ADM6315-32D1ART-RL7 [ETC]
Voltage Detector ; 电压检测器\n型号: | ADM6315-32D1ART-RL7 |
厂家: | ETC |
描述: | Voltage Detector
|
文件: | 总8页 (文件大小:69K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Open-Drain Microprocessor
Supervisory Circuit in 4-Lead SOT-143
a
ADM6315
FEATURES
FUNCTIO NAL BLO CK D IAGRAM
Superior Upgrade for MAX6315
Specified Over Temperature
Low Power Consumption (5 A Typ)
Precision Voltage Monitor of Voltages from 2.5 V to
5 V at 100 mV Increments
V
GND
CC
V
REF
ADM6315
Reset Assertion Down to VCC > 1 V
Built-In Manual Reset
Pin Compatible with the ADM811
RESET
RESET
CIRCUITRY
APPLICATIONS
DEBOUNCE
MR
Microprocessor Systems
Controllers
Intelligent Instruments
Automotive Systems
Safety Systems
Portable Instruments
GENERAL D ESCRIP TIO N
T he ADM6315 is a reliable voltage monitoring device that is
suitable for use in most voltage monitoring applications.
V
CC
SYSTEM POWER
10k⍀
P
SYSTEM
ADM6315
T he ADM6315 is designed to monitor as little as a 1.8% degra-
dation of a power supply voltage. Voltages that can be moni-
tored by the ADM6315 are all voltages (at 100 mV increments)
from 2.5 V to 5 V.
MR
RESET
RESET
GND
GND
Included in this circuit is a debounced Manual Reset input.
Reset can be activated using an ordinary switch (pulling MR
low), by a low input from another digital device, or by a degra-
dation of the supply voltage. T he manual reset function is very
useful, especially if the circuit in which the ADM6315 is operat-
ing enters into a state that can only be detected by the user.
Allowing the user to manually reset a system can reduce the
damage or danger that could otherwise be caused by an out of
control or locked-up system.
Figure 1. Typical Operating Circuit
T he ADM6315 comes in a cost and space efficient SOT -143
package.
REV. A
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
© Analog Devices, Inc., 2001
(V = Full Operating Range, T = TMIN to T , V Typ = 5 V unless otherwise noted.)
ADM6315–SPECIFICATIONS
CC
A
MAX CC
P
aram eter
Min
Typ
Max
Unit
Test Conditions/Com m ents
SUPPLY
Operating Voltage
VCC Supply Current
1.0
5.5
12
12
V
µA
µA
TA = 0°C to 70°C
VCC = 5.5 V (No Load)
VCC = 3.6 V (No Load)
5
4
RESET VOLT AGE T HRESHOLD (VT H)*
VT H – 1.8% VT H
VT H – 2.5%
VT H + 1.8%
VT H + 2.5%
V
V
T A = 25°C
T A = 0°C to 70°C
RESET T HRESHOLD T EMPERAT URE
COEFFICIENT
60
35
ppm/°C
µs
VCC T O RESET DELAY
VCC = Falling at 1 mV/µs
RESET ACT IVE T IMEOUT PERIOD
1
20
140
1120
1.4
28
200
1570
2.6
53
370
2960
ms
ms
ms
ms
ADM6315xxD1
ADM6315xxD2
ADM6315xxD3
ADM6315xxD4
MANUAL RESET
Input T hreshold
0.8
V
V
V
V
µs
ns
ns
kΩ
VT H > 4.0 V (VIL)
VT H > 4.0 V (VIH)
VT H < 4.0 V (VIL)
VT H < 4.0 V (VIH)
2.4
0.3 VCC
1
0.7 VCC
Minimum Input Pulse
Glitch Rejection
T o Reset Delay
100
500
63
Pull-Up Resistance
32
100
RESET OUT PUT
Output Voltage
0.4
0.3
0.3
1
V
V
V
µA
VCC > 4.25 V, ISINK = 3.2 mA
VCC > 2.5 V, ISINK = 1.2 mA
VCC > 1 V, ISINK = 80 mA
Output Leakage Current
VCC > VT H, RESET Deasserted
*T he ADM6315 is available with preset reset threshold values from 2.5 V to 5 V at 100 mV increments.
Specifications subject to change without notice.
