN29920DN
ALN29902DN
➁
➁
➁
➁
➁
➁
See page 75 for
lamps.
Without Lamp
AOLN2
ALNE2
AOLNE2
2NC
Momentary
1NO-1NC
2NO
ALN2 11DN
➂
LED
ALN2 20DN
LSTD-*
➁
➂
2NC
ALN2 02DN
➂
BA9S
1NO-1NC
2NO
AOLN29911DN
AOLN29920DN
AOLN29902DN
➁
➁
➁
➁
➁
➁
➁
See page 75 for
lamps.
Without Lamp
LED
2NC
Maintained
Momentary
Maintained
1NO-1NC
2NO
AOLN2 11DN
➂
AOLN2 20DN
LSTD-*
➁
➂
2NC
AOLN2 02DN
➂
1NO-1NC
2NO
ALNE29911DN
See page 75 for
lamps.
Without Lamp
LED
ALNE29920DN
➁
➁
➁
➁
➁
2NC
ALNE29902DN
1NO-1NC
2NO
ALNE2 11DN
➂
ALNE2 20DN
LETD-*
➁
➂
2NC
ALNE2 02DN
➂
E12
1NO-1NC
2NO
AOLNE29911DN
AOLNE29920DN
AOLNE29902DN
➁
➁
➁
➁
➁
➁
See page 75 for
lamps.
Without Lamp
LED
2NC
1NO-1NC
2NO
AOLNE2 11DN
➂
AOLNE2 20DN
LETD-*
➁
➂
2NC
AOLNE2 02DN
➂
Color Code and Operating Voltage Code
Input
➁ Lens/LED Color Code
➂ Operating Voltage Code
Specify a lens/LED color code in place of
.
➁
66: 6V AC/DC
11: 12V AC/DC
22: 24V AC/DC
A: amber
Full voltage
G: green
PW: pure white (LSTD only)
R: red
16: 100/110V AC
126: 120V AC
26: 200/220V AC
246: 240V AC
386: 380V AC
46: 400/440V AC
S: blue
W: white
Transformer
Y: yellow
A pure white LED lamp is used for yellow il-
lumination.
Dimensions
ALN2/AOLN2
ALN2/AOLN2
BA9S/Full Voltage
M3 Terminal M3.5 Terminal
BA9S/Transformer
Screw
Screw
M3.5 Terminal
Screws
Panel Thickness 0.8 to 7.5
Panel Thickness 0.8 to 7.5
23
9
5.5
40
23
40
9
63 (2 blocks) 23.5
86 (4 blocks)
23.5
97.5 (2 blocks)
120.5 (4 blocks)
ALNE2/AOLNE2
E12/Full Voltage
M3 Terminal M3.5 Terminal
ALNE2/AOLNE2
E12/Transformer
Screw
Screw
M3.5 Terminal
Screws
Panel Thickness 0.8 to 7.5
Panel Thickness 0.8 to 7.5
23
23
9
9
5.5
40
40
20
112 (2 blocks)
135 (4 blocks)
77.5 (2 blocks)
100.5 (4 blocks)
20
All dimensions in mm.
(14/03/18)
31
ø30
ø30 Series Illuminated Pushbuttons
Incandescent
Round Extended Illuminated Pushbuttons
Package Quantity: 1
Applicable Lamp
Lamp Recep-
tacle
Shape
Operation
Lamp
Contact
Part No.
Round Extended
ALN
1NO-1NC
2NO
ALN9911
➁
➁
➁
➁
➁
➁
See page 75 for
lamps.
Without Lamp
ALN9920
ALN9902
ALNE
2NC
Momentary
1NO-1NC
2NO
ALN 11
➂
Incandescent
Without Lamp
Incandescent
Without Lamp
Incandescent
Without Lamp
Incandescent
ALN 20
➂
LS-*
2NC
ALN 02
➂
BA9S
1NO-1NC
2NO
AOLN9911
AOLN9920
AOLN9902
➁
➁
➁
➁
➁
➁
➁
See page 75 for
lamps.
2NC
Maintained
Momentary
Maintained
1NO-1NC
2NO
AOLN 11
➂
AOLN 20
➂
LS-*
2NC
AOLN 02
➂
AOLN
AOLNE
1NO-1NC
2NO
ALNE9911
See page 75 for
lamps.
ALNE9920
➁
➁
2NC
ALNE9902
1NO-1NC
2NO
ALN 11
➂
➁
ALN 20
➂
➁
LE-*
2NC
ALN 02
➂
➁
E12
1NO-1NC
2NO
AOLNE9911
AOLNE9920
AOLNE9902
➁
➁
➁
See page 75 for
lamps.
2NC
1NO-1NC
2NO
AOLN 11
➂
➁
AOLN 20
➂
➁
➁
LE-*
2NC
AOLN 02
➂
Color Code and Operating Voltage Code
Specify a code in place of or in the Part No.
➁
➂
➂ Operating Voltage Code
Input
➁ Lens Color Code
Incandescent (BA9S)
Incandescent (E12)
Specify a lens color code in place of
.
➁
66: 6V AC/DC
88: 12V AC/DC
33: 24V AC/DC
E66: 6V AC/DC
E88: 12V AC/DC
E33: 24V AC/DC
Full voltage
C: clear
G: green
O: orange
R: red
S: blue
W: white
16: 100/110V AC
126: 120V AC
26: 200/220V AC
246: 240V AC
386: 380V AC
18: 100/110V AC
128: 120V AC
238: 200/220V AC
248: 240V AC
388: 380V AC
Transformer
46: 400/440V AC
486: 480V AC
48: 400/440V AC
488: 480V AC
Dimensions
ALN Momentary
BA9S/Full Voltage
ALN Momentary
BA9S/Transformer
AOLN Maintained
BA9S/Full Voltage
AOLN Maintained
BA9S/Transformer
M3.5 Terminal
Screw
M3.5 Terminal
M3 Terminal
Screw
Screw
M3 Terminal
Screw
M3.5 Terminal
Screws
M3.5 Terminal
Screws
Panel Thickness
0.8 to 7.5
Panel Thickness
0.8 to 7.5
Panel Thickness
0.8 to 7.5
Panel Thickness 0.8 to 7.5
23
23
23
6
23
6
40
62.5 (2 blocks)
85.5 (4 blocks)
18.5
84.5 (2 blocks)
107.5 (4 blocks)
18.5
18.5
18.5
118.5 (2 blocks)
141.5 (4 blocks)
96.5 (2 blocks)
119.5 (4 blocks)
ALNE Momentary
E12/Full Voltage
AOLNE Maintained
E12/Transformer
AOLNE Maintained
E12/Full Voltage
ALNE Momentary
E12/Transformer
M3.5 Terminal
M3 Terminal
Screw
Screw
M3.5 Terminal
Screw
M3.5 Terminal
Screws
M3 Terminal
Screw
Panel Thickness
0.8 to 7.5
Panel Thickness
0.8 to 7.5
Panel Thickness
0.8 to 7.5
M3.5 Terminal Screws
Panel Thickness 0.8 to 7.5
23
23
23
6
23
6
40
69.5 (2 blocks)
92.5 (4 blocks)
91.5 (2 blocks)
114.5 (4 blocks)
18.5
18.5
125.5 (2 blocks)
148.5 (4 blocks)
18.5
18.5
103.5 (2 blocks)
126.5 (4 blocks)
(14/03/18)
32
ø30
ø30
ø30 Series Illuminated Pushbuttons
LED
Round Extended with Half Shroud Illuminated Pushbuttons
Package Quantity: 1
Lamp Recep-
tacle
Shape
Operation
Lamp
Contact
Part No.
Applicable Lamp
Round Extended
ALGN2
1NO-1NC
2NO
ALGN29911DN
ALGN29920DN
ALGN29902DN
➁
➁
➁
➁
➁
➁
See page 75 for
lamps.
Without Lamp
AOLGN2
ALGNE2
AOLGNE2
2NC
Momentary
1NO-1NC
2NO
ALGN2 11DN
➂
LED
ALGN2 20DN
➂
LSTD-*
➁
2NC
ALGN2 02DN
➂
BA9S
1NO-1NC
2NO
AOLGN29911DN
AOLGN29920DN
AOLGN29902DN
➁
➁
➁
➁
➁
➁
➁
See page 75 for
lamps.
Without Lamp
LED
2NC
Maintained
Momentary
Maintained
1NO-1NC
2NO
AOLGN2 11DN
➂
AOLGN2 20DN
➂
LSTD-*
➁
2NC
AOLGN2 02DN
➂
1NO-1NC
2NO
ALGNE29911DN
See page 75 for
lamps.
Without Lamp
LED
ALGNE29920DN
➁
➁
➁
➁
➁
2NC
ALGNE29902DN
1NO-1NC
2NO
ALGNE2 11DN
➂
ALGNE2 20DN
➂
LETD-*
➁
2NC
ALGNE2 02DN
➂
E12
1NO-1NC
2NO
AOLGNE29911DN
AOLGNE29920DN
AOLGNE29902DN
➁
➁
➁
➁
➁
➁
See page 75 for
lamps.
Without Lamp
LED
2NC
1NO-1NC
2NO
AOLGNE2 11DN
➂
AOLGNE2 20DN
➂
LETD-*
➁
2NC
AOLGNE2 02DN
➂
Color Code and Operating Voltage Code
Specify a code in place of or in the Part No.
➁
➂
Input
➁ Lens/LED Color Code
➂ Operating Voltage Code
Specify a lens/LED color code in place of
.
➁
66: 6V AC/DC
11: 12V AC/DC
22: 24V AC/DC
Full voltage
A: amber
G: green
PW: pure white (LSTD only)
R: red
16: 100/110V AC
126: 120V AC
26: 200/220V AC
246: 240V AC
386: 380V AC
46: 400/440V AC
S: blue
W: white
Y: yellow
Transformer
Use a pure white LED lamp for yellow illumina-
tion
Dimensions
ALGN2/AOLGN2
BA9S/Full Voltage
ALGN2/AOLGN2
BA9S/Transformer
M3.5 Terminal
Screws
M3.5 Terminal Screw
Panel Thickness 0.8 to 3.5
Panel Thickness 0.8 to 3.5
M3 Terminal Screw
23
23
5.5
40
40
27.5
59.5 (2 blocks)
82.5 (4 blocks)
27.5
94 (2 blocks)
117 (4 blocks)
ALGNE2/AOLGNE2
E12/Full Voltage
ALGNE2/AOLGNE2
E12/Transformer
M3.5 Terminal
Screws
M3.5 Terminal Screw
Panel Thickness 0.8 to 3.5
Panel Thickness 0.8 to 3.5
M3 Terminal Screw
23
23
5.5
40
40
23.5
23.5
74 (2 blocks)
97 (4 blocks)
108.5 (2 blocks)
131.5 (4 blocks)
All dimensions in mm.
(14/03/18)
33
ø30
ø30 Series Illuminated Pushbuttons
Incandescent
Round Extended with Half Shroud Illuminated Pushbuttons
Package Quantity: 1
Lamp Recep-
tacle
Shape
Operation
Lamp
Contact
Part No.
Applicable Lamp
Round Extended
1NO-1NC
2NO
ALN9G911
➁
➁
➁
ALNG
See page 75 for
lamps.
Without Lamp
ALN9G920
ALN9G902
ALNEG
2NC
BA9S
Momentary
1NO-1NC
2NO
ALN 11
➂
➁
➁
➁
Incandescent
Without Lamp
Incandescent
ALN 20
➂
LS-*
2NC
ALN 02
➂
1NO-1NC
2NO
ALNE9G911
ALNE9G920
ALNE9G902
➁
➁
➁
See page 75 for
lamps.
2NC
E12
Momentary
1NO-1NC
2NO
ALN 11
➂
➁
➁
➁
ALN 20
➂
LE-*
2NC
ALN 02
➂
Color Code and Operating Voltage Code
Specify a code in place of in the Part No.
➁ or ➂
➂ Operating Voltage Code
Input
➁ Lens Color Code
Incandescent (BA9S)
Incandescent (E12)
Specify a lens color code in place of
.
➁
6G6: 6V AC/DC
8G8: 12V AC/DC
3G3: 24V AC/DC
E6G6: 6V AC/DC
E8G8: 12V AC/DC
E3G3: 24V AC/DC
Full voltage
C: clear
G: green
O: orange
R: red
S: blue
W: white
1G6: 100/110V AC
12G6: 120V AC
2G6: 200/220V AC
24G6: 240V AC
38G6: 380V AC
1G8: 100/110V AC
12G8: 120V AC
2G8: 200/220V AC
24G8: 240V AC
38G8: 380V AC
Transformer
4G6: 400/440V AC
48G6: 480V AC
4G8: 400/440V AC
48G8: 480V AC
Dimensions
ALN*G Momentary
BA9S/Full Voltage
ALN*G Momentary
BA9S/Transformer
M3.5 Terminal
Screws
M3.5 Terminal Screw
Panel Thickness 0.8 to 4
Panel Thickness 0.8 to 4
M3 Terminal Screw
23
23
6
40
40
23
23
58 (2 blocks)
81 (4 blocks)
92 (2 blocks)
115 (4 blocks)
ALNE*G Momentary
ALNE*G Momentary
E16/Transformer
M3.5 Terminal
Screws
E16/Full Voltage
M3.5 Terminal Screw
Panel Thickness 0.8 to 4
Panel Thickness 0.8 to 4
M3 Terminal Screw
23
23
6
40
40
23
65 (2 blocks)
88 (4 blocks)
23
99 (2 blocks)
122 (4 blocks)
All dimensions in mm.
(14/03/18)
34
ø30
ø30
ø30 Series Illuminated Pushbuttons
LED
Round Extended with Full Shroud Illuminated Pushbuttons
Package Quantity: 1
Lamp Recep-
tacle
Shape
Operation
Lamp
Contact
Part No.
