FGF.0B.304.CLAD42Z [ETC]
CONN PLUG MALE 4POS SOLDER CUP;型号: | FGF.0B.304.CLAD42Z |
厂家: | ETC |
描述: | CONN PLUG MALE 4POS SOLDER CUP |
文件: | 总204页 (文件大小:33977K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
unipole & multipole
connectors
No reproduction or use without express permission of editorial or pictorial content, in any manner.
LEMO reserve the right at all times to modify and improve specifications without any notification.
®
®
LEMO unipole and multipole connectors
This catalogue gives the complete description of LEMO unipole and multipole type connectors. The LEMO manu-
facturing programme has been extended to almost 40 series divided into 7 product families with specific mating and
environmental characteristics. Each series includes a wide variety of plug, socket, coupler and bridge plug models,
available in contact configurations adapted to all round cables, including up to 114 conductors, and a maximum diam-
eter of 30 mm. Watertight and vacuumtight models are also available. Since LEMO connectors are perfectly screened
and designed to guarantee very low resistance to shell electrical continuity, they are particularly adapted to applications
where electromagnetic compatibility (EMC) is important.
Table of Contents
3 steps to select the right connector ............................................................................................................................................................................... 3
B Series (indoor, keyed)
Part Numbering system ........................................................................................................................................................................................ 13
Metal Housing models........................................................................................................................................................................................... 14
Elbow socket models ............................................................................................................................................................................................ 25
Plastic housing models.......................................................................................................................................................................................... 28
Watertight or vacuumtight models ........................................................................................................................................................................ 30
Bridge models ....................................................................................................................................................................................................... 34
Threaded-latching models..................................................................................................................................................................................... 35
Alignment Key and Polarized Keying System........................................................................................................................................................ 36
K Series (outdoor, keyed)
Part Numbering system......................................................................................................................................................................................... 38
Metal Housing models........................................................................................................................................................................................... 39
Watertight or vacuumtight models ........................................................................................................................................................................ 47
Alignment Key and Polarized Keying System........................................................................................................................................................ 49
T Series (outdoor, keyed)
Part Numbering system......................................................................................................................................................................................... 51
Metal Housing models........................................................................................................................................................................................... 52
Watertight or vacuumtight models ........................................................................................................................................................................ 55
Plastic housing models.......................................................................................................................................................................................... 56
B, K and T Series Insert configuration, Housings, Insulators, Contacts, Collets, Variant.................................................................................... 57
S Series (indoor, stepped insert)
Part Numbering system ........................................................................................................................................................................................ 75
Metal Housing models........................................................................................................................................................................................... 76
Elbow socket models ............................................................................................................................................................................................ 87
Plastic housing models.......................................................................................................................................................................................... 89
Watertight or vacuumtight models ........................................................................................................................................................................ 91
E Series (outdoor, stepped insert)
Part Numbering system......................................................................................................................................................................................... 94
Metal Housing models........................................................................................................................................................................................... 95
Watertight or vacuumtight models ...................................................................................................................................................................... 101
S, and E Series Insert configuration, Housings, Insulators, Contacts, Collets, Variant ..................................................................................... 103
M Series (outdoor, keyed).............................................................................................................................................................................................. 123
F Series (outdoor, keyed)............................................................................................................................................................................................... 125
Spare parts...................................................................................................................................................................................................................... 127
Accessories..................................................................................................................................................................................................................... 137
Tooling............................................................................................................................................................................................................................. 151
Panel cut-outs and PCB drilling pattern ...................................................................................................................................................................... 157
Cable assembly (B, K, T, S and E series)........................................................................................................................................................................ 169
Technical characteristics .............................................................................................................................................................................................. 182
Product safety notice..................................................................................................................................................................................................... 198
www.lemo.com
1
®
®
Precision modular connectors to suit your application
Since its creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull
connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in
more than 80 countries with the help of over 40 subsidiaries and distributors.
Over 75000 connectors
The modular design of the LEMO range provides over 75000 connectors from miniature ø 3 mm to ø 50 mm, capable of
handling cable diameters up to 30 mm and for up to 114 contacts.
This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in
most markets, including medical devices, test and measurement instruments, machinery, audio video broadcast, tele-
communications and military.
LEMO’s Push-Pull Self-Latching Connection System
This self-latching system is renowned worldwide for its easy and quick mating and unmating features. It provides abso-
lute security against vibration, shock or pull on the cable, and facilitates operation in a very limited space.
The LEMO self-latching system allows the connector
to be mated by simply pushing the plug axially into
the socket.
Once firmly latched, connection cannot be broken
by pulling on the cable or any other component part
other than the outer release sleeve.
When required, the connector is disengaged by a
single axial pull on the outer release sleeve.
This first disengages the latches and then withdraws
the plug from the socket.
UL Recognition
LEMO connectors are recognized by the Underwriters Laboratories (UL). The approval of the complete system (LEMO
connector, cable and your equipment) will be easier because LEMO connectors are recognized.
CE marking
CE marking
means that the appliance or equipment bearing it complies with the protection requirements of one
or several European safety directives. CE marking
applies to complete products or equipment, but not to elec-
tromechanical components, such as connectors.
RoHS
LEMO connector specifications conforms the requirements of the RoHS directive (2011/65/EU) of the European Parlia-
ment and the latest amendments. This directive specifies the restrictions of the use of hazardous substances in elec-
trical and electronic equipment marketed in Europe.
2
www.lemo.com
®
®
3 steps to select the right connector
l Step 1: Select connector series
Select the appropriate LEMO connector series according to the environmental parameters that will affect your device
or cable such as indoor, outdoor, temperature range, ingress protection of the mated connector and of your device.
Use the table shown on page 4.
Part number coding
.
.
.
B, K, T, S or E
l Step 2: Select connector size
2
Use the section (mm ) or the AWG of your cable wire to select the optimal contact diameter (values vary between
solder, crimp or print contact), see page 8.
Use this optimal contact diameter to determine the right connector size as well as the insert configuration, see page 6.
Part number coding
.
.
.
0, 1, 2, 3, 4, 5 or 6
l Step 3: Complete the part number
Now that you know the series, as well as the insulator configuration, complete the part numbering system with the help
of the following table.
Part number coding
.
.
.
Insert
Housing
Insulator
material
Model
Series
Contact
Collet
Variant
configuration material
B Series (indoor, keyed)
K Series (outdoor, keyed)
T Series (outdoor, keyed)
14
39
53
14
39
53
76
95
57
57
64
64
64
64
64
64
67
68
71
71
57
64
64
64
70
71
S Series (indoor, stepped insert)
E Series (outdoor, stepped insert)
76
95
103
103
112
112
112
112
112
112
115
119
121
121
Note: Figures in the above table refer to the catalogue pages.
www.lemo.com
3
®
®
Step 1: Select Connector Series
LEMO unipole and multipole connectors
The standard keyed Series (B, 00)
The characteristic feature of these connector series is a keying system which allows higher contact density and prevents all
errors in alignment. The various keying alternatives prevent unwanted cross mating of otherwise similar connectors. It is
also possible to use crimp contacts to reduce cable assembly time. These connector series, include the 0B to 5B range as
well as the 00 multipole, some vacuumtight models are also available.
The watertight keyed Series (K, T)
These series are watertight when mated and assembled to an appropriate cable. They include the 0K to 5K series and the
TT to 3T series, available in the same types as the 0B to 5B series.
The standard Series (S, 00)
The characteristic feature of these connector series is the hermaphroditic insulator in the multipole version. They include
principally the 0S to 6S series, as well as the 00 unipole series.
The watertight Series (E)
These series are watertight when mated and assembled to an appropriate cable. They include the 0E to 6E series and are
available in the same types as the S series.
00 multipole
B
00 unipole
S
Series
K
T
E
outdoor or
Environment
Ingress protection 1)
Ingress protection 2)
Temperature range
Latching
indoor
IP50
indoor
IP50
outdoor or harsh environment
IP66 to IP68
harsh environment
IP66 to IP68
IP50 to IP68
vacuumtight
IP66 to IP68
vacuumtight
IP50 to IP68
vacuumtight
IP66 to IP68
vacuumtight
- 55 to 250°C
- 55 to 200°C
- 55 to 250°C
- 55 to 200°C
Push-Pull self-latching
5 metal
8 metal
7 metal
Shell sizes
6 metal
Multipole
6 metal
and 4 plastic
and 5 plastic
Unipole or multipole
Insulator type
Contact type
Features
hermaphroditic
Solder, crimp or print
9 keyways
Solder, crimp or print
13 keyways
11 to 36
4 keyways
51 to 56
Stepped insert
Page
37 to 50
73 to 92
93 to 102
Note:
1) Mated connector. See ingress protection code p. 5. 2) Your device. For selection of connectors for watertight and vacuumtight devices, see p. 5.
4
www.lemo.com
®
®
Definition of Ingress Protection (IP code)
IEC 60529 outlines an international classification system
for the sealing effectiveness of enclosures of electrical
equipment against the intrusion into the equipment of for-
eign bodies (i.e. tools, dust, fingers) and moisture. This
classification system utilizes the letters «IP» (Ingress Pro-
tection) followed by two digits.
Example: IP 50 = IP
5
0
IP letter code
1st digit
2nd digit
Degrees of protection - First digit
Degrees of protection - Second digit
The first digit of the IP code indicates the degree to which
persons are protected against contact with moving parts
and the degree that equipment is protected against solid
foreign bodies intruding into an enclosure.
The second digit indicates the degree of protection of the
equipment inside the enclosure against the harmful entry
of various forms of moisture (e.g. dripping, spraying, sub-
mersion, etc.)