–2–
REV. A
ADM6315
ABSO LUTE MAXIMUM RATINGS*
(T A = 25°C unless otherwise noted)
P IN CO NFIGURATIO N
T erminal Voltage (With Respect to Ground)
4
3
1
2
V
GND
VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +6 V
All Other Inputs . . . . . . . . . . . . . . . . –0.3 V to VCC + 0.3 V
Input Current
CC
ADM6315
TOP VIEW
(Not to Scale)
RESET
MR
VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
Output Current
RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
Power Dissipation (TA = 70°C)
P IN FUNCTIO N D ESCRIP TIO NS
RT -4, SOT -143
P in Mnem onic
Function
Derate by 4 mW/°C above 70°C . . . . . . . . . . . . . 320 mW
θJA T hermal Impedance . . . . . . . . . . . . . . . . . . . . 330°C/W
Operating T emperature Range . . . . . . . . . . . –40°C to +85°C
Storage T emperature Range . . . . . . . . . . . . –65°C to +160°C
Lead T emperature (Soldering, 10 secs) . . . . . . . . . . . . 300°C
Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . . 215°C
Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220°C
ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 kV
1
2
GND
0 V. Ground reference for all signals.
RESET
Active Low Logic Output. RESET remains
low while VCC is below the reset threshold
or when MR is low; RESET then remains
low for either 1 ms (min), 20 ms (min),
140 ms (min), or 1120 ms (min) after
VCC rises above the reset threshold and
MR is high.
*Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. T his is a stress rating only; functional operation of the
device at these or any other conditions above those listed in the operational
sections of this specification is not implied. Exposure to absolute maximum ratings
for extended periods of time may affect device reliability.
3
4
MR
Manual Reset. This active low debounced
input will ignore input pulses of 100 ns
(typical) and is guaranteed to accept input
pulses of greater than 1 µs. Leave floating
when not used.
VCC
Monitored Supply Voltage
O RD ERING GUID E
Tem perature
Range
P ackage
D escription
P ackage
O ption
Model
ADM6315–xxxxxxx-xx*
–40°C to +85°C
Plastic Surface Mount
SOT -143
*Refer to T ables I to IV.
REV. A
–3–
–Typical Performance Characteristics
ADM6315
800
700
600
500
400
300
200
100
0
10
8
6
4
2
0
V
= 5.5
CC
V
= 3
= 1
CC
CC
V
–100
0
–40
–20
0
20
40
60
80
100
125
4
8
20
60
100
400
800 1200 1600
TEMPERATURE – ؇C
RESET COMPARATOR OVERDRIVE, V –V – mV
TH CC
TPC 1. Supply Current vs. Temperature
TPC 4. Maximum Transient Duration vs.
RESET Comparator Overdrive
450
400
350
300
250
200
150
100
1.005
1.000
V
= 20mV
OD
0.995
0.990
V
= 125mV
OD
50
0
V
= 200mV
OD
–40
–20
0
20
40
60
80
100
125
–40
–20
0
20
40
60
80
100
125
TEMPERATURE – ؇C
TEMPERATURE – ؇C
TPC 2. Power-Down Reset Delay vs. Temperature
TPC 5. Normalized Reset Threshold vs.
Temperature (VCC Falling)
1.06
1.04
1.02
1.00
0.98
0.96
0.94
12
10
8
+85؇C
6
–40؇C
+25؇C
4
2
0
–40
–20
0
20
40
60
80
100
125
0
1
2
3
4
5
TEMPERATURE – ؇C
SUPPLY VOLTAGE – V
TPC 3. Normalized Reset Timeout Period vs. Temperature
(VCC Rising)
TPC 6. Supply Current vs. Supply Voltage
–4–
REV. A
ADM6315
MANUAL RESET INP UT
INTERFACING TO O TH ER D EVICES
O UTP UT
T he ADM6315 also provides an additional input, MR. T his
input can be used either as a means for the system operator to
manually reset the system via a switch or for a digital circuit to
reset the system.
T he ADM6315 series is designed to integrate with as many
devices as possible. One feature of the ADM6315 is the RESET
open drain output, which can sink current from sources with a
voltage greater than the VCC of the ADM6315 input, making it
suitable for use in more diverse applications.
T he MR input will (typical) ignore negative going pulses faster
than 100 ns and is guaranteed to accept any negative going
input pulse of a duration greater than or equal to 1 µs. If MR is
connected to long cables or used in a noisy environment, then
placing a 1 µF decoupling capacitor between the MR input and
ground will further improve the glitch immunity of the ADM6315.
TH E BENEFITS O F A VERY ACCURATE RESET
TH RESH O LD
Because the ADM6315 series can operate effectively even when
there are large degradations of the supply voltages (due to an
accurate internal voltage reference circuit), the possibility of a
malfunction during a power failure is greatly reduced.
