BC01B-URT-TR [ETC]
Single Chip Bluetooth Device; 单芯片蓝牙设备
| 型号： | BC01B-URT-TR |
| 厂家： | 
ETC |
| 描述： | Single Chip Bluetooth Device |
| 文件： | 总15页 (文件大小：225K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Product Data Sheet
TM
Device Features
Compliant to Bluetooth specification V1.1
BlueCore 01b
TM
Single Chip Bluetooth Device
Small footprint in 8mm x 8mm 81-ball BGA
Product Data Sheet For:
BC01b-USB
Fully integrated RF block with no external
adjustments or trim
(USB and UART version)
(BGA Packaging)
USB V1.1 compliant
BC01b-URT
(UART only version)
(BGA Packaging)
Qualified Bluetooth firmware included
Extensive built-in-self-test to minimise end
product final test time
BC01bv-USB
(USB and UART version)
(VFBGA Packaging)
RF reference designs available
Low power consumption/optimisation
Support for up to 7 slaves
BC01bv-URT
(UART only version)
(VFBGA Packaging)
General Description
Applications
TM
BlueCore01b is a single chip radio and baseband IC
Laptop and desktop PCs
Mobile Phones
Cordless Headsets
TM
for Bluetooth 2.4GHz radios, and is implemented in
CMOS technology.
When used with external flash containing the CSR
Bluetooth software stack, it provides a fully compliant
Bluetooth system for data and voice communications.
Personal Digital Assistants (PDAs)
Computer Accessories (Compact Flash,
PCMCIA and SD cards)
Domestic and industrial appliances
SPI
RAM
UART/USB
The design is optimised to require very few external
RF components to facilitate rapid design of the applica-
tion printed wiring board, and therefore the fastest pos-
sible time to market and lowest overall cost.
A low intermediate frequency receiver is utilised to
allow on-chip channel filtering. All hardware is fully
compliant with the Bluetooth specification.
RF IN
RF OUT
2.4GHz
Radio
DSP
I/O
PIO
µP
PCM
The device operates from a regulated supply in the
range 2.7V to 3.3V and is available in an 81-ball BGA
package.
XTAL
EXTERNAL
FLASH
Figure 1: BlueCore01b Block Diagram
bc01b-ds-003d
Production Information
Key Features
Product Data Sheet
Key Features
Baseband
Radio
All packet types supported. Piconet and
Qualified Bluetooth component
Scatternet support
Extensive built-in-self-test to minimise end
product final test time
Multiple physical application interfaces:
No external trimming required in production
Full RF reference designs available
-1
Data and voice to 1.5Mbs
UART:
PCM:
Programmable, for voice: 13-bit
8kss synchronous bi-directional
-1
Transmitter
Up to 2dBm output power for Class 2
operation
serial audio interface
Data and voice. V1.1 Compliant.
USB:
Supports OHCI and UHCI
Support for external PA for Class 1 operation
with level control and RSSI >30dB dynamic
range
Trancoders for A-law, µ-law and CVSD for
HCI voice traffic
Support for up to seven slaves
Receiver
Firmware
High out-of-band blocking immunity,
Link Controller, Link manager and HCI
sufficient for embedding into mobile phones
Optional build includes embedded L2CAP,
RFCOMM and Service Discovery
Integrated channel filters
Extensive power saving modes, including
PARK, HOLD and SNIFF
Digital demodulator for superior co-channel
rejection
Ancillary Features
Synthesiser
Fully integrated; no external VCO varactor
diode or resonator
Internal low-dropout regulator with low stand-
by current (uses one external transistor)
Crystal oscillator with digital trimming allows
use of low cost reference crystal
Power-On-Reset
Closed loop during TX burst resulting in no
carrier drift
Page 2 of 15
bc01b-ds-003d
Production Information
Product Data Sheet
Device Diagram
Device Diagram
Figure 2: BlueCore01b Device Diagram
bc01b-ds-003d
Page 3 of 15
Production Information
Device Pinout Diagram
Product Data Sheet
Device Pinout Diagram
Orientation from top of device
1
2
3
4
5
6
7
8
9
UART_RTS /
USB_D+
A
B
C
D
E
F
VSS_PADS
VDD_PADS
UART_TX
VDD_MEM
VSS_MEM
WEB
A[0]
A[1]
PIO[3] /
USB_
PIO[4] /
