EBG.1R.336.GLM 概述
CONN PNL MNT RCPT 36SKT
EBG.1R.336.GLM 数据手册
通过下载EBG.1R.336.GLM数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载COAXIAL, TRIAXIAL,
MULTI & MIXED CONNECTORS
SHORT FORM
CATALOGUE
®
®
Precision modular connectors to suit your application
Since its creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull
connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in
more than 80 countries with the help of over 40 subsidiaries and distributors.
Over 75000 connectors
The modular design of the LEMO range provides over 75000 connectors from miniature ø 3 mm to ø 50 mm, capable of
handling cable diameters up to 30 mm and for up to 114 contacts.
This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in
most markets, including medical devices, test and measurement instruments, machinery, audio video broadcast, tele-
communications and military.
LEMO’s Push-Pull Self-Latching Connection System
This self-latching system is renowned worldwide for its easy and quick mating and unmating features. It provides absolute
security against vibration, shock or pull on the cable, and facilitates operation in a very limited space.
The LEMO self-latching system allows the connector
to be mated by simply pushing the plug axially into
the socket.
Once firmly latched, connection cannot be broken
by pulling on the cable or any other component part
other than the outer release sleeve.
When required, the connector is disengaged by a
single axial pull on the outer release sleeve.
This first disengages the latches and then withdraws
the plug from the socket.
UL Recognition
LEMO connectors are recognized by the Underwriters Laboratories (UL). The approval of the complete system (LEMO
connector, cable and your equipment) will be easier because LEMO connectors are recognized.
CE marking
CE marking
means that the appliance or equipment bearing it complies with the protection requirements of one or
several European safety directives. CE marking
applies to complete products or equipment, but not to electrome-
chanical components, such as connectors.
RoHS
LEMO connector specifications conforms the requirements of the RoHS directive (2011/65/EU) of the European Parliament
and the latest amendments. This directive specifies the restrictions of the use of hazardous substances in electrical and
electronic equipment marketed in Europe.
www.lemo.com
®
®
Introduction
This catalogue gives the complete description of LEMO connectors with coaxial, triaxial and mixed contacts.
Mixed contacts include coaxial and low voltage contact configurations, as well as multi-coaxial contact configurations.
The LEMO manufacturing programme has been extended to almost 40 series divided into 7 product families with specific
mating and environmental characteristics. Each series includes a wide variety of plug, socket and coupler models, available
in contact configurations adapted to all round cables. The catalogue includes the B, K, S and E Series of the LEMO product
range. In addition the 00 Series (triaxial) connector is also represented.
Watertight and vacuumtight models are also available. Since LEMO connectors are perfectly screened and designed to
guarantee very low resistance to shell electrical continuity, they are particularly adapted to applications where electromagnetic
compatibility (EMC) is important.
Material and treatment
Surface treatment (µm)
Component
Material (Standard)
Notes
black chr.
chrome
nickel
gold
Cu Ni Cr Cu Ni Cu Ni Au Ni Cr
Brass (UNS C 38500)
0.5
3
0.3 0.5
3
0.5
3
0.5
1
2
Stainless steel (AISI 303, 304 or 316L)
Aluminium alloy (AA 6262A or AA 6023)
POM (Delrin® or Ertacetal®), Polyoxymethylene, black
PEEK, Polyether ethercetone, beige
PSU (Udel®), Polysulfone, grey or white
PPSU (Radel®), Polyphenylsulfone, cream
PPS (Ryton®), Polyphenilene sulfide, brown
Bronze (UNS C 54400) or special brass
Beryllium Copper (UNS C 17300)
Stainless steel (AISI 416 or 316L)
Special brass
without treatment
anodized
1)
2)
3)
3)
4)
5)
6)
7)
Outer shell, collet nut,
conical nut or notched
nut and oversized collet
–
–
–
–
–
–
–
–
–
–
–
0.5
0.5
3
3
0.5
0.5
3
3
1.0
1.0
–
–
–
–
Earthing crown
without treatment
0.3 0.5 0.5
without treatment
0.5
3
3
3
0.5
–
–
Latch sleeve
7)
Stainless steel (AISI 416 or 316L)
Bronze (UNS C 52100)
Locking washer
–
–
–
–
–
–
0.5
0.5
3
3
0.5
0.5
3
3
0.5
0.5
–
–
–
–
Brass (UNS C 38500)
8)
8)
Hexagonal or round nut
Stainless steel (AISI 303, 304 or 316L)
Aluminium alloy (AA 6262A or AA 6023)
Brass (UNS C 38500)
without treatment
anodized natural
–
–
–
0.5
3
0.5
3
0.5
–
–
Other metallic components
Stainless steel (AISI 303, 304 or 316L)
Silicone MQ/MVQ or FPM/FKM (Viton®)
Epoxy (Araldite® or Stycast®)
without treatment
9)
O-ring and gaskets
–
–
Sealing resin
Notes:
3) for the FGG, FGY and ENY models of the 2B to 4B series
4) for 00 triaxial series (elbow sockets for printed circuits)
5) gold-plating for unipole types
standards for surface treatment are as follows:
– chrome-plated: SAE AMS 2460
– nickel-plated: SAE AMS QQ N 290, or MIL DTL 32119
– gold-plated: ISO 27874
6) used in 00 series free and fixed sockets
7) AISI 416 steel is used with shells made of AISI 303 or 304
– black chrome: MIL-C-14538C with a minimum of 10 µm of lacquer
protection
8) delivered with free and fixed sockets with aluminium alloy or stainless
steel shell
1) for FFP, PCP and ERN models of the 0S to 3S series
2) for FFP, PCP and ERN models of the 0S to 3S series, FGG and ENG
models of the 0B, 1B, 3B and 4B series, FFA and FFC models of the
00 triaxial series
9) FPM/FKM (Viton®) o-ring and gaskets are installed upon special
request. However standard for vacuumtight models.
www.lemo.com
1
®
®
B Series
B series connectors provide the following main features:
– security of the Push-Pull self-latching system
– coaxial, triaxial and mixed contact configurations
– plastic models made of PSU or PPSU
– multiple key options to avoid cross mating
of similar connectors («G» key standard).
– up to 10 coaxial contacts
– solder or crimp contacts
– high packing density for space savings
– 360° screening for full EMC shielding
Metal housing models
Fixed plugs
Straight plugs
Fixed sockets
Free sockets
FGG
FGG
FFG
FNG
FEG
FDG
FIG
FWG
PHG
PHG
EGG
EJG
FAG
ENG
EKG
EHG
EEG
ECG
Elbow plugs
PNG
Fixed sockets
FHG
FKG
PKG
PFG
PEG
Plastic housing models
Straight plugs
Fixed sockets
FGG
FGY
FGG
FGY
ENG
ENY
Model Description
ECG Fixed socket with two nuts, key (G) or keys
(A…L and R) (back panel mounting)
EEG Fixed socket, nut fixing, key (G) or keys
(A…L and R) (back panel mounting)
EGG Fixed socket, nut fixing, key (G)
or keys (A…L and R)
FEG Straight plug, key (G) or keys (A…L), cable
collet, front seal and nut for fitting a bend
relief (IP 54 protection index when mated)
FFG Straight plug, non-latching, key (G)
or keys (A…L), cable collet
FKG Elbow (90°) plug for remote handling,
key (G) or keys (A…L), special alignment
mark, knurled handling surface,
cable collet
FNG Straight plug, key (G) or keys (A…L and R),
cable collet and lanyard release
FWG Fixed plug, nut fixing, key (G) or keys
(A…L)
PEG Fixed socket, nut fixing, key (G) or keys
(A…L), cable collet (back panel mounting)
PFG Fixed socket, with two nuts, key (G)
or keys (A…L and R), cable collet
(back panel mounting)
PHG Free socket, key (G) or keys (A…L and R),
cable collet
PHG Free socket, key (G) or keys (A…L),
cable collet and nut for fitting a bend relief
PKG Fixed socket, nut fixing, key (G)
or keys (A…L and R), cable collet
PNG Free socket, nut fixing, key (G) or keys
(A…L and R), cable collet with lanyard
release
FGG Straight plug, key (G) or keys (A…L and R),
cable collet
EHG Fixed socket, nut fixing, key (G) or keys
(A…L and R), and protruding shell
EJG Fixed socket, press or adhesive fit,
key (G) or keys (A…L)
FGG Straight plug, key (G) or keys (A…L),
cable collet and nut for fitting a bend relief
FGG Straight plug, key (G or J), cable collet,
PEEK outer shell
FGG Straight plug, key (G or J), cable collet,
PEEK outer shell, nut for fitting a bend relief
FGY Straight plug, keys (Y), cable collet
and PSU or PPSU outer shell
FGY Straight plug, keys (Y), cable collet
and PSU or PPSU outer shell and nut
for fitting a bend relief
FHG Elbow (90°) plug, key (G) or keys
(A…L and R), cable collet
FIG Straight plug for remote handling, key (G)
or keys (A…L and R), special alignment
mark, knurled handling surface, cable collet
EKG Fixed socket, nut fixing, key (G) or keys
(A…L and R), special alignment mark
on the front
ENG Fixed socket with earthing tag, nut fixing,
key (G) or keys (A…L)
ENG Fixed socket with earthing tag, nut fixing,
key (G or J), PEEK outer shell
ENY Fixed socket with earthing tag, nut fixing,
keys (Y), PSU or PPSU outer shell
FAG Fixed plug, non-latching, nut fixing,
key (G) or keys (A…L and R)
FDG Straight plug, long version,
key (G) or keys (A…L), cable collet
2
www.lemo.com
®
®
Part Numbering System
Plug
F G G 3 B 8 4 4 C L A D 1 1
1
1
Free socket
P H G 3 B 8 4 4 C L L D 1 1
Cable group
Z = collet nut for bend relief
(page 9)
Variant:
Cable ø max. 1)
Collet type: D or M
Fixed socket
E G G 3 B 8 4 4 C L L
1
Cable group
Contact type:
A = male solder
C = male crimp
L = female solder
M = female crimp
Model
Alignment key: G
Series
Insulator: L = PEEK
Housing:
C = brass chrome-plated
P = PSU
Insert configuration:
multi coax, coax + LV
FGG.3B.844.CLAD111 = straight plug with key (G) and cable collet, 3B series, mixed coax & low voltage type (1 coax and 4 low volt-
age contacts), outer shell in chrome-plated brass, PEEK insulator, male solder contacts, D type collet for up to 11 mm diameter cable.
