E15S650M [ETC]
SMPS Controller ; SMPS控制器\nE S ERIES
2 0 WATTS
TO 2 0 WATTS - E S ERIES
Switching Buck Regulator
FEATURES
• Single Output
• High Efficiency
• Encapsulated Supply
• Various Mounting Options
• 1500V RMS isolation
• Power Foldback Short Circuit Protection
• Output Current Limiting
• Ten Year Warranty
THE E S ERIES FROM WALL
INDUS TRIES
The E Series high efficiency AC/DC power supply offers the
designer a low cost solution to problems normally associated
with series-pass regulated supplies. By employing state-of-the-
art switching techniques, this series achieves efficiencies up to
75%.
S P ECIFICATIONS : E S ERIES
All specifications apply @ +25 C ambient unless otherwise
noted.
GENERAL SPECIFICATIONS
INPUT SPECIFICATIONS
Efficiency ..............................................................70% (typical)
Isolation Voltage (input to output)..........................1500V RMS
Isolation Resistance (input to output) ..........................100MW
Remote Sense ......................................................................N/A
Switching Frequency........................................40kHz (variable)
Input Voltage Range....105-125VAC(see options for alternates)
Input Frequency ..........................................................50-440Hz
Remote On/Off Control ........................................................N/A
OUTPUT SPECIFICATIONS
Output Current..............................................................See table
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature ..............................-25 to +85°C (case)
Output Voltage Tolerance........................................±1% (fixed)
Output Trim (external) ........................................................N/A
Line Regulation (LL-HL)................................................±0.15%
Load Regulation (10-100% load)....................................±0.15%
Short Circuit Protection ....................................Power Foldback
Over Voltage Protection........................................................N/A
Ripple/Noise (20MHz BW) ......................................<7mV RMS
Transient Response ..............................................................N/A
Storage Temperature ............................................-55 to +100°C
Humidity (non-condensing)............................20% to 95% R.H.
PHYSICAL SPECIFICATIONS
Dimensions: Case A............................................1.25 x 2.5 x 3.5”
Case B ................................................1.55 x 2.5 x 3.5”
Case C ................................................2.00 x 2.5 x 3.5”
Case Material..........................................................Non-metallic
Due to advances in technology, specifications subject to change without notice.
9 8
6 0 3 -7 7 8 -2 3 0 0
w w w .w allind us trie s .c o m
TO 2 0 WATTS
E S ERIES
P IN CONNECTIONS
Single
Input
Voltage Voltage
(VAC)
Output
Output
Current Height
(Amps) (inches)
Case
Model
Number
1
2
3
4
5
AC in
AC in
Return
N/C
(VDC)
*90
to
5
1.0
1.5
2.0
3.0
4.0
1.25
1.55
1.55
2.0
E5S1000
E5S1500
E5S2000
E5S3000
E5S4000
+Vout
130
Notes:
2.0
1. All case and pin to case dimensions reference only unless otherwise
noted.
2. Two threaded inserts for mounting, 4-40 x 0.10” deep min.
3. On single output units, do not connect common.
4. Five Pins, 0.04” diameter x 0.20” long (min.).
12
15
0.8
1.2
1.5
1.55
2.0
E12S800
E12S1200
E12S1500
2.0
*OP TIONS : See Options Selection Guide for additional power sup-
ply options and proper pin connections. Add option letter(s) to end of
part number when specifying.
AC Input Options: K Option allows operation with 200-252VAC in.
K2 Option accepts 105-125 and 200-252VAC (jumper
selectable)
0.65
1.0
1.5
1.0
1.55
2.0
2.0
2.0
E15S650
E15S1000
E15S1500
E19S1000
19
24
N Option accepts 90-105VAC
UK Option accepts 216-265VAC
0.4
1.55
E24S400
M Option specifies 2.2” pin spacing between Vin pins.
Screw Terminals available for chassis mounting on all models.
9 9
Wall Ind us trie s , Inc.
6 0 3 -7 7 8 -2 3 0 0
相关型号:
©2020 ICPDF网 联系我们和版权申明