Applicable Lamp
Round Extended
ALFN2
AOLFN2
ALFNE2
AOLFNE2
1NO-1NC
2NO
ALFN29911DN
ALFN29920DN
ALFN29902DN
➁
➁
➁
➁
➁
➁
See page 75 for
lamps.
Without Lamp
2NC
Momentary
1NO-1NC
2NO
ALFN2 11DN
➂
LED
ALFN2 20DN
➂
LSTD-*
➁
2NC
ALFN2 02DN
➂
BA9S
1NO-1NC
2NO
AOLFN29911DN
AOLFN29920DN
AOLFN29902DN
➁
➁
➁
➁
➁
➁
➁
See page 75 for
lamps.
Without Lamp
LED
2NC
Maintained
Momentary
Maintained
1NO-1NC
2NO
AOLFN2 11DN
➂
AOLFN2 20DN
➂
LSTD-*
➁
2NC
AOLFN2 02DN
➂
1NO-1NC
2NO
ALFNE29911DN
See page 75 for
lamps.
Without Lamp
LED
ALFNE29920DN
➁
➁
➁
➁
➁
2NC
ALFNE29902DN
1NO-1NC
2NO
ALFNE2 11DN
➂
ALFNE2 20DN
➂
LETD-*
➁
2NC
ALFNE2 02DN
➂
E12
1NO-1NC
2NO
AOLFNE29911DN
AOLFNE29920DN
AOLFNE29902DN
➁
➁
➁
➁
➁
➁
See page 75 for
lamps.
Without Lamp
LED
2NC
1NO-1NC
2NO
AOLFNE2 11DN
➂
AOLFNE2 20DN
➂
LETD-*
➁
2NC
AOLFNE2 02DN
➂
Color Code and Operating Voltage Code
Specify a code in place of or in the Part No.
➁
➂
➁ Lens/LED Color Code
LED
Input
➂ Operating Voltage Code
Specify a lens/LED color code in place of
.
➁
66: 6V AC/DC
11: 12V AC/DC
22: 24V AC/DC
Full voltage
A: amber
G: green
PW: pure white (LSTD only)
R: red
16: 100/110V AC
126: 120V AC
26: 200/220V AC
246: 240V AC
386: 380V AC
46: 400/440V AC
S: blue
W: white
Y: yellow
Transformer
Use a pure white LED lamp for yellow illumina-
tion
Dimensions
ALFN2/AOLFN2
ALFN2/AOLFN2
BA9S/Transformer
BA9S/Full Voltage
M3.5 Terminal
Screws
M3.5 Terminal Screw
Panel Thickness 0.8 to 5.5
M3 Terminal
Screw
Panel Thickness 0.8 to 5.5
23
23
5.5
40
40
25
25
61.5 (2 blocks)
84.5 (4 blocks)
96 (2 blocks)
119 (4 blocks)
ALFNE2/AOLFNE2
E12/Full Voltage
ALFNE2/AOLFNE2
E12/Transformer
M3.5 Terminal Screw
M3.5 Terminal
Screws
Panel Thickness 0.8 to 6
Panel Thickness 0.8 to 6
M3 Terminal Screw
23
23
5
40
40
21
76.5 (2 blocks)
99.5 (4 blocks)
21
111 (2 blocks)
134 (4 blocks)
All dimensions in mm.
(14/03/18)
35
ø30
ø30 Series Illuminated Pushbuttons
Incandescent
Round Extended with Full Shroud Illuminated Pushbuttons
Package Quantity: 1
Lamp Recep-
tacle
Shape
Operation
Lamp
Contact
Part No.
Applicable Lamp
Round Extended
1NO-1NC
2NO
ALN9F911
➁
➁
➁
ALNF
See page 75 for
lamps.
Without Lamp
ALN9F920
ALN9F902
ALNEF
2NC
Momentary
1NO-1NC
2NO
ALN 11
➂
➁
Incandescent
Without Lamp
Incandescent
Without Lamp
Incandescent
Without Lamp
Incandescent
ALN 20
➂
➁
➁
LS-*
2NC
ALN 02
➂
BA9S
1NO-1NC
2NO
AOLN9F911
AOLN9F920
AOLN9F902
➁
➁
➁
See page 75 for
lamps.
2NC
Maintained
Momentary
Maintained
1NO-1NC
2NO
AOLN 11
➂
➁
AOLN 20
➂
➁
➁
LS-*
2NC
AOLN 02
➂
AOLNF
AOLNEF
1NO-1NC
2NO
ALNE9F911
ALNE9F920
ALNE9F902
➁
➁
➁
See page 75 for
lamps.
2NC
1NO-1NC
2NO
ALN 11
➂
➁
➁
➁
ALN 20
➂
LE-*
2NC
ALN 02
➂
E12
1NO-1NC
2NO
AOLNE9F911
AOLNE9F920
AOLNE9F902
➁
➁
➁
See page 75 for
lamps.
2NC
1NO-1NC
2NO
AOLN 11
➂
➁
➁
➁
AOLN 20
➁
LE-*
2NC
AOLN 02
➂
Color Code and Operating Voltage Code
Specify a code in place of or in the Part No.
➁
➂
➂ Operating Voltage Code
Input
➁ Lens Color Code
Incandescent (BA9S)
Incandescent (E12)
Specify a lens color code in place of
.
➁
6F6: 6V AC/DC
8F8: 12V AC/DC
3F3: 24V AC/DC
E6F6: 6V AC/DC
E8F8: 12V AC/DC
E3F3: 24V AC/DC
Full voltage
C: clear
G: green
O: orange
R: red
S: blue
W: white
1F6: 100/110V AC
12F6: 120V AC
2F6: 200/220V AC
24F6: 240V AC
38F6: 380V AC
1F8: 100/110V AC
12F8: 120V AC
2F8: 200/220V AC
24F8: 240V AC
38F8: 380V AC
Transformer
4F6: 400/440V AC
48F6: 480V AC
4F8: 400/440V AC
48F8: 480V AC
Dimensions
AOLN*F Maintained
ALN*F Momentary
ALN*F Momentary
ALON*F Maintained
BA9S/Transformer
BA9S/Full Voltage
BA9S/Full Voltage
BA9S/Transformer
All dimensions in mm.
M3.5 Terminal
Screw
M3.5ꢀTerminal
Screw
M3.5 Terminal
Screws
PanelꢀThickness
0.8ꢀtoꢀ5
M3ꢀTerminal
Panel Thickness
0.8 to 5
M3 Terminal
Screw
Panel Thickness 0.8 to 5
Screw
M3.5 Terminal
Screws
Panel Thickness
0.8 to 5
23
23
82ꢀ(2ꢀblocks)
105ꢀ(4ꢀblocks)
6
23
6
40
21
21
21
116 (2 blocks)
139 (4 blocks)
60 (2 blocks)
83 (4 blocks)
23
21
94 (2 blocks)
117 (4 blocks)
AOLNE*F Maintained
E12/Full Voltage
M3.5ꢀTerminal
ALNE*F Momentary
E12/Full Voltage
M3.5ꢀTerminal
AOLN*F Maintained
ALN*F Momentary
E12/Transformer
E12/Transformer
M3.5 Terminal
Screws
M3.5 Terminal
Screws
Panel Thickness
0.8 to 5
PanelꢀThickness
0.8ꢀtoꢀ5
PanelꢀThickness
0.8ꢀtoꢀ5
M3ꢀTerminal
Screw
Screw
M3ꢀTerminal
Screw
Screw
Panel Thickness 0.8 to 5
23
23
23
23
6
6
40
21
21
67ꢀ(2ꢀblocks)
90ꢀ(4ꢀblocks)
21
89ꢀ(2ꢀblocks)
112ꢀ(4ꢀblocks)
21
101 (2 blocks)
124 (4 blocks)
123 (2 blocks)
146 (4 blocks)
(14/03/18)
36
ø30
ø30
ø30 Series Illuminated Pushbuttons
LED
Mushroom (ø40) Illuminated Pushbuttons
Package Quantity: 1
Applicable Lamp
Lamp Recep-
Shape
Operation
Lamp
Contact
Part No.
tacle
ø40 Mushroom
ALN3
1NO-1NC
2NO
ALN39911DN
ALN39920DN
ALN39902DN
➁
➁
➁
➁
➁
➁
See page 75 for
lamps.
Without Lamp
AOLN3
ALNE3
AOLNE3
2NC
Momentary
1NO-1NC
2NO
ALN3 11DN
➂
LED
ALN3 20DN
➂
LSTD-*
➁
2NC
ALN3 02DN
➂
BA9S
1NO-1NC
2NO
AOLN39911DN
AOLN39920DN
AOLN39902DN
➁
➁
➁
➁
➁
➁
➁
See page 75 for
lamps.
Without Lamp
LED
2NC
Maintained
Momentary
Maintained
1NO-1NC
2NO
AOLN3 11DN
➂
AOLN3 20DN
➂
LSTD-*
➁
2NC
AOLN3 02DN
➂
1NO-1NC
2NO
ALNE39911DN
See page 75 for
lamps.
Without Lamp
LED
ALNE39920DN
➁
➁
➁
➁
➁
2NC
ALNE39902DN
1NO-1NC
2NO
ALNE3 11DN
➂
ALNE3 20DN
➂
LETD-*
➁
2NC
ALNE3 02DN
➂
E12
1NO-1NC
2NO
AOLNE39911DN
AOLNE39920DN
AOLNE39902DN
➁
➁
➁
➁
➁
➁
See page 75 for
lamps.
Without Lamp
LED
2NC
1NO-1NC
2NO
AOLNE3 11DN
➂
AOLNE3 20DN
➂
LETD-*
➁
2NC
AOLNE3 02DN
➂
Color Code and Operating Voltage Code
Specify a code in place of or in the Part No.
➁
➂
Input
➁ Lens/LED Color Code
➂ Operating Voltage Code
Specify a lens/LED color code in place of
.
➁
66: 6V AC/DC
11: 12V AC/DC
22: 24V AC/DC
Full voltage
A: amber
G: green
R: red
S: blue
W: white
Y: yellow
16: 100/110V AC
126: 120V AC
26: 200/220V AC
246: 240V AC
386: 380V AC
46: 400/440V AC
Transformer
Use a pure white LED lamp for yellow illumina-
tion (LSTD only)
Dimensions
ALN3/AOLN3
ALN3/AOLN3
BA9S/Transformer
BA9S/Full Voltage
M3.5 Terminal
Screws
M3.5 Terminal Screw
Panel Thickness 0.8 to 7.5
Panel Thickness 0.8 to 7.5
M3 Terminal Screw
23
23
5.5
40
40
23.5
63 (2 blocks)
86 (4 blocks)
23.5
97.5 (2 blocks)
120.5 (4 blocks)
ALNE3/AOLNE3
E12/Transformer
ALNE3/AOLNE3
E12/Full Voltage
M3.5 Terminal
Screws
M3.5 Terminal Screw
Panel Thickness 0.8 to 7.5
Panel Thickness 0.8 to 7.5
M3 Terminal Screw
23
23
5.5
40
40
20
20
112 (2 blocks)
135 (4 blocks)
77.5 (2 blocks)
100.5 (4 blocks)
All dimensions in mm.
(14/03/18)
37
ø30
ø30 Series Illuminated Pushbuttons
Incandescent
Square and Rectangular Extended Illuminated Pushbuttons
Package Quantity: 1
Lamp Recep-
tacle
Shape
Operation
Lamp
Contact
Part No.
Applicable Lamp
Square Extended
ULQN
1NO-1NC
2NO
ULQN9911
➁
➁
➁
➁
➁
➁
See page 75 for
lamps.
Without Lamp
ULQN9920
ULQN9902
2NC
Momentary
1NO-1NC
2NO
ULQN 11
➂
Incandescent
Without Lamp
Incandescent
Without Lamp
Incandescent
Without Lamp
Incandescent
ULQN 20
➂
LS-*
2NC
ULQN 02
➂
BA9S
1NO-1NC
2NO
UOLQN9911
UOLQN9920
UOLQN9902
UOLQN
➁
➁
➁
➁
➁
➁
See page 75 for
lamps.
2NC
Maintained
Momentary
Maintained
1NO-1NC
2NO
UOLQN 11
➂
UOLQN 20
➂
LS-*
2NC
UOLQN 02
➂
Rectangular (Marking)
ULQNB
1NO-1NC
2NO
ULQN9B911
ULQN9B920
ULQN9B902
➁
➁
➁
See page 75 for
lamps.
2NC
1NO-1NC
2NO
ULQN 11
➂
➁
ULQN 20
➂
➁
LS-*
2NC
ULQN 02
➂
➁
BA9S
1NO-1NC
2NO
UOLQN9B911
UOLQN9B920
UOLQN9B902
➁
➁
➁
UOLQNB
See page 75 for
lamps.
2NC
1NO-1NC
2NO
UOLQN 11
➂
➁
UOLQN 20
➂
➁
➁
LS-*
2NC
UOLQN 02
➂
Color Code and Operating Voltage Code
Specify a code in place of or in the Part No.
➁
➂
Operating Voltage Code
➂
Input
Lens Color Code
➁
Square Extended
Rectangular Marking
66: 6V AC/DC
88: 12V AC/DC
33: 24V AC/DC
6B6: 6V AC/DC
8B8: 12V AC/DC
3B3: 24V AC/DC
Specify a lens color code in place of
.
➁
Full voltage
C: clear (square units only)
G: green
16: 100/110V AC
126: 120V AC
26: 200/220V AC
246: 240V AC
386: 380V AC
1B6: 100/110V AC
12B6: 120V AC
2B6: 200/220V AC
24B6: 240V AC
38B6: 380V AC
O: orange
R: red
S: blue
Transformer
W: white
46: 400/440V AC
486: 480V AC
4B6: 400/440V AC
48B6: 480V AC
Clear lens is not available for rectangular units.