Cable group 1.
PHG.3B.844.CLLD111 = free socket with key (G) and cable collet, 3B series, mixed coax & low voltage type (1 coax and 4 low voltage
contacts), outer shell in chrome-plated brass, PEEK insulator, female solder contacts, D type collet for up to 11 mm diameter cable.
Cable group 1.
EGG.3B.844.CLL1= fixed socket, nut fixing, with key (G), 3B series, mixed coax & low voltage type (1 coax and 4 low voltage contacts),
outer shell in chrome plated brass, PEEK insulator, female solder contacts. Cable group 1.
Note: 1) see unipole-multipole catalogue.
Part Section Showing Internal Components (mixed coax + LV)
Fixed socket
Straight plug
8
7
6
2
3
4
5
1
1
8
6
5
4
2
7
3
outer shell
1
2
3
4
5
6
7
8
outer shell
1
2
3
4
5
6
7
8
earthing crown
retaining ring
hexagonal nut
locking washer
insulator
latch sleeve
collet nut
split insert carrier
insulator
male contact
collet
female contact
male coaxial contact
female coaxial contact
www.lemo.com
3
®
®
K Series
K series connectors have been specifically designed for outdoor applications.
They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug,
free socket or fixed socket. All models of this series are watertight when mated to give a protection index of IP68 as per
IEC 60529 standard (in mated condition) when correctly assembled to an appropriate cable (IP66 otherwise).
K series connectors have the same insulators as the B series and have the following main features:
– security of the Push-Pull latching system
– coaxial, triaxial and mixed contact configurations
– solder or crimp contacts
– multiple key options to avoid cross mating
of similar connectors («G» key standard)
– watertight connection (IP 68/IP 66)
– up to 10 coaxial contacts
– 360° screening for full EMC shielding
– high packing density for space savings
– rugged housing for extreme working conditions.
Models
Fixed plugs
Straight plugs
Fixed sockets
Free sockets
Fixed sockets
FGG
PHG
PKG
EGG
FXG
FAG
FGG
FGG
PHG
PHG
EEG
EBG
PEG
Elbow plug
FHG
EDG
EHG
Model Description
EBG Fixed socket with square flange,
key (G) or keys (A to F, L and R)
and screw fixing
FGG Straight plug, key (G) or keys
(A to F, L and R), cable collet
PHG Free socket, key (G) or keys (A to F, L and
R), cable collet
FGG Straight plug, key (G) or keys (A to F, L
and R), cable collet and oversize cable
collet
PHG Free socket, key (G) or keys (A to F, L and
R), cable collet and oversize cable collet
PHG Free socket, key (G) or keys (A to F, L and
R), cable collet and nut for fitting a bend
relief
EDG Fixed socket with square flange, key (G)
or keys (A to F, L and R), protruding shell
and earthing tag, screw fixing
FGG Straight plug, key (G) or keys (A to F, L
and R), cable collet and nut for fitting a
bend relief
FHG Elbow (90°) plug, key (G) or keys (A to F,
L and R), cable collet
FXG Fixed plug with round flange, key (G)
or keys (A to F, L and R) and screw fixing
PEG Fixed socket, nut fixing, key (G)
or keys (A to F, L and R), cable collet
(back panel mounting)
EEG Fixed socket, nut fixing, key (G)
or keys (A to F, L and R)
PKG Fixed socket, nut fixing, key (G)
or keys (A to F, L and R), cable collet
(back panel mounting)
EGG Fixed socket, nut fixing, key (G)
or keys (A to F, L and R)
EHG Fixed socket, nut fixing, key (G)
or keys (A to F and L), protruding shell
FAG Fixed plug, nut fixing, non-latching,
key (G) or keys (A to F, L and R)
4
www.lemo.com
®
®
Part Numbering System
Plug
F G G 3 K 8 4 4 C L A C 1 1
3
3
P H G 3 K 8 4 4 C L L C 1 1
Free socket
Cable group
Z = collet nut for bend relief
(page 9)
Variant:
Cable ø max. 1)
Collet type: C or K
Fixed socket
E G G 3 K 8 4 4 C L L
1
Cable group
Contact type:
A = male solder
C = male crimp
L = female solder
M = female crimp
Model
Alignment key: G
Series
Insulator: L = PEEK
Housing:
C = brass chrome-plated
Insert configuration:
multi coax, coax + LV
FGG.3K.844.CLAC113 = straight plug with key (G) and cable collet, 3K series, mixed coax & low voltage type (1 coax and 4 low voltage
contacts), outer shell in chrome-plated brass, PEEK insulator, male solder contacts, C type collet for 10.5 mm diameter cable. Cable
group 3.
PHG.3K.844.CLLC113 = free socket with key (G) and cable collet, 3K series, mixed coax & low voltage type (1 coax and 4 low voltage
contacts), outer shell in chrome-plated brass, PEEK insulator, female solder contacts, C type collet for 10.5 mm diameter cable. Cable
group 3.
EGG.3K.844.CLL1 = fixed socket, nut fixing, with key (G), 3K series, mixed coax & low voltage type (1 coax and 4 low voltage contacts),
outer shell in chrome-plated brass, PEEK insulator, female solder contacts. Cable group 1.
Note: 1) see unipole-multipole catalogue.
Part Section Showing Internal Components (mixed coax + LV)
Straight plug
1
2
outer shell
latch sleeve
inner shell
Fixed socket
3
outer shell
8
2
3
7
6
4
1
9
8
5
2
3
4
7
1
6
13
11 12
10
5
1
2
3
4
5
6
7
8
4
retaining ring
collet nut
earthing crown
retaining ring
hexagonal nut
insulator
5
6
split insert carrier
insulator
7
8
male contact
earthing cone
collet
female contact
o-ring
9
10
11
12
13
female coaxial contact
gasket
washer
male coaxial contact
www.lemo.com
5
®
®
Insert configuration (B and K series)
Mixed: multi coax, coax + LV
Coax
Low voltage (LV)
Coax
Contacts
type
1B
1K
801
1
50
F
F
2
2
1
0.9
l
l
0.85 1.20
10
803
802
804
806
810
841
232
243
803
1
1
1
1
1
2
2
3
1
50
50
50
50
50
50
50
50
50
3
2
4
6
0.9
0.9
0.7
0.7
0.7
1.6
–
l
l
l
l
l
l
l
–
0.75 1.05
0.85 1.20
0.75 1.05
0.75 1.05
0.95 1.35
1.90 2.70
10
10
7
A1 1-2-3
A1 1-2-3
A1 1-2-3
l
2B
2K
lꢀ
lꢀ
lꢀ
lꢀ
–
7
C
E
1-2-3 10
7
2
–
2
6
1
–
–
3
17
–
G
–
–
–
–
E
–
–
–
–
3B
3K
A0
0.9
lꢀ
–
1.10 1.55
1.00 1.50
1.00 1.50
0.80 1.10
0.90 1.30
0.70 1.00
0.90 1.30
0.90 1.30
0.75 1.05
0.70 1.00
8
806
809
812
813
822
844
846
850
856
242
243
862
1
1
1
1
1
2
2
2
2
2
3
3
50
50
50
50
50
50
50
50
50
50
50
50
A1 1-2-3
A1 1-2-3
6
9
0.7
0.7
0.9
0.7
0.7
0.9
0.9
0.7
0.7
–
lꢀ
lꢀ
lꢀ
lꢀ
lꢀ
lꢀ
lꢀ
lꢀ
lꢀ
–
l
l
l
l
l
l
l
l
l
–
7
7
A1 1-2-3 12
A1 1-2-3 13
5
7
C
C
C
C
C
C
C
C
1-2-3 22
5
1-2-3
1-2-3
4
6
10
10
8
1-2-3 10
1-2-3 16
7
1-2-3
1-2-3
1-2-3
–
–
2
–
–
–
–
–
B
R
–
–
–
–
G
0.9
lꢀ
l
1.10 1.60
9
l First choice alternative
Special order alternative
6
www.lemo.com
®
®
Mixed: multi coax, coax + LV
Coax
Low voltage (LV)
Coax
Contacts
type
50
A
A
5-6
802
822
4B
4K
1
1
1
2
2
2
2
2
3
3
4
4
6
6
2
4
6
2
4
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.7
0.7
0.7
–
l
l
l
l
l
l
l
l
l
l
l
–
1.00 1.40
1.00 1.40
1.00 1.40
1.70 2.40
1.70 2.40
0.90 1.30
0.90 1.30
0.80 1.10
0.80 1.10
0.80 1.10
12
10
10
12
10
8
75
4 to 6
A
A
5-6
4 to 6
804
824
50
75
lꢀ
lꢀ
lꢀ
lꢀ
lꢀ
lꢀ
lꢀ
lꢀ
lꢀ
–
806
826
A
A
5-6
4 to 6
50
75
842
844
852
856
858
866
885
244
879
890
894
50
50
50
50
50
50
50
50
50
50
50
A1 1-2-3
A1 1-2-3
C
C
C
C
C
C
C
E
E
1-2-3 12
1-2-3 16
1-2-3 18
8
7
1-2-3
6
7
1-2-3 12
8
1-2-3
1-2-3
2
–
9
–
–
–
0.7
0.7
0.7
lꢀ
lꢀ
lꢀ
l
l
l
0.90 1.30
0.90 1.30
0.90 1.30
8
18
22
5
2
4
5B
5K
1
1
75
50
A4
N/A
5-6
32
40
1.3
0.9
lꢀ
lꢀ
l
l
1.20 1.70
8
7
9971)
A
1.30 1.80
840
l First choice alternative
Special order alternative
Note: 1) only available in 5B series. Solution for triaxial cable fixing.
