AC-1025 [ETC]

(1.07 M) ;
AC-1025
型号: AC-1025
厂家: ETC    ETC
描述:

(1.07 M)

文件: 总20页 (文件大小:1097K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Mains 50/60Hz Current Transformers •  
Primary Current Ratings to 200 Amps •  
20kHz to 200kHz Current Sense Inductors and Transformers •  
Current Sense Transformers and Inductors  
Design and Manufacturing Facilities  
http://www.talema-nuvotem.com  
Czech Republic  
TALEMA ELECTRONIC s.r.o.  
Jablonského 7  
Germany  
TALEMA ELEKTRONIK GMBH  
Riesstr. 8, Postfach 2523  
82110 Germering  
Ireland  
India  
NUVOTEM TEO.  
Crolly  
TALEMA ELECTRONIC PVT. LTD.  
No. 30, 31 Electronic Industrial Estate  
Suramangalam  
301 45 Plzeñ  
Co. Donegal  
Tel: Int. + 420 19 - 744 9303  
Fax: Int. + 420 19 - 744 3697  
Email: info@talema.cz  
Tel: Int. + 49 89 - 841 00 - 0  
Fax: Int. + 49 89 - 841 00 25  
Email: info@talema.isar.de  
Tel: Int. + 353 75 - 48 666  
Fax: Int. + 353 75 - 48 139  
Email: info@nuvotem.com  
Salem - 636 005, Tamil Nadu  
Tel: Int. + 91 427 - 341 950  
Fax: Int. + 91 427 - 340 912  
E-mail: talema@md3.vsnl.net.in  
THE TALEMA GROUP  
World Wide Toroidal Specialists  
AS Series • Current Sense Inductors & Transformers  
AS Series Current Sensors are designed as a low cost method  
of controlling, monitoring or measuring AC currents. The  
sensors serve as feedback elements between the output and  
pulse control circuitry providing accurate regulation of switch  
mode power supplies.  
Features  
Fully encapsulated for optimal PC board mounting  
• Frequency range from 20kHz to 200kHz  
• Primary current rating to 15 Amps  
• Primary to secondary isolated to 2500 VAC  
• Meets VDE norms  
• Optimum performance over designated current and  
frequency range  
• Competitive pricing due to high volume production  
• Manufactured in ISO-9001 approved facility  
Applications  
Isolated current feed-back signal in Switch Mode Power Supplies • Motor current load/overload • Lighting  
• Switch Controls Ultra-  
sound current  
High resolution sonar current  
Isolated bi-directional current sensor with full wave bridge rectifier  
Electrical Specifications at 25°C  
Sec. Term. (2  
Resistance  
)
(1)  
(3)  
Prim./Sec.  
Part Number  
L
DCR  
I
sec  
Volt µS (4)  
Max.  
sec  
sec  
Schematic  
Ratio  
(mH Min)  
(Ohms Max.)  
Max.  
(Ohms Nom.)  
50  
AS-100  
AS-101  
AS-102  
AS-103  
AS-104  
AS-110  
AS-111  
AS-112  
AS-113  
AS-114  
1:50  
1:100  
6
0.6  
1.1  
300mA  
150mA  
75mA  
50mA  
30mA  
300mA  
150mA  
75mA  
50mA  
30mA  
175  
350  
700  
900  
1500  
175  
350  
700  
900  
1500  
1
3
25  
100  
1:200  
100  
250  
700  
6
4.5  
200  
1:300  
10.0  
300  
1:500  
25.0  
500  
1:50CT  
1:100CT  
1:200CT  
1:300CT  
1:500CT  
0.3 / 0.3  
0.55 / 0.55  
2.25 / 2.25  
5.0 / 5.0  
12.5 / 12.5  
25 + 25  
50 + 50  
100 + 100  
150 + 150  
250 + 250  
1
2
3
25  
100  
250  
700  
17.2  
Notes:  
(0.677)  
1) Lsec: Secondary inductance tested at 10kHz and 10mV.  
5.0  
(0.197)  
2) This nominal termination resistance value will yield approximately 1.0V  
17.0  
20.4  
(0.803)  
of output for each amp of current in a single turn sense line. The output  
Voltage/Ampere of these devices can be increased or decreased linearly  
over a restricted temperature range by adjusting the terminating resis-  
tance.  
(0.669)  
TALEMA  
ASXXX  
2
1
3
0.60 Ø  
(0.024)  
4 .0 (0.157)  
6.35  
(0.250)  
3) The Isec value corresponds to a maximum primary current of 15 Amp-  
turns RMS.  
12.7  
(0.500)  
+
Operat  
1
2F  
4) VµS = Rt x Is x  
Rt (Ohms): Recommended Terminating Resistance  
Is (A): Secondary Current  
9.53  
(0.375)  
1
2
_
3
_
F (Hz): Frequency  
5) Operating Temperature Range: -40°C to +120°C  
+
6) Pin 2 is on Center-Tapped (CT) versions only  
Primary Sense Current  
THE TALEMA GROUP  
World Wide Toroidal Specialists  
(06-01) AS Series  
AS Series Current -Sense Inductors & Transformers  
Electrical Specifications at 25°C  
Sec. Term. (2)  
Resistance  
(1)  
(3)  
Part Number  
Prim./Sec.  
Ratio  
L
DCR  
I
sec  
Volt µS (4)  
Max.  
sec  
sec  
Schematic  
(mHMin.) (Ohms Max.)  
Max.  
(Ohms Nom.)  
Type 1  
Type 2  
AS-300  
AS-301  
AS-302  
AS-310  
AS-311  
AS-312  
AS-320  
AS-321  
AS-322  
AS-330  
AS-331  
AS-332  
3
AS-200  
AS-201  
AS-202  
AS-210  
AS-211  
AS-212  
1:50  
1:100  
5
0.65  
1.30  
4.50  
0.65  
1.30  
4.50  
0.65  
1.30  
4.50  
0.65  
1.30  
4.50  
50  
100  
300mA  
150mA  
75mA  
175  
350  
700  
175  
350  
700  
175  
350  
700  
175  
350  
700  
1
2
20  
80  
5
1:200  
200  
5
3
1:50CT  
1:100CT  
1:200CT  
1:50  
25 + 25  
50 + 50  
100 + 100  
50  
300mA  
150mA  
75mA  
1
2
20  
80  
5
4
5
3
1
2
6
7
300mA  
150mA  
75mA  
1:100  
20  
80  
5
100  
1:200  
200  
5
1
2
6
7
3
1:50CT  
1:100CT  
1:200CT  
25 + 25  
50 + 50  
100 + 100  
300mA  
150mA  
75mA  
4
20  
80  
5
Type 1  
Type 2  
17.8  
(0.700)  
14.50  
(0.571)  
12.7  
(0.500)  
10.15  
(0.400)  
17.8  
(0.700)  
4.0  
(0.157)  
18.0  
(0.709)  
4.0  
(0.157)  
6.35  
(0.250)  
5.08  
(0.200)  
3
4
5
3
4
5
Pins 1 & 2  
Ø 1.30 (0.051)  
12.7  
(0.500)  
15.25  
(0.600)  
Pins 1, 2, 6 & 7  
Ø 1.30 (0.051)  
19.60  
(0.772)  
22.9  
(0.902)  
17.8  
(0.700)  
6
7
Pins 3, 4 &5  
