EASER404-NLW [ETC]
THE SERIALS DOTMATRIX DISPLAYS WITH RS-232;
| 型号： | EASER404-NLW |
| 厂家： | 
ETC |
| 描述： | THE SERIALS DOTMATRIX DISPLAYS WITH RS-232 |
| 文件： | 总20页 (文件大小：2250K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Issue 6.2012
THE SERIALS
DOTMATRIX DISPLAYS WITH RS-232
EA SER162-92NLED
with snap in housing
Accessories:
cable EA KV24-9B
length: 1,50 m
FEATURES
* 32 DIFFERENT SIZES OF DISPLAYS AVAILABLE (1x8 UP TO 16x40)
* SUPPLY VOLTAGE +5V OR OPTIONAL 9..35V1)
* INCL. LED-ILLUMINATION SWITCHABLE BY MEANS OF SOFTWARE
* 25 DISPLAYS WITH YELLOW/GREEN LED-BACKLIGHT
* 7 DISPLAYS WITH LOW POWER WHITE LED-BACKLIGHT
* 3 DISPLAYS WITH SNAP IN HOUSING
* HIGH CONTRAST SUPERTWIST LCD
* INCL. FRONTAL BEZEL WITH ANTIGLARE GLASS2)
* AUTOMATIC LINE MANAGEMENT
* CR / LF / SCROLL / CURSOR POSITIONING
* BAUDRATE SETTING BY JUMPER: 300, 1200, 2400 OR 9600 BAUD
* POTI FOR CONTRAST ADJUSTMENT ON BOARD
* MULTIPLE DISPLAYS ON SINGLE RS-232C
OPTIONS
* SUPPLY +9..35V= INSTEAD OF +5V=
* RS-422 INTERFACE INSTEAD OF RS-232 (STANDARD)
* DIP-SWITCH FOR ADDRESS INSTEAD OF SOLDERBRIDGE
EA OPT-9/35V1)
EA OPT-RS4221)
EA OPT-DIP61)
ACCESSORIES
* CABLE WITH 9-PIN D-SUB FEMALE PLUG FOR PC
EA KV24-9B
1) not available with SER308, SER408, SER3016 and SER4016
2) not available with SER082-C, SER204-4, SER242-B, SER3016 and SER4016
Zeppelinstr. 19 · D-82205 Gilching · Phone +49-8105-778090 · Fax +49-8105-778099 · www.lcd-module.de · info@lcd-module.de
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 2
General
The Serials represents a complete LCD-Dotmatrix familiy with
input circuit and frontal bezel.These LCD-modules also includes
a RS-232 interface (or optional RS-422).The mounting is done
through holes of the LCD-module, the data connection is made
to a standard RS-232C/RS-422 interface. Transfer rate can be
set by jumper on 300, 1200, 2400 or 9600 Baud. All cursor
controls (line feed etc.) are performed automatically.All displays
feature LED-backlight illumination. Matching frontal bezel with
antiglare glass is included also.
scheme
Power SUPPLY / CONTRAST ADJUSTMENT
Supply voltage is +5V, current consumption depends on type of display and its illumination (100-800
mA, see table on page 20). The Serials can be connected to power either by screw terminals or with
RS-232 connector. Display contrast is adjustable by potentiometer.
important:It is imperative that the polarity is correct. Even very brief polarity reversal can damage the
entire operating unit immediately and irreparably.
9..35V Versorgung bei Displays im Snap-In
Multiple Displays on a single RS-232C
A single RS-232C can operate a number of displays. For that an individual adress must be assigned
to each display. Commands "Select/Deselect" will target each individual display.
