BL02RN1R3N1A [ETC]
On-Board Type (DC) EMI Suppression Filters; 电路板插件式(直流)EMI静噪滤波器型号: | BL02RN1R3N1A |
厂家: | ETC |
描述: | On-Board Type (DC) EMI Suppression Filters |
文件: | 总163页 (文件大小:2784K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
EMIFILr, EMIGUARDr, "EMIFIL" and "EMIGUARD" in this catalog are
CONTENTS
the trademarks of Murata Manufacturing Co., Ltd.
Selection Guide of EMI Filters
2
3
6
Products Guide / Effective Frequency Range
Outlines of EMI Suppression Filter (EMIFILr) for DC Line
Chip Ferrite Beads Part Numbering / Impedance Map / BLM Series Line Up
12
1
1
2
3
4
5
6
BLM03A/15A/18A/21A/31A/41A
BLM15B/18B/21B/31B
BLM18R/21R
18
For GHz Range Noise Suppression BLM18H/18E
53
60
27 Array Type BLA2AA/2AB/31A/31B
41
45
BLM18P/21P/31P/41P
Chip EMIFILr Part Numbering
66
2
3
4
5
Capacitor Type NFM18C/21C/3DC/41C
Capacitor Array NFA31C
70
74 LC Combined Winding Type NFW31S
75
79 For Large Current NFM18P/21P/3DP/41P
LC Combined Monolithic Type NFL18ST/18SP/21SP
81
84
86
89
RC Combined Type NFR21G
LC Combined Type for Large Current NFE31P/61P/61H
RC Combined Array Type NFA31G
Chip EMIGUARDr (EMIFILr with Varistor Function) Part Numbering
VFM41R 94
93
Chip Common Mode Choke Coils Part Numbering
96
Film Type DLP11S/DLP31S
Film Type Array DLP31D
Monolithic Type DLM2HG
97 Winding Type DLW21S/DLW21H/DLW31S
101
104
99
Winding Type for Large Current DLW5AH/DLW5BS
100
Lead Type EMI Suppression Filters (EMIFILr)
Ferrite Beads Inductors Part Numbering
Block Type EMIFILr
BL01/BL02/BL03
105
BNX
125
127
Disc Type EMIFILr Part Numbering
DSp6/Broad Band DSp9N/Heavy-duty Type DSp9H
Common Mode Choke Coils Part Numbering
PLT09H
109
EMIGUARDr (EMIFILr with Varistor Function) Part Numbering
VFR3V/VFS6V/VFS9V
117
Microwave Absorbers Part Numbering
129
6
EA10/EA20/EA21
130
!Caution / Notice
132
134
143
147
152
157
161
Soldering and Mounting
Packaging
Chip EMI Suppression Filter Design Kits
Outlines of Major Noise Regulation Standards
Noise Suppression Principles by DC EMIFILr
Murata EMI Filter Selection Simulator
Recycled Paper
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Selection Guide of EMI Filters
Headphone Line
Start
Common Mode Choke Coils
1008
Type of Circuit
DLM2HG
600Ω
DC Power Line
High Speed Signal Line
General Signal Line
Ground Condition
Ground Condition
Signal Freq. and Noise
Poor
Good
Poor
Good
Separate
Mixed
Common Mode
Choke Coils
Chip Ferrite Beads
3-terminal Capacitors
Chip Ferrite Beads
3-terminal Capacitors
Chip Ferrite Beads
3-terminal Capacitors
Capacitor Type
Capacitor Type
Combined LC T Filter
0201
0603
0603
0603
0402
0603
0504
BLM03A
NFM18C
BLM18P
NFM18P
BLM15B
NFL18ST
DLP11S
10–120Ω
22–22000pF
0.5–3A
2A
5–1000Ω
100–500MHz
90–200Ω
0402
0805
0805
0805
0603
1206
Combined LC Filter
0603
BLM15A
NFM21C
BLM21P
NFM21P
BLM18B
DLP31S
10–1000Ω
22–22000pF
1.5–6A
2–4A
5–2500Ω
120–550Ω
NFL18SP
1206
1806
0603
1205
0603
0805
150–500MHz
0805
BLM31P
NFM41P
BLM18A/R
NFM3DC
BLM18HD/HB
DLW21S
1.5–6A
2A
120–1000Ω
22–22000pF
120–1000Ω
67–370Ω
NFL21S
0603
1806
0805
0805
20–500MHz
Combined LC T Filter
Capacitor Array
1206
1206
1206
BLM18HG/HK/EG
BLM41P
BLM21B
DLW21H
100–1000Ω
1–6A
5–2700Ω
67–180Ω
NFA31C
NFE31P
NFW31S
0805
22–22000pF
1206
6A
10–500MHz
Arrays
2706
0804
Combined RC Filter
Combined LC T Filter
0805
BLM21A/R
1206
DLW31S
120–1000Ω
90–2200Ω
NFE61P
BLA2AB
10–1000Ω
NFR21G
22–100Ω
10–100pF
2020/2014
2A
Arrays
NFE31P
22–2200pF
0804
1206
Common Mode Choke Coils
Combined RC Array
DLW5BS(AH)
2706
2020/2014
190–4000Ω
1206
BLA2AA
BLA31B
120–1000Ω
120–1000Ω
Arrays
NFE61P
33–4700pF
DLW5BS(AH)
NFA31G
6.8–100Ω
1206
1206
0.2–5A
190–4000Ω
10–100pF
BLA31A
DLP31D
30–1000Ω
90–440Ω
Dimensions in inches
High Current EMI Filters
Standard EMI Filters
EMI Filters for High Speed Signal Lines
Impedance is typical value at 100MHz.
2
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Products Guide/Effective Frequency Range
Product Guide
Dimensions
Effective Frequency Range
Type
Series
(mm)
EIA Code
10kHz 100kHz 1MHz 10MHz100MHz 1GHz 10GHz
Inductor
Type
For Digital
1.6
2.0
0.6
1.0
1.6
BLM18R
0603
0.8
1.25
0.3
0.5
0.8
Interfaces
Standard
BLM21R
BLM03A
BLM15A
BLM18A
BLM21A
BLM31A
BLM41A
0805
0201
0402
0603
0805
1206
1806
0804
1206
0402
0603
0805
1206
0804
1206
0603
0805
1206
1806
0603
0603
0603
0603
0603
2.0
3.2
1.25
1.6
1.6
1.0
4.5
2.0
BLA2AA
(4 circuits array)
3.2
1.0
BLA31A
(4 circuits array)
1.6
0.5
For High
BLM15B
BLM18B
BLM21B
BLM31B
Speed Signals
1.6
2.0
0.8
1.25
3.2
2.0
1.6
1.0
BLA2AB
(4 circuits array)
3.2
BLA31B
(4 circuits array)
1.6
For High
Current
1.6
2.0
BLM18P
0.8
BLM21P
1.25
3.2
4.5
BLM31P
1.6
1.6
BLM41P
For GHz Range
1.6
1.6
1.6
1.6
1.6
BLM18HG
BLM18HB
BLM18HD
BLM18HK
BLM18EG
0.8
0.8
0.8
0.8
0.8
Noise Suppression
Continued on the following page.
3
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Products Guide/Effective Frequency Range
Continued from the preceding page.
Dimensions
Effective Frequency Range
Type
Series
(mm)
EIA Code
10kHz 100kHz 1MHz 10MHz100MHz 1GHz 10GHz
Capacitor
Type
Standard
Type
1.6
0.8
NFM18C
0603
2.0
NFM21C
NFM3DC
NFM41C
0805
1205
1806
1206
0603
0603
0805
0805
1206
1206
0603
0805
1205
1806
1206
2706
1806
1.25
3.2
4.5
3.2
1.25
1.6
NFA31C
(4 circuits array)
1.6
For Signal
Lines
1.6
NFL18ST
NFL18SP
NFL21S
0.8
1.6
2.0
2.0
3.2
3.2
0.8
1.25
1.25
1.6
NFR21G
NFA31G
(4 circuits array)
NFW31S
NFM18P
NFM21P
NFM3DP
NFM41P
NFE31P
NFE61P(H)
VFM41R
1.6
For High
Current
1.6
2.0
0.8
1.25
1.25
3.2
4.5
3.2
1.6
1.6
1.6
T Filter for
High Current
6.8
With Varistor
Function
4.5
1.6
Common Mode
Choke Coils
1.25
3.2
DLP11S
DLP31S
DLP31D
DLM2HG
DLW21S
0504
1206
1206
1008
0805
1.0
1.6
1.6
3.2
2.5
2.0
2.0
2.0
1.2
DLW21H
DLW31S
0805
1206
1.2
1.6
3.2
5.0
2020
DLW5BS
(DLW5AH)
5.0
(3.6)
(2014)
Continued on the following page.
4
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Products Guide/Effective Frequency Range
Continued from the preceding page.
Dimensions
(mm) EIA Code
Effective Frequency Range
Type
Series
10kHz 100kHz 1MHz 10MHz100MHz 1GHz 10GHz
Disc EMIFIL®
BL01/02/03
DSN6/9(H)
DSS6/9(H)
DST9(H)
EMIGUARD®
(EMI Filters with varistor functions)
VFR3V
VFS6V/9V
Block EMIFIL®
BNX
Common Mode Choke Coils
PLT09H
EA10/20/21
EMC Absorber
5
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Outline of EMI Suppression Filters (EMIFILr) for DC Line
oChip Ferrite Bead
oFerrite Bead Inductor
Chip Ferrite Bead .............P.18–65
Ferrite Bead Inductor ..........P.106–108
BLM03
BLM21
BLM15
BLM31
BLM18
BLM41
BLA2A
BLA31
BL01
BL02RN1R3J2B
BL02RN2R3J2B
BL02RN1
BL02RN2R1M2B BL03RN2R1M1B
"ꢀChip Ferrite Beads are effective for frequencies ranging
from a few MHz to a few GHz. Chip Ferrite Beads are
widely used as a low noise countermeasure, as well as a
universal noise suppression component.
[Equivalent Circuit]
R(f)
" Chip Ferrite Beads produce a micro inductance in the low
frequency range. At high frequencies, however, the
resistive component of the inductor produces the primary
impedance. When inserted in series in the noise
producing circuit, the resistive impedance of the inductor
prevents noise propagation.
[Impedance-Frequency Characteristics (typical)]
1000
800
600
Z
400
200
0
R
X
1
10
100
1000
Frequency [MHz]
R : Real Part (Resistive Portion) X : Imaginary Part (Inductive Portion)
6
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Outline of EMI Suppression Filters (EMIFILr) for DC Line
oChip EMIFILr
oT-type Chip EMIFILr
oDisk Type EMIFILr
Chip EMIFILr ..............P.70–73
T-type Chip EMIFILr ...........P.86–88
P.74
P.89–92
NFM18P
NFM21C
NFM21P
NFE31P
NFE61P/H
NFM3DC
NFA31C
Disk Type EMIFILr ...........P.110–116
DS-6
DS-9
DS-9H
"ꢀThis capacitor type EMI suppression filter has a large
noise suppression effect at frequencies ranging from a
few MHz to hundreds of MHz. This type of filter is used
widely as a universal, high performance EMI suppression
component.
[Comparison of Insertion Loss Characteristics]
0
C
2200PF
20
40
60
80
"ꢀThe chip EMIFILr incorporates a built-in three-terminal
capacitor, eliminating the lead wire and thereby
increasing the high-frequency performance characteristic.
"ꢀThe T-type chip EMIFILr is a chip EMI suppression filter
with a built-in feed-thru capacitor. The use of ferrite
beads on input and output terminals minimizes
resonance with surrounding circuits.
1
5
10
50 100
Frequency [MHz]
500 1000
"ꢀWhatever the situation, 3-terminal construction reduces
residual inductance, thereby substantially improving
noise suppression at frequencies over 10MHz.
A 3-terminal capacitor has a higher self resonance frequency than
a general 2-terminal type and exhibits effective noise suppression
at high frequency.
7
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Outline of EMI Suppression Filters (EMIFILr) for DC Line
oChip EMIFILr for Signal Line
oChip EMIFILr with Waveform Distortion Suppressing Function
Chip EMIFILr for Signal Line ........P.30–39
Chip EMIFILr with Waveform
Distortion Suppressing Function ......P.75–80
P.53–56
P.81–85
NFW31S NFL18ST NFL18SP NFL21S BLM18B/18HD BLM21B
NFR21G
NFA31G
"ꢀHigh-speed signal application EMIFILr are high perfor-
mance EMI suppression filters which increase the slope
of insertion loss frequency characteristic curves (shape
factor), thereby improving noise and signal separation.
These are used for high speed signal applications in
which noise and signal frequency approach the same
value.
[Comparison of Insertion Loss Characteristics]
0
NFW31S
Conventional Type
20
40
60
80
To avoid the elimination of both the noise and specific
signal components, 3-terminal capacitors and other
components are applied.
An NFW31S with a built-in capacitor and an inductor type
BLM--B are available.
1
5
10
50 100
500 10002000
Frequency [MHz]
BLM18HD has additional performance for suppressing
GHz range noise after cut off frequency.
"ꢀThe EMIFILr with waveform distortion suppressing func-
tion suppresses waveform distortion caused by the reso-
nance of digital ICs and surrounding circuits.
[Waveform change when filter is inserted]
Conventional Type
(Chip 3-terminal Capacitor)
EMIFILr for Signal Line
NFW31S series
8
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Outline of EMI Suppression Filters (EMIFILr) for DC Line
oChip Common Mode Choke Coil
oCommon Mode Choke Coil
Chip Common Mode Choke Coil ......P.97–104
Common Mode Choke Coil ..........P.128
DLP11S
DLW21S
DLP31S
DLP31D
DLM2HG
DLW31S
DLW21H
PLT09H
DLW5AH
DLW5BS
"ꢀThese choke coils reduce common mode noise, which
causes problems on balanced transmission lines, and are
effective against common mode noise in the several MHz
to several 100 MHz frequency range.
[Construction of Common Mode Choke Coil]
They are ideally suited for noise suppression on DC
power supply lines and interface cables.
Current of Common Mode (Noise)
Current of Differential Mode (Signal)
[Equivalent Circuit]
[Impedance-Frequency Characteristics (DLW31S)]
10000
DLW31SN222SQ2
Common mode
DLW31SN102SQ2
DLW31SN601SQ2
DLW31SN261SQ2
1000
DLW31SN161SQ2
DLW31SN900SQ2
100
10
SN222
SN102
SN601
SN261
SN161
SN900
1
Differential mode
0.1
1
10
100
Frequency (MHz)
1000
9
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Outline of EMI Suppression Filters (EMIFILr) for DC Line
oChip EMIGUARDr
oEMIGUARDr
Chip EMIGUARDr ............P.94–95
EMIGUARDr .............P.118–124
VFM41R
VFR3V
VFS6V
VFS9V
"ꢀEMIGUARDr eliminates both surge noises and EMI
noises due to its dielectric varistor material.
"ꢀEffective when high frequency noise and high voltage
surge suppression are required, and also in situations
when surging starts at extremely high speeds. This type
of surging cannot be eliminated with general type varis-
tors.
[Construction of EMIGUARDr (VFS9V)]
Varistor
Electrode
Ferrite
Lead
"ꢀVFM41R is chip type of EMIGUARDr.
!Surge Absorption Effect of EMIGUARDr
Type of Filter
Surge Absorption Effect of EMIGUARDr
4kV
500V
/div
No filter
−1kV
−100ns
50ns/div
50ns/div
50ns/div
400ns
400ns
400ns
4kV
500V
/div
3-terminal capacitor is used
to suppress the surge.
−1kV
−100ns
4kV
500V
/div
EMIGUARDr is used to
suppressthe surge. (VFS6V)
−1kV
−100ns
10
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Outline of EMI Suppression Filters (EMIFILr) for DC Line
oBlock Type EMIFILr
Block Type EMIFILr ..........P.125–126
BNX002-01
BNX003-01
BNX005-01
"ꢀBlock type EMIFILr are resin encased, built-in, high per-
formance EMI suppression filters, which use a feed-thru
capacitor having excellent high frequency characteristics.
"ꢀUsed when the noise frequency is high, or when extreme
countermeasures are required.
[Equivalent Circuit (BNX Series)]
L1
L3
C2
CB
CG
B
C1
L2
PSG
"ꢀThe high performance EMIFILr BNX series exhibits sig-
nificant noise suppression effects over a wide frequency
band (extending from 100kHz to 1GHz) in DC power lines.
PSG: Power Supply Ground
CG: Circuit Ground
CB: Circuit + B
[Insertion Loss Characteristics]
0
BNX003-01
20
BNX002-01
(BNX005-01)
40
60
80
100
0.001
0.01
0.1
1
10
100
1000
Frequency [MHz]
11
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip Ferrite Beads Part Numbering
1
Chip Ferrite Beads
(Global Part Number)
N
1 D
BL
M
18 AG 102
S
q
w
e
r
t
y
u
i o
qProduct ID
tImpedance
Expressed by three figures. The unit is in ohm (Ω). The first and
second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
Product ID
BL
Chip Ferrite Beads
wType
yPerformance
Expressed by a letter.
Code
A
Type
Ex.)
Array Type
Code
Performance
M
Monolithic Type
S
Sn Plating
eDimensions (LgW)
uCategory
Code
03
Dimensions (LgW)
0.6g0.3mm
1.0g0.5mm
1.6g0.8mm
2.0g1.0mm
2.0g1.25mm
3.2g1.6mm
4.5g1.6mm
EIA
Code
N
Category
0201
0402
0603
0804
0805
1206
1806
Standard Type
for Heavy-duty
15
H
18
iNumber of Circuits
2A
21
Code
Number of Circuits
1 Circuit
31
1
4
41
4 Circuits
rCharacteristics/Applications
*1
Code
AF
Characteristics/Applications
Series
BLM31/BLM41
AG
AJ
BLM03/BLM15/BLM18/BLM21/BLM31/BLA2A/BLA31
for General Use
BLM21/BLM31
AH
BA
BB
BD
BE
PF
BLM21
BLM18
BLM15/BLM18/BLM21/BLA2A
BLM15/BLM18/BLM21/BLA31
BLM31
for High-speed Signal Lines
for Power Supplies
BLM41
PG
RK
HG
EG
HB
HD
HK
BLM18/BLM21/BLM31/BLM41
BLM18/BLM21
for Digital Interface
for GHz Band General Use
BLM18
for GHz Band General Use (Low DC Resistance type)
for GHz Band High-speed Signal Line
for GHz Band Digital Interface
BLM18
BLM18
*1 Frequency characteristics vary with each code.
oPackaging
Code
K
Packaging
Series
Plastic Taping (ø330mm Reel)
Plastic Taping (ø180mm Reel)
Bulk
*1
BLM31/BLM41/BLM21
L
B
All series
*2
BLM15/BLM18/BLM21 /BLA31
J
Paper Taping (ø330mm Reel)
Paper Taping (ø180mm Reel)
Bulk Case
*2
D
BLM03/BLM15/BLM18/BLM21 /BLA2A/BLA31
C
BLM15/BLM18
*1 BLM21BD222SN1/BLM21BD272SN1 only.
*2 Except BLM21BD222SN1/BLM21BD272SN1
12
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters(EMIFILr)
Chip Ferrite Bead BLM Series
Essential for Noise Suppression in High Speed Signal
Lines and DC Power Lines
1
The chip ferrite bead BLM series comprises ferrite beads in
the shape of a chip. This ferrite bead generates a high
impedance which at high frequencies mainly consists of a
resistance element. The BLM series is effective in circuits
without stable ground lines because the BLM series does
not need a connection to ground.
Chip sizes of 0.6Z0.3, 1.0Z0.5, 1.6Z0.8, 2.0Z1.25, 3.2Z1.6
and 4.5Z1.6mm are cataloged. (The BLA series of array
type chip ferrite beads is also cataloged.)
The nickel barrier structure of the external electrodes
provides excellent solder heat resistance.
!Features
The BLM series comprises the R series (for digital interface),
the A series (for standard), the B series (for high speed
signal), the P series (for large current), and the H/E series
(for GHz range noise suppression).
3. BLM--B series – For High Speed Signal
The BLM-B series can minimize attenuation of the signal
waveform due to its sharp impedance characteristics.
Various impedances are available to match signal
frequency.
1. BLM--R series – For Digital Interface
The BLM-R series can be used in Digital Interface.
Resistance of BLM-R series especially grows in the lower
frequency range. Therefore BLM-R series is less effective
for digital signal waveform at low frequency range and
can suppress the ringing.
4. BLM--P series – For Large Current
The BLM-P series can be used in high current circuits
due to its low DC resistance. It can match power lines to
a maximum of 6A DC (BLM41P).
5. BLM18H/E series – For GHz Range Noise Suppression
The BLM18H/E series has a modified internal electrode
structure that minimizes stray capacitance and increases
the effective frequency range.
2. BLM--A series – For Standard
The BLM-A series generates an impedance from the
relatively low frequencies. Therefore the BLM-A series is
effective in noise suppression in the wide frequency
range (30MHz – several hundred MHz).
[Impedance Characteristics]
BLM18HG102SN1
1800
BLM18BD102SN1
1500
1200
900
600
300
0
BLM18RK102SN1
BLM18AG102SN1
1
10
100
1000
Frequency (MHz)
13
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
!Impedance Map
2700
2250
2500
2200 2200
1800 1800
1500 1500
1000 1000 1000
750
1000
1000 1000 1000
1000 1000
1000 (1.5A)
470 (2A)
1000
1
600 600 600 600
470 470
600 600 600 600 600 600
600 (1.5A)
390 (2A)
600
470
470 470 470
420 420
470 470
400
390
330
220
330 330
330 330
330 (1.5A)
220 (2A)
220 220 220
220 220 220
220 220
180 (1.5A)
180 (3A)
150 150
150
80
150 150
140
120 120 120 120
120 120
120 120 120 (2A)
120 (3A)
120
100
100
80 (1A)
75 (3A)
75
47
75
60
47
75
60
70
70
70
60 (0.5A)
60 (3A)
60 (6A)
50 (3A)
33 (6A)
33 (3A)
30 (1A)
30 (3A)
22 (6A)
26
22
10
5
10
10
10
0603 1005 1608 2012 3216 4615 1005 1608 2012 3216 1608 2012
For Digital
1608
2012
3216
4516
1608
For Large Current
BLMppP
( )=Rated Current
GHz Range Noise
Suppression Type
BLM18H/E
For Standard
For High Speed Signal
Interface
BLMppA
BLMppB
BLMppR
size (mm)
14
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
!BLM Series
Impedance (Ω)
Part Number
Rated Current (mA)
Size (inches)
Type
at 100MHz
at 1GHz
BLM03AG100SN1
BLM03AG700SN1
BLM03AG121SN1
BLM15AG100SN1
BLM15AG700SN1
BLM15AG121SN1
BLM15AG221SN1
BLM15AG601SN1
BLM15AG102SN1
BLM15BB050SN1
BLM15BB100SN1
BLM15BB220SN1
BLM15BB470SN1
BLM15BB750SN1
BLM15BB121SN1
BLM15BB221SN1
BLM15BD471SN1
BLM15BD601SN1
BLM15BD102SN1
BLM18AG121SN1
BLM18AG151SN1
BLM18AG221SN1
BLM18AG331SN1
BLM18AG471SN1
BLM18AG601SN1
BLM18AG102SN1
BLM18BA050SN1
BLM18BB050SN1
BLM18BA100SN1
BLM18BB100SN1
BLM18BA220SN1
BLM18BB220SN1
BLM18BA470SN1
BLM18BB470SN1
BLM18BB600SN1
BLM18BA750SN1
BLM18BB750SN1
BLM18BA121SN1
BLM18BB121SN1
BLM18BD121SN1
BLM18BB141SN1
BLM18BB151SN1
BLM18BD151SN1
BLM18BB221SN1
BLM18BD221SN1
BLM18BB331SN1
BLM18BD331SN1
BLM18BD421SN1
BLM18BB471SN1
BLM18BD471SN1
BLM18BD601SN1
BLM18BD102SN1
BLM18BD152SN1
BLM18BD182SN1
BLM18BD222SN1
BLM18BD252SN1
10 (Typ.)
70 (Typ.)
120±25%
10 (Typ.)
70 (Typ.)
120±25%
220±25%
600±25%
1000±25%
5±25%
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
500
200
0603
For Standard
200
1000
500
300
1
For Standard
200
500
10±25%
0402
22±25%
300
200
47±25%
75±25%
For High Speed Signal
(Sharp impedance characteristics)
120±25%
220±25%
470±25%
600±25%
1000±25%
120±25%
150±25%
220±25%
330±25%
470±25%
600±25%
1000±25%
200
For Standard
100
500
700
5±25%
10±25%
22±25%
500
300
500
200
300
200
47±25%
60±25%
75±25%
0603
120±25%
140±25%
150±25%
For High Speed Signal
(Sharp impedance characteristics)
200
220±25%
330±25%
420±25%
470±25%
50
200
200
100
600±25%
1000±25%
1500±25%
1800±25%
2200±25%
2500±25%
50
Continued on the following page.
15
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
Impedance (Ω)
at 1GHz
Size (inches)
Type
Part Number
Rated Current (mA)
at 100MHz
120±25%
220±25%
470±25%
600±25%
1000±25%
30 (Typ.)
33±25%
BLM18RK121SN1
BLM18RK221SN1
BLM18RK471SN1
BLM18RK601SN1
BLM18RK102SN1
BLM18PG300SN1
BLM18PG330SN1
BLM18PG600SN1
BLM18PG121SN1
BLM18PG181SN1
BLM18HG471SN1
BLM18HG601SN1
BLM18HG102SN1
BLM18HB121SN1
BLM18HB221SN1
BLM18HB331SN1
BLM18HD471SN1
BLM18HD601SN1
BLM18HD102SN1
BLM18HK331SN1
BLM18HK471SN1
BLM18HK601SN1
BLM18HK102SN1
BLM18EG101TN1
BLM18EG121SN1
BLM18EG391TN1
BLM18EG601SN1
BLM21AG121SN1
BLM21AG151SN1
BLM21AG221SN1
BLM21AG331SN1
BLM21AJ401SN1
BLM21AG471SN1
BLM21AG601SN1
BLM21AJ601SN1
BLM21AG102SN1
BLM21AH102SN1
-
-
-
200
For Digital Interface
-
-
-
1000
3000*
500
1
-
-
For Large Current
60 (Typ.)
120±25%
180±25%
470±25%
600±25%
1000±25%
120±25%
220±25%
330±25%
470±25%
600±25%
1000±25%
330±25%
470±25%
600±25%
1000±25%
100±25%
120±25%
390±25%
600±25%
120±25%
150±25%
220±25%
330±25%
400±25%
470±25%
-
2000*
1500*
-
600 (Typ.)
200
700 (Typ.)
For Standard
1000 (Typ.)
100
200
100
50
500±40%
0603
1100±40%
1600±40%
For High Speed
Signal
1000 (Typ.)
100
50
1200 (Typ.)
1700 (Typ.)
GHz Range
400±40%
200
600±40%
For Digital
Interface
700±40%
100
50
1200±40%
140 (Typ.)
2000*
2000*
500
For Standard
(Low DC
Resistance Type)
145 (Typ.)
520 (Typ.)
700 (Typ.)
300
-
-
-
-
-
-
-
-
-
-
0805
For Standard
200
600±25%
1000±25%
Continued on the following page.
* Please see P. 51 "Derating of Rated Current".
16
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
Impedance (Ω)
Size (inches)
Type
Part Number
Rated Current (mA)
at 100MHz
5±25%
at 1GHz
BLM21BB050SN1
BLM21BB600SN1
BLM21BB750SN1
BLM21BB121SN1
BLM21BD121SN1
BLM21BB151SN1
BLM21BD151SN1
BLM21BB201SN1
BLM21BB221SN1
BLM21BD221SN1
BLM21BB331SN1
BLM21BD331SN1
BLM21BD421SN1
BLM21BB471SN1
BLM21BD471SN1
BLM21BD601SN1
BLM21BD751SN1
BLM21BD102SN1
BLM21BD152SN1
BLM21BD182SN1
BLM21BD222SN1
BLM21BD222TN1
BLM21BD272SN1
BLM21RK121SN1
BLM21RK221SN1
BLM21RK471SN1
BLM21RK601SN1
BLM21RK102SN1
BLM21PG220SN1
BLM21PG300SN1
BLM21PG600SN1
BLM21PG221SN1
BLM21PG331SN1
BLM31AJ260SN1
BLM31AF700SN1
BLM31AJ601SN1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
500
60±25%
75±25%
120±25%
150±25%
200±25%
220±25%
1
330±25%
420±25%
470±25%
For High Speed Signal
(Sharp impedance characteristics)
200
600±25%
750±25%
1000±25%
1500±25%
1800±25%
2250 (Typ.)
2200±25%
2700±25%
120±25%
220±25%
470±25%
600±25%
1000±25%
22±25%
0805
For Digital Interface
200
6000*
3000*
30 (Typ.)
60±25%
For Large Current
For Standard
220±25%
330±25%
26±25%
2000*
1500*
500
70±25%
200
600±25%
For High Speed Signal
(Sharp impedance characteristics)
BLM31BE601FN1
-
600±25%
300
1206
BLM31PG330SN1
BLM31PG500SN1
BLM31PG121SN1
BLM31PG391SN1
BLM31PG601SN1
BLM41AF800SN1
BLM41AF151SN1
BLM41PG600SN1
BLM41PG750SN1
BLM41PF800SN1
BLM41PG181SN1
BLM41PG471SN1
BLM41PG102SN1
-
-
-
-
-
-
-
-
-
-
-
-
-
33±25%
50 (Typ.)
120±25%
390±25%
600±25%
80±25%
6000*
3000*
For Large Current
For Standard
2000*
1500*
500
150±25%
60 (Typ.)
75 (Typ.)
80 (Typ.)
180±25%
470±25%
1000±25%
200
6000*
3000*
1000*
3000*
2000*
1500*
1806
For Large Current
* Please see P.51 "Derating of Rated Current".
17
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip Ferrite Beads BLM03/BLM15/BLM18/BLM21/BLM31/BLM41 Series
■ Features (BLM_A Series)
1
The chip ferrite bead BLM series comprises ferrite
beads in the shape of a chip. This ferrite bead
generates a high impedance which at high frequency
mainly consists of a resistance element. The BLM
series is effective in circuits without stable ground
lines because the BLM series does not need a
connection to ground.
■ Equivalent Circuit
The nickel barrier structure of the external
electrodes provides excellent solder heat resistance.
BLM_A series generates an impedance from the
relatively low frequencies. Therefore BLM_A series is
effective in noise suppression in a wide frequency
range (30MHz - several hundred MHz).
(Resistance element becomes dominant
at high frequencies.)
The small size of BLM03 series (0.6x0.3mm) is
suitable for noise suppression in small equipment
such as PA modules for cellular phones.
BLM03A Series (0201 Size)
0.6±0.03
0.3±0.03
0.15±0.05
: electrode
(in mm)
Impedance
(at 100MHz, 20 degree C)
(ohm)
Operating
Rated Current
(mA)
DC Resistance (max.)
(ohm)
Part Number
Temperature Range
(°C)
BLM03AG100SN1
BLM03AG700SN1
BLM03AG121SN1
10 (Typ.)
70 (Typ.)
120 ±25%
500
200
200
0.1
0.5
0.8
-55 to 125
-55 to 125
-55 to 125
18
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
■ Impedance-Frequency (Typical)
BLM03 Series
300
250
200
BLM03AG121SN1
150
1
100
BLM03AG700SN1
BLM03AG100SN1
50
0
1000 2000
1000 2000
1000 2000
1
10
100
Frequency (MHz)
■ Impedance-Frequency Characteristics
BLM03AG100SN1
BLM03AG700SN1
20
150
120
90
60
30
0
15
Z
R
Z
10
R
X
5
X
0
1000 2000
1
10
100
1
10
100
Frequency (MHz)
Frequency (MHz)
BLM03AG121SN1
300
250
200
150
100
50
Z
R
X
0
1
10
100
Frequency (MHz)
BLM15A Series (0402 Size)
0.25±0.1
1.0±0.05
0.5±0.05
BLM15A Series
(in mm)
19
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Impedance
(at 100MHz, 20 degree C)
(ohm)
Operating
Temperature Range
(°C)
Rated Current
(mA)
DC Resistance (max.)
(ohm)
Part Number
BLM15AG100SN1
BLM15AG700SN1
BLM15AG121SN1
BLM15AG221SN1
BLM15AG601SN1
BLM15AG102SN1
10 (Typ.)
70 (Typ.)