Ø 1.00 (0.039)  
1
2
Pins 3, 4 &5  
Ø 0.80 (0.032)  
1
2
Features  
Meets requirements of IEC 950 and VDE norms  
UL94, VO recognized materials  
Operating frequency range from 20kHz to 200kHz  
Operating Temperature Range: -40°C to +120°C  
Primary to secondary isolated to 4000 VAC  
Primary current rating to 80 Amps  
Electrical Specifications at 25°C  
Dimensions  
Part  
Pri./Sec.  
Ratio  
I
Volt µS  
Case  
Type  
P
Application  
Schematic  
Number  
Amps (Max.)  
C
D
E
F
G
H
I
Hole  
AS-400  
AS-401  
AS-402  
1:100  
1:100  
1:100  
1
2
5
350  
550  
Switching  
Switching  
Switching  
A
A
B
17.8  
23.0  
32.5  
12.8  
15.5  
18.0  
20.0  
25.0  
35.5  
10.0  
12.5  
15.0  
5.0  
15.0  
20.0  
--  
5.0  
5.0  
--  
--  
--  
--  
1
2
7
10.0  
12.5  
8
7
8
1500  
1
2
3
4
AS-403  
1:100  
10  
1500  
Switching  
A
32.0  
20.5  
35.0  
17.5  
12.5  
27.5  
7.5  
--  
AS-404  
AS-405  
AS-406  
AS-407  
1:100  
1:500  
1:500  
1:500  
50  
50  
65  
80  
1500  
2700  
4200  
7500  
Switching  
Switching  
Switching  
Switching  
B
A
A
B
32.5  
23.0  
27.0  
32.5  
18.0  
15.5  
18.0  
18.0  
35.5  
25.0  
30.0  
35.5  
15.0  
12.5  
15.0  
15.0  
12.5  
10.0  
12.5  
12.5  
--  
--  
Ø 8  
Ø 5  
Ø 5  
Ø 8  
7
8
20.0  
22.5  
--  
5.0  
5.0  
--  
Type A  
Type B  
3.5 ±0.3  
5.0 ±0.3  
7
8
G
H
G
C
C
3
4
2
I
1
0.60 x 0.88 mm  
F
F
D
E
0.60 x 0.88 mm  
E
D
(AS-403 0.75 x 1.10)  
Germany: Int.+4989-841 00-0 Ireland: Int.+35 375-48 666 Czech Rep: Int.+420 19-744 9303 India: Int.+91 427-341 950  
http://www.talema-nuvotem.com  
(06-01) AS Series  
1
ASM Series Current Sensor for 50/60 Hz  
ASM Series current sensors operate as the sealed secondary of a current transformer while  
the conductor carrying the current to be measured functions as a one turn primary. Measurement  
accuracy can be improved by increasing the number of primary turns. Applications include  
detection of branch circuit overload and load drop or shutdown.  
Features  
Competitive pricing due to high volume  
production  
Fully encapsulated for optimal PC board mtg.  
Mains frequency of 50/60 Hz  
Manufactured in ISO-9001 approved  
facility  
Primary current ratings from 1 to 100 Amps  
Primary to secondary isolated to 2500 VAC  
Operating temperature range: -40°C to +120°C  
ASM-010  
Typical Response  
ASM-010  
Part  
Current  
Output Voltage  
Ø 5.0  
(0.197)  
17.0  
40  
35  
30  
25  
20  
15  
10  
5
Number  
ASM-010  
ASM-020  
ASM-030  
ASM-050  
ASM-075  
ASM-100  
Range  
Tolerance  
±10%  
±10%  
±10%  
±10%  
(0.669)  
20.4  
1 - 10 Amps  
1 - 20 Amps  
1 - 30 Amps  
5 - 50Amps  
5 - 75 Amps  
5 - 100 Amps  
TALEMA  
(0.803)  
ASM-010  
1
3
0.60 Ø  
(0.024)  
4 .0 (0.157)  
12.7  
(0.500)  
±10%  
±10%  
9.53  
(0.375)  
1
3
ASM-020  
17.20  
0
(0.677)  
Ø 5.0  
1
2
4
6
8
10  
12  
(0.197)  
Current (Amps)  
25.0  
(0.984)  
ASM-010 & ASM-020  
ASM-020  
80  
70  
60  
50  
40  
30  
20  
10  
E
20.0  
(0.787)  
3.5  
(0.138)  
0.60x0.88 mm  
(0.024x0.035)  
1
8
4
5
15.5  
(0.610)  
12.5  
(0.492)  
Output  
Voltage  
(mV)  
50 ohms  
23.0  
(0.906)  
0
ASM-030  
1
2
4
6
8 10 12 14 16 18 20 22 24  
Current (Amps)  
Ø
9.27  
ASM-030  
(0.365)  
80  
70  
60  
50  
40  
30  
20  
10  
0
E
25.4  
(1.00)  
TALEMA  
ASM-030  
0.80 Ø  
(0.031)  
3
2
5.0 (0.197)  
1
1
3
2
Output  
Voltage  
(mV)  
15.24  
(0.600)  
220 ohms  
7.62  
(0.301)  
3
11.18  
(0.440)  
1
2
1.78  
(0.070)  
25.15  
(0.99)  
1
5
10 15 20 25 30 35 40  
Current (Amps)  
Note: Pin #3 is Blank  
ASM-050, ASM-075 & ASM-100  
ASM-050, ASM-075 & ASM-100  
Ø 8.0  
(0.315)  
17.5  
(0.689)  
135  
120  
105  
90  
75  
60  
45  
30  
15  
0
3.5  
(0.138)  
7
8
E
27.5  
(1.085)  
32.0  
(1.260)  
3
1
4
2
1
2
20.5  
(0.807)  
7.50  
(0.295)  
35.0  
(1.378)  
Output  
Voltage  
(mV)  
0.75 x 1.10 mm  
(0.030 x 0.043)  
220 ohms  
5
20  
40  
60  
80  
100  
Current (Amps)  
Germany: Int.+4989-841 00-0 Ireland: Int.+35 375-48 666 Czech Rep: Int.+420 19-744 9303 India: Int.+91 427-341 950  
http://www.talema-nuvotem.com  
(02-02) ASM Series  
2
AC Series Current Transformer Quick Reference Guide  
Low Cost 50/60Hz Current Transformers  
Applications  
Sensing Overload Current  
Ground fault detection  
Metering  
Analog to Digital Circuits  
Features  
Excellent quality at extremely competetive price due to high  
volume production  
Manufactured in an ISO-9001 approved Talema facility  
Electrical Specifications @ 20°C ambient  
AC Series Standard Accuracy Current Transformers  
Terminating  
Resistor  
DCR  
(Ohms)  
Volts/Amp @ rated I  
for various loads (Ohms)  
Net  
Weight  
P
RCF  
Iex  
Vex  
Case Dimensions - mm  
ID  
IP  
Turns  
Ratio  
Part No.  
Amps  
Ohms Watt Nominal @ 10% 100  
500 2K  
5K µArms Vrms (grams)  
L
H
W
C
D
AC1005  
AC1010  
AC1015  
AC1020  
AC1025  
AC1030  
5
1000:1 100 0.0025  
41.80  
41.80  
41.80  
41.80  
48.00  
48.00  
49.3  
1.010 0.10 0.46 1.43 2.01  
1.010 0.10 0.45 1.10 1.42  
1.010 0.10 0.45 0.90 1.12  
1.010 0.10 0.43 0.76 0.93  
10.20 0.10 0.47 1.06 1.31  
1.020 0.10 0.47 0.95 1.16  
1.026 0.10 0.46 0.87 1.05  
237  
386  
513  
628  
566  
644  
914  
0.66  
1.32  
1.99  
2.65  
3.65  
4.38  
5.82  
7.28  
7.41  
9.26  
16.3  
16.3  
16.3  
16.3  
35.5  
35.5  
47.3  