www.lemo.com
7
®
®
Mixed: multi coax, coax + LV
Coax
Low voltage (LV)
Coax
Contacts
type
5B
5K
868
878
50
B
B
6
4
3.0
0.9
35
6
1
2
lꢀ
lꢀ
lꢀ
l
l
l
0.80 1.15
1.40 2.00
1.40 2.00
75
3-5
44
850
870
50
75
B
B
6
3-5
10
16
0.9
0.9
8
7
50
75
B
B
6
3-5
856
876
2
50
75
B
B
6
3-5
2
15
2.0
0.9
lꢀ
l
lꢀ
l
1.40 2.00
1.40 2.00
30
7
857
877
2
C
1
864
273
2
75
75
75
75
75
50
B0
B1
B1
D
1-6
24
–
1.3
l
–
l
–
0.90 1.30
8
–
–
7
–
–
C
2
3
5
–
–
–
–
–
274
892
4
5
–
–
–
–
6
5-8-9 10
0.9
l
–
l
–
0.70 1.00
260
240
7
D
5-8-9
1-2-3
–
–
–
–
–
–
–
10
C
–
–
–
l First choice alternative
Special order alternative
8
www.lemo.com
®
®
Mixed: coax + LV + HV, coax + LV + Fluidic, coax + LV + Fibre optic
Low volt. High volt. Fibre optic
(LV) (HV) (FO)
Fluidic
(FL)
Coax
Coax
2B
2K
932
1
50 2.0
C
1
2 1) 0.7 1 2) 0.7
–
–
–
–
–
3B
3K
934
970
986
1
1
1
50 2.0
50 2.0
50 2.0
C
C
C
1
1
1
4
0.9
0.7
0.7
1
–
–
0.9
–
–
–
1
–
–
–
1
–
10
16
1.3
–
–
F2
Note: 1) Test voltage LV contact-shell 1.9 (kV rms). 2) Test voltage HV contact-shell 7.5 (kV rms). Total rated current for 2B.932 configuration 6 (A).
Collet nut for fitting a bend relief (B and K series)
D type collets for B series
C type collets for K series
Coax cable groupe
Clamping
Coax cable groupe
Clamping
1
2
3
1
2
3
D52Z
D62Z
D92Z
D10Z
D11Z
D12Z
D51Z
D61Z
D91Z
D01Z
D11Z
D21Z
D52Z
D62Z
D92Z
D02Z
D12Z
D22Z
D53Z
D63Z
D93Z
D03Z
D13Z
D23Z
C50Z
C55Z
C80Z
C85Z
C90Z
C95Z
C10Z
C11Z
C12Z
C13Z
C14Z
C51Z
C56Z
C81Z
C86Z
C91Z
C96Z
C01Z
C11Z
C21Z
C31Z
C41Z
C52Z
C57Z
C82Z
C87Z
C92Z
C97Z
C02Z
C12Z
C22Z
C32Z
C42Z
C53Z
C58Z
C83Z
C88Z
C93Z
C98Z
C03Z
C13Z
C23Z
C33Z
C43Z
B
K
Note: see unipole-multipole catalogue for others available collets.
www.lemo.com
9
®
®
Coaxial contacts for B and K series
Sheath ø
1.05
F 1) 3)
A1
50
50
50
50
50
75
75
50
75
75
75
75
50
50
0.5
0.7
0.6
0.5
1.6
1.3
1.3
0.9
0.6
0.6
0.6
0.5
0.5
1.3
solder
solder
crimp
solder
solder
solder
solder
solder
solder
solder
crimp
solder
solder
solder
crimp
collet
crimp
crimp
collet
collet
collet
crimp
crimp
solder
crimp
crimp
crimp
collet
2
0.35
1.05
–
2.10
0.8
0.9
1.6
0.8
1.8
2.4
2.4
0.8
2.1
2.1
2.1
1.0
0.4
3.0
2
5
+1.83f
1
2
3
0.60
0.60
0.60
1.90
1.90
1.90
2.5
1.7
2.2
3.00
2.10
2.60
1.01
+0.127f
1
2
3
0.50 0.58
0.28 0.35
0.28 0.35
1.65
1.05
1.65
3.00
2.35
3.00
1.04
+0.1f
C1)
–
–
2
1.02
+0.93f
E 1) 3)
2
0.35
0.95
2.00
2
5
6
1.35
1.35
3.95
3.95
4.3
5.3
5.10
6.10
1.01
+0.146f
12
7
A
4
5
6
1.05
1.05
1.05
3.95
3.95
3.95
3.8
4.3
5.3
4.60
5.10
6.10
1.01
+0.19f
1.01
+0.19f
A44)
none
6
1.05
1.05
3.95
3.75
6.7
–
7.60
6.25
6.25
4.25
6.25
7
1.06
+0.156f
11
6
B1)
3
5
0.80
0.80
2.45
3.75
1.00
+0.22f
–
0.75
0.75
2.95
3.75
1.00
+0.22f
1
6
–
6
B0
B11)
D1)
1.00
+0.22f
5
0.55 0.80
3.75
–
6
5
8
9
0.75
0.75
0.75
3.75
2.45
3.00
5.40
3.90
4.90
1.00
+0.38f
–
5
1.01
+0.73f
G3)
1
6
0.35
0.95
1.65
–
–
3.00
4.10
2
1.02
A0
3.3
12
+0.3f 2)
Note:
1) These contacts require specific tools for assembly on the cable, see page 11.
2) Frequency range with SWR ≤ 1.2 = 0 - 1.5 GHz.
3) Coax contact design differs, the central pin is reverse gender.
4) Only available in 5B series. Solution for triaxial cable fixing.
10
www.lemo.com
®
®
Recommended coaxial cables for mixed coax, multi coax for B and K Series
LEMO cable
Part Number
LEMO
cableꢀgroupꢀ
Impedance Conductor
Dielectric
øꢀ(mm)ꢀ
Screen
øꢀ(mm)ꢀ
Sheath
øꢀ(mm)
Type
ꢀ
ꢀ
(Ω)ꢀ
øꢀ(mm)ꢀ
RGꢀ6ꢀA/Uꢀ
7ꢀ
9ꢀ
6ꢀ
5ꢀ
1ꢀ
2ꢀ
3ꢀ
4ꢀ
2ꢀ
1ꢀ
1ꢀ
1ꢀ
75ꢀ±ꢀ3ꢀ
75ꢀ±ꢀ2ꢀ
50ꢀ±ꢀ2ꢀ
75ꢀ±ꢀ3ꢀ
50ꢀ±ꢀ2ꢀ
50ꢀ±ꢀ2ꢀ
75ꢀ±ꢀ3ꢀ
95ꢀ±ꢀ5ꢀ1)ꢀ
75ꢀ±ꢀ3ꢀ
50ꢀ±ꢀ2ꢀ
50ꢀ±ꢀ2ꢀ
50ꢀ±ꢀ2ꢀ
0.73ꢀ
1.17ꢀ
0.90ꢀ
0.60ꢀ
0.48ꢀ
0.30ꢀ
0.30ꢀ
0.30ꢀ
0.30ꢀ
0.54ꢀ
0.30ꢀ
0.60ꢀ
4.70ꢀ
7.25ꢀ
2.95ꢀ
3.70ꢀ
1.50ꢀ
0.84ꢀ
1.50ꢀ
2.60ꢀ
1.50ꢀ
1.50ꢀ
0.84ꢀ
1.60ꢀ
6.20ꢀ
8.15ꢀ
3.60ꢀ
4.50ꢀ
2.00ꢀ
1.30ꢀ
2.00ꢀ
3.10ꢀ
2.00ꢀ
2.00ꢀ
1.30ꢀ
2.10ꢀ
8.45
10.10
5.00
6.20
2.80
1.80
2.50
3.60
2.60
2.60
1.95
2.80
311 100 LEDE
RGꢀ11ꢀA/Uꢀ
RGꢀ58ꢀC/Uꢀ
RGꢀ59ꢀB/Uꢀ
RGꢀ174ꢀA/Uꢀ
RGꢀ178ꢀB/Uꢀ
RGꢀ179ꢀB/Uꢀ
RGꢀ180ꢀB/Uꢀ
RGꢀ187ꢀA/Uꢀ
RGꢀ188ꢀA/Uꢀ
RGꢀ196ꢀA/Uꢀ
RGꢀ316ꢀ/Uꢀ
CCX.50.RG5.8CU50N
CCX.50.RG5.9BU62N
CCX.50.RG1.74AU27N
CCX.50.RG1.78BU18M
CCX.75.RG1.79BU26M
CCX.75.RG1.87AU26B
CCX.50.RG1.88AU26B
CCX.50.RG1.96AU20B
CCX.50.RG3.16U26M
Note: 1)ꢀwhenꢀnoꢀdefinedꢀimpedanceꢀisꢀrequired.