Adresseinstellung per Lötbrücken
Adresseinstellung über DIP-Schalter
Adresseinstellung bei Displays im Snap-In
1) not available with SER308, SER408, SER3016 and SER4016
2) not available with SER082-C, SER204-4, SER242-B, SER3016 and SER4016
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 3
COMMANDS, DATA TRANSFER
All incoming datas will be largely interpretated as ASCII datas. When display fills up, the characters
automatically scroll to the top. CR/LF will be recognized and executed. FF (12d/$0C) clears the
display. Cursor can be set manually by command i.e. "ESC O" (ESC=27d/$1B).
after
Reset
TABLE OF COMMANDS
Command
Code
Remark
Formfeed FF (dec.:12)
Carriage Return CR (13)
Linefeed LF (dec.:10)
Cursor positioning
^L
^M
Clear screen and place cursor to home position (1,1)
Set cursor into first column left hand
Move cursor down to next line
^J
ESC
O
C
n1 n2
n1=column; n2=line; home-position (1,1) top left hand
Hidden cursor
1,1
3
0
1
2
3
1
2
3
4
Cursor in form of a flashing block
Cursor as an underscore
Cursor Form
ESC
Cursor in form of a flashing block with an underscore
Clear-mode; autoflow OFF
Clear-mode; autoflow ON
Display Mode
ESC
ESC
M
4
Scroll-mode; autoflow OFF
Scroll-mode; autoflow ON
S
D
Select interface adress adr=0..254; (adr 255=all)
Deselect interface adress adr=0..254; (adr 255=all)
select-
ed
Select / Deselect
adr
The 1-line, 2-line and 4-line displays offer beside standard-commands additional options:
after
Reset
additional commands for 1..4 line displays
Command
Code
Remark
5
6
0
Overwrite-mode; autoflow OFF
Display Mode
ESC
M
U
4
1
Overwrite-mode; autoflow ON
no character code conversion
Convert Character Code ESC
1
convert character code to IBM-Code (for englisch/japanisch character set)
n1=character no. (0..7); data = 8x bytes for new character
LED backlit n1=0: off, n1=1: on; n1=2: invert; n1=3..255 n1/10 sec. on
Define character
LED backlit on/off
ESC
ESC
Z
L
n1
n1
8 x data...
on
n1=0: Set all 6 output ports in accordance with n2 (=6-bit binary value)
n1=1..8: Reset output port n1 (n2=0); set (n2=1); invert (n2=2)
Shows the version number on the display
all
1
Write output port
Version Number
Reset
ESC
ESC
ESC
Y
V
R
n1 n2
Resets and re-initializes the display and controller.
Before sending new data over the RS-232/RS-422 wait 500.
The 8-line and 16-line displays offer beside standard-commands additional options:
after
Reset
additional commands for 8- and 16-line displays
Command
Code
Remark
5
6
7
8
Clear-mode; autoflow OFF
Clear-mode; autoflow ON
Scroll-mode; autoflow OFF
Display Mode
ESC
ESC
M
4
Scroll-mode; autoflow ON
N
I
Set standard type; black letters; bright background
Set inverse letters; bright letters; black background
Flashing letters; black letters flash on bright background
Invers+flashing; bright letters flash on black background
Saves cursorform, display-mode and font-type in EEPROM
Assignes a new select/deselect adress (8 bit) to the interface
Set letter type
N
B
L
P
A
Save actual settings
Select / Deselect
ESC
ESC
adr
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 4
RS-232C Connection / Baud rates
RS-232C socket (2x5 pins)
Pin Symbol Function
Pin Symbol Function
Connection to RS-232C or RS-422 interface is made on a 2x5
pin type socket. With cable EA KV24-9B (accessories not for
RS-422) The Serials are ready to be connected directly to a PC.
Transfer rate can be set by jumper on 300, 1200, 2400 or 9600
Baud.
connection to
DSR and DTR
1
VDD
+5V
2
DCD
connection to
DCD and DTR
3
5
7
DSR
CTS
RTS
4
6
8
NC
RXD
DTR
not connected
data input
CTS and RTS
bridged
connection to
DSR and DCD
RXD5 close
CMOS LB10+LB17
9
10
GND
0V
RS-422 socket (2x5 pins)
Data format:
Pin Symbol Function
Pin Symbol Function
1
3
5
7
9
VDD
+5V
2
4
Data In- Receive Data
Data In+ Receive Data
NC
HS In-
HS Out-
GND
not connected
HS In- and
HS Out-
bridged
NC
not connected
6
If no jumper is set during power on, the display switches into
self test mode and shows its character set.
