DP-652 [ETC]
Miniature LCD Display DigitalPanel Meters; 微型液晶显示器DigitalPanel米型号: | DP-652 |
厂家: | ETC |
描述: | Miniature LCD Display DigitalPanel Meters |
文件: | 总2页 (文件大小:110K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DP-650 Series
Miniature LCD Display Digital Panel Meters
Description
The DP-650 Series is an ultra-compact, low-power LCD meter requiring only 15mW of
power. This meter is ideal for applications requiring a highly reliable LCD display in a
small package. The snap-in bezel packaging enables easy and rapid installation of the
meter. The simplicity of design, overvoltage protection, and low power consumption all
contribute to the high reliability of this device.
Three input voltage ranges are available: 200mV, 2VDC, and 20VDC. A 4-20mA
current input adapter (DP-670) is also offered. Automatic polarity, overrange indication,
adjustable decimal point, and display HOLD are standard features. The DP-650 Series
employs a dual slope integrating A/D converter, and operates from an internal 100mV
reference via a precision DC-to-DC converter. Typical accuracy is 0.1%.
F e a t u r e s
T e c h n i c a l N o t e s
1. The connection shown utilizes differential inputs. For single-ended operation, INPUT(-) is
strapped to GND. If the signal is isolated from the power source, connect INPUT(-) to GND
either directly or through a 10K resistor network as shown to reduce common mode errors.
•
•
•
•
•
•
•
•
Convenient snap-in bezel package
Very low power consumption (5VDC @ 3mA)
Differential input, 3 voltage ranges
0.1% typical accuracy
2. Display holds reading when HOLD is high (+5V). Readings are updated when HOLD is low
or floating.
User-selectable decimal point
Hold-display function
3. The decimal point is user selectable by connecting the decimal point pins (4, 5, or 6) to DP
COM (pin 3).
Overvoltage protection
4. Full-scale input span is adjusted prior to shipment. Further calibration is possible by adjusting
the trimpot mounted on the back of the DPM.
Quantity discounts
5. Unused pins should be left open.
A p p l i c a t i o n s
O r d e r i n g I n f o r m a t i o n
•
•
•
•
Portable/mobile equipment
Medical instruments
Model
DP-650
DP-652
DP-654
APS-5
C-10
Description
Avionics/aerospace systems
Office equipment
Miniature DPM LCD 200mV
Miniature DPM LCD 2V
Miniature DPM LCD 20V
120V AC to 5V DC Power Supply
Connector - 10 pin
6
•
1 - 8 8 8 - 4 7 2 - 6 6 7 6
•
F a x 1 - 8 8 8 - 2 1 0 - 0 1 1 9
•
a c c u l e x . c o m
DP-650 Series
D i m e n s i o n s
C o n n e c t i o n s
Pin No.
Pin Name
Description
1
2
3
4
5
6
7
8
9
10
V+
+5V power supply
GND
Power supply ground
DP COM
DP1
Decimal point return
1XX.X (connect to DP COM to turn on)
1X.XX (connect to DP COM to turn on)
1.XXX (connect to DP COM to turn on)
Positive input signal
DP2
DP3
INPUT(+)
INPUT(-)
NC
Negative input signal (see Technical Note 1)
No connection required
HOLD
Hold last display (see Technical Note 2)
S p e c i f i c a t i o n s
Display
Digits
3½ ( 1999 count)
Type
7-segment LCD
Digit Height
Polarity Indication
Decimal Point
.39in (10mm)
Automatic - for neg input
3 position selectable
Overrange Indication 1--- for positive, -1--- for negative
OtherFeatures/Options Display hold function
Signal Inputs
Configuration
Bipolar, differential
200mV, 2V, 20V
Full-Scale Input
Input OffsetAdjustment Auto zero
Input Impedance
10MΩ ( 200mV), 1MΩ (other ranges)
Common Mode Range 1VDC
Common Mode Rejection>86dB
Overrange Protection 350VDC ( 100 VDC for 200mV range)
Input Bias Current
Control Inputs
1pA typical, 100pA max
Decimal point select, hold function
3.3 readings/s
Performance
Sampling Rate
inches (mm)
Accuracy
(0.1% + 2 counts) typ, (0.2% + 2 counts) max
10 min
Temperature Drift, typical 100 ppm/°C
Power Supply Requirements
Supply Voltage
Supply Current, typical 3mA
Warmup, typical
+5VDC 5%
Physical
Package Style
Dimensions
Panel Cutout
Weight
Snap-in bezel mount
2.30 x 1.10 x .71
2.22 x 1.04
0.7oz (20g)
Connector
Bezel
C-10 (10-pin) optional
Snap-in bezel included
Environmental Requirements
Operating Temperature 0 to 50°C
Storage Temperature -10 to 60°C
Relative Humidity
0 to 95% non-condensing
7
•
1 - 8 8 8 - 4 7 2 - 6 6 7 6
•
F a x 1 - 8 8 8 - 2 1 0 - 0 1 1 9
•
a c c u l e x . c o m
相关型号:
DP-F201-001-1-2
Telecom and Datacom Connector, 20 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
DP-F201-001-1-2-TR
Telecom and Datacom Connector, 20 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
DP-F201-001-1-3-TR
Telecom and Datacom Connector, 20 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
DP-F201-001-2-2
Telecom and Datacom Connector, 20 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
DP-F201-001-2-3
Telecom and Datacom Connector, 20 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
DP-F201-001-2-4
Telecom and Datacom Connector, 20 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
DP-F201-001-2-4-TR
Telecom and Datacom Connector, 20 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
DP-F201-001-A-1-TR
Telecom and Datacom Connector, 20 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
DP-F201-001-A-2
Telecom and Datacom Connector, 20 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
AMPHENOL
©2020 ICPDF网 联系我们和版权申明