B14B-PH-K-S [ETC]
Disconnectable Crimp style connectors; 可拆卸式压接式连接器型号: | B14B-PH-K-S |
厂家: | ETC |
描述: | Disconnectable Crimp style connectors |
文件: | 总7页 (文件大小:153K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Emboss Tape
Crimp
PH CO N N ECTO R
Disconnectable Crimp style connectors
2 .0 m m
(.0 7 9 ") p itch
Features ––––––––––––––––––––––––
• Reliable contact
The contact has long dimples near the center to ensure a good
connection at all times, even under conditions of vibration and
mechanical abuse, and when used with low voltage and low
current circuits.
• Easy and effective crimping
Although the contact is compact, it has a long wire strip
holding length of 2.6 +/- 0.4mm (.102" +/-.016"). This long
length simplifies automatic crimping and the crimping of
shielded wires.
• Fully shrouded header
The fully shrouded header has walls on all four sides to
prevent improper connection to the mating housing and to
prevent the instruction of flux and other contaminants.
• High solderable square post
The square post is copper-undercoated and tin/lead-plated for
superior solderability and for whisker prevention.
• Printed circuit board retention mechanism
The solder side of the header has a retention mechanism that
prevents it from floating during soldering. As a result, the
header can be positioned accurately.
This is a thin, low-profile 2.0mm (.079")
pitch connector 7.5mm (.295") in height
after mounting and 4.5mm (.177") in width.
It is designed to meet the demand for
high-density connection of internal wires to
printed circuit boards. It is compact, highly
reliable and low in cost.
• Compatible with the KR insulation displacement
connector
The same shrouded header can be used for either PH crimp-
style connector or KR insulation displacement connector. This
allows both types of connector to be used interchangeably
without replacing the header.
• Surface mount model (SMT)
This connector is also available in a surface mount
configuration. Its housing is made of heat resistant resin so
that it is not adversely affected during reflow soldering.
Because of its tiny size and ability to be surface mounted, this
connector meets the demand for high-density mounting of
components inside electronic products.
6
5
4
3
2
Specifications –––––––––––––––––––
• Current rating: 2A AC, DC (AWG #24)
• Voltage rating: 100V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.
• Insulation resistance:
1,000M Ω min.
• Withstanding voltage: 800V AC/minute
• Applicable wire: AWG #32 to #24
• Applicable PC board thickness: 0.8 to 1.6mm(.031" to .063")
* Contact JST for details
Standards ––––––––––––––––––––––
Recognized E60389
0
Certified LR20812
1
R75087
2
21
PH CO N N ECTO R
Contact –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Applicable wire
Q'ty /
Model No.
reel
2
mm
AWG #
30 to 24
Insulation O.D. mm(in.)
0.9 to 1.5(.035 to .059)
SPH-002T-P0.5S
SPH-004T-P0.5S
0.05 to 0.22
0.032 to 0.08
8,000
5.7(.224)
2.85(.112)
32 to 28
0.5 to 0.9(.020 to .035) 10,000
2.05(.081)
1.0
(.039)
Material and Finish
Phosphor bronze, tin-plated
Note: 1. When using AWG#32 or #30 wires, reflow-treated headers
(Low insertion force type, Model no. B#B-PH-KL or S#B-PH-KL) are
recommendable.
1.5
(.059)
Note: 2. Contact JST for gold-plated contacts.
Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Dimensions mm(in.)
Cir-
cuits
Q’ty /
box
Model No.
A
B
2
3
2.0( .079)
4.0( .157)
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
24.0( .945)
26.0(1.024)
28.0(1.102)
30.0(1.181)
5.8( .228)
7.8( .307)
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
PHR- 2
PHR- 3
PHR- 4
PHR- 5
PHR- 6
PHR- 7
PHR- 8
PHR- 9
PHR-10
PHR-11
PHR-12
PHR-13
PHR-14
PHR-15
PHR-16
4
9.8( .386)
B
A
5
11.8( .465)
13.8( .543)
15.8( .622)
17.8( .701)
19.8( .780)
21.8( .858)
23.8( .937)
25.8(1.016)
27.8(1.094)
29.8(1.173)
31.8(1.252)
33.8(1.331)
1.9
(.075)
6
7
Circuit
No.1
2.0
(.079)
4.5(.177)
8
9
10
11
12
13
14
15
16
0.6(.024)
Material and Finish
Nylon 66, UL94V-0, natural (white)
<For reference>
As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. PHR-2-oo-
(blank)…natural (white)
BK…black R…red TR…tomato red BL…blue Y…yellow
L…lemon yellow M…green D…orange N…brown
P…purple PK…pink H…gray LE…light blue
FY…vivid yellow
22
PH CO N N ECTO R
Through-hole type shrouded header –––––––––––––––––––––––––––––––––––––––––
The shrouded headers are interchangeable with those of the KR, KRD and CR insulation displacement connectors.