Dimensions
UOLQN Maintained BA9S/
Transformer
ULQN Momentary
BA9S/Full Voltage
M3.5 Terminal
ULQN Momentary
BA9S/Transformer
UOLQN Maintained
BA9S/Full Voltage
M3.5 Terminal
Panel Thickness
0.8 to 3.2
Panel Thickness
0.8 to 3.2
Panel Thickness
0.8 to 3.2
Screw
Panel Thickness
0.8 to 3.2
M3.5 Terminal
Screws
Screws
M3.5 Terminal
Screws
M3 Terminal
M3 Terminal
Screw
Screw
14
23
14
23
14
23
6
23
6
14
40
44
20
20
64 (2 blocks)
86 (2 blocks)
109 (4 blocks)
20
20
120 (2 blocks)
143 (4 blocks)
98 (2 blocks)
121 (4 blocks)
87 (4 blocks)
ULQN*B Momentary
BA9S/Full Voltage
M3.5 Terminal
ULQN*B Momentary
UOLQN*B Maintained
UOLQN*B Maintained
BA9S/Transformer
BA9S/Full Voltage
BA9S/Transformer
M3.5 Terminal
Screw
M3 Terminal
Screw
Panel Thickness
0.8 to 3.2
Screws
Panel Thickness
0.8 to 3.2
Panel Thickness
0.8 to 3.2
M3.5 Terminal
Screws
M3.5 Terminal
Screws
M3 Terminal
Panel Thickness 0.8 to 3.2
Screw
23
23
23
6
23
6
44
25
25
64 (2 blocks)
87 (4 blocks)
86 (2 blocks)
109 (4 blocks)
25
25
120 (2 blocks)
143 (4 blocks)
98 (2 blocks)
121 (4 blocks)
All dimensions in mm.
(14/03/18)
38
ø30
ø30
ø30 Series Illuminated Pushbuttons
Incandescent
Push Turn Lock Illuminated Pushbuttons
Package Quantity: 1
Applicable Lamp
Lamp Recep-
Shape
Operation
Lamp
Contact
Part No.
tacle
ALNL
1NO-1NC
2NO
ALN9L911
➁
➁
➁
See page 75 for
lamps.
Without Lamp
ALN9L920
ALN9L902
2NC
BA9S
Push Turn Lock
1NO-1NC
2NO
ALN 11
➂
➁
Incandescent
ALN 20
➂
➁
LS-*
2NC
ALN 02
➂
➁
Color Code and Operating Voltage Code
Specify a code in place of or in the Part No.
➁
➂
Input
Lens Color Code
Operating Voltage Code
➂
➁
Specify a lens color code in place of
.
➁
6L6: 6V AC/DC
8L8: 12V AC/DC
3L3: 24V AC/DC
Full voltage
G: green
O: orange
R: red
S: blue
W: white
1L6: 100/110V AC
12L6: 120V AC
2L6: 200/220V AC
24L6: 240V AC
38L6: 380V AC
Transformer
4L6: 400/440V AC
48L6: 480V AC
•ꢀPush Turn Lock: Knob is maintained when turned clockwise in the depressed position and is reset when turned counterclockwise.
Dimensions
ALN*L
BA9S/Full Voltage
ALN*L
BA9S/Transformer
M3.5 Terminal Screw
Panel Thickness 0.8 to 5
M3.5 Terminal
Screws
Panel Thickness 0.8 to 5
M3 Terminal Screw
23
6
23
40
40
25
67 (2 blocks)
90 (4 blocks)
25
101 (2 blocks)
124 (4 blocks)
All dimensions in mm.
(14/03/18)
39
ø30
ø30 Series Illuminated Pushbuttons
LED
Pushlock Turn Reset/Push Turn Lock Illuminated Pushbuttons
Package Quantity: 1
Lamp Recep-
tacle
Shape
Operation
Lamp
Contact
Part No.
Applicable Lamp
ø40 Mushroom
Pushlock Turn Reset
AVLN3
1NO-1NC
2NO
AVLN39911DNR
AVLN39920DNR
AVLN39902DNR
See page 75 for
lamps.
Without Lamp
AVLNE3
2NC
Pushlock Turn
Reset
BA9S
1NO-1NC
2NO
AVLN3 11DNR
➂
LED
AVLN3 20DNR
LSTD-*
➁
➂
2NC
AVLN3 02DNR
➂
1NO-1NC
2NO
AVLNE39911DNR
AVLNE39920DNR
AVLNE39902DNR
See page 75 for
lamps.
Without Lamp
LED
2NC
Pushlock Turn
Reset
E12
1NO-1NC
2NO
AVLNE3 11DNR
➂
AVLNE3 20DNR
LETD-*
➁
➂
2NC
AVLNE3 02DNR
➂
ø40 Mushroom
Push Turn Lock
AJLN3
1NO-1NC
2NO
AJLN39911DN
AJLN39920DN
AJLN39902DN
➁
➁
➁
➁
➁
➁
See page 75 for
lamps.
Without Lamp
2NC
BA9S
Push Turn Lock
1NO-1NC
2NO
AJLN3 11DN
➂
LED
AJLN3 20DN
LSTD-*
➂
➁
2NC
AJLN3 02DN
➂
Color Code and Operating Voltage Code
Specify a code in place of or in the Part No.
➁
➂
Input
➁ Lens/LED Color Code
➂ Operating Voltage Code
66: 6V AC/DC
11: 12V AC/DC
22: 24V AC/DC
Specify a lens/LED color code in place of
.
➁
Full voltage
A: amber
G: green
R: red
W: white
Y: yellow
16: 100/110V AC
126: 120V AC
26: 200/220V AC
246: 240V AC
386: 380V AC
46: 400/440V AC
Transformer
•ꢀPushlock Turn Reset: Lens is maintained when pressed and is reset when turned clockwise. Red lens only.
Note: AVNL3 and AVNLE3 pushlock turn reset switches cannot be used as emergency stop switches. When emergency stop switches are
required, use XN or HN series emergency stop switches (ISO 13850 and IEC 60947-5-5 compliant).
•ꢀPush Turn Lock: Lens is maintained when turned clockwise in the depressed position and is reset when turned counterclockwise.
Dimensions
AVLNE3
E12/Full Voltage
AVLN3
AVLN3
BA9S/Transformer
AVLNE3
E12/Transformer
BA9S/Full Voltage
M3.5 Terminal
M3.5 Terminal
Screw
M3 Terminal
Screw
M3.5 Terminal
Screws
Panel Thickness
0.8 to 7.5
M3.5 Terminal
Screws
Panel Thickness
0.8 to 7.5
Panel Thickness
0.8 to 7.5
M3 Terminal
Screw
Screw
Panel Thickness 0.8 to 7.5
23
23
23
5.5
23
5.5
40
23.5
63 (2 blocks)
86 (4 blocks)
97.5 (2 blocks)
120.5 (4 blocks)
23.5
20
20
77.5 (2 blocks)
100.5 (4 blocks)
112 (2 blocks)
135 (4 blocks)
AJLN3
AJLN3
BA9S/Transformer
BA9S/Full Voltage
M3.5 Terminal
M3 Terminal
Screw
M3.5ꢀTerminal
Screws
Panel Thickness
0.8 to 7.5
Screw
PanelꢀThicknessꢀ0.8ꢀtoꢀ7.5
23
23
5.5
40
23.5
23.5
63 (2 blocks)
86 (4 blocks)
97.5ꢀ(2ꢀblocks)
120.5ꢀ(4ꢀblocks)
All dimensions in mm.
(14/03/18)
40
ø30
ø30
ø30 Series Illuminated Pushbuttons
Incandescent
Pushlock Turn Reset/Push Turn Lock Illuminated Pushbuttons
Package Quantity: 1
Lamp Recep-
tacle
Shape
Operation
Lamp
Contact
Part No.
Applicable Lamp
ø40 Mushroom
Pushlock Turn Reset
AVLN3
1NO-1NC
2NO
AVLN39911NR
AVLN39920NR
AVLN39902NR
See page 75 for
lamps.
Without Lamp
AVLNE3
2NC
Pushlock Turn
Reset
BA9S
1NO-1NC
2NO
AVLN3 11NR
➂
Incandescent
Without Lamp
Incandescent
AVLN3 20NR
➂
LS-*
2NC
AVLN3 02NR
➂
1NO-1NC
2NO
AVLNE39911NR
AVLNE39920NR
AVLNE39902NR
See page 75 for
lamps.
2NC
Pushlock Turn
Reset
E12
1NO-1NC
2NO
AVLNE3 11NR
➂
AVLNE3 20NR
➂
LE-*
2NC
AVLNE3 02NR
➂
ø40 Mushroom
Push Turn Lock
AJLN3
1NO-1NC
2NO
AJLN39911N
AJLN39920N
AJLN39902N
➁
➁
➁
➁
➁
➁
See page 75 for
lamps.
Without Lamp
Incandescent
2NC
BA9S
Push Turn Lock
1NO-1NC
2NO
AJLN3 11N
➂
AJLN3 20N
➂
LS-*
2NC
AJLN3 02N
➂
Color Code and Operating Voltage Code
Specify a code in place of or in the Part No.
➁
➂
➂ Operating Voltage Code
Input
➁ Lens Color Code
Incandescent (BA9S)
Incandescent (E12)
66: 6V AC/DC
88: 12V AC/DC
33: 24V AC/DC
Specify a lens color code in place of
Part No.
in the
➁
Full voltage
G: green
O: orange
R: red
16: 100/110V AC
126: 120V AC
26: 200/220V AC
246: 240V AC
386: 380V AC
18: 100/110V AC
128: 120V AC
238: 200/220V AC
248: 240V AC
388: 380V AC
Transformer
46: 400/440V AC
486: 480V AC
48: 400/440V AC
488: 480V AC
•ꢀPushlock Turn Reset: Lens is maintained when pressed and is reset when turned clockwise. Red lens only.
Note: AVNL3 and AVNLE3 pushlock turn reset switches cannot be used as emergency stop switches. When emergency stop switches
are required, use XN or HN series emergency stop switches (ISO 13850 and IEC 60947-5-5 compliant).
•ꢀPush Turn Lock: Lens is maintained when turned clockwise in the depressed position and is reset when turned counterclockwise.
Dimensions
AVLNE3
E12/Full Voltage
AVLN3
AVLN3
BA9S/Transformer
AVLNE3
E12/Transformer
BA9S/Full Voltage
M3.5 Terminal
M3.5 Terminal
Screw
M3 Terminal
Screw
M3.5 Terminal
Screws
Panel Thickness
0.8 to 7.5
M3.5 Terminal
Screws
Panel Thickness
0.8 to 7.5
Panel Thickness
0.8 to 7.5
M3 Terminal
Screw
Screw
Panel Thickness 0.8 to 7.5
23
23
23
5.5
23
5.5
40
23.5
63 (2 blocks)
86 (4 blocks)
97.5 (2 blocks)
120.5 (4 blocks)
23.5
20
20
77.5 (2 blocks)
100.5 (4 blocks)
112 (2 blocks)
135 (4 blocks)
AJLN3
BA9S/Full Voltage
AJLN3
BA9S/Transformer
M3.5 Terminal
M3 Terminal
Screw
M3.5ꢀTerminal
Screws
Panel Thickness
0.8 to 7.5
Screw
PanelꢀThicknessꢀ0.8ꢀtoꢀ7.5
23
23
5.5
40
23.5
23.5
63 (2 blocks)
86 (4 blocks)
97.5ꢀ(2ꢀblocks)
120.5ꢀ(4ꢀblocks)
All dimensions in mm.
(14/03/18)
41
ø30
ø30 Series Selector Switches
ASN Selector Switches (Knob Operator)
90° 2-position
Package Quantity: 1
ASN
4
•ꢀKnob: Black
Shape
2
•ꢀRound bezel (metal): Chrome-plated
•ꢀUnits marked with and part numbers with
"-T" differ in shape.
See page 48 for dimensions.
3
1
Contact Arrangement Chart
•ꢀNameplates are ordered separately.
Spring Return
from Right
Spring Return
Contact Block
Operator Position
Maintained
Maintained
from Left
Contact
Code
L
R
L
R
L
R
L
R
Mounting
Position
Contact
L
R
●
●
NO
Dummy
NO
NC
NO
NO
NO
NC
NO
NC
NO
NC
NO
Dummy
NO
NC
NO
NO
NO
NC
NO
NC
NO
NC
1
2
1
2
1
2
1
2
3
4
1
2
1
2
1
2
1
2
1
2
3
4
1
2
10
ASN310
ASN311
ASN320
ASN410
ASN411
ASN420
(1NO)
11
(1NO-1NC)
●
●
●
●
20
(2NO)
●
●
22
ASN322
ASN422
(2NO-2NC)
●
●
7S
ASN37S (Note)
ASN47S (Note)
(1NO-1NC)
●
●
10
ASN3010
ASN3011
ASN3020
ASN4010
ASN4011
ASN4020
(1NO)
11
(1NO-1NC)
●
●
●
20
(2NO)
●
●
22
ASN3022
ASN4022
(2NO-2NC)
●
7S
ASN307S (Note)
ASN407S (Note)
(1NO-1NC)
Note: The overlapping time is shorter for left to right than right to left. Take overlapping time into consideration.
(14/03/18)
42
ø30
ø30
ø30 Series Selector Switches
ASN Selector Switches (Knob Operator)
45° 3-position
Package Quantity: 1
ASN
4
Shape
•ꢀKnob: Black
2
•ꢀRound bezel (metal): Chrome-plated
•ꢀUnits marked with and part numbers
with "-T" differ in shape.
