AP-UM001GN10CS-MH [ETC]
USB-Disk Moduleâ ¡Plus;型号: | AP-UM001GN10CS-MH |
厂家: | ETC |
描述: | USB-Disk Moduleâ ¡Plus |
文件: | 总22页 (文件大小:444K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RoHS Compliant
Ⅱ
USB-Disk Module Plus
Specification
May 24, 2011
Version 1.1
Apacer Technology Inc.
4th Fl., 75 Hsin Tai Wu Rd., Sec.1, Hsichih, New Taipei City, Taiwan 221
Tel: +886-2-2698-2888
www.apacer.com
Fax: +886-2-2698-2889
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
FEATURES:
•
USB2.0 High-Speed and USB1.1 Full-
•
Zero Power Data Retention
Speed compatible interface
–
Batteries not required for data storage
•
Capacity
•
•
Support Ready Boost for Windows Vista
–
–
256, 512 MB
1, 2, 4, 8 GB
Support boot-up function for OS
Windows XP Embedded
Windows CE
–
–
–
•
•
•
Fast sustained read performance
–
–
–
Sustained read: 30 MB/s
Linux
Fast sustained write performance
•
Temperature ranges
Sustained write: 25 MB/s
–
–
–
0°C to 70°C for operation (standard)
1
-40°C to 85°C for operation (ET )
Intelligent USB Module
-40°C to 100°C for storage
Implements dynamic wear-leveling
algorithms to substantially increase
longevity of flash media
BCH (24 bit) Error Detection Code/Error
Correction Code (EDC/ECC)
Intrinsic data integrity after power loss
Wear leveling algorithm that provides more
reliable data storage over an extended
period
•
•
Power consumption (typical)
Active mode: 181 mA
–
–
–
Sleep mode: 402 μA
Connector
–
–
–
10-pin (2x5) female header
•
•
RoHS Compliant
Support Non-Removable Setting2
•
Extended Data Protection (Optional)
Write protection setting by jumper for
prevention of data overwrites.
–
1. Extended Temperature
2. Standard Temperature Exclusive
1
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
TABLE OF CONTENTS
1. General Description ..............................................................................3
1.1 Performance-optimized Controller.......................................................................................................3
1.1.1 Power Management Unit (PMU) ...................................................................................................................3
1.1.2 SRAM Buffer .................................................................................................................................................3
1.1.3 Error Correction Code (ECC) ........................................................................................................................3
1.1.4 Wear-Leveling...............................................................................................................................................3
1.1.5 Write Protection Mode (Optional)..................................................................................................................3
2. Functional Block Diagram.....................................................................4
3. Pin Assignment......................................................................................5
3.1 Type A, Type B, Type C, and Type E..................................................................................................5
3.2 Type D﹙STD﹚...................................................................................................................................6
3.3 Type D﹙LP﹚ .....................................................................................................................................7
4. Capacity Specifications........................................................................8
4.1 Functional Specifications.....................................................................................................................8
4.2 Environmental Specifications ..............................................................................................................8
5. Electrical Specification ........................................................................9
5.1 AC Characteristics...............................................................................................................................9
6. Physical Dimension.............................................................................10
6.1 Horizontal Design ..............................................................................................................................10
6.1.1 Type A (STD 90D)......................................................................................................................................10
6.1.2 Type B (STD 90D-MH)...............................................................................................................................11
6.1.3 Type C (STD 90D-MS)...............................................................................................................................12
6.2 Vertical Design ..................................................................................................................................13
6.2.1 Type D (STD 180D)....................................................................................................................................13
6.3 Low Profile Design.............................................................................................................................14
6.3.1 Type D (LP 180D) .......................................................................................................................................14
6.3.2 Type E (LP 90D-MS)...................................................................................................................................15
7. Product Ordering Information.............................................................16
7.1 Product Code Designation ................................................................................................................16
7.2 Valid Combinations............................................................................................................................17
7.2.1 Type A (STD 90D)......................................................................................................................................17
7.2.2 Type B (STD 90D-MH)...............................................................................................................................17
7.2.3 Type C (STD 90D-MS)...............................................................................................................................17
7.2.4 Type D (STD 180D)....................................................................................................................................18
7.2.5 Type D (LP 180D) ......................................................................................................................................18
7.2.6 Type E (LP 90D-MS)..................................................................................................................................18
2
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
1. General Description
Apacer’s USB-Disk Module (UDM) is a high performance, embedded solid state drive (SSD) designed to
replace a conventional IDE hard disk drive. UDM SSD can be plugged into a standard Embedded USB
connector commonly found in desktops, portable PC systems and industrial PC systems. This product is
well suited for embedded flash storage applications offering new and expanded functionality as well as
more cost-effective designs, better performance and increased reliability.