47.3  
65.2  
65.2  
80.0  
23.80 9.50 23.80 11.12 15.24 7.62  
23.80 9.50 23.80 11.12 15.24 7.62  
23.80 9.50 23.80 11.12 15.24 7.62  
23.80 9.50 23.80 11.12 15.24 7.62  
30.20 11.40 30.20 14.30 20.32 10.16  
30.20 11.40 30.20 14.30 20.32 10.16  
34.90 14.60 34.90 14.30 25.40 10.16  
34.90 14.60 34.90 14.30 25.40 10.16  
38.10 14.60 38.10 15.90 33.00 10.16  
38.10 14.60 38.10 15.90 33.00 10.16  
44.50 19.05 44.50 14.30 35.56 10.16  
10 1000:1 100 0.0100  
15 1000:1 100 0.0230  
20 1000:1 100 0.0400  
25 1000:1 100 0.0630  
30 1000:1 100 0.0900  
AC1040 40 1000:1 100 0.1600  
AC1050  
AC1060  
AC1075  
50 1000:1 100 0.2500  
60 1000:1 100 0.3600  
75 1000:1 100 0.5700  
49.3  
1.026 0.10 0.43 0.76 0.90 1090  
1.001 0.10 0.44 0.66 0.76 1250  
1.001 0.10 0.39 0.57 0.65 1520  
24.00  
24.00  
21.30  
11.00  
11.00  
AC1100 100 1000:1 100 1.0000  
AC1150 150 1000:1 100 2.2500  
AC1200 200 1000:1 100 4.0000  
1.001 0.10 0.34 0.50 0.56 1740 12.00  
1.002 0.10 0.37 0.50 0.55 1820 16.60 150.0 55.60 23.80 55.60 20.60 45.72 12.70  
1.002 0.10 0.31 0.41 0.45 2340 22.20 150.0 55.60 23.80 55.60 20.60 45.72 12.70  
IP : Primary Current  
RL: Terminating Resistor  
lex and Vex: Excitation current & voltage at rated operating conditions  
RCF: Ratio correction factor - Multiply current readings by this factor to  
compensate for transformer losses.  
Dimensions  
Notes:  
W
L
1) Unless requested, the terminating resistor and the one-turn primary  
are not supplied  
2) Pin 3: Normally for mechanical support only but will be used on  
center tapped designs  
3) Each part number adjusted to be most accurate at specified load.  
H
TALEMA INDIA  
W/Y  
AC1xxx  
5±1mm  
ID min.  
IP  
IS  
2
3
1
1
3
2
C
I - Turn  
Primary  
RL  
VL  
Terminal Diameter:  
AC1005 - AC1020 - Ø 0.813  
AC1025 - AC1200 - Ø 1.016  
D
Design and Manufacturing Facilities  
http://www.talema-nuvotem.com  
Czech Republic  
TALEMA ELECTRONIC s.r.o.  
Jablonského 7  
Germany  
TALEMA ELEKTRONIK GMBH  
Riesstr. 8, Postfach 2523  
82110 Germering  
Ireland  
India  
NUVOTEM TEO.  
Crolly  
TALEMA ELECTRONIC PVT. LTD.  
No. 30, 31Electronic Industrial Estate  
Suramangalam  
301 45 Plzeñ  
Co. Donegal  
Tel: Int. + 420 19 - 744 9303  
Fax: Int. + 420 19 - 744 3697  
Email: info@talema.cz  
Tel: Int. + 49 89 - 841 00 - 0  
Fax: Int. + 49 89 - 841 00 25  
Email: info@talema.isar.de  
Tel: Int. + 353 75 - 48 666  
Fax: Int. + 353 75 - 48 139  
Email: info@nuvotem.com  
Salem - 636 005, Tamil Nadu  
Tel: Int. + 91 427 - 341 950  
Fax: Int. + 91 427 - 340 912  
E-mail: talema@md3.vsnl.net.in  
Germany: Int.+4989-841 00-0 Ireland: Int.+35 375-48 666 Czech Rep: Int.+420 19-744 9303 India: Int.+91 427-341 950  
http://www.talema-nuvotem.com  
CTs\ACCatalog 05-00  
3
AC1005 5 Amp Current Transformer  
Low Cost 50/60Hz Current Transformers  
Applications  
Sensing Overload Current  
Ground fault detection  
Metering  
Analog to Digital Circuits  
Electrical Specifications @ 20°C ambient  
Electrical Specifications  
Primary Current  
Turns Ratio  
5A nom., 60A max.  
1000:1 nominal  
0.100 V/A  
Volt per Amp Ratio at 5A for 100 ohm load  
Volt per Amp Ratio at 0.5A for 100 ohm load  
DC Resistance at 20°C  
0.096 V/A  
41.8 ohms  
Dielectric Withstanding Voltage (Hi-pot)  
Mechanical Specifications  
4KVrms  
Environmental Specifications  
Case  
Polycarbonate  
Storage Temperature  
Insulation Resistance  
-55° to +130°C  
Encapsulant  
Flammibility  
Terminals  
Epoxy  
100 megohms min.  
Conforms to UL94-VO  
%RE vs RL at Rated primary current  
(AC1005)  
Pins Ø 0.80mm  
TALEMA  
Date Code (W/Y)  
AC1005, Dot at start pin  
10000  
1000  
100  
Marking  
Approximate Weight  
Tolerance  
16.3 grams  
±0.2mm  
Output Volts vs Input Current  
For various ohmic loads  
100  
10  
10  
Infinity  
0
100  
200  
Percent ratio error in %  
300  
400  
10K  
2K  
5K  
500  
200  
1K  
Typical Excitation Curve  
(AC1005~AC1020)  
100  
50  
1
0.1  
100  
10  
1
0.01  
1
10  
100  
Input Current in Amps  
Dimensions  
11.12  
23.80  
0.1  
0.01  
0.1  
1
10  
100  
1000  
Sec RMS Exciting current in mA  
Notes:  
1) Unless requested, the terminating resistor and the one-turn  
primary are not supplied  
TALEMA INDIA  
W/Y  
AC1005  
2) Pin 3: Normally for mechanical support only but will be  
used on center tapped designs  
5±1mm  
Ø9.50  
2
3
1
Ø 0.813  
1
15.24  
1.75  
I - Turn  
Primary  
5mA  
5A  
0.5V  
1/8W  
100 ohms  
RL  
7.62  
2
THE TALEMA GROUP  
World Wide Toroidal Specialists  
4
AC1010 10 Amp Current Transformer  
Low Cost 50/60Hz Current Transformers  
Applications  
Sensing Overload Current  
Ground fault detection  
Metering  
Analog to Digital Circuits  
Electrical Specifications @ 20°C ambient  
Electrical Specifications  
Primary Current  
10A nom., 60 A max.  
1000:1 nominal  
0.100 V/A  
Turns Ratio  
Volt per Amp Ratio at 10A for 100 ohm load  
Volt per Amp Ratio at 1A for 100 ohm load  
DC Resistance at 20°C  
0.097 V/A  
41.8 ohms  
Dielectric Withstanding Voltage (Hi-pot)  
4KVrms  
Mechanical Specifications  
Polycarbonate  
Environmental Specifications  
Case  
Storage Temperature  
Insulation Resistance  
-55° to +130°C  
Encapsulant  
Flammibility  
Terminals  
Epoxy  
100 megohms min.  
