AD-SOIC20-A_技术文档

State-of-the-art

Device Programmer

USER

GUIDE

(Revision 1.04)

Micro-Pro User Guide V1.04

Copyright Information

Information in this document is subject to

change without notice and does not

represent a commitment on the part of the

manufacturer. The software described in this

document is furnished under license

The purchaser may make one copy of the

software for backup purposes. No part of

this manual may be reproduced or

transmitted in any form or by any means,

electronic, mechanical, including

agreement or nondisclosure agreement and

may be used or copied only in accordance

with the terms of the agreement.

photocopying, recording, or information

retrieval systems, for any purpose other

than for the purchaser’s personal use,

without written permission.

It is against the law to copy the software on

any medium except as specifically allowed

in the license or nondisclosure agreement.

Atmel^TMand AVR^TMare trademarks of the Atmel Corporation

Keil C51^TMand dScope^TMare trademarks of Keil Elektronik GmbH

Microsoft, MS-DOS, Windows^TMand Windows 95^TMare registered trademarks of

the Microsoft Corporation

IBM, PC and PS/2 are registered trademarks of International Business Machines Corporation

Intel, MCS 51, ASM-51 and PL/M-51 are registered trademarks of the Intel Corporation

Every effort was made to ensure accuracy in this manual and to give appropriate credit to

persons, companies and trademarks referenced herein.

i

Micro-Pro User Guide V1.04

Contacts

Equinox Technologies UK Limited

3 Atlas House, St Georges Square, Bolton, England BL1 2HB

Telephone Sales ....................... : +44 (0) 1204 529000

Fax .............................................. : +44 (0) 1204 535555

E-mail ......................................... : sales@equinox-tech.com

Web site .................................... : www.equinox-tech.com

For technical support on this product please e-mail us at:

micropro@equinox-tech.com

Software Updates

In line with our policy of continuous improvement, the ‘Meridian for Windows™’ software is

updated on a regular basis. If you would like to receive an automatic e-mail every time a

new version is released, please make sure you have registered your system with Equinox and

you have quoted your e-mail address. You may cancel this service at any time.

The Meridian software updates can currently be downloaded from the following

places:

Internet

ftp site

: www.equinox-tech.com

: ftp.equinox-tech.com

Atmel BBS : +1 408 436-4309

ii

Micro-Pro User Guide V1.04

Contents

INTRODUCTION......1

SYSTEM SPECIFICATIONS......2

INSTALLATION OVERVIEW......3

HARDWARE INSTALLATION INSTRUCTIONS......4

SOFTWARE INSTALLATION......5

PARALLEL PORT SELECTION......6

HARDWARE OVERVIEW......7

SOFTWARE OVERVIEW......8

DEVICE SELECTION......10

DEVICE POSITION & ORIENTATION......11

DEVICE SUPPORT......12

8051 SUPPORT PRODUCTS GUIDE......14

AVR SUPPORT PRODUCTS GUIDE......15

MISCELLANEOUS ACCESSORIES......16

iv

Micro-Pro User Guide V1.04

Introduction

he Micro-Pro is a state-of-the-art

device programmer supporting a

wide range of programmable devices.

The programmer was originally

developed to program the Atmel AT89C

and AT89S microcontroller families, but

support has now been widened to

include many other 8051 derivatives

and also a selection of popular Atmel

FLASH and EEPROM memories.

MICRO-PRO DEVICE PROGRAMMER

HIGHLIGHTS

T

• State-of-the-art Device Programmer

• Supports the entire Atmel 89C & 89S

microcontroller families as standard

• Supports many generic 8051 devices

(87C51-FA/FB/FC)

• Supports many Atmel AVR

microcontroller derivatives

The Micro-Pro programmer features

extremely fast programming speeds due to

its optimised field-programmable hardware.

Further speed enhancements have been

made possible by virtue of the parallel data

connection to the PC. The powerful

front-end software caters for both involved

development cycle programming needs and

production batch programming

• Also supports many Atmel FLASH,

EEPROM and Configurator devices

• Field Programmable hardware ensures

future device support

• FAST programming times due to

optimised hardware/software

algorithm for each device

• Device Manufacturer Certification for

many algorithms

requirements.

