CHM3DCIU [ETC]
MODULAR FUSE HOLDER 1000V 3P;型号: | CHM3DCIU |
厂家: | ETC |
描述: | MODULAR FUSE HOLDER 1000V 3P |
文件: | 总9页 (文件大小:2496K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
BUSSMANN
Effective July 2020
Supersedes June 2020
Technical Data 10430
SERIES
CH Modular, IP20 finger-safe DIN-Rail holders for
Class CC, supplemental and PV fuses
Specifications:
2011/65/EU
Ratings
•
Volts
•
•
•
600 V (or less) UL
690 V (or less) IEC
1000 Vdc (or less) photovoltaic (PV)
•
•
Amps
•
30 A UL
32 A IEC
•
Short-Circuit Current Rating (SCCR)
•
33 kA photovoltaic
•
200 kA RMS Sym. (CHCC, CHM*)
* CHM SCCR is fuse interrupting rating dependent.
Agency information
•
CHCC - Class CC version: UL Listed, File
E14853, Guide IZLT
Catalog symbol:
•
CHM - Supplemental fuse version: UL
•
CHCC_ (Class CC)
Recognized, File E14853, Guide IZLT2
CHM_ (UL® supplemental/IEC 10x38)
•
•
CHPV - PV version: UL Listed, File E348242,
Guide IZMR
•
CHPV_ (13/32 x 1-1/2 and 10x38 photovoltaic)
CSA® File 47235, CHPV and CHM -
•
Class 6225-30, CHCC - Class 6225-01
Description:
•
IEC 60269-2 (CHM, CHPV)
•
CCC
RoHS compliant
Eaton’s Bussmann™ series CH DIN-Rail fuse
holders are for UL Class CC and supplemental
fuses, and IEC 10x38 fuses. They are available
with and without indication in 1-, 2- and 3-pole
IP20 finger-safe versions. A variety of accessories
extends their application flexibility and they may
be ganged together to meet specific application
requirements.
•
Mounting
•
35 mm DIN-Rail
Wire range (see conductor table on page 3 for
details)
•
75°C and 90°C Cu
#18 to #4 (0.8 mm2 to 21.1 mm2)
For other Bussmann series CH fuse holders,
please see the following data sheets.
•
•
•
•
Solid
Stranded
Fine stranded
Fuse class
Fuse size
Data sheet No.
2144
Class J
30 and 60 A
8 x 32 mm
14 x 51 mm
22 x 58 mm
720147
Terminals
IEC
10080
•
Single or dual conductors
Comb busbar
10015
•
•
Terminal screws
•
Standard phil-slot
•
Optional hex head (order by adding
“-H” suffix to the catalog number, e.g.,
CHM1DU-H)
Flammability
•
UL 94V0, self-extinguishing
Storage and operating temperature
•
-4°F (-20°C) to 194°F (90°C) indicating
•
-4°F (-20°C) to 248°F (120°C) non-indicating
Technical Data 10430
Effective July 2020
CH modular, IP20 finger-safe DIN-Rail holders for
Class CC, supplemental and PV fuses
Features and benefits:
Dimensions - mm (in):
61.83
•
High SCCR rated, UL Listed Class CC holder with optional open
[ 2.434 ]
fuse indication for 600 Vac/dc and 48 V dc (see catalog number
table for details)
18.59
[ 0.732 ]
•
Enhanced safety with IP20 finger-safe construction
•
UL Recognized midget and IEC 10x38 holders with factory
assembled neutral pole option
•
Agency ratings up to 1000 Vdc for use with PV fuses
•
Available remote PLC fuse indication module
•
Wiring flexibility with terminals rated for use with 75°C or 90°C
solid, stranded and fine stranded wire, and spade terminals and
comb busbars. (Use any higher temperature insulations at the
90°C ampacity.)