Conforms to UL94-VO  
Pins Ø 0.80mm  
TALEMA  
Date Code (W/Y)  
1010, Dot at start pin  
%RE vs RL at Rated primary current  
(AC1010)  
Marking  
10000  
1000  
100  
Approximate Weight  
Tolerance  
16.3 grams  
±0.2mm  
Output Volts vs Input Current  
For various ohmic loads  
100  
10  
10  
Infinity  
0
100  
200  
300  
400  
500  
600  
10K  
2K  
5K  
Percent ratio error in %  
500  
200  
1K  
Typical Excitation Curve  
(AC1005~AC1020)  
50  
100  
1
0.1  
100  
10  
1
0.01  
1
10  
100  
Input Current in Amps  
Dimensions  
11.12  
23.80  
0.1  
0.01  
0.1  
1
10  
100  
1000  
Sec RMS Exciting current in mA  
Notes:  
TALEMA INDIA  
W/Y  
1) Unless requested, the terminating resistor and the one-turn  
primary are not supplied  
2) Pin 3: Normally for mechanical support only but will be  
used on center tapped designs  
AC1010  
5±1mm  
Ø9.50  
2
3
1
Ø 0.813  
15.24  
1
1.75  
I - Turn  
Primary  
10mA  
2
10A  
RL  
1.0V  
1/8W  
100 ohms  
7.62  
Germany: Int.+4989-841 00-0 Ireland: Int.+35 375-48 666 Czech Rep: Int.+420 19-744 9303 India: Int.+91 427-341 950  
http://www.talema-nuvotem.com  
CTs\ACCatalog 05-00  
5
AC1015 15 Amp Current Transformer  
Low Cost 50/60Hz Current Transformers  
Applications  
Sensing Overload Current  
Ground fault detection  
Metering  
Analog to Digital Circuits  
Electrical Specifications @ 20°C ambient  
Electrical Specifications  
Primary Current  
Turns Ratio  
15A nom., 60 A max.  
1000:1 nominal  
0.100 V/A  
Volt per Amp Ratio at 15A for 100 ohm load  
Volt per Amp Ratio at 1.5A for 100 ohm load  
DC Resistance at 20°C  
0.097 V/A  
41.8 ohms  
Dielectric Withstanding Voltage (Hi-pot)  
4KVrms  
Mechanical Specifications  
Polycarbonate  
Environmental Specifications  
Case  
Storage Temperature  
Insulation Resistance  
-55° to +130°C  
Encapsulant  
Flammibility  
Terminals  
Epoxy  
100 megohms min.  
Conforms to UL94-VO  
Pins Ø 0.80mm  
%RE vs RL at Rated primary current  
TALEMA  
Date Code (W/Y)  
AC1015, Dot at start pin  
(AC1015)  
Marking  
10000  
1000  
100  
Approximate Weight  
Tolerance  
16.3 grams  
±0.2mm  
Output Volts vs Input Current  
For various ohmic loads  
100  
10  
10  
Infinity  
0
200  
400  
600  
800  
10K  
2K  
5K  
Percent ratio error in %  
500  
200  
1K  
Typical Excitation Curve  
(AC1005~AC1020)  
50  
100  
1
0.1  
100  
10  
1
0.01  
1
10  
100  
Input Current in Amps  
Dimensions  
11.12  
23.80  
0.1  
0.01  
0.1  
1
10  
100  
1000  
Sec RMS Exciting current in mA  
Notes:  
1) Unless requested, the terminating resistor and the one-turn  
primary are not supplied  
TALEMA INDIA  
W/Y  
AC1015  
2) Pin 3: Normally for mechanical support only but will be  
used on center tapped designs  
5±1mm  
Ø9.50  
2
3
1
Ø 0.813  
1
15.24  
1.75  
I - Turn  
Primary  
15mA  
2
15A  
RL  
1.5V  
1/8W  
100 ohms  
7.62  
THE TALEMA GROUP  
World Wide Toroidal Specialists  
6
AC1020 20 Amp Current Transformer  
Low Cost 50/60Hz Current Transformers  
Applications  
Sensing Overload Current  
Ground fault detection  
Metering  
Analog to Digital Circuits  
Electrical Specifications @ 20°C ambient  
Electrical Specifications  
Primary Current  
20A nom., 60 A max.  
1000:1 nominal  
0.100 V/A  
Turns Ratio  
Volt per Amp Ratio at 20A for 100 ohm load  
Volt per Amp Ratio at 2A for 100 ohm load  
DC Resistance at 20°C  
0.097 V/A  
41.8 ohms  
Dielectric Withstanding Voltage (Hi-pot)  
4KVrms  
Mechanical Specifications  
Polycarbonate  
Environmental Specifications  
Case  
Storage Temperature  
Insulation Resistance  
-55° to +130°C  
Encapsulant  
Flammibility  
Terminals  
Epoxy  
100 megohms min.  
Conforms to UL94-VO  
Pins Ø 0.80mm  
%RE vs RL at Rated primary current  
(AC1020)  
TALEMA  
Date Code (W/Y)  
AC1020, Dot at start pin  
Marking  
10000  
1000  
100  
Approximate Weight  
Tolerance  
16.3 grams  
±0.2mm  
Output Volts vs Input Current  
For various ohmic loads  
100  
10  
10  
Infinity  
0
200  
400  
600  
800  
1000  
10K  
2K  
5K  
Percent ratio error in %  
500  
200  
1K  
100  
50  
Typical Excitation Curve  
(AC1005~AC1020)  
1
0.1  
100  
10  
1
0.01  
1
10  
100  
Input Current in Amps  
Dimensions  
11.12  
23.80  
0.1  
0.01  
0.1  
1
10  
100  
1000  
Sec RMS Exciting current in mA  
Notes:  
1) Unless requested, the terminating resistor and the one-turn  
primary are not supplied  
TALEMA INDIA  
W/Y  
AC1020  
2) Pin 3: Normally for mechanical support only but will be  
used on center tapped designs  
5±1mm  
Ø9.50  
2
3
1
Ø 0.813  
1
15.24  
1.75  
I - Turn  
Primary  
RL  
1/8W  
100 ohms  
20mA  
2
20A  
2.0V  
7.62  
Germany: Int.+4989-841 00-0 Ireland: Int.+35 375-48 666 Czech Rep: Int.+420 19-744 9303 India: Int.+91 427-341 950  
http://www.talema-nuvotem.com  
CTs\ACCatalog 05-00  
7
AC1025 25 Amp Current Transformer  
Low Cost 50/60Hz Current Transformers  
Applications  
Sensing Overload Current  
Ground fault detection  
Metering  
Analog to Digital Circuits  
Electrical Specifications @ 20°C ambient  
Electrical Specifications  
Primary Current  
Turns Ratio  
25A nom., 75A max.  
1000:1 nominal  
0.100 V/A  
Volt per Amp Ratio at 25A for 100 ohm load  
Volt per Amp Ratio at 2.5A for 100 ohm load  
DC Resistance at 20°C  