1000
500
500
300
300
200
0.05
0.15
0.25
0.35
0.6
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
120 ±25%
220 ±25%
600 ±25%
1000 ±25%
1.0
1
■ Impedance-Frequency (Typical)
BLM15A Series
1200
BLM15AG102SN1
1000
800
BLM15AG601SN1
600
BLM15AG221SN1
BLM15AG121SN1
400
BLM15AG700SN1
BLM15AG100SN1
200
0
1
10
100
1000
1000
1000
Frequency (MHz)
■ Impedance-Frequency Characteristics
BLM15AG100SN1
BLM15AG700SN1
20
120
100
80
60
40
20
0
15
Z
Z
R
R
10
X
5
X
0
1
10
100
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
BLM15AG121SN1
BLM15AG221SN1
200
150
100
50
400
300
200
100
0
Z
Z
R
R
X
X
0
1
10
100
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
20
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency Characteristics
BLM15AG601SN1
BLM15AG102SN1
1200
800
Z
900
600
600
Z
R
R
400
1
300
0
200
X
X
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
BLM18A Series (0603 Size)
0.4±0.2
1.6±0.15
0.8±0.15
BLM18A Series
(in mm)
Impedance
(at 100MHz, 20 degree C)
(ohm)
Operating
Rated Current
(mA)
DC Resistance (max.)
(ohm)
Part Number
Temperature Range
(°C)
BLM18AG121SN1
BLM18AG151SN1
BLM18AG221SN1
BLM18AG331SN1
BLM18AG471SN1
BLM18AG601SN1
BLM18AG102SN1
120 ±25%
150 ±25%
220 ±25%
330 ±25%
470 ±25%
600 ±25%
1000 ±25%
200
200
200
200
200
200
100
0.20
0.25
0.30
0.45
0.50
0.50
0.70
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
■ Impedance-Frequency (Typical)
BLM18A Series
1200
BLM18AG102SN1
BLM18AG601SN1
900
BLM18AG471SN1
BLM18AG331SN1
BLM18AG221SN1
600
BLM18AG151SN1
BLM18AG121SN1
300
0
1
10
100
Frequency (MHz)
1000
21
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
■ Impedance-Frequency Characteristics
BLM18AG121SN1
BLM18AG151SN1
200
400
150
300
200
Z
R
100
Z
1
R
X
50
100
0
X
0
1
10
100
Frequency (MHz)
1000
1
10
100
1000
1000
1000
Frequency (MHz)
BLM18AG221SN1
BLM18AG331SN1
600
400
450
300
300
200
Z
Z
R
R
X
150
0
100
0
X
1
10
100
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
BLM18AG471SN1
BLM18AG601SN1
800
800
Z
600
400
600
400
R
Z
R
X
200
0
200
0
X
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
BLM18AG102SN1
1200
Z
900
600
R
300
0
X
1
10
100
Frequency (MHz)
1000
22
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
BLM21A Series (0805 Size)
0.5±0.2 *2
1
2.0±0.2
1.25±0.2
*1 BLM21BD222SN1 / 21BD272SN1
:1.25±0.2
*2 BLM21BD272SN1: 0.3±0.2
EIA CODE : 0805
in mm
BLM21A Series
Impedance
(at 100MHz, 20 degree C)
(ohm)
Operating
Temperature Range
(°C)
Rated Current
(mA)
DC Resistance (max.)
(ohm)
Part Number
BLM21AG121SN1
BLM21AG151SN1
BLM21AG221SN1
BLM21AG331SN1
BLM21AJ401SN1
BLM21AG471SN1
BLM21AG601SN1
BLM21AJ601SN1
BLM21AG102SN1
BLM21AH102SN1
120 ±25%
150 ±25%
220 ±25%
330 ±25%
400 ±25%
470 ±25%
600 ±25%
600 ±25%
1000 ±25%
1000 ±25%
200
200
200
200
200
200
200
200
200
200
0.15
0.15
0.20
0.25
0.85
0.25
0.30
1.10
0.45
0.45
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 85
■ Impedance-Frequency (Typical)
BLM21A Series
1200
BLM21AH102SN1
BLM21AG102SN1
BLM21AG601SN1
BLM21AJ601SN1
900
BLM21AG471SN1
BLM21AG331SN1
BLM21AG221SN1
BLM21AJ401SN1
600
BLM21AG151SN1
BLM21AG121SN1
300
0
1
10
100
Frequency (MHz)
1000
■ Impedance-Frequency Characteristics
BLM21AG121SN1
BLM21AG151SN1
200
200
Z
150
100
150
R
Z
R
100
X
X
50
0
50
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
Continued on the following page.
23
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency Characteristics
BLM21AG221SN1
BLM21AG331SN1
400
400
Z
300
300
200
R
Z
200
R
1
X
100
100
0
X
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
BLM21AJ401SN1
BLM21AG471SN1
800
500
400
300
200
100
0
600
400
Z
Z
R
R
200
0
X
X
1
10
100
Frequency (MHz)
1000
1
10
100
1000
1000
1000
Frequency (MHz)
BLM21AG601SN1
BLM21AJ601SN1
800
800
600
400
600
400
Z
Z
R
R
X
200
0
200
0
X
1
10
100
Frequency (MHz)
1
10
100
1000
Frequency (MHz)
BLM21AG102SN1
BLM21AH102SN1
1200
1200
900
600
900
600
Z
Z
R
R
X
X
300
0
300
0
1
10
100
Frequency (MHz)
1
10
100
Frequency (MHz)
1000
24
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
BLM31A Series (1206 Size)
0.7±0.3
3.2±0.2
1.6±0.2
1
* BLM31AF700SN1 : 1.6±0.2
(in mm)
BLM31A Series
Impedance
(at 100MHz, 20 degree C)
(ohm)
Operating
Rated Current
(mA)
DC Resistance (max.)
(ohm)
Part Number
Temperature Range
(°C)
BLM31AJ260SN1
BLM31AF700SN1
BLM31AJ601SN1
26 ±25%
70 ±25%
600 ±25%
500
200
200
0.05
0.15
0.90
-55 to 125
-55 to 125
-55 to 125
■ Impedance-Frequency (Typical)
■ Impedance-Frequency Characteristics
BLM31A Series
BLM31AJ260SN1
40
800
BLM31AJ601SN1
30
600
400
200
0
Z
R
20
10
X
BLM31AF700SN1
BLM31AJ260SN1
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
BLM31AF700SN1
BLM31AJ601SN1
800
100
Z
600
400
75
50
Z
R
R
X
X
200
0
25
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
25
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
BLM41A Series (1806 Size)
0.7±0.3
4.5±0.2
1.6±0.2
1
BLM41A Series
(in mm)
Impedance
(at 100MHz, 20 degree C)
(ohm)
Operating
Rated Current
(mA)
DC Resistance (max.)
(ohm)
Part Number
Temperature Range
(°C)
BLM41AF800SN1
BLM41AF151SN1
80 ±25%
500
200
0.10
0.50
-55 to 125
-55 to 125
150 ±25%
■ Impedance-Frequency (Typical)
BLM41A Series
200
BLM41AF151SN1
150
BLM41AF800SN1
100
50
0
1
10
100
Frequency (MHz)
1000
■ Impedance-Frequency Characteristics
BLM41AF800SN1
BLM41AF151SN1
200
100
Z
150
100
75
Z
R
R
50
X
X
50
0
25
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
26
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
■ Features (BLM_B Series)
The chip ferrite bead BLM series comprises ferrite
beads in the shape of a chip. This ferrite bead
generates a high impedance which at high frequencies
mainly consists of a resistance element. The BLM
series is effective in circuits without stable ground
lines because the BLM series does not need a
connection to ground.
■ Equivalent Circuit
1
The nickel barrier structure of the external
electrodes provides excellent solder heat resistance.
The BLM_B series can minimize attenuation of the
signal waveform due to its sharp impedance
characteristics. Various impedances are available to
match signal frequency.
(Resistance element becomes dominant
at high frequencies.)
BLM15B Series (0402 Size)
0.25±0.1
1.0±0.05
0.5±0.05
BLM15B Series
(in mm)
Impedance
(at 100MHz, 20 degree C)
(ohm)
Operating
Rated Current
(mA)
DC Resistance (max.)
Part Number
Temperature Range
(ohm)
(°C)
BLM15BB050SN1
BLM15BB100SN1
BLM15BB220SN1
BLM15BB470SN1
BLM15BB750SN1
BLM15BB121SN1
BLM15BB221SN1
BLM15BD471SN1
BLM15BD601SN1
BLM15BD102SN1
5 ±25%
10 ±25%
22 ±25%
47 ±25%
75 ±25%
120 ±25%
220 ±25%
470 ±25%
600 ±25%
1000 ±25%
500
300
300
300
300
300
200
200
200
200
0.08
0.10
0.20
0.35
0.40
0.55
0.80
0.60
0.65
0.90
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
Rated current is 6A for taping type.
27
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
■ Impedance-Frequency (Typical)
BLM15BB Series
BLM15BD Series
1600
800
700
BLM15BD102SN1
BLM15BB221SN1
1200
800
600
500
400
300
200
100
0
BLM15BB121SN1
BLM15BB750SN1
BLM15BD601SN1
BLM15BD471SN1
BLM15BB470SN1
BLM15BB220SN1
1
400
0
BLM15BB100SN1
BLM15BB050SN1
1
10
100
1000
1
10
100
1000
1000
1000
1000
Frequency (MHz)
Frequency (MHz)
■ Impedance-Frequency Characteristics
BLM15BB050SN1
BLM15BB100SN1
30
60
50
40
30
20
10
25
20
15
Z
Z
X
10
X
5
R
R
0
0
1
1
10
100
100
100
10
100
1000
1000
1000
Frequency (MHz)
Frequency (MHz)
BLM15BB220SN1
BLM15BB470SN1
100
200
80
60
40
20
0
150
100
50
Z
Z
X
R
X
R
0
1
10
1
10
100
Frequency (MHz)
Frequency (MHz)
BLM15BB750SN1
BLM15BB121SN1
400
300
200
100
0
600
450
300
150
0
Z
Z
X
X
R
R
1
10
1
10
100
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
28
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency Characteristics
BLM15BB221SN1
BLM15BD471SN1
1000
800
Z
750
500
600
Z
R
400
1
X
X
200
0
250
0
R
1
10
100
1000
1
10
100
Frequency (MHz)
1000
Frequency (MHz)
BLM15BD601SN1
BLM15BD102SN1
1200
1600
Z
Z
900
600
1200
800
R
R
X
X
300
0
400
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
29
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
BLM18B Series (0603 Size)
0.4±0.2
1
1.6±0.15
0.8±0.15
BLM18B Series
(in mm)
Impedance
(at 100MHz, 20 degree C)
(ohm)
Operating
Rated Current
(mA)
DC Resistance (max.)
(ohm)
Part Number
Temperature Range
(°C)
BLM18BA050SN1
BLM18BB050SN1
BLM18BA100SN1
BLM18BB100SN1
BLM18BA220SN1
BLM18BB220SN1
BLM18BA470SN1
BLM18BB470SN1
BLM18BB600SN1
BLM18BA750SN1
BLM18BB750SN1
BLM18BA121SN1
BLM18BB121SN1
BLM18BD121SN1
BLM18BB141SN1
BLM18BB151SN1
BLM18BD151SN1
BLM18BB221SN1
BLM18BD221SN1
BLM18BB331SN1
BLM18BD331SN1
BLM18BD421SN1
BLM18BB471SN1
BLM18BD471SN1
BLM18BD601SN1
BLM18BD102SN1
BLM18BD152SN1
BLM18BD182SN1
BLM18BD222SN1
BLM18BD252SN1
5 ±25%
5 ±25%
500
700
500
500
500
500
300
500
200
300
200
200
200
200
200
200
200
200
200
200
200
200
50
0.20
0.10
0.25
0.15
0.35
0.25
0.55
0.30
0.35
0.70
0.35
0.90
0.50
0.40
0.55
0.55
0.40
0.65
0.45
0.75
0.50
0.55
1.00
0.55
0.65
0.85
1.20
1.50
1.50
1.50
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
10 ±25%
10 ±25%
22 ±25%
22 ±25%
47 ±25%
47 ±25%
60 ±25%
75 ±25%
75 ±25%
120 ±25%
120 ±25%
120 ±25%
140 ±25%
150 ±25%
150 ±25%
220 ±25%
220 ±25%
330 ±25%
330 ±25%
420 ±25%
470 ±25%
470 ±25%
600 ±25%
1000 ±25%
1500 ±25%
1800 ±25%
2200 ±25%
2500 ±25%
200
200
100
50
50
50
50
30
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
■ Impedance-Frequency (Typical)
BLM18BA Series
BLM18BA Series
600
10000
450
300
7500
5000
BLM18BA220SN1
BLM18BA121SN1
1
BLM18BA100SN1
BLM18BA050SN1
BLM18BA750SN1
BLM18BA470SN1
150
0
2500
0
1000 2000
1
10
100
1000 2000
1
10
100
Frequency(MHz)
Frequency(MHz)
BLM18BB Series
BLM18BB Series
2000
200
BLM18BB471SN1
1500
1000
150
100
BLM18BB331SN1
BLM18BB221SN1
BLM18BB151SN1
BLM18BB470SN1
BLM18BB220SN1
BLM18BB141SN1
BLM18BB121SN1
BLM18BB750SN1
BLM18BB100SN1
BLM18BB050SN1
500
0
50
0
BLM18BB600SN1
1
10
100
Frequency (MHz)
1000
1
10
100
1000
Frequency (MHz)
BLM18BD Series
2800
BLM18BD252SN1
BLM18BD222SN1
BLM18BD182SN1
2100
1400
BLM18BD152SN1
BLM18BD102SN1
BLM18BD601SN1
BLM18BD221SN1
BLM18BD151SN1
BLM18BD121SN1
BLM18BD471SN1
BLM18BD421SN1
BLM18BD331SN1
700
0
1
10
100
Frequency (MHz)
1000
■ Impedance-Frequency Characteristics
BLM18BA050SN1
BLM18BB050SN1
40
100
Z
30
20
75
50
R
X
Z
R
10
25
0
X
0
1
1000 2000
10
100
Frequency (MHz)
1000
1
10
100
Frequency(MHz)
Continued on the following page.
31
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency Characteristics
BLM18BA100SN1
BLM18BB100SN1
200
40
Z
150
100
30
20
Z
R
R
X
1
X
50
0
10
0
1000 2000
1
10
100
Frequency(MHz)
1
10
100
1000
Frequency (MHz)
BLM18BA220SN1
BLM18BB220SN1
100
600
75
50
450
300
Z
Z
R
X
R
25
0
150
0
X
1000 2000
1
10
100
Frequency(MHz)
1
10
100
1000
Frequency (MHz)
BLM18BA470SN1
BLM18BB470SN1
1600
200
Z
1200
800
150
100
R
X
Z
400
0
50
0
R
X
1000 2000
1
10
100
1
10
100
Frequency (MHz)
1000
Frequency(MHz)
BLM18BB600SN1
BLM18BA750SN1
400
6000
300
200
4500
3000
Z
R
100
0
1500
0
X
Z
R
X
1000 2000
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency(MHz)
Continued on the following page.
32
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency Characteristics
BLM18BB750SN1
BLM18BA121SN1
400
10000
300
200
7500
5000
Z
R
X
1
100
0
2500
0
Z
R
X
1000 2000
1
10
100
Frequency(MHz)
1
10
100
Frequency (MHz)
1000
BLM18BB121SN1
BLM18BD121SN1
400
600
300
200
450
300
Z
Z
R
X
100
0
150
0
X
R
1
10
100
1000
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
BLM18BB141SN1
BLM18BB151SN1
600
600
Z
Z
450
300
450
300
R
X
R
X
150
0
150
0
1
10
100
1000
1
10
100
Frequency (MHz)
1000
Frequency (MHz)
BLM18BD151SN1
BLM18BB221SN1
600
800
Z
R
450
300
600
400
Z
R
X
X
150
0
200
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
Continued on the following page.
33
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency Characteristics
BLM18BD221SN1
BLM18BB331SN1
1600
800
1200
800
600
Z
R
X
Z
400
1
R
400
0
200
X
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
1000
1000
BLM18BD331SN1
BLM18BD421SN1
800
1000
600
400
750
500
Z
Z
R
R
X
X
200
0
250
0
1
10
100
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
BLM18BB471SN1
BLM18BD471SN1
2000
1200
Z
1500
1000
800
600
Z
R
R
X
X
500
0
400
0
1
10
100
Frequency (MHz)
1
10
100
Frequency (MHz)
1000
BLM18BD601SN1
BLM18BD102SN1
1200
2000
Z
Z
900
600
1500
1000
R
R
X
X
300
0
500
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
Continued on the following page.
34
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency Characteristics
BLM18BD152SN1
BLM18BD182SN1
2000
2400
Z
1500
1800
1200
R
Z
R
1000
X
1
X
500
0
600
0
1
10
100
1000
1
10
100
Frequency (MHz)
1000
Frequency (MHz)
BLM18BD222SN1
BLM18BD252SN1
2800
2400
Z
Z
2100
1400
1800
1200
R
R
X
X
700
0
600
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
35
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
BLM21B Series (0805 Size)
0.5±0.2 *2
1
2.0±0.2
1.25±0.2
*1 BLM21BD222SN1 / 21BD272SN1
:1.25±0.2
*2 BLM21BD272SN1: 0.3±0.2
EIA CODE : 0805
in mm
BLM21B Series
Impedance
(at 100MHz, 20 degree C)
(ohm)
Operating
Temperature Range
(°C)
Rated Current
(mA)
DC Resistance (max.)
(ohm)
Part Number
BLM21BB050SN1
BLM21BB600SN1
BLM21BB750SN1
BLM21BB121SN1
BLM21BD121SN1
BLM21BB151SN1
BLM21BD151SN1
BLM21BB201SN1
BLM21BB221SN1
BLM21BD221SN1
BLM21BB331SN1
BLM21BD331SN1
BLM21BD421SN1
BLM21BB471SN1
BLM21BD471SN1
BLM21BD601SN1
BLM21BD751SN1
BLM21BD102SN1
BLM21BD152SN1
BLM21BD182SN1
BLM21BD222TN1
BLM21BD222SN1
BLM21BD272SN1
5 ±25%
60 ±25%
500
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.07
0.20
0.25
0.25
0.25
0.25
0.25
0.35
0.35
0.25
0.40
0.30
0.30
0.45
0.35
0.35
0.40
0.40
0.45
0.50
0.60
0.60
0.80
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
75 ±25%
120 ±25%
120 ±25%
150 ±25%
150 ±25%
200 ±25%
220 ±25%
220 ±25%
330 ±25%
330 ±25%
420 ±25%
470 ±25%
470 ±25%
600 ±25%
750 ±25%
1000 ±25%
1500 ±25%
1800 ±25%
2200 ±25%
2250 (Typ.)
2700 ±25%
■ Impedance-Frequency (Typical)
BLM21BB Series
BLM21BD Series
2000
3200
BLM21BD272SN1
BLM21BD222SN1
BLM21BD222TN1
1500
2400
1600
BLM21BD182SN1
BLM21BD152SN1
BLM21BD102SN1
BLM21BD751SN1
BLM21BD601SN1
BLM21BB471SN1
BLM21BB331SN1
BLM21BB201SN1
BLM21BB750SN1
BLM21BB221SN1
1000
BLM21BD471SN1
BLM21BB151SN1
BLM21BD421SN1
BLM21BD331SN1
BLM21BD221SN1
BLM21BB121SN1
BLM21BB600SN1
500
800
0
BLM21BD151SN1
BLM21BD121SN1
BLM21BB050SN1
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
Continued on the following page.
36
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency Characteristics
BLM21BB050SN1
BLM21BB600SN1
40
400
30
300
200
Z
R
X
20
Z
1
X
10
0
100
0
R
1
10
100
Frequency (MHz)
1000
1000
1000
1
10
100
1000
Frequency (MHz)
BLM21BB750SN1
BLM21BB121SN1
400
600
300
200
450
300
Z
R
Z
R
X
100
0
150
0
X
1
10
100
1
10
100
Frequency (MHz)
1000
1000
1000
Frequency (MHz)
BLM21BD121SN1
BLM21BB151SN1
400
800
300
200
600
400
Z
Z
R
R
X
100
0
200
0
X
1
10
100
Frequency (MHz)
1
10
100
Frequency (MHz)
BLM21BD151SN1
BLM21BB201SN1
400
1200
300
200
900
600
Z
Z
R
R
X
100
0
300
0
X
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
Continued on the following page.
37
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency Characteristics
BLM21BB221SN1
BLM21BD221SN1
600
1000
Z
450
300
750
R
Z
R
X
500
X
1
150
0
250
0
1
10
100
1000
1
10
100
Frequency (MHz)
1000
Frequency (MHz)
BLM21BB331SN1
BLM21BD331SN1
800
1200
Z
600
400
900
600
Z
R
R
X
X
200
0
300
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
1000
1000
BLM21BD421SN1
BLM21BB471SN1
2000
1000
Z
1500
1000
750
500
Z
R
R
X
X
500
0
250
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
BLM21BD471SN1
BLM21BD601SN1
1200
1200
Z
900
600
900
600
Z
R
X
R
X
300
0
300
0
1
10
100
Frequency (MHz)
1
10
100
Frequency (MHz)
1000
Continued on the following page.
38
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency Characteristics
BLM21BD751SN1
BLM21BD102SN1
1600
2000
1200
1500
1000
Z
Z
R
X
R
800
1
X
400
500
0
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
BLM21BD152SN1
BLM21BD182SN1
2400
2400
Z
Z
1800
1200
1800
1200
R
R
X
X
600
0
600
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
BLM21BD222TN1
BLM21BD222SN1
3200
2400
Z
2400
1600
1800
1200
Z
R
R
X
X
800
0
600
0
1
10
100
Frequency (MHz)
1000
1
10
100
1000
Frequency (MHz)
BLM21BD272SN1
3200
2400
1600
Z
R
X
800
0
1
10
100
Frequency (MHz)
1000
39
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
BLM31B Series (1206 Size)
0.7±0.3
3.2±0.2
1.6±0.2
1
in mm
BLM31B Series
Impedance
(at 100MHz, 20 degree C)
(ohm)
Operating
Rated Current
(mA)
DC Resistance (max.)
(ohm)
Part Number
Temperature Range
(°C)
BLM31BE601FN1
600 ±25%
300
0.35
-55 to 125
■ Impedance-Frequency (Typical)
BLM31B Series
800
600
BLM31BE601FN1
400
200
0
1
10
100
Frequency (MHz)
1000
■ Impedance-Frequency Characteristics
BLM31BE601FN1
800
Z
600
R
400
200
X
0
1
10
100
Frequency (MHz)
1000
40
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
■ Features (BLM_R Series)
The chip ferrite bead BLM series comprises ferrite
beads in the shape of a chip. This ferrite bead
generates a high impedance which at high frequencies
mainly consists of a resistance element. The BLM
series is effective in circuits without stable ground
lines because the BLM series does not need a
connection to ground.
■ Equivalent Circuit
1
The nickel barrier structure of the external
electrodes provides excellent solder heat resistance.
The BLM_R series can be used in a digital interface.
Resistance of BLM_R series especiallly grows in the
lower frequency range. Therefore BLM_R series is less
effective for digital signal waveform at low frequency
range and can suppress the ringing.
(Resistance element becomes dominant
at high frequencies.)
BLM18R Series (0603 Size)
0.4±0.2
1.6±0.15
0.8±0.15
BLM18R Series
(in mm)
Impedance
(at 100MHz, 20 degree C)
(ohm)
Operating
Rated Current
(mA)
DC Resistance (max.)
Part Number
Temperature Range
(ohm)
(°C)
BLM18RK121SN1
BLM18RK221SN1
BLM18RK471SN1
BLM18RK601SN1
BLM18RK102SN1
120 ±25%
220 ±25%
470 ±25%
600 ±25%
1000 ±25%
200
200
200
200
200
0.25
0.30
0.50
0.60
0.80
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
■ Impedance-Frequency (Typical)
BLM18R Series
1200
BLM18RK601SN1
BLM18RK102SN1
900
BLM18RK471SN1
BLM18RK221SN1
BLM18RK121SN1
600
300
0
1
10
100
1000
Frequency (MHz)
41
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
■ Impedance-Frequency Characteristics
BLM18RK121SN1
BLM18RK221SN1
400
200
300
200
150
Z
Z
R
R
100
1
100
0
50
X
X
0
1
10
100
1000
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
BLM18RK471SN1
BLM18RK601SN1
600
1000
Z
450
300
750
500
Z
R
R
150
0
250
0
X
X
1
10
100
1000
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
BLM18RK102SN1
1200
Z
900
600
R
X
300
0
1
10
100
1000
Frequency (MHz)
42
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
BLM21R Series (0805 Size)
0.5±0.2
1
2.0±0.2
1.25±0.2
EIA CODE : 0805
BLM21R Series
(in mm)
Impedance
(at 100MHz, 20 degree C)
(ohm)
Operating
Temperature Range
(°C)
Rated Current
(mA)
DC Resistance (max.)
(ohm)
Part Number
BLM21RK121SN1
BLM21RK221SN1
BLM21RK471SN1
BLM21RK601SN1
BLM21RK102SN1
120 ±25%
220 ±25%
470 ±25%
600 ±25%
1000 ±25%
200
200
200
200
200
0.15
0.20
0.25
0.30
0.50
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
■ Impedance-Frequency (Typical)
BLM21R Series
1200
BLM21RK601SN1
BLM21RK102SN1
900
600
BLM21RK471SN1
BLM21RK221SN1
BLM21RK121SN1
300
0
1
10
100
1000
Frequency (MHz)
■ Impedance-Frequency Characteristics
BLM21RK121SN1
BLM21RK221SN1
200
300
Z
150
225
150
R
Z
R
100
50
75
0
X
X
0
1
10
100
1000
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
43
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency Characteristics
BLM21RK471SN1
BLM21RK601SN1
1000
600
Z
750
500
450
R
Z
300
R
1
X
250
0
150
X
0
1
10
100
1000
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
BLM21RK102SN1
1200
900
600
Z
R
X
300
0
1
10
100
1000
Frequency (MHz)
44
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
■ Features (BLM_P Series)
The chip ferrite bead BLM series comprises ferrite
beads in the shape of a chip. This ferrite bead
generates a high impedance which at high frequencies
mainly consists of a resistance element. The BLM
series is effective in circuits without stable ground
lines because the BLM series does not need a
connection to ground.
■ Equivalent Circuit
1
The nickel barrier structure of the external
electrodes provides excellent solder heat resistance.
The BLM_P series can be used in high current circuits
due to its low DC resistance. It can match power lines
to a maximum of 6A DC (BLM41P).
(Resistance element becomes dominant
at high frequencies.)
BLM18P Series (0603 Size)
0.4±0.2
1.6±0.15
0.8±0.15
BLM18P Series
(in mm)
Impedance
(at 100MHz, 20 degree C)
(ohm)
Operating
Rated Current
(mA)
DC Resistance (max.)
Part Number
Temperature Range
(ohm)
(°C)
BLM18PG300SN1
BLM18PG330SN1
BLM18PG600SN1
BLM18PG121SN1
BLM18PG181SN1
30 (Typ.)
33 ±25%
60 (Typ.)
120 ±25%
180 ±25%
1000
3000
500
0.05
0.025
0.10
0.05
0.09
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
2000
1500
At rated current upper than 1500mA, derating is required.
Please refer P. 51, "Derating of Rated Current".
■ Impedance-Frequency (Typical)
BLM18P Series
300
240
BLM18PG181SN1
180
BLM18PG121SN1
120
60
0
BLM18PG600SN1
BLM18PG330SN1
BLM18PG300SN1
1
10
100
1000
Frequency (MHz)
45
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
■ Impedance-Frequency Characteristics
BLM18PG300SN1
BLM18PG330SN1
80
60
45
30
15
0
60
Z
40
R
Z
1
R
20
X
X
0
1
10
100
1000
1
10
100
Frequency (MHz)
1000
Frequency (MHz)
BLM18PG600SN1
BLM18PG121SN1
100
200
150
100
50
75
50
Z
Z
R
X
R
25
0
X
0
1
10
100
1000
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
BLM18PG181SN1
280
210
140
70
Z
R
X
0
1
10
100
1000
Frequency (MHz)
46
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
BLM21P Series (0805 Size)
0.5±0.2
1
2.0±0.2
1.25±0.2
EIA CODE : 0805
BLM21P Series
(in mm)
Impedance
(at 100MHz, 20 degree C)
(ohm)
Operating
Temperature Range
(°C)
Rated Current
(mA)
DC Resistance (max.)
(ohm)
Part Number
BLM21PG220SN1
BLM21PG300SN1
BLM21PG600SN1
BLM21PG221SN1
BLM21PG331SN1
22 ±25%
30 (Typ.)
60 ±25%
220 ±25%
330 ±25%
6000
3000
3000
2000
1500
0.01
0.015
0.025
0.050
0.09
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
At rated current upper than 1500mA, derating is required.
Please refer P. 51, "Derating of Rated Current".
■ Impedance-Frequency (Typical)
BLM21P Series
600
450
300
BLM21PG331SN1
BLM21PG221SN1
BLM21PG600SN1
BLM21PG300SN1
BLM21PG220SN1
150
0
1
10
100
Frequency (MHz)
1000
■ Impedance-Frequency Characteristics
BLM21PG220SN1
BLM21PG300SN1
40
60
30
45
30
Z
Z
R
20
R
X
10
X
15
0
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
Continued on the following page.
47
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency Characteristics
BLM21PG600SN1
BLM21PG221SN1
400
120
300
200
90
Z
Z
60
R
R
1
100
0
30
X
X
0
1
10
100
1000
1
10
100
Frequency (MHz)
1000
Frequency (MHz)
BLM21PG331SN1
600
450
300
Z
R
X
150
0
1
10
100
Frequency (MHz)
1000
BLM31P Series (1206 Size)
0.7±0.3
3.2±0.2
1.6±0.2
in mm
BLM31P Series
Impedance
(at 100MHz, 20 degree C)
(ohm)
Operating
Rated Current
(mA)
DC Resistance (max.)
(ohm)
Part Number
Temperature Range
(°C)
BLM31PG330SN1
BLM31PG500SN1
BLM31PG121SN1
BLM31PG391SN1
BLM31PG601SN1
33 ±25%
50 (Typ.)
120 ±25%
390 ±25%
600 ±25%
6000
3000
3000
2000
1500
0.01
0.025
0.025
0.05
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
0.09
At rated current upper than 1500mA, derating is required.
Please refer P. 51, "Derating of Rated Current".
48
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
■ Impedance-Frequency (Typical)
BLM31P Series
700
600
BLM31PG601SN1
500
BLM31PG391SN1
400
BLM31PG121SN1
300
BLM31PG500SN1
1
200
BLM31PG330SN1
100
0
1
10
100
Frequency (MHz)
1000
■ Impedance-Frequency Characteristics
BLM31PG330SN1
BLM31PG500SN1
80
60
Z
60
40
45
Z
R
X
R
30
X
20
0
15
0
1
10
100
1000
1
10
100
Frequency (MHz)
1000
Frequency (MHz)
BLM31PG121SN1
BLM31PG391SN1
200
600
150
100
450
300
Z
Z
R
R
50
0
150
0
X
X
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
BLM31PG601SN1
800
600
400
Z
R
X
200
0
1
10
100
Frequency (MHz)
1000
49
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
BLM41P Series (1806 Size)
0.7±0.3
4.5±0.2
1.6±0.2
1
BLM41P Series
(in mm)
Impedance
(at 100MHz, 20 degree C)
(ohm)
Operating
Rated Current
(mA)
DC Resistance (max.)
(ohm)
Part Number
Temperature Range
(°C)
BLM41PG600SN1
BLM41PG750SN1
BLM41PF800SN1
BLM41PG181SN1
BLM41PG471SN1
BLM41PG102SN1
60 (Typ.)
75 (Typ.)
6000
3000
1000
3000
2000
1500
0.01
0.025
0.10
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
80 (Typ.)
180 ±25%
470 ±25%
1000 ±25%
0.025
0.05
0.09
At rated current upper than 1500mA, derating is required.
Please refer P. 51, "Derating of Rated Current".
■ Impedance-Frequency (Typical)
BLM41P Series (80-180ohm)
BLM41P Series (470-1000ohm)
1200
200
BLM41AF151SN1
150
900
600
BLM41PG102SN
BLM41PG471SN
BLM41AF800SN1
100
300
0
50
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
■ Impedance-Frequency Characteristics
BLM41PG600SN1
BLM41PG750SN1
100
100
Z
75
50
75
Z
R
X
R
50
X
25
0
25
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
Continued on the following page.
50
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency Characteristics
BLM41PF800SN1
BLM41PG181SN1
400
100
Z
300
200
75
R
50
Z
1
X
R
100
0
25
X
0
1
10
100
Frequency (MHz)
1000
1
10
100
1000
Frequency (MHz)
BLM41PG471SN1
BLM41PG102SN1
600
1200
450
300
900
600
Z
Z
R
R
X
X
150
0
300
0
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
■ Notice (Rating)
In operating temperatures exceeding +85D, derating of
current is necessary for chip Ferrite Beads for which rated
current is 1.5A or over. Please apply the derating curve
shown below according to the operating temperature.