Q'ty / box
Model No.
Dimensions mm(in.)
Top entry type
(2 circuits)
Cir-
Top
entry
type
Side
entry
type
Top
entry
type
Side
entry
type
cuits
(3 circuits or more)
B
A
4.5(.177)
1.7(.067)
4.5(.177)
1.7(.067)
B
2
3
2.0( .079) 5.9( .232) 1,000
4.0( .157) 7.9( .311) 1,000
6.0( .236) 9.9( .390) 1,000
8.0( .315) 11.9( .469) 1,000
10.0( .394) 13.9( .547) 1,000
1,000
1,000
500
500
500
500
250
250
250
250
250
250
250
200
200
B 2B-PH-K-S
B 3B-PH-K-S
B 4B-PH-K-S
B 5B-PH-K-S
B 6B-PH-K-S
B 7B-PH-K-S
B 8B-PH-K-S
B 9B-PH-K-S
B10B-PH-K-S
B11B-PH-K-S
B12B-PH-K-S
B13B-PH-K-S
B14B-PH-K-S
B15B-PH-K-S
B16B-PH-K-S
S 2B-PH-K-S
S 3B-PH-K-S
S 4B-PH-K-S
S 5B-PH-K-S
S 6B-PH-K-S
S 7B-PH-K-S
S 8B-PH-K-S
S 9B-PH-K-S
S10B-PH-K-S
S11B-PH-K-S
S12B-PH-K-S
S13B-PH-K-S
S14B-PH-K-S
S15B-PH-K-S
S16B-PH-K-S
B
4
5
6
7
12.0( .472) 15.9( .626)
14.0( .551) 17.9( .705)
16.0( .630) 19.9( .783)
18.0( .709) 21.9( .862)
20.0( .787) 23.9( .941)
22.0( .866) 25.9(1.020)
24.0( .945) 27.9(1.098)
26.0(1.024) 29.9(1.177)
28.0(1.102) 31.9(1.256)
30.0(1.181) 33.9(1.335)
500
500
500
500
500
500
250
250
250
250
1.95
(.077)
0.5
(.020)
A
2.0
(.079)
0.5
(.020)
8
1.95
(.077)
Circuit
No.1
Circuit
No.1
A
9
10
11
12
13
14
15
16
Side entry type
4.8(.189)
1.7(.067)
B
2.0
0.5
(.020)
3.4
(.134)
(.079)
A
1.95
(.077)
Circuit
No.1
Material and Finish
Post: Brass, copper-undercoated, tin/lead-plated
Wafer: Nylon 66, UL94V-0, natural (white)
<For reference>
As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. B2B-PH-K-oo-
S…natural (white)
BK…black R…red TR…tomato red
E…blue Y…yellow L…lemon yellow M…green
D…orange N…brown P…purple PK…pink H…gray
LE…light blue FY…vivid yellow (blank)…ivory
23
PH CO N N ECTO R
Through-hole type shrouded header <Low insertion force type> –––––––––––––––––
Q'ty / box
Model No.
Dimensions mm(in.)
Top entry type
(2 circuits)
Cir-
Top
Side
entry
type
Top
entry
type
Side
entry
type
cuits
entry
type
A
B
(3 circuits or more)
4.5(.177)
4.5(.177)
1.7(.067)
2
3
2.0( .079)
4.0( .157)
6.0( .236)
5.9( .232)
7.9( .311)
9.9( .390)
1,000
1,000
1,000
1,000
1,000
500
1,000
1,000
500
500
500
500
250
250
250
250
250
250
250
200
200
B 2B-PH-KL S 2B-PH-KL
B 3B-PH-KL S 3B-PH-KL
B 4B-PH-KL S 4B-PH-KL
B 5B-PH-KL S 5B-PH-KL
B 6B-PH-KL S 6B-PH-KL
B 7B-PH-KL S 7B-PH-KL
B 8B-PH-KL S 8B-PH-KL
B 9B-PH-KL S 9B-PH-KL
B10B-PH-KL S10B-PH-KL
B11B-PH-KL S11B-PH-KL
B12B-PH-KL S12B-PH-KL
B13B-PH-KL S13B-PH-KL
B14B-PH-KL S14B-PH-KL
B15B-PH-KL S15B-PH-KL
B
1.7(.067)
B
4
5
8.0( .315) 11.9( .469)
10.0( .394) 13.9( .547)
12.0( .472) 15.9( .626)
14.0( .551) 17.9( .705)
16.0( .630) 19.9( .783)
18.0( .709) 21.9( .862)
20.0( .787) 23.9( .941)
22.0( .866) 25.9(1.020)
24.0( .945) 27.9(1.098)
26.0(1.024) 29.9(1.177)
28.0(1.102) 31.9(1.256)
30.0(1.181) 33.9(1.335)
6
7
1.95
(.077)
0.5
(.020)
A
8
500
2.0
(.079)
0.5
(.020)
Circuit
No.1
1.95
(.077)
Circuit
No.1
9
500
A
10
11
12
13
14
15
16
500
500
Side entry type
500
4.8(.189)
1.7(.067)
B
250
250
250
–
–
S16B-PH-KL
2.0
0.5
(.020)
3.4
(.134)
(.079)
A
1.95
(.077)
Circuit
No.1
Material and Finish
Post: Phosphor bronze, copper-undercoated, tin/lead-plated (reflow-treated)
Wafer: Nylon 66, UL94V-0, gray
<For reference>
As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. B2B-PH-KL-oo-
(blank)…gray
R…red E…blue S…natural (white)
Through-hole type PC board layout (viewed from soldering side) and Assembly layout –––
Top entry type
Side entry type
4.5
(.177)
2.0±0.05
(.079±.002) (.075)min.