Theꢀcableꢀgroupꢀnumberꢀcorrespondingꢀtoꢀtheꢀchosenꢀcableꢀmustꢀbeꢀwrittenꢀinꢀtheꢀvariantꢀposition,ꢀseeꢀpagesꢀ3ꢀandꢀ5.
Tooling for coaxial contacts of B and K series
Reference
ꢀ
ꢀ
Coaxialꢀ
contactꢀtypeꢀ
Imp.ꢀ
Ωꢀ
Cable
group
Spanner for
tightening the contact
Crimping tool with die
Extractor
F
C1)
E
50
50
50
50
50
75
75
75
75
75
75
2
1-3
2
DPE.99.025.45K
DPE.99.103.8K
DPE.99.103.1K
DPE.99.002.5K
DPE.99.176.2K
DPE.99.125.2K
DPE.99.127.0K
DPE.99.127.0K
DPE.99.006.2K
DPE.99.005.2K
DPE.99.005.5K
DCC.91.019.1AK
–
–
DCC.91.384.5LA
–
DCC.91.384.5LA
2
DCC.91.050.2LA
–
6
–
DCC.91.804.5LA
B
B1
D
3
–
DCC.91.804.5LA
5
–
DCC.91.804.5LA
5
–
DCC.91.808.0LC
5
DCB.91.685.8TN
DCB.91.685.8TN
DCB.91.685.8TN
–
–
–
8
9
Note: 1)ꢀforꢀtheꢀ3B.243/3K.243ꢀandꢀ3B.862/3K.862ꢀtheꢀextractorꢀisꢀpartꢀnumberꢀDCC.91.393.4LT.
www.lemo.com
11
®
®
00.650 Series
The 00 Series are available in triax configuration, allowing a very compact solution for triaxial cables.
These connectors are designed for small diameter ranging from 1.1 to 3.5 mm.
Either twinax (2 shielded connectors) or triax (1 conductor and 2 concentric separate screens) can be used with the 00 Series.
The 00 Series with a 650 configuration insert are mostly used in audio-video applications where a large density of connection
is required.
LEMO 00 Series connectors offer customers many benefits including:
– self-latching push-pull system
– aesthetically pleasing appearance
– small size
– ease of use
– low weight
– reliable performances
– wide choice to suit application
– high packing density
– rugged construction.
Metal housing models
Elbow plug
Straight plugs
Fixed and free sockets
Free socket
FLA
FFC
PCA
ERN
ECP
ERX
ERC
ELF
EPA
Elbow socket
Fixed socket
FFC
FFY
FAA
FAR
EPL
PSA
Plastic housing model
Threaded latching models
Straight plug
Straight plug
Fixed socket
FFC
FVN
ELF
Model Description
ECP Fixed socket with 2 round nuts
ERN Fixed socket with nut fixing and tags
ERX Fixed socket with nut fixing,
slots on flange and tags
FFC Straight plug with flats on latch sleeve and
cable collet, black POM (Delrin® outershell)
FFY Straight plug, large shell with cable collet
FLA Elbow socket (90°) with cable collet
FVN Straight plug with cable collet,
(back panel mounting)
ELF Fixed socket, nut fixing, threaded shell
with tag (back panel mounting)
FAA Straight plug non latching with nut
FAR Straight plug non latching with 2 nuts
(back panel mounting)
ELF Fixed socket, nut fixing, threaded shell
with tag, black chromium-plated outer shell
(back panel mounting)
black chromium-plated outer shell
FFC Straight plug with flats on latch sleeve
and cable collet
FFC Straight plug with flats on latch sleeve
and cable collet and nut for fitting
a bend relief
PCA Free socket with cable collet
PSA Fixed socket, nut fixing, cable collet
EPA Straight socket for printed circuit board
EPL Elbow plug (90°) for printed circuit board
ERC Fixed socket, with thread, with slots
in flange
Part Section Showing Internal Components
Straight plug
Fixed socket
4
3
7
6
3
4
5
2
1
1
7
6
2
5
8
1
2
3
4
5
6
7
8
outer shell
1
2
3
4
5
6
7
outer shell
latch sleeve
collet nut
earthing crown
retaining ring
hexagonal nut
locking washer
insulator
earthing sleeve
rear insulator
insulator
male triaxial contact
collet
female triaxial contact
12
www.lemo.com
®
®
Part Numbering System
Plug
F F C 0 0 6 5 0 C L A C 2 7
P C A 0 0 6 5 0 C L L C 2 7
Free socket
Z
Variant
Cable ø max.:
from 1.1 to 3.5 mm
Collet type:
C = with cable collet clamping
Contact type:
A = male solder
L = female solder
E R N 0 0 6 5 0 C L L
Fixed socket
Model
Series: 00
Variant
Insert configuration:
650 = triaxial (50 Ω)
Contact type:
A = male solder
D = male print
L = female solder
N = female print
Housing :
N = brass nickel-plated 3)
C = brass chrome-plated 3) 1)
K = brass black chrome 1)
B = black POM 2)
Insulator: L = PEEK
G = PEEK (natural)
FFC.00.650.CLAC27 = straight plug with flats on latch sleeve and cable collet, 00 Series, triaxial (50 Ω), outer shell in chrome-plated
brass, PEEK insulator, C type collet for an up to 2.6 mm diameter cable.
PCA.00.650.CLLC27Z = free socket with cable collet, 00 Series, triaxial (50 Ω), outer shell in chrome-plated brass, PEEK insulator, C
type collet for an up to 2.6 mm diameter cable and nut for fitting a bend relief.
ERN.00.650.CLL = fixed socket with nut fixing and tags, 00 Series, triaxial (50 Ω), outer shell in chrome-plated brass, PEEK insulator.
Note: 1) treatment not available for the printed circuit models. 2) available for the FFC model only. 3) standard.
Insert configuration
Series
1.02
+0.9f
1)
650
00
–
50
0.5
0.55 2.9 3.5
0.6
4
Note: 1) 00.650 is designed for use with 2 conductors screened cable (twinax).
www.lemo.com
13
®
®
S Series
S series connectors have main features as follows:
– security of the Push-Pull self-latching system
– solder contacts, print contacts only for coaxial
and triaxial configurations
– coaxial, triaxial and mixed contact configurations
– polarisation by stepped insert (half-moon)
– up to 8 coaxial contacts
– 360° screening for full EMC shielding.
Metal housing models
Straight plug
Straight plugs
Fixed sockets
Free sockets
Fixed sockets
FZP
EBS
FFA, FFP
FFA
PSA, PSP
PSS
ERA
ERN
PCA, PCP
PCA
Fixed plug
EBC
FAA
Straight plug
with resistor
FFA, FFP
FFB
ERD
ECP
ERC
EHP
PCA
Elbow plug
with socket
Free coupler
FRT
Elbow plugs
RMA
FTR
FFE
FFF
Fixed coupler
JLM
FLC
EBD
RAD
FLS
FFS
Plastic housing models
Watertight or vacuumtight models
Straight plugs
Fixed socket
Fixed sockets
Fixed coupler
FFP
FFA, FFP
FFL
HGP
EWB
HGW
ERN
SWH
HCP
Model Description
EBC Fixed socket with square flange,
protruding shell and screw fixing
PEEK or POM outer shell
cable collet and inner anti-rotating device
HCP Fixed socket, nut fixing, watertight
or vacuumtight (back panel mounting)
HGP Fixed socket, nut fixing, watertight
or vacuumtight
FFB Straight plug, cable collet
EBD Fixed socket with square flange, screw
fixing
and safety locking ring
FFE Straight plug, cable collet, front seal
and nut for fitting a bend relief
EBS Fixed socket with round flange, screw fixing
ECP Fixed socket with two nuts, long threaded
shell (back panel mounting)
(protected to IP54 when mated)
FFF Straight plug, non-latching,
cable collet
HGW Fixed socket, nut fixing, with back washer,
watertight or vacuumtight
EHP Fixed socket, nut fixing, protruding shell
ERA Fixed socket, nut fixing
JLM Elbow (90°) plug, cable collet
PCA Free socket, cable collet
FFP Straight plug, cable collet
ERC Fixed socket, nut fixing, slot in the flange
ERD Fixed socket with two nuts
and inner anti-rotating device
PCA Free socket with oversize cable collet
PCA Free socket, cable collet and nut for fitting
a bend relief
FFP Straight plug, cable collet, PEEK or POM
outer shell and inner anti-rotating device
FFP Straight plug, cable collet, PEEK or POM
outer shell, inner anti-rotating device
and nut for fitting a bend relief
(back panel mounting)
ERN Fixed socket, nut fixing, with earthing tag
ERN Fixed socket, nut fixing, with earthing tag,
PEEK or POM outer shell
PCP Free socket, cable collet and inner
anti-rotating device
PSA Fixed socket, nut fixing, cable collet
PSP Fixed socket, nut fixing, cable collet
and inner anti-rotating device
EWB Fixed socket, nut fixing, with two flats
on the flange, watertight or vacuumtight
FAA Fixed plug non-latching, nut fixing
FFA Straight plug, cable collet
FFS Straight plug for cable crimping
FLC Elbow (90°) plug, cable collet
FLC Elbow (90°) plug, cable collet
and nut for fitting a bend relief
FLS Elbow (90°) plug for cable crimping
FRT Straight plug with resistor
FTR Elbow (90°) plug with socket
FZP Straight plug for remote handling,
PSS Free socket, nut fixing for cable crimping
RAD Fixed coupler, nut fixing
FFA Straight plug with oversize cable collet
FFA Straight plug, cable collet
RMA Free coupler
SWH Fixed coupler, nut fixing, watertight
or vacuumtight
and nut for fitting a bend relief
FFA Straight plug, cable collet,
14
www.lemo.com
®
®
Part Numbering System
F F A 1 S 2 5 0 C T A C 4 2
P C A 1 S 2 5 0 C T L C 4 2 Z
Plug
Free socket
Variant: 1) (page 27)
Cable ø max. 2)
Collet type: C, K or L
Fixed socket
E R A 1 S 2 5 0 C T L
Variant 1)
Contact type:
A = male solder
C = male crimp
L = female solder
M = female crimp
Insulator:
L = PEEK
T = PTFE
Model
Series
Housing:
Insert configuration:
coaxial, triaxial,
multi coax, coax + LV
C = brass chrome-plated
N = brass nickel-plated
B = POM (black)
FFA.1S.250.CTAC42 = straight plug with cable collet, 1S series, coaxial (50 Ω), outer shell in chrome-plated brass, PTFE insulator, male
solder contact, C type collet for a 4.2 mm diameter cable.