[Derating]
6A
6
5
4
3A
3
2A
2
1.5A
1A
1
0
85
Operating Temperature [D]
125
51
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Noise Suppression Effect of BLM_R Series
!Waveform Distortion Suppressing
Performance of BLM--R Series
[Measuring Circuits]
Measuring Point
AC00
AC04
Filter
Pattern20cm
1MHz
1
Type of Filter
EMI Suppression Effect / Description
Signal waveform (100nsec/div, 2V/div) Expand (10nsec/div, 2V/div)
Spectrum
85
80
75
70
65
60
55
50
45
Initial
(No filter)
30 50
100
150
200
250
250
250
300
Frequency [MHz]
Ringing is caused on the signal waveform.
Such ringing contains several hundred MHz harmonic components and generates noise.
Signal waveform (100nsec/div, 2V/div) Expand (10nsec/div, 2V/div)
Spectrum
85
80
75
70
65
60
55
50
45
Resister (47Ω) is used
30 50
100
150
200
300
Frequency [MHz]
Comparing initial waveform, ringing is suppressed a little.
However there still remains high level waveform distortion.
Signal waveform (100nsec/div, 2V/div) Expand (10nsec/div, 2V/div)
Spectrum
85
80
75
70
65
60
55
50
45
BLM18RK221SN1
(220Ω at 100MHz)
is used
30 50
100
150
200
300
Frequency [MHz]
BLM18R has excellent performance for noise suppression and waveform distortion suppression.
BLM18R suppresses drastically not only spectrum level in more than 100MHz range but waveform distortion.
52
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
GHz Noise Suppression Chip Ferrite Beads BLM18H/BLM18E Series
BLM18H/BLM18E series has a modified internal electrode
1
structure, that minimizes stray capacitance and
increases the effective frequency range.
■ Equivalent Circuit
■ Features (BLM18H series)
1. BLM18H series is realized high impedance at 1GHz
and suitable for noise suppression from 500MHz to
GHz range. The impedance value of HG/HD-type is
about three times as large as that of A/B-type at
1GHz, though the impedance characteristic of
HG/HD-type is similar to A-type at 100MHz or less.
2. HG-type is effective in noise suppression in wide
frequency range (several MHz to several GHz).
HB/HD-type for high-speed signal line provides a
sharper roll-off after the cut off frequency.
(Resistance element becomes dominant
at high frequencies.)
HK-type for digital interface is effective in
suppressing the ringing because resistance
especially grows in the lower frequency.
3. The magnetic shielded structure minimizes crosstalk.
■ Features (BLM18E series)
1. Low DC Resistance and a large Rated Current are
suitable for noise suppression of the driver
circuit.
2. Excellent direct current characteristics
3. Thin type (t=0.5mm) is suitable for small and low
profile equipment such as DSC, cellular phones.
53
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
BLM18H Series (0603 Size)
0.4±0.2
1
1.6±0.15
0.8±0.15
BLM18H Series
(in mm)
Impedance
Impedance
Operating
Rated Current
(mA)
DC Resistance (max.)
(ohm)
Part Number
(at 100MHz, 20 degree C) (at 1GHz, 25 degree C)
Temperature Range
(ohm)
(ohm)
(°C)
BLM18HG471SN1
BLM18HG601SN1
BLM18HG102SN1
BLM18HB121SN1
BLM18HB221SN1
BLM18HB331SN1
BLM18HD471SN1
BLM18HD601SN1
BLM18HD102SN1
BLM18HK331SN1
BLM18HK471SN1
BLM18HK601SN1
BLM18HK102SN1
470 ±25%
600 (Typ.)
200
200
100
200
100
50
0.85
1.00
1.60
0.50
0.80
1.20
1.20
1.50
1.80
0.50
0.70
0.90
1.50
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
600 ±25%
1000 ±25%
120 ±25%
220 ±25%
330 ±25%
470 ±25%
600 ±25%
1000 ±25%
330 ±25%
470 ±25%
600 ±25%
1000 ±25%
700 (Typ.)
1000 (Typ.)
500 ±40%
1100 ±40%
1600 ±40%
1000 (Typ.)
1200 (Typ.)
1700 (Typ.)
400 ±40%
600 ±40%
700 ±40%
1200 ±40%
100
100
50
200
200
100
50
■ Impedance-Frequency (Typical)
BLM18HG Series
BLM18HB Series
1600
2000
BLM18HB331SN1
BLM18HB221SN1
BLM18HB121SN1
1500
1200
800
BLM18HG102SN1
BLM18HG601SN1
1000
BLM18HG471SN1
400
0
500
0
1
10
100
1000 2000
1
10
100
1000
2000
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
54
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency (Typical)
BLM18HD Series
BLM18HK Series
1600
4000
BLM18HK102SN1
BLM18HK601SN1
1200
800
3000
BLM18HD102SN1
BLM18HK471SN1
BLM18HK331SN1
2000
1
BLM18HD601SN1
400
0
BLM18HD471SN1
1000
0
1000 2000
1
10
100
1000 2000
1000 2000
1000 2000
1
10
100
Frequency (MHz)
Frequency (MHz)
■ Impedance-Frequency Characteristics
BLM18HG471SN1
BLM18HG601SN1
1000
800
750
500
600
Z
Z
R
X
R
400
X
250
0
200
0
1000 2000
1
10
100
1
10
100
Frequency (MHz)
Frequency (MHz)
BLM18HG102SN1
BLM18HB121SN1
2000
700
600
500
400
300
200
100
0
1500
1000
Z
Z
R
R
500
0
X
X
1
10
100
Frequency (MHz)
1000 2000
1
10
100
Frequency (MHz)
BLM18HB221SN1
BLM18HB331SN1
1000
1600
750
500
1200
800
Z
Z
R
R
250
0
400
0
X
X
1
10
100
1000 2000
1
10
100
1000 2000
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
55
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency Characteristics
BLM18HD471SN1
BLM18HD601SN1
2000
2000
1500
1000
1500
1000
Z
Z
1
R
X
500
500
0
R
X
0
1000 2000
1
10
100
Frequency(MHz)
1000 2000
1
10
100
Frequency(MHz)
BLM18HD102SN1
BLM18HK331SN1
4000
600
3000
2000
450
300
Z
R
Z
1000
0
150
0
X
R
X
1000 2000
1
10
100
Frequency (MHz)
1000 2000
1
10
100
Frequency (MHz)
BLM18HK471SN1
BLM18HK601SN1
1000
750
500
250
0
800
600
400
Z
Z
R
R
200
0
X
X
1000 2000
1
10
100
Frequency (MHz)
1000 2000
1
10
100
Frequency (MHz)
BLM18HK102SN1
1600
1200
800
Z
R
400
0
X
1000 2000
1
10
100
Frequency (MHz)
56
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
BLM18E Series (0603 Size)
0.8±0.15
1.6±0.15
0.4±0.2
1
T
BLM18EGpppTN1
0.5±0.15
0.8±0.15
(in mm)
BLM18E Series
BLM18EGpppSN1
Impedance
Impedance
Operating
Rated Current
(mA)
DC Resistance (max.)
(ohm)
Part Number
(at 100MHz, 20 degree C) (at 1GHz, 25 degree C)
Temperature Range
(ohm)
(ohm)
(°C)
BLM18EG101TN1
BLM18EG121SN1
BLM18EG391TN1
BLM18EG601SN1
100 ±25%
140 (Typ.)
2000
2000
500
0.04
0.03
0.3
-55 to 125
-55 to 125
-55 to 125
-55 to 125
120 ±25%
390 ±25%
600 ±25%
145 (Typ.)
520 (Typ.)
700 (Typ.)
300
0.35
At rated current 2000mA, derating is required.
Please refer P. 51, "Derating of Rated Current".
■ Impedance-Frequency (Typical)
1000
800
BLM18EG601SN1
600
BLM18EG391TN1
BLM18EG121SN
400
BLM18EG101TN
200
0
1000 2000
1
10
100
Frequency (MHz)
■ Impedance-Frequency Characteristics
BLM18EG101TN1
BLM18EG121SN1
160
200
160
120
80
Z
120
Z
R
80
R
X
40
X
40
0
1
10
100
1000 2000
0
1
10
100
1000 2000
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
57
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency Characteristics
BLM18EG391TN1
BLM18EG601SN1
700
560
1000
750
500
250
0
Z
Z
420
R
X
R
1
280
140
X
0
1
10
100
1000 2000
1
10
100
1000 2000
Frequency (MHz)
Frequency (MHz)
58
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Noise Suppression Effect
!Noise Suppression in UHF Range
[Testing Circuit]
Measured radiation at 3m distance
74HCU04
74AC04
74HC00
1
BLM
10MHz
Type of Filter
EMI Suppression Effect
Description
70
60
50
40
30
20
10
Initial
(No filter)
300
400
400
400
500
500
500
600
700
800
800
800
900 1000
Frequency [MHz]
Current BLM are effective in suppressing
noise in the range between 300MHz and
700MHz.
70
60
50
40
30
20
10
Initial
Conventional Type
BLM18AG102SN1
(1000Ω at 100MHz)
300
600
700
900 1000
Frequency [MHz]
In addition to the effectiveness of current
BLM, BLM18HG suppresses noise in the
range beyond 700MHz.
70
60
50
40
30
20
10
Initial
BLM18AG102SN1
for GHz Noize Suppression
BLM18HG102SN1
(1000Ω at 100MHz)
300
600
700
900 1000
Frequency [MHz]
Comparison between BLM18HG102SN1 and
BLM18AG102SN1 (CURRENT ITEM)
2000
1500
1000
500
BLM18HG102SN1
BLM18AG102SN1
0
1
10
100
1000 2000
Frequency [MHz]
59
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip Ferrite Beads Arrays BLA2AA/BLA2AB/BLA31A/BLA31B Series
BLA2AA/BLA2AB Series
1
(1)
(2)
(3)
(4)
■ Features
1. BLA2AA/2AB series has 4 circuits in 2.0x1.0mm body
with 0.5mm pitch.
2. Provides attenuation across a broad frequency range.
Two types of impedance characteristics are
available; one is for general signal line and the
other is for high speed signal line.
3. Original inner electrode structure enables extra
low crosstalk.
(5)
(6)
(7)
(8)
2.0±0.2
0.25±0.15
0.5±0.1
: Electrode
(in mm)
4. The nickel barrier structure of the external
electrodes provides excellent solder heat
resistance.
■ Applications
Notebook size PC, PDA and other compact size digital
equipment
Impedance
(at 100MHz, 20 degree C)
(ohm)
Operating
Rated Current
(mA)
DC Resistance (max.)
(ohm)
Part Number
Temperature Range
(°C)
BLA2AAG121SN4
BLA2AAG221SN4
BLA2AAG601SN4
BLA2AAG102SN4
BLA2ABB100SN4
BLA2ABB220SN4
BLA2ABB470SN4
BLA2ABB121SN4
BLA2ABB221SN4
BLA2ABD471SN4
BLA2ABD601SN4
BLA2ABD102SN4
120 ±25%
220 ±25%
600 ±25%
1000 ±25%
10 ±25%
100
50
0.50
0.70
1.10
1.30
0.1
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
50
50
200
200
200
50
22 ±25%
0.2
47 ±25%
0.35
0.60
0.90
0.65
0.80
1.00
120 ±25%
220 ±25%
470 ±25%
600 ±25%
1000 ±25%
50
100
100
50
Number of Circuits : 4
■ Equivalent Circuit
■ Impedance-Frequency (Typical)
BLA2AA Series
1200
BLA2AAG102SN4
(1)
(2)
(3)
(4)
900
BLA2AAG601SN4
600
BLA2AAG221SN4
300
(5)
(6)
(7)
(8)
BLA2AAG121SN4
No polarity.
0
1
10
100
Frequency (MHz)
1000
Continued on the following page.
60
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency (Typical)
BLA2ABB Series
BLA2ABD Series
1000
1600
1200
800
400
0
800
600
BLA2ABD102SN4
BLA2ABD601SN4
BLA2ABB221SN4
400
200
0
1
BLA2ABD471SN4
BLA2ABB121SN4
1
10
100
1000
1
10
100
1000
1000
1000
Frequency (MHz)
Frequency (MHz)
■ Impedance-Frequency Characteristics
BLA2AAG121SN4
BLA2AAG221SN4
200
400
150
300
200
Z
Z
R
100
R
50
100
0
X
X
0
1
10
100
Frequency (MHz)
1
10
100
1000
Frequency (MHz)
BLA2AAG601SN4
BLA2AAG102SN4
800
1200
Z
600
400
900
600
R
R
Z
200
0
300
0
X
X
1
10
100
1
10
100
Frequency (MHz)
1000
Frequency (MHz)
BLA2ABB100SN4
BLA2ABB220SN4
50
40
30
20
10
0
100
75
50
25
0
Z
Z
X
X
R
R
1
10
100
1000
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
61
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency Characteristics
BLA2ABB470SN4
BLA2ABB121SN4
500
400
300
200
100
0
200
Z
R
R
Z
100
1
X
X
0
1
10
100
1000
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
BLA2ABB221SN4
BLA2ABD471SN4
1000
800
600
400
200
0
800
Z
600
400
200
0
Z
R
R
X
X
1
10
100
1000
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
BLA2ABD601SN4
BLA2ABD102SN4
1000
1600
1200
800
400
0
Z
800
600
400
200
0
Z
R
R
X
X
1
10
100
1000
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
62
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
BLA31A/BLA31B Series
(1)
(2)
(3)
(4)
The miniaturization of electronic equipment requires
high performance EMI filters which enable high density
mounting. BLA31A/B series consists of 4 circuits of
ferrite beads.
(5)
(6)
(7)
(8)
BLA31A/B is suitable for EMI suppression in smaller
digital equipment.
1
0.8±0.1
0.4±0.2
■ Features
3.2±0.2
1. BLA31A/B has 4 circuits in 3.2x1.6mm body with
0.8mm pitch.
(in mm)
2. Provides attenuation across a broad frequency range.
Two types of impedance are available which meet
general signal line and high speed signal line.
3. Original inner electrode structure enables extra
low crosstalk.
4. The nickel barrier structure of the external
electrodes provides excellent solder heat
resistance. Both flow and reflow soldering methods
can be employed.
Impedance
(at 100MHz, 20 degree C)
(ohm)
Operating
Rated Current
(mA)
DC Resistance (max.)
(ohm)
Part Number
Temperature Range
(°C)
BLA31AG300SN4
BLA31AG600SN4
BLA31AG121SN4
BLA31AG221SN4
BLA31AG601SN4
BLA31AG102SN4
BLA31BD121SN4
BLA31BD221SN4
BLA31BD471SN4
BLA31BD601SN4
BLA31BD102SN4
30 ±25%
60 ±25%
200
200
150
150
100
50
0.10
0.15
0.20
0.25
0.35
0.45
0.30
0.35
0.40
0.45
0.55
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
120 ±25%
220 ±25%
600 ±25%
1000 ±25%
120 ±25%
220 ±25%
470 ±25%
600 ±25%
1000 ±25%
150
150
100
100
50
Number of Circuits : 4
■ Equivalent Circuit
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
No polarity.
63
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
■ Impedance-Frequency (Typical)
BLA31A Series
BLA31B Series
1200
2000
BLA31AG600SN4
BLA31AG102SN4
900
1500
1000
BLA31AG601SN4
BLA31AG300SN4
BLA31BD102SN4
BLA31AG221SN4
600
BLA31BD601SN4
BLA31AG121SN4
BLA31BD471SN4
BLA31BD221SN4
1
BLA31BD121SN4
300
500
0
0
1
10
100
1000
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
■ Impedance-Frequency Characteristics
BLA31AG300SN4
BLA31AG600SN4
40
80
Z
Z
30
60
40
R
R
20
X
X
10
20
0
0
1
10
100
Frequency (MHz)
1000
1
10
100
1000
Frequency (MHz)
BLA31AG121SN4
BLA31AG221SN4
200
300
150
100
225
150
Z
Z
R
R
X
X
50
0
75
0
1
10
100
1000
1
10
100
Frequency (MHz)
1000
Frequency (MHz)
BLA31AG601SN4
BLA31AG102SN4
1200
800
900
600
600
400
Z
Z
R
R
X
X
300
0
200
0
1
10
100
Frequency (MHz)
1000
1
10
100
1000
Frequency (MHz)
Continued on the following page.
64
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency Characteristics
BLA31BD121SN4
BLA31BD221SN4
500
300
375
250
225
Z
Z
R
X
R
150
1
X
125
0
75
0
1
10
100
1000
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
BLA31BD471SN4
BLA31BD601SN4
1000
800
750
500
600
400
Z
Z
R
R
X
X
250
0
200
0
1
10
100
Frequency (MHz)
1000
1
10
100
1000
Frequency (MHz)
BLA31BD102SN4
2000
1500
1000
Z
R
500
0
X
1
10
100
Frequency (MHz)
1000
65
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr Part Numbering
Chip EMIFILr Capacitor Type
(Global Part Number)
1H
3
L
NF
M
3D CC 102
R
q
w
e
r
t
y
u i o
qProduct ID
yCharacteristics
Product ID
Code
B
Capacitance Change
±10%
NF
Chip EMI Filters Capacitor Type
F
+30/-80%
2
wStructure
R
±15%
Code
Structure
U
-750 ±120ppm/°C
+350 to -1000ppm/°C
M
Capacitor Type
S
eDimensions (LgW)
uRated Voltage
Code
18
Dimensions (LgW)
1.6g0.8mm
EIA
0603
Code
0J
Rated Voltage
6.3V
21
2.0g1.25mm
3.2g1.25mm
4.5g1.6mm
0805
1206
1806
1A
1C
1E
10V
3D
41
16V
25V
1H
2A
50V
rFeatures
100V
Code
CC
Features
iElectrode/Others
Capacitor Type for Signal Lines
Capacitor Type for Large Current
PC
Code
Electrode
3
Sn Plating
tCapacitance
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
oPackaging
Code
Packaging
Plastic Taping (ø180mm Reel)
Bulk
Series
L
B
D
NFM3D/NFM41
All series
Paper Taping (ø180mm Reel)
NFM18/NFM21
66
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Chip EMIFILr Capacitor Array Type
(Global Part Number)
1E
4 B
NF
A
31 CC 101
S
q
w
e
r
t
y
u i o
qProduct ID
yCharacteristics
Product ID
Code
R
Capacitance Change
±15%
NF
Chip EMI Filters Capacitor Type
S
+350 to -1000ppm/°C
wStructure
uRated Voltage
Code
Structure
A
Array Type
Code
1C
Rated Voltage
16V
eDimensions (LgW)
1E
25V
Code
Dimensions (LgW)
3.2g1.6mm
iNumber of Circuits
31
2
Code
Number of Circuits
rFeatures
4
4 Circuits
Code
Features
CC
Capacitor Type for Signal Lines
oPackaging
tCapacitance
Code
B
Packaging
Bulk
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
D
Paper Taping (ø180mm Reel)
67
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Chip EMIFILr RC Combined Type
(Global Part Number)
2
L
NF
R
21 GD 470 470
q
w
e
r
t
y
u i
qProduct ID
yResistance
Expressed by three figures. The unit is in ohm (Ω). The first and
second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
Product ID
NF
EMIFILr
wStructure
uElectrode/Others
Code
Structure
Code
Electrode
R
RC Combined Type
2
Sn Plating
eDimensions (LgW)
iPackaging
Code
Dimensions (LgW)
2.0g1.25mm
EIA
Code
Packaging
Plastic Taping (ø180mm Reel)
Bulk
21
0805
L
2
B
rFeatures
Code
Features
RC Combined Type for Signal Lines
GD
tCapacitance
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
Chip EMIFILr RC Combined Array Type
(Global Part Number)
4 D
NF
A
31 GD 100 101
q
w
e
r
t
y
u i
qProduct ID
yResistance
Expressed by three figures. The unit is in ohm (Ω). The first and
second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures. If
there is a decimal point, it is expressed by the capital letter "R". In
this case, all figures are significant digits.
Product ID
NF
EMIFILr
wStructure
Code
Structure
uNumber of Circuits
A
Array Type
Code
Number of Circuits
eDimensions (LgW)
4
4 Circuits
Code
Dimensions (LgW)
3.2g1.6mm
iPackaging
31
Code
B
Packaging
Bulk
rFeatures
Code
Features
D
Paper Taping (ø180mm Reel)
GD
RC Combined Type for Signal Lines
tCapacitance
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures. If
there is a decimal point, it is expressed by the capital letter "R". In
this case, all figures are significant digits.
68
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Chip EMIFILr LC Combined Type
(Global Part Number)
1E
4
L
NF
W
31 SP 206
X
q
w
e
r
t
y
u i o
qProduct ID
yCharacteristics (NFL/NFW Series)
Product ID
Code
Characteristics
NF
Chip EMI Filters LC Combined Type
X
Cut off Frequency
wStructure
yCharacteristics (NFE Series)
Code
L
Structure
Code
B
Capacitance Change
±10%
Monolithic, LC Combined Type
Winding, LC Combined Type
Block, LC Combined Type
W
C
±20% , ±22%
E
D
+20/-30% , +22/-33%
+20/-55% , +22/-56%
+30/-80% , +22/-82%
±15%
E
eDimensions (LgW)
F
2
Code
18
Dimensions (LgW)
1.6g0.8mm
EIA
0603
0805
1206
2606
R
U
-750 ±120ppm/ ˚C
Other
21
2.0g1.25mm
3.2g1.6mm
Z
31
uRated Voltage
61
6.8g1.6mm
Code
1A
Rated Voltage
10V
rFeatures
Code
SP
Features
1C
16V
π Circuit for Signal Lines
T Circuit for Signal Lines
T Circuit for Large Current
T Circuit for Heavy-duty
1E
25V
ST
1H
50V
PT
2A
100V
HT
iElectrode
Expressed by a figure.
tCut-off Frequency (NFL/NFW Series)
Ex.)
Code
Electrode
Sn Plating
Solder Coating
Others
Series
Expressed by three figures. The unit is in hertz (Hz). The first and
second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
3
4
9
NFL
NFW
NFE
tCapacitance (NFE Series)
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
oPackaging
Code
Packaging
Series
K
L
Plastic Taping (ø330mm Reel)
Plastic Taping (ø180mm Reel)
Bulk
NFW31/NFE
NFW31/NFE
B
D
NFL18/NFL21/NFE
NFL18/NFL21
Paper Taping (ø180mm Reel)
69
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr Capacitor Type NFM18C/NFM21C/NFM3DC/NFM41C Series
NFM18C Series
0.25±0.1
0.4±0.1
0.8±0.1
The NFM18CC series is a 1.6x0.8mm EMI suppression
filter for signal lines which has a 3-terminal
structure using Murata's multilayer technology.
0.2 min.
1.6±0.1
■ Features
1. Ultra small size in 1.6x0.8x0.6mm enable high
(2)
density mounting.
2
(1)
(3)
2. 3-terminal structure with low residual inductance
(ESL)* characteristics achieves large insertion
loss characteristics even in high frequency area.
3. The NFM18cc series covers capacitance range from
22 to 22000pF.
NFM18C
(2)
0.2±0.1
(in mm)
■ Applications
1. EMI suppression of circuit for insertion loss in
quantity.
2. Noise suppression up to GHz.
* Not exceeding one-tenth of monolithic ceramic
capacitors (2-terminal).
Capacitance
(pF)
Rated Voltage
Rated Current
(mA)
Insulation Resistance
(M ohm)
Operating Temperature Range
Part Number
(Vdc)
(°C)
NFM18CC220U1C3
NFM18CC470U1C3
NFM18CC101R1C3
NFM18CC221R1C3
NFM18CC471R1C3
NFM18CC102R1C3
NFM18CC222R1C3
NFM18CC223R1C3
22 +20% ,-20%
47 +20% ,-20%
16
16
16
16
16
16
16
16
300
300
300
300
300
300
300
1000
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
100 +20% ,-20%
220 +20% ,-20%
470 +20% ,-20%
1000 +20% ,-20%
2200 +20% ,-20%
22000 +20% ,-20%
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
(50Ω - 50Ω)
0
10
20
30
40
50
60
70
80
NFM18CC223R1C3
NFM18CC222R1C3
(1) Input
Output (3)
NFM18CC102R1C3
NFM18CC471R1C3
NFM18CC221R1C3
no polarity.
*
NFM18CC101R1C3
NFM18CC470U1C3
NFM18CC220U1C3
GND
(2)
0
1
10
100
1000 2000
Frequency (MHz)
70
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
NFM21C Series
0.3±0.2
The chip "EMIFIL" NFM21C series is a chip type
3-terminal EMI suppression filter. It can reduce
residual inductance to an extremely low level making
it excellent for noise suppression at high frequencies.
0.6±0.2
2.0±0.2
1.25±0.1
■ Features
(2)
1. Small and low profile of 2.0x1.25x0.85mm
(NFM21C) enables high density mounting.
2. 3-terminal structure enables high performance in
high frequency range.
(1)
(3)
NFM21C
(2)
(in mm)
3. Uses original electrode structure which realizes
excellent solderability.
4. An electrostatic capacitance range of 22 to
22000pF enables suppression of noise at specific
frequencies.
2
■ Applications
1. PCs and peripherals which emit high amount of noise
2. Compact size equipment such as PDA, PC card and
mobile telecommunications equipment
3. Severe EMI suppression and high impedance circuits
such as digital circuits
Capacitance
(pF)
Rated Voltage
Rated Current
(mA)
Insulation Resistance
(M ohm)
Operating Temperature Range
Part Number
(Vdc)
(°C)
NFM21CC220U1H3
NFM21CC470U1H3
NFM21CC101U1H3
NFM21CC221R1H3
NFM21CC471R1H3
NFM21CC102R1H3
NFM21CC222R1H3
NFM21CC223R1H3
22 +20% ,-20%
47 +20% ,-20%
50
50
50
50
50
50
50
50
300
300
300
300
300
300
300
2000
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
100 +20% ,-20%
220 +20% ,-20%
470 +20% ,-20%
1000 +20% ,-20%
2200 +20% ,-20%
22000 +20% ,-20%
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
(50Ω - 50Ω)
0
20
NFM21CC220U1H3
NFM21CC470U1H3
NFM21CC101U1H3
NFM21CC221R1H3
NFM21CC471R1H3
40
60
(1) Input
Output (3)
no polarity.
*
GND
NFM21CC223R1H3
NFM21CC222R1H3
(2)
80
NFM21CC102R1H3
100
1
5
10
50
100
500 1000
2000
Frequency (MHz)
71
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
NFM3DC Series
The chip "EMIFIL" NFM3DC series is a chip type
3-terminal EMI suppression filter. It can reduce
residual inductance to an extremely low level making
it excellent for noise suppression at high frequencies.
1.1±0.3
3.2±0.2
(2)
1.25±0.2
■ Feature
(1)
(3)
An electrostatic capacitance range of 22 to 22,000pF
enables suppression of noise at specific frequencies.
(2)
0.3±0.2
(in mm)
NFM3DC
■ Application
1. High noise radiation and high impedance circuits
such as digital circuits
2
Capacitance
(pF)
Rated Voltage
Rated Current
(mA)
Insulation Resistance
(M ohm)
Operating Temperature Range
Part Number
(Vdc)
(°C)
NFM3DCC220U1H3
NFM3DCC470U1H3
NFM3DCC101U1H3
NFM3DCC221R1H3
NFM3DCC471R1H3
NFM3DCC102R1H3
NFM3DCC222R1H3
NFM3DCC223R1H3
22 +50% ,-20%
47 +50% ,-20%
50
50
50
50
50
50
50
50
300
300
300
300
300
300
300
300
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
100 +50% ,-20%
220 +50% ,-20%
470 +50% ,-20%
1000 +50% ,-20%
2200 +50% ,-20%
22000 +50% ,-20%
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
(50Ω - 50Ω)
0
20
NFM3DCC223R1H3
40
(1) Input
Output (3)
NFM3DCC222R1H3
NFM3DCC102R1H3
NFM3DCC471R1H3
60
no polarity.
*
NFM3DCC221R1H3
GND
NFM3DCC101UH3
(2)
NFM3DCC470U1H3
NFM3DCC220U1H3
80
100
1
5
10
50
100
500
1000 2000
Frequency (MHz)
72
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
NFM41C Series
The chip "EMIFIL" NFM41C series is a chip type
3-terminal EMI suppression filter. It can reduce
residual inductance to an extremely low level making
it excellent for noise suppression at high frequencies.
1.5±0.3
4.5±0.3
(2)
1.6±0.3
■ Features
(1)
(3)
An electrostatic capacitance range of 22 to 22,000pF
enables suppression of noise at specific frequencies.
(2)
NFM41C
0.4±0.3
(in mm)
■ Applications
1. High noise radiation and high impedance circuits such
as digital circuits
2
Capacitance
(pF)
Rated Voltage
(Vdc)
Rated Current
(mA)
Insulation Resistance
(M ohm)
Operating Temperature Range
Part Number
(°C)
NFM41CC220U2A3
NFM41CC470U2A3
NFM41CC101U2A3
NFM41CC221U2A3
NFM41CC471R2A3
NFM41CC102R2A3
NFM41CC222R2A3
NFM41CC223R2A3
22 +50% ,-20%
47 +50% ,-20%
100
100
100
100
100
100
100
100
300
300
300
300
300
300
300
300
10000 min.
10000 min.
10000 min.
10000 min.
10000 min.
10000 min.
10000 min.
10000 min.
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
100 +50% ,-20%
220 +50% ,-20%
470 +50% ,-20%
1000 +50% ,-20%
2200 +50% ,-20%
22000 +50% ,-20%
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
(50Ω - 50Ω)
0
20
NFM41CC223R2A3
40
(1) Input
Output (3)
NFM41CC222R2A3
NFM41CC102R2A3
60
NFM41CC471R2A3
NFM41CC221U2A3
NFM41CC101U2A3
NFM41CC470U2A3
NFM41CC220U2A3
no polarity.
*
GND
(2)
80
100
1
5
10
50
100
500
1000 2000
Frequency (MHz)
73
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr Capacitor Array Type NFA31C Series
The NFA31C series is a chip EMI suppression filter for
surface mount applications by using Murata's ceramic
processing technology and filter design technology.
The series is well suited for EMI suppression in
digital I/O lines of varied electronic equipment such
as notebook size PCs.
3.2±0.2
0.8±0.1
1.6±0.2
1.1±0.5
0.4±0.2
(7) (8) (9) (10)
(1)
(2)
0.05 min.
(3) (4) (5) (6)
■ Features
1. High density mounting can be realized because of 4
circuits in one package with 0.8mm pitch.
2. Suitable for high frequency noise suppression
because of low residual inductance of 3-terminal
structure.
2
(in mm)
3. Excellent EMI suppression can be realized because
of 2-terminal simple GNDs for 4 circuits.
4. 20 to 22,000pF lineups can be used depending on
noise frequency.
■ Applications
1. Personal computers and peripherals
2. Telephones, PPCs, communications equipment
3. Digital TVs, VCRs
Capacitance
(pF)
Rated Voltage
(Vdc)
Rated Current
(mA)
Insulation Resistance
Operating Temperature Range
Part Number
(M ohm)
(°C)
NFA31CC220S1E4
NFA31CC470S1E4
NFA31CC101S1E4
NFA31CC221S1E4
NFA31CC471R1E4
NFA31CC102R1E4
NFA31CC222R1E4
NFA31CC223R1C4
22 +20% ,-20%
47 +20% ,-20%
25
25
25
25
25
25
25
16
200
200
200
200
200
200
200
200
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
100 +20% ,-20%
220 +20% ,-20%
470 +20% ,-20%
1000 +20% ,-20%
2200 +20% ,-20%
22000 +20% ,-20%
Number of Circuits : 4
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
(50Ω - 50Ω)
NFA31CC470S1E4
NFA31CC220S1E4
0
Input
(7)
(8)
(9)
(10)
20
NFA31CC223R1C4
40
GND (1)
(2) GND
NFA31CC222R1E4
NFA31CC102R1E4
NFA31CC471R1E4
60
80
NFA31CC221S1E4
NFA31CC101S1E4
(3)
(4)
(5)
(6)
Output
100
1
5
10
50
100
500 1000 2000
No polarity.
Frequency (MHz)
74
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr RC Combined Type NFR21G Series
(Top View)
The NFR21G series comprises high performance EMI
suppression filters which can suppress distortion of
waveform. Various items may be used, considering
circuit impedance and noise condition.
1.0 max.
1.0±0.35
2.0±0.2
0.95±0.35
1.25±0.2
■ Features
(2)
(2)
(Bottom View)
1. Murata's original inner design realizes small and
(1)
(3)
0.3±
low profile of 2.0x1.25x0.5mm.