See page 48 for dimensions.
3
1
Contact Arrangement Chart
•ꢀNameplates are ordered separately.
Spring Return
Spring Return
Contact Block
Operator Position
Maintained
Maintained
from Left
from Right
Contact
Code
C
C
C
C
L
R
L
R
L
R
L
R
Mounting
Contact
L
R
C
Position
NO
NC
NO
NO
NO
NO
NC
NC
NO
NO
NO
NO
NO
NO
NC
NC
NC
NC
NC
NC
NC
NC
NO
NC
NC
NC
NO
NC
NO
NC
NC
NC
NC
NC
NO
NO
NC
NC
NC
NC
NC
NC
NC
NC
1
2
1
2
1
2
3
4
1
2
3
4
1
2
3
4
1
2
1
2
3
4
1
2
1
2
1
2
3
4
1
2
3
4
1
2
3
4
1
2
1
2
3
4
●
●
●
●
●
●
●
11
*ASN111
*ASN211
(1NO-1NC)
●
●
●
●
●
●
●
20
ASN120-T
ASN220-T
(2NO)
22
*ASN122
*ASN222
(2NO-2NC)
40
ASN140-T
ASN240-T
(4NO)
22
ASN15S
ASN17S
ASN18S
ASN25S
ASN27S
ASN28S
(2NO-2NC)
02
(2NC)
04
(4NC)
●
●
●
●
●
●
●
11
*ASN1011
*ASN2011
(1NO-1NC)
●
●
●
●
●
●
●
02
—
ASN2002-T
(2NC)
22
*ASN1022
*ASN2022
(2NO-2NC)
04
—
ASN2004-T
(4NC)
22
ASN105S
ASN107S
ASN108S
ASN205S
ASN20L7S
ASN208S
(2NO-2NC)
02
(2NC)
04
(4NC)
ASN-T are twin-rod units. Single rods are available for the same circuit (marked with *) but different contacts are used.
(14/03/18)
43
ø30
ø30 Series Selector Switches
ASNL Selector Switches (Lever Operator)
90° 2-position
Package Quantity: 1
ASNL
4
•ꢀLever: Black
•ꢀRound bezel (metal): Chrome-plated
Shape
2
•ꢀUnits marked with and part numbers with
"-T" differ in shape.
See page 48 for dimensions.
3
1
Contact Arrangement Chart
•ꢀNameplates are ordered separately.
Spring Return
from Right
Spring Return
Contact Block
Operator Position
Maintained
Maintained
from Left
Contact
Code
L
R
L
R
L
R
L
R
Mounting
Position
Contact
L
R
●
●
1
2
1
2
1
2
1
2
3
4
NO
Dummy
NO
NC
NO
NO
NO
NC
NO
10
ASN3L10
ASN3L11
ASN3L20
ASN4L10
ASN4L11
ASN4L20
(1NO)
11
(1NO-1NC)
●
●
●
●
20
(2NO)
●
●
22
ASN3L22
ASN4L22
(2NO-2NC)
●
NC
1
NO
ASN3L7S (Note)
7S
(1NO-1NC)
ASN4L7S (Note)
2
NC
1
2
1
2
1
●
●
NO
Dummy
NO
NC
NO
10
ASN30L10
ASN30L11
ASN40L10
ASN40L11
(1NO)
11
(1NO-1NC)
●
●
●
●
20
(2NO)
ASN30L20
ASN30L22
ASN40L20
ASN40L22
NO
2
NO
NC
NO
NC
NO
NC
1
2
3
4
1
2
●
●
22
(2NO-2NC)
●
7S
(1NO-1NC)
ASN30L7S (Note)
ASN40L7S (Note)
Note: The overlapping time is shorter for left to right than right to left. Take overlapping time into consideration.
(14/03/18)
44
ø30
ø30
ø30 Series Selector Switches
ASNL Selector Switches (Lever Operator)
45° 3-position
Package Quantity: 1
ASNL
4
•ꢀLever: Black
•ꢀRound bezel (metal): Chrome-plated
Shape
2
•ꢀUnits marked with and part numbers with
"-T" differ in shape.
See page 48 for dimensions.
3
1
Contact Arrangement Chart
•ꢀNameplates are ordered separately.
Spring Return
Spring Return
Maintained
Contact Block
Operator Position
Maintained
from Left
from Right
Contact
Code
C
C
C
C
L
R
L
R
L
R
L
R
Mounting
Contact
L
R
C
Position
NO
NC
NO
NO
NO
NO
NC
NC
NO
NO
NO
NO
NO
NO
NC
NC
NC
NC
NC
NC
NC
NC
NO
NC
NC
NC
NO
NC
NO
NC
NC
NC
NC
NC
NO
NO
NC
NC
NC
NC
NC
NC
NC
NC
1
2
1
2
1
2
3
4
1
2
3
4
1
2
3
4
1
2
1
2
3
4
1
2
1
2
1
2
3
4
1
2
3
4
1
2
3
4
1
2
1
2
3
4
●
●
●
●
●
●
●
11
*ASNL111
*ASNL211
(1NO-1NC)
●
●
●
●
●
●
●
20
ASNL120-T
ASNL220-T
(2NO)
22
*ASN1L22
*ASN2L22
(2NO-2NC)
40
ASN1L40-T
ASN2L40-T
(4NO)
22
ASN1L5S
ASN1L7S
ASN1L8S
ASN2L5S
ASN2L7S
ASN2L8S
(2NO-2NC)
02
(2NC)
04
(4NC)
●
●
●
●
●
●
●
11
*ASN10L11
*ASN20L11
(1NO-1NC)
●
●
●
●
●
●
●
02
—
ASN20L02-T
(2NC)
22
*ASN10L22
*ASN20L22
(2NO-2NC)
04
—
ASN20L04-T
(4NC)
22
ASN10L5S
ASN10L7S
ASN10L8S
ASN20L5S
ASN20L7S
ASN20L8S
(2NO-2NC)
02
(2NC)
04
(4NC)
ASN-T are twin-rod units. Single rods are available for the same circuit (marked with *) but different contacts are used.
(14/03/18)
45
ø30
ø30 Series Selector Switches
ASNK Key Selector Switches
90° 2-position
Package Quantity: 1
ASNK
•ꢀCylinder: Chrome-plated
•ꢀRound bezel (metal): Chrome-plated
•ꢀOn the spring-returned, the keys can be released only from
the maintained position. On the maintained, the key can be
released from every position. Key retained positions are also
available. See page 21.
Shape
4
2
3
•ꢀKey selector switch is supplied with two standard keys.
Two different keys are available upon request.
•ꢀPart numbers with "-T" differ in shape.
1
•ꢀSee page 48 for dimensions.
•ꢀNameplates are ordered separately.
Contact Arrangement Chart
Spring Return
from Right
Spring Return
from Left
Contact Block
Mounting
Operator Position
Maintained
Maintained
Contact
Code
L
R
L
R
L
R
L
R
Contact
L
R
Position
1
2
2
2
1
2
1
2
3
4
1
2
1
2
1
2
1
2
1
2
1
2
1
2
3
4
1
2
NO
—
NO
NC
NO
●
ASN3K10-T
ASN4K10-T
10
(1NO)
*ASN3K10
*ASN4K10
—
●
ASN3K11-T
*ASN3K11
ASN4K11-T
*ASN4K11
11
(1NO-1NC)
●
●
●
●
ASN3K20-T
*ASN3K20
ASN4K20-T
*ASN4K20
20
(2NO)
NO
NO
NC
NO
NC
NO
●
●
ASN3K22-T
*ASN3K22
ASN4K22-T
*ASN4K22
22
(2NO-2NC)
●
ASN3K7S-T
*ASN3K7S (Note)
ASN4K7S-T
*ASN4K7S (Note)
7S
(1NO-1NC)
NC
NO
—
NC
—
NO
NO
NC
NC
NC
NC
NC
NO
NC
NO
NO
NC
●
●
●
10
*ASN30K10
*ASN40K10
(1NO)
—
—
01
—
ASN40K01-T
(1NC)
ASN40K11-T
11
*ASN30K11
*ASN30K20
—
(1NO-1NC)
*ASN40K11
●
●
●
●
●
●
20
ASN40K20
(2NO)
02
ASN40K02-T
(2NC)
●
●
ASN40K22-T
*ASN40K22
22
*ASN30K22
(2NO-2NC)
●
ASN40K7S-T
*ASN40K7S (Note)
7S
*ASN30K7S (Note)
(1NO-1NC)
Note: The overlapping time is shorter for left to right than right to left. Take overlapping time into consideration.
(14/03/18)
46
ø30
ø30
ø30 Series Selector Switches
ASNK Key Selector Switches
45° 3-position
Package Quantity: 1
ASN
K
•ꢀCylinder: Chrome-plated
•ꢀRound bezel (metal): Chrome-plated
•ꢀOn the spring-returned types, the keys can be released
only from the maintained position. On the maintained types,
the key can be released from every position. Key retained
positions are also available. See page 21.
Shape
4
2
3
•ꢀKey selector switch is supplied with two standard keys.
Two different keys are available upon request.
•ꢀSee page 48 for dimensions.
1
Contact Arrangement Chart
•ꢀNameplates are ordered separately.
Contact Block
Mounting
Operator Position
Maintained
Spring Return from Left
Maintained
Spring Return from Right
Contact
Code
C
C
C
C
L
R
L
R
L
R
L
R
Contact
L
C
R
Position
1
2
1
2
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
1
2
1
2
3
4
1
2
3
4
1
2
1
2
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
1
2
1
2
3
4
1
2
3
4
●
●
●
●
●
●
●
NO
NC
NO
NO
NO
NC
NO
NC
NO
NO
NO
NO
NO
NC
NO
NC
NO
NO
NC
NC
NO
NC
NC
NC
NO
NC
NO
NC
NC
NC
NC
NC
NO
NC
NC
NC
NO
NC
NO
NC
NC
NC
NC
NC
NO
NC
NO
NC
NO
NO
NC
NC
NO
NC
NC
NC
NO
NC
NO
NC
NC
NC
NC
NC
11
*ASN1K11
*ASN2K11
(1NO-1NC)
●
●
●
●
●
●
●
20
ASN1K20-T
ASN2K20-T
(2NO)
22
*ASN1K22
*ASN2K22
(2NO-2NC)
40
ASN1K40-T
ASN2K40-T
(2NO)
*ASN1K5S
*ASN2K5S
5S
(2NO-2NC)
●
●
ASN1K5S-T
ASN2K5S-T
*ASN1K7S
*ASN2K7S
7S
(2NC)
ASN1K7S-T
ASN2K7S-T
*ASN1K8S
*ASN2K8S
8S
(4NC)
ASN1K8S-T
ASN2K8S-T
●
●
●
●
●
●
●
11
*ASN10K11
*ASN20K11
(1NO-1NC)
●
●
●
●
●
●
●
20
—
ASN20K02-T
(2NC)
22
*ASN10K22
*ASN20K22
(2NO-2NC)
04
—
ASN20K04-T
(4NC)
*ASN10K5S
*ASN20K5S
5S
(2NO-2NC)
●
●
—
ASN20K5S-T
*ASN10K7S
*ASN20K7S
7S
(2NC)
—
ASN20K7S-T
*ASN10K8S
*ASN20K8S
8S
(4NC)
—
ASN20K8S-T
ASN-T are twin-rod units. Single rods are available for the same circuit (marked with *) but different contacts are used.
(14/03/18)
47
ø30
ø30 Series Selector Switches
Dimensions
Knob Operator
Dimensions of knob operator marked with or "-T" in the Part No.
90°
Panel Thickness
0.8 to 7.5
Panel Thickness
0.8 to 7.5
M3.5 Terminal Screw
M3.5 Terminal Screw
23
6
23
6
40
40
(
54 1 or 2
blocks)
(
58 1 or 2
blocks
)
22
22
77 (3 or 4 blocks)
81 (3 or 4 blocks)
Lever Operator
Dimensions of lever operator marked with or "-T" in the Part No.
90°
Panel Thickness
0.8 to 7.5
Panel Thickness
0.8 to 7.5
M3.5 Terminal Screw
M3.5 Terminal Screw
23
6
23
6
(
54 1 or 2
(
40
58 1 or 2
40
)
blocks
)
blocks
26.5
27
81 (3 or 4 blocks)
77 (3 or 4 blocks)
Key Selector
Dimensions of key selector switches marked with "-T" in the Part No.
90°
Panel Thickness
0.8 to 7.5
Panel Thickness
0.8 to 7.5ꢀꢀ
M3.5 Terminal Screw
M3.5 Terminal Screw
23
6
6
23
(
54 1 or 2
blocks)
40
16.5
38
57 (1 or 2
blocks)
40
22
22
77 (3 or 4 blocks)
80 (3 or 4 blocks)
All dimensions in mm.