• Supports most DIL devices up to 40

pins without an adaptor

• Adaptors available for many other

package types

• Connects to spare PC parallel port

• Straightforward hardware/software

installation

• Supports programming of security

lock bits security tables and special

option bits

1

Micro-Pro User Guide V1.04

System Specifications

MINIMUM SYSTEM CONTENTS

MINIMUM PC REQUIREMENTS

Micro-Pro Device Programmer

Power Supply (PSU)

Parallel Cable (25w M/M pin to pin)

The minimum hardware and software

requirements to ensure that the

programmer operates correctly are as

follows:

MICRO-PRO PARALLEL

PROGRAMMER SPECIFICATIONS

100% IBM compatible 386+

Windows 3.1 or higher

Minimum 4MB RAM

Minimum 1MB free hard disk space

Spare PC parallel port

Programmer Size : 10.5 x 8 x 2 cm

Shipped Weight : approx 1.5kg

PSU

: 15V DC @250mA

Port connection : Parallel 25-way D

ZIF socket

: Quality 40way socket

Accepts both 0.3/0.6”

pitch devices

2

Micro-Pro User Guide V1.04

Installation Overview

The Hardware/Software Overview for the installation process of the Micro-Pro programmer is

detailed diagrammatically below. Please refer to the following pages for a more detailed

explanation.

Perform Hardware Installation

Perform Software Installation

Select the correct parallel port

Try

Installation

Trouble Shooting

Guide

selecting another

LPT port

<TEST>

PORT

FAIL

PASS

Programmer should now be

“ON LINE”

3

Micro-Pro User Guide V1.04

Hardware Installation Instructions

OVERVIEW

The Micro-Pro programmer connects to any spare PC parallel (LPT) port. If you only have

one parallel port and this is in use for eg. a printer, it may be possible to add a second

parallel port to your machine by inserting a new I/O card. If you are limited to one parallel

port eg. on a laptop, then it is necessary to remove any other devices connected to that

parallel port for the duration of using the Micro-Pro.

For further hardware installation help, please refer to the Installation Troubleshooting

Guide.

Connect the programmer to the PC as follows:

1 Plug male end of PC parallel cable into spare PC parallel port

2 Plug female end of PC parallel cable into 25-way connector on the programmer

3 Plug power jack into programmer

4 Plug mains adaptor into suitable mains supply

The programmer RED ‘POWER’ LED should now be illuminated

4

PSU

Input

3

1

2

4

Micro-Pro User Guide V1.04

Software Installation

The Micro-Pro programmer is supplied with

'Micro-Pro for Windows' PC driver software.

This software is supplied on one 3.5" floppy

disk.

For more detailed information on which

libraries to install, please refer to the ‘Device

Support’ section.

On completion, the installation program will

install the 'Micro-Pro' icon within a new

program group called 'Micro-Pro'.

TO INSTALL 'MICRO-PRO FOR

WINDOWS' SOFTWARE:

To launch the software, simply

double-click on the

'Micro-Pro' icon.

• Boot the PC into Windows environment

(Win 3.1 or Win 95 )

• Insert 'Micro-Pro for Windows' disk into

floppy disk drive (A: / B:)

• Select the 'Run...' command from the

'File' menu in the Program Manager

• Select 'Browse' and navigate to the floppy

drive (A: / B:)

• Select 'micropro.exe'

• Select the 'OK' button

The software installation program should

now display an introductory screen. Please

follow the on-screen prompts in order to

complete the software installation process.

5

Micro-Pro User Guide V1.04

Parallel Port Selection (Select Port)

The Micro-Pro programmer plugs into a

If you have more than one parallel port on

your PC, but only one LPT address is

displayed, it is likely that your hardware

setup requires adjusting in the PC bios.

spare parallel port of any IBM compatible

PC including the majority of laptop

machines.

The programmer should operate correctly in

the following parallel port (LPT) modes:

ii. Select the LPT port to which the

programmer is connected

i. Uni-directional mode

iii. Select <Test>

A programmer communications test is now

performed.

ii. Bi-directional (Enhanced or EPP) mode

However, if the programmer fails to be

detected it is worth switching the LPT mode

between uni and bi-directional using the PC

bios and then re-trying the communication

test.