First digit description
No special protection
Second digit description
No special protection
Code
Code
0
1
2
3
4
5
6
7
8
0
1
2
3
4
5
6
7
8
Protection from a large part of the body such as hand
or from solid objects greater than 50 mm in diameter
Protection from vertically dripping water
Protection against objects not greater than 80 mm in length
and 12 mm in diameter
Protection from dripping water when tilted up to 15°
Protection from sprayed water
Protection from entry by tools, wires, etc.,
with a diameter or thickness greater than 2.5 mm
Protection from entry by solid objects
Protection from splashed water
with a diameter or thickness greater than 1.0 mm
Protection from the amount of dust that would interfere
with the operation of the equipment
Protection from water projected from a nozzle
Protection against heavy seas, or powerful jets of water
Protection against temporary immersion
Dust-tight
–
–
Protection against complete continuous submersion in water
Selection of connectors for watertight or vacuumtight devices
LEMO B and S series are rated IP50 only when mated. LEMO E, K and T series are rated IP66 (and over) only when
mated. If a device must be watertight or vacuumtight when the connectors are unmated, it is important to select a water-
tight or vacuumtight socket. You can consider the following two situations:
A) Figure 1 shows a typical outdoor device. To ensure this
device retains IP66 or above when connectors are
unmated, it is important to choose a watertight socket
from B, S, E, K or T series.
B) Figure 2 shows a device which is subjected to pressure
difference such as a near vacuum or pressurized gas
and must exhibit no leakage. To ensure the device
maintains its sealing, the socket is additionally tested for
helium leakage (according MIL 1344A).
Fig. 1
Fig. 2
your device
your device
epoxy
resin seal
FGG plug B series
FGG plug K series
HGG socket B series
EGG socket K series
Check temperature range (see section on pages 30, 47, 55, 91 and 101).
www.lemo.com
5
®
®
Step 2: Select Connector Size
Select the right connector size and insert configuration
To be able to select the right connector size (0 to 6), it is important to define the contact diameter (ø A).
Find out the available contact diameter (ø A) of the LEMO connector depending on the number of contacts required and
depending on the rating required (see pages 57 to 63 and 103 to 111).
The following table shows the contact diameter (ø A).
Series
1
1
1
1
1
1
1
113
116
120
130
140
160
112
1.3
1.6
2.0
3.0
3.0
4.0
4.0
6.0
4.0
6.0
12.0
6.0
2
3
302
303
304
305
306
307
308
309
310
312
313
314
316
318
319
320
322
324
326
0.5
0.5
0.9
0.9
0.7
0.7
0.5
0.5
1.3
1.3
0.9
0.9
0.7
0.7
0.7
2.0
1.6
1.3
1.3
1.3
1.3
0.9
3.0
2.0
6.0
4.0
0.9
0.7
0.7
1.3
0.9
0.9
1.6
1.3
1.3
2.0
2.0
2.0
4.0
3.0 6.0/4.0 6.0
3.0 4.0 8.0
4
0.5
2.0
3.0
5
0.35
0.35
1.6
0.9/0.7 1.3 2.0/1.3 3.0/2.0 4.0/3.0
6
1.6
2.0
2.0
0.7
1.3
1.3
2.0
3.0
3.0
2.0
7
1.6
1.3/0.9 1.3 2.0/1.3
8
1.3
0.9
0.9
1.3
1.3
1.3
1.3
1.3
1.3
9
0.5
1.3/2.0
1.3
10
12
13
14
16
18
19
20
22
24
26
0.5
0.9
0.7
1.6
1.3
3.0
1.3
0.9
0.9
0.9
0.9
0.9
0.35
0.7
0.5
0.9
2.0 4.0/5.0
0.5
0.5
0.7
0.7
0.7
0.7
0.9
0.9
0.9
2.0
2.0
1.3 3.0/2.0
0.9 2.0
0.9 3.0/1.6 4.0
0.9
3.0
0.7
0.7
0.7
0.7
0.9
0.9
1.6
0.9
1.6
3.0
1.6
0.9 3.0/1.6
0.9
0.5
6
www.lemo.com
®
®
Series
30
32
36
40
44
48
50
54
60
62
64
72
106
330
332
336
340
344
348
350
354
360
362
364
372
106
0.7
0.9
1.3
1.3
2.0
0.5
2.0
2.01)
1.3
1.3
1.3
1.3
0.7
0.7
1.3
2.0
1.3
0.9
0.9
2.0
1.6
1.6
1.3
1.3
0.9
0.9
Note: 1) 2.0 is for 6S series, for 6E the values are 1.3 and 5.0.
www.lemo.com
7
®
®
Verify the fitting to your wire
Verify if the selected contact diameter (ø A) of the LEMO connector fits to your cable wire diameter (AWG number or
max. available section).
Conductor
Contact
Solid
Stranded
Section (mm2)
1)
(N)
Fr
Contact type
Notes
Section
AWG
min. max.
ø A
ø C
Form
AWG
max.
(mm) (mm) per fig. max.
(mm2)
min.
max.
0.35 0.40
0.52) 0.402)
0.5
0.457)
0.73) 0.603)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
1
2
1
2
2
1
2
2
1
2
1
2
1
1
28
28
28
24
22
226)
20
16
14
10
10
–
0.09
–
–
30
–
–
0.05
0.05
0.09
0.14
0.34
0.346)
0.50
1.00
1.50
4.00
6.00
10.00
10.00
21.00
50.00
0.09
0.34
0.09
0.50
0.34
0.09
1.00
0.50
0.34
1.50
1.00
2.50
1.50
4.00
6.00
–
–
Solder
0.09
30
0.09
–
28
–
–
0.25
–
26
–
–
0.7
0.9
1.3
1.6
2.0
3.0
4.0
5.0
6.0
8.0
0.80
0.806)
1.00
1.40
1.80
2.70
3.70
5.20
5.20
7.00
0.34
0.346)
–
224)
224)6)
204)
18
–
–
–
–
–
ø A
ø C
ø C
0.50
–
–
–
l
1.00
–
–
–
ø A
1.50
4.00
6.00
–
–
16
–
–
–
12
–
–
–
10
–
–
–
8
–
–
–
–
–
8
–
–
–
–
–
4
–
–
12.0 11.50
0.55) 0.45
–
–
–
0
–
–
–
–
32
26
32
24
26
32
20
24
26
18
22
16
18
14
12
28
224)
0.035
0.140
0.035
0.250
0.140
0.035
0.500
0.250
0.140
1.000
0.340
1.500
1.000
2.500
4.000
12
22
22
30
30
30
40
40
40
50
50
65
65
75
90
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Crimp
0.7
0.7
0.9
0.9
0.9
1.3
1.3
1.3
1.6
1.6
2.0
2.0
3.0
4.0
0.80
0.45
1.10
0.80
0.45
1.40
1.10
0.80
1.90
1.40
2.40
1.90
3.20
4.00
–
–
fig. 1
ø A
ø A
ø C
ø C
–
–
28
–
–
20
224)
–
–
–
–
28
–
–
18
–
–
20
–
–
224)
144)
18
fig. 2
–
–
ø A
ø A
ø C
ø C
–
–
–
–
124)
–
–
14
104)
10
–
–
–
–
N1)ote:
2) contact retention force in the insulator (according to IEC 60512-8 test 15 a).
for 00/TT multipole series.
3)
for S, E series.
4)
for a given AWG, the diameter of some stranded conductor designs is larger than the solder cup diameter. Make sure that the maximum conductor
diameter is smaller than ø C.
5)
6)
7)
for 00 /TT multipole series or for 0B/0T and 1B/1T series with male contacts.
for 0B.302/0B.303, 0K.302/0K.303 and 0T.302/0T.303 ø C = 1.0 mm, AWG max 20, section max (mm2) 0.50.
for 00/TT and 1B/1K/1T series, according to manufacturing and plating tolerance ø C min = 0.43 mm.
l First choice alternative
l Special order alternative
8
www.lemo.com
®
®
Verify the fitting to your wire
Verify if the selected contact diameter (ø A) of the LEMO connector fits to your cable wire diameter (AWG number or
max. available section).
Conductor
Contact
Solid
Stranded
Section (mm2)
min. max.
1)
Fr
Contact type
Notes
AWG
min. max.
Section
(N)
ø A
ø C
Form
AWG
max.
max.
(mm) (mm) per fig.
(mm2)
Print
L
ø C
ø C
ø A
ø A
l
L dimensions and C are detailed in the section on PCB drilling pattern.
See page 163 and 167.
L
Print (elbow)
L
ø A
l
L dimensions and C are detailed in the section on PCB drilling pattern.
See page 164 and 168.
ø C
Note: 1) contact retention force in the insulator (according to IEC 60512-8 test 15 a).
Verify the fitting to your cable
Verify if the selected connector size fits to your cable diameter.
Cable diameter range (mm)
Collet for fitting
Cable diameter range (mm)
Cable diameter range (mm)
Collet for fitting
a bend relief
Collet for fitting
a bend relief
Series
Collet
min.
Series
Collet
min.
Series
Collet
min.
a bend relief
max.
3.5
min.
1.4
max.
max.
3.0
min.
2.4
max.
3.0
max.
5.0
min.
1.0
max.