42.58
[ 1.676 ]
•
Complete range of UL Listed and high SCCR rated one- and three-
phase finger-safe comb busbars and power feed lugs
52.83
[ 2.080 ]
83.19
•
Optional hex head terminal screw makes it easier to achieve
necessary torque values
[ 3.275 ]
70
[ 2.756 ]
Features:
52.5
IP20 finger-safe
construction
[ 2.067 ]
Fuse access door
35
Optional open
accommodates 4 mm
[ 1.378 ]
fuse indicator
lockout/tagout device
17.5
Captive phil-slot
[ 0.689 ]
or optional hex
head terminal
screw
Fork lug
terminal
73.88
[ 2.909 ]
Toolless
ganging for
multiple poles
Dual conductor
rated box lug
clamp
Toolless 35 mm
DIN-Rail mounting
Wire strip
gauge
9
[ 0.354 ]
7.0
[ 0.276 ]
Gang multiple poles to meet application requirements using kit catalog number
JV-L (gangs up to four poles).
2
Eaton.com/bussmannseries
CH modular, IP20 finger-safe DIN-Rail holders for
Class CC, supplemental and PV fuses
Technical Data 10430
Effective July 2020
UL midget and IEC 10x38 CHM holder catalog numbers
Catalog number†
Volts and amps
Recommended
Bussmann
With
Without
Agency
marks
indication*
indication
CHM1DU
CHM2DU
CHM3DU
CHM4DU
CHM1DNU
CHM3DNU
UL IEC
Poles
SCCR
series fuses
CHM1DIU
CHM2DIU
CHM3DIU
CHM4DIU
CHM1DNIU
CHM3DNIU
1
UR, CSA,
IEC 60269-2,
CCC
2
3
BAF, BAN,
600 V/30 A 690 V/32 A
4
200 kA** FNM, FNQ,
RMS
Sym.††
FWA, FWC,
1 + neutral
3 + neutral
KLM, KTK, AGU,
C10G_, C10M_
IEC 60269-2
UR, CSA,
CHM1DI-48U
—
48 Vdc/30 A 48 Vdc/32 A IEC 60269-2,
CCC
1
—
CHM1DNXU
CHM1DCU
CHM2DCU
CHM3DCU
—
690V/32 A IEC 60269-2
N/A
N/A
CHM1DCIU
CHM2DCIU
CHM3DCIU
1
2
3
600/690V
BAF, BAN,
FNM, FNQ,
FWA, FWC,
600 Vac,
1000 Vdc, 690 V, 32 A
30 A
200 kA** KLM, KTK,
RMS Sym., AGU, C10G_,
33 kA DC†† C10M_,
UR, CSA,
IEC 60269-2
CHM4DCIU
CHM4DCU
4
1000Vdc
PV-(amp)A10F,
PV10M-(amp)
†
Available with optional hex head terminal screws. To order, add “-H” suffix to the desired catalog number.
†† SCCR is limited to the interrupting rating of the installed fuse or 200 kA, which ever is less.
All models require 90 V minimum for illumination, except CHM1DI-48U that requires 15 V minimum.
*
** SCCR is limited to the interrupting rating of the installed fuse or 200 kA, which ever is less.
UL Class CC CHCC holder catalog numbers
Catalog number†
Recommended
Bussmann series
fuses
With
indication*
Without
indication
Agency
marks
Volts / amps
600 V/30 A
Poles
SCCR
200 kA RMS Sym.
33 kA DC
CHCC1DIU
CHCC2DIU
CHCC3DIU
CHCC1DI-48U
CHCC1DU
CHCC2DU
CHCC3DU
—
1
2
3
1
LP-CC,
FNQ-R,
KTK-R
UL, CSA, CCC
48 Vdc/30 A
†
Available with optional hex head terminal screws. To order, add “-H” suffix to the desired catalog number.
* All models require 90 V minimum for illumination, except CHCC1DI-48U that requires 15 V minimum.