Contact Block Mounting Position and Contact Arrangement Chart
Center
Left
Right
4
2
Operator
position
L
C
R
1
2
3
4
NO
NO
NC
NC
●
●
3
1
(14/03/18)
48
ø30
ø30
ø30 Series Selector Switches
ASTN Selector Switches (Knob Operator)
Package Quantity: 1
ASTN
•ꢀKnob operator: Black
•ꢀRound bezel (metal): Chrome-plated
Shape
Contact Arrangement Chart
Spring Return
from Right
Contact Block
Operator Position
Maintained
—
—
—
Contact
Code
L
R
L
R
Mounting
Contact
L
R
—
Position
NO
NC
NO
NO
NC
NC
1
2
1
2
3
4
●
11
ASTN3211
ASTN3222
ASTN4211
ASTN4222
(1NO-1NC)
●
●
●
—
—
22
(2NO-2NC)
●
●
Spring Return
from Left
Spring Return
from Right
Spring Return
Two-way
Contact Block
Operator Position
Maintained
Contact
Code
C
C
C
C
L
R
L
R
L
R
L
R
Mounting
Position
Contact
L
●
●
C
R
NO
NO
NO
NO
NC
NC
NO
NO
NC
NC
NO
NO
NO
NO
NO
NC
NC
NO
NO
NO
NO
NO
NO
NO
NC
NO
NC
NO
NC
NO
NO
NC
1
2
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
1
2
3
4
1
2
1
2
3
4
1
2
20
—
—
—
ASTN5120
ASTN5122
(2NO)
●
●
22
ASTN1122
ASTN1222
ASTN1340
ASTN2122
ASTN2222
ASTN20122
ASTN20222
—
(2NO-2NC)
●
●
●
22
ASTN5222
(2NO-2NC)
●
●
●
●
●
●
40
—
—
(4NC)
22
ASTN1422
ASTN1520
ASTN1540
ASTN1611
ASTN1622
—
—
—
—
—
—
ASTN20422
—
—
—
—
—
(2NO-2NC)
●
●
20
ASTN20520
(2NO)
●
●
●
●
●
40
ASTN20540
(4NO)
●
●
●
11
—
—
—
(1NO-1NC)
●
●
●
22
(2NO-2NC)
●
11
—
ASTN5111
(1NO-1NC)
Notes:
1.ꢀTheꢀoperatorꢀofꢀtheꢀ2wayꢀspringꢀreturnꢀunitꢀmayꢀslightlyꢀdeviateꢀfromꢀtheꢀcenterꢀposition.
2.ꢀTurnꢀtheꢀoperatorꢀtoꢀeachꢀpositionꢀaccurately.ꢀ
Contact Block Mounting Position and
Contact Arrangement Chart
Dimensions
Panel Thickness
0.8 to 7.5
90°
M3.5 Terminal Screw
Center
C
4
Left
Right
2
Operator
Position
L
R
1
2
3
4
NO
NO
NC
NC
●
6
23
(
)
58 2 blocks
40
●
27
3
(
)
81 4 blocks
1
(14/03/18)
49
ø30
ø30 Series Selector Switches
ASTNL Selector Switches (Lever Operator)
Package Quantity: 1
L
ASTN
•ꢀLever operator: Black
•ꢀRound bezel (metal): Chrome-plated
Shape
Contact Arrangement Chart
Spring Return
from Right
Contact Block
Operator Position
Maintained
—
—
—
—
Contact
Code
L
R
L
R
Mounting
Contact
L
R
Position
1
2
1
2
3
4
NO
NC
NO
NO
NC
NC
●
11
ASTN32L11
ASTN32L22
ASTN42L11
ASTN42L22
(1NO-1NC)
●
●
●
—
—
22
(2NO-2NC)
●
●
Spring Return
from Left
Spring Return
from Right
Spring Return
Two-way
Contact Block
Operator Position
Maintained
Contact
Code
C
C
C
C
L
R
L
R
L
R
L
R
Mounting
Position
Contact
L
●
●
C
R
NO
NO
NO
NO
NC
NC
NO
NO
NC
NC
NO
NO
NO
NO
NO
NC
NC
NO
NO
NO
NO
NO
NO
NO
NC
NO
NC
NO
NC
NO
NO
NC
1
2
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
1
2
3
4
1
2
1
2
3
4
1
2
20
—
—
—
ASTN51L20
ASTN51L22
(2NO)
●
●
22
ASTN11L22
ASTN12L22
ASTN13L40
ASTN21L22
ASTN22L22
—
ASTN201L22
ASTN202L22
—
(2NO-2NC)
●
●
●
22
ASTN52L22
(2NO-2NC)
●
●
●
●
40
(4NC)
●
●
—
22
ASTN14L22
ASTN15L20
ASTN15L40
ASTN16L11
ASTN16L22
—
—
—
—
—
—
—
ASTN204L22
—
(2NO-2NC)
●
●
20
ASTN205L20
—
(2NO)
●
●
●
●
●
40
ASTN205L40
—
(4NO)
●
●
●
11
—
—
—
—
—
(1NO-1NC)
●
●
●
22
(2NO-2NC)
●
11
ASTN51L11
(1NO-1NC)
Notes:
1.ꢀTheꢀoperatorꢀofꢀtheꢀ2wayꢀspringꢀreturnꢀunitꢀmayꢀslightlyꢀdeviateꢀfromꢀtheꢀcenterꢀposition.
2.ꢀTurnꢀtheꢀoperatorꢀtoꢀeachꢀpositionꢀaccurately.ꢀ
Contact Block Mounting Position and
Contact Arrangement Chart
Dimensions
Panel Thickness
0.8 to 7.5
90°
M3.5 Terminal Screw
Center
C
Left
Right
4
2
Operator
Position
L
R
1
2
3
4
NO
NO
NC
NC
●
23
6
●
(
40
58 1 or 2
)
blocks
29
3
(
)
81 4 blocks
1
(14/03/18)
50
ø30
ø30
ø30 Series Selector Switches
ASTNK Key Selector Switches
Package Quantity: 1
ASTNK
Shape
•ꢀCylinder: Chrome-plated
•ꢀRound bezel (metal): Chrome-plated
•ꢀOn the spring-returned, the keys can be released
only from the maintained position.
•ꢀOn the maintained, the key can be released from
every position. Key retained positions are also
available. See page 21.
Contact Arrangement Chart
Spring Return
from Right
Contact Block
Operator Position
Maintained
—
—
—
—
Contact
Code
(ASTN)
L
R
L
R
Mounting
Contact
L
R
Position
NO
NC
NO
NO
NC
NC
1
2
1
2
3
4
●
11
ASTN32K11
ASTN32K22
ASTN42K11
ASTN42K22
(1NO-1NC)
●
●
●
—
—
22
(2NO-2NC)
●
●
Spring Return
from Left
Spring Return
from Right
Spring Return
Two-way
Contact Block
Operator Position
Maintained
Contact
Code
(ASTN)
C
C
C
C
L
R
L
R
L
R
L
R
Mounting
Position
Contact
L
●
●
C
R
NO
NO
NO
NO
NC
NC
NO
NO
NC
NC
NO
NO
NO
NO
NO
NC
NC
NO
NO
NO
NO
NO
NO
NO
NC
NO
NC
NO
NC
NO
NO
NC
1
2
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
1
2
3
4
1
2
1
2
3
4
1
2
20
—
—
—
ASTN51K20
ASTN51K22
(2NO)
●
●
22
ASTN11K22
ASTN12K22
ASTN13K40
ASTN21K22
ASTN22K22
—
ASTN201K22
ASTN202K22
—
(2NO-2NC)
●
●
●
22
ASTN52K22
(2NO-2NC)
●
●
●
●
●
●
40
—
(4NC)
22
ASTN14K22
ASTN15K20
ASTN15K40
ASTN16K11
ASTN16K22
—
—
—
—
—
—
—
ASTN204K22
—
(2NO-2NC)
●
●
20
ASTN205K20
—
(2NO)
●
●
●
●
●
40
ASTN205K40
—
(4NO)
●
●
●
11
—
—
—
—
—
(1NO-1NC)
●
●
●
22
(2NO-2NC)
●
11
ASTN51K11
(1NO-1NC)
Notes:
1.ꢀTheꢀoperatorꢀofꢀtheꢀ2wayꢀspringꢀreturnꢀunitꢀmayꢀslightlyꢀdeviateꢀfromꢀtheꢀcenterꢀposition.ꢀ
2.ꢀTurnꢀtheꢀoperatorꢀtoꢀeachꢀpositionꢀaccurately.ꢀ
Contact Block Mounting Position and
Contact Arrangement Chart
Dimensions
Panel Thickness
0.8 to 7.5
M3.5 Terminal Screw
Center
C
Left
Right
4
2
Operator
Position
L
R
1
2
3
4
NO
NO
NC
NC
●
23
6
16.5
38
(
57 1 or 2
blocks)
●
40
3
(
)
80 4 blocks
1
(14/03/18)
51
ø30
ø30 Series Illuminated Selector Switches
ASLN Illuminated Selector Switches
90° 2-position
Package Quantity: 1
Shape
ASLN (Base BA9S)
Contact Arrangement Chart
Operator
Maintained
Spring Return
from Right
Spring Return
from Left
Contact Block
Position
Contact
L
R
L
R
L
R
Lamp
Code
Mounting
Position
Con-
tact
L
R
1
2
NO
NC
●
Without Lamp
LED
ASLN29911N
ASLN219911N
ASLN229911N
*
➁
➁
➁
11
●
ASLN2 11DN
ASLN21 11DN
ASLN22 11DN
*
➂
➁
➂
➁
➁
➁
➂
➁
(1NO-1NC)
Incandescent
Without Lamp
LED
ASLN2 11N
ASLN21 11N
ASLN22 11N ꢀ*
➂ ➁
➂
➁
➂
➁
1
2
NO
NO
●
●
ASLN29920N
ASLN219920N
ASLN229920N ꢀ*
➁
➁
➁
20
(2NO)
ASLN2 20DN
ASLN21 20DN
ASLN22 20DN ꢀ*
➂ ➁
➂
➁
➂
Incandescent
Without Lamp
LED
ASLN2 20N
ASLN21 20N
ASLN22 20N ꢀ*
➂ ➁
➂
➁
➂
➁
1
2
3
4
NO
NC
NO
NC
●
●
ASLN29922N
ASLN219922N
ASLN229922N
*
➁
➁
➁
●
●
22
(2NO-2NC)
ASLN2 22DN
ASLN21 22DN
ASLN22 22DN
*
➂
➁
➂
➂
➁
Incandescent
ASLN2 22N
ASLN21 22N
ASLN22 22N
*
➂
➁
➂
➁
➂
➁
Color Code and Operating Voltage Code
Specify a code in place of or in the Part No.
➁
➂
➁ Lens/LED Color Code
➂ Operating Voltage Code
LED Incandescent
Input
LED
Incandescent
A: amber
G: green
R: red
A: amber
G: green
R: red
S: blue
W: white
66: 6V AC/DC
11: 12V AC/DC
22: 24V AC/DC
66: 6V AC/DC
88: 12V AC/DC
33: 24V AC/DC
Full voltage
Transformer
S: blue
16: 100/110V AC
136: 120V AC
26: 200/220V AC
256: 240V AC
386: 380V AC
46: 400/440V AC
486: 480V AC
W: white
Y: yellow
16: 100/110V AC
136: 120V AC
26: 200/220V AC
256: 240V AC
386: 380V AC
46: 400/440V AC
Use a pure white
LED lamp for yellow
illumination
On the 2-position selector switches marked with * above, the contact operation is reversed as follows.
[Example]
Dimensions
Contact Block Mounting Position
and Contact Arrangement Chart
Panel Thickness
0.8 to 7.5
90°
M3.5 Terminal Screws
(
including nameplate)
M3 Terminal Screw
Left
Right
4
2
Operator
Position
L
●
●
R
1
2
3
4
NO
NO
NC
NC
●
40
5.5
23
A: 86 4 blocks
(
)
63 2 blocks
9
(
)
3
●
A: Full voltage
B: Transformer
(
)
,
(
)
B: 97.5 2 blocks 120.5 4 blocks
28
1
(14/03/18)
52
ø30
ø30
ø30 Series Illuminated Selector Switches
ASLN Illuminated Selector Switches
45° 3-position
Package Quantity: 1
Spring Return
Maintained
Spring Return
Spring Return
Operator
Position
Contact Block
from Right
from left
Two-way
Contact
Code
C
C
C
C
Lamp
L
R
L
R
L
R
L
R
Mounting
Position
Con-
tact
L
C
R
1
2
NO
NO
Without Lamp
LED
●
ASLN39920N
ASLN319920N
ASLN329920N
ASLN339920N
➁
➁
➁
➁
20
●
ASLN3 20DN
ASLN31 20DN
ASLN32 20DN
ASLN33 20DN
➂
➂
➁
➂
➁
➂
➁
➁
(2NO)
Incandescent
Without Lamp
LED
ASLN3 20N
ASLN31 20N
ASLN32 20N
ASLN33 20N
➂ ➁
➂
➁
➂
➁
➂
➁
1
2
NC
NC
ASLN39902N
ASLN319902N
ASLN329902N
ASLN339902N
➁
➁
➁
➁
02
ASLN3 02DN
ASLN31 02DN
ASLN32 02DN
ASLN33 02DN
➂
➂
➁
➂
➁
➂
➁
➁
(2NC)
Incandescent
Without Lamp
ASLN3 02N
ASLN31 02N
ASLN32 02N
ASLN33 02N
➂ ➁
➂
➁
➂
➁
➂
➁
1
2
3
4
NO
NO
NC
NC
●
ASLN39922N
ASLN319922N
ASLN329922N
ASLN339922N
➁
➁
➁
➁
●
22
LED
ASLN3 22DN
ASLN31 22DN
ASLN32 22DN
ASLN33 22DN
➂
➂
➁
➁
➁
➂
➁
➁
➁
➂
➁
➁
➁
➁
➁
➁
(2NO-2NC)
Incandescent
Without Lamp
LED
ASLN3 22N
ASLN31 22N
ASLN32 22N
ASLN33 22N
➂ ➁
➂
➁
➂
➁
➂
➁
1
2
3
4
NO
NO
NO
NO
●
●
ASLN39940N
ASLN319940N
ASLN329940N
ASLN339940N
➁
➁
➁
➁
●
●
40
ASLN3 40DN
ASLN31 40DN
ASLN32 40DN
ASLN33 40DN
➂
➂
➂
➂
(4NO)
Incandescent
Without Lamp
LED
ASLN3 40N
ASLN31 40N
ASLN32 40N
ASLN33 40N
➂ ➁
➂
➁
➂
➁
➂
➁
1
2
3
4
NC
NC
NC
NC
ASLN39904N
ASLN319904N
ASLN329904N
ASLN339904N
➁
➁
➁
➁
04
ASLN3 04DN
ASLN31 04DN
ASLN32 04DN
ASLN33 04DN
➂
➂
➂
➂
(4NC)
Incandescent
ASLN3 04N
ASLN31 04N
ASLN32 04N
ASLN33 04N
➂ ➁
➂
➁
➂
➁
➂
➁
Color Code and Operating Voltage Code
Specify a code in place of or in the Part No.