5.0
001)
0B
1B
XB
2B
3B
4B
5B
1.4
1.4
2.2
4.4
1.4
4.2
4.9
9.6
3.5
5.2
TT
0T
1T
2T
3T
2.4
1.0
1.3
1.3
2.6
0E
1E
2E
3E
4E
5E
6E
1.0
1.3
5.6
7.6
1.4
2.2
4.4
1.4
4.2
4.9
9.6
6.53)
1.0
1.3
1.3
2.6
6.53)
8.53)
1.3
1.3
2.6
4.8
–
8.53)
7.2
8.53)
10.53)
15.03)
8.53)
10.53)
15.03)
1.3
10.53)
15.03)
23.53)
23.5
10.53)
15.03)
15.0
–
8.0
7.0
2.6
9.9
9.2
4.8
002)
0S
1S
2S
3S
4S
5S
6S
1.3
1.3
1.4
1.3
2.6
4.1
6.1
11.1
4.4
1.3
1.3
1.4
1.3
2.6
4.1
–
4.4
6.23)
8.73)
10.53)
13.03)
13.0
–
11.9
16.0
25.0
11.0
15.0
15.5
9.6
6.23)
8.73)
10.53)
13.03)
22.03)
30.0
13.0
30.0
–
–
0K
1K
2K
3K
4K
5K
1.0
1.3
1.3
2.6
4.6
9.6
5.0
1.0
1.3
1.3
2.6
4.6
–
5.0
8.53)
8.53)
10.53)
15.03)
23.53)
23.5
10.53)
15.03)
15.0
–
30.0
–
–
Note:
1)
2)
3)
for multipole only.
for unipole only.
for these series the maximum cable diameter require models with oversized cable collet (type K).
www.lemo.com
9
®
®
10
www.lemo.com
®
®
B Series
B series connectors provide the following main features:
– security of the Push-Pull self-latching system
– solder, crimp or print contacts (straight or elbow)
– multiple key options to avoid cross mating
of similar connectors
– multipole types 2 to 64 contacts
– high packing density for space savings
– keying system («G» key standard)
for connector alignment
– 360° screening for full EMC shielding.
Metal housing models (page 14)
Fixed plugs
Straight plugs
Fixed sockets
Free sockets
FGG
FGG
JGG
FFG
FNG
FEG
FDG
FIG*
EZG
FAG
FWG
PHG
PHG
EGG
ENG
EKG*
ESG*
EHG
EJG*
EEG
EFG
ECG
Elbow plugs
EYG
FPG
FHG
PNG
XPF*
Fixed sockets
ECG
ECG
PKG
PFG
PEG
Fixed coupler
FMG*
L G
•
R
••
FKG*
FSG
Elbow socket models (page 25)
Elbow sockets
Note: * Contact LEMO for details.
EPG
XBG, EXG
Plastic housing models (page 28)
Bridge models (page 34)
Straight plugs
Fixed sockets
Plug with two
parallel sockets
Bridge plugs
FGG
FGY
FGG
FGY
ENG
FTG*
CFF, CRG
ENY
Watertight or vacuumtight models (page 30)
Threaded-latching models (page 35)
Fixed plug
Fixed sockets
Fixed coupler
Straight plugs
Fixed socket
HEG
HMG
FVG
ESG
HGG
HHG
HCG
Elbow socket
YHG
S
••
FVB
XRB
HNG
12
www.lemo.com
®
®
Part Numbering System
Plug
F G G 1 B 3 0 6 C L A D 6 2
. . .
Free socket
P H G 1 B 3 0 6 C L L D 6 2 Z
. . .
Variant: (page 71)
Cable ø: (page 67)
Collet type: (page 67)
Fixed socket
E G G 1 B 3 0 6 C Y M
.
.
.
Coupler
R J G 1 B 3 0 6 C L A
.
.
.
Model: (page 14)
Variant: (page 71)
Contact: (page 64)
Insulator: (page 64)
Housing: (page 64)
Alignment key: (page 36)
Series: (page 14)
Insert configuration: (page 57)
FGG.1B.306.CLAD62 = straight plug with key (G) and cable collet, 1B series, multipole type with 6 contacts, outer shell in chrome-plated
brass, PEEK insulator, male solder contacts, D type collet for 6.0 mm diameter cable.
PHG.1B.306.CLLD62Z = free socket with key (G) and cable collet, 1B series, multipole type with 6 contacts, outer shell in chrome-
plated brass, PEEK insulator, female solder contacts, D type collet for 6.0 mm diameter cable and nut for fitting a bend relief.
EGG.1B.306.CYM = fixed socket, nut fixing, with key (G), 1B series, multipole type with 6 contacts, outer shell in chrome-plated brass,
PEEK extended insulator, female crimp contacts.
RJG.1B.306.CLA = straight fixed coupler with keys (J) at the flange end and key (G) at the other end, 1B series, multipole type with 6
contacts, outer shell in chrome-plated brass, PEEK insulator, male-female contacts.
Part Section Showing Internal Components
Straight plug
Fixed socket
7
6
2
3
4
5
1
1
6
5
4
2
7
3
outer shell
latch sleeve
collet nut
1
2
3
4
5
6
7
1
2
3
4
5
6
7
outer shell
earthing crown
retaining ring
hexagonal nut
locking washer
insulator
split insert carrier
insulator
male contact
collet
female contact
www.lemo.com
13
®
®
Metal housing models
Technical Characteristics
Mechanical and Climatical
Electrical
Characteristics
Endurance1)
Value
> 5000 cycles
Standard
Characteristics
Value
Standard
IEC 60512-5 test 9a
at 10 MHz
at 1 GHz
> 75 dB
> 40 dB
IEC 60169-1-3
IEC 60169-1-3
Shielding
efficiency
Humidity
up to 95% at 60° C
Temperature range
Resistance to vibrations
Shock resistance
- 55° C, + 250° C
Note:
the various tests have been carried out with FGG and EGG connector
pairs, with chrome-plated brass shell and PEEK insulator.
10-2000 Hz, 15g IEC 60512-4 test 6d
Detailed electrical characteristics, as well as materials and treatment are
presented in the chapter Technical Characteristics on page 182.
100 g, 6 ms
> 1000h
IP 50
IEC 60512-4 test 6c
IEC 60512-6 test 11f
IEC 60529
1)
see page 189, contact resistance after mating cycles. See page 185,
Salt spray corrosion test2)
Protection index (mated)
Climatical category
mechanical endurance latching force.
2)
for chrome plated product («C» material code).
55/175/21
IEC 60068-1
FGG Straight plug, key (G) or keys (A…M and R), cable collet
Reference
Model Series
Dimensions (mm)
S1
A
L
M
S2
FGG
FGG
FGG
FGG
FGG
FGG
FGG
FGG
001)
0B
1B
XB
2B
3B
4B
5B
6.4 28.5 20.5 5.5
9.5 36.0 26.0 8.0
12.0 43.0 32.0 10.0
5
7
9
~L
~M
S 1
13.0 44.0 33.5 11.0 10
15.0 50.0 38.0 13.0 12
18.0 58.0 43.0 15.0 14
25.0 75.0 57.0 21.0 20
35.0 103.0 78.0 31.0 30
S 2
M1
Cable assembly (page 169)
Note: 1) the surface design of the 00 series is different.
2)
FGG Straight plug, key (G) or keys (A…M), cable collet and nut for fitting a bend relief
Reference
Dimensions (mm)
S1
Model Series
A
L
M
S2
FGG
FGG
FGG
FGG
FGG
FGG
FGG
001)
0B
1B
XB
2B
3B
4B
6.4 28.7 20.7 5.5
9.5 35.0 25.0 8.0
12.0 42.0 31.0 10.0
6
7
9
~L
~M
13.0 47.5 37.0 11.0 10
15.0 49.0 37.0 13.0 12
18.0 56.5 41.5 15.0 15
25.0 71.0 53.0 21.0 20
S 2
S 1
M1
Cable assembly (page 169)
Note: 1) the surface design of the 00 series is different.
Note: 2) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
14
www.lemo.com
®
®
JGG Straight plug, short version, key (G), cable collet
~L
~M
Reference
Dimensions (mm)
Model Series
A
L
M
S1
8
S2
7
S 2
S 1
JGG
0B
9.5
32
22
Cable assembly (page 171)
M4
FFG Straight plug, non-latching, key (G) or keys (A…M), cable collet
Reference
Dimensions (mm)
Model Series
A
L
M
S1
S2
~L
FFG
FFG
FFG
FFG
FFG
0B
1B
2B
3B
4B
9.5 36
12.0 43
15.0 50
18.0 58
25.0 75
26
32
38
43
57
8
7
~M
S 1
10
13
15
21
9
12
14
20
S 2
Cable assembly (page 169)
M1
FNG Straight plug, key (G) or keys (A…M and R), cable collet and lanyard release
Reference
Dimensions (mm)
Model Series
A
B
L
M
N
S1
8
S2
FNG
FNG
FNG
FNG
FNG
FNG
0B
1B
2B
3B
4B
5B
9.5 15.5 36.0 26.0 140
7
~L
12.0 18.0 43.0 32.0 140 10
15.0 21.0 49.0 37.0 160 13
18.0 25.0 58.0 43.0 190 15
25.0 32.0 75.0 57.0 230 21
35.0 42.0 103.0 78.0 300 31
9
~M
12
14
20
30
Cable assembly (page 169)
M1
S 2
S 1
Note: cable material: stainless steel with Polyamide sheath.