1.1 Performance-optimized Controller
The heart of an UDM is the USB controller, which translates standard USB signals into the data and
controls of the flash media. This proprietary USB controller is specifically designed to attain high data
throughput from host to flash.
1.1.1 Power Management Unit (PMU)
The power management unit (PMU) controls the power consumption of the UDM. It can dramatically
extend product battery life by leaving the idle part of the circuitry into sleep mode. The PMU has zero
wake-up latency.
1.1.2 SRAM Buffer
The SRAM buffer is a key contributor to the USB controller performance. It optimizes data writes to the
flash.
1.1.3 Error Correction Code (ECC)
The UDM uses BCH Error Detection Code (EDC) and Error Correction Code (ECC) algorithms which
correct up to 24 random single-bit errors for each 1024-byte block of data depending on spare area of
flash memory. High performance is achieved through hardware-based error detection and correction.
1.1.4 Wear-Leveling
Flash memory can be erased a limited number of times, This number is called the erase cycle limit, or
write endurance limit, The erase cycle limit applies to each individual erase block in the flash device.
In a typical application, and especially if a file system is used, specific pages are constantly updated (e.g.,
the page that contains the FAT, registry, etc.). Without any special handling, these pages would wear out
more rapidly than other pages, reducing the lifetime of the entire flash.
To overcome this inherent deficiency, Apacer’s USB-Disk Module (UDM) uses wear-leveling algorithm.
This wear-leveling algorithm ensures that consecutive writes of a specific sector are not written physically
to the same page in the flash. This spreads flash media usage evenly across all pages, thereby
maximizing flash lifetime.
The wear-leveling mechanism provides more than 100,000 write/erase cycles for reliable data storage
over an extended period.
1.1.5 Write Protection Mode (Optional)
When the device is configured to the Write-Protection mode, it enhances the data security and protection.
This feature prevents the stored data from inadvertent system writes or erases, and viruses.
3
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
2. Functional Block Diagram
The USB-Disk Module (UDM) contains a controller, embedded firmware, and Flash Media with a female
connector. The UDM interfaces with the host system allowing data to be written to and read from the
Flash Media.
Flash
Media
Flash
Management
Controller
Host
USB Interface
Flash
Media
Figure 2-1: Functional block diagram
4
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
3. Pin Assignment
This chapter provides the information on the pin assignments and signal descriptions.
3.1 Type A, Type B, Type C, and Type E
Table 3-1: Pin Assignment of the 10-pin configuration in Type A, Type B, Type C, and Type E
Pin
1
Signal
+5V
Pin
2
Signal
N.C
3
USB D-
USB D+
GND
4
N.C
5
6
N.C
7
8
N.C
9
Key (Blocked)
10
N.C
5
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
3.2 Type D﹙STD﹚
Table 3-2: Pin Assignment of the 10-pin configuration in Type D (STD)
Pin
1
Signal
+5V
Pin
2
Signal
+5V
3
USB D-
USB D+
GND
4
N.C
5
6
N.C
7
8
GND
GND
9
Key (Blocked)
10
6
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
3.3 Type D﹙LP﹚
Table 3-3: Pin Assignment of the 10-pin configuration in Type D (LP)
Pin
1
Signal
+5V
Pin
2
Signal
N.C
3
USB D-
USB D+
GND
4
N.C
5
6
N.C
7
8
N.C
9
Key (Blocked)
10
N.C
7
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
4. Capacity Specifications
The USB-Disk Module product family is available as below table matrix.