➁
➂
➁ Lens/LED Color Code
➂ Operating Voltage Code
Input
LED
Incandescent
LED
Incandescent
A: amber
G: green
R: red
A: amber
G: green
R: red
S: blue
W: white
66: 6V AC/DC
11: 12V AC/DC
22: 24V AC/DC
66: 6V AC/DC
88: 12V AC/DC
33: 24V AC/DC
Full voltage
S: blue
16: 100/110V AC
136: 120V AC
26: 200/220V AC
256: 240V AC
386: 380V AC
46: 400/440V AC
486: 480V AC
W: white
Y: yellow
16: 100/110V AC
136: 120V AC
26: 200/220V AC
256: 240V AC
386: 380V AC
46: 400/440V AC
Transformer
Use a pure white LED
lamp for yellow illumi-
nation
Contact Block Mounting Position
and Contact Arrangement Chart
Dimensions
Panel Thickness
0.8 to 7.5
90°
M3.5 Terminal Screws
M3 Terminal Screw
Center
(
including nameplate)
Left
Right
4
2
L
C
R
Operator
Position
1
2
3
4
NO
NO
NC
NC
●
●
5.5
23
A: 86 4 blocks
40
3
(
)
63 2 blocks
9
(
)
1
A: Full Voltage
B: Transformer
(
)
,
(
)
B: 97.5 2 blocks 120.5 4 blocks
28
(14/03/18)
53
ø30
ø30 Series Selector Pushbuttons
ABN Ring Operator / ABNL Lever Operator Selector Pushbuttons
Package Quantity: 1
Ring/Lever
Ring
Operator
Lever
Operator
Contact
Block
Button
Color
Code
➀
Contact Circuit
Shape
Code
Code
Pushbutton
Part No.
Part No.
Mounting
Position
Con-
tact
Normal
Push
Normal
Push
1
NO
NC
NC
NO
NO
NC
NO
NO
NC
NC
NO
NO
NC
NC
NO
NO
NC
NC
NO
NO
NC
NC
NO
NO
NC
NC
NO
NO
NC
NC
NO
NO
NC
NC
NO
NO
●
●
ABN
A
I
ABN6111
ABN6411
ABN9111
ABN7120
ABN6L111
ABN6L411
ABN9L111
➀
➀
➀
➀
➀
➀
➀
2
●
●
1
11
(1NO-1NC)
2
●
1
●
●
Blocked
G
D
2
●
●
1
●
20
Ring Operator (90° 2-position)
(2NO)
2
Panel Thickness 0.8 to 7.5
(including nameplate)
M3.5 Terminal Screw
1
●
●
2
B
C
I
ABN6122
ABN6222
ABN6422
ABN7122
ABN7222
ABN7322
ABN9122
ABN6L122
ABN6L222
ABN6L422
ABN7L122
ABN7L222
ABN7L322
ABN9L122
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
➀
3
●
●
●
●
6
23
41
25
40
4
Panel Thickness 0.8 to 7.5
(including nameplate)
1
●
M3.5 Terminal Screw
2
3
●
●
●
4
6
23
23
41
25
40
1
●
●
B: black
G: green
R: red
ABNL
2
3
●
●
Y: yellow
4
1
●
2
●
22
D
E
F
H
(2NO-2NC)
3
●
●
4
●
●
●
1
Lever Operator (90° 2-position)
Panel Thickness 0.8 to 7.5
M3.5 Terminal Screw
2
(including nameplate)
3
4
1
●
26
6
23
41
40
2
●
3
●
Panel Thickness 0.8 to 7.5
(including nameplate)
M3.5 Terminal Screw
4
1
●
●
●
●
2
Blocked
3
6
23
23
26
●
●
41
40
4
•ꢀSpecify a button color code in place of in the Part No.
➀
•ꢀRing/Lever (metal): Chrome-plated
Notes
1.ꢀCircuitꢀCodesꢀA,ꢀB,ꢀC,ꢀandꢀI:ꢀWhenꢀtheꢀringꢀorꢀleverꢀoperatorꢀisꢀturned,ꢀtheꢀbuttonꢀisꢀpushedꢀin.
2.ꢀCircuitꢀCodesꢀEꢀandꢀF:ꢀ
TheꢀrightꢀandꢀleftꢀNCꢀcontactꢀblocksꢀonꢀcircuitꢀcodeꢀEꢀorꢀFꢀmayꢀoverlapꢀeachꢀotherꢀwhileꢀturningꢀtheꢀringꢀorꢀleverꢀ
operator.ꢀTheꢀNOꢀandꢀNCꢀcontactꢀblocksꢀonꢀcircuitꢀcodeꢀFꢀmayꢀoverlapꢀeachꢀotherꢀwhileꢀpressingꢀtheꢀbutton.ꢀ
3.ꢀCircuitꢀCodesꢀGꢀandꢀH:ꢀTheꢀpushbuttonꢀdoesꢀnotꢀoperateꢀwhenꢀtheꢀringꢀorꢀleverꢀoperatorꢀisꢀturnedꢀtoꢀtheꢀleftꢀposition.
4.ꢀWhenꢀusingꢀtheꢀselectorꢀpushbutton,ꢀdoꢀnotꢀturnꢀtheꢀringꢀorꢀleverꢀoperatorꢀwithꢀtheꢀpushbuttonꢀdepressed.ꢀOtherwise,ꢀdamageꢀorꢀfailureꢀ
mayꢀbeꢀcaused.
Mounting Hole Layout
Contact Block Mounting Position
and Contact Arrangement Chart
1
2
Normal
Push
1
2
3
4
●
●
50
3
4
●
●
80
Ring Operator
Lever Operator
(14/03/18)
54
ø30
ø30
ø30 Series Accessories and Replacement Parts
Terminal Covers
Terminal Cover N-VL2
N-VL3
N-VL4
APN-PVL
APD-PVL
Use of termi-
nal covers
increases the
depth by the
dimensions
below.
38H × 30.4W
38.4H × 22W
38.4H × 24W 38H × 46W
37H × 44W
Terminal Cover
ø30 Series Switches & Pilot Lights
Pilot Light
APN, APNE, UPQN, UPQNE
X
+5.0 mm
Full Voltage
Pilot Light
APD, APDE
X
+5.2 mm
+2.7 mm
Pilot Light
APN, APNE, APD, APDE,
UPQN, UPQNE
Transformer
DC-DC Converter
X
1 contact block
Terminal Cover
X
CB
Pushbutton
ABN, ABD, AON, AOD, AVN,
ABGD, AJN, ABFD, ATN,
AOFD, UBQN, AVD, UOQN,
AJD, UWQN, AZD, ABBN,
AYD, ABBS (ø25)
2 contact blocks
X
CB
CB
2 pieces
+0 mm
3 contact blocks
Selector Switch
ASN, ASD, ASTN
X
CB CB
CB
2 pieces
Selector Pushbutton
ABN, ASBD
4 contact blocks
X
CB CB
CB CB
2 pieces
Illuminated Pushbutton
ALN, ALD, ALNE, ALDE,
AOLN, AOLD, AOLNE,
AOLDE, ALGN, ALGD,
ALGNE, ALGDE, AOLGN,
AOLGDE, ALFN, ALFD,
ALFNE, ALFDE, AOLFN,
AOLFD, AOLFNE, AOLFDE,
AVLN, AVLD, AVLNE, AVLDE,
AJLN, AJLD, AJLNE, AJLDE,
ULQN, UOLQN
X
Full Voltage
+4.5 mm
2 pieces
Illuminated Selector Switch
ASLN, ASLD
Transformer
DC-DC Converter
X
+1.5 mm
Push-to-Check Pilot Light
APN1∗∗P
Ordering Terminal Covers
•ꢀWhenꢀorderingꢀterminalꢀcovers,ꢀspecifyꢀtheꢀPartꢀNo.ꢀandꢀtheꢀquantity.
Terminal Cover
(N-VL2)
Terminal Cover
(N-VL2)
(14/03/18)
67
ø30
ø30 Series Accessories and Replacement Parts
Nameplates
Package
Quantity
Model
Legend
Material
Part No.
Ordering No.
Dimensions (mm)
Applicable Unit
NA-0
1
10
1
Blank
NA-0
NA-0PN10
Aluminium
1.2 mm thick
40
NA
White letters on
black background
NA-∗
30.5
ø
R17.5
ø30 switches &
pilot lights
With Legend
NA-∗
10
1
NA-∗PN10
NALO
40
Aluminium
1.2 mm thick
NALO
Blank
NALO
ø
Black
30.5
NALOPN10
10
1
R17.5
70
4
MLO
Brass
(chrome-plated)
1.0 mm thick
ARN/ARNS
Mono-Lever
MLO
Blank
Blank
MLO
CQ-0
Matte
MLOPN10
CQ-0
10
1
ø43
Letters should not be
engraved within this line
•ꢀ With adhesive tapes on
the back
2-ø3.5
CQ-0PN10
10
1
Aluminium
0.5 mm thick
UCSQO
Cam Switch
CQ
White letters on
black background
CQ-∗
With Legend
(Legend
Codes 31
ø13
20
CQ-∗
64
and 53 only)
10
1
CQ-∗PN10
CQM-0
•ꢀ With adhesive tapes on
the back
Blank
CQM-0
12
CQM-0PN10
10
1
Aluminium
0.5 mm thick
UCSQM
Cam Switch
CQM
White letters on
black background
CQM-∗
2-ø3.5
With Legend
(Legend
Code 31
only)
ø13
40
64
CQM-∗
10
CQM-∗PN10
•ꢀSpecifyꢀaꢀlegendꢀcodeꢀinꢀplaceꢀofꢀ∗ꢀinꢀtheꢀOrderingꢀNo.ꢀ
(14/03/18)
68
ø30
ø30
ø30 Series Accessories and Replacement Parts
Nameplates
Package
Quantity
Model
Legend
Material
Part No.
Ordering No.
Dimensions (mm)
Applicable Unit
•ꢀ With adhesive tapes on
the back
CQN-0
1
Blank
CQN-0
Aluminium
0.5 mm thick
CQN-0PN10
10
1
ACSNO, ACSNK
Cam Switches
CQN
White letters
on black
background
30.5
64
ø
ø30 mm Selector
Switches
CQN-∗
With Legend
(Legend
CQN-∗
Codes 31, 35,
and 53 only)
10
1
CQN-∗PN10
CQS-0
•ꢀ With adhesive tapes on
the back
Blank
CQS-0
ø
25.5
Aluminium
0.5 mm thick
CQS-0PN10
10
1
ACSSO, ACSSK
Cam Switches
CQS
White letters
on black
background
ø25 mm Selector
Switches
CQS-∗
With Legend
(Legend Code
53 only)
CQS-∗
64
10
CQS-∗PN10
•ꢀSpecifyꢀaꢀlegendꢀcodeꢀinꢀplaceꢀofꢀ∗ꢀinꢀtheꢀOrderingꢀNo.
Legends
Code
0
Legend
(blank)
ON
1
2
OFF
3
4
START
STOP
31
35
53
OFF-ON
HAND-AUTO
HAND-OFF-AUTO
Example
Shape and Engraving Area
No. of
Letters
on 1 Line
Engraving Area
Max. No.
of Lines
2
2
36
Shape
2
2
Height
Width
36
Standard
Large
5
36
36
1
2
14
14
10
The above example is when the letter is 4 mm tall.
Standard
Type NA
Large
Type NALO
(14/03/18)
69
ø30
ø30 Series Accessories and Replacement Parts
Accessories
Package
Quantity
Shape
Locking Ring Wrench
Material
Part No.
Ordering No.
Dimensions (mm)
•ꢀUsed to tighten the locking ring when installing
the ø30 or ø25 switch onto a panel.
22
30
ø
ø
26
ø
34
ø
Rubber
OR-12
OR-12
1
1
90
ø25 Series
ø30 Series
•ꢀUsed to install and remove the LED/incandes-
Lamp Holder Tool
cent lamps. See page 75.
Rubber
OR-55
OR-55
OR-55
59
•ꢀRubber boot used to prevent oil and dirt from
entering into the contact block.
•ꢀTemperature range: –5 to +60°C
•ꢀCannot be used for zinc diecast switches & pilot
lights.
Contact Rubber Boot
For momentary 1 layer of contact
blocks (2 contact blocks)
18
42
Rubber (nitryl)
(black)
OC-99
OC-90
OC-99
OC-90
1
44
•ꢀApplicable to AVN3 and AJN3.
•ꢀApplicable to ø30 diecast zinc pushbuttons and
selector switches.
Contact Rubber Boot For 1 layer
of contact
blocks
1
1
(2 contact
blocks)
Rubber
(translucent)
For 2 layers
of contact
blocks
(4 contact
blocks)
OC-290 OC-290
42.8
42.4
(
)
65.4
•ꢀUsed to prevent the operator from turning.
Generally used when using no nameplates on
selector switches and selector pushbuttons.
Anti-rotation Ring
2.8
0.8
Metal
OGL-11 OGL-11PN10
10
ø30.5
ø39
•ꢀUsed to plug unused
Rubber Mounting Hole Plug
Plastic Mounting Hole Plug
ø30mm mounting holes.
•ꢀGray also available.