www.lemo.com
15
®
®
1)
FEG Straight plug, key (G) or keys (A…L), cable collet, front seal and nut for fitting a bend relief
(IP 54 protection index when mated)
Reference
Dimensions (mm)
Model Series
A
L
M
S1
8
S2
~L
FEG
FEG
FEG
FEG
0B
1B
2B
3B
11.0 35.0 25.0
7
9
~M
13.5 42.0 33.0 10
16.5 48.0 36.0 13
19.0 56.5 41.5 15
12
15
S 2
S 1
Cable assembly (page 169)
M1
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
FDG Straight plug, long version, key (G) or keys (A…L), cable collet
~L
Reference
Dimensions (mm)
~M
Model Series
A
L
M
S1
S2
FDG
FDG
1B
2B
12
15
68
79
57
67
10
13
9
12
S 2
S 1
Cable assembly (page 171)
M2
FWG Fixed plug, nut fixing, key (G) or keys (A…L)
Reference
Dimensions (mm)
L maxi
N
Model Series
A
B
e
E
L
M
N1) S1 S3
S 3
M
FWG
FWG
FWG
FWG
0B
1B
2B
3B
14.0 12.4 M9x0.6 1.8 22.5 14.5 19.5 8.2 11
18.0 15.8 M12x1.0 2.9 24.9 17.0 24.8 10.5 14
19.5 19.2 M15x1.0 4.1 28.6 18.0 27.3 13.5 17
25.0 25.0 M18x1.0 4.2 32.1 23.0 31.5 16.5 22
S 1
E maxi
Panel cut-out (page 157)
P9
Note: 1) maximum length with crimp contacts
16
www.lemo.com
®
®
FAG Fixed plug, non-latching, nut fixing, key (G) or keys (A…M and R)
Reference
Dimensions (mm)
Model Series
A
8
B
e
E
L
M
N1) S1 S3
FAG
FAG
FAG
FAG
FAG
FAG
FAG
00
0B
1B
2B
3B
4B
5B
10.2 M7x0.5 2.9 18.1 9.0 15.0 6.3
9
L maxi
N
10 12.4 M9x0.6 4.2 20.8 11.5 18.9 8.2 11
14 15.8 M12x1.0 5.4 25.2 12.5 21.6 10.5 14
18 19.2 M15x1.0 6.0 28.7 13.8 23.9 13.5 17
22 25.0 M18x1.0 5.8 32.1 17.0 30.2 16.5 22
29 34.0 M25x1.0 6.8 37.1 20.5 34.7 23.5 30
S 3
M
40 40.0 M35x1.0 6.8 47.1 28.0 42.8 33.5
–
E maxi
S 1
P1 Panel cut-out (page 157)
Note: The 5B series is delivered without locking washer or tapered washer
and with a round nut.
Note: 1) maximum length with crimp contacts.
FPG Elbow (90°) plug, key (G) or keys (A…M and R), cable collet
L
Reference
Model Series
Dimensions (mm)
S1
M
A
H
L
M
S2
S3
S 1
FPG
FPG
FPG
FPG
00
0B
1B
2B
7.5 18 24.5 16.5 6.5
9.5 23 30.0 20.0 8.0
12.0 29 36.0 25.0 11.0
5
7
9
5.5
8.0
10.0
S 3
S 2
15.0 35 41.5 29.5 13.5 12 13.0
M3 Cable assembly (page 169)
FHG Elbow (90°) plug, key (G) or keys (A…M and R), cable collet
L
S 1
M
Reference
Model Series
Dimensions (mm)
A
D
H
L
M
S1
S2
S3
FHG
FHG
FHG
3B
4B
5B
19
26
36
10
15
21
37
52
74
50
67
90
35
49
65
17
22
32
14
20
30
15
21
31
S 3
S 2
D
M3 Cable assembly (page 169)
FSG Anglissimo right angle plug, key (G) or keys (A…M), cable collet
Reference
Dimensions (mm)
L
Model Series
A
H
L
M
S1
S2
M
FSG
FSG
FSG
FSG
FSG
00
0B
1B
2B
3B
8.0 18.1 24.8 16.8
10.0 22.4 30.3 20.3
12.0 26.4 36.5 25.5
5
7
9
7
9
11
15
19
S 2
S 1
16.5 34.5 44.0 32.0 12
20.0 39.2 52.4 37.4 14
M5 Cable assembly (page 170)
www.lemo.com
17
®
®
EGG Fixed socket, nut fixing, key (G) or keys (A…M and R)
Reference
Dimensions (mm)
Model Series
A
8
B
e
E
L
M
N1) S1 S3
EGG
EGG
EGG
EGG
EGG
EGG
EGG
EGG
00
10.2 M7x0.5 6.0 15.5 1.0 13.7 6.3
9
0B
1B
XB
10 12.4 M9x0.6 7.0 20.7 1.2 19.1 8.2 11
14 15.8 M12x1.0 7.5 23.0 1.5 21.1 10.5 14
16 19.0 M14x1.0 7.0 23.5 1.5 20.0 12.5 17
L maxi
N
M
S 3
2B2) 18 19.2 M15x1.0 8.5 26.7 1.8 24.6 13.5 17
3B
4B
5B
22 25.0 M18x1.0 11.5 30.7 2.0 28.1 16.5 22
28 34.0 M25x1.0 12.0 35.7 2.5 34.1 23.5 30
E maxi
S 1
40 40.0 M35x1.0 11.0 43.5 3.0 39.6 33.5
–
Panel cut-out (page 157)
P1
Note: The 5B series is delivered with a tapered washer and a round nut.
Note: 1) maximum length with crimp contacts.
2) EGG.2B.304.CLL and EGG.2B.307.CLL are UL 508A under file E119802.
ENG Fixed socket with earthing tag, nut fixing, key (G) or keys (A…M)
Reference
Dimensions (mm)
Model Series
A
8
B
e
E
L
M
N1) S1 S3
ENG
ENG
ENG
ENG
ENG
ENG
00
10.2 M7x0.5 6.0 15.5 1.0 13.7 6.3
9
L maxi
N
0B
1B2)
2B
3B
4B
10 12.4 M9x0.6 7.0 20.7 1.2 19.1 8.2 11
14 15.8 M12x1.0 7.5 23.0 1.5 21.1 10.5 14
18 19.2 M15x1.0 8.5 26.7 1.8 24.6 13.5 17
22 25.0 M18x1.0 11.5 30.7 2.0 28.1 16.5 22
28 34.0 M25x1.0 12.0 35.7 2.5 34.1 23.5 30
S 3
M
E maxi
S 1
Panel cut-out (page 157)
P1
Note:
1) maximum length with crimp contacts.
2) for the 1B series the earthing tag is on the same side of the key.
EHG Fixed socket, nut fixing, key (G) or keys (A…M and R), and protruding shell
Reference
Dimensions (mm)
Model Series
A
8
B
e
E
L
M
N1) S1 S3
EHG
EHG
EHG
EHG
EHG
EHG
00
10.2 M7x0.5 2.0 15.5 8.5 13.7 6.3
9
L maxi
N
0B
1B
2B
3B
5B
10 12.4 M9x0.6 2.0 19.5 12.5 19.1 8.2 11
14 15.8 M12x1.0 4.0 21.7 12.0 21.1 10.5 14
18 19.2 M15x1.0 5.1 22.7 12.5 24.6 13.5 17
22 25.0 M18x1.0 7.1 30.7 13.5 30.3 16.5 22
S 3
M
40 40.0 M35x1.0 2.5 43.5 28.0 38.5 33.5
–
E maxi
S 1
Panel cut-out (page 157)
P1
Note: The 5B series is delivered without locking washer or tapered washer
and with a round nut.
Note: 1) maximum length with crimp contacts.
18
www.lemo.com
®
®
EEG Fixed socket, nut fixing, key (G) or keys (A…M and R) (back panel mounting)
Reference
Dimensions (mm)
N1)
Model Series
A
B
e
E
L
M
P
S1 S2
EEG
EEG
EEG
EEG
EEG
EEG
EEG
00
0B
1B
2B
3B
4B
5B
10 9.5 M7x0.5 2.3 15.5 2.5 13.7 6.0 6.3 7.5
12 12.5 M9x0.6 2.4 20.7 2.5 19.1 6.3 8.2 9.0
16 16.0 M12x1.0 6.5 23.0 3.5 21.1 11.0 10.5 13.0
20 20.0 M15x1.0 4.3 26.7 3.5 24.6 9.0 13.5 15.0
24 25.0 M18x1.0 6.1 30.7 4.5 28.1 12.0 16.5 20.0
30 32.1 M25x1.0 10.6 35.7 4.5 34.1 16.5 23.5 26.0
41 40.0 M35x1.0 13.5 43.5 5.0 39.6 19.5 33.5 38.0
L maxi
N
P
M
S 1
E maxi
S 2
Panel cut-out (page 157)
P1
Note: The 3B, 4B and 5B series are delivered with a conical nut.
The 5B series is delivered without locking washer or tapered washer.
Note: 1) maximum length with crimp contacts.
EFG Fixed socket, nut fixing, key (G) or keys (A…M), with two flats on the shell and O-ring
(back panel mounting)
L maxi
N
P
M
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
N1)
P
9
S2
8
EFG
0B
12 12.5 M9x0.6 5.5 20.7 2.5 19.1
E maxi
S 2
Panel cut-out (page 157)
P2
Note: 1) maximum length with crimp contacts.
ECG Fixed socket with two nuts, key (G) or keys (A…M and R) (back panel mounting)
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
N1) S1 S3
ECG
ECG
ECG
ECG
ECG
ECG
ECG
ECG
00
0B
1B
XB
2B
3B
4B
5B
10 10.2 M7x0.5 4.3 13.7 2.5 13.7 6.3
9
12 12.4 M9x0.6 5.5 20.7 2.5 19.1 8.2 11
16 15.8 M12x1.0 6.0 23.0 3.5 21.1 10.5 14
18 19.0 M14x1.0 6.0 23.5 3.5 20.0 12.5 17
20 19.2 M15x1.0 6.5 26.7 3.5 24.6 13.5 17
24 25.0 M18x1.0 9.0 30.7 4.5 28.1 16.5 22
30 34.0 M25x1.0 10.0 35.7 4.5 32.6 23.5 30
L maxi
N
S 3
M
E maxi
S 1
41 40.0 M35x1.0 9.0 43.5 5.0 39.6 33.5
–
Panel cut-out (page 157)
P1
Note: The 3B, 4B and 5B series are delivered with a conical nut.