V
TRIP-POINT (MAX)
CC
V
TRIP-POINT
CC
V
TRIP-POINT (MIN)
CC
V
CC
V
CC
V
TRIP-POINT(MAX)
CC
RESET ACTIVE TIMEOUT
V
TRIP-POINT
CC
V
TRIP-POINT (MIN)
CC
V
TO RESET
DELAY
CC
RST
RST
VOL
Figure 3. VCC Power-Up Timing Diagram
Figure 2. VCC Power-Down/Brownout Timing Diagram
TRANSIENT IMMUNITY
As well as being an accurate reset circuit, the ADM6315 has
good immunity to negative going transients (T PC 4). Because
of this characteristic, the ADM6315 is suitable for use in noisy
environments.
D ETAILED D ESCRIP TIO N
T he ADM6315 is designed to protect the integrity of a systems
operation by ensuring the proper operation of the system during
power-up, power-down and brownout conditions.
T PC 4 shows the reset comparator overdrive (the maximum
magnitude of negative going pulses with respect to the typical
reset threshold) versus pulse duration, without causing a reset.
When the ADM6315 is powered-up (depending on the selected
reset active timeout), the RESET output of the ADM6315 will
remain low for a period typically equalling the Reset Active
T imeout Period. T his is designed to give the system time to
power-up correctly and for the power supply to stabilize before
any devices are brought out of reset and allowed to begin executing
instructions. Initializing a system in this way provides a more
reliable startup for microprocessor systems.
When a brownout condition occurs (assuming VCC is falling at
1 mV/µs), the ADM6315 will produce a reset in typically 35 µs.
Producing a reset this fast means that the entire system can be
reset together before any part of the system’s voltage falls below
its recommended operating voltage. T his can avoid dangerous
and/or erroneous operation of a microprocessor-based system.
REV. A
–5–
ADM6315
Table I.
Table II.
Min
Min
Trip-
P oint
Tim eout
(m s)
Trip-
P oint
Tim eout
(m s)
Model*
Brand
Model*
Brand
ADM6315-50D1ART -RL7 5.00
ADM6315-50D1ART -RL 5.00
ADM6315-49D1ART -RL7 4.90
ADM6315-49D1ART -RL 4.90
ADM6315-48D1ART -RL7 4.80
ADM6315-48D1ART -RL 4.80
ADM6315-47D1ART -RL7 4.70
ADM6315-47D1ART -RL 4.70
ADM6315-46D1ART -RL7 4.63
ADM6315-46D1ART -RL 4.63
ADM6315-45D1ART -RL7 4.50
ADM6315-45D1ART -RL 4.50
ADM6315-44D1ART -RL7 4.39
ADM6315-44D1ART -RL 4.39
ADM6315-43D1ART -RL7 4.30
ADM6315-43D1ART -RL 4.30
ADM6315-42D1ART -RL7 4.20
ADM6315-42D1ART -RL 4.20
ADM6315-41D1ART -RL7 4.10
ADM6315-41D1ART -RL 4.10
ADM6315-40D1ART -RL7 4.00
ADM6315-40D1ART -RL 4.00
ADM6315-39D1ART -RL7 3.90
ADM6315-39D1ART -RL 3.90
ADM6315-38D1ART -RL7 3.80
ADM6315-38D1ART -RL 3.80
ADM6315-37D1ART -RL7 3.70
ADM6315-37D1ART -RL 3.70
ADM6315-36D1ART -RL7 3.60