0.2
0.25
2. Distributed constant circuit realizes smooth change
of impedance which prevents reflection of signal
and distortion of wave shape.
2
(in mm)
3. The NFR21G series is effective in a line where
ground is not stable, because the resistance
element in the filter absorbs noise and returns it to
ground line.
4. The NFR21G series has no polarity so it can be used
in dual direction transport lines.
5. The NFR21G series has various lineups of resistance
(22 to 100ohm) and capacitance (10 to 100pF).
■ Applications
Interface lines and clock lines where signals are tend
to be distorted
Operating
Capacitance
(pF)
Resistance
(ohm)
Rated Current
(mA)
Rated Voltage
(Vdc)
Insulation Resistance
(M ohm)
Part Number
Temperature Range
(°C)
NFR21GD1002202
NFR21GD1004702
NFR21GD4702202
NFR21GD4704702
NFR21GD4706802
NFR21GD4701012
NFR21GD1012202
NFR21GD1014702
NFR21GD1016802
NFR21GD1011012
10 +20% ,-20%
10 +20% ,-20%
47 +20% ,-20%
47 +20% ,-20%
47 +20% ,-20%
47 +20% ,-20%
100 +20% ,-20%
100 +20% ,-20%
100 +20% ,-20%
100 +20% ,-20%
22 +30% ,-30%
47 +30% ,-30%
22 +30% ,-30%
47 +30% ,-30%
68 +30% ,-30%
100 +30% ,-30%
22 +30% ,-30%
47 +30% ,-30%
68 +30% ,-30%
100 +30% ,-30%
50
35
50
35
30
25
50
35
30
25
50
50
50
50
50
50
50
50
50
50
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
Number of Circuits : 1
75
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
■ Equivalent Circuit
(1) Input
Output (3)
GND
(2)
No polarity
■ Insertion Loss Characteristics (Typical)
2
(50Ω - 3kΩ)
NFR21GD4701012
0
10
20
30
40
50
(50Ω - 150Ω)
0
10
20
30
40
50
NFR21GD1002202
NFR21GD1004702
NFR21GD4702202
NFR21GD4704702
NFR21GD4706802
NFR21GD1012202
NFR21GD1014702
NFR21GD1016802
NFR21GD1011012
1
10
100
Frequency (MHz)
1000
1
10
100
Frequency (MHz)
1000
76
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Noise Suppression Effect of NFR21G Series
!Effect of Noise Suppression by NFR21G
The NFR21G is effective even if ground line is not stable
enough due to its distributed constant circuit structure.
[Testing Circuit]
HCU04
HC04
Filter
HC00
15cm
Signal Pattern
10MHz
With Stable Ground Line
Type of Filter
EMI Suppression Effect
Description
60
50
40
30
20
10
Filter
Signal line
2
Ground pattern
Noise Level without Filter
Thru-hole
(connection ground pattern
with ground plane)
Whole surface (back side)
ground plane
30
84
84
84
138
192
246
246
246
300
300
300
Frequency [MHz]
60
50
40
30
20
10
The standard type chip EMIFILr is effective on stable
ground lines.
Filter Mounting Condition
Standard Type Chip EMIFILr
(100pF)
30
138
192
Frequency [MHz]
60
50
40
30
20
10
The NFR21G has some advantages to standard type
EMIFILr on stable ground lines.
Filter Mounting Condition
NFR21GD4701012
30
138
192
Frequency [MHz]
With Poor Ground Line
Type of Filter
EMI Suppression Effect
Description
60
50
40
30
20
10
Filter
Signal line
Ground pattern
Noise Level without Filter
30
84
84
84
138
192
246
246
246
300
300
300
Without ground plane
Frequency [MHz]
60
50
40
30
20
10
The standard type EMIFILr loses efficiency on poor
ground lines.
Filter Mounting Condition
Standard Type Chip EMIFILr
(100pF)
30
138
192
Frequency [MHz]
60
50
40
30
20
10
The NFR21G is effective even on poor ground lines
because of its distributed constant circuit structure and
unique system to limit rush current.
Filter Mounting Condition
NFR21GD4701012
30
138
192
Frequency [MHz]
77
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Noise Suppression Effect of NFR21G Series
!Waveform Distortion Suppressing Function
by NFR21G
[Testing Circuit]
AC04
Filter
AC04
HCU04
Measuring Point
10MHz
Type of Filter
EMI Suppression Effect
Description
Voltage Waveform
Resonance between the internal
capacitance of the IC and the
inductance of the print pattern causes
waveform overshooting and
undershooting.
2
Initial Waveform (no filter)
↑ :1V/div
→ :20ns/div
→ :20ns/div
→ :20ns/div
Voltage Waveform
Ordinary capacitor filters have no
waveform distortion suppressing
capability, and they cannot suppress
disturbances in the waveforms.
When Ordinary Capacitor
Filter is Used
↑ :1V/div
Voltage Waveform
The waveform distortion suppressing
function of the NFR21G minimizes
disturbances of waveforms.
NFR21G
↑ :1V/div
78
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr RC Combined Array Type NFA31G Series
(Top View)
(7) (8)
(9) (10)
NFA31G series is a high performance EMI suppression
(1)
(2)
filter array with a 4-circuit noise filter in
3.2x1.6mm size. NFA31G realizes high density mounting.
(3) (4)
(5) (6)
1.1±0.5
1.6±0.2
0.4±0.15
0.8±0.1
■ Features
1. NFA31G is a 4-circuit noise filter in 3.2x1.6mm
3.2±0.2
(Bottom View)
size with 0.8mm pitch. High density mounting is
available.
2. 3-terminal structure enables excellent high
frequency performance.
2
0.05 min.
(in mm)
0.05 min.
3. Distributed constant circuit realizes smooth change
of impedance which prevents reflection of signal
and distortion of wave shape.
4. NFA31G series is effective in lines where ground
is not stable, because the resistance element in
the filter absorbs noise and returns it to ground
line.
Operating
Capacitance
(pF)
Resistance
(ohm)
Rated Current
(mA)
Rated Voltage
(Vdc)
Insulation Resistance
(M ohm)
Part Number
Temperature Range
(°C)
NFA31GD1006R84
NFA31GD1004704
NFA31GD1001014
NFA31GD4706R84
NFA31GD4704704
NFA31GD4701014
NFA31GD1016R84
NFA31GD1014704
NFA31GD1011014
10 +20% ,-20%
10 +20% ,-20%
10 +20% ,-20%
47 +20% ,-20%
47 +20% ,-20%
47 +20% ,-20%
100 +20% ,-20%
100 +20% ,-20%
100 +20% ,-20%
6.8 +40% ,-40%
47 +30% ,-30%
100 +30% ,-30%
6.8 +40% ,-40%
47 +30% ,-30%
100 +30% ,-30%
6.8 +40% ,-40%
47 +30% ,-30%
100 +30% ,-30%
50
20
15
50
20
15
50
20
15
6
6
6
6
6
6
6
6
6
1000 min
1000 min
1000 min
1000 min
1000 min
1000 min
1000 min
1000 min
1000 min
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
Number of Circuits : 4
■ Equivalent Circuit
Input
(7)
(8)
(4)
(9)
(5)
(10)
(2)GND
(1)GND
(3)
(6)
Output
No polarity
79
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
■ Insertion Loss Characteristics
(50Ω - 50Ω)
(50Ω - 50Ω)
0
0
10
20
30
40
50
10
NFA31GD1006R84
NFA31GD1004704
NFA31GD4704704
NFA31GD4706R84
20
NFA31GD1014704
NFA31GD1016R84
30
40
50
1
10
1000
2000
100
Frequency (MHz)
1
10
1000
2000
100
Frequency (MHz)
2
(50Ω - 50Ω)
0
10
20
30
40
50
NFA31GD1001014
NFA31GD4701014
NFA31GD1011014
1
10
1000
2000
100
Frequency (MHz)
80
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr LC Combined Monolithic Type NFL18ST/NFL18SP/NFL21S Series
NFL18ST Series
0.2 min.
0.2 min.
Ths NFL18ST series is an EMI suppression filter for
high speed signal lines, achieving T-type structure in
1.6x0.8mm size with Murata's multilayer technology.
(2)
(2)
(1)
(3)
0.25±0.1
0.25±0.1
■ Features
0.8±0.1
0.4±0.1
1.6±0.1
1. Ultra-small size in 1.6x0.8x0.8mm
2. Steep insertion loss characteristics realize
excellent noise suppression and prevent distortion
of signal waveform.
2
3. By minimizing stray capacitance of inductor,
achieves high performance in noise suppression
in high frequency range.
(in mm)
4. Five different values of cut-off frequency are
available, ranging from 100MHz up to 500MHz.
5. No polarity using the same structure on all the
side electrodes.
■ Applications
Noise suppression for video signal lines (RGB lines)
and high speed clock lines
Rated
Voltage
(Vdc)
Rated
Current
(mA)
Insulation
Resistance
(M ohm)
Operating
Cut-off Frequency
(MHz)
Capacitance
(pF)
Inductance
(nH)
Part Number
Temperature Range
(°C)
NFL18ST107X1C3
NFL18ST157X1C3
NFL18ST207X1C3
NFL18ST307X1C3
NFL18ST507X1C3
100
150
200
300
500
40 +20% ,-20%
32 +20% ,-20%
25 +20% ,-20%
18 +20% ,-20%
10 +20% ,-20%
175 +20% ,-20%
140 +20% ,-20%
110 +20% ,-20%
62 +20% ,-20%
43 +20% ,-20%
16
16
16
16
16
100
100
150
200
200
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
Number of Circuits : 1
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
(50Ω - 50Ω)
0
20
40
60
80
NFL18ST507X1C3
NFL18ST307X1C3
Input
(1)
Output
(3)
NFL18ST207X1C3
NFL18ST157X1C3
NFL18ST107X1C3
GND
(2)
No Polarity
1
5
10
50 100
500 1000
5000
Frequency (MHz)
81
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
NFL18SP Series
0.15±0.1
The chip "EMIFIL" NFL18SP series is an EMI
suppression filter for high speed signal lines,
achieving pi-type structure in 0603 size with Murata's
multilayer technology.
1.6±0.1
0.2 min.
■ Features
1. Ultra-small size in 1.6x0.8x0.6 mm
2. Achieves high performance in noise suppression over
wide frequency range.
0.4±0.1
0.3±0.1
0.3±0.1
0.15±0.1
0.15±0.1
3. Steep insertion loss characteristics realize
excellent noise suppression and prevent distortion
of signal waveform.
(in mm)
4. Line up 4 items of cut-off frequency range from 150
to 500MHz.
2
■ Applications
EMI suppression for digital signal line such as RGB
and high speed clock lines
Rated
Voltage
(Vdc)
Rated
Current
(mA)
Insulation
Resistance
(M ohm)
Operating
Cut-off Frequency
(MHz)
Capacitance
(pF)
Inductance
(nH)
Part Number
Temperature Range
(°C)
NFL18SP157X1A3
NFL18SP207X1A3
NFL18SP307X1A3
NFL18SP507X1A3
150
200
300
500
34 +20% ,-20%
24 +20% ,-20%
19 +20% ,-20%
11 +20% ,-20%
100 +20% ,-20%
80 +20% ,-20%
60 +20% ,-20%
38 +20% ,-20%
10
10
10
10
100
100
100
100
1000 min.
1000 min.
1000 min.
1000 min.
-55 to 125
-55 to 125
-55 to 125
-55 to 125
Number of Circuits : 1
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
50-50Ω
0
10
20
30
40
50
60
70
NFL18SP157X1A3
NFL18SP207X1A3
NFL18SP307X1A3
NFL18SP507X1A3
(1) Input
Output (3)
GND
(2)
No polarity.
1
10
100
Frequency (MHz)
1000 2000
82
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
NFL21S Series
0.3±0.2
The chip "EMIFIL" NFL21S series is a high performance
EMI suppression filter in 2.0x1.25mm size for high
speed signal lines by using Murata's processing
technology.
0.6±0.2
2.0±0.2
■ Features
(2)
1. Suppresses noise with few effects on the signal
itself due to its steep filtering characteristics.
2. Murata's original internal structure design enables
excellent noise suppression up to high frequencies.
3. Available in nine different values of cut-off
frequency ranging from 20MHz up to 500MHz.
(1)
(3)
0.05 min.
(2)
(in mm)
2
■ Applications
Suppression of high magnitude radiated noise generated
by high speed digital circuits such as clock and RGB
Rated
Voltage
(Vdc)
Rated
Current
(mA)
Insulation
Resistance
(M ohm)
Operating
Cut-off Frequency
(MHz)
Capacitance
(pF)
Inductance
(nH)
Part Number
Temperature Range
(°C)
NFL21SP206X1C3
NFL21SP506X1C3
NFL21SP706X1C3
NFL21SP107X1C3
NFL21SP157X1C3
NFL21SP207X1C3
NFL21SP307X1C3
NFL21SP407X1C3
NFL21SP507X1C3
20
50
240 +20% ,-20%
84 +20% ,-20%
76 +20% ,-20%
44 +20% ,-20%
28 +20% ,-20%
22 +20% ,-20%
19 +10% ,-10%
16 +10% ,-10%
12 +10% ,-10%
700 +20% ,-20%
305 +20% ,-20%
185 +20% ,-20%
135 +20% ,-20%
128 +20% ,-20%
72 +20% ,-20%
45 +10% ,-10%
34 +10% ,-10%
31 +10% ,-10%
16
16
16
16
16
16
16
16
16
100
150
150
200
200
250
300
300
300
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
70
100
150
200
300
400
500
Number of Circuits : 1
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
(50Ω - 50Ω)
0
NFL21SP507X1C3
NFL21SP407X1C3
NFL21SP307X1C3
NFL21SP207X1C3
NFL21SP157X1C3
NFL21SP107X1C3
(1) Input
Output (3)
20
40
NFL21SP706X1C3
NFL21SP506X1C3
NFL21SP206X1C3
GND
(2)
60
80
No polarity.
1
5
10
50
100
500 1000 2000
Frequency (MHz)
83
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr LC Combined Winding Type NFW31S Series
2.3±0.2
The signal line chip EMI filter NFW31S series consists
of high performance EMI suppression filters. They are
designed for noise suppression in high speed signal
digital circuits in which the signal harmonics are
1.6±0.2
3.2±0.3
prone to becoming noise sources. These filters achieve
(3)
(1)
(2)
a 100dB/dec. (typ.) damping characteristic with
Murata's innovative circuit design. This makes these
chips effective in applications where the signal and
noise frequencies are close to each other.
(1) : Input electrode
(2) : Ground electrode
(3) : Output electrode
No polarity.
0.7±0.3
0.7±0.3
2
0.65±0.2
(in mm)
■ Features
1. Suppresses signal noise with little or no
attenuation of the signal itself.
2. Murata's original internal structure design enables
excellent noise suppression up to high frequencies
(40dB at 1GHz typ.).
3. The NFW31S series is available in six different
values of cut-off frequency ranging from 10MHz up
to 500MHz.
Nominal Cut-off Attenuation Attenuation Attenuation Attenuation Attenuation Attenuation Attenuation Attenuation Attenuation Attenuation
Part Number
Freq.
at 10MHz
(dB)
at 20MHz
(dB)
at 50MHz
(dB)
at 100MHz
(dB)
at 150MHz
(dB)
at 200MHz
(dB)
at 300MHz
(dB)
at 400MHz
(dB)
at 500MHz at 1000MHz
(MHz)
(dB)
(dB)
NFW31SP106X1E4
NFW31SP206X1E4
NFW31SP506X1E4
NFW31SP107X1E4
NFW31SP157X1E4
NFW31SP207X1E4
NFW31SP307X1E4
NFW31SP407X1E4
NFW31SP507X1E4
10
20
6 max.
5 min.
25 min.
25 min.
-
25 min.
-
-
30 min.
30 min.
-
-
-
-
-
-
-
-
6 max.
5 min.
25 min.
-
25 min.
-
-
30 min.
30 min.
20 min.
30 min.
10 min.
5 min.
-
30 min.
30 min.
30 min.
30 min.
30 min.
15 min.
10 min.
10 min.
50
-
-
-
-
-
-
-
6 max.
10 min.
-
30 min.
-
-
100
150
200
300
400
500
-
-
-
-
-
-
6 max.
-
5 min.
-
-
-
-
-
-
-
6 max.
-
10 min.
20 min
-
-
-
-
6 max.
-
-
-
-
-
6 max.
-
-
-
6 max.
-
6 max.
Rated Current : 200mA
Rated Voltage : 25Vdc
Operating Temperature Range : -40°C to 85°C
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
(50Ω - 50Ω)
0
NFW31SP157X1E4
NFW31SP207X1E4
20
(1) Input
Output (3)
NFW31SP307X1E4
NFW31SP407X1E4
NFW31SP507X1E4
40
NFW31SP106X1E4
NFW31SP206X1E4
NFW31SP506X1E4
NFW31SP107X1E4
GND
(2)
60
80
No polarity.
1
5
10
50
100
500 1000 2000
Frequency (MHz)
84
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Noise Suppression Effect of NFW31S Series
!Example of EMI Suppression
in an Actual Circuit
[Measuring Circuit]
EMI
74ALS04
10MHz
74ALS00
Suppression Filter
Measuring
Point
20ns/div
1v/div
Type of Filter
Signal Wave Form
EMI Suppression Effect
Description
(
)
100
80
60
40
20
0
2
Signal Waveform
and Noise Spectrum
before Filter Mounting
100
200
300
400
500
[
]
Frequency MHz
Signal Waveform 20ns/div
Noise Spectrum
(10:1 Active Probe)
(
)
1V/div
The NFW31S's steep attenuation
characteristic means excellent EMI
suppression without waveform
cornering.
100
80
60
40
20
0
Level before
filter mounting
NFW31S Series
(Cut-off frequency 50MHz)
100
200
300
400
400
400
500
500
500
Frequency [MHz]
3-terminal capacitors suppress
signal frequencies as EMI
frequencies so the signal waveform
is distorted.
100
80
60
40
20
0
Level before
filter mounting
Conventional Chip
Solid type EMI Filter
(NFM41CC 470pF)
100
200
300
Frequency [MHz]
Combinations of inductors and
capacitors can yield a steep
attenuation characteristic, but they
require a great deal more mounting
space.
Moreover, at high frequencies the
EMI suppression is less than that
obtained by the NFW31S.
Filter Combined
with Conventional LCs
100
80
60
40
20
0
Level before
filter mounting
L
L
C
L : Chip Inductor
C : Chip Capacitor
(270pF)
100
200
300
Frequency [MHz]
85
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr LC Combined Type for Large Current NFE31P/NFE61P/NFE61H Series
NFE31P Series
0.7±0.2
0.7±0.2
The chip "EMIFIL" NFE31P is a small size T-type circuit
EMI suppression filter.
1.0±0.2
(1)
(2)
(3)
■ Features
1. Its large rated current of 6A and low voltage drop
due to small DC resistance are suitable for DC
power line use.
1.6±0.2
3.2±0.4
2
2. The feedthrough capacitor realizes excellent high
frequency characteristics.
3. The structure incorporates built-in ferrite beads
which minimize resonance with surrounding circuits.
4. 22 to 22,000pF lineups can be used for signal lines.
(in mm)
Capacitance
(pF)
Rated Voltage
Rated Current
(A)
Insulation Resistance
(M ohm)
Operating Temperature Range
Part Number
(Vdc)
(°C)
NFE31PT220R1E9
NFE31PT470C1E9
NFE31PT101C1E9
NFE31PT221D1E9
NFE31PT471F1E9
NFE31PT152Z1E9
NFE31PT222Z1E9
22 +30% ,-30%
47 +50% ,-20%
100 +80% ,-20%
220 +50% ,-20%
470 +50% ,-20%
1500 +50% ,-20%
2200 +50% ,-50%
25
25
25
25
25
25
25
6
6
6
6
6
6
6
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
(50Ω - 50Ω)
NFE31PT220R1E9
NFE31PT470C1E9
0
10
NFE31PT101C1E9
20
NFE31PT221D1E9
Input
(1)
Output
(3)
NFE31PT471F1E9
NFE31PT152Z1E9
NFE31PT222Z1E9
30
40
50
GND
(2)
No polarity.
1
10
100
1000
2000
Frequency (MHz)
86
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
NFE61P Series
The chip "EMIFIL" NFE61P is a T-type circuit EMI
suppression filter.
0.7±0.2
2.6±0.3
0.7±0.2
(1)
(2)
(3)
■ Feature
1. Its large rated current of 2A and low voltage drop
due to small DC resistance are suitable for DC
power line use.
6.8±0.5
1.6±0.3
2. The feedthrough capacitor realizes excellent high
frequency characteristics.
3. The structure incorporates built-in ferrite beads
which minimize resonance with surrounding circuits.
4. 33 to 4,700pF lineups can be used for signal lines.
(in mm)
2
Capacitance
(pF)
Rated Voltage
Rated Current
(A)
Insulation Resistance
(M ohm)
Operating Temperature Range
Part Number
(Vdc)
(°C)
NFE61PT330B1H9
NFE61PT680B1H9
NFE61PT101Z1H9
NFE61PT181B1H9
NFE61PT361B1H9
NFE61PT681B1H9
NFE61PT102E1H9
NFE61PT472C1H9
33 +30% ,-30%
68 +30% ,-30%
100 +30% ,-30%
180 +30% ,-30%
360 +20% ,-20%
680 +30% ,-30%
1000 +80% ,-20%
4700 +80% ,-20%
50
50
50
50
50
50
50
50
2
2
2
2
2
2
2
2
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
(50Ω - 50Ω)
0
NFE61PT330B1H9
NFE61PT680B1H9
NFE61PT101Z1H9
10
20
30
40
50
60
NFE61PT181B1H9
NFE61PT361B1H9
NFE61PT681B1H9
NFE61PT102E1H9
NFE61PT472C1H9
Input
(1)
Output
(3)
GND
(2)
No polarity.
0.1
1
10
100
1000
Frequency (MHz)
87
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
NFE61H Series
The T-type chip EMI Filter NFE61H series consists of
a feedthrough capacitor and ferrite beads.
Extending the operating conditions of NFE61P, NFE61H
series can be used in an application set under severe
operating conditions.
0.7±0.2
2.6±0.3
0.7±0.2
(1)
(2)
(3)
+0.3
6.8
1.6±0.3
-0.5
■ Features
1. These filters have an extended operating
temperature range of -55 to +125 degree C.
2. Its large rated current of 2A and low voltage drop
due to small DC resistance are suitable for DC
power line use.
(in mm)
3. The feedthrough capacitor realizes excellent high
frequency characteristics.
2
4. The structure incorporates built-in ferrite beads
which minimize resonance with surrounding circuits.
5. 33 to 3,300pF lineups can be used for signal lines.
Capacitance
(pF)
Rated Voltage
(Vdc)
Rated Current
(A)
Insulation Resistance
(M ohm)
Operating Temperature Range
Part Number
(°C)
NFE61HT330U2A9
NFE61HT680R2A9
NFE61HT101Z2A9
NFE61HT181C2A9
NFE61HT361C2A9
NFE61HT681D2A9
NFE61HT102F2A9
NFE61HT332Z2A9
33 +30% ,-30%
68 +30% ,-30%
100 +30% ,-30%
180 +30% ,-30%
360 +20% ,-20%
680 +30% ,-30%
1000 +80% ,-20%
3300 +80% ,-20%
100
100
100
100
100
100
100
100
2
2
2
2
2
2
2
2
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
(50Ω - 50Ω)
0
10
20
30
40
NFE61HT330U2A9
NFE61HT680R2A9
NFE61HT101Z2A9
NFE61HT181C2A9
Input
(1)
Output
(3)
NFE61HT361C2A9
NFE61HT681D2A9
NFE61HT102F2A9
NFE61HT332Z2A9
GND
(2)
50
60
No polarity.
0.1
1
10
100
1000
Frequency (MHz)
88
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIFILr for Large Current NFM18P/21P/3DP/41P Series
NFM18P Series
0.2 min.
0.2 min.
The NFM18P series is an EMI suppression filter for
high speed IC power lines which realizes large
capacitance 1 microF max. and rated current 2A in 1608
size by Murata's multilayer technology.
(2)
(1)
(3)
(2)
0.25±0.1
0.25±0.1
0.8±0.1
0.4±0.1
1.6±0.1
■ Features
1. Ultra-small size in 1.6x0.8mm.
2. 3-terminal structure with low residual (ESL)* and
large capacitance 1 microF (max.) realize large
insertion loss characteristics over wide frequency
range.
2
NFM18P (1 micro F)
(in mm)
3. Large rated current 2A is suitable for noise
suppression of circuits which require large current.
4. The NFM18P series has line up of capacitance 0.1 to
1.0 microF.
0.25±0.1
0.4±0.1
0.8±0.1
* Not exceeding one-tenth of monolithic ceramic
capacitors (2-terminal).
0.2 min.
1.6±0.1
■ Applications
(2)
1. Noise suppression for large capacitance circuits such
(1)
(3)
as high speed IC power lines
2. Control change of voltage for high speed IC
NFM18P (0.1-0.47 micro F)
(2)
0.2±0.1
(in mm)
Capacitance
Rated Voltage
(Vdc)
Rated Current
(A)
Insulation Resistance
(M ohm)
Operating Temperature Range
Part Number
(µF)
(°C)
NFM18PC104R1C3
NFM18PC224R0J3
NFM18PC474R0J3
NFM18PC105R0J3
0.1 +20% ,-20%
0.22 +20% ,-20%
0.47 +20% ,-20%
1.0 +20% ,-20%
16
6.3
6.3
6.3
2
2
2
2
1000 min.
1000 min.
1000 min.
500 min.
-55 to 125
-55 to 125
-55 to 125
-55 to 105
■ Equivalent Circuit
■ Insertion Loss Characteristics
NFM18P Series
(50Ω - 50Ω)
0
10
NFM18PC104R1C3
20
NFM18PC224R0J3
30
40
50
60
70
80
90
NFM18PC474R0J3
NFM18PC105R0J3
(1) Input
Output (3)
no polarity.
*
GND
(2)
0.1
1
10
Frequency (MHz)
100
1000 2000
89
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
NFM21P Series
0.3±0.2
NFM21P is a 3-terminal structure component. This product
can be applied to large current DC power lines. NFM21P
is suitable for noise suppression of DC power lines
where relatively operates large current.
0.6±0.2
2.0±0.2
1.25±0.1
(2)
■ Features
1. The rated current of 4A is suitable for IC's
(1)
(3)
individual power lines.
2. Small dimension enables higher density packaging.
NFM21P is much smaller size (2.0x1.25x0.85mm).
3. Murata's original internal electrode structure
design realizes excellent EMI suppression
effects from low frequency to high frequency.
NFM21P
(2)
(in mm)
2
Capacitance
Rated Voltage
(Vdc)
Rated Current
(A)
Insulation Resistance
(M ohm)
Operating Temperature Range
Part Number
(µF)
(°C)
NFM21PC104R1E3
NFM21PC224R1C3
NFM21PC474R1C3
NFM21PC105B1A3
NFM21PC105F1C3
0.1 +20% ,-20%
0.22 +20% ,-20%
0.47 +20% ,-20%
1.0 +20% ,-20%
1.0 +80% ,-20%
25
16
16
10
16
2
2
2
4
2
1000 min.
1000 min.
1000 min.
500 min.
500 min.
-55 to 125
-55 to 125
-55 to 125
-40 to 85
-40 to 85
■ Equivalent Circuit
■ Insertion Loss Characteristics
NFM21P Series
(50Ω - 50Ω)
0
20
40
NFM21PC104R1E3
NFM21PC224R1C3
(1) Input
Output (3)
60
no polarity.
*
GND
NFM21PC474R1C3
(2)
80
NFM21PC105F1C3
NFM21PC105B1A3
100
1
10
100
Frequency (MHz)
1000 2000
90
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
NFM3DP Series
The chip "EMIFIL" NFM3DP is a chip type
3-terminal capacitor with high rated current of 2A.
This series is suited for noise suppression in DC
power supply lines of digital instruments.
1.1±0.3
3.2±0.2
(2)
1.25±0.2
■ Features
(1)
(3)
1. Large rated current (2A) is suitable for application
in DC power lines.
(2)
0.3±0.2
(in mm)
2. Small size (3.2x1.25mm) and low profile (0.7mm max.)
NFM3DP
■ Applications
1. Personal computers, word processors and peripherals
2. Telephones, PPCs, communications equipment, etc.
3. Digital TVs, VCRs
2
4. Telecommunications equipment
Capacitance
Rated Voltage
(Vdc)
Rated Current
(A)
Insulation Resistance
(M ohm)
Operating Temperature Range
Part Number
(µF)
(°C)
NFM3DPC223R1H3
0.022 +20% ,-20%
50
2
1000 min.
-55 to 85
■ Equivalent Circuit
■ Insertion Loss Characteristics
NFM3DP
(50Ω - 50Ω)
0
20
40
(1) Input
Output (3)
60
80
no polarity.
*
GND
(2)
100
0.1
0.5
1
5
10
50 100
500 1000
Frequency (MHz)
■ Notice (Rating)
When the NFM3DP series is used in operating temperatures
exceeding +85°C, derating of current is necessary.
Please apply the derating curve shown below according to
the operating temperature.
2.0
0.5
0
-55
85
Operating Temperature (˚C)
125
91
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
NFM41P Series
The chip "EMIFIL" NFM41P series consists of 3-terminal
structure SMT components. These components are able to
be applied to large current DC power lines. NFM41P
series are suitable in noise suppression in DC lines
where relatively large currents operate.
1.5±0.3
4.5±0.3
(2)
1.6±0.3
■ Features
(1)
(3)
1. Large rated current (2A) is suitable for the
(2)
application in DC power lines.
NFM41P
0.4±0.3
2. High electrostatic capacitance and remarkable high
frequency performance are effective for immunity
against surge noise and pulse noise.
(in mm)
2
■ Applications
1. Personal computers, word processors and peripherals
2. Telephones, PPCs, communications equipment, etc.
3. Digital TVs, VCRs
4. Telecommunications equipment
Capacitance
Rated Voltage
(Vdc)
Rated Current
(A)
Insulation Resistance
(M ohm)
Operating Temperature Range
Part Number
(µF)
(°C)
NFM41PC204F1H3
0.2 +80% ,-20%
50
2
1000 min.
-55 to 85
■ Equivalent Circuit
■ Insertion Loss Characteristics
NFM41P
(50Ω - 50Ω)
0
20
40
(1) Input
Output (3)
60
no polarity.
*
GND
(2)
80
100
1
5
10
50
100
500 1000
Frequency (MHz)
92
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIGUARDr (EMIFILr with Varistor Function) Part Numbering
Chip EMIGUARDr (EMIFILr with Varistor Function)
(Global Part Number)
1C
L
VF
M
41
R
N
222
N
q
w
e
r
t
y
u
i
o
qProduct ID
yCapacitance
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
Product ID
VF
Chip EMIGUARDr
wStructure
uCapacitance Tolerance
Code
Structure
Code
Capacitance Tolerance
M
Monolithic Type
N
±30%
eDimensions (LgW)
iRated Voltage
Code
Dimensions (LgW)
4.5g1.6mm
EIA
Code
Rated Voltage
41
1806
1C
16V
3
rOuter Electrode
oPackaging
Code
Outer Electrode
Code
Packaging
Plastic Taping (ø180mm Reel)
Bulk
R
Standard Type
L
B
tCategory
Code
Category
N
Standard
93
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip EMIGUARDr (EMIFILr with Varistor Function) VFM41R Series
■ Features
0.4±0.3
0.4±0.3
1.4±0.3
The VFM41R series is a chip type EMI filter with
varistor function. Its 3-terminal structure provides
high performance by suppressing high frequency noise
and absorbing surge noise. VFM41R can meet both EMI
noise and surge noise.
(2)
(1)
(3)
(2)
4.5±0.3
■ Applications
in mm
ESD surge protection and EMI suppression in various
electric equipment such as car electronic equipment,
portable electronic equipment, telecommunication
terminals, office automation equipment, home
automation equipment or factory automation equipment
Rated
Voltage
(Vdc)
Rated
Current
(mA)
Peak
Pulse Current
(A)
Operating
Varistor Voltage Clumping Voltage
Capacitance
(pF)
Part Number
Temperature Range
(V)
(max.)
