ANT-916-WRT-RPS [ETC]
Adhesive or permanent mount;型号: | ANT-916-WRT-RPS |
厂家: | ETC |
描述: | Adhesive or permanent mount |
文件: | 总1页 (文件大小:856K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
™
ANT-916-WRT-xxx DATA SHEET
Product Dimensions
Description
The WRT Series antenna is ideally suited for
applications such as wireless vending, security,
traffic, or power equipment which require an
unobtrusive, tamper-resistant antenna solution.
The tiny 19 x 11mm radome installs through a
small hole on the product and is anchored by a
threaded base. An adhesive foam compression
ring is used to resist the elements. The 1/4-wave
0.75”
(19.0)
0.43”
(11.0)
Adhesive Ring
Remove protective plastic
before installation
antenna also features an integral counterpoise,
which eliminates the need for a proximity
ground plane. The antenna's coax feed is available with SMA or
RP-SMA terminations. Alternate coax lengths, connectors and
custom colors are available for volume OEM customers.
0.24”
(6.0)
M11x1.0mm
Thread
Features
· Low cost
· Unobtrusive
· Tamper resistant
· Integral counterpoise
· Indoor / outdoor
· Adhesive or permanent mount
0.207”
(5.26)
3.25”
(82.5)
Electrical Specifications
· Center Freq.
· Recommended Oper. Freq.
· Wavelength
· VSWR
· Impedance
916MHz
900-930MHz
1/4-wave
<1.9 typ. at center
50 ohms
· Connector
RP-SMA or SMA
Electrical specifications and plots measured on 24”x 24” reference ground plane
Ordering Information
· ANT-916-WRT-RPS (with RP-SMA connector)
· ANT-916-WRT-SMA (with SMA connector)
RG-174 Cable Length
VSWR Graph
8.50”
S11 SWR
1.753
(216.0)
CENTER 916.000MHz
SPAN 200.000MHz
Typical VSWR
Antenna Factor 159 Ort Lane Merlin, OR 97532 www.antennafactor.com
541-956-0931 (phone) 541-471-6251 (fax)
Rev 5-24-10
相关型号:
©2020 ICPDF网 联系我们和版权申明