HS In+ and
HS Out+
bridged
HS In+
HS Out+
8
10
0V
If the operating unit is ordered together with the EA OPT-RS422 option, special RS-422 drivers are
fitted. The pin assignment in the table on the right then applies.
Incidentally, the same serial data with 5V level and CMOS logic
is available at Pin 9.These level are suitable for direct connection
to a µC. If these signal is used, the solder straps LB 10 + LB 17
must be closed!
Connection for SER308,SER408,SER3016,SER4016
Connection for displays with snap-in
Connection for 1- to 4-line diplays
Connection for displays with snap-in with EA OPT-RS422
Connection for 1- to 4-line diplays with EA OPT-RS422
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 5
Digital output1)
There are up to 6 digital outputs OUT1..OUT6. They share with the solder link for address setting
(cannot be used with EA OPT-DIP6).When one or more outputs are used, the possibility for address
set is limited automatically.
All versions except EA S ERxxx-92
Displays with Snap-In case (EA SERxx-92)
After Power-On all output are set to HIGH. Setting an output will be done by following command:
'ESCY n1 n2'
n1: Output no. 1, 2, 3, 4, 5 or 6
n2=0: Output set to LOW (0V); n2=1: Output set to HIGH (5V); n2=2: Invert output
Application example1)
Each output line provides a NPN transistor with about 50kOhm pull-up resistor; i.e. only LO level is
able to supply about 10mA. In summary current for
OUT1..OUT6 may not exceed 15mA. HIGH level is
able to source up to 100µA only. Driving a higher
load signal must be amplified by an external
transistor or MOSFET.
1) not for SER308, SER408, SER3016 and SER4016
Self defined character1)
character data
bit value
8 character (ASCII codes $00..$07) are presetted with " ", " ", "ꢀ",
"³", "ß", "Ä", "Ö", "Ü" and can be redefined with the command
"ESC Z n1 data...". After re-definition the presetted codes are no
longer available. It makes sense to switch off the relocation of
ASCII codes via command 'ESC U 0'.
After power-on or reset the predefined codes are avaiable again.
Example:
ESC Z $00 $04 $04 $04 $04 $15 $0E $04 $00
After that, character code $00 is defined as an downside arrow.
Note: For definition 8 data bytes are necesary.
hex (dez)
16
0
8
0
0
0
0
0
1
0
0
4
1
1
1
1
1
1
1
0
2
0
0
0
0
0
1
0
0
1
0
0
0
0
1
0
0
0
$04 (4)
$04 (4)
$04 (4)
$04 (4)
$15 (21)
$0E (14)
$04 (4)
$00 (0)
0
0
0
1
0
0
0
1) not for SER308, SER408, SER3016 and SER4016:
only the complete character set can be exchanged
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 6
Character set:
1- to 4-line displays
All character listed beside are built-in
for the 1- to 4-line displays.
Character set:
Character set:
EA SER204-92HNLED
8- and 16-line displays
TheEA SER204-92HNLED do have a different All 8- and 16-line displays EA SER308, SER408,
character set.
SER3016 und SER4016 do provide the extended
IBM character set (codes 32..255) incl. frame
symbols.It is also possible to excange the character
set totally (e.g. for cyrillic or special codes).This can
be done together with the tools on EA DISK9708*).