PCA.1S.250.CTLC42Z = free socket with cable collet, 1S series, coaxial (50 Ω), outer shell in chrome-plated brass, PTFE insulator,
female solder contact, C type collet for a 4.2 mm diameter cable and nut for fitting a bend relief.
ERA.1S.250.CTL = fixed socket, nut fixing, 1S series, coaxial (50 Ω), outer shell in chrome-plated brass, PTFE insulator, female solder
contact.
Note: 1) for mixed contacts, add cable group to the part number.
2) see unipole-multipole catalogue.
Part Section Showing Internal Components (mixed coax + LV)
Fixed socket
Straight plug
8
7
6
2
3
4
5
1
1
6
5
4
2
7
3
outer shell
1
2
3
4
5
6
7
8
outer shell
latch sleeve
collet nut
1
2
3
4
5
6
7
earthing crown
retaining ring
hexagonal nut
locking washer
insulator
centre-piece
insulator
female coaxial contact
collet
male coaxial contact
female contact
www.lemo.com
15
®
®
E Series
E series connectors have been specifically designed for outdoor applications.
They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug,
free socket or fixed socket. All models of these series are watertight when mated and give a protection index of IP 68 as
per IEC 60529 standard (in mated condition) when correctly assembled to an appropriate cable (IP 66 otherwise).
– security of the Push-Pull latching system
– watertight connection (IP 68/IP 66)
– solder contacts, print contacts only
for coaxial and triaxial configurations
– coaxial, triaxial and mixed contact configurations
– polarization by stepped insert (half-moon)
– 360° screening for full EMC shielding
– rugged housing for extreme working condition.
Models
Straight plug
Straight plugs
Fixed sockets
Free sockets
FZP
FFA
FFA
FFA
FFF
PCA
PCA
ERA
ERB
Fixed plug
FAA
Elbow plug
PCA
EEP
EHP
Fixed socket
FLA
PSA
Watertight or vacuumtight models
Fixed sockets
Fixed coupler
Free coupler
RMA
EBR
HGP
SWH
Model Description
EBR Fixed socket with round flange, watertight, FFA Straight plug with oversize cable collet
PCA Free socket with oversize cable collet
PCA Free socket, cable collet
and nut for fitting a bend relief
PSA Fixed socket, nut fixing, cable collet
RMA Free coupler
SWH Fixed coupler, nut fixing, watertight
or vacuumtight
protruding shell and screw fixing
EEP Fixed socket, nut fixing (back panel moun-
ting)
FFA Straight plug, cable collet
and nut for fitting a bend relief
FFF Straight plug non-latching, cable collet
FLA Elbow (90°) plug, cable collet
FZP Straight plug for remote handling,
cable collet and inner anti-rotating device
HGP Fixed socket, nut fixing,
EHP Fixed socket, nut fixing, protruding shell
ERA Fixed socket, nut fixing
ERB Fixed socket, nut fixing with two flats
in the flange
FAA Fixed plug non-latching, nut fixing
FFA Straight plug, cable collet
watertight or vacuumtight
PCA Free socket, cable collet
16
www.lemo.com
®
®
Part Numbering System
F F A 1 E 2 5 0 C T A C 5 0
P C A 1 E 2 5 0 C T L C 5 0
Plug
Free socket
Z
Variant: 1) (page 27)
Cable ø max. 2)
Collet type: C or K
Fixed socket
E R A 1 E 2 5 0 C T L
Variant 1)
Contact type:
A = male solder
L = female solder
Insulator:
L = PEEK
T = PTFE
Model
Series
Housing:
C = brass chrome-plated
K = brass black chrome
T = stainless steel
Insert configuration:
coaxial, triaxial,
multi coax, coax + LV
FFA.1E.250.CTAC50 = straight plug with cable collet, 1E series, coaxial (50 Ω), outer shell in chrome-plated brass, PTFE insulator, C type
collet for an up to 5.0 mm diameter cable.
PCA.1E.250.CTLC50Z = free socket with cable collet, 1E series, coaxial (50 Ω), outer shell in chrome-plated brass, PTFE insulator, C type
collet for an up to 5.0 mm diameter cable and collet nut for fitting a bend relief.
ERA.1E.250.CTL = fixed socket, nut fixing, 1E series, coaxial (50 Ω), outer shell in chrome-plated brass, PTFE insulator.
Note: 1) for mixed contacts, add cable group to the part number.
2) see unipole-multipole catalogue.
Part Section Showing Internal Components (mixed coax + LV)
Straight plug
Fixed socket
outer shell
latch sleeve
inner shell
retaining ring
collet nut
centre-piece
insulator
1
2
3
4
5
6
7
8
9
8
2
3
7
6
1
4
9
11 12 10
5
7
6
5
2
3
4
8
1
outer shell
1
2
3
4
5
earthing crown
retaining ring
hexagonal nut
insulator
6 male coaxial contact
7 female contact
female coaxial contact
earthing cone
8
o-ring
10 collet
11
12
gasket
washer
www.lemo.com
17
®
®
Insert configuration (S and E series)
Coaxial
Series
Sheath ø
1.09
2501)
250
00
–
50
50
0.7 1 to 9 1.05 3.05
1-2
5.5
2.1
3.0
4
6
00
+0.11f
0S
0E
1.02
+0.25f
0S
0E
0.9
0.95 2.95 6.7 5.0
3-4
1.01
1S
1E
1-2
3-4
250
275
1S
1S
1E
1E
50
75
1.6
1.35 3.95 8.5 8.5
3.0
2.4
12
10
+0.23f
1.02
+0.08f
1.3 5-6-7 1.05 3.95 8.5 8.5
2.0 6-7 1.75 5.95 10.5 10.5
2S
2E
1.01
+0.95f
250
275
2S
2S
2E
2E
50
75
3.0
1.5
15
12
1.02
+0.03f
1.6 6-7 1.35 5.95 10.5 10.5
3S
3E
1.06
250
275
3S
3S
3E
3E
50
75
3.0
2.0
8
8
2.65 8.15 13.0 15.0
1.75 8.15 13.0 15.0
3.0
2.7
26
15
+0.5f
1.04
+0.05f
4S
4E
1.01
250
275
4S
4S
4E
4E
50
75
4.0 8-9 3.65 10.05 22.0 23.5
3.0 8-9-0 2.65 10.05 22.0 23.5
2.1
1.8
36
26
+1.9f
1.01
+0.12f
5S
1.02
+2.3f
250
5S
–
50
5.0
9
5.15 17.45 30.0 30.0
3.0
45
Note: 1) see NIM-CAMAC catalogue.