UL and IEC photovoltaic CHPV holder catalog numbers
Catalog number†
With
indication
Without
indication
Agency
marks
Recommended
Bussmann series fuses
Volts / amps
Poles
SCCR
CHPV1IU
CHPV2IU
CHPV1U
CHPV2U
UL, CSA, , UL
4248-19, IEC
60269-1, CCC
1
PV-(amp)A10F,
PV10M-(amp)
1000 Vdc/30 A
33 kA DC
2
†
Available with optional hex head terminal screws. To order, add “-H” suffix to the desired catalog number.
* All models require 90 V minimum for illumination.
Conductor information
AWG wire range
4-12
Wire type
Wire rating
Terminal torque N•m (lb-in)*
Solid/Stranded/compact/Class K
Solid/Stranded/Class K
Stranded
3.4 (30)
2.3 (20)
3.4 (30)
2.8 (25)
3.4 (30)
2.8 (25)
14-18
(2) 10-12
10-18 (includes up to 6mm2 in metric sizing) Solid/Stranded/Ferrule
75°C or 90°C Cu
(2) 14
Solid/Stranded
(2) 16-18
Fork terminals
N/A
3.4 (30)
Comb busbar
* Use a phil-slot bit designed for high torque, or specify hex head terminal screw option.
Eaton.com/bussmannseries
3
Technical Data 10430
Effective July 2020
CH modular, IP20 finger-safe DIN-Rail holders for
Class CC, supplemental and PV fuses
Accessories:
Bussmann series CH modular fuse holders can be applied using a
variety of accessories that facilitate or simplify installation.
Power feed terminals
1- and 3-phase comb busbars
CH fuse holders
35 mm DIN-Rails
•
Constructed of high strength stainless steel
Contact safety covers
•
Sold in 1 meter lengths
•
Available in high- or low-profile versions
Catalog numbers
DRL35MMLO
DRL35MMHI
Profile
Low
Height
7.5 mm
15 mm
High
Comb busbars
•
Easily distribute power in single-or three-phase systems
Single-phase comb busbars
•
Flexible cut-to-length busbars do not compromise the finger-safe
protection (requires using endcaps)
•
•
•
•
100 kA SCCR when protected by a max 200 A Class J fuse
1000 Vdc and 100 A
600 Vac/dc and 100 A
Single-phase busbars rated to
Three-phase busbars rated to
Power feed terminals for single-and three-phase systems
Specifications:
Available in 3, 6, 9, 12,15 and 57 pin constructions.
Agency information
•
UL 508, File E195399
Pitch
Three-phase comb busbars
•
17.8 mm
Ratings
•
Volts
•
600 Vac/dc max. (three-phase)
•
1000 Vdc/600 Vac max. (single-phase)
•
•
100 A max.
Amps
SCCR
•
10 kA (default)
•
100 kA (with upstream Class J max 200 A fuses)
Available in 6, 9, 12, 15 and 57 pin constructions.
4
Eaton.com/bussmannseries
CH modular, IP20 finger-safe DIN-Rail holders for
Class CC, supplemental and PV fuses
Technical Data 10430
Effective July 2020
Comb busbar dimensions - mm:
Single-phase
A
17.8
5.5
2.5
15.6
5.0
15.0
B
Single- and three-phase dimensions - mm
Poles
3
A
B
C
35.6
52
—
6
89.0
106
160
208
272
1012
104
159
214
266
1009
9
142.4
195.8
249.2
996.8
Three-phase
12
15
57
21.6
All 15-pole or fewer comb busbars come with
endcaps installed. If a comb busbar will be cut-
to-length, order additional endcaps to maintain
electrical protection.
24.9
36.5
13.5
End caps are sold in carton quantities of 50.
Order ECAP1P for single-phase and ECAPMP
for three phase.
6.0
2.0
17.8
A
C
Comb busbar catalog numbers:
Catalog number
BB1P100M3
BB1P100M6
BB1P100M9
BB1P100M12
BB1P100M15
BB1P100M57
BB3P100M6
BB3P100M9
BB3P100M12
BB3P100M15
BB3P100M57
Phase
Voltage
Amps
Number of pins Endcaps
3
6
With endcaps assembled. If cut to
length, order additional endcaps
separately.