UART_CTS /
USB_D-
UART_RX
SPI_MISO
SPI_CLK
PCM_SYNC
PCM_IN
PCM_CLK
NC
A[6]
D[15]
A[12]
D[13]
D[12]
D[7]
A[3]
A[9]
A[4]
A[7]
A[2]
A[5]
A[8]
A[14]
CSB
REB
D[0]
D[1]
USB_ON
WAKE_UP
PIO[2] /
USB_PULL_
UP
RESET
TX_PWR
RF_IN
SPI_MOSI
SPI_CSB
SCAN_EN
PIO[0] /
RXEN
A[11]
A[15]
D[10]
D[9]
A[10]
A[13]
A[17]
A[16]
D[3]
VSS_RADIO
VSS_RADIO
VDD_RADIO
PCM_OUT
PIO[5] /
USB_
PIO[1] /
TXEN
TX_B
D[11]
DETACH
TX_A
PIO[6]
TEST_B
PIO[7]
VDD_CORE
XTAL_IN
D[14]
G
H
J
LOOP_
FILTER
VSS_VCO
VDD_VCO
VSS_CORE
VREG
D[6]
D[4]
TEST_A
XTAL_OUT
D[8]
D[5]
D[2]
Note: NC = Do not connect
Figure 3: BlueCore01b Device Pinout
Page 4 of 15
bc01b-ds-003d
Production Information
Product Data Sheet
Device Terminal Functions
Device Terminal Functions
Terminal Name
Pad Type
Ball Description
Radio
RF_IN
TX_A
-
-
-
E1
G1
F1
Receiver RF input
Transmitter RF output
Transmitter RF output (complement of TX_A)
TX_B
Bidirectional
pulled down
Control output for external switch or LNA
(if fitted)
PIO[0] / RXEN
D2
Bidirectional
pulled down
PIO[1] / TXEN
TX_PWR
F3
D1
Control output for external switch or PA (if fitted)
Current DAC output to set external PA level
Current DAC
Synthesiser and Oscillator
XTAL_IN
XTAL_OUT
-
-
-
J4
J3
H2
Sense for crystal or external clock input
Drive for crystal
Synthesiser external loop filter
LOOP_FILTER
External Memory Port
A[17:0]
D[15:0]
(1)
(1)
CMOS output
Bidirectional
Address bus for external memory
Data bus for external memory
WEB
REB
CSB
CMOS output
CMOS output
CMOS output
A7
G9
F9
Write Enable for external memory (active low)
Read Enable for external memory (active low)
Chip Select for external memory (active low)
PCM Interface
Bidirectional
pulled down
PCM_SYNC
B5
D5
Synchronous data strobe
Synchronous data clock
Bidirectional
pulled down
PCM_CLK
CMOS input
pulled down
Synchronous 8kss-1 data input
PCM_IN
C5
E3
-1
PCM_OUT
CMOS output
Synchronous 8kss data output
Note:
(1)
See Address and Data Bus tables at the end of this section.
Page 5 of 15
bc01b-ds-003d
Production Information
Device Terminal Functions (continued)
Ball Description
Product Data Sheet
Terminal Name
Pad Type
(1)
UART or USB
UART_TX
CMOS output
A3
B3
UART data output
UART data input
CMOS input, 5V tolerant
pulled down
UART_RX
UART_RTS / USB_D+
UART_CTS / USB_D-
CMOS output
CMOS input
A4
B4
UART Ready To Send / USB D+
UART Clear To Send / USB D-
Bidirectional
pulled down
PIO[2] / USB_PULL_UP
PIO[3] / USB_WAKE_UP
PIO[4] / USB_ON
C2
B1
B2
F4
USB Pull-Up (via 1.5kΩ resistor to D+)
Bidirectional
pulled down
Output goes high to wake up PC when in USB
mode
Bidirectional
pulled down
USB On (input senses when VBUS is high,
wakes BlueCore01b)
Bidirectional
pulled down
PIO[5] / USB_DETACH
Test and Debug
SPI_CSB
Chip detaches from USB when this line is high
CMOS input, 5V tolerant
pulled up
D4
D3
C4
SPI Chip Select
SPI Clock
CMOS input, 5V tolerant
pulled down
SPI_CLK
CMOS input, 5V tolerant
pulled down
SPI_MOSI
SPI Data Input
SPI_MISO
TEST_A
TEST_B
CMOS output Tristate
C3
J2
H3
SPI Data Output
Analog test port A
Analog test port B
-
-
CMOS input with weak
internal pull-down
RESET
C1
E4
Reset
CMOS input with weak
internal pull-down
SCAN_EN
For test purposes only (leave unconnected)
PIO Port
PIO[0] /RXEN
Bidirectional
pulled down
D2
F3
C2
B1
B2
F4
G3
G4
Input/Output port or high when RX is enabled
Input/Output port or high when TX is enabled
Input/Output port or USB
Bidirectional
pulled down
PIO[1] /TXEN
Bidirectional
pulled down
PIO[2] /USB_PULL_UP
PIO[3] /USB_WAKE_UP
PIO[4] /USB_ON
PIO[5] /USB_DETACH
PIO[6]
Bidirectional
pulled down
Input/Output port or USB
Bidirectional
pulled down
Input/Output port or USB
Bidirectional
pulled down
Input/Output port or USB
Bidirectional
pulled down
Input/Output port
Bidirectional
pulled down
PIO[7]
Input/Output port
Note:
(1)
BC01b-USB supports both USB and UART (but not simultaneous operation). BC01b-URT supports UART only.