18
www.lemo.com
®
®
Triaxial
Series
Sheath ø
0S
0E
1.03
+0.34f
650
0S
0E
50
0.9 1-2 0.75 2.95 6.7 5.0
1.0
6
1S
1E
1.01
650
650
675
1S
2S
2S
1E
2E
2E
50
50
75
0.9 1-2-3 0.75 3.95 8.5 8.5
1.6 2-3-4 1.35 5.95 10.5 10.5
0.9 4-6 0.75 5.95 10.5 10.5
1.0
1.5
1.5
6
12
6
+0.17f
2S
2E
1.01
+0.3f
1.01
+0.07f
3S
3E
1.01
650
675
3S
3S
3E
3E
50
75
2.0 3-4-5 1.75 8.45 13.0 15.0
0.9 4-5 0.75 8.45 13.0 15.0
2.4
1.8
15
6
+0.27f
1.01
+0.05f
4S
4E
1.01
650
675
4S
4S
4E
4E
50
75
3.0 4-5 2.65 10.05 22.0 23.5
2.0 4-5-7 2.25 10.05 22.0 23.5
2.7
2.2
26
15
+0.38f
1.01
+0.14f
www.lemo.com
19
®
®
Mixed: coax + LV, multi coax
Series
Coaxial
Low voltage
Coax
3S
3E
801
802
803
804
805
806
807
3S
3E
3E
3E
3E
3E
3E
3E
1
1
1
1
1
1
1
50
50
50
50
50
50
50
5
5
5
5
5
5
5
A1 1-2-3
A1 1-2-3
A1 1-2-3
A1 1-2-3
A1 1-2-3
A1 1-2-3
A1 1-2-3
1
2
3
4
5
6
7
1.3 2.7 3.9
1.3 1.2 1.8
1.3 2.7 3.9
1.3 1.2 1.8
0.9 1.8 2.4
0.9 0.8 1.2
0.9 0.8 1.2
14
14
14
10
8
3S
3S
3S
3S
3S
3S
8
7
4S
4E
4S
4S
4S
4S
4S
4S
4S
4S
4S
4S
4S
4E
4E
4E
4E
4E
4E
4E
4E
4E
4E
4E
1
1
1
1
1
1
1
1
1
2
2
50
50
50
50
50
50
50
50
50
50
50
5
5
5
5
5
5
5
5
5
5
5
A1 1-2-3
A1 1-2-3
A1 1-2-3
A1 1-2-3
A1 1-2-3
A1 1-2-3
A1 1-2-3
2
3
4
5
6
7
9
3.0 2.1 3.0
2.0 2.1 3.0
1.3 2.7 3.9
1.3 2.1 3.0
1.3 2.1 3.0
1.3 2.1 3.0
0.9 2.1 3.0
0.9 2.1 3.0
0.9 2.1 3.0
21
16
13
11
9
802
803
804
805
806
807
809
810
812
202
832
8
7
A1 1-2-3 10
A1 1-2-3 12
7
7
A1 1-2-3
A1 1-2-3
–
2
–
–
–
–
1.3 2.1 3.0
13
20
www.lemo.com
®
®
Mixed: coax + LV, multi coax
Series
Coaxial
Low voltage
Coax
4S
4E
4S
4E
4E
4E
4E
2
2
2
2
50
50
50
50
5
5
5
5
A1 1-2-3
A1 1-2-3
A1 1-2-3
4
6
8
1.3 2.1 3.0
0.9 1.8 2.4
0.9 1.8 2.4
0.9 1.8 2.4
13
7
834
836
838
842
4S
4S
4S
7
A1 1-2-3 12
7
5S
5E
–
5E
–
1
1
1
1
2
2
2
50
50
75
50
50
12
6
A
4-6
3
4
4
3.0 3.0 4.2
3.0 2.1 3.0
3.0 2.1 3.0
1.6 1.8 2.4
25
22
22
11
–
803
804
804
810
232
5S
–
A0 1-3-4
5E
5E
–
7
A
3-4-5
5S
5S
5S
5S
5
A1 1-2-3 10
6
A0 1-3-4
–
–
2
–
–
–
–
–
–
50
75
12
7
4-6
A
282
292
5E
5E
–
3-4-5
50
6
A0 1-3-4
2.0 2.1 3.0
18
832
www.lemo.com
21
®
®
Mixed: coax + LV, multi coax
Series
Coaxial
Low voltage
Coax
5S
5E
5S
5E
–
2
2
2
2
2
2
4
4
50
50
50
75
50
50
50
50
6
6
6
7
6
6
5
5
A0 1-3-4
A0 1-3-4
4
8
2.0 2.1 3.0
1.6 1.8 2.4
1.3 1.8 2.4
1.3 0.8 1.2
1.3 0.8 1.2
1.3 0.8 1.2
18
12
9
834
838
842
846
850
854
234
876
5S
5S
–
5E
5E
–
A0 1-3-4 12
A
3-4-5 16
8
5S
5S
5S
5S
A0 1-3-4 20
A0 1-3-4 24
7
–
6
5E
5E
A1 1-2-3
A1 1-2-3
–
6
–
–
–
–
1.3 0.8 1.2
6
22
www.lemo.com
®
®
Mixed: coax + LV, multi coax
Coaxial
Low voltage
Coax
6S
826
830
858
859
866
867
883
1
1
2
2
3
3
4
75
75
75
50
50
75
50
7
7
7
5
6
7
4
A
A
A
3-4-5 26
2.0 1.5 2.1
7
4
30
3.0 1.5 2.1
1.6 1.5 2.1
14
5
3-4-5
6
1.3 1.2 1.8
1.6 1.2 1.8
2.0 1.2 1.8
1.9 1.2 1.8
4
5
10
2
6
3-4-5
5
17
36
4
1.3 1.2 1.8
3.0 1.2 1.8
4
14
A1 1-2-3
A0 1-3-4 26
2.0 1.5 2.1
7
49
2
0.9 1.2 1.8
1.6 1.2 1.8
2
5
A
3-4-5
A1 1-2-3 30
1.6 1.5 2.1
5
www.lemo.com
23
®
®
Mixed: coax + LV, multi coax
Coaxial
Low voltage
Coax
6S
50
75
12
7
4-6
284
294
4
4
A
A
–
–
–
–
–
2
3-4-5
882
887
890
893
238
899
75
7
3-4-5 26
0.9 0.8 1.2
2.0 1.5 2.1
4.0 1.5 2.1
1.6 1.5 2.1
1
4
50
50
26
5
A3
A1
7
9
7
4
10
16
5
}
3
6
6
8
8
50
50
50
50
5
5
6
5
A1 1-2-3
A1 1-2-3 20
A0 1-3-4
–
–
–
–
–
A1 1-2-3 20
1.6 1.5 2.1
5
24
www.lemo.com
®
®
Mixed: coax + LV, multi coax
Coaxial
Low voltage
Coax
6E
8051)
831
843
847
856
857
865
1
1
2
2
2
2
3
75
75
75
50
75
75
75
7
7
7
5
7
7
7
A
A
A
3-4-5
3-4-5
3-4-5
5
2.0 1.5 2.1
10
24
12
0.9 0.8 1.2
2.0 1.5 2.1
2
10
12
1
2.0 1.5 2.1
3.0 1.5 2.1
10
14
A1 1-2-3 17
2.0 1.5 2.1
2.0 1.5 2.1
1.3 1.2 1.8
10
A
A
A
3-4-5 26
7
3-4-5 33
4
21
4
1.3 1.2 1.8
2.0 1.2 1.8
4
10
3-4-5
Note: 1) The type 6E.805 is delivered with female contacts in the plug.
www.lemo.com
25
®
®
Mixed: coax + LV, multi coax
Coaxial
Low voltage
Coax
6E
866
880
882
884
235
899
3
4
4
4
5
8
75
50
75
75
50
50
7
5
7
7
6
5
A
3-4-5 26
1.3 1.2 1.8
1.3 1.2 1.8
0.9 0.8 1.2
0.9 0.8 1.2
4
4
2
2
–
5
A1 1-2-3 20
A
A
3-4-5 20
3-4-5 38
A0 1-3-4
–
–
–
–
A1 1-2-3 20
1.6 1.5 2.1
26
www.lemo.com
®
®
Mixed: coax + LV + HV
Low voltage High voltage
(LV) (HV)
Coax
Coax
4S
4E
1
50
5
A1 1-2-3
4
0.9
1
2.0
934
Collet nut for fitting a bend relief (S and E series)
C type collets for S series
C type collets for E series
Coax cable groupe
Clamping
Coax cable groupe
Clamping
1
2
3
1
2
3
C42Z
C57Z
C72Z
C87Z
C97Z
C11Z
C12Z
C41Z
C51Z
C71Z
C81Z
C91Z
C11Z
C21Z
C42Z
C52Z
C72Z
C82Z
C92Z
C12Z
C22Z
C43Z
C53Z
C73Z
C83Z
C93Z
C13Z
C23Z
C50Z
C55Z
C80Z
C85Z
C90Z
C95Z
C10Z
C11Z
C12Z
C13Z
C14Z
C51Z
C56Z
C81Z
C86Z
C91Z
C96Z
C01Z
C11Z
C21Z
C31Z
C41Z
C52Z
C57Z
C82Z
C87Z
C92Z
C97Z
C02Z
C12Z
C22Z
C32Z
C42Z
C53Z
C58Z
C83Z
C88Z
C93Z
C98Z
C03Z
C13Z
C23Z
C33Z
C43Z
S
E
Note: see unipole-multipole catalogue for others available collets.