Ordering No.:
ø40
Rubber
(black)
OB-13B OB-13BPN05
5
1
OB-13PN05
ø30
ø34
•ꢀTightening torque: 1.2 N·m.
•ꢀDegree of protection: IP65
ø36
Plastic
(gray)
OBP-11 OBP-11
M30P1.5 Screw
Locking Ring
•ꢀTightening torque: 1.2 N·m.
•ꢀDegree of protection: IP65
Metallic Mounting Hole Plug
ø36
Metal
(diecast)
(zinc-plated)
OB-11
OB-11
1
M30P1.5 Screw
Locking Ring
(14/03/18)
70
A
suit
sub
jectꢀtoꢀoilꢀsplash.
Button Cover for
Extended Pushbuttons
•ꢀMetallicꢀbezelsꢀcov
withꢀaꢀrubberꢀbootꢀtoꢀ
eredꢀ
ø30
ø30
ø30 Series Accessories and Replacement Parts
Accessories
Ordering Package
Shape
Material
Part No.
Color Part No.
Black
Dimensions (mm)
No.
Quantity
–
–
ø28
OC-11B
OC-11R
OC-11G
OC-11Y
OC-11B
OC-11R
OC-11G
OC-11Y
enhanceꢀwaterproofꢀ
characteristics.
Rubber (nitryl) Green
•ꢀButtonꢀisꢀnotꢀincluded.ꢀ
Applicableꢀtoꢀextendedꢀ
pushbuttonsꢀonly.
1
1
1
ø38
Red
M30P1.5
Yellow
•ꢀUsedꢀtoꢀcoverꢀandꢀ
protectꢀpushbuttonsꢀ
whereꢀunitsꢀareꢀsubjectꢀ
toꢀwaterꢀsplash.ꢀNotꢀ
ableꢀforꢀoutdoorꢀuseꢀ
orꢀwhereꢀtheꢀunitsꢀareꢀ
Button
Clear Boot
For flush
pushbuttons
OC-121
OC-121
OC-122
Rubber
(EPDM)
For extended
pushbuttons
A
B
OC-122
OC-121
OC-122
37
37
16
16
Dust-proof Rubber Cover
for Jumbo Mushrooms
•ꢀUsedꢀforꢀABN4Gꢀ
pushbuttons.
Panel Thickness
1.2 to 5.5
Rubber
(nitryl)
black
OC-4GN
OC-4GN
1
32
•ꢀUsed to protect pushbuttons, illuminated push-
Padlock Cover
buttons, and selector switches (knob operator)
.
82.5
Panel Thickness
0.8 to 3.2
R66.5
Polyarylate
(gasket: nitryl
rubber)
OL-KL1
OL-KL1
1
24
Waterproof Rubber
Gasket 0.5t
Key Hole ø8
29.5
30
•ꢀUsed to protect flush pushbuttons from
inadvertent operation.
Metal Protector
•ꢀCan be easily attached using the locking ring.
42.5
Metal
(zinc-plated)
16
OL-C
OL-C
1
1.6
11.5
•ꢀUsed to lock an extended pushbutton in the
depressed position.
Locking Attachmentt
•ꢀCan be easily attached using the locking ring.
30
Metal
(zinc-plated)
OL-H
OL-H
1
Locking Plate
ø6 hole
Mounting Plate
(14/03/18)
71
ø30
ø30 Series Accessories and Replacement Parts
Maintenance Parts
Package
Quantity
Shape
Specification
Part No.
Ordering No.
Remarks
Metallic Bezel
Metal
(zinc diecast: chrome-
plated)
•ꢀ Cannot be used with pin lock,
selector pushbuttons, and mono-
lever units.
OG-11
OG-11PN02
2
Plastic Bezel
Specify a color code in place of ∗.
B (black), G (green), R (red), W
(white),
Plastic
(polycarbonate)
Y (yellow)
2
OGP-11∗
OGP-11∗PN02
•ꢀ Cannot be used with pin lock,
selector pushbuttons, and mono-
lever units.
Clear Plastic Bezel for Flush
Pushbuttons
OGP-13
OGP-13PN02
2
2
Clear Plastic Bezel for
Extended Pushbuttons
•ꢀ Clear plastic bezel and full
shroud.
OGP-14
OGP-14PN02
Clear Plastic
(acrylic)
•ꢀ OGP-1411 cannot be used with
LED illumination units and diecast
units.
Clear Plastic Bezel for
Illuminated Pushbuttons
OGP-1411 OGP-1411
1
5
Metal Bezel for Illuminated
Pushbuttons
Metal
(zinc diecast)
OL-11
OL-11PN05
Clear Button Cover
Marking Plate
•ꢀ Used on flush and extended
pushbuttons to indicate a mark or
a symbol engraved on the mark-
ing plate. The clear button cover
holds the marking plate. The ø30
series marking chip can only be
used on the ABN1 and AON1.
Clear Plastic
(polycarbonate)
ABN1B-C
ABN1B-CPN05
5
•ꢀ Specify a color code in place of ∗.
B (black), G (green), R (red), W
(white), Y (yellow)
Plastic
(polyacetal)
10
TN-0∗
TN-0∗PN10
(14/03/18)
72
ø30
ø30
ø30 Series Accessories and Replacement Parts
Maintenance Parts
Mate-
rial
Package
Quantity
Shape
Description
Part No.
Ordering No.
BS010E
Color
Contact Block
(BS: Dark gray)
BS010E
BS010E-MAU BS010E-MAU
BS001E BS001E
BS001E-MAU BS001E-MAU
BS010SE BS010SE
BS010SE-MAU BS010SE-MAU
BS001SE BS001SE
BS001SE-MAU BS001SE-MAU
BST010 BST010
BST010-MAU BST010-MAU
BST001 BST001
BST001-MAU BST001-MAU
•ꢀPush rod color: Green
•ꢀ-MAU has gold contacts
1NO contact
1NC contact
1
1
1
1
1
1
•ꢀPush rod color: Red
•ꢀ-MAU has gold contacts
EM contact
(early make)
•ꢀPush rod color: Black
•ꢀ-MAU has gold contacts
LB contact
(late break)
•ꢀPush rod color: White
•ꢀ-MAU has gold contacts
Contact Block
(BST: Light gray)
•ꢀ-MAU has gold
contacts
Applicable Units:
•ꢀPushlock Turn Reset
•ꢀPush Turn Lock
•ꢀLED Illuminated
Pushbutton
•ꢀPush rod
color: Green
1NO contact
1NC contact
•ꢀPush rod
color: Red
•ꢀLED Illuminated
Selector Switch
•ꢀIncandescent
Illuminated Selector
Switch
EM contact
(early make)
•ꢀPush rod
color: Black
BST010S
BST001S
BST010S
BST001S
1
1
LB contact
(late break)
•ꢀPush rod
color: White
Lens
A (amber), C (clear), G (green),
R (red), S (blue), W (white), Y (yellow)
•ꢀUse the white (W) lens for pure white
illumination
➊
➊ Used for
APN(E)1
5
5
APN106LN-
APN106LN- PN05
➁
➁
C (clear), G (green), R (red), S (blue)
•ꢀUse the clear (C) lens for white
illumination.
UPQN406L-
UPQN406L- PN05
➁
➁
➋ Used for
UPQNE4
U(O)LQN∗B
➋
➌
➋
➌
A (amber), Y (yellow)
•ꢀUse the amber (A) lens for orange
illumination.
Plastic
UPQN406LD-
UPQN406LD- PN05
➁
➁
C (clear), G (green), R (red), S (blue)
ULQN06L-
ULQN06L- PN05
➁
➁
➌ Used for
UPQN3B
U(O)LQN
5
A (amber), W (white), Y (yellow)
•ꢀUse the amber (A) lens for orange
illumination.
UPQN06LD-
UPQN06LD- PN05
➁
➁
Lens
G (green), R (red), S (blue)
5
5
ALN2L-
ALN2L- PN05
➁
➁
➊
➊ Used for
ALN, AOLN
(LED)
A (amber), W (white), Y (yellow)
•ꢀUse the white (W) lens for pure white
illumination
ALN2LD-
ALN2LD- PN05
➁
➁
➋
➌
C (clear), G (green), R (red), S (blue)
➋ Used for
ALN, AOLN
(incandescent)
(1W)
5
5
5
5
ALN06L-
ALN06L- PN05
➁
➁
A (amber), W (white)
•ꢀUse the amber (A) lens for orange
illumination.
Plastic
ALN06LD-
ALN06LD- PN05
➁
➁
C (clear), G (green), R (red), S (blue)
➌ Used for
ALN, AOLN
(incandescent)
(2W)
ALN08L-
ALN08L- PN05
➁
➁
A (amber), W (white)
•ꢀUse the amber (A) lens for orange
illumination.
ALN08LD-
ALN08LD- PN05
➁
➁
G (green), R (red), Y (yellow)
Above colors are used for ø30
switches & pilot lights (dark colored
operator units).
For black, use black buttons from light
colored operator units.
Button
Button
Flush
5
5
ABN1B-
ABN2B-
ABN1B- PN05
➀
➀
➀
Extended
ABN2B- PN05
➀
Mushroom
2
ABN3B-
ABN3B- PN02
➀
➀
Plastic
B (black), G (green), R (red), S (blue),
Y (yellow), W (white)
Above colors are used for ø30 diecast
zinc switches & pilot lights (light
colored operator units).
Flush
5
5
2
ABN1BN-
ABN2BN-
ABN3BN-
ABN1BN- PN05
➀
➀
Extended
Mushroom
ABN2BN- PN05
➀
➀
➀
ABN3BN- PN02
➀
Button
➊ Mushroom
(ABN4)
➋ Mushroom
(ABN4G/
ABN4F)
1
1
2
2
ABN4B-
ABN4B-
➀
➀
➊
➋
➍
ABN4GB-
UBQN1B-
UBQN2B-
ABN4GB-
➀
➀
➀
➀
B (black), G (green), R (red),
Y (yellow)
Plastic
➌
Square Flush
UBQN1B- PN02
➀
➌
(UBQN1)
➍ Square
Extended
(UBQN2)
UBQN2B- PN02
➀
Note: Specify a button color code or lens color code in place of or in the Ordering No.
➀
➁
(14/03/18)
73
ø30
ø30 Series Accessories and Replacement Parts
Maintenance Parts
Package
Quantity
Shape
Description
Material
AS resin
Part No.
Ordering No.
Remarks
Button
For ø40 pushlock
turn reset
pushbuttons
(for AVN3)
1
2
R (red), Y (yellow)
AVN3B-➁
AVN3B-➁
Lens
For ø40 pushlock
turn reset
pushbuttons
(for AVLN3,
AVLNE3)
AS resin AVLN3L-R
AVLN3L-RPN02
AJN3B-➁
Red only
Lens
For ø40 pushlock
turn reset
pushbuttons
(for AJN3)
B (black), G (green),
R (red), Y (yellow)
AS resin
AS resin
Plastic
1
AJN3B-➁
Lens
For ø40 pushlock
turn reset
pushbuttons
(for AJLN3)
-G (green),
-R (red), L-Y (yellow),
L-A (amber), L-W (white)
1
AJLN3L-➁
AJLN3L-➁
Marking Plate
For UPQN4
UPQN406N-W UPQN406N-WPN05
5
Rubber Washer (3.0mm thick)
Rubber Washer (1.5mm thick)
Shroud
Rubber OW-12
Rubber OW-11
OW-12PN10
OW-11PN10
10
10
➊ Half shroud
(for pushbuttons)
ABN2G
ABN2F
ABN2G
ABN2F
1
1
➋ Full shroud
(for pushbuttons)
➊
➋
➌ Full shroud
(for mushroom
pushbuttons)
ABN3G
ABN4G
ABN3G
ABN4G
ABN4F
1
1
1
➍
➌
➍ Shallow shroud
(for jumbo mush-
rooms)
➎
Metal
➎ Deep shroud
(for jumbo mush-
rooms)
ABN4F
•ꢀFor incandescent/LED
illuminated pushbuttons
(E12 base)
➏
➐
ALN1GL
ALN2GL
ALN1F
ALN1GL
ALN2GL
ALN1F
1
1
1
1
➏ Half shroud
(for illuminated
pushbuttons)
•ꢀFor LED illuminated
pushbuttons (BA9S base)
•ꢀFor incandescent/LED
illuminated pushbuttons
(E12 base)
➐ Full shroud
(for illuminated
pushbuttons)
•ꢀFor LED illuminated push-
buttons (BA9S base)
ALN2FL
ALN2FL
Selector Knob
G (green), R (red),
S (blue)
ASLNH
AS resin
ASLNH-∗
Knob for
Illuminated
selector switch
1
A (amber), W (white),
Y (yellow)
ASLNHD
ASLNHD-∗
(14/03/18)
74
ø30
ø30
ø30 Series Accessories and Replacement Parts
Maintenance Parts
Package
Quantity
Shape
Description
Material
Metal
Part No.
Ordering No.
Remarks
Spare Key
ASN3K/4K,ABN5
ASN-T1SK-24401 ASN-T1SK-24401PN02
•ꢀApplicable to
ABN3K, ABN4K,
ABN5
2
ASN-SK-24401
TW-SK-0
ASN-SK-24401PN02
TW-SK-0PN02
ASN∗K
Spare Key
ASNK-T
ASN∗K
2
1
Transformer
Pin/Chain
100/110V AC
(for LED/1W incandescent
lamps)
TWR-016N
TWR-026N
ABN8P-PIN
TWR-016N
TWR-026N
ABN8P-PIN
Mounting screws are
not included.
200/220V AC
(for LED/1W incandescent
lamps)
1
1
For ABN8P
Metal
Pin, chain, and plate
for ABN8P
pinloock
LED Lamps
Current Draw
AC DC
7 mA
Operating
Voltage
Package
Base
Illumination
Color Code
➁
Dimensions
Part No.