Page 6 of 15
bc01b-ds-003d
Production Information
Product Data Sheet
Device Terminal Functions (continued)
Ball Description
Terminal Name
Pad Type
Power Supplies and Control
LDO voltage regulator output to external pass
VREG
-
J5
transistor
VDD_CORE
VDD_RADIO
VDD_VCO
VDD_PADS
VDD_MEM
VSS_CORE
VSS_RADIO
VSS_VCO
VDD
VDD
VDD
VDD
VDD
VSS
VSS
VSS
VSS
VSS
H4
G2
J1
A2
A5
H5
For internal digital circuitry
For RF circuitry
For VCO and synthesiser
For all Input/Output except memory port
For external memory port
For internal digital circuitry
F2, E2 For RF circuitry
H1
A1
A6
For VCO and synthesiser
For Input/Output except memory port
For external memory port
VSS_PADS
VSS_MEM
Address Lines
Terminal
Data Bus
Ball
Terminal
Ball
H9
J9
D[0]
D[1]
A[0]
A[1]
A8
A9
B9
B7
B8
C9
B6
C8
D9
C7
D8
D7
D6
E8
E9
E7
G8
F8
D[2]
D[3]
D[4]
D[5]
D[6]
D[7]
D[8]
D[9]
D[10]
D[11]
D[12]
D[13]
D[14]
D[15]
J8
A[2]
A[3]
A[4]
A[5]
A[6]
A[7]
A[8]
A[9]
A[10]
A[11]
A[12]
A[13]
A[14]
A[15]
A[16]
A[17]
H8
H7
J7
H6
G6
J6
G7
F7
F5
F6
E6
G5
C6
Page 7 of 15
bc01b-ds-003d
Production Information
Product Data Sheet
Electrical Characteristics
Max
Electrical Characteristics
Absolute Maximum Ratings
Rating
Min
°
°
Storage Temperature
-30 C
85 C
Supply Voltage, VDD
Other Terminal Voltages (except 5V tolerant)
5V Tolerant Terminals
-0.4V
VSS-0.4V
-0.4V
3.6V
VDD+0.4V
5.5V
Recommended Operating Conditions
Min
Max
Operating Condition
°
(1)
°
(1)
Temperature
-20 C
70 C
(2)
Supply Voltage, all VDD terminals
Supply Voltage, VDD_PADS for USB operation
Difference between any two VDD terminals
2.7V
3.0V
-
3.3V
3.4V
0.3V
Notes:
(1)
The device is fully functional across this range.
(1)
The guaranteed radio performance is shown in the Radio Characteristics section.
2
(
)
The recommended supply voltage is 3.3V (to be compatible with industry standard regulators) but
the device will function up to 3.4V.