ADM6315-36D1ART -RL 3.60
ADM6315-35D1ART -RL7 3.50
ADM6315-35D1ART -RL 3.50
ADM6315-34D1ART -RL7 3.40
ADM6315-34D1ART -RL 3.40
ADM6315-33D1ART -RL7 3.30
ADM6315-33D1ART -RL 3.30
ADM6315-32D1ART -RL7 3.20
ADM6315-32D1ART -RL 3.20
ADM6315-31D1ART -RL7 3.08
ADM6315-31D1ART -RL 3.08
ADM6315-30D1ART -RL7 3.00
ADM6315-30D1ART -RL 3.00
ADM6315-29D1ART -RL7 2.93
ADM6315-29D1ART -RL 2.93
ADM6315-28D1ART -RL7 2.80
ADM6315-28D1ART -RL 2.80
ADM6315-27D1ART -RL7 2.70
ADM6315-27D1ART -RL 2.70
ADM6315-26D1ART -RL7 2.63
ADM6315-26D1ART -RL 2.63
ADM6315-25D1ART -RL7 2.50
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
MDZ
MDZ
MDY
MDY
MDX
MDX
MDW
MDW
MDV
MDV
MDU
MDU
MDT
MDT
MDS
MDS
MDR
MDR
MDQ
MDQ
MDP
MDP
MDO
MDO
MDN
MDN
MDM
MDM
MDL
MDL
MDK
MDK
MDJ
ADM6315-50D2ART -RL7 5.00
ADM6315-50D2ART -RL 5.00
ADM6315-49D2ART -RL7 4.90
ADM6315-49D2ART -RL 4.90
ADM6315-48D2ART -RL7 4.80
ADM6315-48D2ART -RL 4.80
ADM6315-47D2ART -RL7 4.70
ADM6315-47D2ART -RL 4.70
ADM6315-46D2ART -RL7 4.63
ADM6315-46D2ART -RL 4.63
ADM6315-45D2ART -RL7 4.50
ADM6315-45D2ART -RL 4.50
ADM6315-44D2ART -RL7 4.39
ADM6315-44D2ART -RL 4.39
ADM6315-43D2ART -RL7 4.30
ADM6315-43D2ART -RL 4.30
ADM6315-42D2ART -RL7 4.20
ADM6315-42D2ART -RL 4.20
ADM6315-41D2ART -RL7 4.10
ADM6315-41D2ART -RL 4.10
ADM6315-40D2ART -RL7 4.00
ADM6315-40D2ART -RL 4.00
ADM6315-39D2ART -RL7 3.90
ADM6315-39D2ART -RL 3.90
ADM6315-38D2ART -RL7 3.80
ADM6315-38D2ART -RL 3.80
ADM6315-37D2ART -RL7 3.70
ADM6315-37D2ART -RL 3.70
ADM6315-36D2ART -RL7 3.60
ADM6315-36D2ART -RL 3.60
ADM6315-35D2ART -RL7 3.50
ADM6315-35D2ART -RL 3.50
ADM6315-34D2ART -RL7 3.40
ADM6315-34D2ART -RL 3.40
ADM6315-33D2ART -RL7 3.30
ADM6315-33D2ART -RL 3.30
ADM6315-32D2ART -RL7 3.20
ADM6315-32D2ART -RL 3.20
ADM6315-31D2ART -RL7 3.08
ADM6315-31D2ART -RL 3.08
ADM6315-30D2ART -RL7 3.00
ADM6315-30D2ART -RL 3.00
ADM6315-29D2ART -RL7 2.93
ADM6315-29D2ART -RL 2.93
ADM6315-28D2ART -RL7 2.80
ADM6315-28D2ART -RL 2.80
ADM6315-27D2ART -RL7 2.70
ADM6315-27D2ART -RL 2.70
ADM6315-26D2ART -RL7 2.63
ADM6315-26D2ART -RL 2.63
ADM6315-25D2ART -RL7 2.50
ADM6315-25D2ART -RL 2.50
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
MEZ
MEZ
MEY
MEY
MEX
MEX
MEW
MEW
MEV
MEV
MEU
MEU
MET
MET
MES
MES
MER
MER
MEQ
MEQ
MEP
MEP
MEO
MEO
MEN
MEN
MEM
MEM
MEL
MEL
MEK
MEK
MEJ
MDJ
MDI
MDI
MEJ
MEI
MEI
MDH
MDH
MDG
MDG
MDF
MDF
MDE
MDE
MDD
MDD
MDC
MDC
MDB
MDB
MDA
MDA
MEH
MEH
MEG
MEG
MEF
MEF
MEE
MEE
MED
MED
MEC
MEC
MEB
MEB
MEA
MEA
ADM6315-25D1ART -RL
2.50
NOT ES
ADM6315-xxxxxxx-RL7 are in reels of 3,000 pieces.
ADM6315-xxxxxxx-RL are in reels of 10,000 pieces.
*Only available in reels.
–6–
REV. A
ADM6315
Table III.
Table IV.