(°C)
VFM41RN222N1C
16
27 +5V,-5V
50V(V2A)
2200 +30% ,-30%
200
50
-40 to 125
3
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
■ Insertion Loss Characteristics
(50Ω - 50Ω)
0
20
40
(1) Input
Output (3)
GND
(2)
60
80
No polarity
1
5
10
50
100
500
1000
Frequency (MHz)
94
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Noise Suppression Effect of VFM Series
!Impulse Noise Absorption
(Comparison between VFM41R and Standard 2-terminal Varistor)
[TESTING CIRCUIT]
Oscilloscope
50Ω
Sample
Attenuator
Impulse Generator
(Zo=50Ω)
(Pulse Width 100ns)
Type of Filter
EMI Suppression Effect
Description
The Lower chart is a frequency
Voltage Waveform
response of the upper chart. Note that
the scale of original wave chart and that
of the output wave chart is different
because of circumstances.
2225
1675
1125
575
25
–50
0
50
100
150
200
Time [ns]
Original Waveform
30
20
Frequency Spectrum
10
3
0
–10
–20
10MHz
990MHz
Frequency [LINEAR]
Final voltage falls below 0V because of the effect of signal reflection.
The rising part of pulse, which is mostly
consists of high-frequency element,
remains because inductance in
electrodes becomes obstacle.
Voltage Waveform
300
200
100
0
174V peak
The commonly used
2-terminal varistor
–100
–50
0
50
100
150
200
Time [ns]
30
20
Frequency Spectrum
10
0
–10
–20
10MHz
990MHz
Frequency [LINEAR]
The 3-terminal structure minimizes the
effect of inductance in electrodes and
pulse rising noise is absorbed
completely.
Voltage Waveform
300
200
100
0
76V peak
–100
–50
r
Chip Solid EMIGUARD VFM41R
0
50
100
150
200
Time [ns]
30
20
10
0
Frequency Spectrum
–10
–20
10MHz
990MHz
Frequency [LINEAR]
95
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip Common Mode Choke Coils Part Numbering
Chip Common Mode Choke Coils
(Global Part Number)
Q
2
L
DL
W
21
S
N
371
S
q
w
e
r
t
y
u
i o !
qProduct ID
tCategory
Product ID
Code
Category
DL
Chip Common Mode Choke Coils
N
Standard Type
wStructure
yImpedance
Typical impedance at 100MHz is expressed by three figures. The
unit is in ohm (Ω). The first and second figures are significant
digits, and the third figure expresses the number of zeros which
follow the two figures.
Code
W
Structure
Winding Type
Monolithic Type
Film Type
M
P
uCircuit
eDimensions (LgW)
Ex.)
Code
S
Circuit
Series
except DLP31D
DLP31D
Code
11
Dimensions (LgW)
1.25g1.0mm
2.0g1.2mm
EIA
Standard Type
0504
0805
1206
1008
2014
2020
M
21
iFeatures
31
3.2g1.6mm
2H
5A
5B
2.5g2.0mm
Code
Features
5.0g3.6mm
L
Q
Z
5.0g5.0mm
Expressed by a letter.
rType
4
oNumber of Signal Line
Code
S
Type
Magnetically Shielded One Circuit Type
Magnetically Shielded Two Circuit Type
Open Magnetic One Circuit Type
Code
Number of Signal Line
Two Lines
D
2
3
4
H
Three Lines
G
Magnetically Monolithic Type (sectional winding)
Four Lines
!Packaging
Code
Packaging
Plastic Taping (ø330mm Reel)
Plastic Taping (ø180mm Reel)
Bulk
Series
K
L
DLW5AH/DLW5BS
All series
B
All series
96
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip Common Mode Choke Coils Film Type DLP11S/DLP31S Series
DLP11S Series
0.3±0.1
■ Features
1. Small size and tight dimensional tolerance
SIZE : 1.25x1.0x0.82mm tolerance : +/-0.1mm
2. Useful impedance line-up 90/120/160/200ohm
0.55±0.1
(4)
(1)
3. High noise suppression for high frequency
4. No distortion to high-speed signal transmission
■ Applications
Common mode noise suppression of high speed
differential signal lines for USB, IEEE1394, LVDS.
1. Note PC, PDA
(3)
(2)
(in mm)
1.0±0.1
2. Cellular phone
3. Digital Still Camera, Digital Video Camera
Common Mode Impedance
(at 100MHz, 20 degree C)
(ohm)
Rated Current Rated Voltage Insulation Resistance Withstand Voltage DC Resistance
Part Number
(mA)
(Vdc)
(M ohm)
(Vdc)
(ohm)
DLP11SN900SL2
DLP11SN121SL2
DLP11SN161SL2
DLP11SN201SL2
90 ±20%
120 ±20%
160 ±20%
200 ±20%
160
140
120
130
5
5
5
5
100 min.
100 min.
100 min.
100 min.
12.5
12.5
12.5
12.5
1.4 ±25%
2.0 ±25%
2.7 ±25%
2.5 ±25%
Operating Temperature Range : -40°C to 85°C
4
■ Equivalent Circuit
■ Impedance-Frequency Characteristics
10000
Common mode
DLP11SN201SL2
DLP11SN161SL2
1000
100
10
(1)
(2)
DLP11SN121SL2
DLP11SN900SL2
DLP11SN900SL2
DLP11SN121SL2
DLP11SN161SL2
Differential mode
1000 10000
DLP11SN201SL2
(3)
(4)
1
1
10
100
Frequency (MHz)
No polarity
97
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
DLP31S Series
(4)
(3)
(1)
(2)
DLP31S series is chip common mode choke coil that
realizes high impedance in a small size with ferrite
material technology and film processing technology.
DLP31S series has excellent performance at high
frequency range. It is suitable for differential
signal line application.
■ Features
(2.1)
1. Small size, low profile, SMD. 3.2x1.6x1.15mm
0.7±0.2
3.2±0.15
(tolerance: 0.15mm)
(in mm)
2. High common mode impedance (550ohm at
100MHz typ.) in small size.
3. DLP31S suppresses high frequency noise that was
unable to be suppresses with existing common mode
choke coils. Suitable for differential signal lines
as like USB, because DLP31S does not provide
distortion to high speed signal transmission due to
its high coupling (coupling coefficient: 0.98 min.)
■ Applications
1. USB lines of PC, peripheral equipment.
2. LVDS lines of Note-PC, LCD.
3. USB lines of digital AV equipment such as digital
cameras.
Common Mode Impedance
(at 100MHz, 20 degree C)
(ohm)
Rated Current Rated Voltage Insulation Resistance Withstand Voltage DC Resistance
Part Number
(mA)
(Vdc)
(M ohm)
(Vdc)
(ohm)
DLP31SN121SL2
DLP31SN221SL2
DLP31SN551SL2
120 ±20%
220 ±20%
550 ±20%
100
100
100
16
16
16
100 min.
100 min.
100 min.
40
40
40
2.0 max.
2.5 max.
3.6 max.
4
Operating Temperature Range : -40°C to 85°C
■ Equivalent Circuit
■ Impedance-Frequency Characteristics
10000
1000
(1)
(2)
DLP31SN551SL2
DLP31SN221SL2
DLP31SN121SL2
100
(Common mode)
10
(3)
(4)
DLP31SN121SL2
DLP31SN221SL2
(Differential mode)
DLP31SN551SL2
No polarity
1
1
10
100
1000
Frequency (MHz)
98
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip Common Mode Choke Coils Arrays Film Type DLP31D Series
DLP31D Series
0.4±0.2
DLP31D series is chip common mode choke coil array
which realizes high coupling and high impedance in a
small size with ferrite material technology and thin
0.8±0.1
0.4±0.2
film processing technology.
0.3±0.2
(1)
(2)
(3)
(4)
■ Features
1. 2 components are included in 3.2x1.6mm
2. Thin type 1.15mm
3. High common mode Impedance characteristics
(max. 440ohm, at 100MHz)
(5)
(6)
3.2±0.15
(8)
(7)
(in mm)
4. The DLP31D can suppress common mode noise without
damage to signal wave.
■ Applications
Common mode noise suppression of high speed
differential signal lines for USB, IEEE1394, LVDS.
1. Main board of personal computer, note PC
2. Printer, Scanner
3. LCD monitor
4. Game equipment
5. PC peripheral equipment
Common Mode Impedance
(at 100MHz, 20 degree C)
(ohm)
4
Rated Current Rated Voltage Insulation Resistance Withstand Voltage DC Resistance
Part Number
(mA)
(Vdc)
(M ohm)
(Vdc)
(ohm)
DLP31DN900ML4
DLP31DN131ML4
DLP31DN201ML4
DLP31DN321ML4
DLP31DN441ML4
90 ±20%
130 ±20%
200 ±20%
320 ±20%
440 ±20%
160
120
100
80
10
10
10
10
10
100 min.
100 min.
100 min.
100 min.
100 min.
25
25
25
25
25
1.1 max.
1.6 max.
2.2 max.
3.5 max.
4.3 max.
70
Operating Temperature Range : -40°C to 85°C
■ Equivalent Circuit
■ Impedance-Frequency Characteristics
10000
(1)
(2)
(3)
(4)
Common mode
DLP31DN471SL4
1000
DLP31DN361SL4
DLP31DN201SL4
DLP31DN161SL4
100
DLP31DN900SL4
10
DLP31DN900SL4
DLP31DN161SL4
DLP31DN201SL
DLP31DN361SL4
DLP31DN471SL4 Differential mode
(5)
(6)
(7)
No polarity
(8)
1
1
10
100
1000
Frequency (MHz)
99
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip Common Mode Choke Coils Monolithic Type DLM2HG Series
(1)
(3)
(5)
DLM2HG Series is a high quality noise suppression
filter for headphone lines of high quality digital
music equipment.
■ Features
(2)
(4)
(6)
1. Low distortion in audio signal, Low crosstalk.
2. Effective in noise suppression both of common mode
and of differential mode.
2.0±0.2
3. Small size, low profile, SMD 2.5x2.0x1.2mm
0.4±0.2
0.8±0.1
(in mm)
■ Application
1. Headphone lines of digital music equipment such as
DVD, MD player.
2. Headphone lines of Note-PC, PDA
Common Mode Impedance
(at 100MHz, 20 degree C)
(ohm)
Rated Current Rated Voltage Insulation Resistance Withstand Voltage DC Resistance
Part Number
(mA)
(Vdc)
(M ohm)
(Vdc)
(ohm)
DLM2HGN601SZ3
600 ±25%
100
16
100 min.
100
0.40 max.
Operating Temperature Range : -40°C to 85°C
■ Equivalent Circuit
■ Impedance-Frequency Characteristics
10000
4
(1)
(3)
(5)
Differential Mode
1000
100
Common Mode
10
1
(2)
(4)
(6)
No polarity
1
10
100
1000
10000
Frequency (MHz)
100
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip Common Mode Choke Coils Winding Type DLW21S/DLW21H/DLW31S Series
DLW21S Series
■ Features
1. DLW21S series realizes small size and low profile.
2.0x1.2x1.2mm
2. High common mode impedance at high frequency
2.0±0.2
1.2±0.2
effects excellent noise suppression performance.
3. Various common mode impedance items of 67 to 370ohm
can be used, considering noise level and signal
frequency.
(1)
(2)
4. DLW21S series enables noise suppression for
differential signal line without distortion in
high speed signal transmission due to its high
coupling.
(4)
(3)
DLW21S
(in mm)
(0.45)
(0.45)
5. Lead is not contained in the product.
6. Small dimension enables higher density packaging.
■ Applications
1. USB lines of PC, Peripheral equipment.
2. LVDS lines of Note-PC, LCD.
3. USB lines of Small digital AV equipment such as
digital camera.
Common Mode Impedance
(at 100MHz, 20 degree C)
(ohm)
Rated Current Rated Voltage Insulation Resistance Withstand Voltage DC Resistance
Part Number
(mA)
(Vdc)
(M ohm)
(Vdc)
(ohm)
4
DLW21SN670SQ2
DLW21SN900SQ2
DLW21SN121SQ2
DLW21SN181SQ2
DLW21SN261SQ2
DLW21SN371SQ2
67 ±25%
90 ±25%
400
330
370
330
300
280
50
50
50
50
50
50
10 min.
10 min.
10 min.
10 min.
10 min.
10 min.
125
125
125
125
125
125
0.25 max.
0.35 max.
0.30 max.
0.35 max.
0.40 max.
0.45 max.
120 ±25%
180 ±25%
260 ±25%
370 ±25%
Operating Temperature Range : -40°C to 85°C
■ Equivalent Circuit
■ Impedance-Frequency Characteristics
DLW21S
DLW21S
10000
DLW21SN371SQ2
Common mode
DLW21SN261SQ2
DLW21SN181SQ2
DLW21SN121SQ2
1000
DLW21SN900SQ2
DLW21SN670SQ2
100
(2)
(3)
(1)
10
Differential mode
DLW21SN371SQ2
(4)
DLW21SN261SQ2
DLW21SN181SQ2
DLW21SN121SQ2
DLW21SN900SQ2
DLW21SN670SQ2
1
No polarity
0.1
1
10
100
1000
Frequency (MHz)
101
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
DLW21H Series
■ Features
1. Small size and low profile (2.0x1.2x0.9mm).
Excellent noise suppression for sets of small and
thin size.
2.0±0.2
1.2±0.2
2. High common mode impedance at high frequency
effects excellent noise suppression performance.
3. Various common mode impedance from 67 to 180 ohm
can be used, selected depending on noise level
and signal frequency.
(0.45)
(1)
(0.45)
(2)
Electrode
() : Reference Value
DLW21H
4. Suitable for differential signal line like USB2.0,
IEEE1394 and LVDS, because DLW21H does not provide
distortion to high speed signal transmission due
to its high coupling. (USB2.0: DLW21HN900SQ2)
5. Lead is not contained in the product.
6. Small dimension enables higher density mounting.
(4)
(3)
(in mm)
■ Applications
Common mode noise suppression of signal lines in high
speed and high density digital equipment such as
personal computers and peripherals and
telecommunication equipment.
Common Mode Impedance
(at 100MHz, 20 degree C)
(ohm)
Rated Current Rated Voltage Insulation Resistance Withstand Voltage DC Resistance
Part Number
(mA)
(Vdc)
(M ohm)
(Vdc)
(ohm)
DLW21HN670SQ2
DLW21HN900SQ2
DLW21HN121SQ2
DLW21HN181SQ2
67 (Typ.)
90 (Typ.)
120 (Typ.)
180 (Typ.)
330
330
280
250
50
50
50
50
10 min.
10 min.
10 min.
10 min.
125
125
125
125
0.35 max.
0.35 max.
0.45 max.
0.50 max.
4
Operating Temperature Range : -40°C to 85°C
DLW21H
DLW21H
10000
1000
100
10
DLW21HN181SQ2
DLW21HN121SQ2
DLW21HN900SQ2
DLW21HN670SQ2
Common mode
(2)
(3)
(1)
DLW21HN181SQ2
DLW21HN121SQ2
DLW21HN900SQ2
DLW21HN670SQ2
(4)
1
Differential mode
10
No polarity
0.1
1
100
1000
Frequency (MHz)
102
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
DLW31S Series
■ Features
1. DLW31S realizes small size and low profile.
3.2x1.6x1.9mm.
1.6±0.2
2. High common mode impedance at high frequency
effects excellent noise suppression performance.
3. Various common mode impedance items of 90 to
2200ohm can be used, considering noise level and
signal frequency.
3.2±0.2
(1)
(2)
4. DLW31S series enables noise suppression for
differential signal line without distortion in high
speed signal transmission due to its high coupling.
5. Lead is not contained in the product.
6. Small dimension enables higher density packaging.
(4)
(3)
DLW31S
(in mm)
(0.6)
(0.6)
■ Applications
1. USB lines of PC, Peripheral equipment.
2. LVDS lines of Note-PC, LCD.
Common Mode Impedance
(at 100MHz, 20 degree C)
(ohm)
Rated Current Rated Voltage Insulation Resistance Withstand Voltage DC Resistance
Part Number
(mA)
(Vdc)
(M ohm)
(Vdc)
(ohm)
DLW31SN900SQ2
DLW31SN161SQ2
DLW31SN261SQ2
DLW31SN601SQ2
DLW31SN102SQ2
DLW31SN222SQ2
90 (Typ.)
160 (Typ.)
260 (Typ.)
600 (Typ.)
1000 (Typ.)
2200 (Typ.)
370
340
310
260
230
200
50
50
50
50
50
50
10 min.
10 min.
10 min.
10 min.
10 min.
10 min.
125
125
125
125
125
125
0.3 max.
0.4 max.
0.5 max.
0.8 max.
1.0 max.
1.2 max.
Operating Temperature Range : -40°C to 85°C
4
■ Equivalent Circuit
■ Impedance-Frequency Characteristics
DLW31S
DLW31S
10000
DLW31SN222SQ2
DLW31SN102SQ2
DLW31SN601SQ2
Common mode
DLW31SN261SQ2
DLW31SN161SQ2
DLW31SN900SQ2
1000
(1)
(2)
100
10
DLW31SN222SQ2
DLW31SN102SQ2
DLW31SN601SQ2
DLW31SN261SQ2
DLW31SN161SQ2
DLW31SN900SQ2
1
(3)
(4)
Differential mode
No polarity
0.1
1
10
100
Frequency (MHz)
1000
103
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Chip Common Mode Choke Coils Winding Type for Large Current DLW5AH/DLW5BS Series
The DLW5AH/5BS series is high performance wound type
*
*
chip common mode choke coil.
0.5 min.
■ Features
(L) 5.0±0.3
(W) 3.6±0.3
(1) (2)
1. High impedance (max. of 4000ohm at 100MHz : DLW5AH)
enables great noise suppression.
2. Large rated current (max. of 5A) is suitable for
power line use.
Starting position of wiring should
covered with resin.
*
3. DLW5AH/BS series does not damage high speed signal
due to high coupling common mode choke coil
structure.
DLW5AH Series
(4)
(3)
1.3 0.9 1.3
±0.3 ±0.3 ±0.3
in mm
4. Automatic mounting can be applied.
■ Applications
1. DC power lines in AC adapter of Portable equipment.
2. DC power lines of DC-DC converter, battery charger.
3.6±0.3
0.5 min.
(W) 5.0±0.3
(L) 5.0±0.3
(1)
(2)
DLW5BS Series
(4)
(3)
1.3 0.9 1.3
in mm
±0.3 ±0.3 ±0.3
4
Common Mode Impedance
(at 100MHz, 20 degree C)
(ohm)
Rated Current Rated Voltage Insulation Resistance Withstand Voltage DC Resistance
Part Number
(mA)
(Vdc)
(M ohm)
(Vdc)
(ohm)
DLW5AHN402SQ2
DLW5BSN191SQ2
DLW5BSN351SQ2
DLW5BSN102SQ2
DLW5BSN152SQ2
DLW5BSN302SQ2
4000 (Typ.)
190 (Typ.)
350 (Typ.)
1000 (Typ.)
1500 (Typ.)
3000 (Typ.)
200
5000
2000
1500
1000
500
50
50
50
50
50
50
10 min.
10 min.
10 min.
10 min.
10 min.
10 min.
125
125
125
125
125
125
3.0 max.
0.02 max.
0.04 max.
0.06 max.
0.1 max.
0.3 max.
Operating Temperature Range : -25°C to 85°C
■ Equivalent Circuit
■ Impedance-Frequency (Typical)
100000
Common mode
(1)
(2)
10000
DLW5AHN402SQ2
DLW5BSN302SQ2
DLW5BSN152SQ2
DLW5BSN102SQ2
DLW5BSN351SQ2
DLW5BSN191SQ2
1000
100
DLW5AHN402SQ2
DLW5BSN302SQ2
DLW5BSN152SQ2
(3)
(4)
DLW5BSN102SQ2
DLW5BSN351SQ2
DLW5BSN191SQ2
Differential mode
10
No polarity
1
10
100
1000
Frequency (MHz)
104
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Ferrite Beads Inductors Part Numbering
Ferrite Beads Inductors
(Global Part Number)
B
BL 02 RN
2
R1 M
2
q
w
e
r
t
y u
i
qProduct ID
yLead Length, Space
Product ID
Code
A
Lead Length, Space
Bulk, Axial Type, 3.7mm
Bulk, Axial Type, 45.0mm
Taping Axial Type, 26.0mm
Series
BL
Ferrite Beads Inductors
D
BL01
wSeries
E
Code
01
Series
F
J
Taping, Axial Type, 52.0mm
Bulk, Radial Type, 5.0mm
Bulk, Radial Type, 10.0mm
Taping, Radial Type, 16.5mm
Taping, Radial Type, 18.5mm
Taping, Radial Type, 20.0mm
Beads ø3.6
02
Beads ø3.4
M
N
P
Q
03
Beads ø2.3 max.
BL02/BL03
eBeads Core Material
Code
Beads Core Material
uLead Diameter
RN
Standard Type
Code
Lead Diameter
ø0.60mm
rNumbers of Beads Core
1
2
Code
Numbers of Beads Core
ø0.65mm
1
2
1
2
tLead Type
Code
A1
Lead Type
Axial Straight Type
Axial Crimp Type
Radial Straight Type
A2
R1
R2
R3
Radial Straight and wave formed Leads Type
Radial Crimp Type
5
iPackaging
Code
Packaging
Ammo Pack
Series
A
B
J
BL01/BL02/BL03
All series
Bulk
Paper Reel (ø320mm)
BL01
105
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Ferrite Beads Inductors BL01/BL02/BL03 Series
■ Features
BL01/02/03 series are ferrite beads with lead wires to
produce a high frequency loss for suppression of
noise. Simple construction and easy-to-use.
Effective for low impedance circuits such as power
supplies and grounds. Effective also for preventing
overshoot and undershoot the digital signal in clocks
or the like, and suppressing the higher harmonic wave.
ø0.65
20 min.
5.0±0.3
20 min.
45 min.
Coating extending on leads : 1.5 max.
Suitable for prevention of abnormal oscillation at
high frequency amplifying circuit.
BL01RN1A1D2B
BL02RN1R2M2B
BL02RN2R1M2B
BL03RN2R1M1B
(in mm)
7.5 max.
ø3.4±0.2
ø0.65
10±1.0
ø0.65
5.0±0.8
BL01RN1A2A2B
5.0±0.3
Coating extending on leads : 1.5 max.
There is excess bond stick on the wire.
(in mm)
(in mm)
9.0max
3.4±0.2
8.0 max.
ø3.4±0.2
φ0.65
5
5.0±0.8
5.0±0.8
ø0.65
BL02RN1R3J2B
There is excess bond stick on the wire.
(in mm)
(in mm)
2.3max
8.3max
9.0 max.
ø3.4±0.2
5.0±0.8
φ0.60
5.0±0.8
ø0.65
BL02RN2R3J2B
(in mm)
(in mm)
106
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Operating
Rated Current
Part Number
BL01RN1A1D2B
Temperature Range
(A)
(°C)
7
6
6
7
7
6
6
6
7
6
7
6
6
6
7
6
6
6
6
6
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
BL01RN1A1E1A
BL01RN1A1F1J
BL01RN1A2A2B
BL02RN1R2M2B
BL02RN1R2N1A
BL02RN1R2P1A
BL02RN1R2Q1A
BL02RN1R3J2B
BL02RN1R3N1A
BL02RN2R1M2B
BL02RN2R1N1A
BL02RN2R1P1A
BL02RN2R1Q1A
BL02RN2R3J2B
BL02RN2R3N1A
BL03RN2R1M1B
BL03RN2R1N1A
BL03RN2R1P1A
BL03RN2R1Q1A
■ Equivalent Circuit
(Resistance element becomes dominant
at high frequencies.)
5
■ Impedance-Frequency Characteristics
BL01RN1
BL02RN1
160
160
140
140
120
100
120
100
80
80
Z
Z
60
60
R
R
40
40
X
X
20
0
20
0
0.5
1
2
5
10
20
50
100 200
500 1000
0.5
1
2
5
10
20
50
100 200
500 1000
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
107
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Continued from the preceding page.
■ Impedance-Frequency Characteristics
BL02RN2
BL03RN2
160
160
140
140
120
100
120
100
80
Z
R
80
60
40
Z
60
R
X
40
X
20
0
20
0
0.5
1
2
5
10
20
50
100
200
500 1000
0.5
1
2
5
10
20
50
100
200
500 1000
Frequency (MHz)
Frequency (MHz)
5
108
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Disc Type EMIFILr Part Numbering
Disc Type EMIFILr
(Global Part Number)
B
DS
S
9
H
B3 2E 271
Q55
q
w
e
r
t
y
u
i
o
qProduct ID
tTemperature Characteristics
Product ID
Code
Capacitance Change
DS
Three-terminals Capacitor
B3
C5
D3
E3
E5
F3
Z8
±10% (Temperature Range : -25˚C to +85˚C)
±22% (Temperature Range : -25˚C to +85˚C)
+20/-30% (Temperature Range : -25˚C to +85˚C)
+20/-55% (Temperature Range : -25˚C to +85˚C)
+22/-56% (Temperature Range : -25˚C to +85˚C)
+30/-80% (Temperature Range : -25˚C to +85˚C)
+30/-85% (Temperature Range : -10˚C to +60˚C)
wStructure
Code
Structure
N
S
T
No Ferrite Beads Type
Built-in Ferrite Beads Type
with Ferrite Beads Type
eStyle
yRated Voltage
Code
Style
Code
1C
Rated Voltage
16V
6
9
Diameter 8.0mm Type
Diameter 9.5mm Type
1H
50V
2A
100V
rCategory
2E
250V
Code
N
Category
uCapacitance
for General Use
for Heavy-duty
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
H
iLead Type/oPackaging
Lead Type
Code
Q55B
Q50B
Q52B
Q54B
Q56B
T41B
T51B
Q91J
Q92J
Q93J
Q91A
Q92A
Q93A
U21A
U31A
Lead Length* (in mm)
25.0 min.
4.0±0.5
Packaging
Series
All series
DST9N/H
DST9N
Straight
Incrimp
6.0±1.0
4.0±0.5
Bulk
DSN6/9, DSS6/9
5
6.0±1.0
4.0±0.5
DSS6N
25.0 min.
20.0±1.0
16.5±1.0
18.5±1.0
20.0±1.0
16.5±1.0
18.5±1.0
16.5±1.0
18.5±1.0
DSS9N/H, DST9N
DSS9N/H
Paper Reel (ø320mm)
Straight
DSp6, DSN9N/H
All series except DSS9N/H
Ammo Pack
Incrimp
DSS6N
Lead Distance between Reference and Bottom Planes except Bulk.
*
109
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Disc Type EMIFILr DSN6/DSS6 Series
2.54 max.
7.0 max.
■ Features
DS_6 is comnpact, high performance lead type EMI
suppression filter which can be mounted 2.54mm pitch.
Its 3-terminal structure enables nice high
frequency performance.
I
2.5±0.5
Q55 Type : 25.0 min.
Q56 Type : 6.0±1.0
Q54 Type : 4.0±0.5
5.0±0.5
ø0.6
DSN6_Q55B Series
GND
(in mm)
2.54 max.
2.54 max.
8.0 max.
8.0 max.
*1
*1
*2
*2
I
I
2.5±0.5
Q55 Type : 25.0 min.
Q56 Type : 6.0±1.0
Q54 Type : 4.0±0.5
T52 Type : 25.0 min.
2.5±0.5
T41 Type : 4.0±0.5
5.0±0.5
5.0±0.5
ø0.6
ø0.6
GND
GND
(in mm)
DSS6_T51B Series
Incrimp Type
DSS6_Q55B Series
Straight Type
(in mm)
*1 There may be a hole on the top of ferrite beads,
which cause no characteristics deterioration.
*2 Bottom of the ferrite beads may not be level with each other.
*1 There may be a hole on the top of ferrite beads,
which cause no characteristics deterioration.
*2 Bottom of the ferrite beads may not be level with each other.
DSN6 Series
Capacitance
(pF)
Rated Voltage
Rated Current
Operating Temperature Range
Part Number
(Vdc)
(A)
(°C)
DSN6NC51H220
DSN6NC51H330
DSN6NC51H470
DSN6NC51H101
DSN6NC51H271
DSN6NC51H102
DSN6NC51H222
DSN6NZ81H103
22 +20% ,-20%
33 +20% ,-20%
50
50
50
50
50
50
50
50
6
6
6
6
6
6
6
6
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
47 +20% ,-20%
5
100 +20% ,-20%
270 +20% ,-20%
1000 +20% ,-20%
2200 +20% ,-20%
10000 +80% ,-20%
Please refer to Part Numbering for Type and Length of Lead.
110
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
(50Ω - 50Ω)
0
20
40
60
80
1
2
8
7
6
5
4
3
1 : 22pF
2 : 33pF
3 : 47pF
4 : 100pF
5 : 270pF
6 :1000pF
7 : 2200pF
8 : 10000pF
GND
100
120
No polarity
0.1
1
10
Frequency (MHz)
100
1000
Built-in Ferrite Beads DSS6 Series Incrimp Type
Capacitance
(pF)
Rated Voltage
(Vdc)
Rated Current
(A)
Operating Temperature Range
Part Number
DSS6NC52A220
(°C)
22 +20% ,-20%
33 +20% ,-20%
100
100
100
100
100
100
100
100
100
100
100
16
6
6
6
6
6
6
6
6
6
6
6
6
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
DSS6NC52A330
DSS6NC52A470
DSS6NC52A101
DSS6NC52A151
DSS6NC52A221
DSS6NC52A271
DSS6NC52A471
DSS6NC52A102
DSS6NE52A222
DSS6NZ82A103
DSS6NF31C223
47 +20% ,-20%
100 +20% ,-20%
150 +20% ,-20%
220 +20% ,-20%
270 +20% ,-20%
470 +20% ,-20%
1000 +20% ,-20%
2200 +80% ,-20%
10000 +30% ,-30%
22000 +80% ,-20%
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
0
1
2
20
40
60
80
12
11
10
9
8
5
4
3
1 : 22pF
2 : 33pF
3 : 47pF
5
4 : 100pF
5 : 150pF
6 : 220pF
7 : 270pF
8 : 470pF
9 : 1000pF
10 : 2200pF
11 : 10000pF
12 : 22000pF
7
6
GND
100
120
No polarity
0.1
1
10
Frequency (MHz)
100
1000
111
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Built-in Ferrite Beads DSS6 Series Straight Type
Capacitance
(pF)
Rated Voltage
(Vdc)
Rated Current
(A)
Operating Temperature Range
Part Number
DSS6NC52A220
(°C)
22 +20% ,-20%
33 +20% ,-20%
100
100
100
100
100
100
100
100
100
100
100
16
6
6
6
6
6
6
6
6
6
6
6
6
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
DSS6NC52A330
DSS6NC52A470
DSS6NC52A101
DSS6NC52A151
DSS6NC52A221
DSS6NC52A271
DSS6NC52A471
DSS6NC52A102
DSS6NE52A222
DSS6NZ82A103
DSS6NF31C223
47 +20% ,-20%
100 +20% ,-20%
150 +20% ,-20%
220 +20% ,-20%
270 +20% ,-20%
470 +20% ,-20%
1000 +20% ,-20%
2200 +80% ,-20%
10000 +30% ,-30%
22000 +80% ,-20%
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
(50Ω - 50Ω)
0
20
2
1 : 22pF
2 : 33pF
3 : 47pF
1
12
11
10
9
8
5
4
3
4 : 100pF
5 : 150pF
6 : 220pF
7 : 270pF
8 : 470pF
9 : 1000pF
10 : 2200pF
11 : 10000pF
12 : 22000pF
40
7
6
60
80
GND
100
120
No polarity
0.1
1
10
Frequency (MHz)
100
1000
5
112
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Disc Type EMIFILr Broad Type DSN9/DSS9/DST9 Series
4.0 max.
9.5 max.
■ Features
DS_9 is a basic type EMI suppression filter which can
obtain high insertion loss in a wide frequency range.
Its 3-terminal structure enables nice high frequency
performance. DSS9NP32A222/DSS9NT31H223 are low
distortion type for audio circuits.
2.5±0.5
5.0±0.5
1.0±0.5
ø0.65
GND
I
DSN9N_Q55B
Q55 Type : 25.0 min.
Q56 Type : 6.0±1.0
Q54 Type : 4.0±0.5
(in mm)
12.0 max.
7.5 max.
4.0 max.
9.5 max.
Ferrite bead
*1
Ferrite bead
2.5±0.5
5.0±0.5
2.5±0.5
2.5±0.5
5.0±0.5
ø0.65
1.25±0.5
I
ø0.65
GND
Q55 Type : 25.0 min.
Q56 Type : 6.0±1.0
Q54 Type : 4.0±0.5
DST9N_Q55B
DSS9N_Q55B
GND
Q55 Type : I=25.0 min.
Q52 Type : I1=6.0±1.0
Q50 Type : I1=4.0±0.5
(in mm)
*1 Bottom of the ferrite beads may not be level with each other.
(in mm)
DSN9 Series
Capacitance
(pF)
Rated Voltage
Rated Current
Operating Temperature Range
Part Number
(Vdc)
(A)
(°C)
DSN9NC52A271
DSN9NC52A222
DSN9NC51H223
DSN9NC51C104
270 +20% ,-20%
2200 +20% ,-20%
22000 +50% ,-20%
100000 +20% ,-20%
100
100
50
7
7
7
7
-25 to 85
-25 to 85
-25 to 85
-25 to 85
5
16
Rated current is 6A for taping type.