Table 4-1: Capacity Specification
Density
256MB
512 MB
1GB
Total Bytes
254,509,056
512,458,752
1,028,358,144
2,060,156,928
4,120,920,064
8,248,131,584
2GB
4GB
8GB
4.1 Functional Specifications
Table 4-2: Performance Specifications
Capacity
256 MB
512 MB / 1 GB
2 GB
4 GB
8 GB
Performance
Sustained read (MB/s)
Sustained write (MB/s)
15
9
25
10
25
15
30
25
25
20
4.2 Environmental Specifications
Environmental specification of the USB-Disk Module (UDM) product family which follows the MIL-STD-
810F standards is available as shown in Table 4-2.
Table 4-2: Environmental Specifications
Operation 0°C to 70°C (Std.); -40°C to 85°C (Ext. Temp.)
Temperature
Storage
-40°C to 100°C
Vibration
Shock
EMC
10 Hz to 500 Hz, 15G, 3 axes, 30 minutes (IEC 68-2-6)
Duration: 11 ms, 50G, 3 axes, 18 times (IEC 68-2-27)
FCC, CE
8
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
5. Electrical Specification
Caution: Absolute Maximum Stress Ratings – Applied conditions greater than those listed under
“Absolute Maximum Stress Ratings” may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these conditions or conditions greater than those defined in
the operational sections of this data sheet is not implied. Exposure to absolute maximum stress rating
conditions may affect device reliability.
Table 5-1: Operating Range
Range
Ambient Temperature
0°C to 70°C
Voltage
Standard
4.5-5.5V
Extended Temperature
-40°C to 85°C
Table 5-2: Absolute maximum power pin stress ratings
Parameter
Power Supply Input
Symbol
DD- SS
IN
Min
-0.3
Max
5.5
Unit
V
V
V
Voltage on any pin except VDD with respect to GND
V
–
ss - 0.3
V
DD +0.3
V
5.1 AC Characteristics
Table 5-3: AC Characteristics Full Speed
Parameter
Symbol
Min
Typ
Max
Unit
─
Rise Time
TFR
4
20
ns
─
─
Fall Time
TFF
TFRFM
ZDRV
4
20
111.11
44
ns
%
Differential Rise and
Fall Time Matching
90
28
Driver Output
Resistance
Ω
Table 5-4: AC Characteristics High Speed
Parameter
Symbol
Min
Typ
Max
Unit
─
─
Rise Time (10%~90%)
THSR
500
ps
─
─
─
Fall Time (10%~90%)
THSF
500
ps
Driver Output
Resistance
Ω
ZHSDRV
40.5
49.5
9
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
6. Physical Dimension
6.1 Horizontal Design
6.1.1 Type A (STD 90D)
Standard 90 degree
Length
28.8mm
Width
26.65mm Height (Max)
10.5 mm
Unit: mm
Tolerance: ±0.2
10
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
6.1.2 Type B (STD 90D-MH)
Standard 90 Degree Mounting Header
Length
37.8mm
Width
26.65mm Height (Max)
10.5 mm
Unit: mm
Tolerance: ±0.2
11
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
6.1.3 Type C (STD 90D-MS)
Standard 90 Degree Mounting Screw
Length
37.8mm
Width
26.65mm Height (Max)
10.5 mm
Unit: mm
Tolerance: ±0.2
12
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
6.2 Vertical Design
6.2.1 Type D (STD 180D)
Standard 180 Degree
Length
37.3mm
Width
26.65mm Height (Max)
8.5 mm
Unit: mm
Tolerance: ±0.2
13
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
6.3 Low Profile Design
6.3.1 Type D (LP 180D)
Low Profile 180 Degree
Length
31.95mm Width
24mm
Height (Max)
5 mm
Unit: mm
Tolerance: ±0.2
14
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
6.3.2 Type E (LP 90D-MS)
Low Profile 90 Degree Mounting Screw
Length
36.8mm
Width