www.lemo.com
27
®
®
Coaxial contacts for S and E series
Sheath ø
1
ꢀ
3
0.55
0.55
0.55
1.90
1.90
1.90
ꢀ.5
3.0
ꢀ.1
ꢀ.6
1.01
A1
A0
50
50
50
75
50
0.7
0.9
1.6
1.3
3.0
solder
solder
solder
solder
solder
collet
collet
collet
collet
collet
1.7
ꢀ.ꢀ
0.9
3.0
1.8
ꢀ.4
3.0
5
6
+0.1ꢀ7f
1
3
4
0.95
0.95
0.95
ꢀ.95
ꢀ.95
ꢀ.95
1.7
ꢀ.7
3.3
ꢀ.1
3.1
4.1
1.06
+0.1f
1.01
+0.146f
4
6
1.35
1.35
3.95
3.95
3.3
4.3
4.1
5.1
1ꢀ
7
A
3
4
5
1.05
1.05
1.05
3.95
3.95
3.95
ꢀ.ꢀ
3.3
5.3
ꢀ.6
4.1
6.1
1.01
+0.19f
1.06
+0.5f
A3
7
ꢀ.60
8.10
10.0
10.6
15
Recommended coaxial cables for 00 Series (page 18)
LEMO
cable
group
LEMO cable
Part Number
Impedance Conductor
Dielectric
ø (mm)
Screen
ø (mm)
Sheath
ø (mm)
Type
(Ω)
ø (mm)
CCX.50.RG5.8CU50N
CCX.50.RG1.42BU50M
CCX.50.RG1.74U25N
CCX.50.RG1.74AU27N
CCX.50.RG1.78BU18M
CCX.75.RG1.79BU26M
CCX.75.RG1.87AU26B
CCX.50.RG1.88AU24B
CCX.95.RG1.95AU37B
CCX.50.RG1.96AU20B
CCX.50.RG3.16U26M
RG 58 C/U
RG 14ꢀ B/U
RG 174 /U
6
7
3
3
1
ꢀ
ꢀ
4
5
1
4
8
9
8
50
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
3
3
ꢀ
5
ꢀ
ꢀ
ꢀ
5
ꢀ
0.90
0.95
0.48
0.48
0.30
0.30
0.30
0.54
0.30
0.30
0.54
0.50
0.19
0.50
ꢀ.95
ꢀ.95
1.50
1.50
0.84
1.50
1.50
1.50
ꢀ.5ꢀ
0.84
1.50
1.50
0.5ꢀ
1.5ꢀ
3.60
3.53 / 4.30
ꢀ.00
5.00
5.00
ꢀ.55
ꢀ.80
1.80
ꢀ.50
ꢀ.60
ꢀ.60
3.70
1.95
ꢀ.60
3.10
1.ꢀ5
3.05
50
50
50
50
75
75
50
95
50
50
50
50
50
RG 174 A/U
RG 178 B/U
RG 179 B/U
RG 187 A/U
RG 188 A/U
RG 195 A/U
RG 196 A/U
RG 316 /U
ꢀ.00
1.30
ꢀ.00
ꢀ.00
ꢀ.00
3.10
1.30
ꢀ.10
Huber+Suhner, G0ꢀꢀ3ꢀD-60
Huber+Suhner, K0115ꢀ-07
Storm, 4ꢀ1-099
1.95 / ꢀ.40
0.90
ꢀ.00 / ꢀ.50
Note: for more details on cable properties, see NIM-CAMAC catalogue.
28
www.lemo.com
®
®
Recommended triaxial cables for 00 Series (page 13)
LEMO cable
Part Number
Impedance Conductor
Dielectric
ø (mm)
Screen 1
ø (mm)
Screen 2
ø (mm)
Sheath
ø (mm)
Type
(Ω)
ø (mm)
RGT 316
RGT 403
RGT 174
RGT 178
50
2
2
2
2
2
2
0.51
0.30
0.48
0.30
0.49
0.16
1.50
0.84
1.55
0.90
1.50
0.52
2.05
1.30
1.90
1.37
2.00
0.85
3.15
2.35
2.90
2.30
3.05
1.35
3.60
2.95
3.90
2.80
4.25
1.60
50
50
50
50
50
017 410 LEDE
017 820 LEDE
Huber + Suhner G 02332
SMT 50
Recommended coaxial cables for S and E Series (page 18)
LEMO cable
Part Number
LEMO
cable group
Impedance Conductor
Dielectric
ø (mm)
Screen
ø (mm)
Sheath
ø (mm)
Type
(Ω)
ø (mm)
RG 11 A/U
8
0
6
7
8
4
6
8
8
3
1
5
5
2
1
8
9
9
7
9
6
2
6
3
7
6
75
2
3
2
3
2
2
2
3
2
2
2
3
3
2
2
2
2
3
2
2
3
2
2
2
3
2
1.17
1.20
0.90
0.60
2.25
0.80
0.95
1.35
2.46
0.48
0.30
0.30
0.30
0.54
0.30
2.25
2.25
1.20
0.89
2.40
0.64
0.60
1.00
0.48
0.60
0.40
7.25
7.25
2.95
3.70
6.50
2.50
2.95
7.25
7.25
1.50
0.84
1.50
1.50
1.50
0.84
7.25
7.25
7.25
2.95
7.25
3.70
1.60
2.98
1.30
3.80
2.50
8.15
8.20
3.60
4.50
8.00
3.20
4.30
8.00
8.00
2.00
1.30
2.00
2.00
2.00
1.30
8.20
8.80
8.80
4.30
8.80
4.40
2.10
4.20
1.90
10.10
11.80
5.00
6.20
10.50
4.10
5.00
10.40
10.40
2.80
1.80
2.50
2.60
2.60
1.95
10.30
10.80
10.80
5.40
10.90
5.10
2.80
5.00
2.70
5.60
4.50
311 100 LEDE
RG 12 A/U
75
50
75
50
50
50
75
50
50
50
75
75
50
50
50
50
75
50
50
75
50
50
50
75
75
RG 58 C/U
CCX.50.RG5.8CU50N
CCX.50.RG5.9BU62N
RG 59 B/U
RG 115 A/U
RG 122 /U
RG 142 B/U
RG 144 /U
CCX.50.RG1.42BU50M
RG 165 /U
RG 174 A/U
RG 178 B/U
RG 179 B/U
RG 187 A/U
RG 188 A/U
RG 196 A/U
RG 213 /U
CCX.50.RG1.74AU27N
CCX.50.RG1.78BU18M
CCX.75.RG1.79BU26M
CCX.75.RG1.87AU26M
CCX.50.RG1.88AU26B
CCX.50.RG1.96AU20B
213 000 LEDE
RG 214 /U
RG 216 /U
RG 223 /U
RG 225 /U
RG 302 /U
RG 316 B/U
RG 400 /U
CCX.50.RG3.16U26M
HF-2114 Dätwyler
HF-5408/1 Dätwyler
2YCCY 0.4/2.5 Siemens
3.70
www.lemo.com
29
®
®
Recommended coaxial cables for mixed coax, multi coax for S and E Series (pages 20 to 27)
LEMO cable
Part Number
LEMO
cable group
Impedance Conductor
Dielectric
ø (mm)
Screen
ø (mm)
Sheath
ø (mm)
Type
(Ω)
ø (mm)
CCX.50.RG5.8CU50N
RG 58 C/U
6
5
4
6
1
2
3
3
1
2
7
6
5
1
5
50
2
3
2
2
2
2
3
3
2
2
2
2
3
2
2
0.90
0.60
0.80
0.95
0.48
0.30
0.30
0.30
0.54
0.30
2.25
0.89
0.64
0.54
1.00
2.95
3.70
2.50
2.95
1.50
0.84
1.50
1.50
1.50
0.84
7.25
2.95
3.70
1.50
2.98
3.60
4.50
3.20
4.30
2.00
1.30
2.00
2.00
2.00
1.30
8.20
4.30
4.40
2.10
4.20
5.00
6.20
4.10
5.00
2.80
1.80
2.50
2.60
2.60
1.95
10.30
5.40
5.10
2.60
5.00
CCX.50.RG5.9BU62N
RG 59 B/U
RG 122 /U
RG 142 B/U
RG 174 A/U
RG 178 B/U
RG 179 B/U
RG 187 A/U
RG 188 A/U
RG 196 A/U
RG 213 /U
RG 223 /U
RG 302 /U
RG 316 /U
RG 400 /U
75
50
50
50
50
75
75
50
50
50
50
75
50
50
CCX.50.RG1.42BU50M
CCX.50.RG1.74.AU27N
CCX.50.RG1.78BU18M
CCX.75.RG1.79BU26M
CCX.75.RG1.87AU26M
CCX.50.RG1.88AU26B
CCX.50.RG1.96AU20B
213 000 LEDE
CCX.50.RG3.16U26M
Note: the cable group number corresponding to the chosen cable must be written in the variant position, see pages 15 and 17.
Recommended triaxial cables for S and E Series (page 19)
LEMO cable
Part Number
LEMO
cable group
Impedance Conductor Dielectric Screen 1 Screen 2 Sheath
Type
(Ω)
ø (mm)
ø (mm)
ø (mm)
ø (mm)
ø (mm)
CTR.50.RG1.78BU29M
CTR.50.RG1.74AU39N
RGT 178
RGT 174
1
2
3
5
4
4
4
6
4
5
7
7
50
2
2
2
2
3
3
3
3
3
3
3
3
0.30
0.48
0.94
1.60
0.72
0.80
0.60
0.30
1.00
0.84
1.40
1.60
0.90
1.55
2.90
4.80
4.55
3.70
3.70
1.60
4.50
3.70
6.50
7.30
1.37
1.90
3.50
–
2.30
2.90
5.20
–
2.80
3.90
6.10
10.20
8.43
8.00
8.00
3.60
8.50
9.20
10.90
12.10
50
50
50
75
75
75
75
75
75
75
75
9222 Belden 1)
HF-2318 Dätwyler
8215 Belden
–
–
8232A Belden
HF-2426 Dätwyler
RGT 179
–
–
–
–
2.10
5.20
–
3.10
7.20
–
375 029 LEDE
466 140 LEDE
Triax 8 Nokia
9267 Belden
Triax 11 Nokia
8233A Belden
7.20
–
9.40
–
Note: 1) when used with 1S.650 / 1E.650, please request large contact bucket («W» type).