This tests both the programmer, cable and

PC parallel port.

COMMUNICATIONS TEST PASS

The programmer has been detected OK by

the Micro-Pro software. If you now

<Cancel> out of the <Test Port> dialogue

box, the words ‘ON LINE’ should now be

displayed at the bottom right of the Micro-

Pro Window.

TO SELECT THE CORRECT PARALLEL

PORT (LPT):

i. From the menu bar select <Options>

The available LPT ports on your computer

together with the corresponding address are

now displayed. eg. LPT1 ($378)

Installation is complete and the programmer

should now be ready to-use.

COMMUNICATIONS TEST FAIL

The programmer was not detected on the

LPT port selected. Please check that the

correct LPT port was selected, and if not,

repeat the <Select Port> < Test> operation.

If the programmer is still not detected,

please refer to the Installation

Troubleshooting Guide located in the help

file on disk.

6

Micro-Pro User Guide V1.04

Hardware Overview

1

4

5

6

2

7

3

Key

1 PSU input

2 Parallel cable connection (to PC)

3 ZIF (Zero Insertion Force) socket (40 way)

4 Auxiliary power connector

5 Power LED (Red)

6 Active LED (Yellow)

7 Atmel AT6002 FPGA

7

Micro-Pro User Guide V1.04

Software Overview

The Micro-Pro for Windows software features many powerful functions which can be

activated by simply clicking a single icon. Other utilities and commands are available by

selecting the relevant menu option.

For further information about the Micro-Pro for Windows software , please refer to the 'On-

line Help System' supplied with the software.

The most commonly used functions for which an icon exits are listed below.

LOAD FILE TO BUFFER (F9 or Ctrl + L)

Allows you to select a file or multiple files and load the file(s) into

the programmer buffer area(s). Currently supports Intel Hex and

Binary file formats as standard.

SAVE TO DISK (Ctrl + S)

Allows you to save the contents of the buffer(s) to a file.

Currently supports Intel Hex and Binary file formats as standard.

BLANK CHECK

Checks if the currently selected device is blank.

i.e. All locations = FFh

VERIFY DEVICE

Compares the contents of the buffer area(s) with the contents of

the currently selected device.

8

Micro-Pro User Guide V1.04

Software Overview continued

PROGRAM DEVICE

Programs device with contents of buffer

DEVICE READ

Reads the contents of the currently selected device into the

programmer buffer area(s).

ERASE DEVICE

Performs an ELECTRONIC erase on the currently selected device.

Please note: OTP and EPROM devices do not support an

ELECTRONIC erase cycle.

DEVICE AUTO-PROGRAM

Performs a complete programming cycle including Signature

Check, Erase, Blank check, Program, Special Options, Security etc

SPECIAL OPTIONS

Allows you to READ/WRITE the special option bits of certain

devices which support non-standard features.

SECURITY

Allows you to READ/WRITE the security lock bits of any device

which supports this feature.

9

Micro-Pro User Guide V1.04

Device Selection

It is necessary to select the particular device to be programmed as follows:

e.g. To select the Atmel AT89S8252 microcontroller as the current device

1 Select the DEVICE menu and choose SELECT

Select

Orientation

Information

Check Signature

Blank Check

2 You will now be presented with a list of device types

Choose MICROCONTROLLER

FPGA Configurator

Serial EEPROM

Microcontroller

FLASH Memory

EEPROM Memory

3 A list of device manufacturers is now displayed

Atmel

Atmel AVR

Intel

Select the one you require i.e. Atmel

Dallas

Philips/Signetics

4 A list of microcontroller devices produced by that

AT89C1051

AT89C2051

AT89S8252

AT89S553

manufacturer is now displayed.

Select the one you require i.e. AT89S8252

AT89LS8252

The currently selected device is now active

10

Micro-Pro User Guide V1.04

Device Position & Orientation

The Micro-Pro programmer accepts a wide variety of devices in dual-in-line (DIL) packages

without the need for additional package adaptors or convertors. The Zero Insertion Force

(ZIF) socket caters for DIL device with up to 40 pins and can also accept both 0.3” and 0.6”

pitch devices.