26.5mm
Height (Max)
7.5 mm
Write Protect Read/Write
Unit: mm
Tolerance: ±0.2
15
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
7. Product Ordering Information
7.1 Product Code Designation
A P – U M x x x x X X X X X – XX XX X
Flash Type:
Blank: SA SLC
T: Toshiba SLC
Option:
RB: Ready Boost
WP: Write Protection
NR: Non-Removable
MS: Mounting Screw
MH: Mounting Header
S: Halogen-free Compliant
R: RoHS Compliant
Temperature:
C: Commercial Temperature
E: Extended Temperature
PCB version
Dimension
1 = 90D STD
2 = 180D STD
3 = 90D Low Profile
Solution version
Capacities:
256M = 256MB
512M = 512MB
001G =
002G =
004G =
008G =
1GB
2GB
4GB
8GB
Apacer Product Code
16
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
7.2 Valid Combinations
7.2.1 Type A (STD 90D)
Standard 90 degree
Capacity
256MB
512MB
1GB
Standard
Extended Temperature
AP-UM256MQ10ES
AP-UM512MQ10ES
AP-UM001GQ10ES
AP-UM002GQ10ES
AP-UM004GQ10ES
AP-UM008GQ10ES-T
AP-UM256MN10CS
AP-UM512MN10CS
AP-UM001GN10CS
AP-UM002GN10CS
AP-UM004GN10CS
AP-UM008GN10CS-T
2GB
4GB
8GB
7.2.2 Type B (STD 90D-MH)
Standard 90 Degree Mounting Header
Capacity
256MB
512MB
1GB
Standard
Extended Temperature
AP-UM256MQ10ES-MH
AP-UM512MQ10ES-MH
AP-UM001GQ10ES-MH
AP-UM002GQ10ES-MH
AP-UM004GQ10ES-MH
AP-UM008GQ10ES-MHT
AP-UM256MN10CS-MH
AP-UM512MN10CS-MH
AP-UM001GN10CS-MH
AP-UM002GN10CS-MH
AP-UM004GN10CS-MH
AP-UM008GN10CS-MHT
2GB
4GB
8GB
7.2.3 Type C (STD 90D-MS)
Standard 90 Degree Mounting Screw
Capacity
256MB
512MB
1GB
Standard
Extended Temperature
AP-UM256MQ10ES-MS
AP-UM512MQ10ES-MS
AP-UM001GQ10ES-MS
AP-UM002GQ10ES-MS
AP-UM004GQ10ES-MS
AP-UM008GQ10ES-MST
AP-UM256MN10CS-MS
AP-UM512MN10CS-MS
AP-UM001GN10CS-MS
AP-UM002GN10CS-MS
AP-UM004GN10CS-MS
AP-UM008GN10CS-MST
2GB
4GB
8GB
17
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
7.2.4 Type D (STD 180D)
Standard 180 Degree
Capacity
Standard
Extended Temperature
256MB
512MB
1GB
AP-UM256MN20CS
AP-UM512MN20CS
AP-UM001GN20CS
AP-UM002GN20CS
AP-UM004GN20CS
AP-UM008GN20CS-T
AP-UM256MQ20ES
AP-UM512MQ20ES
AP-UM001GQ20ES
AP-UM002GQ20ES
AP-UM004GQ20ES
AP-UM008GQ20ES-T
2GB
4GB
8GB
7.2.5 Type D (LP 180D)
Low Profile 180 Degree
Capacity
Standard
Extended Temperature
AP-UM256MQ40EG
AP-UM512MQ40EG
AP-UM001GQ40EG
AP-UM002GQ40EG
AP-UM004GQ40EG
AP-UM008GQ40EG-T
256MB
512MB
1GB
AP-UM256MN40CG
AP-UM512MN40CG
AP-UM001GN40CG
AP-UM002GN40CG
AP-UM004GN40CG
AP-UM008GN40CG-T
2GB
4GB
8GB
7.2.6 Type E (LP 90D-MS)
Low Profile 90 Degree Mounting Screw
Capacity
256MB
512MB
1GB
Standard
Extended Temperature
AP-UM256MQ31EG-MS
AP-UM512MQ31EG-MS
AP-UM001GQ31EG-MS
AP-UM002GQ31EG-MS
AP-UM004GQ31EG-MS
AP-UM008GQ31EG-MST
AP-UM256MN31CG-MS
AP-UM512MN31CG-MS
AP-UM001GN31CG-MS
AP-UM002GN31CG-MS
AP-UM004GN31CG-MS
AP-UM008GN31CG-MST
2GB
4GB
8GB
Note: Valid combinations are those products in mass production or will be in mass production. Consult
your Apacer sales representative to confirm availability of valid combinations and to determine availability
of new combinations.
18
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
Revision History
Revision
Description
Date
1.0
1.1
Official Release
May 16, 2011
May 24, 2011
Revised Capacity Specifications
19
© 2011 Apacer Technology, Inc.