30
www.lemo.com
®
®
www.lemo.com
31
®
®
32
www.lemo.com
®
®
Product safety notice
PLEASE READ AND FOLLOW ALL INSTUCTIONS CAREFULLY AND CONSULT ALL RELEVENT NATIONAL AND
INTERNATIONAL SAFETY REGULATIONS FOR YOUR APPLICATION.
IMPROPER HANDLING, CABLE ASSEMBLY, OR WRONG USE OF CONNECTORS CAN RESULT IN HAZARDOUS
SITUATIONS.
1. SHOCK AND FIRE HAZARD
Incorrect wiring, the use of damaged components, presence of foreign objects (such as metal debris), and / or residue
(such as cleaning fluids), can result in short circuits, overheating, and / or risk of electric shock.
Mated components should never be disconnected while live as this may result in an exposed electric arc and local
overheating, resulting in possible damage to components.
2. HANDLING
Connectors and their components should be visually inspected for damage prior to installation and assembly. Suspect
components should be rejected or returned to the factory for verification.
Connector assembly and installation should only be carried out by properly trained personnel. Proper tools must be used
during installation and / or assembly in order to obtain safe and reliable performance.
3. USE
Connectors with exposed contacts should never be live (or on the current supply side of a circuit). Under general
conditions voltages above 30 VAC and 42 VDC are considered hazardous and proper measures should be taken to
eliminate all risk of transmission of such voltages to any exposed metal part of the connector.
4. TEST AND OPERATING VOLTAGES
The maximum admissible operating voltage depends upon the national or international standards in force for the
application in question. Air and creepage distances impact the operating voltage; reference values are indicated in the
catalog however these may be influenced by PC board design and / or wiring harnesses.
The test voltage indicated in the catalog is 75% of the mean breakdown voltage; the test is applied at 500 V/s and the
test duration is 1 minute.
5. CE MARKING
CE marking
means that the appliance or equipment bearing it complies with the protection requirements of one or
several European safety directives.
CE marking
applies to complete products or equipment, but not to electromechanical components, such as
connectors.
6. PRODUCT IMPROVEMENTS
The LEMO Group reserves the right to modify and improve to our products or specifications without providing prior
notification.
7.
WARNING (Prop 65 State of California)
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that
cause cancer, birth defects or other reproductive harm. LEMO products are exempt from proposition 65 warnings because
they are manufactured, marketed, and sold solely for commercial and industrial use. For further information, please visit
https://www.lemo.com/quality/LEMO-Prop-65-compliance-declaration.pdf.
Disclaimers
LEMO works constantly to improve the quality of its products; the information and illustrations figuring in this document may
therefore vary and are not binding. In any case, LEMO makes no specific warranty of merchantability, fitness for a particu-
lar purpose, third party components as such or included in assembly, non-infringement, title, accuracy, completeness, or
security. The user is fully responsible for his products and applications using LEMO component.
In no event shall LEMO, its affiliates, officers, agents or employees be liable for any incidental, indirect, special or consequen-
tial damages in connection with the products or services provided by LEMO, including (without limitation) loss of profits
or revenues, interruption of business, loss of use of the products or any associated equipment, materials, components or
products, damages to associated equipment or in combination with other components, materials.
Reproduction of significant portions of LEMO information in LEMO data books or data sheets is permissible only if repro-
duction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. LEMO is
not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions.
No reproduction or use without express permission of editorial or pictorial content, in any manner.
LEMO SA reserves the right to modify and improve specifications, at all times, without any notification.
www.lemo.com
33
LEMO HEADQUARTERS
SWITZERLAND
LEMO SA
Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 Ecublens
Tel. +41 21 695 16 00 - e-mail: info@lemo.com
LEMO SUBSIDIARIES
AUSTRIA
NETHERLANDS / BELGIUM
LEMO Connectors Nederland B.V.
Jacques Meuwissenweg 6
2031 AD Haarlem
LEMO Elektronik GesmbH
Lemböckgasse 49/E6-3
1230 Wien
Tel: +43 1 914 23 20 0
Fax:+43 1 914 23 20 11
salesAT@lemo.com
Tel. +31 23 206 07 01
info-nl@lemo.com
NORWAY / ICELAND
LEMO Norway A/S
Soerumsandvegen 69,
1920 Soerumsand
Tel: +47 22 91 70 40
Fax: +47 22 91 70 41
info-no@lemo.com
BRAZIL
LEMO Latin America Ltda
Av. Dr. Adhemar de Barros,
566 – Sala 1407, Vila Adyana
CEP: 12245-011
São José dos Campos - SP - Brazil
Tel: +55 11 94242 4293
info-la@lemo.com
SINGAPORE
LEMO Asia Pte Ltd
4 Leng Kee Road,
#06-09 SiS Building
Singapore 159088
Tel: +65 6476 0672
Fax: +65 6474 0672
sg.sales@lemo.com
CANADA
LEMO Canada Inc
44 East Beaver Creek Road, unit 20
Richmond Hill, Ontario L4B 1G8
Tel: +1 905 889 56 78
Fax: +1 905 889 49 70
info-canada@lemo.com
SPAIN / PORTUGAL
IBERLEMO SAU
Brasil, 45, 08402 Granollers
Barcelona
Tel: +34 93 860 44 20
Fax: +34 93 879 10 77
info-es@lemo.com
CHINA / HONG KONG
LEMO Electronics (Shanghai) Co., Ltd
First Floor, Block E,
18 Jindian Road, Pudong
Shanghai, China, 201206
Tel: +86 21 5899 7721
Fax: +86 21 5899 7727
cn.sales@lemo.com
SWEDEN / FINLAND
LEMO Nordic AB
Gunnebogatan 30, Box 8201
163 08 Spånga
Tel: +46 8 635 60 60
Fax: +46 8 635 60 61
info-se@lemo.com
DENMARK
LEMO Denmark A/S
Mandal Allé 16A
5500 Middelfart
Tel: +45 45 20 44 00
Fax: +45 45 20 44 01
info-dk@lemo.com
SWITZERLAND
LEMO Verkauf AG
Grundstrasse 22 B,
6343 Rotkreuz
FRANCE
LEMO France Sàrl
24/28 Avenue Graham Bell
Bâtiment Balthus 4
Tel: +41 41 790 49 40
ch.sales@lemo.com
Bussy Saint Georges
77607 Marne la Vallée Cedex 3
Tel: +33 1 60 94 60 94
Fax: +33 1 60 94 60 90
info-fr@lemo.com
TAIWAN
TAOYUAN TAIWAN
Tel: +886 967 132 824
speng@lemo.com
UNITED ARAB EMIRATES
LEMO Middle East Connectors LLC
Concorde Tower 6th Floor,
Dubai Media City, P.O. Box 126732
Dubai, United Arab Emirates
Tel: +971 55 222 36 77
GERMANY
LEMO Elektronik GmbH
Hanns-Schwindt-Str. 6
81829 München
Tel: +49 89 42 77 03
Fax: +49 89 420 21 92
info@lemo.de
info-me@lemo.com
UNITED KINGDOM
HUNGARY
LEMO UK Ltd
REDEL Elektronika Kft
Nagysándor József u. 6-12
1201 Budapest
12-20 North Street, Worthing,
West Sussex, BN11 1DU
Tel: +44 1903 23 45 43
lemouk@lemo.com
Tel: +36 1 421 47 10
Fax: +36 1 421 47 57
info-hu@lemo.com
USA
LEMO USA Inc
ITALY
P.O. Box 2408
LEMO Italia srl
Rohnert Park, CA 94927-2408
Tel: +1 707 578 88 11
+1 800 444 53 66
Fax: +1 707 578 08 69
info-US@lemo.com
Viale Lunigiana 25
20125 Milano
Tel: +39 02 66 71 10 46
Fax: +39 02 37 90 80 46
sales.it@lemo.com
JAPAN
LEMO Japan Ltd
2-7-22, Mita,
Minato-ku, Tokyo, 108-0073
Tel: +81 3 54 46 55 10
Fax: +81 3 54 46 55 11
info-jp@lemo.com
LEMO DISTRIBUTORS
ARGENTINA, AUSTRALIA, BRAZIL, CHILE, COLOMBIA, CZECH REPUBLIC,
GREECE, INDIA, ISRAEL, NEW ZEALAND, PERU, POLAND, RUSSIA,
SOUTH AFRICA, SOUTH KOREA, TURKEY, UKRAINE
www.lemo.com
EBG.1R.336.GLM 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
EBG.1R.803.GLM81 | ETC | CONN PNL MNT RCPT 8SKT | 获取价格 | |
EBG.3K.316.CLL | ETC | CONN RCPT FMALE 16POS SOLDER CUP | 获取价格 | |
EBG.3K.324.KLL | ETC | CONN RCPT FMALE 24POS SOLDER CUP | 获取价格 | |
EBG/BG5335S | STANLEY | Single Color φ5 Round Shape Type | 获取价格 | |
EBG1AM102F12OT^ | AISHI | Electrolytic Radial | 获取价格 | |
EBG1AM331E07OT^ | AISHI | Electrolytic Radial | 获取价格 | |
EBG1AM822L30OT^ | AISHI | Electrolytic Radial | 获取价格 | |
EBG1BM102M30OT^ | AISHI | Electrolytic Radial | 获取价格 | |
EBG1CM221E07OT^ | AISHI | Electrolytic Radial | 获取价格 | |
EBG1CM332W20OT^ | AISHI | Electrolytic Radial | 获取价格 |
EBG.1R.336.GLM 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6