The 5B series is delivered with a tapered washer and a round nut.
Note: 1) maximum length with crimp contacts.
www.lemo.com
19
®
®
ECG Fixed socket with two nuts, key (G) or keys (A…F and R) and straight contact for printed circuit
(back panel mounting)
Reference
Dimensions (mm)
Model Series
A
B
e
E
M
N
S1 S3
ECG
ECG
ECG
ECG
ECG
ECG
ECG
ECG
00
0B
1B
XB
2B
3B
4B
5B
10 10.2 M7x0.5 4.3 2.5 13.7 6.3
9
12 12.4 M9x0.6 5.5 2.5 16.1 8.2 11
16 15.8 M12x1.0 6.0 3.5 19.8 10.5 14
18 19.0 M14x1.0 6.0 3.5 20.0 12.5 17
20 19.2 M15x1.0 6.5 3.5 21.8 13.5 17
24 25.0 M18x1.0 9.0 4.5 25.8 16.5 22
30 34.0 M25x1.0 10.0 4.5 29.8 23.5 30
L
N
S 3
M
41 40.0 M35x1.0 9.0 5.0 36.8 33.5
–
E maxi
S 1
P1
Panel cut-out (page 157)
P15
PCB drilling pattern (page 160)
Note: The 3B, 4B and 5B series are delivered with a conical nut.
The 5B series is delivered with a tapered washer and a round nut.
Note: This contact type is available for Ell socket models fitted with
female contacts.
Length «L» depends on the number of contacts, see table on page 163.
ECG Fixed socket with two nuts, key (G) or keys (A…F) with elbow (90°) contact for printed circuit
(back panel mounting)
Reference
Dimensions (mm)
N
max
L
N
Model Series
A
B
e
E
M
S1 S3
S 3 S 1
M
ECG
ECG
ECG
ECG
0B
1B
2B
3B
12 12.4 M9x0.6 5.5 2.5 18.3 8.2 11
16 15.8 M12x1.0 6.0 3.5 20.3 10.5 14
20 19.2 M15x1.0 6.5 3.5 22.3 13.5 17
24 25.0 M18x1.0 9.0 4.5 27.8 16.5 22
E maxi
2
P1
Panel cut-out (page 157)
P17
PCB drilling pattern (page 164)
Note: The 3B series is delivered with a conical nut.
LlG Fixed socket, nut fixing, key (G) or keys (A…L)
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
N
S1 S2
LlG
LlG
LlG
0B
1B
2B
19 18.0 M13x0.75 4.0 20.7
22 20.2 M15x1.00 6.5 23.0
25 27.0 M20x1.00 7.5 26.7
4
4
4
19.1 11.5 16
21.1 13.5 16
24.6 18.5 24
V+
Red (GND)
(3.3-3.6 Vdc)
Green (GND)
Blue (GND)
Note: Only available with solder or crimp contacts.
LEG model is with LED flange, LNG model is with narrow LED flange and
LMG model is with single standby LED flange.
L
N
M
S 2
Dim. (mm)
L mini
Series
A
B
L
0B
1B
2B
13.1 11.6 24
15.1 13.6 26
20.1 18.6 29
E maxi
S 1 AWG 28 / AWG 30
+ 0.1
0
B
20
www.lemo.com
®
®
EZG Straight socket for printed circuit, key (G) or keys (A, B)
B
3
H
N
Reference
Dimensions (mm)
Model Series
A
B
7
H
K
7
N
EZG
00
6.8
5.08
14
K
P15 P16
PCB drilling pattern (pages 160 and 163)
+
EZG Straight socket for printed circuit, key (G) or keys (A…F)
Reference
Model Series
Dimensions (mm)
A
B
H
K
N
EZG
0B
1B
2B
9
10
12
7.62
7.62
8
8
9
15.0
19.0
22.5
B
H
EZG
EZG
11
14
L
N
15 10.16
P15 P16
PCB drilling pattern (pages 160 and 163)
+
Note: Length «L» depends on the number of contacts, see page 163.
Add letter «B» at the end of the reference to order with integrated
harpoon pins (1.6 mm PCB thickness) (only for 0B and 1B series).
K
EYG Fixed socket for printed circuit, nut fixing, key (G) or keys (A…F) (back panel mounting)
Reference
Dimensions (mm)
Model Series
A
B
C
D
e
E
M
N
P
S1
12 10 12.5 7.62 M9x0.6 2.6 2.5 15.0 6.0 8.2
14 12 16.0 7.62 M11x0.5 5.0 3.5 19.0 10.0
20 15 19.5 10.16 M15x1.0 7.5 3.5 22.5 13.5 13.5
EYG
EYG
EYG
0B
1B
2B
–
N
L
9
P
B
D
S 1
M
P1
Panel cut-out 0B and 2B series (page 157)
Panel cut-out 1B series (page 157)
P10
P15 P16
PCB drilling pattern (pages 160 and 163)
+
Note: Length «L» depends on the number of contacts, see page 163.
Add letter «B» at the end of the reference to order with integrated
harpoon pins (1.6 mm PCB thickness) (only for 0B and 1B series).
E maxi
www.lemo.com
21
®
®
PHG Free socket, key (G) or keys (A…M and R), cable collet
Reference
Model Series
Dimensions (mm)
A
L
S1
S2
PHG
PHG
PHG
PHG
PHG
PHG
PHG
PHG
001)
0B
1B
XB
2B
3B
4B
5B
6.8 26.0 5.5
9.5 35.5 8.0
12.5 40.5 10.0
5
7
9
~L
13.0 46.0 11.0 10
16.5 47.0 13.0 12
19.0 56.0 15.0 14
26.0 73.0 21.0 20
36.0 99.0 31.0 30
S 2
S 1
M1
Cable assembly (page 169)
Note: 1) the surface design of the 00 series is different.
2)
PHG Free socket, key (G) or keys (A…M), cable collet and nut for fitting a bend relief
Reference
Dimensions (mm)
Model Series
A
L
S1
S2
PHG
PHG
PHG
PHG
PHG
PHG
PHG
001)
0B
1B
XB
2B
3B
4B
6.8 34.0 5.5
9.5 34.5 8.0
12.5 39.5 10.0
6
7
9
~L
13.0 49.5 11.0 10
16.5 46.0 13.0 12
19.0 54.5 15.0 15
26.0 69.0 21.0 20
S 2
S 1
M1
Cable assembly (page 169)
Note: 1) the surface design of the 00 series is different.
Note: 2) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
PNG Free socket, nut fixing, key (G) or keys (A…L and R), cable collet with lanyard release
Reference
Dimensions (mm)
S1
Model Series
A
B
L
N
S2
PNG
PNG
PNG
PNG
PNG
1B
2B
3B
4B
5B
12.4 18.4 40.5 140 10
16.5 22.5 47.0 160 13
19.0 26.0 56.0 190 15
26.0 33.0 73.0 230 21
36.0 43.0 99.0 300 31
9
~L
12
14
20
30
M1
Cable assembly (page 169)
S 2
S 1
Note: cable material: stainless steel with Polyamide sheath.
22
www.lemo.com
®
®
PKG Fixed socket, nut fixing, key (G) or keys (A…M and R), cable collet
Reference
Dimensions (mm)
Model Series
A
8
B
e
E
L
M
S1 S2 S3
PKG
PKG
PKG
PKG
PKG
PKG
PKG
00
0B
1B
2B
3B
4B
5B
10.2 M7x0.5 6.5 26.0 1.0 6.3
5
7
9
9
10 12.4 M9x0.6 7.0 35.5 1.2 8.2
14 15.8 M12x1.0 7.5 40.5 1.5 10.5
11
14
~L
S 3
M
18 19.2 M15x1.0 8.5 47.0 1.8 13.5 12 17
22 25.0 M18x1.0 11.5 56.0 2.0 16.5 14 22
28 34.0 M25x1.0 12.0 73.0 2.5 23.5 20 30
40 40.0 M35x1.0 11.0 99.0 3.0 33.5 30
–
S 2
E maxi
S 1
P1 Panel cut-out (page 157)
M1 Cable assembly (page 169)
Note: the 5B series is delivered with a tapered washer and a round nut.
PFG Fixed socket, with two nuts, key (G) or keys (A…M and R), cable collet (back panel mounting)
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
S1 S2 S3
PFG
PFG
PFG
PFG
PFG
PFG
PFG
00
0B
1B
2B
3B
4B
5B
10 10.2 M7x0.5 5.3 26.0 2.5 6.3
12 12.4 M9x0.6 5.0 35.5 2.5 8.2
16 15.8 M12x1.0 5.0 40.5 3.5 10.5
5
7
9
9
11
14
~L
S 3
M
20 19.2 M15x1.0 6.5 47.0 3.5 13.5 12 17
24 25.0 M18x1.0 9.0 56.0 4.5 16.5 14 22
30 34.0 M25x1.0 11.0 73.0 4.5 23.5 20 30
41 40.0 M35x1.0 10.0 99.0 5.0 33.5 30
–
S 2
E maxi
S 1
P1 Panel cut-out (page 157)
M1 Cable assembly (page 169)
Note: the 3B, 4B and 5B series are delivered with a conical nut.