0.098 V/A  
48 ohms  
Dielectric Withstanding Voltage (Hi-pot)  
Mechanical Specifications  
4KVrms  
Environmental Specifications  
Case  
Polycarbonate  
Storage Temperature  
Insulation Resistance  
-55° to +130°C  
Encapsulant  
Flammibility  
Terminals  
Epoxy  
100 megohms min.  
Conforms to UL94-VO  
%RE vs RL at Rated primary current  
(AC1025)  
Pins Ø 1.0mm  
TALEMA  
Date Code (W/Y)  
AC1025, Dot at start pin  
10000  
1000  
100  
Marking  
Approximate Weight  
Tolerance  
35.5 grams  
±0.2mm  
Output Volts vs Input Current  
For various ohmic loads  
100  
10  
1
10  
Infinity  
0
100  
200  
300  
400  
500  
600  
10K  
5K  
Percent ratio error in %  
2K  
Typical Excitation Curve  
(AC1025~AC1030)  
1K  
100  
10  
1
500  
200  
100  
50  
0.1  
1
10  
100  
Input Current in Amps  
Dimensions  
14.30  
30.20  
0.1  
0.01  
0.1  
1
10  
100  
Sec RMS Exciting Current in mA  
Notes:  
1) Unless requested, the terminating resistor and the one-turn  
primary are not supplied  
TALEMA INDIA  
W/Y  
AC1025  
2) Pin 3: Normally for mechanical support only but will be  
used on center tapped designs  
5±1mm  
Ø11.40  
2
3
1
Ø 1.016  
1
20.32  
2.08  
I - Turn  
Primary  
RL  
1/8W  
100 ohms  
25A  
3
2
2.5V  
10.16  
25mA  
THE TALEMA GROUP  
World Wide Toroidal Specialists  
8
AC1030 30 Amp Current Transformer  
Low Cost 50/60Hz Current Transformers  
Applications  
Sensing Overload Current  
Ground fault detection  
Metering  
Analog to Digital Circuits  
Electrical Specifications @ 20°C ambient  
Electrical Specifications  
Primary Current  
30A nom., 75A max.  
1000:1 nominal  
0.100 V/A  
Turns Ratio  
Volt per Amp Ratio at 30A for 100 ohm load  
Volt per Amp Ratio at 3A for 100 ohm load  
DC Resistance at 20°C  
0.098 V/A  
48 ohms  
Dielectric Withstanding Voltage (Hi-pot)  
4KVrms  
Mechanical Specifications  
Polycarbonate  
Environmental Specifications  
Case  
Storage Temperature  
-55° to +130°C  
Encapsulant  
Flammibility  
Terminals  
Epoxy  
Insulation Resistance  
100 megohms min.  
Conforms to UL94-VO  
Pins Ø 1.0mm  
%RE vs RL at Rated primary current  
(AC1030)  
TALEMA  
10000  
1000  
100  
Date Code (W/Y)  
AC1030, Dot at start pin  
Marking  
Approximate Weight  
Tolerance  
35.5 grams  
±0.2mm  
Output Volts vs Input Current  
For various ohmic loads  
100  
10  
1
Infinity  
10  
0
10K  
5K  
100  
200  
300  
400  
500  
600  
700  
Percent ratio error in %  
2K  
Typical Excitation Curve  
(AC1025~AC1030)  
1K  
100  
10  
1
500  
200  
100  
50  
0.1  
1
10  
100  
Input Current in Amps  
Dimensions  
14.30  
30.20  
0.1  
0.01  
0.1  
1
10  
100  
Sec RMS Exciting Current in mA  
Notes:  
1) Unless requested, the terminating resistor and the one-turn  
primary are not supplied  
TALEMA INDIA  
W/Y  
AC1030  
2) Pin 3: Normally for mechanical support only but will be  
used on center tapped designs  
5±1mm  
Ø11.40  
2
3
1
Ø 1.016  
1
20.32  
2.08  
I - Turn  
Primary  
RL  
1/8W  
100 ohms  
30A  
3
2
3.0V  
10.16  
30mA  
Germany: Int.+4989-841 00-0 Ireland: Int.+35 375-48 666 Czech Rep: Int.+420 19-744 9303 India: Int.+91 427-341 950  
http://www.talema-nuvotem.com  
CTs\ACCatalog 05-00  
9
AC1040 40 Amp Current Transformer  
Low Cost 50/60Hz Current Transformers  
Applications  
Sensing Overload Current  
Ground fault detection  
Metering  
Analog to Digital Circuits  
Electrical Specifications @ 20°C ambient  
Electrical Specifications  
Primary Current  
Turns Ratio  
40A nom., 125A max.  
1000:1 nominal  
0.100 V/A  
Volt per Amp Ratio at 40A for 100 ohm load  
Volt per Amp Ratio at 4A for 100 ohm load  
DC Resistance at 20°C  
0.098 V/A  
49.3 ohms  
Dielectric Withstanding Voltage (Hi-pot)  
4KVrms  
Mechanical Specifications  
Polycarbonate  
Environmental Specifications  
Case  
Storage Temperature  
Insulation Resistance  
-55° to +130°C  
Encapsulant  
Flammibility  
Terminals  
Epoxy  
100 megohms min.  
Conforms to UL94-VO  
Pins Ø 1.0mm  
%RE vs RL at Rated primary current  
(AC1040)  
TALEMA  
10000  
1000  
100  
Date Code (W/Y)  
AC1040, Dot at start pin  
Marking  
Approximate Weight  
Tolerance  
47.3 grams  
±0.2mm  
Output Volts vs Input Current  
For various ohmic loads  
100  
10  
1
10  
Infinity  
2K  
0
200  
400  
Percent ratio error in %  
600  
800  
10K  
5K  
1K  
Typical Excitation Curve  
(AC1040~AC1050)  
500  
100  
10  
1
200  
100  
50  
0.1  
10  
100  
Input Current in Amps  
Dimensions  
14.30  
34.90  
0.1  
0.01  
0.1  
1
10  
Sec RMS Exciting Current in mA  
Notes:  
1) Unless requested, the terminating resistor and the one-turn  
primary are not supplied  
TALEMA INDIA  
W/Y  
AC1040  
2) Pin 3: Normally for mechanical support only but will be  
used on center tapped designs  
5±1mm  
Ø14.60  
2
3
1
Ø 1.016  
1
25.40  
2.08  
I - Turn  
Primary  
RL  
1/4W  
100 ohms  
40A  
3
2
4.0V  
10.16  
40mA  
THE TALEMA GROUP  
World Wide Toroidal Specialists  
10  
AC1050 50 Amp Current Transformer  
Low Cost 50/60Hz Current Transformers  
Applications  
Sensing Overload Current  
Ground fault detection  
Metering  
Analog to Digital Circuits  
Electrical Specifications @ 20°C ambient  
Electrical Specifications  
Primary Current  
50A nom., 125A max.  
Turns Ratio  