+ Lower
$0 $1 $2 $3 $4 $5 $6 $7 $8 $9 $A $B $C $D $E $F
(0) (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)(11)(12)(13)(14)(15)
Upper
$20 (dez: 32)
$30 (dez: 48)
$40 (dez: 64)
$50 (dez: 80)
$60 (dez: 96)
$70 (dez: 112)
$80 (dez: 128)
$90 (dez: 144)
$A0 (dez: 160)
$B0 (dez: 176)
$C0 (dez: 192)
$D0 (dez: 208)
$E0 (dez: 224)
$F0 (dez: 240)
*) also in internet at http://www.lcd-module.de/deu/disk/disk9708.zip
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 7
EA SER081-92NLED
incl. snap in housing EA 0092-KE
1x8,ZH 11.48mm
Panel cut out: 70,5+0,5 x 48,5+0,5 mm
EA SER081-CNLED
incl. frontal bezel EA 017-2UKE
1x8,ZH 10.8mm
EA SER161-DNLED
incl. frontal bezel EA 017-1UKE
1x16,ZH 6.6mm
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 8
EA SER161-ENLED
incl. frontal bezel EA 017-6UKE
1x16,ZH 9.66mm
EA SER082-CNLED
incl. frontal bezel EA 017-8UKE
1x8,ZH 11.44mm
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 9
EA SER162-N3LW
incl. frontal bezel EA 017-2UKE
2x16,ZH 5.55mm
EA SER162-CNLED
incl. frontal bezel EA 017-1UKE
2x16,ZH 4.35mm
EA SER162-NLED
incl. frontal bezel EA 017-2UKE
2x16,ZH 5.55mm
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 10
EA SER162-NLW
incl. frontal bezel EA 017-2UKE
2x16,ZH 5.55mm
EA SER162-BNLED
incl. frontal bezel EA 017-12UKE
2x16,ZH 9.66mm
EA SER162-BNLW
incl. frontal bezel EA 017-12UKE
2x16,ZH 9.66mm
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 11
EA SER162-92NLED
incl. snap in housing EA 0092-KE
2x16,ZH 6.68mm
Panel cut out: 70,5+0,5 x 48,5+0,5 mm
EA SER202-NLED
incl. frontal bezel EA 017-7UKE
2x20, ZH 5.55mm
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 12
EA SER202-NLW
incl. frontal bezel EA 017-7UKE
2x20, ZH 5.55mm
EA SER202-BHNLED
without frontal bezel
2x20,ZH 9.2mm
EA SER202-CNLW
2x20,ZH 12.7mm
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 13
EA SER242-NLED
incl. frontal bezel EA 017-14UKE
2x24,ZH 5.55mm
EA SER242-BNLED
without frontal bezel
2x24,ZH 9.66mm
EA SER402-NLED
incl. frontal bezel EA 017-4UKE
2x40,ZH 5.55mm
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 14
EA SER402-NLW
incl. frontal bezel EA 017-4UKE
2x40,ZH 5.55mm
EA SER164-NLED
incl. frontal bezel EA 017-8UKE
4x16,ZH 4.75mm
EA SER204-92HNLED
incl. snap in housing EA 0092-KE
4x20,ZH 3.73mm
Panel cut out: 70,5+0,5 x 48,5+0,5 mm
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 15
EA SER204-4NLED
without frontal bezel
4x20,ZH 4.03mm
EA SER204-NLED
incl. frontal bezel EA 017-9UKE
4x20,ZH 4.75mm
EA SER204-NLW
incl. frontal bezel EA 017-9UKE
4x20,ZH 4.75mm
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 16
EA SER204-BNLED
incl. frontal bezel EA 017-25KE
4x20,ZH 9.2mm
EA SER404-HNLED
incl. frontal bezel EA 017-13UKE
4x40,ZH 4.89mm
EA SER404-NLW
incl. frontal bezel EA 017-13UKE
4x40,ZH 4.89mm
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 17
EA SER308-NLED / SER408-NLED
incl. frontal bezel EA 017-10UKE
8x30 bold / 8x40,ZH 4.2mm
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 18
EA SER3016-NLED / SER4016-NLED
without frontal bezel
16x30 bold / 16x40,ZH 3.55mm
ATTENTION
CAUTION!
Use ESD precautionary procedures
Electrostatic sensitive components
handling precautions!
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 19
FRONTAL BEZEL / DIMENSIONS
Drawing shows the nose piece for frontal bezels EA 017-xxUKE; EA
017-xxKE have a rim on full circumference.