The 5B series is delivered with a tapered washer and a round nut.
PEG Fixed socket, nut fixing, key (G) or keys (A…L), cable collet (back panel mounting)
~L
P
S 1
M
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
P
S1 S2 S4
PEG
PEG
3B
4B
24 25 M18x1.0 5.0 56 4.5 12 16.5 14 20
32 34 M25x1.0 12.5 73 5.0 20 23.5 20 27
S 2
S 4
E maxi
P1 Panel cut-out (page 157)
M1 Cable assembly (page 169)
Note: this model has an o-ring on the flange.
www.lemo.com
23
®
®
Rl l Fixed coupler, nut fixing, key (G) or keys (A and J) at the flange end and keys (J, K or M) at the other end
L
S 3
M
E maxi
S 1
Reference
Contacts
Type
Dimensions (mm)
Model Series
A
B
e
E
L
M
S1 S3
RGG1)
RGG2)
RJG
0B
0B
0B
0B
0B
0B
1B
1B
1B
2B
2B
3B
4B
female – female 12 13.8 M10x0.75 8.0 34 2.0 9.0 12
female – female 12 13.8 M10x0.75 8.0 43 2.0 9.0 12
G
J
RGG
RJG
G
G
J
male – female
female – male
female – male
female – male
12 13.8 M10x0.75 8.0 34 2.0 9.0 12
12 13.8 M10x0.75 8.0 34 2.0 9.0 12
12 13.8 M10x0.75 8.0 34 2.0 9.0 12
12 13.8 M10x0.75 8.0 34 2.0 9.0 12
RGJ
RAK
RGM
RGG3)
RJG
G
A
GJ
R
female – female 16 19.2 M14x1.00 8.5 47 2.5 12.5 17
K
RAK
male – female
female – male
male – female
female – male
female – male
female – male
16 19.2 M14x1.00 8.5 39 2.5 12.5 17
16 19.2 M14x1.00 8.5 39 2.5 12.5 17
20 21.5 M16x1.00 12.0 44 4.0 15.0 19
20 21.5 M16x1.00 12.0 44 4.0 15.0 19
25 27.0 M20x1.00 32.0 53 4.0 18.5 24
34 34.0 M25x1.00 50.0 65 4.0 23.5 30
RGJ
G
M
RGM
RJG
RGJ
Example
RGJ
RGJ
RGJ
Plug with key G
Plug with key J
Panel cut-out (page 157)
P4
N1)ote:
only available with two contacts.
2) RGG.0B only available from 3 till 5 contacts.
Alignment key see page 36.
3) RGG.1B only available till 7 contacts.
For this fixed coupler, the first contact type mentioned is always the one at the flange end. On request,
these couplers can be produced in other series, with other keys.
24
www.lemo.com
®
®
Elbow socket models
Technical Characteristics
Types
Materials and Treatment
Surface
Treat. (µm)
Component
Material
Cu Ni Au
–
PPS
Housing
Brass
0.5
0.5
0.5
3
3
3
–
3
–
–
–
Metallic parts
Earthing crown
Insulator
Brass
Bronze
PEEK
Series
Series
Type
1
1
1
2
2
Female contact
Bronze
0.5
1.5
1
2
0B, 1B
00
302
Note:
2
1
The surface treatment standards are as follows:
– Nickel: SAE AMS QQ N 290. – Gold: ISO 27874
2
1
0B, 1B
00
00
00
303
304
305
306
307
308
309
310
314
3
2
Electrical
3
2
3
2
1
1
1
4
3
0B, 1B
0B, 1B
0B, 1B
0B, 1B
1B
2
4
2
3
4
2
3
3
Model
Series
Types
00
0B, 1B
1
1
1
5
1
3
1
5
2
5
2
4
4
3
3
5
2
4
3
4
302-303-304-305
1.00
1.45
1.70
1.30
1.25
1.25
1.00
0.60
1.70
1.60
1.70
1.30
1.35
1.45
1.30
1.00
1.00
1.00
1.20
1.60
1.10
1.20
1.20
1.00
0.50
1.45
1.85
1.80
1.55
1.45
1.45
1.30
1.00
1.30
2.0
EPG-XBG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG-EXG
EPG
00
0B
0B
0B
0B
0B
0B
0B
1B
1B
1B
1B
1B
1B
1B
1B
1B
302
303
304
305
306
307
309
302
303
304
305
306
307
308
310
314
4.5
4.5
4.5
4.5
2.5
2.0
1.5
4.5
4.5
4.5
4.5
4.5
2.0
2.0
1.5
1.0
1
3
6
5
5
2
4
6
1
5
2
4
3
1
3
6
7
8
2
7
4
6
5
3
4
4
2
1
7
1
8
2
7
3
6
4
5
6
5
3
1
2
4
1
4
8
2
3
7
6
9
9
9
9
0B
5
8
1
7
2
5
4
6
3
1
8
5
2
3
7
6
10
12
1B
10
4
8
7
5
6
1 2 3 4 5
1
10
11
9
2
8
3
12 14
11
13
14
1B
13
7
4
5
6
10 9 8 7 6
Note:
1) see calculation method, caution and suggested standard on page 190.
Note:
numbering sequence shown is for female contacts (G keying),
for inverted contacts please contact factory.
P18
P19
PCB drilling pattern (page 165)
PCB drilling pattern (page 165)
www.lemo.com
25
®
®
EPG Elbow (90°) socket for printed circuit, key (G) or keys (A…F) (solder or screw fixing)
L
N
K
Dimensions (mm)
Part number
A
D
H
I
K
L
N
EPG.1B.314.NLN
11
21
7.7 14.3 19
36 15.4
ø 0.7
ø 0.6 M 1.6
P20
PCB drilling pattern (page 165)
D
Note: to replace the 4 ground pins by 4 screws (M1.6) add an «S» to the end of the
part number. (e.g.: EPG.1B.314.NLNS)
EPG Elbow (90°) socket for printed circuit, key (G) or keys (A…F) (solder, screw or harpoon fixing)
Dimensions (mm)
Part number
A
D
H
I
K
L
N
R
EPG.00.302.HLN
EPG.00.303.HLN
EPG.00.304.HLN
EPG.00.305.HLN
EPG.0B.302.HLN
EPG.0B.303.HLN
EPG.0B.304.HLN
EPG.0B.305.HLN
EPG.0B.306.HLN
EPG.0B.307.HLN
EPG.0B.309.HLN
EPG.1B.302.HLN
EPG.1B.303.HLN
EPG.1B.304.HLN
EPG.1B.305.HLN
EPG.1B.306.HLN
EPG.1B.307.HLN
EPG.1B.308.HLN
EPG.1B.310.HLN
6.8 11.5 3.5
7.0 8.7 19
7.1 5.08
9.0 14.6 6.7 12.6 13.3 25 11.7 7.62
L
N
K
D
ø 0.7
M 1.6
11.0 16.6 7.5 14.0 13.3 27 12.6 7.62
ø 0.5 (00)
ø 0.7 (0B-1B)
ø 2.2
Note: In the 0B and 1B series, it is possible to replace the 4
ground pins by 4 screws (M1.6) add an «S» to the end of the
part number. (e.g.: EPG.0B.307.HLNS).
A second alternative is to add an «B» at the end of the part
number (EPG.0B.307.HLNB), the connector is delivered with
integrated harpoon pins for rapidly assembly (1.6 mm PCB
thickness).
P18
P19
PCB drilling pattern 00 series (page 165)
PCB drilling pattern 0B, 1B series (page 165)
26
www.lemo.com
®
®
EXG Elbow (90°) socket for printed circuit with two nuts, key (G) or keys (A…F) (solder, screw or harpoon fixing)
(back panel mounting)
XBG Elbow (90°) socket fixing nut for printed circuit, key (G) or keys (A, B) (back panel mounting)
Dimensions (mm)
Part number
A
B
D
e
E
H
I
K
L
M
N
R S3
XBG.00.302.HLN
XBG.00.303.HLN
XBG.00.304.HLN
EXG.0B.302.HLN
EXG.0B.303.HLN
EXG.0B.304.HLN
EXG.0B.305.HLN
EXG.0B.306.HLN
EXG.0B.307.HLN
EXG.0B.309.HLN
EXG.1B.302.HLN
EXG.1B.303.HLN
EXG.1B.304.HLN
EXG.1B.305.HLN
EXG.1B.306.HLN
EXG.1B.307.HLN
EXG.1B.308.HLN
EXG.1B.310.HLN
10 10.2 11.5 M7x0.5 2.1 3.5 7.0 8.7 19 2.5 7.1 5.08 9
12 12.4 14.6 M9x0.6 4.5 6.7 12.6 13.3 25 2.5 11.7 7.62 11
K
L
S 3
M
14 15.0 16.6M11x0.5 4.5 7.5 14.0 13.3 27 3.5 12.6 7.62 13
E maxi
D
M 1.6
ø 0.5 (00)
ø 0.7 (0B-1B)
ø 2.2
Note: In the 0B and 1B series, it is possible to replace the 4
ground pins by 4 screws (M1.6) add an «S» to the end of the
part number. (e.g.: EXG.0B.307.HLNS).
A second alternative is to add an «B» at the end of the part
number (EXG.0B.307.HLNB), the connector is delivered with
integrated harpoon pins for rapidly assembly (1.6 mm PCB
thickness).