Min
Min
Trip-
P oint
Tim eout
(m s)
Trip-
P oint
Tim eout
(m s)
Model*
Brand
Model*
Brand
ADM6315-50D3ART -RL7
ADM6315-50D3ART -RL
ADM6315-49D3ART -RL7
ADM6315-49D3ART -RL
ADM6315-48D3ART -RL7
ADM6315-48D3ART -RL
ADM6315-47D3ART -RL7
ADM6315-47D3ART -RL
5.00
5.00
4.90
4.90
4.80
4.80
4.70
4.70
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
MFZ
MFZ
MFY
MFY
MFX
MFX
MFW
MFW
MFV
MFV
MFU
MFU
MFT
MFT
MFS
MFS
MFR
MFR
MFQ
MFQ
MFP
MFP
MFO
MFO
MFN
MFN
MFM
MFM
MFL
MFL
MFK
MFK
MFJ
ADM6315-50D4ART -RL
ADM6315-50D4ART -RL7
ADM6315-49D4ART -RL
ADM6315-49D4ART -RL7
ADM6315-48D4ART -RL
ADM6315-48D4ART -RL7
ADM6315-47D4ART -RL
ADM6315-47D4ART -RL7
ADM6315-46D4ART -RL
ADM6315-46D4ART -RL7
ADM6315-45D4ART -RL
ADM6315-45D4ART -RL7
ADM6315-44D4ART -RL
ADM6315-44D4ART -RL7
ADM6315-43D4ART -RL
ADM6315-43D4ART -RL7
ADM6315-42D4ART -RL
ADM6315-42D4ART -RL7
ADM6315-41D4ART -RL
ADM6315-41D4ART -RL7
ADM6315-40D4ART -RL
ADM6315-40D4ART -RL7
ADM6315-39D4ART -RL
ADM6315-39D4ART -RL7
ADM6315-38D4ART -RL
ADM6315-38D4ART -RL7
ADM6315-37D4ART -RL
ADM6315-37D4ART -RL7
ADM6315-36D4ART -RL
ADM6315-36D4ART -RL7
ADM6315-35D4ART -RL
ADM6315-35D4ART -RL7
ADM6315-34D4ART -RL
ADM6315-34D4ART -RL7
ADM6315-33D4ART -RL
ADM6315-33D4ART -RL7
ADM6315-32D4ART -RL
ADM6315-32D4ART -RL7
AD M6315-31D 4ART-RL
5.00
5.00
4.90
4.90
4.80
4.80
4.70
4.70
4.63
4.63
4.50
4.50
4.39
4.39
4.30
4.30
4.20
4.20
4.10
4.10
4.00
4.00
3.90
3.90
3.80
3.80
3.70
3.70
3.60
3.60
3.50
3.50
3.40
3.40
3.30
3.30
3.20
3.20
3.08
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
MGZ
MGZ
MGY
MGY
MGX
MGX
MGW
MGW
MGV
MGV
MGU
MGU
MGT
MGT
MGS
MGS
MGR
MGR
MGQ
MGQ
MGP
MGP
MGO
MGO
MGN
MGN
MGM
MGM
MGL
MGL
MGK
MGK
MGJ
AD M6315-46D 3ART-RL7 4.63
AD M6315-46D 3ART-RL 4.63
AD M6315-45D 3ART-RL7 4.50
AD M6315-45D 3ART-RL
ADM6315-44D3ART -RL7
ADM6315-44D3ART -RL
ADM6315-43D3ART -RL7
ADM6315-43D3ART -RL
ADM6315-42D3ART -RL7
ADM6315-42D3ART -RL
ADM6315-41D3ART -RL7
ADM6315-41D3ART -RL
ADM6315-40D3ART -RL7
ADM6315-40D3ART -RL
ADM6315-39D3ART -RL7
ADM6315-39D3ART -RL
ADM6315-38D3ART -RL7
ADM6315-38D3ART -RL
ADM6315-37D3ART -RL7
ADM6315-37D3ART -RL
ADM6315-36D3ART -RL7
ADM6315-36D3ART -RL
ADM6315-35D3ART -RL7
ADM6315-35D3ART -RL
ADM6315-34D3ART -RL7
ADM6315-34D3ART -RL
ADM6315-33D3ART -RL7
ADM6315-33D3ART -RL
ADM6315-32D3ART -RL7
ADM6315-32D3ART -RL
4.50
4.39
4.39
4.30
4.30
4.20
4.20
4.10
4.10
4.00
4.00
3.90
3.90
3.80
3.80
3.70
3.70
3.60
3.60
3.50
3.50
3.40
3.40
3.30
3.30
3.20
3.20
MFJ
MFI
MFI
MGJ
MGI
MGI
MFH
MFH
MFG
MFG
MFF
MFF
MFE
MFE
MFD
MFD
MFC
MFC
MFB
MFB
MFA
MFA
MGH
MGH
MGG
MGG
MGF
MGF
MGE
MGE
MGD
MGD
MGC
MGC
MGB
MGB
MGA
MGA
AD M6315-31D 3ART-RL7 3.08
AD M6315-31D 3ART-RL
ADM6315-30D3ART -RL7
ADM6315-30D3ART -RL
ADM6315-29D3ART -RL7
ADM6315-29D3ART -RL
ADM6315-28D3ART -RL7
ADM6315-28D3ART -RL
ADM6315-27D3ART -RL7
ADM6315-27D3ART -RL
ADM6315-26D3ART -RL7
ADM6315-26D3ART -RL
ADM6315-25D3ART -RL7
ADM6315-25D3ART -RL
3.08