1000:1 nominal  
0.100 V/A  
0.098 V/A  
49.3 ohms  
4KVrms  
Volt per Amp Ratio at 50A for 100 ohm load  
Volt per Amp Ratio at 5A for 100 ohm load  
DC Resistance at 20°C  
Dielectric Withstanding Voltage (Hi-pot)  
Mechanical Specifications  
Environmental Specifications  
Case  
Polycarbonate  
Epoxy  
Storage Temperature  
Insulation Resistance  
-55° to +130°C  
Encapsulant  
Flammibility  
Terminals  
100 megohms min.  
Conforms to UL94-VO  
%RE vs RL at Rated primary current  
(AC1050)  
Pins Ø 1.0mm  
TALEMA  
10000  
1000  
100  
Date Code (W/Y)  
AC1050, Dot at start pin  
Marking  
Approximate Weight  
Tolerance  
47.3 grams  
±0.2mm  
Output Volts vs Input Current  
For various ohmic loads  
100  
10  
1
10  
Infinity  
2K  
10K  
0
200  
400  
600  
800  
1000  
5K  
Percent ratio error in %  
1K  
Typical Excitation Curve  
(AC1040~AC1050)  
500  
100  
10  
1
200  
100  
50  
0.1  
10  
100  
Input Current in Amps  
Dimensions  
14.30  
34.90  
0.1  
0.01  
0.1  
1
10  
Sec RMS Exciting Current in mA  
Notes:  
1) Unless requested, the terminating resistor and the one-turn  
primary are not supplied  
TALEMA INDIA  
W/Y  
AC1050  
2) Pin 3: Normally for mechanical support only but will be  
used on center tapped designs  
5±1mm  
Ø14.60  
2
3
1
Ø 1.016  
1
25.40  
2.08  
I - Turn  
Primary  
RL  
1/4W  
100 ohms  
50A  
3
2
5.0V  
10.16  
50mA  
Germany: Int.+4989-841 00-0 Ireland: Int.+35 375-48 666 Czech Rep: Int.+420 19-744 9303 India: Int.+91 427-341 950  
http://www.talema-nuvotem.com  
CTs\ACCatalog 05-00  
11  
AC1060 60 Amp Current Transformer  
Low Cost 50/60Hz Current Transformers  
Applications  
Sensing Overload Current  
Ground fault detection  
Metering  
Analog to Digital Circuits  
Electrical Specifications @ 20°C ambient  
Electrical Specifications  
Primary Current  
Turns Ratio  
60A nom., 200A max.  
1000:1 nominal  
0.100 V/A  
Volt per Amp Ratio at 60A for 100 ohm load  
Volt per Amp Ratio at 6A for 100 ohm load  
DC Resistance at 20°C  
0.0984 V/A  
24 ohms  
Dielectric Withstanding Voltage (Hi-pot)  
4KVrms  
Mechanical Specifications  
Polycarbonate  
Environmental Specifications  
Case  
Storage Temperature  
Insulation Resistance  
-55° to +130°C  
Encapsulant  
Flammibility  
Terminals  
Epoxy  
100 megohms min.  
Conforms to UL94-VO  
Pins Ø 1.0mm  
%RE vs RL at Rated primary current  
(AC1060)  
10000  
1000  
100  
TALEMA  
Date Code (W/Y)  
AC1060, Dot at start pin  
Marking  
Approximate Weight  
Tolerance  
65.2 grams  
±0.2mm  
Output Volts vs Input Current  
For various ohmic loads  
100  
10  
1
10  
Infinity  
2K  
-200  
0
200  
400  
600  
800  
1000  
1200  
10K  
Percent ratio error in %  
5K  
1K  
Typical Excitation Curve  
(AC1060~AC1075)  
500  
100  
10  
1
200  
100  
50  
0.1  
10  
100  
Input Current in Amps  
Dimensions  
15.90  
38.10  
0.1  
0.01  
0.1  
1
10  
Sec RMS Exciting Current in mA  
Notes:  
1) Unless requested, the terminating resistor and the one-turn  
primary are not supplied  
2) Pin 3: Normally for mechanical support only but will be  
used on center tapped designs  
TALEMA INDIA  
W/Y  
AC1060  
5±1mm  
Ø14.60  
2
3
1
Ø 1.016  
1
33.00  
2.85  
I - Turn  
Primary  
RL  
1/2W  
100 ohms  
60A  
3
2
6.0V  
60mA  
10.16  
THE TALEMA GROUP  
World Wide Toroidal Specialists  
12  
AC1075 75 Amp Current Transformer  
Low Cost 50/60Hz Current Transformers  
Applications  
Sensing Overload Current  
Ground fault detection  
Metering  
Analog to Digital Circuits  
Electrical Specifications @ 20°C ambient  
Electrical Specifications  
Primary Current  
75A nom., 200A max.  
Turns Ratio  
1000:1 nominal  
0.100 V/A  
0.0984 V/A  
24 ohms  
Volt per Amp Ratio at 75A for 100 ohm load  
Volt per Amp Ratio at 7.5A for 100 ohm load  
DC Resistance at 20°C  
Dielectric Withstanding Voltage (Hi-pot)  
Mechanical Specifications  
4KVrms  
Environmental Specifications  
Case  
Polycarbonate  
Epoxy  
Storage Temperature  
-55° to +130°C  
Encapsulant  
Flammibility  
Terminals  
Insulation Resistance  
100 megohms min.  
Conforms to UL94-VO  
%RE vs RL at Rated primary current  
(AC1075)  
Pins Ø 1.0mm  
10000  
TALEMA  
Date Code (W/Y)  
AC1075, Dot at start pin  
Marking  
Approximate Weight  
Tolerance  
65.2 grams  
±0.2mm  
1000  
100  
Output Volts vs Input Current  
For various ohmic loads  
100  
Infinity  
10K  
10  
-200  
0
200  
400  
600  
800  
1000  
1200  
1400  
5K  
2K  
Percent ratio error in %  
1K  
Typical Excitation Curve  
(AC1060~AC1075)  
500  
200  
100  
10  
1
10  
100  
50  
1
10  
100  
1000  
Input Current in Amps  
Dimensions  
15.90  
38.10  
0.1  
0.01  
0.1  
1
10  
Sec RMS Exciting Current in mA  
Notes:  
1) Unless requested, the terminating resistor and the one-turn  
primary are not supplied  
2) Pin 3: Normally for mechanical support only but will be  
used on center tapped designs  
TALEMA INDIA  
W/Y  
AC1075  
5±1mm  
Ø14.60  
2
3
1
Ø 1.016  
1
33.00  
2.85  
I - Turn  
Primary  
RL  
1W  
100 ohms  
75A  
3
2
7.5V  
10.16  
75mA  
Germany: Int.+4989-841 00-0 Ireland: Int.+35 375-48 666 Czech Rep: Int.+420 19-744 9303 India: Int.+91 427-341 950  
http://www.talema-nuvotem.com  
CTs\ACCatalog 05-00  
13  
AC1100 100 Amp Current Transformer  
