BU8877 [ETC]

Call Progress Tone Decoder for Telephone; 呼叫进程音解码器的电话
BU8877
型号: BU8877
厂家: ETC    ETC
描述:

Call Progress Tone Decoder for Telephone
呼叫进程音解码器的电话

解码器 电信集成电路 光电二极管 电话
文件: 总3页 (文件大小:104K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
99W121A  
Call Progress Tone Decoder for Telephone  
BU8877/F  
Description  
Dimension(Units:mm)  
BU8877  
The BU8877 and BU8877F are ICs that  
detect dial tones from a call progress signal  
used in the telephone lines. The ICs detect  
dual signals 350Hz(from 345 to 355Hz)and  
440Hz(from 435 to 445Hz).  
Features  
1) No malfunction by voice signal  
2) Dual tone detection (350Hz and 440Hz)  
3) Wide dynamic range  
DIP8  
4) 3.58MHz crystal resonator  
BU8877F  
Applications  
Telephone, Codeless telephone and Facsimile for the U.S.  
SOP16  
Absolute Maximum Ratings (Ta=25˚C)  
Parameter  
Symbol  
VCC  
Limits  
7
Unit  
V
Power supply voltage  
*1  
*2  
800  
DIP8  
Power  
dissipation  
Pd  
mW  
SOP16  
300  
Operating temperature range  
Storage temperature range  
Topr  
Tstg  
-30 ~ +80  
˚C  
˚C  
-55 ~ +125  
*1 Derating:8.0mW/˚C for operation above Ta=25˚C  
*2 Derating:3.0mW/˚C for operation above Ta=25˚C  
Recommended Operating Conditions (Ta=25˚C)  
Symbol  
VDD  
Min.  
2.85  
Typ.  
-
Max.  
5.25  
Unit  
V
Parameter  
Power supply voltage  
December, 1999  
Electrical characteristics (Unless otherwise noted, Ta=25˚C, VDD= 5.0V, Xtal frequency=3.58MHz)  
Parameter  
Symbol  
IDD2-1  
Min.  
-
Typ.  
3.7  
-
Max.  
5.0  
-
Unit  
mA  
Conditions  
Supply current operation 2-1  
Minimum input signal level  
Maximum input signal level  
Must not detect signal level  
ENABLE="H"(VDD=5.0V)  
Input frequency:  
Must detect frequency range  
VRECL, VRECH are proportional  
to VDD.  
VRECL  
-38  
-
dBm  
dBm  
dBm  
Hz  
VRECH  
-
2
VREJ  
-50  
345  
435  
-
-
-
350Hz fV350  
440Hz fV440  
Zin  
350  
440  
100  
-
355  
445  
-
Input signal level: 0dBm  
Must detect frequency range  
Input Impedance  
Hz  
kW  
Input frequency: 100Hz~2000Hz  
Call progress tone response time  
Call pogress tone de-response time  
t
RES  
28  
28  
35  
56  
56  
65  
ms  
ms  
%
t
DRES  
-
*
WDU  
Detect duty ratio  
50  
*Detect Duty Ratio which input signal (350Hz+440Hz) burst at 5Hz (Duty Ratio=50%)  
Block Diagram  
VDD  
VSS  
VDD  
VSS  
ENABLE  
ENABLE  
BPF  
(350Hz)  
Comparator  
Timer  
DETECT  
VREF  
INPUT  
AGC  
AAF  
BPF  
(440Hz)  
Comparator  
XIN  
CLOCK  
GENERATOR  
OSC  
VREF  
CLOCK  
XOUT  
BU8877/F  
Appendix  
Notes  
No technical content pages of this document may be reproduced in any form or transmitted by any  
means without prior permission of ROHM CO.,LTD.  
The contents described herein are subject to change without notice. The specifications for the  
product described in this document are for reference only. Upon actual use, therefore, please request  
that specifications to be separately delivered.  
Application circuit diagrams and circuit constants contained herein are shown as examples of standard  
use and operation. Please pay careful attention to the peripheral conditions when designing circuits  
and deciding upon circuit constants in the set.  
Any data, including, but not limited to application circuit diagrams information, described herein  
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM  
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any  
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of  
whatsoever nature in the event of any such infringement, or arising from or connected with or related  
to the use of such devices.  
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or  
otherwise dispose of the same, no express or implied right or license to practice or commercially  
exploit any intellectual property rights or other proprietary rights owned or controlled by  
ROHM CO., LTD. is granted to any such buyer.  
Products listed in this document use silicon as a basic material.  
Products listed in this document are no antiradiation design.  
The products listed in this document are designed to be used with ordinary electronic equipment or devices  
(such as audio visual equipment, office-automation equipment, communications devices, electrical  
appliances and electronic toys).  
Should you intend to use these products with equipment or devices which require an extremely high level of  
reliability and the malfunction of with would directly endanger human life (such as medical instruments,  
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other  
safety devices), please be sure to consult with our sales representative in advance.  
About Export Control Order in Japan  
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control  
Order in Japan.  
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)  
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.  
Appendix1-Rev1.0  

相关型号:

BU8877F

Call Progress Tone Decoder for Telephone
ETC

BU8877F-E2

Telephone Circuit, PDSO16,
ROHM

BU8899GU

Sound Generator for cellular phone
ROHM

BU8903GU

Audio music player for cellular phone
ROHM

BU8903GU-E2

Consumer Circuit, PBGA60,
ROHM

BU8907GU

Baseband Circuit, PBGA48, VCSP-48
ROHM

BU8907GU-E2

Consumer Circuit, PBGA48
ROHM

BU8920GU

Silicon monolithic integrated circuit
ROHM

BU8920GU-E2

PCM Codec, A/MU-Law, 1-Func, PBGA23,
ROHM

BU8925MUV

Silicon monolithic integrated circuit
ROHM

BU8925MUV-E2

PCM Codec, A/MU-Law, 1-Func, PQCC32,
ROHM

BU8992

Telecommunication IC
ETC