CHT-LDOS-090 [ETC]
High-Temperature, 2.5V; 3.3V; 5V; 5.5V; 9V; 10V; 12V; 13V or 15V, 1A, Low-Dropout SOI-CMOS Voltage Regulator for symmetrical voltage applications.; 高温度,2.5V ; 3.3V ; 5V ; 5.5V ; 9V ; 10V ; 12V ; 13V或15V , 1A ,低压差SOI -CMOS电压稳压器的对称电压应用。型号: | CHT-LDOS-090 |
厂家: | ETC |
描述: | High-Temperature, 2.5V; 3.3V; 5V; 5.5V; 9V; 10V; 12V; 13V or 15V, 1A, Low-Dropout SOI-CMOS Voltage Regulator for symmetrical voltage applications. |
文件: | 总5页 (文件大小:298K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CISSOID The SOI design Specialists
CHT-LDOS
Preliminary datasheet
Version 1.0 (05/2006)
High-Temperature,
2.5V; 3.3V; 5V; 5.5V; 9V; 10V; 12V; 13V or 15V,
1A, Low-Dropout SOI-CMOS Voltage Regulator
for symmetrical voltage applications.
General Description
Features
The CHT-LDOS is a 1A, low-dropout linear
voltage regulator compatible with high-
•
•
•
•
•
1V to 20V dropout Voltage @400mA(1)
2V to 20V dropout Voltage @1A(1)
Max 1A output current @ 225°C
60dB input ripple rejection (0-100Hz)
Cload from 100nF to 1000µF, large
ESR range
temperature
environments.
Typical
operation temperature range extends from
-30°C to 225°C.
The circuit is stable throughout the whole
temperature range and under a large
choice of capacitive loads.
•
Available on die or in custom package
on demand. (3-pins compatible)
Stand-by mode available. (4-pins)
Tungsten interconnects for long-term
reliability
The minimum dropout voltage (Vin-Vout) is
2V with a 1A load current at 225°C and 1V
for load currents lower than 400mA. The
dropout voltage can span from 1 Volts to
20 Volts(1).
•
•
The circuit is a one-die solution.
•
•
The start-up is operative over the
whole temperature range
CHT-LDOS is available in die and
packages (currently TO-3 and TO-254) on
demand.
Latch-up free
Related documents:
•
AN-06016:
CISSOID regulator depending on your
application”
AN-06002: “Voltage regulator short-
circuit protection and associated
potential startup problem”.
“Selecting
correct
Available voltages:
•
•
•
•
•
•
•
•
•
CHT-LDOS-025:
CHT-LDOS-033:
CHT-LDOS-050:
CHT-LDOS-055 :
CHT-LDOS-090 :
CHT-LDOS-100 :
CHT-LDOS-120:
CHT-LDOS-130:
CHT-LDOS-150:
2.5V
3.3V
5.0V
5.5V
9.0V
10.0V
12.0V
13.0V
15.0V
•
Applications
Power supplies for high-temperature
electronic systems used in Well logging,
Automotive, Aeronautics or Aerospace
applications.
VNOM+2V
Cin
VNOM
Typical application
Vin
Vout
CHT-LDOS
Cout
GND
CHT-LDOS - Preliminary datasheet
Absolute Maximum Ratings
Operating Conditions
Supply Voltage Vin
-0.3V…40V
315°C
Supply Voltage
1V to 20V dropout(1)
Junction Temperature(2) (Tj)
Power dissipation (3)
Junction temperature
-30°C to 225°C
Power Dissipation (3)
ESD Rating (expected)
Human Body Model
>1kV
Electrical Characteristics
Following table is relative to the 5V mode (CHT-LDOS-050).
For other nominal voltage, see notes under this table.
Vin = Vout + 2V
Parameter
Output voltage
accuracy
Condition
IL=10mA
-30°C <Tj <225°C
Min
Typ
Max
Units note
%
-2
0
2
Output voltage T°
drift
Output voltage line
regulation
IL=10mA
0
40
80
1
ppm
(4)
(5)
25°C <Tj <225°C
dropout=2V to 15V
IL=60mA, -30°C <Tj <225°C
-1
mV/V
Output voltage load
regulation
IL=10mA to 1A @2V dropout
-30°C <Tj <225°C
0.04
0.1
V/A
(6)
(i.e. Rout
)
(Vin-Vout)
(droupout)
Quiescent Ground
Pin current
1
2
V
V
mA
IL≤400mA, -30°C <Tj <225°C
IL=1A, -30°C <Tj <225°C
0 < IL <1A
-30°C
225°C
(7)
(8)
3.2
2.9
Power supply
rejection ratio
f=0Hz ..100Hz
Iload=100mA
tbd
dB
Foldback current
Short-circuit current
Output noise
2.5
300
tbd
A
mA
µVRMS
20°C <Tj <225°C
10Hz-10kHz
IL=100mA,
-30°C <Tj
<225°C
Notes:
(1) Vin max=30V
(2) Above 225°C (Tj), a minimum load current of few mA could be required.
(3) Max Power dissipation depends on packaging. CHT-LDOS in TO-3 or TO-254 packages presents a “junction-to-
case” thermal resistance of maximum 5°C/W (Rth).
(4) ppm are defined as [d(Vout)/d(T)]/Vout. For 5V mode, 40ppm corresponds to 200µV/°C.
(5) Defining “x” as the nominal voltage, the line regulation is better than x/5 mV/V.
(6) This includes the packaging parasitic resistor.
(7) Defining “x” as the nominal voltage, the typical quiescent current at 2V dropout can be approximated as
2.8+x/13 mA @ -30°C and 2.5+x/13 mA at 225°C.