(2)
Input/Output Terminal Characteristics
VDD = 3.0V (except as specified)
Min
Typ
Max
Unit
Digital Terminals
Input voltage
VIL input logic level low
VIH input logic level high
-0.4
-
-
V
V
0.3V x VDD
VDD+0.4
0.7VDD
Input current
CMOS input only
-1
-
-
-
1
1
µA
µA
µA
(VI = 0V or VI =3.3V, VDD = 3.3V)
CMOS input + pull-up
(VI = 0V, VDD =3.3V)
CMOS input + pull-down
(VI =3.3V, VDD =3.3V)
-20
-125
(1)
(1)
20/2
125/12.5
Output voltage
VOL output logic level low
(IO = 4.0mA)
-
-
-
0.2
-
V
V
VOH output logic level high
(IO = -4.0mA)
VDD-0.2
Tristate leakage current
-1
-
-
1
µA
CI Input capacitance
2.5
10
pF
Note:
(1)
PIO terminals have weak pull-down resistors (1/10th current of standard pull-down resistors).
Page 8 of 15
bc01b-ds-003d
Production Information
Product Data Sheet
Electrical Characteristics (continued)
Input/Output Terminal Characteristics (continued)
Power-on Reset
Min
Typ
Max
Unit
VDD falling threshold
VDD rising threshold
Hysteresis
2.30
2.50
180
2.40
2.60
200
2.50
2.70
220
V
V
mV
USB Terminals
Min
Typ
Max
Unit
Input threshold
VIL input logic level low
VIH input logic level high
-
-
-
0.3VDD_PADS
-
V
V
0.7VDD_PADS
Input leakage current
CI Input capacitance
-1
-
-
1
µA
2.5
10
pF
Output levels to correctly terminated USB cable
VOL input logic level low
VOH input logic level high
0
-
-
0.2
V
V
2.8
VDD_PADS
Voltage Regulator (VREG)
Output regulation voltage
Min
Typ
Max
Unit
(1)
2.74
2.79
2.84
V
3.1
3.15
3.2
V
-
5
-
-
-
-
5
-
V
Maximum allowable voltage on Vreg pad
Bias current
µA
mA
100
Maximum regulation current
Note:
(1)
The regulated voltage is selected by a variable stored in the flash ROM.
(1)
Power Consumption
°
VDD = 3.0V Temperature = 20 C
Mode
Avg
41
42
78
77
29
81
82
-
5.5
1.1
1.1
90
Peak
Unit
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
µA
SCO connection HV3 (1s interval sniff mode) (Slave)
SCO connection HV3 (1s interval sniff mode) (Master)
SCO connection HV1 (Slave)
-
-
-
-
-
-
-
SCO connection HV1 (Master)
ACL data transfer 115.2kbps UART (Master)
ACL data transfer 720kbps USB (Slave)
ACL data transfer 720kbps USB (Master)
Peak current during RF burst
ACL connection, Sniff Mode 40ms interval, 38.4kbps UART
ACL connection, Sniff Mode 1.28s interval, 38.4kbps UART
Parked Slave, 1.28s beacon interval, 38.4kbps UART
Deep Sleep Mode
135
-
-
-
Note:
(1)
Power consumption is for BC01b-USB module including external flash ROM.
Page 9 of 15
bc01b-ds-003d
Production Information
Electrical Characteristics (continued)
Product Data Sheet
°
Radio Characteristics at 20 C
VDD = 3.0V f=2.45GHz
Bluetooth
Min Typ Max
Unit
Receiver
Specification
(1)
-
-
-
-79
-89
-5
-75
-70
-70
-20
11
0
-30
-40
-9
-39
-
dBm
dBm
dBm
dB
dB
dB
dB
dB
dBm
dBm
Sensitivity at 0.1% BER
(1)
-
Sensitivity at 0.1% BER with additional off-chip LNA
(1)
Maximum received signal
C/I co-channel
Adjacent channel selectivity C/I 1MHz
2nd adjacent channel selectivity C/I 2MHz
3rd adjacent channel selectivity C/I >3MHz
Image rejection C/I
Maximum level of intermodulation interferers
1dB compression point at 1.9GHz
-
(1)
-
-
-
-
-
-
-
9
-2
-
-
-
-
-
-
-
(1)
(1)
-34
-45
-14
-30
-12
(1) (2)
(1) (3)
(1) (4)
Bluetooth
Min Typ Max
Unit
Transmitter
RF transmit power
RF power control range
RF power range control resolution
Specification
(1)
-2
-
2
30
2
6
-
-6 to +4
16
dBm
dB
dB
(1)
-
-
-
20dB bandwidth for modulated carrier
-
-
-
885
-47
-52
-
-
-
1000
-20
-40
kHz
dBc
dBc
(1)
2nd adjacent channel transmit power
(1)
3rd adjacent channel transmit power
°
Radio Characteristics at 50 C
VDD = 3.0V f=2.45GHz
Bluetooth
Min Typ Max
Unit
Receiver
Specification
(1)
Sensitivity at 0.1% BER
-
-
-74
-88
-70
-
-70
-70
dBm
dBm
(1)
Sensitivity at 0.1% BER with additional off-chip LNA
Bluetooth
Min Typ Max
Unit
Transmitter
Specification
(1)
RF transmit power
-5
-1
-6 to +4
dBm
3
Notes:
(1)
Measured according to the Bluetooth specification.