9
Single-phase
1000 Vdc
100 A
12
15
57 pin cuttable
Without endcaps (order separately)
6
With endcaps assembled. If cut to
length, order additional endcaps
separately.
9
Three-phase
600 V
100 A
12
15
57 pin cuttable
Without endcaps (order separately)
Eaton.com/bussmannseries
5
Technical Data 10430
Effective July 2020
CH modular, IP20 finger-safe DIN-Rail holders for
Class CC, supplemental and PV fuses
Power feed terminals:
PWR1PLP
28.5
16.1
21.0
36.1
Single-phase, low profile power feed terminal
12.4
11.0
Ratings
•
Volts 1000 Vac/dc
3.0
6.0
•
Amps 115 A
•
Wire range 1/0-10 AWG Cu, max torque 50 lb-in (5.6 N•m)
•
Wire temp. rating 60°C*
PWR35MM
35 mm2 three-phase power feed terminal
for three-phase busbars
Ratings
•
Volts 1000 Vac/dc
•
Amps 115 A
•
Wire range 1/0-10 AWG Cu, max torque 50 lb-in (5.6 N•m)
•
Wire temp. rating 60°C*
PWR50MM
12.3
4.0
50 mm2 direct feed power terminal
40.0
17.75
17.75
Ratings
•
Volts 1000 Vac/dc
•
Amps 115 A
29.8
•
Wire range 1-14 AWG Cu, max torque 35 lb-in (3.9 N•m)
28.8
•
Wire temp. rating 75°C*
17.75
* Higher temperature rated wire may be used with appropriate derating.
6
Eaton.com/bussmannseries
CH modular, IP20 finger-safe DIN-Rail holders for
Class CC, supplemental and PV fuses
Technical Data 10430
Effective July 2020
Comb busbar safety covers and end caps:
FSCVR
71.2
17.8
85.2
4.6
R 0.5
14.0
3.8
Spare comb busbar pin safety protection covers (used to cover
exposed pins on comb busbars). Sold in quantity of ten strips of five
covers each. (FSCVR comes with five covers on a strip. Minimum
order is 10 strips or 50 safety covers total.)
24.2
5.7
23.8
1.0
1.7
ECAP1P
14.0
End cap for single-phase comb busbars. Sold in quantity of fifty.
1.1
2.1
4.9
8.5
ECAPMP
24.0
21.6
18.6
9.5
End cap for three-phase comb busbars. Sold in quantity of fifty.
Accessory catalog numbers
Catalog no.
PWR1PLP
PWR35MM
PWR50MM
ECAP1P
Description
Carton quantity
Single-phase low-profile power feed terminal (115 A, 1000 Vac/dc)
35 mm2 power feed terminal for three-phase busbar (115 A, 1000 Vac/dc)
50 mm2 direct power feed terminal (1000 Vac/dc)
Single-phase busbar endcap
10
10
10
50
50
ECAPMP
FSCVR
Three-phase comb busbar end cap
Spare comb busbar pin safety protection covers
10 strips of five covers each, total 50 individual covers
Eaton.com/bussmannseries
7
Technical Data 10430
Effective July 2020
CH modular, IP20 finger-safe DIN-Rail holders for
Class CC, supplemental and PV fuses
Wiring
PLC fuse monitor
•
For power, signal and ground connections use shielded twisted
pair 22-24 AWG (0.34-0.25 mm2) 300 V rated wire.
Minimum circuit voltage
•
Minimum circuit voltage required across the CH holder is 100 Vac
for the remote indication device to operate
Installation
•
Mounts on the left side of the fuse holder and mechanically
interlocks with the fuse holder switch handle with hardware
provided
Degree of protection IP20 finger-safe
Storage and operating temperature
•
-4°F (-20°C) to +167°F (+75°C)
The Bussmann series resettable PLC fuse monitor permits easy
integration with a Programmable Logic Controller (PLC) or other
monitoring and control equipment. Signals up to three-phases.