Ordering No.
Quantity
1
LSTD-6
➁
A: amber
G: green
PW: pure white
R: red
S: blue
W: white
(A, R, W)
5.5 mA
6V AC/DC 10ꢀ 8 mA
LSTD-6
LSTD-1
LSTD-2
LETD-6
LETD-8
LETD-2
➁
➁
➁
➁
➁
➁
10
LSTD-6 PN10
➁
(G, PW, S)
1
LSTD-1
➁
12V AC/DC
11 mA
Base BA9S/13
10 mA
10 mA
BA9S/13
10
10ꢀ
LSTD-1 PN10
➁
Use a pure
white (PW) LED
lamp with yel-
low (Y) lens.
20.8
1
10
1
LSTD-2
➁
24V AC/DC
11 mA
10ꢀ
LSTD-2 PN10
➁
17 mA
(A, R, W, Y)
8 mA
14 mA
(A, R, W, Y)
5.5 mA
LETD-6
➁
6V AC/DC 10ꢀ
10
LETD-6 PN10
➁
(G, PW, S)
(G, PW, S)
A: amber
G: green
R: red
S: blue
W: white
Y: yellow
1
LETD-8
➁
12V AC/DC
10ꢀ
7 mA
6.5 mA
10 mA
E12/15
10
Base E12/15
LETD-8 PN10
➁
1
LETD-2
➁
24V AC/DC
10ꢀ
27
11 mA
10
LETD-2 PN10
➁
Incandescent Lamps
Rated Operating
Voltage
Package
Quantity
Dimensions
Lamp Ratings
1W (6.3V)
1W (18V)
1W (24V)
1W (30V)
2W (6.3V)
2W (18V)
2W (24V)
2W (30V)
Part No.
LS-6
LS-8
LS-2
LS-3
LE-6
LE-8
LE-2
LE-3
Life
6V AC/DC
12V AC/DC
18V AC/DC
24V AC/DC
6V AC/DC
Base BA9S/13
1
22.5
1.5
Approx. 1000 hours
minimum
(reference value)
12V AC/DC
18V AC/DC
24V AC/DC
1
Base E12/15
34
2
•ꢀSpecify a color code in place of in the Ordering No.
➁
(14/03/18)
75
ø30
ø30 Series Accessories and Replacement Parts
Transformer
DIN Rail Mount
For 1W
Primary Voltage
100/110V AC
Secondary Voltage
5.5V
Part No.
Applicable Load
TWR516
One full voltage pilot light or illuminated
switch containing LSTD-6 , LETD-6 LED
➁
➁
200/220V AC
400/440V AC
100/110V AC
200/220V AC
400/440V AC
TWR526
TWR546
TWR518
TWR528
TWR548
lamp (6V AC/DC) or LS-6 incandescent
lamp (6.3 V AC/DC, 1W)
For 2W
One full voltage pilot light or illuminated
switch containing LE-8 incandescent lamp
(18V AC/DC, 2W)
15V
Specifications
Dimensions
M3.5 Terminal Screw
100/110V AC, 115/120V AC, 200/220V AC,
230/240V AC, 380V AC, 400/440V AC,
480V AC (50/60Hz)
Operating Voltage
Current Draw
2.4 VA
Secondary Side
Primary Side
Rated Insulation
Voltage
Insulation Resistance
600V
2–ø3.3
Mounting Hole
40
48
100 MΩ minimum (500V DC megger)
Operating Temperature –30 to +60°C (no freezing)
52
Storage Temperature
Operating Humidity
–40 to +80°C (no freezing)
35 to 85ꢀ RH (no condensation)
Damage Limits: 30 Hz, amplitude 1.5 mm
Operating extremes: 5 to 55 Hz, amplitude 0.5 mm
Damage limits, Operating Extremes: 1,000 m/s2
Vibration Resistance
Terminal Cover
Shock Resistance
Dielectric Strength
Terminal Screw
Applicable Wire
Weight (approx.)
2,500V AC, 1 minute
M3.5
BAA1000
2 mm2 maximum, 2 wires maximum
87g
Accessories
DIN Rail
Part No.
Ordering No.
BAA1000PN10
BAP1000PN10
Length
Weight (approx.)
Material
Aluminum
Steel
Package Quantity
BAA1000
BAP1000
1000 mm
1000 mm
200g
320g
10
10
End Clip
Part No.
Ordering No.
Applicable DIN Rail
Weight (approx.)
15g
Material
Package Quantity
10
Dimensions
BAA1000
BAP1000
Steel
(Zinc-plated)
BNL6
BNL6PN10
45
9
•ꢀUseꢀplasticꢀendꢀclipꢀBC9Z-E/NS35Nꢀwhenꢀusingꢀ400/440VꢀACꢀprimaryꢀvoltageꢀtransformers.
(14/03/18)
76
ø30
ø30
ø30 Series Instructions
Safety Precautions
•ꢀTurn off the power to the ø30 series switches & pilot lights
before starting installation, removal, wiring, maintenance,
and inspection of the products. Failure to turn power off
may cause electrical shocks or fire hazard.
•ꢀFor wiring, use wires of a proper size to meet the volt-
age and current requirements. Tighten the M3.5 terminal
screws to a tightening torque of 1.0 to 1.3 N·m. Failure to
tighten terminal screws may cause overheat and fire.
•ꢀTo avoid a burn on your hand, use the lamp holder tool
when replacing lamps.
Instructions
Panel Mounting for Square Pushbuttons
and Pilot Lights
Panel Thickness and Rubber Washer
Adjust the thickness of the rubber washers according
to the panel thickness. Also, make sure to include the
nameplate thickness when using a nameplate.
1. Tighten the square ring to the operator and position the
ring correctly.
2. Lightly tighten the screw to secure the pilot light onto the
panel.
Applicable Models
•ꢀExtendedꢀPushbuttonsꢀwithꢀHalfꢀ
Shroud
Applicable Models
•ꢀExtendedꢀIlluminatedꢀPushbuttonsꢀ
withꢀHalfꢀShroudꢀ(LED)
•ꢀExtendedꢀIlluminatedꢀPushbuttonsꢀ
withꢀHalfꢀShroudꢀ(Incandescent)ꢀ
•ꢀExtendedꢀPushbuttonsꢀwithꢀHalfꢀ
Shroudꢀ(Diecast)
•ꢀExtendedꢀIlluminatedꢀPushbuttonsꢀ
withꢀHalfꢀShroudꢀ(Diecast)ꢀ
Panel
Thickness
(mm)
Supplied
0.8
Rubber Washer
Recommended tightening
torque: 0.15 N·m
1.5mm
3.0mm
Rubber Washer
1.5mm 3.0mm
1 piece 1 piece
Panel
Thickness (mm)
1 piece
1 piece
–
1 piece
1 piece
1 piece
–
Supplied
0.8 to 1.8
1.8 to 3.5
Tightening Torque for Terminal Screws
0.8 to 2.3
2.3 to 4.0
–
1 piece
–
Tighten the terminal screws to a torque of 1.0 to 1.3 N·m.
1 piece
1 piece
Applicable Models
•ꢀExtendedꢀPushbuttonsꢀwithꢀFullꢀ
Shroudꢀ
Applicable Models
Replacement of Lamps
•ꢀExtendedꢀIlluminatedꢀPushbuttonsꢀ
withꢀFullꢀShroudꢀ(Incandescent)
•ꢀExtendedꢀIlluminatedꢀPushbuttonsꢀ
withꢀFullꢀShroudꢀ(LED)
•ꢀExtendedꢀIlluminatedꢀPushbuttonsꢀ
withꢀFullꢀShroudꢀ(Diecast)ꢀ
•ꢀMushroomꢀPushbuttonsꢀwithꢀFullꢀ
Shroudꢀ
Lamps can be replaced by using the lamp holder tool (OR-
55) from the front of the panel.
Panel
Thickness
(mm)
Rubber Washer
1.5mm 3.0mm
How to Remove
To remove, slip the lamp holder tool onto the lamp head
lightly. Then push slightly, and turn the lamp holder tool
counterclockwise.
Supplied
0.8 to 1.5
1.5 to 3.0
3.0 to 4.5
4.5 to 6.0
6.0 to 7.5
3 pieces 1 piece
3 pieces 1 piece
2 pieces 1 piece
Rubber Washer
1.5mm 3.0mm
2 pieces 1 piece
1 piece 1 piece
1 piece 1 piece
Panel Thickness
(mm)
How to Install
1 piece
–
1 piece
1 piece
–
To install, insert the lamp head into the lamp holder tool.
Place the pins on the lamp base to the grooves in the
lamp socket. Inset the lamp and turn it clockwise.
Supplied
0.8 to 2.0
2.0 to 3.5
3.5 to 5.0
1 piece
Applicable Models
–
1 piece
–
•ꢀExtendedꢀPushbuttonsꢀwithꢀFullꢀ
Shroudꢀ(Diecast)
ꢀ
5.0 to 6.0 (6.5) 1 piece
Panel
Thickness
(mm)
Rubber Washer
1.5mm 3.0mm
2 pieces 1 piece
The number in brackets is for mush-
room pushbuttons with full shroud.
Extended illuminated pushbuttons
with full shroud (incandescent) are
5.0 mm maximum.
Supplied
0.8 to 2.5 2 pieces 1 piece
2.5 to 4.0 1 pieces 1 piece
OR-55
Applicable Models
•ꢀToggleꢀLever
•ꢀKnobꢀPushꢀTurnꢀLockꢀIlluminatedꢀ
Pushbuttons
4.0 to 5.5
–
1 piece
–
5.5 to 6.0 1 piece
Installing the Anti-rotation Ring
Applicable Models
•ꢀOtherꢀModelsꢀ(ExcludingꢀSquare)
Rubber Washer
1.5mm 3.0mm
1 piece 1 piece
1 piece 1 piece
Panel Thickness
(mm)
ꢀ
Anti-rotation rings are used
on selector switches or
pushbuttons which rotate
and used when using no
nameplates.
Insert a 1.5mm thick rubber
washer between the panel
and the anti-rotation ring as
shown on the right.
Panel
OGL11
Panel
Thickness
(mm)
Rubber Washer
1.5mm 3.0mm
Supplied
0.8 to 2.0
2.0 to 3.5
–
1 piece
–
Supplied
0.8 to 3.5
3.5 to 5.0
5.0 to 6.5
6.5 to 7.5
2 pieces 1 piece
2 pieces 1 piece
3.5 to 5.5 (5.0)
1 piece
The number in brackets is for knob
push turn lock illuminated pushbut-
tons.
1 piece
–
1 piece
1 piece
–
1 piece
Rubber Washer
(14/03/18)
77
ø30
ø30 Series Instructions
Installation of LED Illuminated Units
1. Note the polarity for wiring when connecting to DC-DC
converter unit.
3. Notes for Pure White LED Lamps
•ꢀDo not use the pure white LED outdoors, otherwise it will
lead to the degradation of brightness and color. Do not
remove or apply shock to the cap on the pure white LED
lamp, otherwise it may break or damage the cap.
Terminal No.
Polarity
Positive
Negative
X1
X2
•ꢀFor the pure white LED, use a white lens. The illumination
color will be dull if a different color is used.
2. Transformer units are recommended for use in areas
subjected to noise.
[Protection Example 1] For AC circuit
Notes on LED Illuminated Units
LED lamps consist of semiconductors. If the applied
voltage exceeds the rated voltage, LED elements may
deteriorate due to overheat, resulting in significant
LED with
transformer
decrease in luminance, hue change, or failure of lighting.
Also, if an extraneous noise, transient voltage, or transient
current is applied to the circuit, similar effects may occur.
When using LED lamps, observe the following instructions.
C
R
C
R
LED with
transformer
Relay
coil or
LED
Ry
LED
solenoid
Rated Voltage
(Reference values) R: 120Ω
C: 0.1 μF
The LED lamps are rated at 6V, 12V, or 24V AC/DC, and
can be used within 10ꢀ the rated voltage of either AC or
DC.
[Protection Example 2] For DC circuit
+
DC Power
1. Switching power supply
(Reference values of the diode)
Forward current: More than the Ry coil current
Reverse withstand voltage: Ry coil current ¥ 10
Regulated voltage from switching power supply is best
suited. Make sure to use within the rated voltage of the
LED lamp.
Relay
Diode
Ry
LED
coil or
solenoid
2. Rechargeable battery
–
Note that the battery voltage may exceed the rated volt-
age of the LED lamp while the battery is being charged
and immediately after the charging is complete. Be sure
to use the LED lamp on a voltage of 10ꢀ the rated
voltage.
Countermeasures against Dim Lighting
1. Leakage currents through the transistors or a contact
protection circuit may cause the LED lamp to illuminate
dimly even when the output is off.
2. When the LED lamp is illuminated by a transistor output,
take the following measure.
3. Full-wave rectification
Since the LED lamp is AC/DC compatible, a diode
bridge for rectification is not necessary. If the LED lamp
is used on a full-wave rectification current through a
diode bridge, the rectifier diodes will reduce the voltage,
resulting in lower luminance.
[Circuit Example]
Connect shunt resistor R in parallel with the LED lamp.
4. Single-phase half-wave rectification
This is not suitable for the power source of LED lamps.
Use constant-voltage DC power.
R
LED
Noise
Io
LED elements deteriorate due to extraneous noise, result-
ing in significant decrease in luminance, hue change, or
failure of lighting. When such effects are anticipated, take a
protection measure shown below, such as RC elements or
a surge absorber.
Io: Leakage current when the output is off
R: Shunt resistor
(14/03/18)
78
相关型号:
ABBN3322
Heavy duty switches & pilot lights offer both variety and reliability Endures harsh environments
ETC
©2020 ICPDF网 联系我们和版权申明