The diagram below shows the correct position and orientation of the target device in the ZIF

socket. The position of pin 1 of the target device is marked by a dot.

4

3

2

1

Device Position & Orientation Key

1 MICROCONTROLLER (40 pin - 0.6” pitch)

e.g. 89C51, 87C52

2 FLASH (32 pin - 0.6” pitch)

e.g. AT29C512, AT29C010

PARALLEL EEPROM (32 pin)

e.g. 28C512

3 MICROCONTROLLER (20 pin - 0.3” pitch)

e.g. AT89C2051, AT90S1200

4 SERIAL EEPROM (8 pin - 0.3” pitch)

e.g. AT24C08, AT25010

5 SERIAL CONFIGURATORS (8 pin - 0.3” pitch)

e.g. 17C256

11

Micro-Pro User Guide V1.04

Device Support

89C Microcontroller

AT89C51

AT89C52

AT89C55

AT89LV51

AT89LV52

AT89LV55

AT89C51-xxxx-5

AT89C52-xxxx-5

AT89C55-xxxx-5

AT89LV51-xxxx-5

AT89LV52-xxxx-5

AT89LV55-xxxx-5

AT87F51

ATMEL

89C Microcontroller

Type

Device

FPGA Configurator

AT17C65 DIP8

AT17C128 DIP8

AT17C256 DIP8

AT17C65 SOIC20/PLCC

AT17C128 SOIC20/PLCC

AT17C256 SOIC20/PLCC

Flash Memory

*AT29C256-DIL28 NEED

AT29C256-PLCC32

*AT29C257-PLCC32

AT29C512

AT29C010

AT29C010A

AT87F52

AT89C1051

AT89C1051U

AT89C2051

AT89C4051

AT29C020

AT29C040A

Flash Memory

AT49F010

AT49F020

AT49F040

89S Microcontroller

AT89S8252

AT89S53

AT89LS8252

AT89LS53

Serial EEPROM

AT24C01

AT24C01A

AT24C02

AT24C04

AT24C08

AT24C16

AT24C164

AT24C32

AT24C64

AT24C32 SOIC14

AT24C64 SOIC14

EEPROM Memory

AT28C010-DIL32

AT28C010E-DIL32

AT28C010-PLCC32

AT28C010E-PLCC32

AT28C16-PLCC32

AT28C16E-PLCC32

*AT28C17-PLCC32

AT28C17E-PLCC32

*AT28C64-PLCC32

*AT28C64E-PLCC32

*AT28C64X-PLCC32

*AT28C64B-PLCC32

*AT28HC64B-PLCC32

*AT28C256-PLCC32

*AT28HC256-PLCC32

*AT28C256E-PLCC32

AT28C040-44PLCC

Serial EEPROM

AT25010

AT25020

AT25040

Serial EEPROM

AT93C46

AT93C56

AT93C57

AT93C66

* Please note: The following 28-pin FLASH & EEPROM devices

can only be supported in PLCC-32 package. The DIL-28

package can not be supported.

AVR Microcontroller

AT90S1200

AT90S1200A

AT90S2313

AT90S8515-SPI^✝

AT90S4414-SPI^✝

✝

Only Serial (ISP) programming mode is supported

12

Micro-Pro User Guide V1.04

Device Support continued

DALLAS

PHILIPS/SIGNETICS

Type

Device

Type

Device

Microcontroller

DS87C520

Microcontroller

SC87C51

SC87C51 OTP

SC87C52 OTP

S87C51FA

S87C51FB

S87C51FC

87C52EBPN OTP

87C52EPFFA

S87C51CCN40 OTP

S87C51 FB-4F40 OTP

S87C51CCF40 OTP

INTEL

Type

Device

Microcontroller

80C251SB

87C251SB

Microcontroller

D87C51-2

D87C51

D87C51 OTP

D87C51BH OTP

D87C52

D87C52 OTP

D87C52BH

D87C51FA

D87C51FA OTP

MR87C51/B

D87C51FB

D87C51FB OTP

D87C54 OTP

D87C51B OTP

TEMIC

Type

Device

Microcontroller

87C251SB

13

Micro-Pro User Guide V1.04

8051 Support Products Guide

Order code

Description

Programming Systems

AT-89C-2K-ST

AT-89C-8K-DV

Atmel 89C Microcontroller Starter System (Includes PK51-2K)

