BPH05-08-33 [ETC]
BIAS 1/2 Watt Power Supply BPH 0.5 Series;型号: | BPH05-08-33 |
厂家: | ETC |
描述: | BIAS 1/2 Watt Power Supply BPH 0.5 Series |
文件: | 总3页 (文件大小:816K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
BIAS 1/2 Waꢀ Power Supply
BPH 0.5 Series Data Sheet
Single (Vo) or Dual (Vo & Vr) output
BPH 0.5-08-00, -08-33, -08-50
BPH 0.5-14-00, -14-33, -14-50
Actual Size
The BPH is a revoluꢁonary, micro-sized, drop-in switching power supply
module. It contains patented technology with unique features that
provide soluꢁons for a wide range of applicaꢁons, including low power
wireless and many other intelligent control devices. The patented SMPS
topology is totally different from any other:
Features
•
•
Complies with CSA CAN3-C235-83
NO DE-RATING across enꢁre temperature
range (-30 to +70°C )
•
•
•
•
•
•
•
Universal Input (100-375 VAC, 50/60Hz)
Small Size—0.55in3 [9.0cm3]
It's Quiet: Switching is synchronized and occurs only 10% of the ꢁme, so
there is very liꢂle EMI / EMC interference with other circuits. This means no
extra ꢀltering or shielding is needed, helping to achieve longer transmission
range with more reliable data communicaꢁon in low power wireless
applicaꢁons.
Low no-load input power <30mW
Constant power mode, not current limit
3000 VAC Isolaꢁon
EN 55022, Class B; FCC Part 15, Class B
Meets UL/CSA and EN Product Safety (ITE)
It's Powerful: No power de-raꢁng across the full wide temperature range.
No current limit design margin needed when selecꢁng a module. Charge
large super caps faster than any regular SMPS with twice the power raꢁng.
Bias Power AC/DC power supplies are available with two
different types of outputs to fit your applicaꢁons…
It's Green: High efficiency with ultra low standby power and very liꢂle self
generated heat make it ideal for intelligent devices such as smart-sensors,
smart-meters, smart-lighꢁng, smart-grid, M2M or IoT , and any other control
applicaꢁons.
The characterisꢁcs of the main (Vo) and auxiliary (Vr) outputs
are different and each has applicaꢁon-speciꢀc beneꢀts which
can provide high value to the system designer:
Vo is a voltage-regulated output which has a constant power
mode instead of a convenꢁonal current limit. This output is
best suited as a source for isolated DC uꢁlity power, which may
be used directly or post-regulated with either a linear regulator
or a DC/DC converter. Vo is self protecꢁng, cannot be over-
loaded and can be shorted indefinitely. So unlike design-your-
own, or parꢁally complete modules where signiꢀcant design
margin is required to stay far away from current limit, there is
no need to oversize a Bias Power supply. The graceful transi-
ꢁon from voltage regulaꢁon to constant power along with the
wide range of product raꢁngs allows the designer to select a
supply ꢁghtly matched to the design load.
Operaꢁng Specificaꢁons
(@120VAC / 60 Hz / 25°C unless otherwise specified)
Electrical
Input Voltage Range
100 - 375 VAC (50/60Hz)
Input Surge Withstand
420V, < 30 sec
0.5 W (60Hz)
0.43 W (50Hz)
Output Power (Pmax)
Efficiency
70% nom.
Output Vo (Peak @100% load)
Line / Load Regulaꢁon Vo (Peak)
Temperature Regulaꢁon Vo (Peak)
Ripple Vo (@120 Hz)
(@ 100 kHz)
+/- 10% across operaꢁonal voltage range
+/- 1% Po < Pmax
+/- 2% Po < Pmax
1.00 V p:p
0.25 V p:p
For Vo = 8V, Ir out 53mA max, Io+Ir ≤ 63mA*
For Vo = 14V, Ir out 23mA max, Io+Ir ≤ 36mA*
For Vo = 8V, Ir out 63mA max, Io+Ir ≤ 63mA*
For Vo = 14V, Ir out 28mA max, Io+Ir ≤ 36mA*
Vr is also a voltage-regulated output and is thermally protected
from overload. It has very low output ripple capable of driving
elements which require a low-noise, ꢁghtly-regulated supply.