Low Cost 50/60Hz Current Transformers  
Applications  
Sensing Overload Current  
Ground fault detection  
Metering  
Analog to Digital Circuits  
Electrical Specifications @ 20°C ambient  
Electrical Specifications  
Primary Current  
Turns Ratio  
100A nom., 250A max.  
1000:1 nominal  
0.100 V/A  
Volt per Amp Ratio at 100A for 100 ohm load  
Volt per Amp Ratio at 10A for 100 ohm load  
DC Resistance at 20°C  
0.0986 V/A  
21.3 ohms  
Dielectric Withstanding Voltage (Hi-pot)  
4KVrms  
Mechanical Specifications  
Polycarbonate  
Environmental Specifications  
Case  
Storage Temperature  
Insulation Resistance  
-55° to +130°C  
Encapsulant  
Flammibility  
Terminals  
Epoxy  
100 megohms min.  
Conforms to UL94-VO  
Pins Ø 1.0mm  
%RE vs RL at Rated primary current  
(AC1100)  
TALEMA  
Date Code (W/Y)  
AC1100, Dot at start pin  
Marking  
10000  
1000  
100  
Approximate Weight  
80 grams  
Output Volts vs Input Current  
For various ohmic loads  
100  
10  
1
Infinity  
10K  
5K  
2K  
1K  
10  
500  
0
200  
400  
600  
800  
1000  
1200  
1400  
1600  
Percent ratio error in %  
200  
Typical Excitation Curve  
(AC1100)  
100  
10  
1
100  
50  
10  
100  
1000  
Input Current in Amps  
Dimensions  
14.30  
44.50  
0.1  
0.01  
0.1  
1
10  
100  
Sec RMS Exciting Current in mA  
TALEMA INDIA  
W/Y  
AC1100  
Notes:  
1) Unless requested, the terminating resistor and the one-turn  
primary are not supplied  
5±1mm  
Ø19.05  
2) Pin 3: Normally for mechanical support only but will be  
used on center tapped designs  
2
3
1
Ø 1.016  
35.56  
1
2.07  
I - Turn  
Primary  
RL  
1W  
100 ohms  
100A  
3
2
10V  
10.16  
100mA  
THE TALEMA GROUP  
World Wide Toroidal Specialists  
14  
AC1150 150 Amp Current Transformer  
Low Cost 50/60Hz Current Transformers  
Applications  
Sensing Overload Current  
Ground fault detection  
Metering  
Analog to Digital Circuits  
Electrical Specifications @ 20°C ambient  
Electrical Specifications  
Primary Current  
150A nom., 500A max.  
Turns Ratio  
1000:1 nominal  
0.100 V/A  
0.0990 V/A  
11 ohms  
Volt per Amp Ratio at 150A for 100 ohm load  
Volt per Amp Ratio at 15A for 100 ohm load  
DC Resistance at 20°C  
Dielectric Withstanding Voltage (Hi-pot)  
Mechanical Specifications  
4KVrms  
Environmental Specifications  
Case  
Polycarbonate  
Epoxy  
Storage Temperature  
-55° to +130°C  
Encapsulant  
Flammibility  
Terminals  
Insulation Resistance  
100 megohms min.  
Conforms to UL94-VO  
%RE vs RL at Rated primary current  
(AC1150)  
Pins Ø 1.0mm  
TALEMA  
10000  
1000  
100  
Date Code (W/Y)  
AC1150, Dot at start pin  
Marking  
Approximate Weight  
Tolerance  
150 grams  
±0.2mm  
Output Volts vs Input Current  
For various ohmic loads  
1000  
100  
10  
10  
0
500  
1000  
1500  
2000  
Infinit  
10K  
5K  
Percent ratio error in %  
2K  
1K  
Typical Excitation Curve  
(AC1150~AC1200)  
500  
200  
100  
50  
100  
10  
1
1
10  
100  
1000  
Input Current in Amps  
Dimensions  
20.60  
55.60  
0.1  
0.01  
0.1  
1
10  
100  
Sec RMS Exciting Current in mA  
Notes:  
TALEMA INDIA  
W/Y  
1) Unless requested, the terminating resistor and the one-turn  
primary are not supplied  
2) Pin 3: Normally for mechanical support only but will be  
used on center tapped designs  
AC1150  
5±1mm  
Ø23.80  
2
3
1
Ø 1.016  
45.72  
3.95  
1
I - Turn  
Primary  
RL  
5W  
100 ohms  
150A  
3
2
15V  
12.70  
150mA  
Germany: Int.+4989-841 00-0 Ireland: Int.+35 375-48 666 Czech Rep: Int.+420 19-744 9303 India: Int.+91 427-341 950  
http://www.talema-nuvotem.com  
CTs\ACCatalog 05-00  
15  
AC1200 200 Amp Current Transformer  
Low Cost 50/60Hz Current Transformers  
Applications  
Sensing Overload Current  
Ground fault detection  
Metering  
Analog to Digital Circuits  
Electrical Specifications @ 20°C ambient  
Electrical Specifications  
200A nom., 500A max.  
Primary Current  
Turns Ratio  
1000:1 nominal  
0.100 V/A  
0.0991 V/A  
11 ohms  
loVaodlt per Amp Ratio at 200A for 100 ohm  
Volt per Amp Ratio at 20A for 100 ohm load  
DC Resistance at 20°C  
Dielectric Withstanding Voltage (Hi-pot)  
Mechanical Specifications  
4KVrms  
Environmental Specifications  
Case  
Polycarbonate  
Epoxy  
Storage Temperature  
-55° to +130°C  
Encapsulant  
Flammibility  
Terminals  
Insulation Resistance  
100 megohms min.  
Conforms to UL94-VO  
Pins Ø 1.0mm  
%RE vs RL at Rated primary current  
(AC1200)  
TALEMA  
10000  
1000  
100  
Date Code (W/Y)  
AC1200, Dot at start pin  
Marking  
Approximate Weight  
Tolerance  
150 grams  
±0.2mm  
Output Volts vs Input Current  
For various ohmic loads  
1000  
100  
10  
10  
0
500  
1000  
1500  
2000  
2500  
Infinit  
10K  
5K  
Percent ratio error in %  
2K  
1K  
Typical Excitation Curve  
(AC1150~AC1200)  
500  
200  
100  
50  
100  
10  
1
1
10  
100  
1000  
Input Current in Amps  
Dimensions  
20.60  
55.60  
0.1  
0.01  
0.1  
1
10  
100  
Sec RMS Exciting Current in mA  
Notes:  
1) Unless requested, the terminating resistor and the one-turn  
primary are not supplied  
TALEMA INDIA  
W/Y  
AC1200  
2) Pin 3: Normally for mechanical support only but will be  
used on center tapped designs  
5±1mm  
Ø23.80  
2
3
1
Ø 1.016  
1
45.72  
3.95  
I - Turn  
Primary  