1.9
2.0±0.05
(.079±.002) (.075)
1.9
min.
9.6(.378)
7.6(.299)
+0.1
0.7
0
+.004
+0.1
0
0.7
+.004
(.028 )dia.
0
(.028
)dia.
0
6.25
(.246)
Note:
1. Tolerances are non-cumulative: ±0.05mm(±.002") for all centers.
2. Hole dimensions differ according to the kind of printed circuit board and piercing method. If printed circuit boards made of hard material such as FR-4 are used,
the hole dimensions should be larger. The hole dimensions shown above are reference values.
Contact JST for details.
24
PH CO N N ECTO R
SMT type shrouded header –––––––––––––––––––––––––––––––––––––––––––––––––
•
The shrouded headers are interchangeable with those of the KR, KRD and CR insulation displacement connectors.
¨
•SMT type shrouded headers are not TUV approved.
Dimensions mm(in.)
Model No.
SM3 type
Q'ty /
reel
Cir-
cuits
B
Top entry
type
Side entry
type
Top entry type (with solder tabs)
A
Top entry type Side entry type
B
2
3
2.0( .079) 7.95( .313) 7.9( .311)
4.0( .157) 9.95( .392) 9.9( .390)
6.0( .236) 11.95( .470) 11.9( .469)
8.0( .315) 13.95( .549) 13.9( .547)
10.0( .394) 15.95( .628) 15.9( .626)
12.0( .472) 17.95( .707) 17.9( .705)
14.0( .551) 19.95( .785) 19.9( .783)
16.0( .630) 21.95( .864) 21.9( .862)
18.0( .709) 23.95( .943) 23.9( .941)
20.0( .787) 25.95(1.022) 25.9(1.020)
22.0( .866) 27.95(1.100) 27.9(1.098)
24.0( .945) 29.95(1.179) 29.9(1.177)
26.0(1.024) 31.95(1.258) 31.9(1.256)
28.0(1.102) 33.95(1.337) 33.9(1.335)
30.0(1.181) 35.95(1.415) 35.9(1.413)
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
B
B
B
B
B
B
B
B
2B-PH-SM3-TB
3B-PH-SM3-TB
4B-PH-SM3-TB
5B-PH-SM3-TB
6B-PH-SM3-TB
7B-PH-SM3-TB
8B-PH-SM3-TB
9B-PH-SM3-TB
S
S
S
S
S
S
S
S
2B-PH-SM3-TB
3B-PH-SM3-TB
4B-PH-SM3-TB
5B-PH-SM3-TB
6B-PH-SM3-TB
7B-PH-SM3-TB
8B-PH-SM3-TB
9B-PH-SM3-TB
2.975
(.117)
5.0
2.0
[
]
A
(.197) (.079)
2.0(.079)
1.9(.075)
4
5
6
7
8
9
1.4
2.2
(.087)
(.055)
10
11
12
13
14
15
16
B10B-PH-SM3-TB S10B-PH-SM3-TB
B11B-PH-SM3-TB
Circuit No.1
–
B12B-PH-SM3-TB S12B-PH-SM3-TB
B13B-PH-SM3-TB S13B-PH-SM3-TB
B14B-PH-SM3-TB S14B-PH-SM3-TB
B15B-PH-SM3-TB S15B-PH-SM3-TB
Side entry type
B16B-PH-SM3-TB
–
Material and Finish
Post: Copper alloy, copper-undercoated, tin/lead-plated
Wafer: Nylon 46, UL94V-0, natural (white)
Solder tab: Brass, copper-undercoated, tin/lead-plated
2.0
(.079)
1.6
(.063)
2.95
(.116)
2.6
(.102)
[
]
A
B
6.0(.236)
Note:
1. The products listed above are supplied on embossed-tape.
2. Contact JST for the top entry type headers with suction cap.
<For reference>
As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. B2B-PH-SM3-oo-TB
(blank)…natural (white)
R…red E…blue
25
PH CO N N ECTO R
Taping specifications of SM3 type shrouded headers –––––––––––––––––––––––––––
Feeding direction
Carrier tape
Feeding direction
Cover tape leader area
Tail tape
(Unloaded area)
40.0(1.575)min.
