BLED35W-012-C3000 [ETC]
Budget Series Switch Mode LED Drivers;
| 型号： | BLED35W-012-C3000 |
| 厂家： | 
ETC |
| 描述： | Budget Series Switch Mode LED Drivers |
| 文件： | 总2页 (文件大小：548K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
BLED-35W Series
Budget Series Switch Mode LED Drivers
Constant Current with Isolation
Black Magic Thermal Advantage™ Plastic Housing
Electrical Specifications
Input Voltage Range:
100-277 Vac Nom. (90-305 V Min/Max)
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
Inrush Current:
Input Current:
Maximum Power:
Line Regulation:
Load Regulation:
THD:
>0.90 @ full load, 120V; >0.80 @ full load, 277V
<25 A max @ 230 Vac, cold start 25ºC
0.35 A max @ 120 Vac; 0.18 A max @ 230 Vac
35W
± 4%
± 5%
<_ 20% @ full load
Leakage Current:
Hold Up Time:
Start-up Time:
Output Protection:
300 µA Typical
Half Cycle
< 1.0 S
• Smaller footprint than our standard drivers
• Total Power: 35 Watts
Over-Voltage, Over-Current, Short Circuit (auto-recovery)
• Input Voltage: 100-277 Vac
• Indoor Applications, IP64
• UL Dry or Damp Location Rated
• 2 year Warranty
Environmental Specifications
Minimum Starting Temp: -30ºC
Storage Temperature:
Maximum Case Temp.
Humidity:
-40ºC to +85ºC
90°C
5% to 95%
Cooling:
Convection
Sound Rating:
Vibration Frequency:
MTBF:
Class A
5 to 55 Hz/2g, 30 minutes
580,000 Hours @ full load, 40ºC per MIL-217F Notice 2
Impact Resistance:
Weight:
1g/s
5.8 oz (165 g)
Constant Current - Product Specifications
Output Current Output Voltage Max. Output Typical
Model Number
(mA ±5%)
Range (Vdc)
120-200
60-100
42-70
Power (W) Efficiency
BLED35W-200-C0170
BLED35W-100-C0360
BLED35W-070-C0500
BLED35W-063-C0550
BLED35W-054-C0640
BLED35W-048-C0700
BLED35W-043-C0810
BLED35W-036-C1000
BLED35W-030-C1200
BLED35W-024-C1500
BLED35W-022-C1600
BLED35W-018-C2000
BLED35W-012-C3000
170
34
36
35
35
35
34
35
36
36
36
35
36
36
89
89
89
88
88
87
87
86
86
85
84
84
83
360
500
550
38-63
640
32-54
700
29-48
810
26-43
1000
1200
1500
1600
2000
3000
21-36
18-30
14-24
13-22
10-18
7-12
Class 2:
US/Canada
US Only
E332160
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Rev 8-12-15
Thomas Research Products • 1215 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
BLED35W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 2 of 2
Dimensions - mm
[
]
3.74 95
[ ]
0.20 5
[
]
5.91 Min 150 Min
DC Output
Red (+)
Blue (-)
HOT SPOT
AC Input
White (N)
Black (L)
0.39±0.04
[
]
10.0±1
[ ]
0.20 5
[
]
5.91 Min 150 Min
[
]
1.87 47.5
[
]
0.39 10
[ ]
1.61 41
WIRE SPECS:
Input Leads: 18 AWG, rated 600 V, 105C, min.
Output Leads: 18 AWG, rated 300 V, 105C, min.
All wires are stranded with solder dipped ends.
Lifetime / Case Temperature
Safety and EMC Compliance
135
120
105
90
75
60
45
30
15
0
UL/CUL
C E
UL8750, CSA-C22.2
EN61347
FCC, 47CFR Part 15 Class B
EN61000-3-2
EN61000-3-3
Class C
UL Conditions of Acceptability
40 45 50 55 60 65 70 75 80 85 90
See website for additional information
Case Hotspot Temperature (°C)
Note:
Life calculations are based on reliability with confidence using
a 90% confidence level and <5% failure rate. At a confidence
level of 90% it is expected that <5% of the parts will fail at
the rated life provided. (Failure is defined as a driver drifting
outside specification, rather than fail to operate)
Note:
Disconnect power to LED driver for at least 30 seconds before connecting or disconnecting Driver output and LED Engine. This prevents potential arcing transients
that can damage the Engine and Driver. See Hot Plugging in our Driver Application Guide for more information.
Thomas Research Products • 1215 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
相关型号：
©2020 ICPDF网 联系我们和版权申明