BB-852-10141 [ETC]
ACCESSCONVERTER, TX/3 + FX-MM130;
| 型号： | BB-852-10141 |
| 厂家： | 
ETC |
| 描述： | ACCESSCONVERTER, TX/3 + FX-MM130 |
| 文件： | 总2页 (文件大小：617K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Multi-Port, 10/100 Mbps Switching
Standalone Media Converter
AccessConverter series
www.advantech-bb.com
PRODUCT FEATURES
•
Low cost, high flexibility – same small unit performs media conversion
and switching functions
•
•
•
External AC power adapter included
Compact size allows for flexible installation configurations
Unmanaged, plug-and-play 10/100 copper to 100Mbps fiber
Terminating a fiber run while using various local, copper-based devices such as
PCs, printers, VoIP, etc. is essential for the success of Fiber-to-the-Business,
Curb and other FTTx projects. Remote locations have similar configuration
demands. Connecting the multiple copper devices to the fiber, however, typically
requires the use of both a media converter and a switch – meaning two pieces
of equipment to purchase and two pieces of equipment to monitor and maintain.
The AccessConverter provides (3) 10/100Mbps copper ports and (1) 100Mbps
fiber port for various fiber types.
ORDERING INFORMATION
MODEL
FIBER
ETHERNET
PORTS
ETHERNET
NUMBER
FIBER
PORTS RANGE
CONNECTOR
AccessConverter
852-10150
852-10151
852-10141
852-10142
852-10143
852-10144
MM850-ST
1
1
1
1
1
1
2 km
2 km
3
3
3
3
3
3
RJ45
RJ45
RJ45
RJ45
RJ45
RJ45
MM850-SC
MM1300-ST
5 km
MM1300-SC
5 km
Best of all, one compact AccessConverter module reduces the amount of
required equipment while providing all the features of a switch (store and
forward switching mechanics, MAC address learning, protection against
broadcast storms, flow control, etc.) and performing the electrical-to-optical
conversion. In addition, the unit’s small size and wall-mount bracket (included)
allow you to install AccessConverter virtually anywhere, including inside a
network interface device (NID).
SM1310/PLUS-ST
SM1310/PLUS-SC
40 km
40 km
All product specifications are subject to change without notice.
AccessConverter_4517ds
orders@advantech-bb.com
support@advantech-bb.com
Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
Multi-Port, 10/100 Mbps Switching
Standalone Media Converter
AccessConverter series
SPECIFICATIONS
TECHNICAL
MECHANICAL
Auto Negotiation of speed and duplex (HDX/FDX) on copper ports
Layer 2 packet switching, store and forward operation
Forwarding Rate: 14,881pps for 10 Mbps; 148,810pps for 100 Mbps
1024 MAC address learning
Dimensions
2.34H x 8.89W x 11.13D cm (0.92H x 3.50W x 4.38D in)
0.50 kg (1.1 lb)
Shipping Weight
POWER RATING
5V DC, 1A
MTU: Supports over-sized packets up to 1536 bytes
Full-wire speed on all ports
Broadcast storm protection
AutoCross for MDI/MDIX
LinkLoss and FiberAlert
ENVIRONMENTAL
Operating Temperature
Storage Temperature
Operating Humidity
REGULATORY APPROVALS
FCC Class B
0 to +50 °C (+32 to +122 °F)
-25 to +70 °C (-13 to +158 °F)
5 to 95% (non-condensing)
Auto Negotiation
Diagnostic LEDs
UL/cUL, CSA, CE
50/125µm or 62.5/125µm multi-mode fiber
9/125µm single-mode fiber
Single-strand fiber
All copper version also available (TX/3 + TX)
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3u 100Base-FX
IEEE 802.3x Flow Control
CONNECTORS
RJ45, ST, SC
Supports half-duplex and full-duplex operation
MECHANICAL DIAGRAM
Units = inches
.25
3.50
2X, .63
.41
2.21
4.00
.37
.95
.07
orders@advantech-bb.com
support@advantech-bb.com
Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
相关型号：
©2020 ICPDF网 联系我们和版权申明