D63696475024 [ETC]
Display Receiver with Limit Outputs; 显示屏与接收器输出的限制型号: | D63696475024 |
厂家: | ETC |
描述: | Display Receiver with Limit Outputs |
文件: | 总3页 (文件大小:107K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
®
Display Receiver with Limit Outputs
Type D 6369 6475
Du line
Fieldbus Installationbus
• 4-digit 7-segment LED-display with sign
• Freely scaleable
• 2 relay limit outputs (HI, LO)
• 2 NPN transistor limit outputs (HIHI, LOLO)
• LED-indication for all limit outputs
• Automatic or manual reset of limit outputs
• Protocol selectable (3 1/2-digit BCD, 4-digit BCD,
8 bit binary)
• Multiplex or normal mode
• Internal or external selection of multiplex address
• AC power supply
Product Description
Ordering Key
D 6369 6475 024
Freely scaleable Dupline®
4
Type: Dupline®
Type no.
values or time. 4 limit outputs
with LED-indication. Protocol
selectable (3 1/2 digit BCD,
4-digit BCD, 8 bit binary)
digit LED-display with sign,
for panel mounting. Readout
of analog signals, counter
Supply
Type Selection
Supply
Ordering no.
8/16 channels
4-digit LED
24 VAC
115/230 VAC
D 6369 6475 024
D 6369 6475 230
No code module required
Input/Output Specifications
Inputs
Display
Display format
Display range
Limit output reset
1 contact or NPN transistor
4 contacts or NPN transistors
5 VDC
50 µA
≤ 10 Ω
≤ 2 m
7-segment
-9999 to +9999 (4 digits)
LED
14.2 mm
Red
Yes
Configurable by keys
Yes
Yes
Multiplex address selection
Open loop voltage
Short circuit current
Contact resistance
Cable length
Display type
Height of digits
Display colour
Change of sign (automatic)
Decimal point
Scaling feature
Multiplex feature
Display test
Dielectric voltage
Inputs - Dupline®
≥ 500 VAC (rms)
≥ 4 kVAC (rms)
≥ 4 kVAC (rms)
Inputs - Relay outputs
Inputs - Transistor outputs
Yes
Transmission protocol
3 1/2, 4-digit BCD,
8 bit binary
4 (HIHI, HI, LO, LOLO)
HI, LO - limit outputs
Isolated in groups of
Contact ratings (AgCd0)
2 SPST relays
2 x 1
µ (micro gap)
Limit values
Resistive load
AC1
DC1
or
5 A/250 VAC (1100VA)
0.25 A/250 VDC (62 W)
5 A/25 VDC (125 W)
2.5 A/230 VAC
5 A/24 VDC
Settings
Channel address
Keys and display
Keys and display
Keys and display
Keys and display
Keys and display
Keys and display
Keys and display
2 DIP switches
Multiplex address (internal)
Scaling
Decimal point position
Limit values
Normal/multiplex mode
Enable/disable limit outputs
Transmission protocol
Internal/external selection of
multiplex address
Automatic/manual reset of
limit outputs
Inductive loads
Mechanical life
AC15
DC13
≥ 30 x 106 operations
Electrical life (max. load)AC1 ≥ 2.5 x 105 operations
Operating frequency
Dielectric voltage
≤ 7200 operations/h
Outputs - Dupline®
≥ 4kVAC (rms)
Outputs - transistor outputs ≥ 4kVAC (rms)
1 DIP switch
1 DIP switch
Specifications are subject to change without notice (12.10.05)
1
Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group
D 6369 6475
®
Du line
Fieldbus Installationbus
Supply Specifications
Display Specifications
HIHI, LOLO limit outputs
Watchdog-output
Isolated in groups of
Output voltage range VBB
Reverse-polarity protection
Current per output
2 NPN transistors
1 NPN transistor
1 x 3
6-60 VDC
None
≤ 250 mA
100%
None
Power supply
Rated oprational
voltage
Overvoltage cat. III (IEC 60664)
230
024
115 and 230 VAC 15%
24 VAC 15%
45 to 65 Hz
≤ 4.5 ms
Typ. 8 VA
Frequency
Dropout tolerance
Rated operational power
Rated operational withstand
Total load capability
Short-circuit protection
Built-in protective diodes
Off-state leakage current
Output voltage drop
Dielectric voltage
None