3.00
3.00
2.93
2.93
2.80
2.80
2.70
2.70
2.63
2.63
2.50
2.50
AD M6315-31D 4ART-RL7 3.08
ADM6315-30D4ART -RL
ADM6315-30D4ART -RL7
ADM6315-29D4ART -RL
ADM6315-29D4ART -RL7
ADM6315-28D4ART -RL
ADM6315-28D4ART -RL7
ADM6315-27D4ART -RL
ADM6315-27D4ART -RL7
AD M6315-26D 4ART-RL
3.00
3.00
2.93
2.93
2.80
2.80
2.70
2.70
2.63
AD M6315-26D 4ART-RL7 2.63
ADM6315-25D4ART -RL
ADM6315-25D4ART -RL7
2.50
2.50
NOT ES
All parts in bold are ex-stock. Consult factory for availability of orders.
ADM6315-xxxxxxx-RL7 are in reels of 3,000 pieces.
ADM6315-xxxxxxx-RL are in reels of 10,000 pieces.
*Only available in reels.
REV. A
–7–
ADM6315
O UTLINE D IMENSIO NS
D imensions shown in inches and (mm).
4-Lead P lastic Surface Mount P ackage
(SO T-143)
0.079 (2.00)
0.071 (1.80)
4
1
3
2
0.055 (1.40)
0.047 (1.20)
0.098 (2.50)
0.083 (2.10)
PIN 1
0.080 (2.03)
0.070 (1.78)
0.120 (3.05)
0.105 (2.67)
7؇
0.004 (0.10)
0.001 (0.03)
0.040 (1.02)
0.031 (0.79)
8؇
0؇
0.0059 (0.089)
0.0035 (0.15)
0.037 (0.94)
0.030 (0.77)
0.021 (0.54)
0.015 (0.38)
0.010 (0.25)
0.005 (0.13)
SEATING
PLANE
Revision History
Location
P age
D ata Sheet changed fr om REV. 0 to REV. A.
Edits to T able III . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Edits to T able IV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
–8–
REV. A
相关型号:
ADM6315-32D2ART-RL
IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4, PLASTIC, SOT-143, 4 PIN, Power Management Circuit
ADI
ADM6315-32D2ART-RL7
IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4, PLASTIC, SOT-143, 4 PIN, Power Management Circuit
ADI
ADM6315-32D3ART-RL
IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4, PLASTIC, SOT-143, 4 PIN, Power Management Circuit
ADI
ADM6315-32D3ART-RL7
IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4, PLASTIC, SOT-143, 4 PIN, Power Management Circuit
ADI
ADM6315-32D4ART-RL
IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4, PLASTIC, SOT-143, 4 PIN, Power Management Circuit
ADI
ADM6315-32D4ART-RL7
IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4, PLASTIC, SOT-143, 4 PIN, Power Management Circuit
ADI
ADM6315-33D1ART-RL
IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4, PLASTIC, SOT-143, 4 PIN, Power Management Circuit
ADI
ADM6315-33D1ART-RL7
IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4, PLASTIC, SOT-143, 4 PIN, Power Management Circuit
ADI
ADM6315-33D2ART-RL
IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4, PLASTIC, SOT-143, 4 PIN, Power Management Circuit
ADI
ADM6315-33D2ART-RL7
IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4, PLASTIC, SOT-143, 4 PIN, Power Management Circuit
ADI
ADM6315-33D3ART-RL
IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4, PLASTIC, SOT-143, 4 PIN, Power Management Circuit
ADI
ADM6315-33D3ART-RL7
IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4, PLASTIC, SOT-143, 4 PIN, Power Management Circuit
ADI
©2020 ICPDF网 联系我们和版权申明