Viewing area
Outside dim.
Mounting size
Display type
Frontal Bezel
G
A
B
C
D
E
F
1 line displays
EA SER081-CNLED
EA SER161-DNLED
EA SER161-ENLED
60,0
63,5
98,5
14,8
12,8
12,8
76,0
79,5
27,0
25,0
25,0
66,2
69,7
21,2
19,2
19,2
71,0
74,5
EA 017-2U
EA 017-1U
114,5
104,7
109,5 EA 017-6U
2 line displays
EA SER162-N3LW
EA SER162-CNLED
60,0
63,5
14,8
12,8
76,0
27,0
25,0
66,2
69,7
21,2
19,2
71,0
74,5
EA 017-2U
EA 017-1U
79,5
EA SER162-NLED
EA SER162-NLW
60,0
97,4
14,8
22,4
76,0
27,0
34,6
66,2
21,2
28,8
71,0
EA 017-2U
EA SER162-BNLED
EA SER162-BNLW
113,4
103,6
108,4 EA 017-12U
92,5 EA 017-7U
EA SER202-NLED
EA SER202-NLW
81,5
92,0
17,2
14,8
14,8
97,5
108,0
169,0
29,4
27,0
27,0
87,7
98,4
23,6
21,2
21,2
EA SER242-NLED
103,0 EA 017-14U
164,0 EA 017-4U
EA SER402-NLED
EA SER402-NLW
153,0
159,2
4 line displays
EA SER164-NLED
60,8
75,0
24,2
24,2
41,5
28,0
76,8
36,4
36,4
53,7
40,2
67,0
81,2
30,6
30,6
47,9
34,4
71,8
86,0
EA 017-8U
EA 017-9U
EA SER204-NLED
EA SER204-NLW
91,0
137,0
161,0
EA SER204-BNLED
121,0
145,0
127,2
151,2
132,0 EA 017-25
156,0 EA 017-13U
EA SER404-NLED
EA SER404-NLW
8 line displays
147,0 50,2
EA SER308-NLED
EA SER408-NLED
131,0
38,0
137,2
44,4
142,0 EA 017-10U
Dimensions in mm
ELECTRONICASSEMBLYreserves
the right to change specifications
without prior notice. Printing and
typographical errors reserved.
THE SERIALS
Page 20
All Serials Overview
Serial displays with RS-232 and LED backlight
Keypad
EA OPT-
TAST5x5
Cutout
bezel
Module dimension Viewing area
Ordering
information
Lines x
Char.
Char.
height
Current
typ.
Bezel
NeW !
W
H
D
W
H
W
H
1 line displays
EA SER081-92NLED
EA SER081-CNLED
EA SER161-DNLED
EA SER161-ENLED
1 x 8
1 x 8
11.48
10.8
6.56
9.66
77.0 54.0 26.0 56.5
84.0 44.0 26.0 61.0
80.0 36.0 27.0 64.5
122.0 33.0 27.0 99.0
22.0
0092-KE
70.5
48.5
21.2
19.2
100 Snap-In
optional
optional
optional
15.8 017-2UKE 66.2
16.0 017-1UKE 69.7
30
1 x 16
1 x 16
100
170
13.0 017-6UKE 104.7 19.2
2 line displays
EA SER082-CNLED
EA SER162-N3LW
EA SER162-CNLED
EA SER162-NLED
EA SER162-NLW
EA SER162-92NLED
EA SER162-BNLED
EA SER162-BNLW
EA SER202-NLED
EA SER202-NLW
EA SER202-BHNLED
EA SER202-CNLW
EA SER242-NLED
EA SER242-BNLED
EA SER402-NLED
EA SER402-NLW
optional
optional
optional
optional
optional
2 x 8
11.44
5.55
4.35
5.55
5.55
6.68
9.66
9.66
5.55
5.55
9.2
84.0 44.0 27.5 63.0
