F6N0.25CW100 [ETC]
SELF WRAP 1/4" X 100' CLEAR/WHT;
| 型号： | F6N0.25CW100 |
| 厂家： | 
ETC |
| 描述： | SELF WRAP 1/4" X 100' CLEAR/WHT |
| 文件： | 总2页 (文件大小：1531K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
GENERAL PURPOSE
Technical Data Sheet
Put-Ups
Easy, Cost And Labor
Nominal
Part
#
Wall
Monofilament
Diameter
Bulk
Box
Box
A
Box
B
Available
Colors
BK,OR,PG,CW
Lbs/
100’
Effective Installation
Size
Thickness
1/8”
1/4”
3/8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
F6N0.13
F6N0.25
F6N0.38
F6N0.50
F6N0.75
F6N1.00
F6N1.25
F6N1.50
F6N2.00
.024”
.025”
.025”
.025”
.025”
.038”
.038”
.038”
.038”
.008”
.010”
.010”
.010”
.010”
.015”
.015”
.015”
.015”
8,000’
3,000’
1,500’
1,200’
500’
400’
250’
250’
200’
400’
200’
150’
150’
100’
100’
75’
100’
100’
75’
75’
50’
50’
25’
25’
25’
0.47
0.60
1.20
1.40
1.60
2.00
2.40
2.70
3.60
More Flexible Than Split
Convoluted Or Spiral Wrap
5
5
5
5
5
5
5
5
25% Edge Overlap
Soft And Quiet In High
Vibration Uses
75’
50’
Cut And Abrasion Resistant
Chemically Inert
Halogen Free
Flexible, Semi-Rigid
Wrappable Split Braided Tube
Colors Available:
5= BK, OR, PG, CW,
and WH
F6’s unique split, semi-rigid braided construction
makes it the ideal solution for situations where
ease of installation is of primary importance.
The lateral split allows the tube to open up
to accommodate a wide variety of bundling
requirements, and the semi-rigid braid
configuration simply closes around the entire
installation without the need for any additional
fasteners (Velcro, tape, etc.)
The PET braid is lightweight, quiet and flexible. The 25%
edge overlap (at nominal diameter) allows coverage
around inline plugs, connectors and splices.
Cut Cleanly
Hot Knife
F6 will bend to a tight radius without distorting
or splitting open and, unlike full rigid tubing, will
not impair or affect the flexibility of harnesses.
Material
Polyethylene Terephthalate
Colors Available:
Grade
F6N
Monofilament Diameter
.008” - .015”
Black (BK), Orange (OR), Platinum Gray (PG),
Clear/White (CW), & White (WH).
Drawing Number
TF001F6-WD
The large overlap allows easy
installation over splices and
incline connectors without
Nominal Diameter
exposing wires and cables.
www.techflex.com
1 (833) SLEEVING • (973) 300-9242 • fax: (973) 300-9409
104 Demarest Road • Sparta, NJ 07871
FAR-25
GENERAL PURPOSE
Technical Data Sheet
Melt Point
ASTM D-2117
482°F (250°C)
ABRASION
Abrasion Resistance
FLAMMABILITY
Rating _____________________UL94VO
Maximum Continuous
Mil-I-23053
257°F (125°C)
High
Abrasion Test Machine
Taber 5150
Minimum Continuous
-94°F (-70°C)
Abrasion Test Wheel
Calibrase H-18
CHEMICAL
RESISTANCE
Abrasion Test Load
500g
1=No Effect
4=More Affected
2=Little Effect 5=Severely Affected
3=Affected
PHYSICAL
Room Temperature
80°F
PROPERTIES
Humidity
74%
Aromatic Solvents ________________ 2
Aliphatic Solvents_________________ 1
Chlorinated Solvents ______________ 3
Weak Bases ______________________ 1
Salts____________________________ 1
Strong Bases _____________________ 2
Salt Water 0-S-1926________________ 1
Hydraulic Fluid MIL-H-5606 _________ 1
Lube Oil MIL-L-7808 _______________ 1
De-Icing Fluid MIL-A-8243 __________ 1
Strong Acids _____________________ 3
Strong Oxidants __________________ 2
Esters/Ketones ___________________ 1
UV Light ________________________ 1
Petroleum _______________________ 1
Fungus ASTM G-21 ________________ 1
Halogen Free ___________________ Yes
RoHS __________________________ Yes
SVHC ________________________ None
Monofilament Diameter___ .008”-.015”
ASTM D-204
Flammability Rating ___________ UL94
Recommended Cutting _____Hot Knife
Colors _________________________ 5
Wall Thickness___________.024”-.038”s
Some Scuffing Visible
500 Test Cycles
Significant Wear Is Visible
With Several Braid
Filaments Broken
1,200 Test Cycles
Tensile Strength (Yarn) __________6-10
ASTM D-2256 Lbs
Specific Gravity ASTM D-792 _____1.38
Material Destroyed
1,950 Test Cycles
Moisture Absorption ___________.1-.2
% ASTM D-570
Hard Vacuum Data ASTM E-595
Pre-Test Weight
5,365.1 mg
TML __________________________ .19
CVCM ________________________ .00
WVR__________________________ .16
Post-Test Weight
4,850 mg
Smoke D-Max __________________ 56
ASTM E-662
Test End Loss Of Mass
Point Of Destruction
515.1 mg
Outgassing __________________ Med
Oxygen Index __________________ 21
ASTM D-2863
© 2021 Techflex® - Any unauthorized reproduction, in whole or part, in any medium whatsoever, without the express written permission of Techflex® is strictly forbidden.
Techflex® product names and logos are registered trademarks of Techflex®, unless otherwise attributed. The contents and illustrations contained herein are believed to be reliable.
Techflex® makes no warranties as to their accuracy or completeness and disclaims any liability in connection with their use. Techflex’s® only obligations are those in standard terms of
sale for these products and Techflex® will not be liable for any consequential or other damages arising due to misuse of these products or typographical errors or omissions.
07-26
Users should make their own evaluation to determine the suitability of these products for their unique and specific applications.
相关型号：
©2020 ICPDF网 联系我们和版权申明