Includes 0.11” (2.8 mm) quick-connects for power, signal and ground
connections.
PLC programming
•
The CH-PLC2 signal line is designed to provide a digital input to a
PLC I/O card
Ratings
•
Programmable Logic Control program must be written to properly
interpret the input signal to the PLC
•
Signal output to PLC*
•
+24 Vdc, 10 mA max
•
The PLC program should check for consecutive high signals before
taking action on a critical process
•
Output signals
•
•
•
Digital 0 Vdc (low), 24 Vdc max (high)
0 Vdc Low – fuse is good
To order
•
Specify catalog number CH-PLC2 (one unit)
24 Vdc High – fuse has opened
* When the fuse opens, the output signal is sent
high and will remain high until the unit is reset.
PLC wiring schematic
PLC power supply
CH-PLC2
Agency information
Twisted, shielded pair
•
UL 508 Listed, Guide NKCR, File E170168
+24Vdc
+24Vdc
•
cULus, Guide NKCR7, File E170168 to Canadian Standard 22.2,
No. 14-13
0Vdc/Gnd
0Vdc/Gnd
Ground shield on
one side only
Signal output
10mA max.
Emissions and immunity testing
The CH-PLC2 needs to be
powered by the same
+24Vdc and ground
(0Vdc/Gnd return)
terminals that are feeding
the PLC input card.
If it is not, it may signal
improperly.
•
IEC 60947-1: Voltage Switchgear and Control Gear
•
IEC 61000-6-2: Electromagnetic Compatibility (EMC)
•
IEC 61000-4-2: Electrostatic Discharge Immunity - Test at level
3 (6 kV-Contact Discharge) and level 2 (4 kV-Air Discharge)
•
IEC 61000-4-3: Electromagnetic Compatibility - Radiated, Radio-
frequency, Electromagnetic Field Immunity test at level x (20
V/m)
If feeding multiple
CH-PLC2s from
different power supplies,
there must be multiple
input cards being powered
by those same power
supplies as well.
•
•
IEC 61000-4-4: Electromagnetic Compatibility - Testing and
Measurement Techniques at level 3 ( 2kV - Power Port and
1 kV - I/O Ports)
+24Vdc
0Vdc/Gnd
PLC
input
card
IEC 61000-4-5: Electromagnetic Compatibility - Surge Immunity
test at level 4 ( 4 kV)
•
IEC 61000-4-6: Immunity to Conducted Disturbances at level 3 (10 V)
UL 94V0
Flammability rating
Local indication
•
Two distinct LEDs indicate unit power (green) and open fuse
(red). Open fuse LED is resettable upon fuse replacement and the
actuating the reset switch
8
Eaton.com/bussmannseries
Technical Data 10430
Effective July 2020
CH modular, IP20 finger-safe DIN-Rail holders for
Class CC, supplemental and PV fuses
The only controlled copy of this data sheet is the electronic read-only version located on the Eaton network drive. All other copies of this document are
by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the
end user with design applications. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit
distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once
a product has been selected, it should be tested by the user in all possible applications.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
Eaton.com
For Eaton’s Bussmann series
product information,
call 1-855-287-7626 or visit:
Eaton.com/bussmannseries
Bussmann Division
114 Old State Road
Ellisville, MO 63021
United States
Eaton and Bussmann are valuable trademarks
of Eaton in the US and other countries. You
are not permitted to use the Eaton trademarks
without prior written consent of Eaton.
Eaton.com/bussmannseries
Follow us on social media to get the
latest product and support information.
© 2020 Eaton
CSA is a registered trademark of the Canadian
Standards Group.
UL is a registered trademark of the
Underwriters Laboratories, Inc.
All Rights Reserved
Publication No. 10430
July 2020
相关型号:
©2020 ICPDF网 联系我们和版权申明