80.0 36.0 27.0 64.5
80.0 36.0 27.0 64.5
84.0 44.0 29.0 61.0
84.0 44.0 27.0 64.5
77.0 54.0 26.0 56.5
122.0 44.0 29.0 99.0
122.0 44.0 29.0 99.0
116.5 39.0 29.0 85.0
116.5 39.0 26.0 85.0
25.0 017-8UKE 67.0
16.0 017-2UKE 66.2
13.8 017-1UKE 69.7
15.8 017-2UKE 66.2
16.0 017-2UKE 66.2
30.6
21.2
19.2
21.2
21.2
48.5
90
2 x 16
2 x 16
2 x 16
2 x 16
2 x 16
2 x 16
2 x 16
2 x 20
2 x 20
2 x 20
2 x 20
2 x 24
2 x 24
2 x 40
2 x 40
40
90
blue
blue
120
40
22.0
0092-KE
70.5
100 Snap-In
360
optional
optional
optional
optional
optional
optional
optional
optional
optional
optional
24.0 017-12UKE 103.6 28.8
24.0 017-12UKE 103.6 28.8
65
210
40
blue
blue
blue
18.6 017-7UKE 87.7
18.6 017-7UKE 87.7
23.6
23.6
146.0 43.0 29.0 123.0 23.0
190.0 54.0 29.0 149.0 31.0
-
-
127.2 28.4
270
100
150
190
150
40
12.7
5.55
9.66
5.55
5.55
-
-
21.2
-
118.0 36.0 29.0 93.5
15.8 017-14UKE 98.4
208.0 40.0 29.0 178.0 23.0
-
-
182.0 33.5 29.0 154.1 15.3 017-4UKE 159.2 21.2
182.0 33.5 27.0 154.1 15.3 017-4UKE 159.2 21.2
blue
4 line displays
EA SER164-NLED
EA SER204-92HNLED
EA SER204-4NLED
EA SER204-NLED
EA SER204-NLW
optional
4 x 16
4 x 20
4 x 20
4 x 20
4 x 20
4 x 20
4 x 40
4 x 40
4.75
3.73
4.03
4.75
4.75
9.2
87.0 60.0 29.0 61.8
77.0 54.0 26.0 56.5
80.8 47.0 29.0 60.0
98.0 60.0 29.0 76.0
98.0 60.0 29.0 76.0
25.4 017-8UKE 67.0
30.6
48.5
-
220
22.0
22.0
0092-KE
-
70.5
-
100 Snap-In
optional
optional
optional
optional
optional
optional
90
25.2 017-9UKE 81.2
25.2 017-9UKE 81.2
30.6
30.6
260
45
810
440
75
blue
blue
EA SER204-BNLED
EA SER404-HNLED
EA SER404-NLW
146.0 62.5 29.0 123.0 42.5 017-25KE 127.2 47.9
190.0 54.0 29.0 147.0 29.5 017-13UKE 151.2 34.4
4.89
4.89
190.0 54.0 29.0 147.0 29.5 017-13UKE 151.2 34.4
8 line displays
EA SER308-NLED
EA SER408-NLED
8 x 30
8 x 40
4.2 bold 180.0 65.0 29.0 134.0 40.2 017-10UKE 137.2 44.4
300
300
4.2
180.0 65.0 29.0 134.0 40.2 017-10UKE 137.2 44.4
16 line displays
EA SER3016-NLED
EA SER4016-NLED
16 x 30 3.6 bold 144.0 104.0 29.0 114.0 64.0
16 x 40 3.6 144.0 104.0 29.0 114.0 64.0
---
---
-
-
-
-
700
700
Dimensions in mm
Current in mA
ATTENTION
CAUTION!
Use ESD precautionary procedures
Electrostatic sensitive components
handling precautions!
Zeppelinstr. 19
·
D-82205 Gilching
·
Phone +49-8105-778090
·
Fax +49-8105-778099 · www.lcd-module.de · info@lcd-module.de
相关型号：
©2020 ICPDF网 联系我们和版权申明