P2 Panel cut-out 00, 0B series (page 157)
P10 Panel cut-out 1B series (page 157)
P18 PCB drilling pattern 00 series (page 165)
P19 PCB drilling pattern 0B, 1B series (page 165)
www.lemo.com
27
®
®
Plastic housing models
These connectors are particularly recommended for all applications requiring maximum electrical insulation when mated. The
design, including a latch sleeve and a metal earthing crown, guarantees EMC screening efficiency to meet most requirements.
Technical Characteristics
Mechanical and Climatical
Value
Characteristics
Standard
PEEK
PSU
PPSU
cream
> 5000 cycles
Colour
natural (beige)
white or grey
–
Endurance1)
> 5000 cycles
> 5000 cycles
IEC 60512-5 test 9a
Humidity
up to 95% at 60° C
–
Temperature range
Sterilization resistance2)
Resistance to solvents
- 50° C/+ 250° C - 50° C/+ 150° C - 50° C/+ 180° C
–
> 200 cycles
very good
~20 cycles
limited
> 100 cycles
good
IEC 60601-1 § 44.7
–
Note: 1) see page 189, contact resistance after mating cycles. See page 185, mechanical endurance latching force. 2) Steam sterilization.
FGG Straight plug, key (G or J), cable collet, PEEK outer shell
~L
~M
Reference
Dimensions (mm)
Model Series
A
L
M
S2
8
FGG
FGG
FGG
FGG
0B
1B
3B
4B
11.0 37.4 27.4
13.5 43.0 32.0 10
19.0 62.0 47.0 15
26.0 78.5 60.5 20
S 2
Cable assembly (page 169)
M1
1)
FGG Straight plug, key (G or J), cable collet, PEEK outer shell and nut for fitting a bend relief
~L
~M
Reference
Dimensions (mm)
S2
Note on availability
Model Series
A
L
M
FGG
FGG
1B
4B
13.5 42.2 31.2 10 for all collet type
S 2
26.0 83.2 65.2 20 only from collet M82 and up
Cable assembly (page 169)
M1
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
28
www.lemo.com
®
®
FGY Straight plug, keys (Y), cable collet and PSU or PPSU outer shell
~L
Reference
Dimensions (mm)
S2
~M
Model Series
A
L
M
FGY
FGY
FGY
2B
3B
4B
16.5 50.5 39.5 13
19.0 58.0 43.0 15
26.0 76.2 58.2 20
S 2
Cable assembly (page 169)
M1
1)
FGY Straight plug, keys (Y), cable collet and PSU or PPSU outer shell and nut for fitting a bend relief
Reference
Dimensions (mm)
S2
Note on availability
~L
Model Series
A
L
M
~M
FGY
FGY
FGY
2B
3B
4B
16.5 49.5 38.5 13 only for collet M42 and up
19.0 56.5 41.5 15 only for collet D62 and up
26.0 74.4 56.4 20 only for collet D82 and up
S 2
Cable assembly (page 169)
M1
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
ENG Fixed socket with earthing tag, nut fixing, key (G or J), PEEK outer shell
Reference
Dimensions (mm)
L maxi
Model Series
A
B
e
E
L
M
N1) S1 S3
N
ENG
ENG
ENG
ENG
0B
1B
3B
4B
11 12.5 M9x0.6 6.4 20.7 1.8 16.5 8.2 11
14 15.8 M12x1.0 7.5 23.0 1.5 21.1 10.5 14
22 25.0 M18x1.0 11.5 30.7 2.0 28.1 16.5 22
28 34.0 M25x1.0 12.0 35.7 2.5 32.6 23.5 30
S 3
M
E maxi
S 1
Panel cut-out (page 157)
P1
Note: 1) maximum length with crimp contacts.
ENY Fixed socket with earthing tag, nut fixing, keys (Y), PSU or PPSU outer shell
Reference
Dimensions (mm)
L maxi
Model Series
A
B
e
E
L
M
N1) S1 S3
N
ENY
ENY
ENY
2B
3B
4B
18 19.2 M15x1.0 8.5 26.7 1.8 24.6 13.5 17
22 25.0 M18x1.0 11.5 30.7 2.0 28.1 16.5 22
28 34.0 M25x1.0 12.0 35.7 2.5 32.6 23.5 30
S 3
M
Panel cut-out (page 157)
P1
E maxi
S 1
Note: 1) maximum length with crimp contacts.
Other models with plastic outer shell are available on request.
www.lemo.com
29
®
®
Watertight or vacuumtight models
These plug, socket and coupler models allow the device on which they are fitted to reach a protection index of IP68 as
per IEC 60529. They are fully compatible with plugs of the same series and are widely used for portable radios, military,
laboratory equipment, aviation, etc.
These models are identified by a letter «P» at the end of the reference.
Most of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at
the end of the part number (certificate on request).
Epoxy resin is used to seal these models.
Technical Characteristics
Mechanical and Climatical
Characteristics
Endurance1)
Value
Standard
Characteristics
Value
60 bar
Standard
> 5000 cycles
IEC 60512-5 test 9a
00
0B
1B
2B
3B
4B
5B
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
Humidity
up to 95% at 60° C
60 bar
60 bar
40 bar
30 bar
15 bar
5 bar
00 to 1B
2B to 5B
- 20° C/+ 100° C
- 20° C/+ 80° C
Temperature range
Maximum operating
pressure3)
Salt spray corrosion test4)
Climatical category
> 1000h
20/80/21
IEC 60512-6 test 11f
IEC 60068-1
Leakage rate (He)2)
< 10-7 mbar.l.s-1 IEC 60512-7 test 14b
Note: 1) see page 189, contact resistance after mating cycles. See page 185, mechanical endurance latching force.
2) only for vacuumtight models. Residual traces of grease used during (He) leak testing are on the o-ring. Please contact us for further details.
3) this value corresponds to the maximum allowed pressure difference for the assembled socket. 4) for chrome plated product («C» material code).
YHG Fixed plug, nut fixing, non-latching, key (G) or keys (A…M)
Reference
Dimensions (mm)
L maxi
Model Series
A
B
e
E
L
M
S1 S3
S 3
M
YHG
YHG
YHG
YHG
0B
1B
2B
3B
13 12.4 M9x0.6 2.4 24.1 14.2 8.2 11
16 15.8 M12x1.0 3.9 28.0 16.2 10.5 14
19 19.2 M15x1.0 5.5 33.1 17.8 13.5 17
22 25.0 M18x1.0 5.1 38.2 22.2 16.5 22
S 1
E maxi
P9
Panel cut-out (page 157)
Note: this model does not include an O-ring behind the flange, it ensures
only IP61 protection index. Consequently, it is not vacuumtight. Water-
tightness (when mated) is only ensured with HHG and HCG sockets.
30
www.lemo.com
®
®
HGG Fixed socket, nut fixing, key (G) or keys (A…M and R), watertight or vacuumtight
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
S1 S3
HGG
HGG
HGG
HGG
HGG
HGG
HGG
00
0B
1B
2B
3B
4B
5B
11 10.2 M7x0.5 8.0 18.0 1.5
–
9
L maxi
13 12.4 M9x0.6 7.0 21.5 3.0 8.2 11
18 15.8 M12x1.0 7.0 26.6 4.5 10.5 14
20 19.2 M15x1.0 8.0 31.6 4.0 13.5 17
25 25.0 M18x1.0 11.5 36.1 4.0 16.5 22
34 34.0 M25x1.0 11.0 43.1 4.0 23.5 30
S 3
M
E maxi
S 1
45 40.0 M35x1.0 11.0 53.6 5.0 33.5
–
Panel cut-out (page 157)
P9
Note: the 5B series is delivered with a tapered washer and a round nut.
HNG Fixed socket, nut fixing, with earthing tag, key (G) or keys (A…M), watertight or vacuumtight
L maxi
S 3
M
Reference
Dimensions (mm)
S 1
E maxi
Model Series
A
B
e
E
7
L
M
3
S1 S3
8.2 11
HNG
0B
13 12.4 M9x0.6
21.5
Panel cut-out (page 157)
P9
HHG Fixed socket, nut fixing, key (G) or keys (A…M), watertight or vacuumtight (watertight when mated)
Reference
Dimensions (mm)
L maxi
S 3
M
Model Series
A
B
e
E
L
M
S1 S3
HHG
HHG
HHG
HHG
0B
1B
2B
3B
13 12.4 M9x0.6 7.0 24.5 4.8 8.2 11
18 15.8 M12x1.0 7.0 30.3 5.2 10.5 14
22 19.2 M15x1.0 8.0 35.6 6.0 13.5 17
25 25.0 M18x1.0 11.5 41.3 7.2 16.5 22
E maxi
S 1
Panel cut-out (page 157)
P9
Note: this model ensures watertightness (IP66) in the mating area when
mated with FGG or similar plug.
www.lemo.com
31
®
®
HCG Fixed socket, nut fixing, key (G) or keys (A…M), watertight or vacuumtight (watertight when mated)
(back panel mounting)
L maxi
P
F maxi
Reference
Dimensions (mm)
e1
M
Model Series
A
B
C
e
E
F
L
M
P
S1
18 18 12.0 M14x1.0 M9x0.6 3.9 1.0 24.5 3.5 7.5 12.5
20 20 14.5 M16x1.0 M12x1.0 6.2 2.0 30.3 3.5 10.0 14.5
24 24 17.5 M19x1.0 M14x1.0 6.7 1.5 35.6 3.5 11.3 17.0
HCG
HCG
HCG
0B
1B
2B
S 1
E maxi
Panel cut-out (page 157)
P3
Note: this model ensures watertightness (IP66) in the mating area when mated with
FGG or similar plug.