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
(50Ω - 50Ω)
270pF
2200pF
0
20
40
22000pF
100000pF
60
GND
80
No polarity
100
0.01
0.1
1
10
100
1000
Frequency (MHz)
113
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Built-in Ferrite Beads DSS9 Series
Capacitance
Rated Voltage
(Vdc)
Rated Current
(A)
Operating Temperature Range
Part Number
(pF)
(°C)
DSS9NC52A220
DSS9NC52A470
DSS9NC52A101
DSS9NC52A271
DSS9NC52A222
DSS9NP32A222
DSS9NC51H223
DSS9NT31H223
22 +20% ,-20%
47 +20% ,-20%
100
100
100
100
100
100
50
7
7
7
7
7
7
7
7
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
100 +20% ,-20%
270 +20% ,-20%
2200 +20% ,-20%
2200 +20% ,-20%
22000 +50% ,-20%
22000 +50% ,-20%
50
Rated current is 6A for taping type.
DSS9NP32A222/DSS9NT31H223 are low distortion types for audio IF circuits.
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
270pF
100pF
(50Ω - 50Ω)
0
47pF
22pF
20
40
2200pF(DSS9NB32A222)
2200pF(DSS9NP32A222)
22000pF(DSS9ND31H223)
22000pF(DSS9NT31H223)
60
80
GND
No polarity
100
0.01
0.1
1
10
100
1000
Frequency (MHz)
With Ferrite Beads DST9 Series
Capacitance
Rated Voltage
(Vdc)
Rated Current
(A)
Operating Temperature Range
Part Number
(pF)
(°C)
DST9NC52A271
DST9NC52A222
DST9NC51H223
270 +20% ,-20%
2200 +20% ,-20%
22000 +50% ,-20%
100
100
50
7
7
7
-25 to 85
-25 to 85
-25 to 85
5
Rated current is 6A for taping type.
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
(50Ω - 50Ω)
0
2200pF
20
270pF
22000pF
40
60
80
GND
No polarity
100
0.01
0.1
1
10
Frequency (MHz)
100
1000
114
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Disc Type EMIFILr Heavy-duty Type DSN9H/DSS9H/DST9H Series
4.0 max.
9.5 max.
■ Features
DS_9H is a basic type EMI suppression filter which can
obtain high insertion loss in a wide frequency range.
Its three-terminal structure enables nice high
frequency performance. High rated voltage of 250Vdc
and wide operating temperature range from -40 degree C
to 105 degree C are suitable for high reliability
circuits.
2.5±0.5
5.0±0.5
1.0±0.5
ø0.65
GND
I
DSN9H_Q55B
Q55 Type : 25.0 min.
Q56 Type : 6.0±1.0
Q54 Type : 4.0±0.5
(in mm)
12.0 max.
7.5 max.
4.0 max.
9.5 max.
Ferrite bead
*1
Ferrite bead
2.5±0.5
5.0±0.5
2.5±0.5
2.5±0.5
5.0±0.5
ø0.65
1.25±0.5
I
ø0.65
GND
Q55 Type : 25.0 min.
Q56 Type : 6.0±1.0
Q54 Type : 4.0±0.5
DST9H_Q55B
DSS9H_Q55B
GND
Q55 Type : I=25.0 min.
Q52 Type : I1=6.0±1.0
Q50 Type : I1=4.0±0.5
(in mm)
*1 Bottom of the ferrite beads may not be level with each other.
(in mm)
DSN9H Series
Capacitance
(pF)
Rated Voltage
Rated Current
Operating Temperature Range
Part Number
(Vdc)
(A)
(°C)
DSN9HB32E220
DSN9HB32E101
DSN9HB32E271
DSN9HB32E222
22 +20% ,-20%
100 +20% ,-20%
270 +20% ,-20%
2200 +20% ,-20%
250
250
250
250
6
6
6
6
-40 to 105
-40 to 105
-40 to 105
-40 to 105
5
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
100pF
270pF
22pF
(50Ω - 50Ω)
0
2200pF
20
40
60
80
GND
100
120
No polarity
0.1
1
10
Frequency (MHz)
100
1000
115
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Built-in Ferrite Beads DSS9H Series
Capacitance
Rated Voltage
(Vdc)
Rated Current
(A)
Operating Temperature Range
Part Number
(pF)
(°C)
DSS9HB32E220
DSS9HB32E101
DSS9HB32E271
DSS9HB32E222
22 +20% ,-20%
100 +20% ,-20%
270 +20% ,-20%
2200 +20% ,-20%
250
250
250
250
6
6
6
6
-40 to 105
-40 to 105
-40 to 105
-40 to 105
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
(50Ω - 50Ω)
22pF
100pF
0
270pF
20
2200pF
40
60
80
GND
No polarity
100
120
0.1
1
10
100
1000
Frequency (MHz)
With Ferrite Beads DST9H Series
Capacitance
Rated Voltage
(Vdc)
Rated Current
(A)
Operating Temperature Range
Part Number
(pF)
(°C)
DST9HB32E220
DST9HB32E101
DST9HB32E271
DST9HB32E222
22 +20% ,-20%
100 +20% ,-20%
270 +20% ,-20%
2200 +20% ,-20%
250
250
250
250
6
6
6
6
-40 to 105
-40 to 105
-40 to 105
-40 to 105
Please refer to Part Numbering for Type and Length of Lead.
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
5
(50Ω - 50Ω)
0
100pF
22pF
20
40
270pF
2200pF
60
80
GND
No polarity
100
120
0.1
1
10
Frequency (MHz)
100
1000
116
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Lead Type EMIGUARDr (EMIFILr with Varistor Function) Part Numbering
Lead Type EMIGUARDr (EMIFILr with Varistor Function)
(Global Part Number)
221 T51
B
VF
S
6
V
D8 1E
q
w
e
r
t
y
u
i
o
qProduct ID
rFeatures
Product ID
Code
Features
VF
EMIGUARDr Lead Type
V
with Varistor Function
wStructure
tTemperature Characteristics
Code
S
Structure
Code
Capacitance Change
Built-in Ferrite Beads Type
with Resistance
D8
D3
+20/-30% (Temperature Range : -40˚Cb+105˚C)
+20/-30% (Temperature Range : -25˚Cb+85˚C)
R
eStyle
yRated Voltage
Code
Style
Code
1E
Rated Voltage
25V
3
6
9
Size is expressed by a figure
1B
12V
uCapacitance
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
iLead Type/oPackaging
Code
T51B
U31A
Q55B
Q91J
Q92J
Q93J
Lead Type
Lead Length*
Packaging
Bulk
Series
25.0mm min.
Incrimp
VFR3/VFS6
18.5+/-1.0mm
25.0mm min.
20.0+/-1.0mm
16.5+/-1.0mm
18.5+/-1.0mm
Ammo Pack
Bulk
Straight
VFS9
Paper Reel (ø320mm)
*Lead Distance between Reference and Bottom Planes except Bulk.
5
117
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Lead Type EMIGUARDr (EMIFILr with Varistor Function) VFR3V/VFS6V/VFS9V Series
for Semiconductor Protection VFR3V Series
2.3 max.
8.0 max.
■ Features
The VFR3V series is designed for ESD surge protection
of IC. It efficiently absorbs ESD surges rushed into
IC's I/O terminals.
No.1 Pin Indicator
(Surge entrance side)
2.5±0.5
5.0±0.5
■ Applications
ø0.45±0.1
Elimination of noise and protection of semiconductors
in office equipment, including computers and
peripheral equipment, copy machines, and communication
terminals.
(1) (2) (3)
(in mm)
Rated
Voltage
(Vdc)
Rated
Current
(mA)
Peak
Pulse Current
(A)
Operating
Varistor Voltage
Capacitance
(pF)
Part Number
Temperature Range
(Vdc)
(°C)
VFR3VD31E131
25
50 +20% ,-20%
130 +20% ,-20%
20
15
-25 to 85
Please refer to Part Numbering for Type and Length of Lead.
■ Insertion Loss Characteristics
(50Ω - 50Ω)
0
10
20
30
40
50
60
70
5
5
10
100
1000
Frequency (MHz)
118
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
for Signal-Line VFS6V Series
2.54 max.
8.0 max.
■ Features
*1
The VFS6V series is designed for surge protection of
signal line. It protects electric circuit from surges
such as static electricity and suppresses EMI noise.
Built-in ferrite bead gives excellent EMI suppression.
*2
2.5±0.5
■ Applications
5.0±0.5
ø0.6
Elimination of noise and protection of electric
circuits in office equipment, including computers and
peripheral equipment, copy machines, and communication
terminals.
GND
(in mm)
*1 There may be a hole on the top of ferrite beads,
which cause no characteristics deterioration.
*2 Bottom of the ferrite beads may not be level with each other.
Rated
Rated
Current
(A)
Peak
Pulse Current
(A)
Operating
Temperature Range
(°C)
Varistor Voltage
Capacitance
(pF)
Part Number
VFS6VD81E221
Voltage
(Vdc)
(Vdc)
25
50 +20% ,-20%
220 +20% ,-20%
6
100
-40 to 105
Please refer to Part Numbering for Type and Length of Lead.
■ Insertion Loss Characteristics
(50Ω - 50Ω)
0
20
40
60
10.0
100.0
1000.0
Frequency (MHz)
5
119
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
for Large-Current VFS9V Series
12.0 max.
7.5 max.
■ Features
The VFS9V series is designed for surge protection of
the power supply line. It protects electric circuits
from surges such as static electricity and suppresses
EMI noise. Its large capacitance value enables high
insertion loss for EMI noise.
Ferrite bead
*1
2.5±0.5
5.0±0.5
2.5±0.5
ø0.65
■ Applications
GND
For circuit protection and noise suppression in
electronics equipment such as computers and DC motors,
and in electronics systems installed in cars such as
car audio equipment and engine controllers.
(in mm)
*1 Bottom of the ferrite beads may not be level with each other.
Rated
Rated
Current
(A)
Operating
Temperature Range
(°C)
Varistor Voltage
(Vdc)
Capacitance
(pF)
Part Number
VFS9VD31B223
Voltage
(Vdc)
12
22 +20% ,-20%
22000 +50% ,-20%
7
-40 to 100
Rated current: 6A (Taping Type)/7A (Bulk Type)
Please refer to Part Numbering for Type and Length of Lead.
■ Insertion Loss Characteristics
■ Voltage-Current Characteristics
(50Ω - 50Ω)
300
0
20
40
60
200
100
−30
−20
−40
−10
0
10
20
30
40
80
100
−100
0.1
0.5
1
5
10
50 100
500 1000
Frequency (MHz)
−200
5
−300
Voltage (V)
120
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Noise Suppression Effect of VFR/VFS Series
!Example of IC Protection
" Testing Method
[Test Circuit]
VFR3V
1. Put ESD surge to IC (7404 family) input terminal with
ESD simulator based on IEC 801-2.
2. Check IC's operation.
330Ω
150pF
3. If IC's operation is normal, increase ESD voltage in 1kV
step.
Test IC
4. Continue above steps 1 to 3 till IC's operation becomes
abnormal.
ESD Simulator
" Result
(Result)
Breakdown level
Without VFR3V
With use VFR3V
[kV]
30min.
25
20
15
10
5
0
LS
ALS
AS
C
HC
AC
IC’s Family
!Example of EMI Suppression Effect
[Test Circuit]
ANT
Signal
1MHz
F
Noise Radiation Cable (50cm)
ACO4
Shield
5
Type of Filter
Description
EMI Suppression Effect
70
60
50
40
30
20
Before Countermeasures
(No Filters)
30
90
150
210
270
330
Frequency [MHz]
70
60
50
40
30
20
Use VFR3VD31E131T51
30
90
150
210
270
330
Frequency [MHz]
121
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
NoiseSuppressionEffect of VFR/VFS Series
!Features (VFS9V)
Items
Test methods
Rated values
1.4 times the varistor voltage (V1) is applied for 5 minutes at room
temperature.
Overload
At room temperature. Surges are applied are
Surge Test (1)
Surge Test (2)
105 times every 2 seconds. Then after 1 or 2
400V
hours, the sample is measured.
Items
Specifications
WithinT15%
500kΩ min
0.47µF
Rated Capacitance Change
Insulation Resistance
0.8Ω
At room temperature. Capacitor
"C" is changed with 70V, then dischanged to
apply the voltage to the sample. Tested once
(resuming JASO A-1).
Rated of Change
in Varistor Voltage V1*
70V
2W
WithinT15%
C
Voltage Rate
1.30 max
C=110mF
High
Temperature
Load
At a temperature of 85±3D. The varistor voltage V1 is continuously
applied to the sample for 1000 to 1024 hours.
Then it is left at room temperature, for 4 to 24 hours before measuring.
*V1 : Voltage when 1mA is applied
!Pulse-Voltage Breakdown Characteristic (VFS9V)
The VFS9V EMIGUARDr use a self healing varistor-
capacitor, so that it can be used under a 500 to 600V surge
which would break conventional disk type EMI filters. As
shown in figure below the EMIGUARDr withstands 2000V
impulses applied 1000 times.
50Ω
50Ω
VFS9V
100
Capacitance:0.022µF
with varistor function
V
3-terminal capacitor
Capacitance:0.022µF
with no varistor
function
50
800ns
Residual ratio
when 1000 pulses
are applied
0
5
0
500
1000
1500
2000
Pulse Voltage Applied [V]
!Temperature Characteristics of
Varistor Voltage-Insulation Resistance (VFS9V)
104
103
102
10
Insulation
resistance
Change rate of
varistor voltage
+10
0
−10
1
−30
0
30
Temperature [D]
60
90
Continued on the following page.
122
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Noise Suppression Effect of VFR/VFS Series
Continued from the preceding page.
!Noise Absorption Effect of EMIGUARDr
Type of Filter
EMI Suppression Effect
Description
: 200V/div
: 10ns/div
Waveform when EMIGUARDr is not
used.
100
90
80
(Surge from a noise simulator)
without EMIGUARDr
20
10
0%
: 200V/div
: 10ns/div
Waveform after the noise passed
through EMIGUARDr. Little noise is
recorded.
with EMIGUARDr
100
90
80
D
223S
12-22
20
10
0%
!Comparative Data
1. Absorption of quick-rising, high-frequency noise (10ns/div, 100V/div)
Type of Filter
EMI Suppression Effect
Description
50ns
without Filters
Noise wave applied
As with the 2-terminal capacitor
100
90
80
Conventional varistor
20
10
0%
5
The 2-terminal capacitor is influenced
by lead line inductance, leaving behind
some of the rising and falling edges.
The residual noise can cause the
system to malfunction.
2-terminal capacitor
(with varistor function)
100
90
80
20
10
0%
The 3-terminal structure eliminates
most of the lead line inductance. This
allows the VFS9V to completely absorb
the rising and falling edges of the
applied pulses.
100
90
VFS9V
80
20
10
0%
Continued on the following page.
123
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Noise Suppression Effect of VFR/VFS Series
Continued from the preceding page.
2. Absorption of wide-pulse noise (50ns/div, 200V/div)
Type of Filter
EMI Suppression Effect
Description
200ns
without Filters
Noise wave applied
In capacitors the voltage of the residual
surge (1300V) is higher than that of the
above example. The wave height is
almost the same as the original.
100
90
80
2-terminal capacitor
20
10
0%
Conventional EMI filters do not work for
wide-pulse noise because capacitors
are saturated. In this example, the
residual 1200V surge can cause the
system to breakdown.
3-terminal capacitor
(with ferrite bead)
100
90
80
20
10
0%
Bypassing the high voltage to the
ground, voltage can be surppressed.
VFS9V
100
90
80
20
10
0%
5
124
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Block Type EMIFILr BNX Series
BNX Series
12.0±0.5
11.0±0.5
The block type "EMIFIL" BNX series incorporates
through-type capacitor, monolithic chip capacitors and
bead. The BNX is high performance for use in DC power
0.8
ø0.8
ø0.8
ø0.8
±0.1
circuits.
0.6
±0.1
2.5±0.2
2.5±0.2
7.5±0.2
2.5±0.2
■ Features
1. The filter enables obtaining high insertion loss in
PSG : Power supply ground
CG : Load circuit ground
CB : Load circuit + Bias
wide frequency ranges from 0.5MHz to 1GHz.
CB
CG
CG
2. The only one filter block enables noise suppression
of both the positive and negative lines.
3. There are no connection routes in the current
circuits, thus ensuring highly reliable
performance.
BNX002/BNX003
(in mm)
PSG
B
12.0±0.5
11.0±0.5
■ Applications
Noise elimination from DC power sources in a variety
of switching power sources, engine control units,
digital equipment and computer terminals.
0.8
ø1.0
ø1.0
ø1.0
±0.1
0.6
±0.1
2.5±0.2
2.5±0.2
7.5±0.2
2.5±0.2
BNX005-01
PSG : Power supply ground
CG : Load circuit ground
CB : Load circuit + Bias
CB
CG
CG
BNX005
(in mm)
PSG
B
Rated
Voltage
(Vdc)
Withstand
Voltage
(Vdc)
Rated
Current
(A)
Insulation
Resistance (min.)
(M ohm)
Part Number
Insertion Loss
BNX002-01
BNX003-01
BNX005-01
50
150
50
125
375
125
10
10
15
100
100
100
1MHz to 1GHz:40dB min.(20 to 25°C line impedance=50 ohm)
5MHz to 1GHz:40dB min.(20 to 25°C line impedance=50 ohm)
1MHz to 1GHz:40dB min.(20 to 25°C line impedance=50 ohm)
5
Operating Temperature Range : -30°C to 85°C
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
(50Ω - 50Ω)
0
BNX003-01
20
L1
L2
L3
C2
CB (2)
(1)
B
BNX002-01
40
(BNX005-01)
C1
(3) PSG
CG (4)
60
(1)-(4) : Terminal Number
PSG : Power Supply Ground
CG : Circuit Ground
80
CB
: Circuit+B
100
0.001
0.01
0.1
1
10
100
1000
Frequency (MHz)
125
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Noise Suppression Effect of BNX Series
!Suppression of DC Side
Ripple of the Switching Power Supply
[Testing Circuit]
BNX002-01
+5V
CG
Switching
Power Supply
Type of Filter
EMI Suppression Effect
Description
High frequency noise, max. 0.5V, can
be seen.
+5.0V
50µs/div
→
When BNX002 is not used
0.2V/div
Noise can be almost suppressed by
BNX002.
+5.0V
50µs/div
→
When BNX002 is used
0.2V/div
5
126
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Common Mode Choke Coils Part Numbering
Common Mode Choke Coils
(Global Part Number)
P
1
B
PL
T
09
H
N
200 3R0
q
w
e
r
t
y
u
i
o
!
qProduct ID
yInductance
Expressed by three figures. The unit is micro-henry (µH). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures. If
there is a decimal point, it is expressed by the capital letter "R". In
this case, all figures are significant digits. If inductance is less
than 0.1 µH, the inductance code is expressed by a combination
of two figures and the capital letter "N", and the unit of
inductance is nano-henry (nH). The capital letter "N" indicates the
unit of "nH", and also expresses a decimal point. In this case, all
figures are significant digits.
Product ID
PL
Common Mode Choke Coils
wType
Code
Type
T
DC Type
eApplications
Code
Applications
uRated Current
09
for DC Line High-frequency Type
Expressed by three figures. The unit is in amperes (A). A decimal
point is expressed by the capital letter "R". In this case, all figures
are significant digits.
rStructure
Code
Structure
iWinding Mode
H
Core Horizontal Type
Code
Winding Mode
tFeatures
P
Aligned Winding Type
Code
Features
oLead Dimensions
N
General Use
Code
Lead Dimensions
1
5mm
!Packaging
Code
Packaging
Series
B
Bulk
All series
5
127
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Common Mode Choke Coils (for DC Line) PLT09H Series
The PLT09H series is common mode choke coil for DC
line. It is effective against the common mode noise
14 max.
that can cause radiative noise in power supply lines
and interface lines. The additional normal mode
inductance enables high suppression effect to
radiation noise.
ø0.6 max.
Soldered
10±0.5
5±0.5
(1) (2)
■ Features
1. This is a wide frequency range type, applicable in
applications ranging from a few MHz to several
(in mm)
(4) (3)
100MHz.
2. It features a low-profile design.
■ Applications
1. Noise suppression of SW power supply, DC-DC
converter.
2. DC power lines in AC adapter of Portable equipment.
Common Mode Inductance
Rated Current
(A)
Rated Voltage
(Vdc)
Withstand Voltage
(Vdc)
Part Number
(µH)
PLT09HN2003R0P1
20 min.
3
50
125
Operating Temperature Range : -40°C to 85°C
■ Equivalent Circuit
■ Insertion Loss Characteristics (Typical)
0
5
(1)
(2)
10
15
20
5
(3)
(4)
25
30
No polarity
0.1
1
10
100
1000
Frequency (MHz)
128
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Microwave Absorbers Part Numbering
Microwave Absorber
(Global Part Number) EA 1026
A
160
M
200 200
q
w
e
r
t
y
u
qProduct ID
tUnit of Dimension
One capital lettler expresses Unit of dimension ( ) and
Dimensions Length ( ).
u
y
Product ID
EA
Microwave Absorber
Code
M
Unit of Dimension
in mm (Standard)
in cm (Standard)
wSheet Type
Code
10pp
2070
Sheet Type
C
Iron carbonyl type
Standard shape is a rectangle.
Please contact us for other shapes.
Metal Flake Powder (non Halogen type)
Metal Flake Powder (UL certified type)
2100
yDimension (Length)
Expressed by 3 digits including the first decimal place.
eAdhesive Tape Type
Code
Adhesive Tape Type
Standard tape type
Thin Adhesive tape type
No tape type
uDimension (Width)
A
B
L
Expressed by 3 digits including the first decimal place.
Ex.)
U
UL certified type
Code
Dimension (Length g Width)
30.0g15.0 mm
M300150
C150100
rSheet Thickness
15.0g10.0 cm
Expressed by 3 digits including the second decimal place in mm.
Ex.)
Code
Sheet Thickness
020
0.20mm
6
129
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
On-Board Type (DC) EMI Suppression Filters (EMIFILr)
Microwave Absorbers EA10/EA20/EA21 Series
EA10 Series
■ Features
1. Excellent elasticity and durability with silicon
rubber.
2. Suitable for prevention of abnormal oscillation in
high frequency modules, suppression of spurious
spectra and prevention interference between
circuits.
3. Holds easily in equipment with adhesive tape.
Thickness
(mm)
Part Number
EA1026A100
Applicable Frequency
Flame Resistance
Halogen
Operating Temperature Range
20.0 GHz (Typ.)
11.5 GHz (Typ.)
10.0 GHz (Typ.)
5.8 GHz (Typ.)
2.5 GHz (Typ.)
1.0 (Typ.)
1.6 (Typ.)
1.8 (Typ.)
1.8 (Typ.)
2.7 (Typ.)
-
Halogen Free
Halogen Free
Halogen Free
Halogen Free
Halogen Free
-40 to +80 °C
-40 to +80 °C
-40 to +80 °C
-40 to +80 °C
-40 to +80°C
EA1026A160
EA1026A180
EA1046A180
EA1075A270
-
-
UL94V-0
UL94V-0
■ Refrection Loss
0
5
10
15
20
EA1026A100
25
EA1026A180
EA1026A160
EA1075A270
30
35
40
EA1046A180
0
2
4
6
8
10
12
14
16
18
20
Frequency(GHz)
6
130
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
EA20/21 Series
■ Features
1. Magnetically-shielded high-micro and high-loss
characteristics can suppress noise in a wide
frequency band for digital equipment.
2. Thin (0.2mm-1.0mm) and flexible sheet makes easy
handling in assembly process.
3. Holds easily in equipment with adhesive tape.
4. EA20xx series : Non Halogen type
EA21xx series : UL94V-0 certified material is used.
Thickness
(mm)
Part Number
EA2070A020
Applicable Frequency
Flame Resistance
Halogen
Operating Temperature Range
0.1 - 3.0GHz (Typ.)
0.1 - 3.0 GHz (Typ.)
0.1 - 3.0 GHz (Typ.)
0.1 - 3.0 GHz (Typ.)
0.1 - 3.0 GHz (Typ.)
0.1 - 3.0 GHz (Typ.)
0.1 - 3.0 GHz (Typ.)
0.1 - 3.0 GHz (Typ.)
0.1 - 3.0 GHz (Typ.)
0.1 - 3.0 GHz (Typ.)
0.1 - 3.0 GHz (Typ.)
0.1 - 3.0 GHz (Typ.)
0.1 - 3.0 GHz (Typ.)
0.1 - 3.0 GHz (Typ.)
0.2 (Typ.)
0.5 (Typ.)
1.0 (Typ.)
0.05 (Typ.)
0.10 (Typ.)
0.13 (Typ.)
0.2 (Typ.)
0.5 (Typ.)
0.2 (Typ.)
0.5 (Typ.)
1.0 (Typ.)
0.2 (Typ.)
0.5 (Typ.)
1.0 (Typ.)
-
Halogen Free
-40 to +105 °C
-40 to +105 °C
-40 to +105 °C
-40 to +105 °C
-40 to +105 °C
-40 to +105 °C
-40 to +105 °C
-40 to +105 °C
-40 to +105 °C
-40 to +105 °C
-40 to +105 °C
-40 to +105 °C
-40 to +105 °C
-40 to +105 °C
EA2070A050
EA2070A100
EA2070B005
EA2070B010
EA2070B013
EA2070B020
EA2070B050
EA2100A020
EA2100A050
EA2100A100
EA2100B020
EA2100B050
EA2100B100
-
Halogen Free
-
Halogen Free
-
Halogen Free
-
Halogen Free
-
Halogen Free
-
Halogen Free
-
Halogen Free
UL94V-0
UL94V-0
UL94V-0
UL94V-0
UL94V-0
UL94V-0
-
-
-
-
-
-
■ Magnetic Permeability-Reluctance (Typical)
20
16
12
µ"
8
4
0
0.1
1.0
10
Frequency (GHz)
6
131
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Chip EMIFILr !Caution/Notice
■ !Caution (Soldering and Mounting)
Give special attention when mounting chip "EMIFIL"
BLM_P/NFM_P series close to other products that
radiate heat. The excessive heat by other products
may cause deterioration of the insulation resistance
and result in excessive heat or fire.
■ Notice (Storage and Operating Conditions)
< Operating Environment >
checked if this period is exceeded.
2. Storage conditions
Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
(1) Storage temperature : -10 to 40 degree C
Relative humidity : 30 to 70%
< Storage and Handling requirements >
1. Storage Period
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.
BLM/BLA/VFM41R/DLP31S/DLM2HG series should be
used within 6 months, the other series should be
used within 12 months. Solderability should be
■ Notice (Rating)
Noise suppression levels resulting from MURATA's EMI
suppression filters "EMIFIL" may vary, depending on
the circuits and ICs used, type of noise, mounting
pattern, lead wire length, mounting location, and
other operating conditions. Be sure to check and
confirm in advance the noise suppression effect of
each filter, in actual circuits, etc. before applying
the filter in a commercial-purpose equipment design.
■ Notice (Soldering and Mounting)
< Operating Environment >
exceeded. (NFM41P/55P, VCM series should be used
within 6 months.)
Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
2. Storage conditions
< Storage and Handling requirements >
1. Storage Period
(1) Storage temperature : -10 to 40 C.
Relative humidity : 30 to 70%
Products inspected by Murata over 12 months
ago should be examined prior to use. Date can be
confirmed with inspection No. marked on the
container.
Avoid sudden changes in temperature and
humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.
Solderability should be checked if this period is
6
132
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Lead Type EMIFILr !Caution/Notice
■ !Caution (Rating)
Do not use products beyond the rated current and the
rated voltage, or deterioration of the insulation
resistance may result in excessive heat or fire.
■ !Caution (Soldering and Mounting)
Mounting holes should be designed as specified in
these specifications. Other design than shown in these
specifications may cause cracks in ceramics which may
lead to smoking or firing.
■ Notice (Storage and Operation Condition)
< Operating Environment >
solderability should be checked if this period is
exceeded.
1. Do not use products in a chemical atmosphere such
as chlorine gas, acid or sulfide gas.
2. Storage conditions
2. Do not use products near water, oil or organic
solvents. Avoid environment where dust or dirt may
adhere to product.
(1) Storage temperature : -10 to 40 degree C
Relative humidity : 30 to 70%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.
(3) When restoring taping type (BL01RN1R1F1J),
please attach the Spacer between flanges of reel.
The Spacer is corrugated paper which is attached
when shipping.
< Concerned to "EMIGUARD" >
VFR3V series is designed only to absorb electro-static
surges. Do not use this product to absorb large energy
surges such as lightning or switching related surges.
< Storage and Handling Requirements >
1. Storage Period
Use the products within 12 months after delivery;
■ Notice (Rating)
Noise suppression levels resulting from MURATA's EMI
suppression filters "EMIFIL" may vary, depending on
the circuits and ICs used, type of noise, mounting
pattern, lead wire length, mounting location, and
other operating conditions. Be sure to check and
confirm in advance the noise suppression effect of
each filter, in actual circuits, etc. before applying
the filter in a commercial-purpose equipment design.
6
133
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
EMIFILr (Soldering and Mounting)
1. Standard Land Pattern Dimensions
The capacitor type Chip EMIFILr (NFp series) / Chip EMIGUARDr (VFM series) suppress noise by conducting the high-
frequency noise element to ground. Therefore, to obtain maximum performance from these filters, the ground pattern should
be made as large as possible during the PCB design stage. As shown in the right, one side of the PCB is used for chip
mounting, and the other is used for grounding.
Small diameter feedthrough holes are then used to connect the grounds on each side of the PCB. This reduces the high-
frequency impedance of the grounding and maximizes the filter's performance. Please contact us if using a thinner land pad
than 18µm for NFM55P.
Land Pattern
+ Solder Resist
Land Pattern
(in mm)
Solder Resist
BLM03
BLM15
BLM18
BLM21
BLM31
BLM41
oReflow and Flow
BLMppP
BLM Series (Except BLMppP series)
a
b
a
b
Type
BLM03
Soldering
a
b
c
Land pad thickness
and dimension d
Rated
Current
(A)
Reflow 0.2-0.3 0.6-0.9 0.3
Type
Soldering
a
b
c
BLM15
Reflow
Flow
0.4
0.7
1.2-1.4 0.5
18µm 35µm 70µm
2.2-2.6
0.7
BLM18
(except 18PG type)
0.5-1.5
0.7 0.7 0.7
Flow
2.2-2.6
Reflow
1.8-2.0
BLM18PG
2
3
0.7
0.7 1.2 0.7 0.7
2.4 1.2 0.7
1.0 1.0 1.0
1.2 1.0 1.0
Reflow
1.8-2.0
BLM21
(except 21PG type)
1.2
2.0
3.0
3.0-4.0 1.0
1.5
2
BLM31
(except 31PG type) Reflow
Flow/
4.2-5.2
1.2
BLM21PG
1.2 3.0-4.0 1.0
3
2.4 1.2 1.0
6.4 3.3 1.65
1.2 1.2 1.2
2.4 1.2 1.2
6.4 3.3 1.65
1.2 1.2 1.2
2.4 1.2 1.2
6.4 3.3 1.65
Flow/
BLM41
(except 41Pp type)
6
5.5-6.5
Reflow
1.5/2
3
BLM03/15 is specially adapted for reflow soldering.
BLM31PG
2.0 4.2-5.2
1.2
6
Flow Mounting in High Density for BLM31/41
1-2
3
BLM41Pp
3.0 5.5-6.5
6
a
b
d
e
Type
BLM31
BLM41
a
b
c
d
e
2.0 4.2-5.2 1.2 1.3 1.35
3.0 5.5-6.5 1.2 1.8 1.5
oDo not apply narrower pattern that listed above to BLMppP.
Narrow pattern can cause excessive heat or open circuit.
6
oReflow soldering
oReflow and Flow
BLA2A
BLA31
BLA2A
BLA31
1.75
2.8
0.5 Pitch
0.25
0.8 Pitch
0.4
• If there are high amounts of self-heating on pattern, the
contact points of PCB and part may become damaged.
Continued on the following page.
134
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
EMIFILr (Soldering and Mounting)
Continued from the preceding page.
Land Pattern
+ Solder Resist
Land Pattern
Solder Resist
(in mm)
Reflow Soldering
NFM18
NFM18C/NFM18P/NFL18ST
NFL18SP
Small diameter thru hole ø0.3
0.4 1.2
0.8
0.8
0.4
0.6
1.0
2.2
0.4
1.0
2.0
The chip EMI filter suppress noise by passing the high-
frequency noise to ground. Therefore, to get noise
suppression effectively, it is recommended to put through
holes (ø0.3 mm) into the center and both sides of ground-
pattern to connect to ground-plane.