Atmel 89C Microcontroller Family Development System (Includes Keil PK51-8K)

Micro-Pro Professional Device Programming System

MPW-PLUS

EQ-8051-ST1

Flash 8051 Professional Starter System

UISP-S3-SYS

Micro-ISP Serial Programming System for the Atmel 89S/90S Microcontroller Families

Integrated 89S Microcontroller Training System (2K code)

Integrated 89S Microcontroller Training System (8K code)

ISP Programming System for the Atmel 89S Microcontroller Family

ISP Development System for the Atmel 89S Microcontroller Family (Includes Keil PK51-8K)

AT-89S-ISP-TR-2K

AT-89S-ISP-TR-8K

AT-89S-ISP-SYS

AT-89S-ISP-DV-8K

Evaluation/ OEM Modules

AT-89C-X051-DEMO

AT-89C-X051-OEM

EVALU8R-1P

OEM-UC-20/40

Package Adaptors

AD-PLCC44-A

AD-DIL40-PLCC44-A

AD-TQFP44-A

Atmel 89C1051/2051 Credit Card Demo Module

Atmel 89C1051/2051 OEM Module

Universal Microcontroller Evaluation Module

Universal 8051/AVR Microcontroller OEM Module

Package Adaptor - PLCC-44 to DIL-40 (for programming/package conversion)

Package Adaptor - PLCC44 to DIL-40 (for emulation/package conversion)

Programming adaptor - 44-pin TQFP to 40-pin DIL

AD-SOIC20-A

SOIC-20 to DIL-20 Adaptor Module

AD-8051-ICPP

SS-89S8252-P

In-Circuit Re-Programming Adaptor for the Atmel 89C & 89S Microcontroller Families

Atmel 89S8252 ISP 8051 Socket-Stealer Module (DIL-40)

SS-89S8252-J

Atmel 89S8252 ISP 8051 Socket-Stealer Module (PLCC-44)

Keil Development Language Tools

PK51-2K

“Keil PK51 Lite - 2K C Compiler, Assembler & Software Simulator”

PK51-8K-UPG

PK51-8K-FULL

PK51-MANUALS

Literature

Software Upgrade from PK51 Lite (2K) to PK51-8K version

Software Upgrade from PK51-8K to Full version

“Keil Manual Set for PK51 (C51, A51 & Utilities)”

CD-AT98

Atmel CD-ROM Data Book

DB-8051-981

Miscellaneous

LCD/KPD-V1

Atmel 8051 Microcontroller Data Book

Intelligent LCD/Keypad OEM Module (RS-232 / 1K EEPROM)

Memory Emulation Products

ICEPROM512K-80

PLCC32 HEAD

DIP40 HEAD

icePROM EPROM/ Flash Emulation System

icePROM 32 pin PLCC Adaptor

icePROM 40 pin DIP Adaptor

14

Micro-Pro User Guide V1.04

AVR Support Products Guide

Order code

Description

PROGRAMMING SYSTEMS

AVR2-ST

Professional AVR Microcontroller Starter System

AVR1-8K-DV

AVR1-820K

MPW-PLUS

UISP-S3-SYS

UISP-UPG1

ACT-UPG1

UISP-EXP1

Professional AVR Microcontroller Development System

Atmel AT90S1200/AT90S23x3 AVR Microcontroller Starter Kit

Micro-Pro Professional Device Programming System

Micro-ISP Series III Professional Serial Programming System

Micro-ISP Upgrade: Atmel ATmega programming support

Activ8r Upgrade: Atmel ATmega programming support

Low Voltage (+3V) In-System Programming (ISP) Expansion Module

EVALUATION/OEM MODULES

OEM-UC-20/40

EVALU8R-1P

Universal 8051/AVR Microcontroller OEM Module

Evalu8r - Universal 8051/AVR Microcontroller Evaluation Module

PACKAGE ADAPTORS ETC.