(8) Defining “x” as the nominal voltage, the minimum power supply rejection ratio is …(tbd)….
Version 1.0 (17/05/2006)
2
http://www.cissoid.com
CHT-LDOS - Preliminary datasheet
Output Load, recommended specifications
CHT-LDOS
Resistances in series with capacitors represent the internal ESR of these capacitors.
For large capacitors:
CB= 0 to 1000µF
RB= 0.2 to ∞ Ω
For medium capacitors:
CM= 0 to 6µF
For small Capacitors:
CS= 100n to 220nF
RS=10m to 50m Ω
RM=0.1 to 1 Ω
Start-up conditions
The start-up is operative over the whole temperature range.
Refer to our application note for more details when using symmetrical voltages.
•
•
AN-06016: “Selecting correct CISSOID regulator depending on your application”
AN-06002: “Voltage regulator short-circuit protection and associated potential startup
problem”.
Version 1.0 (17/05/2006)
3
http://www.cissoid.com
CHT-LDOS - Preliminary datasheet
Measurements (CHT-LDOS-150)
Note: Temperatures hereafter are ambient temperatures, not junction temperatures.
15.2
15.1
15
16
14
12
10
8
-
VOUT (V)
25°
100°
150°
200°
225°
VOUT (V)
225°
200°
150°
100°
25°
6
-
4
14.9
14.8
2
225°
-
ILoad (A)
ILoad (A)
0
0
0.5
1
1.5
2
2.5
0
0.5
1
1.5
2
2.5
Figure 1: Vout vs. ILoad @ 2V dropout
Figure 2: Zoom on figure 1
0.4
15.15
ISC (A)
VOUT (V)
0.35
0.3
15.1
15.05
15
0.25
0.2
0.15
0.1
14.95
14.9
0.05
0
T(°C)
T(°C)
-50
50
150
250
-50
0
50
100
150
200
250
Figure 3: Typical short-circuit current vs. T°
Figure 4: Vout vs. T° (2V dropout, 3 samples)
15.2
VOUT (V)
225°
200°
15.1
15
150°
100°
25°
-
14.9
Tbd
Should be very similar to CHT-LDO datasheet
VIN (V)
14.8
15
17
19
21
23
25
27
29
Figure 5: Vout vs. Vin over T°
Figure 6: Input ripple rejection
0.0045
Iquiescent (A)
0.0043
-
0.0041
25°
0.0039
100°
Tbd
200°
225°
0.0037
Should be very similar to CHT-LDO datasheet
VIN(V)
0.0035
16
18
20
22
24
26
28
30
Figure 8: SVout(V²/Hz) @25°C, ILoad=100mA
Figure 7: IQuiescent vs. Vin over T°
Version 1.0 (17/05/2006)
4
http://www.cissoid.com
Tbd
Should be very similar to CHT-LDO datasheet
Figure 9: Typical max load current over T° vs. dropout
AC rejection, noise and maximum load current vs. dropout measurements have not been
performed yet on CHT-LDOS family. However, based on simulation results, measurements
result should be very similar to those presented in our CHT-LDO family datasheet.
Available packaging and pinout.
TO-3: (Bottom View)
TO-254:
Not Connected.
CISSOID
CHT-LDO-XXX
n
i
5
1
.
0
Vin
Vout
gnd
Bottom View
Contact & Ordering
CISSOID S.A.
Chemin du Cyclotron 6
1348 Louvain-la-Neuve
Belgium
Tel : +3210489210
Fax : +3210489219
sales@cissoid.com
http://www.cissoid.com
Product Reference : CHT-LDOS-XXX-YYYY
XXX= Output voltage. Example : 3.3V=033 ; 5V =050 ; 15V=150
YYYY=Package. TO3 or TO254 or DIE
Ex: CHT-LDOS-050-TO3 = 5V voltage regulator with TO3 package
Disclaimer
Neither CISSOID, nor any of its directors, employees or affiliates make any representations or extend any warranties
of any kind, either express or implied, including but not limited to warranties of merchantability, fitness for a particular
purpose, and the absence of latent or other defects, whether or not discoverable. In no event shall CISSOID, its
directors, employees and affiliates be liable for direct, indirect, special, incidental or consequential damages of any
kind arising out of the use of its circuits and their documentation, even if they have been advised of the possibility of
such a damage. The circuits are provided “as is”. CISSOID has no obligation to provide maintenance, support,
updates, or modifications.
相关型号:
CHT-LDOS-100
High-Temperature, 2.5V; 3.3V; 5V; 5.5V; 9V; 10V; 12V; 13V or 15V, 1A, Low-Dropout SOI-CMOS Voltage Regulator for symmetrical voltage applications.
ETC
CHT-LDOS-120
High-Temperature, 2.5V; 3.3V; 5V; 5.5V; 9V; 10V; 12V; 13V or 15V, 1A, Low-Dropout SOI-CMOS Voltage Regulator for symmetrical voltage applications.
ETC
CHT-LDOS-130
High-Temperature, 2.5V; 3.3V; 5V; 5.5V; 9V; 10V; 12V; 13V or 15V, 1A, Low-Dropout SOI-CMOS Voltage Regulator for symmetrical voltage applications.
ETC
CHT-LDOS-150
High-Temperature, 2.5V; 3.3V; 5V; 5.5V; 9V; 10V; 12V; 13V or 15V, 1A, Low-Dropout SOI-CMOS Voltage Regulator for symmetrical voltage applications.
ETC
©2020 ICPDF网 联系我们和版权申明