• NFp18, NFp21 are specially adapted for reflow soldering.
o Reflow Soldering
o Flow Soldering
NFM21
NFM3D
NFM41
NFR21G
NFL21S
VFM41R
Chip mounting side
Back side
Chip mounting side
Back side
Ground pattern
Small diameter thru hole ø0.4-ø0.6
Ground pattern
Small diameter thru hole ø0.4-ø0.6
a
b
c
Connect to ground pattern
of mounting side
a
b
c
Connect to ground pattern
of mounting side
d
Size (mm)
Part Number
a
b
c
d
Size (mm)
NFM21C/NFM21P
NFR21G/NFL21S
NFM3DC
Part Number
0.8
1.4
2.6
0.6
a
b
c
d
e
f
g
NFM3DC
1.0 1.4 2.5 4.4 1.0 2.0 2.4
1.4
2.5
4.4
1.0
NFM3DP
NFM41C
NFM41P
VFM41R
NFM3DP
NFM41C
1.5 2.0 3.5 6.0 1.2 2.6 3.0
1.5 2.0 3.5 6.0 1.2 2.6 3.0
2.0
2.0
3.5
3.5
6.0
6.0
1.2
1.2
NFM41P
VFM41R
NFA31G
NFA31C
NFW31S
NFE31P
o Reflow Soldering NFA31G/31C
o Reflow and Flow NFW31S
o Reflow Soldering NFE31P
Chip mounting side
Back side
2.6
Small diameter thru hole
ø0.4-ø0.6
Connect to ground pattern
of mounting side
6
R0.1 to R0.2 is preferred to obtain
high voltage withstanding
0.3
0.8 Pitch
3.8
Ground pattern
0.6
1.2
2.2
4.2
Continued on the following page.
135
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
EMIFILr (Soldering and Mounting)
Continued from the preceding page.
Land Pattern
+ Solder Resist
Land Pattern
Solder Resist
(in mm)
NFE61P
NFE61H
o Reflow Soldering
o Flow Soldering (Except NFE61H3321)
Back side
Chip mounting side
Back side
Chip mounting side
Small diameter thru hole
ø0.4-ø0.6
Connect to ground pattern
of mounting side
Small diameter thru hole
ø0.4-ø0.6
Connect to ground pattern
of mounting side
Ground pattern
1.5
3.8
4.8
9.0
Ground pattern
2.0
4.8
8.8
DLM2HG
DLP31S
DLP31D
DLP11S
DLW21S
DLW21H
DLW31S
DLW5AH
DLW5BS
oReflow and Flow
DLM2HG
DLP31D
DLP31S
2.8
1.0
4.0
1.0 0.6 1.0
0.8 pitch
0.4
oReflow Soldering
DLP11S
DLW21/DLW31S
3
a
0.55
1.95
b
Series
a
b
c
d
DLW5AH/5BS
DLW21S/H
DLW31S
0.8
1.6
2.6
3.7
0.4
0.4
1.2
1.6
1 : If the pattern is made with wider than 1.2mm (DLW21) /
1.6mm (DLW31S) it may result in components turning
around, because melting speed is different. In the worst
case, short circuit between lines may occur.
6
2 : If the pattern is made with less than 0.4mm, in the worst
case, short circuit between lines may occur due to spread
of soldering paste or mount placing accuracy.
3 : If the pattern is made with wider than 0.8mm (DLW21) /
1.6mm (DLW31S), the bending strength will be reduced.
0.9
2.9
With gild pattern, excess soldering heat may disolve metal of a
copper wire.
5.5
Continued on the following page.
136
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
EMIFILr (Soldering and Mounting)
Continued from the preceding page.
2. Solder Paste Printing and Adhesive Application
When reflow soldering the chip EMI suppression filter, the
printing must be conducted in accordance with the
following cream solder printing conditions.
copper foil patterns.
When flow soldering the EMI suppression filter, apply the
adhesive in accordance with the following conditions.
If too much adhesive is applied, then it may overflow into
the land or termination areas and yield poor solderability.
In contrast, if insufficient adhesive is applied, or if the
adhesive is not sufficiently hardened, then the chip may
become detached during flow soldering process.
If too much solder is applied, the chip will be prone to
damage by mechanical and thermal stress from the PCB
and may crack. In contrast, if too little solder is applied,
there is the potential that the termination strength will be
insufficient, creating the potential for detachment.
Standard land dimensions should be used for resist and
(in mm)
Series
Solder Paste Printing
Adhesive Application
BLM
BLA
oEnsure that solder is applied smoothly to a
minimum height of 0.2mm to 0.3mm at the end
surface of the part.
Coating amount is illustrated in the
following diagram.
a:20µm−70µm
b:30µm−35µm
oCoat the solder paste a thickness:
100-150µm: BLM03
c:50µm−105µm
Chip Solid Inductor
a
c
b
100-200µm: BLM15/18/21/31/41, BLA
Bonding agent
Land
PCB
NFM
NFR
NFL
VFM
oUse H60A solder for pattern printing.
oCoat the solder paste a thickness:
100-150µm: NFM18/21/3D,NFR, NFL
100-200µm: NFM41,VFM
Apply 0.1mg for NFM41C/41P/VFM and
0.06mg for NFM3DC/3DP of bonding
agent at each chip. Do not cover
electrodes.
NFL18SP
NFM21C/21P
NFR21G/NFL21S
NFM18C/18P
NFL18ST
Bonding agent
0.4
1.0
2.2
0.6
0.4
1.0
2.0
1.4
Coating position of
bonding agent
2.6
NFM3DC/3DP
NFM41C/41P/VFM
1.0
2.5
3.9
1.5
3.5
5.5
6
NFA
o Use H60A solder for pattern printing.
oCoat the solder paste a thickness: 100-200µm
NFA31G/NFA31C
2.6
0.6
0.3
0.8pitch
Continued on the following page.
137
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
EMIFILr (Soldering and Mounting)
Continued from the preceding page.
(in mm)
Series
Solder Paste Printing
Adhesive Application
NFW31S
NFE31P
oUse H60A solder for pattern printing.
NFW31S Series
Apply 0.2mg of bonding agent at each chip.
oCoat the solder paste a thickness: 150-200µm
0.6
2.2
4.2
Coating positon of
bonding agent
Bonding agent
Apply 1.0mg of bonding agent at each chip.
NFE61P
NFE61H
oUse H60A solder for pattern printing.
oCoat the solder paste a thickness: 150-200µm
1.5
4.8
1.5
4.8
8.8
Bonding agent
9.0
Bonding agent
DLP
DLW
DLM
oUse H60A solder for pattern printing.
oCoat the solder paste a thickness:
DLP31S/DLM2HG
Apply 0.3mg of bonding agent at each chip.
100-150µm: DLW21S/21H/31S/DLP11S
150-200µm: DLP31D/31S, DLM2HG, DLW5AH/5BS
DLP11S/31S
DLW21S/DLW21H/DLW31S
DLP31D
DLP31S
a
b
a
b
a
Coating Position of
Bonding Agent
Series
Series
DLW21S/H 0.8 2.6 0.5 1.2
DLW31S 1.6 3.7 0.4 1.6
a
b
c
d
a
b
c
d
Coating Position of
Bonding Agent
DLP11S 0.7 0.55 0.3 0.55
DLP31S 1.0 0.6 0.7 2.1
DLM2HG
DLP31D
0.4
Coating Position of
Bonding Agent
6
0.8
DLM2HG
DLW5AH/5BS
5.5
2.9
0.9
1.0
4.0
Continued on the following page.
138
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
EMIFILr (Soldering and Mounting)
Continued from the preceding page.
3. Standard Soldering Conditions
(1) Soldering Methods
oAllowable Flow Soldering Temperature and Time
Use flow and reflow soldering methods only.
Use standard soldering conditions when soldering chip
EMI suppression filters chip varistor.
280
270
In cases where several different parts are soldered, each
having different soldering conditions, use those
conditions requiring the least heat and minimum time.
w
260
e
250
r
q
240
(2) Soldering Temperature and Time
To prevent external electrode solder leaching and
performance deterioration, solder within the temperature
and time combinations illustrated by the slanted lines in
the following graphs. If soldering is repeated, please note
that the allowed time is the accumulated time.
230
0
5
10
15
20
25
30
Time [s]
NFE61P/H(Except NFE61HT332)
BLM(Except BLM03/15), BLA31
DLM2HG, DLP31D/S
q
w
e
Solder : H60A H63A solder(JIS Z 3238)
Flux :
VFM41R, NFM3DC/P, NFM41C/P,
NFW31S
r
o Use Rosin-based flux (when using RA type solder, clean
products sufficiently to avoid residual flux.
o Do not use strong acidic flux (with chlorine content
exceeding 0.20wt%)
oAllowable Reflow Soldering Temperature and Time
280
o Do not use water-soluble flux.
270
260
250
240
230
q
w
e
r
0
20
30
40
50
Time [s]
60
70
80
90
NFE31P/NFE61P/H
BLM/BLA
q
w
e
DLM2HG, DLP31D/S, DLP11S
NFM, NFL, NFA, NFR, HFW31S, DLW,
VFM41R
r
Continued on the following page.
6
139
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
EMIFILr (Soldering and Mounting)
Continued from the preceding page.
(3) Soldering Conditions
oFlow Solder
Gradual cooling
Soldering
(in air)
Pre-heating
300
250
200
150
100
50
Max. Temp. 250°C
0
60s Min.
T
Pre-heating Soldering Soldering
Series
(150°C)
Time(T)
Temp.(C)
BLM(Except BLM03/15), BLA31
NFM3DC/P, NFM41C/P,
NFW31S, NFE61P/H*,
DLM2HG, DLP31D/31S
VFM
10s max.
60s min.
250
5s max.
*Except NFE61HT332
oReflow Solder
Gradual cooling
Pre-heating
300
Soldering
(in air)
Max. Temp. 230°C
250
230°C
200
(4) Reworking with Solder Iron
183°C
150
100
50
The following conditions must be strictly followed when
using a soldering iron.
Pre-heating
: 150°C 60 s min.
0
T2
T1
60s Min.
Soldering iron power output
: 30W max.
Temperature of soldering iron tip / Soldering time : 280°C
max./10s max. or 300°C max./3s max.*
*NFE31PT152Z1E9/VFM : 280°C max./10 s max. only
BLM : 350°C max./3 s max.
Soldering Time
Pre-heating
(150°C)
Series
NFE31/61
T1(183°C)
T2(230°C)
250°C,20s max.
BLM, BLA
20s max.
Do not allow the tip of the soldering iron to directly
contact the chip.
NFM, NFL, NFR
NFW, NFA, DLM/P/W
VFM
60s min. 60s max.
10s max.
For additional methods of reworking with to soldering iron,
please contact Murata engineering.
4. Cleaning
Following conditions should be observed when cleaning
chip EMI filter.
b) Aqueous cleaning agent
Surface active agent (Clean Thru 750H)
Hydrocarbon (Cold Cleaner 375)
(1) Cleaning Temperature : 60°C max. (40°C max. for
alcohol type cleaner)
High grade alcohol (Pine Alpha ST-100S)
*VFM41R series cannot be cleaned with high grade
alcohol type aqueous cleaning agent.
(2) Ultrasonic
Output
: 20W/liter max.
6
Duration : 5 minutes max.
Alkaline saponifier (Aqua Cleaner 210SEI-cleaner
should be diluted within 15% using deionized water.)
(4) Ensure that flux residue is completely removed.
Component should be thoroughly dried after aqueous
agent has been removed with deionized water.
(5) Some products may become slightly whitened.
However, product performance or usage is not affected.
For additional cleaning methods, please contact Murata
engineering.
Frequency : 28kHz to 40kHz
(3) Cleaning agent
The following list of cleaning agents have been tested on
the individual components. Evaluation of final assembly
should be completed prior to production.
Do not clean DLW21S/31S/5AH/5BS series.
In case of cleaning, please contact Murata engineering.
a) Alcohol cleaning agent
Isopropyl alcohol (IPA)
140
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Lead Type EMIFILr (Soldering and Mounting)
1. Mounting Hole
Mounting holes should be designed as specified below.
Part number
Bulk type (in mm)
Taping type (in mm)
ø0.8-3
DSN6
DSS6
VFR3V
VFS6V
2.5±0.2
2.5±0.2
DSN9
ø0.8-3
DSN9H
2.5±0.2
2.5±0.2
ø1.0-3
DST9
ø0.8-3
DST9H
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
DSS9
ø0.8-3
DSS9H
VFS9V
2.5±0.2
2.5±0.2
BNX
[Component Side]
[TERMINAL LAYOUT (Bottom figure)]
ø1.2
(PSG)
(B)
CB
CG
(CG)
(CG)
CG
(CG)
(CB)
2.5±0.1
5.0±0.1
7.5±0.1
PSG : Power supply ground
CG : Load circuit ground
CB : Load circuit + Bias
PSG
B
2. Using THE block type EMIFILr effectively
The block type EMIFILr effectively prevents unwanted
reflections and external noise from entering the
[P.C.B. BOARD PATTERNS]
Use a bilateral P.C. board. Insert the BNX into the P.C.board until
the root of the terminal is secured. then solder.
equipment circuitry and power lines by grounding all the
high frequency components which make up the noise.
Therefore, if grouding is improperly done, the filters may be
unable to achieve the performance they are capable of.
(1) FRONT VIEW
(2) BOTTOM VIEW
PSG
B
B
PSG
6
To prevent this, be sure to observe the following instructions.
(1) When designing the P.C. board, use all the available
grounding terminals, and arrange the grounding circuit
so that the area of the foil for the grounding circuit is
maximized.
Shield plate
PSG
B
B
PSG
CG
CG
CB
CG CG
CB
CG
CG
(2) Minimize the distance between the P.C. board ground
and the filter's grounding plate. Use through-hole P.C.
boards.
PSG: Power supply ground
CG : Load circuit ground
CB : Load circuit + Bias
(3) Whichever P.C. board is used, push the filter into the
P.C. board up to the terminal roots.
(4) Do not connect PSG to CG by any other means except
through the filter. (See the item 1. TERMINAL LAYOUT)
Continued on the following page.
141
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Lead Type EMIFILr (Soldering and Mounting)
Continued from the preceding page.
3. Using EMIGUARDr effectively
(1) Terminal (with mark) should be connected to the line of
incoming electrostatic surge. (There is polarity.)
Example of input terminal
Example of output terminal
Otherwise, no effect in ESD suppression can be
expected. (VFR3V)
incoming
Electrostatic Surges
incoming
Electrostatic Surges
(2) Products should be used at rated voltage or less and
rated current or less.
(3) Products should not be applied for the absorption of
surges which have large energy (ex. induced lightning
surges, switching surges) because it is designed for the
absorption of electrostatic surges. (VFR3V)
(4) Electrostatic test should be done on the following
conditions. (VFR3V)
n • [ C / R • V2 ]2 < 8.0 ×105
n : Times applies
C : Charging Capacitance (pF)
V : Testing Voltage (kV)
R : Charging Resistance (Ω)
4. Soldering
(1) Use Rosin-based flux. Do not use strong acidic flux with
halide content exceeding 0.2 (wt)% (chlorine conversion
value).
[Flow Soldering]
Gradual cooling
Preheating (in air) Soldering
(in air)
300
250
200
150
100
50
240 to 260°C
(2) Standard flow soldering profile.
(3) Products and the leads should not be subjected to any
mechanical stress during the soldering process, or while
subjected to the equivalent high temperatures.
1 minutes min.
5s. max.
Pre-heating
150˚C, 60 seconds min.
Solder Temperature 240 - 260°C, 5 seconds within
5. Cleaning Conditions
Do not clean VFR3V, PLT09H and VFS6Vseries.
Clean other parts in the following conditions.
(1) Cleaning temperature should be limited to 60°C
max.(40°C max for alcohol type cleaner.)
(2) Ultrasonic cleaning should be comply with the following
conditions, avoiding the resonance phenomenon at the
mounted products and P.C.B.
• Hydrocarbon Type (COLDCLEANER 375)
• Higher Alcohol Type (PINE ALPHA ST-100S)
• Alkali Saponification Type
(*AQUACLEANER 210SEI)
* Alkali saponification should be diluted to 15%
volume with de-ionized water.
(4) There should be no residual flux or residual cleaner after
cleaning.
Power : 20 W / l max. Frequency : 28kHz to 40kHz
Time : 5 min. max.
In the case of using aqueous agent, products should be
dried completely after rinsing with de-ionized water in
order to remove the cleaner.
(3) Cleaner
6
a) Alcohol type cleaner
• Isopropyl alcohol (IPA)
(5) Other cleaning : Please contact us.
b) Aqueous agent (PLT series cannot be cleaned)
• Surface Active Agent Type
(CLEANTHROUGH 750H)
142
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Chip EMIFILr Packaging
Minimum Quantity and Dimensions of 8mm Width Paper / Plastic Tape
<plastic>
2
2.0±0.1
c
4.0±0.1 4.0±0.1 ø1.5+0.1
1
<paper>
-
0
d
c
Direction of feed
There are holes in the cavities of the BLM21BD222SN1/
b
1 BLM15, BLA2A: 2.0±0.1
2 NFE31, NFW31, DLP11S: 2.0±0.05
3 NFE31, NFW31, DLP11S: 3.5±0.05
+0.3
BD272SN1 and BLM31 only. ø1.0
-0
Minimum Qty. (pcs.)
ø330mm reel
Cavity Size
Part Number
ø180mm reel
Bulk
a
b
c
d
-
Paper Tape
15000
Plastic Tape
Paper Tape
Plastic Tape
-
0.70
1.15
0.40
0.65
0.55
0.8
1.1
0.75
1.1
1.3
1.3
1.75
0.8
1.1
-
-
-
-
1000
1000
BLM03
BLM15
-
10000
50000
BLM18
1.85
2.25
3.5
1.05
1.45
1.9
-
4000
-
10000
-
1000
1000
1000
(BLM18E_TN1)
-
4000
-
10000
-
10000
10000
8000
-
BLM21
(BD222SN1/BD272SN1)
0.2
0.2
-
3000
3000
2500
-
-
-
-
BLM31
(AF700SN1)
-
-
-
2.2
3.4
1.2
1.8
-
-
10000
4000
1000
1000
BLA2A
BLA31
-
10000
-
NFM18/NFL18S
NFM18PC (Except 105R)
0.9
-
4000
-
-
-
500
1.85
1.05
500
500
500
100
500
500
-
1.1
1.1
0.85
1.1
2.0
0.7
2.0
1.3
0.98
1.3
1.4
1.1
2.1
-
4000
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
NFL18ST/NFM18PC105R
NFM21/NFL21S
NFM3DC/3DP
NFA31G/31C
NFE31P
-
-
2.3
3.4
3.5
3.6
2.3
3.6
2.75
1.4
3.5
2.25
2.3
3.6
1.55
1.4
-
4000
0.2
-
-
4000
-
-
2.0
4000
-
1.9
0.2
0.25
0.2
0.25
0.25
0.25
0.3
0.25
0.3
-
-
-
-
-
-
-
-
-
2000
4000
2000
3000
3000
3000
2000
3000
2000
8000
1.55
1.9
-
NFR21G
7500
NFW31S
1000
500
500
500
500
500
2.25
1.2
-
-
-
-
-
-
DLM2HG
DLP11S
1.9
DLP31D/31S
DLW21S
1.45
1.55
2.0
DLW21H
DLW31S
• Please contact us for BLM15/18 in bulk case.
(in mm)
Continued on the following page.
6
143
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Chip EMIFILr Packaging
Continued from the preceding page.
Minimum Quantity and Dimensions of 12mm Width Plastic Tape
c
2.0±0.1
4.0±0.1 4.0±0.1
ø1.5 +0.1
-
0
Cavity Size
b
Minimum Qty. (pcs.)
0.3
Part Number
a
c
ø180mm reel ø330mm reel
Bulk
1000
500
4.8
4.8
7.2
4.8
1.9 1.75
2500
4000
2500
2500
8000
BLM41
NFM41
NFE61
VFM41R
1.8
1.1
-
8000
-
1.9 1.75
1.8 1.35
500
500
Direction of feed
b
There are holes in the cavities
of the BLM41 only. ø1.5 +0.3
-
0
c
2.0±0.1
8.0±0.1 4.0±0.1
ø1.5+0.1
0.3
-
0
Cavity Size
Minimum Qty. (pcs.)
Part Number
a
b
c
ø180mm reel ø330mm reel
Bulk
100
100
5.4
5.5
4.1
5.4
4.4
4.7
400
400
1500
1500
DLW5AH
DLW5BS
b
Direction of feed
ø1.5+0.3
-0
(in mm)
6
144
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Ferrite Beads Inductors Packaging
Minimum Quantity (Pcs.)
Series
Bulk
Ammo Pack
ø320mm Paper reel
BL01RN
BL02RN
BL03RN
500
1000
2000
—
500
1500
1000
2000
—
Taping Dimensions
ø0.60
5±0.3
BL01RN
BL02RN1R2p1A
∆S
0 max.
7.5 max.
3.4±0.2
P2
P
∆h2
∆h1
ød
P1
F
3.2 min
0.8 max.
0.8 max.
L1
L2
*L
6.0±1.0
D0
| L1 - L2 | V 1.5
P0
There is a excess bond stick on the wire.
*L BL01RN1A1F1J : 52+2/-1
BL01RN1A1E1A : 26+1.5/-0
8.0 max.
3.4±0.2
BL02RN1R3N1A
BL02RN2R1p1A
∆S
∆S
3.4±0.2
9.0 max.
P2
P
P2
P
∆h2
∆h1
∆h2
∆h1
ød
ød
P1
F
F
P1
D0
D0
There is a excess bond stick on the wire.
P0
P0
BL02RN2R3N1A
BL03RN2R1p1A
∆S
∆S
2.3 max.
9.0 max.
8.3 max.
P2
P
3.4±0.2
P2
P
∆h2
∆h2
∆h1
∆h1
ød
F
ød
P1
F
P1
D0
D0
P0
P0
Description
Symbol
P
Dimension (mm)
12.7
Remarks
Pitch of component
Pitch of sprocket hole
Lead spacing
Product inclination ∆S determines tolerance
P0
12.7±0.2
+0.8
F
5.0
-
0.2
Hole center to lead
P1
3.85±0.7
6.35±1.3
±1.0
Hole center to component center
Deviation along tape, left or right
Carrier tape width
P2
Tape deviation in feeding direction
∆S
W
18.0±0.5
+0
Position of sprocket hole
W1
9.0 0.0
Tape with deviation
BL02, BL03
-
0.5
Lead Length Number : N 16.5±0.5
Lead length between sprocket
hole and forming position
6
Lead Length Number : Q 20.0±0.5
H1
BL02RN***P1A
BL03RN
Lead Length Number : P 18.5±0.5
Protruding length
I
+0.5 to –1.0
ø4.0±0.1
ø0.60
Diameter of sprocket hole
Lead Diameter
D0
ød
t
Total tape thickness
0.7±0.2
Including bonding tape thickness
Deviation across tape, Deviation across tape rear ∆h1, ∆h2
1.0 max.
+0
Cutting position of failure
Hold down tape width
Hold down tape position
L
11.0 0.0
-
1.0
W0
W2
12.0±0.5
1.5±1.5
(in mm)
145
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Disc Type EMIFILr and EMIGUARDr Packaging
Minimum Quantity
Lead Type Code
Minimum Order Quantity (order in sets only) (Pcs.)
Lead Type code
Lead length (H)
Part Number
Incrimp Type
Straight Type
Q91
ø320mm
Paper reel
Ammo Pack
Bulk (Bag)
-
20.0±1.0mm
16.5±1.0mm
18.5±1.0mm
VFR3V Series
2000
2000
2000
—
—
—
250
250
250
200
200
200
Q92
U21
U31
DS 6/VFS6V Series
DSN9/9H Series
DST9/9H Series
DSS9/9H Series
VFS9V Series
Q93
1
2
1000
1000
—
—
800
800
1 : Q92, Q93
2 : Q91
Taping Dimensions
DSS6_Q91/Q92/Q93
DSN6_Q91/Q92/Q93
DSN9_Q91/Q92/Q93
DSN6_ : 2.54 max.
DSN9_ : 4.0 max.
DSN6_ : 7.0 max.
DSN9_ : 9.5 max.
5.0+0.8/-0.2
2.5+0.4/-0.2
5.0+0.8/-0.2
2.5+0.4/-0.2
6.35±1.3 12.7
0±1.0
2.54 max.
1.0 max.
1.0 max.
1.0 max.
8.0 max. 0±1.0
6.35±1.3 12.7
*1
1.0 max.
*2
3.85±0.7
11.0+0/-1.0
1.5±1.5
3.85±0.7
11.0+0/-1.0
ø0.6
ø0.6
2.5+0.4/-0.2
+0.5 to -1.0
+0.5 to -1.0
ø4.0±0.1
ø4.0±0.1
12.7±0.2
12.7±0.2
H
H
Q91 Type : 20±1.0
Q92 Type : 16.5±1.0
Q93 Type : 18.5±1.0
Q91 Type : 20±1.0
Q92 Type : 16.5±1.0
Q93 Type : 18.5±1.0
*1 There may be a hole on the top of ferrite beads,
which cause no characteristics deterioration.
*2 Bottom of the ferrite beads may not be level with each other.
DSS6_U21/U31
VFS6V_U31
DST9_Q91/Q92/Q93
5.0+0.8/-0.2
6.35±1.3
4.0 max.
2.5+0.4/-0.2
2.54 max.
1.0 max.
5.0+0.8/-0.2
6.35±1.3 12.7
2.5+0.4/-0.2
8.0 max 0±1.0
12.7
1.0 max.
9.5 max. 0±1.0
1.0 max.
1.0 max.
*1
*2
3.85±0.7
3.85±0.7
11.0+0/-1.0
11.0+0/-1.0
ø0.6
ø0.6
2.5+0.4/-0.2
2.5+0.4/-0.2
+0.5 to -1.0
+0.5 to -1.0
ø4.0±0.1
ø4.0±0.1
12.7±0.2
12.7±0.2
H
H
Q91 Type : 20±1.0
Q92 Type : 16.5±1.0
Q93 Type : 18.5±1.0
U21 Type : 16.5±1.0
U31 Type : 18.5±1.0
*1 There may be a hole on the top of ferrite beads,
which cause no characteristics deterioration.
*2 Bottom of the ferrite beads may not be level with each other.
VFR3V_U31
DSS9_Q91/Q92/Q93
VFS9V_Q91/Q92/Q93
6
5.0+0.8/-0.2
2.5+0.4/-0.2
7.5 max.
2.5+0.4/-0.2
2.3 max.
1.0 max.
6.35±1.3
8.0 max. 0±1.0
12.7
0±1.0
12.0 max.
6.35±1.3 12.7
1.0 max.
1.0 max.
1.0 max.
AY
AY
AY
*1
3.85±0.7
ø0.45±0.1
1.5±1.5
11.0+0/-1.0
3.85±0.7
11.0+0/-1.0
2.5+0.4/-0.2
ø0.6
2.5+0.4/-0.2
5.0+0.8/-0.2
(1)(2)(3)
+0.5 to -1.0
+0.5 to -1.0
ø4.0±0.1
12.7±0.2
ø4.0±0.1
12.7±0.2
H
Q91 Type : 20±1.0
Q92 Type : 16.5±1.0
Q93 Type : 18.5±1.0
*1 Bottom of the ferrite beads may not be level with each other.
(in mm)
146
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Chip EMI Suppression Filter Design Kits
oEKEMBL15C (Chip Ferrite Beads 0402 Size)
Impedance typ.
(at 100MHz, 20 degree C)
No.
Part Number
Quantity (pcs.)
Rated Current (mA)
DC Resistance (Ω) max.
1
2
BLM15AG100SN1
BLM15AG700SN1
BLM15AG121SN1
BLM15AG221SN1
BLM15AG601SN1
BLM15AG102SN1
BLM15BB050SN1
BLM15BB100SN1
BLM15BB220SN1
BLM15BB470SN1
BLM15BB750SN1
BLM15BB121SN1
BLM15BB221SN1
BLM15BD471SN1
BLM15BD601SN1
BLM15BD102SN1
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
10Ω (Typ.)
70Ω (Typ.)
120Ω±25%
220Ω±25%
600Ω±25%
1000Ω±25%
5Ω±25%
1000
500
500
300
300
200
500
300
300
300
300
300
200
200
200
200
0.05
0.15
0.25
0.35
0.60
1.00
0.08
0.10
0.20
0.35
0.40
0.55
0.80
0.60
0.65
0.90
3
4
5
6
7
8
10Ω±25%
22Ω±25%
47Ω±25%
75Ω±25%
120Ω±25%
220Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
9
10
11
12
13
14
15
16
oEKEMBL18A (Chip Ferrite Beads 0603 Size/ for Large-current P Type)
Impedance typ.
(at 100MHz, 20 degree C)
Quantity (pcs.)
Rated Current (mA)
DC Resistance (Ω) max.
No.
Part Number
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
120Ω±25%
220Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
5Ω±25%
200
200
200
200
100
500
500
500
300
300
200
500
500
500
200
200
200
50
0.20
1
2
BLM18AG121SN1
BLM18AG221SN1
BLM18AG471SN1
BLM18AG601SN1
BLM18AG102SN1
BLM18BA050SN1
BLM18BA100SN1
BLM18BA220SN1
BLM18BA470SN1
BLM18BA750SN1
BLM18BA121SN1
BLM18BB100SN1
BLM18BB220SN1
BLM18BB470SN1
BLM18BB600SN1
BLM18BB121SN1
BLM18BB221SN1
BLM18BB471SN1
BLM18BD121SN1
0.30
3
0.50
4
0.50
5
0.70
6
0.20
7
10Ω±25%
22Ω±25%
47Ω±25%
75Ω±25%
120Ω±25%
10Ω±25%
22Ω±25%
47Ω±25%
60Ω±25%
120Ω±25%
220Ω±25%
470Ω±25%
120Ω±25%
0.25
6
8
0.35
9
0.55
10
11
12
13
14
15
16
17
18
19
0.35
0.90
0.15
0.25
0.30
0.35
0.50
0.65
1.00
0.40
200
Continued on the following page.
147
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Chip EMI Suppression Filter Design Kits
Continued from the preceding page.
Impedance typ.
(at 100MHz, 20 degree C)
Quantity (pcs.)
No.
Part Number
Rated Current (mA)
DC Resistance (Ω) max.
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
220Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
1800Ω±25%
2500Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
33Ω±25%
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
BLM18BD221SN1
BLM18BD471SN1
BLM18BD601SN1
BLM18BD102SN1
BLM18BD182SN1
BLM18BD252SN1
BLM18HG471SN1
BLM18HG601SN1
BLM18HG102SN1
BLM18HD471SN1
BLM18HD601SN1
BLM18HD102SN1
BLM18PG330SN1
BLM18PG121SN1
BLM18PG181SN1
BLM21PG221SN1
BLM21PG331SN1
BLM31PG121SN1
BLM31PG391SN1
BLM31PG601SN1
BLM41PG181SN1
BLM41PG471SN1
BLM41PG102SN1
BLM18RK121SN1
BLM18RK221SN1
BLM18RK471SN1
BLM18RK601SN1
BLM18RK102SN1
BLM18HK471SN1
BLM18HK601SN1
BLM18HK102SN1
200
200
200
100
50
0.45
0.55
0.65
0.85
1.50
1.50
0.85
1.00
1.60
1.20
1.50
1.80
0.025
0.05
0.09
0.05
0.09
0.025
0.05
0.9
50
200
200
100
100
100
50
3000
2000
1500
2000
1500
3000
2000
1500
3000
2000
1500
200
200
200
200
200
200
100
50
120Ω±25%
180Ω±25%
220Ω (Typ.)
330Ω (Typ.)
120Ω (Typ.)
390Ω (Typ.)
600Ω (Typ.)
180Ω (Typ.)
470Ω (Typ.)
1000Ω (Typ.)
120Ω±25%
220Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
0.025
0.05
0.09
0.25
0.3
0.5
0.6
0.8
0.7
0.9
1.5
oEKEMBL21A (Chip Ferrite Beads 0805 Size)
Impedance typ.
(at 100MHz, 20 degree C)
Quantity (pcs.)
Rated Current (mA)
DC Resistance (Ω) max.
No.