AD-PLCC44-A

AD-DIL40-PLCC44-A

AD-SOIC20-A

AD-SOIC8-A

Programming adaptor - 44-pin PLCC to DIL-40

Emulation adaptor - 44-pin PLCC on target system to 40-pin DIL

Microcontroller Programming adaptor - 20-pin SOIC to 20-pin DIL

Microcontroller Programming adaptor - 8-pin SOIC to 8-pin DIL

Parallel programming adaptor - Atmel AT90S8535/AT90S4434 (40-pin DIL)

Programming adaptor - 44-pin TQFP to 40-pin DIL

AD-8535-A

AD-TQFP44-A

SS-90S8515-P

SS-90S8515-J

ISP Socket Stealer Module fitted with Atmel AT90S8515 microcontroller (DIL)

ISP Socket Stealer Module fitted with Atmel AT90S8515 microcontroller (PLCC)

AVR BASIC Programming Language

AVR-BAS-LITE

AVR-BAS-8K

AVR-BAS-FULL

AVR-BAS-8KF

AVR BASIC LITE Version (1K bytes - AT90S1200 support only)

AVR BASIC 8K Version (8K bytes - All AVR derivatives supported)

AVR BASIC Full Version (8K bytes - All AVR derivatives supported)

AVR BASIC 8K to FULL version upgrade

IAR AT90S Language Tools

EWA90BAS-EE

EWA90

“IAR Baseline Tool Set” - C compiler, assembler, debugger (8K code limit)

“IAR Full AT90S Version” - C compiler, assembler, debugger (unrestricted code)

DO-BOX (Dynamically Optimised BASIC Box) + Accessories

DOBOX-ST1

DO-BOX Starter System 1

DO-BOX Development System 1

DO-BOX Module 1

DO-BOX Prototyping Module

DO-BOX Applications Module 1

DOBOX-DV1

DOBOX-MOD1

DOBOX-PM1

DOBOX-AM1

LITERATURE

CD-AT98

Atmel CD-ROM Databook 1998

DB-AVR-981

Atmel AVR Microcontroller Data Book (Paper format)

AVR BASIC Reference Guide

AVR BASIC Getting Started Guide

MAN-AVRBAS-REF

MAN-AVRBAS-GS

MISCELLANEOUS

CAB-SER1

PC Serial Cable Adaptor Kit (9W-25W & 25W-9W)

PC Parallel Cable (25W to 25W M/M 2M)

CAB-PAR25MM

15

Micro-Pro User Guide V1.04

Miscellaneous Accessories

Adaptors

AD-PLCC44-A AD-SOIC20-A

Atmel AVR microcontrollers

AD-SOIC8-A

AD-TQFP44-A

AT90S1200

AT90S1200A

AT90S2323

AT90S2343

AT90S4414

AT90S8515

AT90S4434

AT90S8535

✖

✔

✖

✔

✖

✔

✖

Atmel 8051 microcontrollers

AT89C1051

AT89C1051U

AT89C2051

AT89C4051

AT89C51

✖

✔

✖

✔

AT89C52

AT89C55

AT89S8252

AT89S53

44-pin PLCC

adaptor

Cables

TOP

1

illustrated

CAB-PAR25MM

PC Parallel Cable (25W to 25W M/M 2M)

Pin 1

44-pin PLCC

device

Power Supplies

PSU-15250-UK, PSU-15250-US, PSU-15250-EU

Mains Power Supply Adaptor 15V@250mA

Suitable for use with : Micro-PRO Programmer

Activ8r Programmer

TOP

Pin 1

20-pin SOIC

adaptor

SOIC

Adaptor

illustrated

16

Equinox Technologies UK Limited reserves the right to change any information contained within

this manual without prior notice. E&OE

Terms and product names contained in this document may be trademarks of others.


型号：	AD-SOIC20-A
厂家：	ETC
描述：	ADAPTER ADAPTER\n
文件：	总21页 (文件大小：712K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

AD-SOIC20-A [ETC]

相关型号：

AD004-00

AD004T2-00

AD004T2-11

AD005-00

AD006-00

AD015DYAA1-J21

AD020-00

AD021-00

AD022-00

AD023

AD023-00

AD024-00