In addiꢁon, Vr is supplied internally by Vo. This means that any
capacitance added to Vo can increase the hold-up ꢁme of Vr as
well.
Output Vr, 3.3 volt (+/- 5%)
Output Vr, 5.0 volt (+/- 5%)
*Note: maximum currents speciꢀed for constant voltage range
only. See V-I curve on page 2 for Vo in constant power range.
No-load Consumpꢁon
Isolaꢁon
30 mW typical @ Vin=120 VAC
3000 VAC (meets UL / CSA & EN Product Safety)
< 10 uA
Earth Leakage @ 120 VAC
Short Circuit Protecꢁon
Reliability @ 25° C, MIL HDBK-217F
Thermal
Conꢁnuous, Pin ≤ 0.6 w @ Vin = 120 VAC
> 500 Khr MTBF
Operaꢁng Temperature
Operaꢁng Relaꢁve Humidity
Storage Temperature
Mechanical
-30 to +70° C
0 – 95%, non-condensing
-40 to +105° C
Package Size
(L x W x H)
1.10 x 0.92 x 0.55 inches
[27.94 x 23.24 x 13.97 mm]
Safety
UL/EN 60950-1 2nd Ediꢁon (CB Report Available)
Not intended for computer room use.
EN 55022, Class B, FCC Part 15, Class B
Safety Compliance
EMI Emissions
BPH 0.5 Series Data Sheet, Page 1 of 2
Revised 2/12/2014
www.biaspower.com
Speciꢀcaꢁons subject to change
BIAS 1/2 Waꢀ Power Supply
BPH 0.5 Series Data Sheet
Single (Vo) or Dual (Vo & Vr) output
BPH 0.5-08-00, -08-33, -08-50
BPH 0.5-14-00, -14-33, -14-50
PIN
L1
DESCRIPTION
Input High
Input Low
Part Number Designation
Part Number
Output Configuration
Vo
Vr
L2
BPH 0.5-08-00
BPH 0.5-14-00
BPH 0.5-08-33
BPH 0.5-08-50
BPH 0.5-14-33
BPH 0.5-14-50
Single output
Single output
Dual Output
Dual Output
Dual Output
Dual Output
8 VDC
14 VDC
8 VDC
8 VDC
14 VDC
14 VDC
N/A
N/A
N/C
Vo
No Connection
Output
3.3 VDC
5 VDC
3.3 VDC
5 VDC
GND
Vr
Ground
Vr Output
N/C
No Connection
NOTES
1. Pins 0.031” [0.787 mm] round
Recommended Land Pattern, top view
2. Pins extend 0.125” [3.175 mm]
below stand-offs
Recommended Isolation,
Bottom View
V-I Curve (For Vo in Constant Power Range)
V-I, typical
10
8
Constant Power Region
6
4
2
0
0
50
100
Io, mA
150
200
250
BPH 0.5 Series Data Sheet, Page 2 of 2
Revised 2/12/2014
www.biaspower.com
Speciꢀcaꢁons subject to change
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
BIAS Power:
BPH-0.5-08-00 BPH-0.5-08-50 BPH-0.5-14-00 BPH-0.5-14-50
相关型号:
BPH2B10A00
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Press Fit Terminal, Locking, Gray Insulator,
AMPHENOL
BPH2B10A00GS
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Press Fit Terminal, Locking, Gray Insulator
AMPHENOL
BPH2B10A00GSLF
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Press Fit Terminal, Locking, Gray Insulator, LEAD FREE
AMPHENOL
BPH2B10A00LF
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Press Fit Terminal, Locking, Gray Insulator, LEAD FREE
AMPHENOL
BPH2B10A00N9
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Press Fit Terminal, Locking, Gray Insulator,
AMPHENOL
BPH2B10A00N9LF
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Press Fit Terminal, Locking, Gray Insulator, LEAD FREE
AMPHENOL
©2020 ICPDF网 联系我们和版权申明