RL  
5W  
100 ohms  
200A  
3
2
20V  
12.70  
200mA  
THE TALEMA GROUP  
World Wide Toroidal Specialists  
16  
Authorised Talema Sales Representatives  
Germany  
PLZ 2 & 3 (less 35 & 36)  
HEINRICH J. MERCK  
Australia  
TORTECH PTY. LTD.  
POB 194  
Italy  
TECHNOLASA ELETTRONICA  
ViaMacello,65/B  
NorthStrathfield,  
Sydney, N.S.W. 2137  
Tel: 02 - 9642 6003  
Fax: 02 - 9642 6127  
IndustrievertretungenfürElektrotechnikGmbH  
Hasenhöhe128  
22587Hamburg  
I-39100 Bolzano  
Tel: 0471 - 305 400  
Fax: 0471 - 305 44  
E-Mail:sales@technolasa.com  
Tel: (040) 87 08 63-0  
E-Mail: tortech@ozemail.com.au  
WebSite: www.tortech.com.au  
Fax: (040) 87 08 63-33  
E-mail: heinrich.merck@hj-merck.de  
Netherlands  
DELTRON-RADIKOR BV  
Postbus50006  
DeSteiger131  
1351AMAlmereHaven  
Tel: 036 - 531 2554  
Fax: 036 - 531 2465  
E-Mail:sales@deltron-radikor.nl  
WebSite:www.deltron-radikor.nl  
PLZ 4 & 5  
Austria  
HÖLLINGER INDUSTRIE VERTRIEB  
Nachtigallenweg4  
MARTIN RINGBECK  
IVTTechnischeIndustrievertretung  
Saturnstraße18  
A-4063Horsching  
42699Solingen  
Tel: 07221 - 74622-0  
Fax:07221-74622-21  
E-mail: gerhard.hoellinger@aon.at  
Tel: (0212) 232 4421/22  
Fax:(0212)2324432  
E-mail: tsg-ivt-solingen@t-online.de  
Sweden  
NORDTEK SVERIGE AB  
Kostervägen3  
PLZ 7  
BERND BIELER  
Belgium  
ISATRONICK B.V.B.A.  
Doolhoflaan17  
Industrievertretung  
Max-Eyth-Straße1  
72379Hechingen  
Tel: (07471) 1804-0  
Fax:(07471)1804-10  
E-mail: bieler-technica@t-online.de  
S-18135Lidingö  
B-2640Mortsel  
Tel: 08 - 544 822 44  
Fax: 08 - 544 822 45  
E-mail:info@nordtek.se  
WebSite:www.nordtek.se  
Tel: 03 - 448 1976  
Fax: 03 - 448 1195  
E-Mail: info@isatronick.be  
WebSite:www.isatronick.be  
Denmark  
NORDTEK DANMARK  
Horsensvej134  
Switzerland  
BTB COMPONENTS AG  
Dorfstraße19A  
Ireland  
JOHN NELSON  
9 Washington Park  
Rathfarnham  
DK-8300Odder  
CH-8902Urdorf  
Tel: 086 - 554 344  
Fax: 086 - 554 644  
E-Mail: post@nordtek.dk  
WebSite:www.nordtek.dk  
Tel: 01 - 734 4888  
Fax: 01 - 734 4892  
E-mail: info@btbcomponents.ch  
WebSite:www.btbcomponents.ch  
Dublin14  
Tel: 01 - 493 9208  
Fax: 01 - 494 5595  
E-Mail:sales@nuvotem.com  
WebSite:www.nuvotem.com  
Israel  
France  
UK  
MIGVAN TECHNOLOGIES &  
ENGINEERING LTD.  
P. O. Box 7022  
E.S.I.A  
DELTA COMPONENTS LTD.  
TheCourtyard  
Courtaboeuf7-Avenuedes2lacs  
Villejust  
91971CourtaboeufCedex  
Tel: 01 6931 4410  
Fax: 01 6931 4425  
E-Mail: esia@wanadoo.fr  
SevenAcres,SmallfieldRoad  
Home, Surrey RH6 9JP  
Tel: 01342 - 844 555  
Fax: 01342 - 844 552  
E-Mail: sales@deltacomponents.com  
WebSite:www.deltacomponents.com  
13HashiloachStreet  
Petach-Tikva  
Tel: 03 - 924 0784  
Fax: 03 - 924 0787  
E-mail: ori@mte.co.il  
Design and Manufacturing Facilities  
http://www.talema-nuvotem.com  
Ireland  
Czech Republic  
TALEMA ELECTRONIC s.r.o.  
Jablonského 7  
Germany  
India  
TALEMA ELEKTRONIK GMBH  
Riesstr. 8, Postfach 2523  
82110 Germering  
NUVOTEM TEO.  
TALEMA ELECTRONIC PVT. LTD.  
No. 30, 31 Electronic Industrial Estate  
Suramangalam  
Crolly  
Co. Donegal  
301 45 Plzeñ  
Tel: Int. + 420 19 - 744 9303  
Fax: Int. + 420 19 - 744 3697  
Email: info@talema.cz  
Tel: Int. + 49 89 - 841 00 - 0  
Fax: Int. + 49 89 - 841 00 25  
Email: info@talema.isar.de  
Tel: Int. + 353 75 - 48 666  
Fax: Int. + 353 75 - 48 139  
Email: info@nuvotem.com  
Salem - 636 005, Tamil Nadu  
Tel: Int. + 91 427 - 341 950  
Fax: Int. + 91 427 - 340 512  
E-mail: talema@md3.vsnl.net.in  
Germany: Int.+4989-841 00-0 Ireland: Int.+35 375-48 666 Czech Rep: Int.+420 19-744 9303 India: Int.+91 427-341 950  
http://www.talema-nuvotem.com  
CTs\ACCatalog 05-02  
Summary  
TOTAL PROGRAM  
SECTION 1  
Toroidal Transformers for Universal  
Application  
SECTION 2  
Toroidal Printed Circuit Transformers  
SECTION 3  
Eleven Good Reasons To Select  
TALEMA Toroidal Transformers  
SECTION 4  
Current sense inductors and  
transformers  
Common mode toroidal chokes  
High capacity linear storage chokes  
Toroidal filter and storage chokes  
Differential mode toroids  
Power inductors  
High stability storage chokes  
Miniature, high current, surface mount  
inductors  
Low power, high stability inductors  
SECTION 5  
Inductive components for ISDN and  
data communications  
Interface signal transformers and  
modules - toroidal and linear  
Isolation and coupling transformers  
Pulse transformers  
SECTION 6  
SMD and DIL Common mode  
interface chokes for EMI Noise  
Suppression  
Data and Signal Line Filters  
SECTION 7  
50/60Hz Current Transformers for  
sensing current overload. Primary  
current ratings from 1 to 200 Amps.  
Current Sense Inductors and  
Transformers for frequency ranges  
from 20kHz to 200kHz. Primary  
current  
ratings to 80 Amps  
THE TALEMA GROUP  
Worldwide Toroidal Specialists  

相关型号:

AC-1040

(1.07 M)
ETC

AC-1050

(1.07 M)
ETC

AC-1302A

CCFL INVERTER(For Single Tube Applications)
ACIPOWER

AC-1386C

CCFL INVERTER
ACIPOWER

AC-1386D

CCFL INVERTER
ACIPOWER

AC-1399A

CCFL INVERTER
ACIPOWER

AC-1402

ALUMINUM CHASSIS
ETC

AC-1404

ALUMINUM CHASSIS
ETC

AC-1405

ALUMINUM CHASSIS
ETC

AC-1407

ALUMINUM CHASSIS
ETC

AC-1413

ALUMINUM CHASSIS
ETC

AC-1414

ALUMINUM CHASSIS
ETC