Rev. 1.1
ⅡPlus
USB-Disk Module
AP-UMxxxxXXXXX-XXXXX
Global Presence
Apacer Technology Inc.
4th Fl., 75 Xintai 5th Rd., Sec.1
Hsichih, New Taipei City
Taiwan 221
Taiwan (Headquarters)
R.O.C.
Tel: +886-2-2698-2888
Fax: +886-2-2698-2889
amtsales@apacer.com
Apacer Memory America, Inc.
386 Fairview Way, Suite102,
Milpitas, CA 95035
Tel: 1-408-586-1291
Fax: 1-408-935-9611
U.S.A.
Japan
Europe
sa@apacerus.com
Apacer Technology Corp.
5F, Matsura Bldg., Shiba, Minato-Ku
Tokyo, 105-0014, Japan
Tel: 81-3-5419-2668
Fax: 81-3-5419-0018
jpservices@apacer.com
Apacer Technology B.V.
Europalaan 89
5232 BC 'S-Hertogenbosch
The Netherlands
Tel: 31-73-645-9620
Fax: 31-73-645-9629
sales@apacer.nl
Apacer Electronic (Shanghai) Co., Ltd
1301, No.251,Xiaomuqiao Road, Shanghai,
200032, China
Tel: 86-21-5529-0222
Fax: 86-21-5206-6939
China
India
sales@apacer.com.cn
Apacer Technologies Pvt. Ltd.
#143, 1st Floor, Raheja Arcade,
5th Block Kormangala Industrial Layout,
Bangalore - 560095, India
Tel: 91-80-4152-9061
sales_india@apacer.com
20
© 2011 Apacer Technology, Inc.
Rev. 1.1
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Apacer:
AP-UM256MN10CS AP-UM256MN10CS-MH AP-UM256MN10CS-MS AP-UM256MN20CS AP-UM256MN40CG
AP-UM256MN31CG-MS AP-UM256MQ10ES AP-UM256MQ10ES-MH AP-UM256MQ10ES-MS AP-UM256MQ20ES
AP-UM256MQ40EG AP-UM256MQ31EG-MS AP-UM512MN10CS AP-UM512MN10CS-MH AP-UM512MN10CS-MS
AP-UM512MN20CS AP-UM512MN40CG AP-UM512MN31CG-MS AP-UM512MQ10ES AP-UM512MQ10ES-MH AP-
UM512MQ10ES-MS AP-UM512MQ20ES AP-UM512MQ40EG AP-UM512MQ31EG-MS AP-UM001GN10CS AP-
UM001GN10CS-MH AP-UM001GN10CS-MS AP-UM001GN20CS AP-UM001GN40CG AP-UM001GN31CG-MS AP-
UM001GQ10ES AP-UM001GQ10ES-MH AP-UM001GQ10ES-MS AP-UM001GQ20ES AP-UM001GQ40EG AP-
UM001GQ31EG-MS AP-UM002GN10CS AP-UM002GN10CS-MH AP-UM002GN10CS-MS AP-UM002GN20CS AP-
UM002GN40CG AP-UM002GN31CG-MS AP-UM002GQ10ES AP-UM002GQ10ES-MH AP-UM002GQ10ES-MS AP-
UM002GQ20ES AP-UM002GQ40EG AP-UM002GQ31EG-MS AP-UM004GN10CS AP-UM004GN10CS-MH AP-
UM004GN10CS-MS AP-UM004GN20CS AP-UM004GN40CG AP-UM004GN31CG-MS AP-UM004GQ10ES AP-
UM004GQ10ES-MH AP-UM004GQ10ES-MS AP-UM004GQ20ES AP-UM004GQ40EG AP-UM004GQ31EG-MS AP-
UM008GN10CS-T AP-UM008GN10CS-MHT AP-UM008GN10CS-MST AP-UM008GN20CS-T AP-UM008GN40CG-T
AP-UM008GN31CG-MST AP-UM008GQ10ES-T AP-UM008GQ10ES-MHT AP-UM008GQ10ES-MST AP-
UM008GQ20ES-T AP-UM008GQ40EG-T AP-UM008GQ31EG-MST
相关型号:
©2020 ICPDF网 联系我们和版权申明