150.0
(5.906)min.
Connector
loaded area
Lead tape
2.5
1.0
W1+
-
[13.0(.512)dia.]
(Unloaded area)
2.0± 0.5
(.079±.020)
(W1+.098
)
-
.039
20 vacancies min.
Top entry type
(2 to 6 circuits)
Feeding direction
Top entry type
(7 to 16 circuits)
Feeding direction
1.55±0.05
(.061±.002)dia.
1.55±0.05
(.061±.002)dia.
4.0±0.1
(.157±.004)
2.0±0.1
(.079±.004)
0.38±0.05
(.015±.002)
4.0±0.1
(.157±.004)
2.0±0.1
(.079±.004)
0.38±0.05
(.015±.002)
Cover tape
Cover tape
Carrier tape
Carrier tape
12.0
±0.1
(.472±.004)
12.0
±0.1
(.472±.004)
Side entry type
Side entry type
(7 to 15 circuits)
Feeding direction
(2 to 6 circuits)
Feeding direction
1.55±0.05
1.55±0.05
(.061±.002)dia.
(.061±.002)dia.
4.0±0.1
(.157±.004)
2.0±0.1
(.079±.004)
0.38±0.05
(.015±.002)
4.0±0.1
(.157±.004)
2.0±0.1
(.079±.004)
0.38±0.05
(.015±.002)
Cover tape
Cover tape
Carrier tape
Carrier tape
12.0
±0.1
(.472±.004)
12.0
±0.1
(.472±.004)
Note:
Reel dimensions
mm(in.)
Taping dimensions mm(in.)
Q'ty /
reel
1. Specifications conform to JIS C 0806. The tape width, connector
loading recess square hole dimensions, etc. are determined by the
number of circuits and external shape of the connector to be loaded.
2. Specifications are subject to change without prior notice.
Circuits
F
S
–
W
W1
2 to 3
4 to 6
7.5( .295)
11.5( .453)
16.0( .630) 17.5( .689)
24.0( .945) 25.5(1.004)
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
–
Top entry
type
7 to 9
14.2( .559) 28.4(1.118) 32.0(1.260) 33.5(1.319)
20.2( .795) 40.4(1.591) 44.0(1.732) 45.5(1.791)
26.2(1.031) 52.4(2.063) 56.0(2.205) 57.5(2.264)
10 to 14
15 to 16
2 to 3
7.5( .295)
–
–
16.0( .630) 17.5( .689)
24.0( .945) 25.5(1.004)
4 to 6
11.5( .453)
Side entry
type
7 to 9
14.2( .559) 28.4(1.118) 32.0(1.260) 33.5(1.319)
20.2( .795) 40.4(1.591) 44.0(1.732) 45.5(1.791)
26.2(1.031) 52.4(2.063) 56.0(2.205) 57.5(2.264)
10 to 14
15
26
PH CO N N ECTO R
SMT type PC board layout (viewed from component side) and Assembly layout –––––––––
SM3 type
Top entry type
Side entry type
1.5±0.1
1.6±0.1 2.0±0.05
5.0(.197)
(.059±.004) (.063±.004) (.079±.002)
1.6±0.1
1.6±0.1 2.0±0.05
(.063±.004) (.063±.004) (.079±.002)
End face of wafer
on the mating side
End face of wafer
on the mating side
9.6(.378) 1.0(.039)
7.6(.299)
1.0
(.039)
1.0
(.039)
min.
min.
Note:
1. Tolerances are non-cumulative: ±0.05mm(±.002" ) for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
Applicator for the semi-automatic press AP-K2N –––––––––––––––––––––––––––––––
Crimp applicator MKS-L(-10)
Compact crimp applicator MKS-LS
Strip-crimp applicator MKS-SC
with safety cover
Contact
with safety cover
without safety cover
APLNC SPH002-05S
APLNC SPH004-05S
with safety cover
without safety cover
APLMK SPH002-05S
APLMK SPH004-05S
APLMKLS SPH002-05S
APLLSNC SPH002-05S
APLSC SPH002-05S
SPH-002T-P0.5S
SPH-004T-P0.5S
–
–
APLSC SPH004-05S
27
相关型号:
©2020 ICPDF网 联系我们和版权申明