(2)
Up to five spurious responses within Bluetooth limits are allowed.
At carrier -3MHz.
(3)
(4)
Measured at f1-f2=5MHz.
These results were measured on the BlueCore01b chip. Results shown relate to power at the output
of the balun and at the input to the RX matching network. The loss of the RF filter and switch in the
application circuit are not taken into account.
BlueCore01b meets the Bluetooth specification when used in a suitable application circuit between
-20°C and 50°C. When used with an off-chip LNA the sensitivity can be enhanced and the operating
temperature range extended.
Page 10 of 15
bc01b-ds-003d
Production Information
Product Data Sheet
Package Dimensions
Package Dimensions
Top View
Bottom View
D
D1
PIN A1
8X e
PIN A1
A
A
B
C
B
C
D
E
D
E
F
G
H
J
F
G
H
J
81X b
1
9
8
7
6
5
4
3
2
1
1
2
3
4
5
6
7
8
9
DETAIL K
3
0.1
Z
Z
(A3)
(A2)
A
A1
SEE DETAIL K
MAX
0.1
Z
2
SEATING
PLANE
DIM
MIN
NOTES
A
A1
A2
A3
b
1.1
1.50
0.35
1
2
3
DIMENSION b IS MEASURED AT THE MAXIMUM
SOLDER BALL DIAMETER PARALLEL TO DATUM
PLANE Z.
0.25
0.36 REF
0.8 REF
0.45
DATUM Z IS DEFINED BY THE SPHERICAL
CROWNS OF THE SOLDER BALLS.
0.35
D
8 BSC
PARALLELISM MEASUREMENT SHALL EXCLUDE
ANY EFFECT OF MARK ON TOP SURFACE OF
PACKAGE.
E
e
8 BSC
0.8 BSC
D1
E1
6.4 BSC
6.4 BSC
UNIT
BC01b-USB/URT BGA 81 BALLS
8X8X1 PKG PITCH POD
(JEDEC MO-225-A)
MM
DIM
MIN
MAX
NOTES
A
A1
A2
A3
b
0.8
1
1
2
3
DIMENSION b IS MEASURED AT THE MAXIMUM
SOLDER BALL DIAMETER PARALLEL TO DATUM
PLANE Z.
0.25
0.35
0.22 REF
0.45 REF
DATUM Z IS DEFINED BY THE SPHERICAL
CROWNS OF THE SOLDER BALLS.
0.35
0.45
D
8 BSC
PARALLELISM MEASUREMENT SHALL EXCLUDE
ANY EFFECT OF MARK ON TOP SURFACE OF
PACKAGE.
E
e
8 BSC
0.8 BSC
D1
E1
6.4 BSC
6.4 BSC
UNIT
BC01bv-USB/URT VFBGA 81 BALLS
8X8X1 PKG PITCH POD
MM
(JEDEC MO-225-A)
Figure 4: BlueCore01b package dimensions
bc01b-ds-003d
Page 11 of 15
Production Information
Assembly Guidelines
Product Data Sheet
Assembly Guidelines
Figures 5 and 6 show the re-flow solder profile that was used to qualify the BlueCore01b packages.
This temperature profile was repeated three times during the qualification of the BlueCore01b packages with a
maximum temperature of 235°C.
250
200
150
100
50
0
0
2
4
Time in minutes
Figure 5: Re-flow solder profile 1
Whereas the above profile was used to confirm the reliablility of the BlueCore01b packages, the following
(figure 6) is the recommended solder profile to use when assembling BlueCore01b onto a circuit board.
Recommended Solder Profile
Initial Ramp: 60°C to 120°C/minute to 140°C to 150°C equilibrium 90°C to 120°C/minute ramp to 210°C to 220°C
maximum temperature. Time over liquidus should be 45 to 90 seconds. Rapid quenching provides superior
cosmetic appearance and bond strength.
