- 最新上传
SANYOU
LMS-04-S
Plug-in Signal Conditioners M-UNIT
MSYSTEM
MSYSTEM
FJR-36-K/BL
Space-saving Plug-in Signal Conditioners F-UNIT
MSYSTEM
MS9595-378
BRACKET, ANGLE, 90°, CRES UNS S32100, .190 X .375 BOLT
UMPCO
NUVOTON
MSYSTEM
LMS-0G-S
Plug-in Signal Conditioners M-UNIT
MSYSTEM
ZA016SDDT8
Recommended hole size is 22.5 mm. Thread front will fit standard 22.5mm hole
MSPI
MSYSTEM
BD9P205EFV-C
BD9P系列是兼顾高速响应和高效率的42V耐压车载一次DC/DC转换器IC。其特点是通过Nano Pulse Control™实现的稳定且较大的降压比、通过扩频功能实现的低EMI（低噪声）、在电池刚启动时也能稳定供电的高速响应性能，有助于降低系统功耗和降低BOM成本。包括ADAS的传感器、摄像头、雷达，以及车载信息娱乐、仪表盘、 BCM（车身控制模块）在内，适用于汽车中要求小型化、高效率化、高可靠性的应用。8-channel power tree Reference DesignFor automotive ADAS and Info-Displaya.productlink{color: #dc2039; text-decoration: underline !important;}a.productlink:hover {opacity: 0.6;}
ROHM
10DAW4_4805S1.5
10W - Dual/Single Output - 4:1 Wide Input - Isolated & Regulated
GAPTEC
CK-COMPONENTS
T25S64BTIPR
3V 128M-BIT SERIAL NOR FLASH WITH DUAL AND QUAD SPI&QPI
HMSEMI
ICT
MSYSTEM
MLS-AC-J
Plug-in Signal Conditioners M-UNIT
MSYSTEM
TOSHIBA
NUVOTON
WALSIN
TI
LM0402-11NG-N
This specification applies to Wire Wound Ceramic Chip Inductors
LEIDITECH
EMF107B7104KAHT
High Reliability (Automotive) Application Multilayer Ceramic Capacitors
TAIYO YUDEN
BD60HA3MEFJ-M
BDxxHA3MEFJ-M系列是可提供0.3A输出电流的稳压器。输出精度为±1%。有可使用外接电阻在1.5V～7.0V范围内任意设置输出电压的可变型以及1.5V/1.8V/2.5V/3.0V/3.3V/5V/6V/7V固定输出型两种。封装组件采用散热性优良的HTSOP-J8。本机型内置用于防止因输出短路等发生IC破坏的过电流保护电路、关断时使电路电流为0µA的ON/OFF开关、以及防止因过负荷状态等使IC发生热破坏的温度保护电路。另外，采用了陶瓷电容器，有助于整机的小型化和长寿化。
ROHM
MURATA
MSYSTEM
MSYSTEM
TI
MSYSTEM
NXP
- 元器件品牌
KYOCERA AVX
AMPHENOL
SAMTEC
WALSIN
VISHAY
MSYSTEM
GLENAIR
ITT
MICROSEMI
YAGEO
ECLIPTEK
ABRACON
MOLEX
VICOR
KEMET
MTRONPTI
TI
PANASONIC
CTS
SCHURTER
KNOWLES
MURATA
TE
TOREX
SILICON
BOURNS
GOLLEDGE
STMICROELECTRONICS
RCD
BEL
NXP
MICROCHIP
TDK
KOA
INFINEON
FOXCONN
EUROQUARTZ
MAXIM
LITTELFUSE
VCC
RENESAS
CDE
IDT
AVAGO
HONEYWELL
ONSEMI
FH
NICHICON
APITECH
ROHM
EPCOS
AGILENT
GRAYHILL
ADI
Carling Technologies
RICOH