Part Number
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
120Ω±25%
220Ω±25%
470Ω±25%
600Ω±25%
600Ω±25%
1000Ω±25%
1000Ω±25%
60Ω±25%
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.15
1
2
BLM21AG121SN1
BLM21AG221SN1
BLM21AG471SN1
BLM21AG601SN1
BLM21AJ601SN1
BLM21AG102SN1
BLM21AH102SN1
BLM21BB600SN1
BLM21BB750SN1
BLM21BB121SN1
BLM21BB221SN1
BLM21BB471SN1
BLM21BD121SN1
BLM21BD221SN1
BLM21BD471SN1
BLM21BD601SN1
BLM21BD102SN1
0.20
3
0.25
4
0.30
5
1.10
6
6
0.45
7
0.45
8
0.20
9
75Ω±25%
0.25
10
11
12
13
14
15
16
17
120Ω±25%
220Ω±25%
470Ω±25%
120Ω±25%
220Ω±25%
470Ω±25%
600Ω±25%
1000Ω±25%
0.25
0.35
0.45
0.25
0.25
0.35
0.35
0.40
Continued on the following page.
148
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Chip EMI Suppression Filter Design Kits
Continued from the preceding page.
Impedance typ.
(at 100MHz, 20 degree C)
No.
Part Number
Quantity (pcs.)
Rated Current (mA)
DC Resistance (Ω) max.
18
19
20
21
BLM21BD182SN1
BLM21BD222SN1
BLM21BD222TN1
BLM21BD272SN1
20
20
20
20
1800Ω±25%
2250Ω (Typ.)
2200Ω±25%
2700Ω±25%
200
200
200
200
0.50
0.60
0.60
0.80
oEKEMFL18B (Chip EMIFIL LC Combined Type)
No.
1
Part Number
NFL18ST107X1C3
NFL18ST157X1C3
NFL18ST207X1C3
NFL18ST307X1C3
NFL18ST507X1C3
NFL18SP157X1A3
NFL18SP207X1A3
NFL18SP307X1A3
NFL18SP507X1A3
NFL21SP206X1C3
NFL21SP506X1C3
NFL21SP706X1C3
NFL21SP107X1C3
NFL21SP157X1C3
NFL21SP207X1C3
NFL21SP307X1C3
NFL21SP407X1C3
NFL21SP507X1C3
Quantity (pcs.) Cut off Frequency Rated Voltage Rated Current Insulation Resistance (MΩ min.) DC Resistance max.
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
4.5Ω
4.0Ω
3.5Ω
1.8Ω
1.5Ω
3.0Ω
3.0Ω
3.0Ω
2.0Ω
8.5Ω
3.5Ω
3.0Ω
2.0Ω
2.0Ω
1.5Ω
1.2Ω
1.2Ω
1.2Ω
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
100MHz
150MHz
200MHz
300MHz
500MHz
150MHz
200MHz
300MHz
500MHz
20MHz
16 V
16 V
16 V
16 V
16 V
10 V
10 V
10 V
10 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
16 V
100mA
100mA
150mA
200mA
200mA
100mA
100mA
100mA
100mA
100mA
150mA
150mA
200mA
200mA
250mA
300mA
300mA
300mA
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
50MHz
70MHz
100MHz
150MHz
200MHz
300MHz
400MHz
500MHz
Attenuation (dB min.)
10MHz 20MHz 50MHz 100MHz 150MHz 200MHz 300MHz 400MHz 500MHz 1GHz
Quantity Cut off
(pcs.) Frequency
Rated Rated
Current Voltage
No.
Part Number
19 NFW31SP106X1E4
20 NFW31SP206X1E4
21 NFW31SP506X1E4
22 NFW31SP107X1E4
23 NFW31SP157X1E4
24 NFW31SP207X1E4
25 NFW31SP307X1E4
26 NFW31SP407X1E4
27 NFW31SP507X1E4
20
20
20
20
20
20
20
20
20
10MHz 6dB max
5
25
25
-
25
-
-
30
30
30
30
30
30
30
15
10
10
200mA 25V
200mA 25V
200mA 25V
200mA 25V
200mA 25V
200mA 25V
200mA 25V
200mA 25V
200mA 25V
20MHz
50MHz
-
-
-
-
-
-
-
-
6dB max
5
25
-
25
-
-
30
-
-
-
-
-
-
-
6dB max
10
-
30
-
-
30
100MHz
150MHz
200MHz
300MHz
400MHz
500MHz
-
-
-
-
-
-
6dB max
-
5
-
-
20
-
-
-
-
-
6dB max
-
10
20
30
-
-
-
-
6dB max
-
-
10
-
-
-
6dB max
-
5
-
-
6dB max
-
-
6dB max
oEKEMFA31B (Chip EMIFIL Capacitor Array Type/ Capacitor Type/ LC Combined Type)
6
No.
1
Part Number
NFA31CC220S1E4
NFA31CC470S1E4
NFA31CC101S1E4
NFA31CC221S1E4
NFA31CC471R1E4
NFA31CC102R1E4
NFA31CC222R1E4
NFA31CC223R1C4
NFA31GD1006R84
NFA31GD1004704
Quantity (pcs.)
Capacitance
22pF±20%
Rated Voltage
25 V
Rated Current
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
50mA
Insulation Resistance (MΩ min.)
20
20
20
20
20
20
20
20
20
20
1000
2
47pF±20%
25 V
1000
3
100pF±20%
220pF±20%
470pF±20%
1000pF±20%
2200pF±20%
22000pF±20%
10pF±20%
25 V
1000
4
25 V
1000
5
25 V
1000
6
25 V
1000
7
25 V
1000
8
16 V
1000
9
6 V
1000
500
10
10pF±20%
6 V
20mA
Continued on the following page.
149
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Chip EMI Suppression Filter Design Kits
Continued from the preceding page.
oEKEMFA31B (Chip EMIFIL Capacitor Array Type/ Capacitor Type/ LC Combined Type)
No.
11
12
13
14
15
16
17
Part Number
NFA31GD1001014
NFA31GD4706R84
NFA31GD4704704
NFA31GD4701014
MFA31GD1016R84
NFA31GD1014704
NFA31GD1011014
Quantity (pcs.)
Capacitance
10pF±20%
47pF±20%
47pF±20%
47pF±20%
100pF±20%
100pF±20%
100pF±20%
Rated Voltage
Rated Current
15mA
Insulation Resistance (MΩ min.)
20
20
20
20
20
20
20
6 V
6 V
6 V
6 V
6 V
6 V
6 V
1000
1000
1000
1000
1000
1000
1000
50mA
20mA
15mA
50mA
20mA
15mA
oEKEMDL21C (Chip Common Mode Choke Coils)
Quantity
(pcs.)
Common Mode Impedance typ.
Insulation Resistance
No.
Part Number
Rated Voltage
Rated Current
(at 100MHz, 20 degree C)
(MΩ min.)
10
10
10
10
10
10
10
10
10
10
10
10
5
67Ω (Typ.)
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
50V
10V
10V
10V
10V
10V
400mA
330mA
370mA
330mA
300mA
280mA
370mA
340mA
310mA
260mA
230mA
200mA
200mA
500mA
1000mA
1500mA
2000mA
5000mA
160mA
120mA
100mA
80mA
10
1
2
DLW21SN670SQ2
DLW21SN900SQ2
DLW21SN121SQ2
DLW21SN181SQ2
DLW21SN261SQ2
DLW21SN371SQ2
DLW31SN900SQ2
DLW31SN161SQ2
DLW31SN261SQ2
DLW31SN601SQ2
DLW31SN102SQ2
DLW31SN222SQ2
DLW5AHN402SQ2
DLW5BSN302SQ2
DLW5BSN152SQ2
DLW5BSN102SQ2
DLW5BSN351SQ2
DLW5BSN191SQ2
DLP31DN900ML4
DLP31DN131ML4
DLP31DN201ML4
DLP31DN321ML4
DLP31DN441ML4
10
90Ω (Typ.)
10
3
120Ω (Typ.)
180Ω (Typ.)
260Ω (Typ.)
370Ω (Typ.)
90Ω (Typ.)
10
4
10
5
10
6
10
7
10
8
160Ω (Typ.)
260Ω (Typ.)
600Ω (Typ.)
1000Ω (Typ.)
2200Ω (Typ.)
4000Ω (Typ.)
3000Ω (Typ.)
1500Ω (Typ.)
1000Ω (Typ.)
350Ω (Typ.)
190Ω (Typ.)
90Ω±20%
10
9
10
10
11
12
13
14
15
16
17
18
19
20
21
22
23
10
10
10
10
5
10
5
10
5
10
5
10
5
100
100
100
100
100
10
10
10
10
10
130Ω±20%
200Ω±20%
320Ω±20%
440Ω±20%
70mA
oEKEMNFMPA
No.
1
Part Number
Quantity (pcs.)
Capacitance
0.1µF±20%
Rated Voltage
Rated Current
Insulation Resistance (MΩ min.)
6
20
20
20
20
20
20
20
20
20
20
20
20
16 V
6.3 V
25 V
16 V
16 V
10 V
16 V
25 V
25 V
50 V
50 V
50 V
2A
2A
2A
2A
2A
4A
2A
6A
6A
2A
2A
2A
1000
NFM18PC104R1C3
NFM18PC105R0J3
NFM21PC104R1E3
NFM21PC224R1C3
NFM21PC474R1C3
NFM21PC105B1A3
NFM21PC105F1C3
NFE31PT152Z1E9
NFE31PT222Z1E9
NFE61PT102E1H9
NFE61PT472C1H9
NFM41PC204F1H3
2
1µF±20%
500
3
0.1µF±20%
1000
4
0.22µF±20%
1000
5
0.47µF±20%
1000
6
1µF±20%
500
7
1µF +80/-20%
1500pF +50/-20%
2200pF±50%
1000pF +80/-20%
4700pF +80/-20%
0.2µF +80/-20%
500
8
1000
9
1000
10
11
12
1000
1000
1000
Continued on the following page.
150
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Chip EMI Suppression Filter Design Kits
Continued from the preceding page.
oEKEMNFMCA
No.
1
Part Number
NFM18CC220U1C3
NFM18CC470U1C3
NFM18CC101R1C3
NFM18CC221R1C3
NFM18CC471R1C3
NFM18CC102R1C3
NFM18CC222R1C3
NFM18CC223R1C3
NFM21CC220U1H3
NFM21CC470U1H3
NFM21CC101U1H3
NFM21CC221R1H3
NFM21CC471R1H3
NFM21CC102R1H3
NFM21CC222R1H3
NFM21CC223R1H3
Quantity (pcs.)
Capacitance
22pF±20%
Rated Voltage
16 V
Rated Current
300mA
300mA
300mA
300mA
300mA
300mA
300mA
1000mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
2000mA
Insulation Resistance (MΩ min.)
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
2
47pF±20%
16 V
3
100pF±20%
220pF±20%
470pF±20%
1000pF±20%
2200pF±20%
22000pF±20%
22pF±20%
16 V
4
16 V
5
16 V
6
16 V
7
16 V
8
16 V
9
50 V
10
11
12
13
14
15
16
47pF±20%
50 V
100pF±20%
220pF±20%
470pF±20%
1000pF±20%
2200pF±20%
22000pF±20%
50 V
50 V
50 V
50 V
50 V
50 V
6
151
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Outlines of Major Noise Regulation Standards
1. EMI Regulations
Countries
Information Regulation
Japan
USA
Europe
Equipment
CISPR61000-6-3
(Residential, Commercial
and Light Industry)
IEC61000-6-4
EN50081-1
(Residential, Commercial
and Light Industry)
EN50081-2
Generic Standard
(Industrial)
(Industrial)
ITE : Information Technology
Equipment
VCCI
1
FCC Part 15
Subpart B
CISPR 22
EN55022
Printer, Personal computer
Word processor, Display
ISM equipment, Microwave
CISPR 11
CISPR 12
1
FCC Part 18
EN55011
Igniter
FCC Part 15
Subpart B
Automotive
Directive
JASO
(Automobile, Motorboat)
FCC Part 15
Subpart B
TV, Radio, Audio, VTR
CISPR 13
1
EN55013
Household electrical
equipment
CISPR 14
CISPR 15
ITU-T
1
1
EN55014
EN55015
Portable tool
Fluorescent Lamp, Luminary
Transceiver
Radio Act
ARIB
FCC Part 15
Subpart C
ETS300 Series
(Voluntary Ragulation)
FCC Part 22
(Reference) Power Supply
Higher Harmonic
Industrial Voluntary
Regulation
IEC61000-3
IEC61000-4
EN61000-3
In the process of
Regulating at JIS
Basic Standard
EN61000-4 Series
IEC61000-6-1
(Residential, Commercial
and Light Industry)
IEC61000-6-2
EN50082-1
(Residential, Commercial
and Light Industry)
EN50082-2
In the process of
Regulating at JIS
Generic Standard
(Industrial)
(Industrial)
Industrial Process Measurement
and Control Equipment
Industrial Voluntary
Action
Radio, TV
CISPR 20
CISPR 24
EN55020
EN55024
ITE : Information Technology
Equipment
1 Electrical Appliance and Material Safety Law
There are EMI regulations in each country to meet EMI
noise levels emitted from digital equipment.
In the countries which regulate EMI, equipment which does
not satisfy with regulations is not allowed to be sold.
Continued on the following page.
152
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Outlines of Major Noise Regulation Standards
Continued from the preceding page.
2. Measurement Point and Noise Detection
Regulation
Measuring Item
Polarization and Measuring Point
Frequency (Hz)
30M to 1GHz
Detection
Measuring Devices
Radiated Interference
Horizontal Pol. Vertical Pol.
Quasi-Peak Detection
Antenna
CISPR 22/
EN55022
Main Interference Voltage AC Main Ports
150k to 30MHz
30M to 1GHz
Quasi-Peak Detection Mean Detection Artificial Main Network
Quasi-Peak Detection Dipole Antenna
Radiated Interference
Horizontal Pol. Vertical Pol.
VCCI
Main Interference Voltage AC Main Ports
150k to 30MHz
30M to 40GHz
150k to 30MHz
Quasi-Peak Detection Mean Detection Artificial Main Network
Quasi-Peak Detection Mean Detection Antenna
Radiated Interference
Horizontal Pol. Vertical Pol.
FCC Part 15
Main Interference Voltage AC Main Ports
Quasi-Peak Detection
Artificial Main Network
PeakUQuasi-PeakUAverage
(Qp)
V
V
Peak Detection
Quasi-Peak Detection
Peak Detection
Average Detection
Quasi-Peak Detection
Average Detection
t
t
Short Repetition Period
Long Repetition Period
3. Limits of CISPR 22/EN55022
(1)CISPR 22 recommends measurement at 10m distance.
However, other distance is acceptable if the limitation is
converted according to the following calculation.
[Main Terminal Interference Voltage (Power Supply)]
90
Limitation shown left is converted to limitation for 3m
79
class A Quasi-peak value
class A Mean value
73
70
50
30
66
56
60
50
Conversion
56
46
class B Quasi-peak value
class B Mean value
←
Limitation for
10m Distance
R10 (dB µ V/m)
r10 (µ V/m)
Limitation for
3m Distance
R3 (dB µ V/m)
r3 (µ V/m)
10k
100k 150k 500k 1M
5M 10M 30M 100M
R10=20 log r10
R3=20 log r3
Frequency [Hz]
R3=R10+20 (1-log3)
[Radiated Interference]
10
3
r3 =
r10
90
70
57
47
class A
class B
50
40
50
30
10M
30M
100M 230M
Frequency [Hz]
1G
On the border frequency, lower limit should be applied.
Class A Equipment : The equipment which is used in light
industrial commercial areas.
Class B Equipment : The equipment which is used in
residential areas.
Continued on the following page.
153
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Outlines of Major Noise Regulation Standards
Continued from the preceding page.
(2)Scope of CISPR 22 Regulation
[CISPR Regulations]
This regulation applies to information technology
CISPR 10 Organization, Regulations and Procedures of CISPR
equipment (ITE) which are defined as:
CISPR 11 Industrial, Scientific and Medical (ISM) Radio-Frequency
(a) Equipment that receives data from external signal
Equipment
sources;
CISPR 12 Vehicles, Motor Boats and Spark-Ignited Engine driven
(b) Equipment that processes received data;
(c) Equipment that outputs data
CISPR 13 Sound and Television Receivers
CISPR 14 Household Electrical Appliances, Portable Tools and Similar
Electrical Apparatus
(d) Equipment that has less than 600V rated voltage in
power supply
CISPR 15 Fluorescent Lamps and Iuminaries
CISPR 16 Radio Interference Measuring Apparatus and Measurement
Methods
CISPR 17 Passive Radio Interference Filters and Suppression
Components
CISPR 18 Power Transmission Cables and High Voltage equipment
CISPR 19 Microwave Ovens for Frequencies above 1GHz
CISPR 20 Immunity of Sound and TV Broadcast Receivers Veceivers
and Associated Equipment
CISPR 21 Interference to Mobile Radiocommunications in the Presence
of Impulsive Noise
CISPR 22 Information Technology Equipment
CISPR 23 Industrial Scientific and Medical (ISM) Equipment
CISPR 24 Immunity Regulation of Information Technology Equipment
CISPR 25 Receiver used on board vehicles, boats, and on devices
4. Limits of VCCI Voluntary Regulation
(1)VCCI recommend measurement at 10m distance. 3m or
30m distance measurement are also allowed.
[Main Terminal Interference Voltage (Power Supply)]
90
(2)Scope of VCCI Voluntary Regulation
This regulation applies to information technology
equipment (same as CISPR Pub.22), but the application
is excluded on the following equipment:
· Equipment for which other regulations already exist
(e.g., household electrical appliances, radio and TV
receivers)
79
class A Quasi-peak value
class A Mean value
73
70
50
30
66
56
60
50
56
46
class B Quasi-peak value
class B Mean value
· In station equipment principal purpose of which is
electrical communication
10k
100k 150k 500k 1M
5M 10M 30M 100M
· Industrial plant control system for which information
processing is a secondary system function
· Industrial, commercial and medical testing and
measuring systems for which data processing is a
secondary system function
Frequency [Hz]
[Radiated Interference]
90
· Information equipment for which CISPR is conducting
further deliberation
70
VCCI is the acronym of Voluntary Control Council for
Interference by Data Processing Equipment and
Electronic Office Machines.
class A Quasi-peak value
class B Quasi-peak value
57
47
50
40
50
30
VCCI is organized by the following organizations:
· Japan Electronics and Information Technology
Industries Association (JEITA)
10M
30M
100M 230M
Frequency [Hz]
1G
· Japan Business Machine and Information System
Industries Association (JBMIA)
· Communication and Information network Association of
Japan (CIAJ)
On the border frequency, lower limit should be applied.
Class B ITE : Equipment that designed to be used at home.
Class A ITE : Equipment that does not meet interference
limits of class B equipment, but satisfies
interference limits of class A equipment.
Continued on the following page.
154
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Outlines of Major Noise Regulation Standards
Continued from the preceding page.
5. Limits of FCC Part 15 Subpart B
(1)Class A recommend to be measured with 10m distance.
[Main Terminal Interference Voltage (Power Supply)]
Class B recommend to be measured with 3m distance.
(2)The FCC Part 15 regulation controls radiated interference
90
by establishing quasi-peak and mean value limits for fre-
quencies ranging from 30MHz to 40GHz (or maximum
79
class A Quasi-peak value
class A Mean value
73
frequency's fifth harmonic, whichever is lower).
For AC main ports, the FCC Part 15 regulation controls
main terminal interference voltage by establishing quasi-
peak value limits for frequencies ranging from 450kHz to
30MHz.
70
50
30
66
56
60
50
56
46
class B Quasi-peak value
class B Mean value
Measurement Frequency Range for Radiated Interference
10k
100k 150k 500k 1M
5M 10M 30M 100M
Frequency [Hz]
Maximum Frequency
Upper End of Measurement
the Equipment Internally
Frequency Range
Generates, Uses or Operates
(MHz)
[Radiated Interference]
or Synchronizes (MHz)
90
Less than 1.705
1.705 to 108
108 to 500
30
Noise level is regulated up to lower
frequency of the 5th harmonics of
maximum signal frequency and 40GHz.
1000
2000
5000
70
50
30
500 to 1000
60
class A
Maximum Frequency's Fifth
Harmonic or 40GHz,
Whichever is Lower
56.9
54
49.5
40
54
43.5
Over 1000
46
class B
960M
1G
10M
30M
88M100M 216M
Frequency [Hz]
On the border frequency, lower limit should be applied.
Class A Equipment : The digital equipment that is sold to in the
commercial, industrial and office use.
Class B Equipment : The digital equipment that is sold to be
used in residential area.
(3)There is no regulation on power interference.
[FCC Regulations]
Part 1 Procedures
Part 2 Frequency Division and Radio Wave Treaty Issues and
General Rules
Part 15 Radio Wave Equipment
• Intentionally electromagnetic radiation equipment
• Non-intentionally electromagnetic radiation equipment
• Incidentally electromagnetic radiation equipment
Part 18 Industrial, Scientific and Medical Equipment
Part 22 Public Mobile Wireless Operations
Part 68 Connecting Terminal Equipment to Telephone Circuit Network
Part 76 Cable Television
Continued on the following page.
155
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Outlines of Major Noise Regulation Standards
Continued from the preceding page.
6. Immunity Regulations in Europe Union
All electric/electronic equipment cannot be sold in Europe
All products which are sold in EU must satisfy EC directive which
without CE marking. To use CE marking, they must
contains immunity regulation.
satisfy related EC directives such as EMC directives.
For Information Technology Equipment, in EMC directive,
emission regulations are integrated, and immunity
regulations are applied. Although these immunity
regulations are prepared by CENELEC, almost all
contents are same as standards issued by IEC or CISPR.
Principal EC Directive
89/336/EEC
92/31/EEC
EMC Directive
Low-Voltage Electrical
Products Directive
73/23/EEC
Machines Directive
89/392/EEC
7. Immunity Regulations in Japan
Equipment
Association
JEITA (Japan Electronis and Information Technology)
TV,Radio,Audio
ITE
Office Machine
JBMIA (Japan Business Machine and Information System Industries Association)
CIAJ (Communication and Information network Association of Japan)
ARIB (Association of Radio Industories and Business)
Mi
Machine To Builders
JMTBA (Japan Machine Tool Builders' Association)
JEMIMA (Japan Electric Measuring Instruments Manufacturers' Association)
JARA (Japan Robot Association)
Industrial Measuring Control Equipment
Industrial Robot
Classification
Terms
Information Regulation
JIS
The table on the right shows the preparation situation of
JIS for EMC. At this moment, the immunity standards by
JIS does not have a legal force like Electrical Application
and Material Safety Law/VCCI.
ISO60050-161
(IEV terms 161)
JIS C 0161
IEC61000-4- 2
IEC61000-4- 3
IEC61000-4- 4
IEC61000-4- 5
IEC61000-4- 6
IEC61000-4- 7
IEC61000-4- 8
IEC61000-4-11
IEC61000-4-14
IEC61000-4-17
JIS C 1000-4-2
JIS C 1000-4-3
JIS C 1000-4-4
JIS C 1000-4-5
JIS C 1000-4-6
JIS C 1000-4-7
Basic Standard
Under preparation
IEC61000-6-1
IEC61000-6-2
Generic Standard
156
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Noise Suppression Principles by DC EMIFILr
1. Function of DC EMI Suppression Filters
DC EMI suppression filters absorb and eliminate high fre-
quency noise which may produce electromagnetic
interference in PC board circuits.
These filters are used in secondary circuits, and are small
in size and light in weight, which further enhances their
excellent noise suppression functions.
Chip and adhesive type filters can be mounted on PC
boards automatically.
These filters are effective in the suppression of radiation
noise in computers, peripheral equipment, and digital
circuit application equipment (including various types of
microcomputer application equipment), and function to
suppress noise in audio/visual equipment, which uses
digital memory chips and DSP.
These filters are also effective for improving the noise
immunity of equipment used in noisy environments (such
as electronic equipment for automobiles).
2. Noise Filter Suppression Principles
Generally, noise problems occur when the noise source
[EMI Propagation Mode and Model of Noise Filter Suppression]
and electronic equipment sensitive to the influence of
noise are located in close proximity to one another.
r
In such situations, as shown in Figure at right, noise is
q
conducted through a conductor, which produces an
Equipment or Device
Affected by EMI
EMI Source
e
inductive field around the noise source.
To overcome such noise problems, it is preferable to
reduce the amount of noise generated by the noise
source or improve the noise resistance of adjacent
equipment.
w
qConduction mode eConduction mode Radiation mode
wRadiation mode
rRadiation mode
Conduction mode
In order to satisfy equipment performance specifications
and eliminate noise effectively at the same time, however,
it is customary to reduce the amount of noise generated
by the noise source, if it can't be eliminated altogether.
r
EMI Filter
EMI Filter
q
e
Equipment or Device
Affected by EMI
EMI Filter
EMI Filter
EMI Source
Shield
w
Shield
3. Configuration of EMI Suppression Filters (DC)
DC EMI suppression filters are used to suppress noise
produced by conductors. Noise radiation can be
suppressed, if it is eliminated with a filter in advance.
Generally, such noise suppression is achieved with DC
EMI suppression filters, according to the capacitive and
inductive frequency characteristics of the respective
conductors in the circuit.
Filters of this kind can be roughly divided into those :
(1) employing a capacitor,
(2) employing an inductor,
(3) employing a capacitor and inductor combination.
Continued on the following page.
157
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Noise Suppression Principles by DC EMIFILr
Continued from the preceding page.
4. Capacitive Noise Suppression
When a capacitor is connected (bypass capacitor) to
[Capacitive Noise Suppression]
ground from a noisy signal line or power line, the circuit
impedance decreases as the frequency increases. Since
noise is a high frequency phenomenon, it flows to ground
1
2πfc
Noise+Signal/DC Power
Noise
Signal/DC Power
=
Z
if a capacitor has been connected to ground, thereby
making it possible to eliminate noise. (See Fig.)
EMI suppression filters employing a capacitor in this way
are used to eliminate this type of noise.
f
: Frequency
c : Capacitance Value
5. High frequency Capacitor Characteristics Used
for EMI Suppression Filters
[Equivalent circuit of general-purpose capacitor and 3
terminal capacitor in the high frequency area and
comparison of insertion loss]
Even general-purpose capacitors can be used for noise
suppression. However, since noise has an extremely high
frequency range, general-purpose capacitors may not
function as effective bypass capacitors, due to the large
residual inductance built into the capacitor.
(a) Construction of capacitor
All the capacitors used in MURATA's EMI suppression
filters employ a 3 terminal structure or thru-type structure,
which functions effectively even at high frequencies,
thereby minimizing the influence of residual inductance.
Consequently, an effective filter circuit can be formed
even at frequencies exceeding 1GHz. (Refer to Fig.)
2-terminal capacitor
3-terminal capacitor
Dielectric
Dielectric
Electrode
Electrode
Lead
Lead
(b) Equivalent circuit of capacitors which is concerning ESL effect.
(c) Improvement of Insertion Loss Characteristics
0
C=2200pf
20
40
60
80
1
5
10
50 100
500 1000
Frequency [MHz]
6. Inductive Noise Suppression
When an inductor is inserted in series in a noise
producing circuit (See Fig.), its impedance increases with
frequency. In this configuration it is possible to attenuate
and eliminate noise components (high frequency
components). The MURATA EMI suppression filter
functions in this way.
[Inductive Noise Suppression]
Noise
Noise+Signal/DC Power
Signal/DC Power
=
Z
2πfL
f : Frequency
L : Capacitance Value
Continued on the following page.
158
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Noise Suppression Principles by DC EMIFILr
Continued from the preceding page.
7. Characteristics of Inductors Used
in EMI Suppression Filters
[Equivalent Circuit]
General-purpose inductors also function to suppress
R(f)
noise when configured in series with a noise producing
circuit. However, when general-purpose inductors are
used, resonance may result in peripheral circuits, signal
(Resistance element becomes dominant at high frequency.)
wave forms may become distorted, and satisfactory
impedance may not be obtained at noise frequencies
(due to insufficient high frequency impedance
[Example of impedance frequency characteristics of
characteristics).
inductor type EMIFILr]
The inductors used for MURATA's EMI suppression filters
are designed to function nearly as a resistor at noise fre-
BL02RN2
quencies, which greatly reduces the possibility of
160
resonance and leaves signal wave forms undistorted.
140
And since sufficient impedance is obtained for
120
frequencies ranging to hundreds of MHz, these
Z
100
specifically designed inductors operate effectively to
R
80
suppress high-frequency noise. (See Fig.)
60
40
X
20
0
0.5
1
2
5
10 20 50 100 200 5001000
Frequency [MHz]
8. Capacitive-Inductive EMI Suppression Filters
If capacitive and inductive suppression characteristics are
combined, it is possible to configure a much higher
performance filter. In signal circuit applications where this
combination is applied, noise suppression effects which
have little influence on the signal wave form become
possible.
This type of filter is also effective in the suppression of
high-speed signal circuit noise. When used in DC power
circuits, capacitive-inductive filters prevent resonance
from occurring in peripheral circuits, thus making it
possible to achieve significant noise suppression under
normal service conditions.
9. Other EMI Suppression Filters
In addition to the capacitive-inductive filter, MURATA also
has an EMI suppression filter (EMIGUARDr) combining
a capacitor with a varistor, useful for surge absorption;
and a common mode choke coil effective, for common
mode noise suppression.
MURATA also has a range of built-in filter connectors
which greatly reduce filter mounting space requirements.
Continued on the following page.
159
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Noise Suppression Principles by DC EMIFILr
Continued from the preceding page.
10. Expressing EMI Suppression Filter Effects
EMI Suppression Filter effects are expressed in terms of
[Measuring Circuit of Insertion Loss]
the insertion loss measured in the circuit, normally
specified in MIL-STD 220A. As shown in the 50Ω
Measuring Circuit of Insertion Loss
impedance circuit in the Figure at right, insertion loss is
50Ω
(a)
represented by the logarithmic ratio of the circuit output
voltage with and without a filter in the circuit, which is
B(V)
50Ω
50Ω
A(V)
A(V)
multiplied by 20 and expressed in dB.
Therefore, an insertion loss of 20dB indicates an output
voltage ratio (B/C) of 1/10, and an insertion loss of 40dB
indicates an output voltage ratio (B/C) of 1/100.
50Ω
(b)
EMI
Suppression
Filter
C(V)
B
Insertion Loss = 20 log (dB)
C
160
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Mura ta EMI Filte r Se le c tion Sim ula tor Ve r.2.5.0
Mura ta EMI Filte r Se le c tion Sim ula tor Ve r.2.5.0
Recommended Chip Ferrite Beads Search procedure has been added
Simulation results with various charts are quickly displayed on your PC.
Results can be displayed in standard format or user defined scaling.
Simulates various types of circuit such as Differential ModeTransmission, ceramic
capacitor, EMIFILr three terminal capacitor AND chip ferrite beads.
•
•
•
Select circuit.
1
1
(Select a new simulation
circuit from File menu.)
Provides a simulation function that select best suited Chip Ferrite Beads.
•
Select circuit.
1
Enter
"Input Signal".
2
2
7
4
5
2
3
6
Select a new simulation circuit from File
menu.
Set Driver IC.
3
3
Select filter.
4
4
Filters can be selected from
"frequency-impedance
characteristics" charts.
4
8
(EMI filters or/and chip
capacitor from the pull-
down list.)
Set
5
5
Two ways of setting the
driver/receiver IC parameter
The logic IC of TTL and CMOS can
be selected from pull-down list or
the LCR values can also be created.
Impedance automatically
calculated.
Impedance characteristics of
transmission line are automatically
calculated.
Transmission
Line.
Simulation results are shown
in the window.
9
Set
Receiver IC.
6
6
Click
measuring
point.
7
7
Find Recommended Ferrite Beads
Find Recommended Ferrite Beads
NEW
(Only for chip ferrite bead)
The software will recommend the most appropriate ferrite
beads solution based on specified search condition.
Click
"Start
8
8
Simulation"
button.
Simulation
results are
displayed.
9
9
The recommended parts will be displayed along with electrical
characteristics, the voltage waveform and spectrum chart.
EMIFILr is the trademark of Murata Manufacturing Co., Ltd.
This simulator can be downloaded from Murata web site.
http://www.murata.com/emi/
161
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C31E9.pdf 03.3.12
Note:
1. Export Control
For customers outside Japan
<
>
Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive
weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons.
For customers in Japan
<
>
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially
high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use
in applications other than those specified in this catalog.
q Aircraft equipment
w Aerospace equipment
e Undersea equipment
t Medical equipment
u Traffic signal equipment
o Data-processing equipment
r Power plant equipment
y Transportation equipment (vehicles, trains, ships, etc.)
i Disaster prevention / crime prevention equipment
! Application of similar complexity and/or reliability requirements to the applications listed in the above
3. Product specifications in this catalog are as of January 2003. They are subject to change or our products in it may be discontinued without advance notice.
Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or
product engineers.
4. Please read rating and
CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or
transact the approval sheet for product specifications before ordering.
6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.
http://www.murata.com/
He a d O ffice
In te rn a tio n a l Divisio n
2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111
3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp
相关型号:
©2020 ICPDF网 联系我们和版权申明