250
200
150
100
50
0
0
2
4
Time in minutes
Figure 6: Re-flow solder profile 2
bco1b-ds-003d
Page 12 of 15
Production Information
Product Data Sheet
Ordering and Contact Information
Ordering and Contact Information
Order Number
BC01b-USB-TR
BC01b-USB
BC01b-URT-TR
BC01b-URT
Interface Version
Shipment Method
Tape and reel
Tray (dry pack)
Tape and reel
USB and UART
USB and UART
UART only
UART only
Tray (dry pack)
BC01bv-USB-TR
BC01bv-USB
BC01bv-URT-TR
BC01bv-URT
USB and UART
USB and UART
UART only
Tape and reel
Tray (dry pack)
Tape and reel
UART only
Tray (dry pack)
Contact CSR Worldwide
CSR Japan
CSR KK
CSR USA
1651 N. Collins Blvd.
Suite 210
CSR Head Office
Unit 300, Cambridge Science Park
Milton Road
Miyasaka LK Building 3F
43-23, 3 Chome Shimorenjaku
Mitaka-shi, Tokyo
Richardson
Cambridge, CB4 0XL
United Kingdom
TX75080
USA
Japan 181-0013
Tel: +44 (0) 1223 424 167
Fax: +44 (0) 1223 424 178
e-mail: sales@csr.com
Tel: +1 972 238 2300
Fax: +1 972 231 1440
e-mail: sales@csr.com
Tel: +81 (0) 422 40 4760
Fax: +81 (0) 422 40 4765
e-mail: sales@csr.com
CSR Singapore
Blk 5, Ang Mo Kio
Industrial Park 2A
AMK Tech II, #07-08
Singapore 567760
Tel: +65 484 2212
Fax: +65 484 2219
e-mail: sales@csr.com
CSR Denmark
Novi Science Park
Niels Jernes Vej 10
9220 Aalborg East
Denmark
Tel: +45 72 200 380
Fax: +45 96 354 599
e-mail: sales@csr.com
To contact a CSR representative, please go to www.csr.com/contacts.htm
bco1b-ds-003d
Page 13 of 15
Production Information
Product Data Sheet
Status of Information
Status of Information
bc01b-ds-003d
BlueCore01b Product Data Sheet
July 2001
Advance Information
Information for designers on the target specification for a CSR product now in development.
All detailed specifications including pinouts and electrical specifications may be changed by CSR without
notice.
Pre-Production Information
Final pinout and mechanical dimensions. All electrical specifications can be changed by CSR without notice.
Production Information
Final data sheet including the guaranteed minimum and maximum limits for the electrical specifications.
Production datasheets supersede all previous versions.
Life Support Policy and Use in Safety-Critical Applications
CSR’s products are not authorised for use in life-support or safety-critical applications.
Trademarks, Patents and Licenses
BlueCore is a trademark of CSR.
Bluetooth and the Bluetooth logos are trademarks owned by Bluetooth SIG Inc, USA and licensed to CSR.
All other product, service, and company names are trademarks, registered trademarks, or service marks of their respective owners.
The publishing of this information does not imply that any license is granted under any patent or other rights owned by CSR.
CSR reserves the right to make technical changes to its products as part of its development programme.
While every care has been taken to ensure the accuracy of the contents of this document, CSR cannot accept responsibility for any errors.
CSR Ltd 2001
This is the product overview version of the BlueCore01b data sheet. The long form version is available
separately from CSR.
Page 14 of 15
bco1b-ds-003d
Production Information
Product Data Sheet
Record of Changes
Record of Changes
Date:
21st Feburary 2001
23rd March 2001
Revision:
bc01b-ds-003a
bc01b-ds-003b
Reason for Change:
Input/Output terminal characteristics information updated
Minor modifications to RF characteristics based upon
latest characterisation data
System features added and power consumption figures
expanded
6th July 2001
26th July 2001
bc01b-ds-003c
bc01b-ds-003d
Package dimensions added for bc01bv VFBGA packaging
BlueCore01b Product Data Sheet
bc01b-ds-003d
July 2001
Page 15 of 15
bco1b-ds-003d
Production Information
相关型号：
BC04-11CGKWA
Smart/Normal 7 Seg Numeric LED Display, Green, 10.2mm, ROHS COMPLIANT PACKAGE-24
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明