≤ 500 µA
≤ 2.5 V
voltage
230
024
4 kV
800 V
Dielectric voltage
Supply - Dupline®
Supply - Inputs
Supply - Relay outputs
Supply - Transistor outputs ≥ 4 kVAC (rms)
≥ 4 kVAC (rms)
≥ 4 kVAC (rms)
≥ 4 kVAC (rms)
Outputs-Dupline®
≥ 4 kVAC (rms)
Response time
Multiplex input
Reset inputs
Limit outputs
Watchdog output
≥ 1 pulse train
≥ 1 pulse train
≥ 1 pulse train
≥ 1 pulse train
General Specifications
Power ON delay
≤ 3s
Indication for
HIHI limit output
HI limit output
LO limit output
LOLO limit output
LED, red
LED, yellow
LED, yelow
LED, red
Environment
Degree of protection
Pollution degree
IP 20
3 (IEC 60664)
Operating temperature
Storage temperature
0° to +60°C (+32° to +140°F)
-25° to +85°C (-13° to +185°F)
Humidity (non-condensing)
0 to 80%
Mechanical resistance
Shock
Vibration
15 g (11 ms)
2 g (6-55 Hz)
Material
Weight
Glass-reinforced Noryl
460 g
Approvals
UL, CSA
Mode of Operation
4-digit 7-segment LED dis-
play used to monitor analog
signals, counter values or
time of the day.
With the 4 keys at the front
the display shifts to program
mode, in which scaling, dec-
imal point position, limit value
settings, channel address,
multiplex address etc. is con-
figured.
Each output can be allocated pared to the 4 limit settings,
freely to any scaled display blinking upon limit alarm,
value. The limit outputs turn steady state after a manual
on whenever the value con- reset. The display can be
trolling the outputs is equal used in normal mode as well
or above the limit value as in multiplex mode (3 1/2-
setting for HI and HIHI (equal digit BCD protocol only).
The display value is freely
scaleable within the range
-9999 to +9999 with select-
able position of the decimal
point. Values from 3 1/2-digit
BCD, 4-digit BCD and 8-bit
binary transmitters can be
displayed, since the trans-
mission protocol is select-
able.
or below for LO and LOLO).
When used in multiplex
mode, the multiplex address
For further information please
refer to the "User Manual"
delivered with the unit.
It is selectable whether the for the display may be
limit outputs shall be reset selected by a selector switch
automatically (by the value (e.g. on the cabinet door) that
controlling the limit outputs connects to the "Multiplex
returning to normal) or man- Address" inputs. Each of the
ually by activation of the display values from the 16
"Limit Reset" - input. The limit multiplex addresses can be
outputs may also be disabled scaled individually. The limit
4 limit outputs are available:
if this feature is not required.
value setting however will
always refer to the multiplex
HI, LO
HIHI, LOLO
-relay outputs
-NPN transis-
tor outputs
4 LEDs at the front also address defined during the
indicate the signal level com- configuration.
2
Specifications are subject to change without notice (12.10.05)
Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group
D 6369 6475
®
Du line
Fieldbus Installationbus
Multiplex Address Selection Inputs
Settings
Multiplex
address
Multiplex address
input terminals
MSB
LSB
0
1
2
3
4
5
6
7
8
9
a
b
c
d
e
f
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
DIP-switch for
function selection
Programming keys
Dimensions (mm)
Functional Description
Power Supply
Reset Input
Common
Watch Dog
HiHi Output
LoLo Output
Multiplex Input for readout
Dupline®
Dupline® Signal
÷
Panel cut-out
Lo Output
Hi Output
Power supply
Panel thickness
Wiring Diagrams
Specifications are subject to change without notice (12.10.05)
Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group
3
相关型号:
©2020 ICPDF网 联系我们和版权申明