HEG Fixed socket, nut fixing, key (G) or keys (A…M), watertight or vacuumtight (back panel mounting)
L maxi
P
Reference
Dimensions (mm)
S2 S1
M
Model Series
A
B
e
E
L
M
P
S1 S2
HEG
HEG
HEG
HEG
00
0B
1B
2B
10 11
12 13
M7x0.5 2.5 18.2 2.5 6.0 6.3
M9x0.6 5.5 21.5 2.5 9.0 8.2
–
–
–
16 18 M12x1.0 6.5 26.6 3.5 11.0 10.5
E maxi
20 20 M15x1.0 5.0 31.6 3.5 9.6 13.5 15
Panel cut-out (page 157)
P9
HMG Fixed socket with earthing tag, nut fixing, key (G) or keys (A…M), watertight or vacuumtight
(back panel mounting)
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
P
S1
L maxi
S1
P
HMG
HMG
HMG
HMG
HMG
00
10 11
12 13
M7x0.5 2.5 18.0 2.5 6.0 6.3
M9x0.6 5.5 21.5 2.5 9.0 8.2
M
0B
1B
2B1)
3B
16 18 M12x1.0 5.5 26.6 3.5 11.0 10.5
20 20 M15x1.0 5.5 31.6 3.5 9.6 13.5
24 25 M18x1.0 7.5 36.1 4.5 14.0 16.5
E maxi
Panel cut-out (page 157)
P9
Note: 1) the surface design of the 2B series is different.
Note: The 3B series is delivered with a conical nut and without washer.
32
www.lemo.com
®
®
Sl l Fixed coupler, nut fixing, key (G) or keys (A, B, J, K and L) at the flange end and key (G)
or keys (A, B, J, K and L) at the other end, watertight or vacuumtight
L
S 3
S 1
M
E maxi
Reference
Contacts
Dimensions (mm)
Model Series
Type
A
B
e
E
L
M
S1 S3
female – male
male – female
female – male
male – female
female – male
male – female
female – male
male – female
female – male
female – male
female – male
female – male
female – male
male – female
female – male
male – female
male – female
male – female
female – male
female – male
14 13.8 M10x0.75 17 34 2.0 9.0 12
14 13.8 M10x0.75 17 34 2.0 9.0 12
17 15.8 M12x1.00 28 39 2.5 10.5 14
17 15.8 M12x1.00 28 39 2.5 10.5 14
20 21.5 M16x1.00 25 44 4.0 15.0 19
20 21.5 M16x1.00 25 44 4.0 15.0 19
25 27.0 M20x1.00 30 53 4.0 18.5 24
25 27.0 M20x1.00 30 53 4.0 18.5 24
25 27.0 M20x1.00 30 53 4.0 18.5 24
25 27.0 M20x1.00 30 53 4.0 18.5 24
34 34.0 M25x1.00 50 65 4.0 23.5 30
34 34.0 M25x1.00 50 65 4.0 23.5 30
34 34.0 M25x1.00 50 65 4.0 23.5 30
34 34.0 M25x1.00 50 65 4.0 23.5 30
SGJ
SJG
SGJ
SJG
SGJ
SJG
SGJ
SJG
SAK
SBL
SAK
SBL
SGJ
SJG
SGJ
SJG
SKA
SLB
SAK
SBL
0B
0B
1B
1B
2B
2B
3B
3B
3B
3B
4B
4B
4B
4B
5B
5B
5B
5B
5B
5B
G
J
SGJ
SJG
SKA
SLB
SAK
J
G
A
B
K
L
K
L
A
B
S
BL
45 40.0 M35x1.00 58 80 5.0 33.5
45 40.0 M35x1.00 58 80 5.0 33.5
45 40.0 M35x1.00 58 80 5.0 33.5
45 40.0 M35x1.00 58 80 5.0 33.5
45 40.0 M35x1.00 58 80 5.0 33.5
45 40.0 M35x1.00 58 80 5.0 33.5
–
–
–
–
–
–
Example
SGJ
Plug with key G
Plug with key J
Panel cut-out (page 157)
P4
P9
Alignment key see page 36.
Panel cut-out 1B series (page 157)
Note: The 5B series is delivered with a round nut.
Note: for this fixed coupler, the first contact type mentioned is always the one at the flange end. On
request these couplers can be produced in other series, with other keys.
www.lemo.com
33
®
®
Bridge models
Technical Characteristics
Mechanical and Climatical
Electrical
Characteristics
Endurance1)
Working temperature
Value
Standard
Characteristics
Value
< 6 mΩ
Standard
> 1000 cycles
IEC 60512-5 test 9a
Contact resistance
IEC 60512-2 test 2a
maximum 90° C
Note: 1) see page 189, contact resistance after mating cycles. See page
185, mechanical endurance latching force.
Part number
Materials and Treatment
Surface treat. (µm)
CFF.0B.302.PLCG
CRG.0B.302.PLEG
CFF.0B.303.PLCG
CRG.0B.303.PLEG
CRG.0B.306.PLEG
CFF.1B.303.PLCG
CRG.1B.303.PLEG
CFF.1B.306.PLCG
CRG.1B.306.PLEG
0B
l
l
l
l
–
–
–
1.05
4
4
4
4
2
5
5
3
3
Component
Plastic housing
Material
Polyamide
Cu Ni Cr Au
–
0B
0B
0B
0B
1B
1B
1B
1B
1.05
0.80
0.80
0.40
1.25
1.25
0.80
0.80
–
Brass
Brass
PEEK
Brass
Bronze
0.5
0.5
3
3
–
–
–
Metallic parts
–
0.3
l
Insulator
–
l
l
–
–
Male contact
Female contact
0.5
0.5
3
3
–
–
1.0
1.5
–
l
Note: the surface treatment standards are as follows:
–
l
– Nickel: SAEꢀAMSꢀQQꢀNꢀ290, chrome: SAEꢀAMSꢀ2460, gold: ISO 27874
Note: the last letter of the part number indicates the colour of the housing.
Ex. G (standard) is grey. To obtain another colour, replace this letter by
the letter corresponding to the selected colour (see table on page 72).
Note:
1) lowest measured value; contact to contact or contact to shell.
2) see calculation method, caution and suggested standard on page 190.
CFF Bridge plug with two non-latching plugs
CRG Bridge plug with two non-latching plugs, and monitoring socket, key (G) or keys (A…M)
CFF
CRG
M maxi
A
Dimensions (mm)
Model
Series
A
B
H
L
M
N
CFF-CRG
CFF-CRG
0B
1B
13.5 14 27.5 37.2 27.2 22.5
15.0 20 35.0 42.0 31.0 22.0
Note: in order to provide the user with a coding system, the bridge plug
housing, the double panel washers and the bend reliefs are available in
nine colours.
L maxi
34
www.lemo.com
®
®
Threaded-latching models
FVG Straight plug, key (G) or keys (B), cable collet
~L
~M
Reference
Dimensions (mm)
Model Series
A
9
L
M
S1
5
S2
8
FVG
00
28.5 24
S1
S2
Note: to be ordered with nut for fitting a bend relief to obtain the rating
IP 64.
ESG Fixed socket with two round nuts, key (G) or keys (B), long threaded shell (back panel mounting)
L maxi
N
M
3.2 mini 1)
Reference
Dimensions (mm)
Model Series
A
9
B
9
C
e
E
L
M
2
N
9.5 M7x0.5 3.2 15.5
13.7
ESG
00
Panel cut-out (page 157)
P2
E maxi
Note: 1) minimum length of free thread to ensure mating.
FVB Straight plug, keys (B), short shell for special cable crimping and for fitting a bend relief
L
Reference
Dimensions (mm)
M
Model Series
A
9
L
M
FVB
00
20 15.4
Note: part number for microphone applications: FVB.00.303.NLAE24.
After assembly the special bend relief GMF.00.018.Dl (to be ordered
separately) is to be fitted.
XRB Elbow (90°) socket for printed circuit, keys (B), short shell with one nut, screw fixing (back panel mounting)
1.2
2.05
L
Reference
Dimensions (mm)
P
M
3.2 mini 1)
Model Series
A
e
I
L
M
P
7
10 M7x0.5
7
14 2.5
XRB
00
Panel cut-out (page 157)
P2
PCB drilling pattern for contact only (page 165)
P18
2 x M 1.4
Note: 1) minimum length of free thread to ensure mating.
www.lemo.com
35
®
®
Alignment Key (B series)
Alignment Key and Polarized Keying System
B series connector model part numbers are composed of three letters. The LAST LETTER indicates the key position and
the contact type (male or female).
Front view of a socket
Series
0B
Series
Contact type
Nb of
keys
Nb of
keys
Ref.
Ref.
Note
00
1B
XB
0°
2B
0°
3B
0°
4B
0°
5B
Plug
Socket
G
A
B
C
D
E
F
1
2
2
2
2
2
2
2
2
2
2
3
3
–
α
α
α
β
β
β
γ
0°
30°
60°
–
0°
0°
G
A
B
C
D
E
F
1
2
2
2
2
2
2
2
2
2
2
3
3
–
α
α
α
γ
0°
male
male
male
male
male
male
male
female
female
female
female
female
female
female
male
l
30°
60°
90°
30°
60°
90°
30° 30°
30° 30°
45° 45°
60° 60°
95° 95°
30°
45°
60°
95°
l
α
–
–
–
45°
60°
95°
l
l
–
135° 135°
145° 145°
155° 155°
l
β
β
α
α
γ
–
120° 120° 120° 120° 120°
l
–
–
–
–
–
–
–
–
145° 145° 145° 145°
l
J
45°
–
45°
70°
80°
110°
–
45°
70°
80°
–
J
37.5° 37.5° 37.5° 37.5° female
52.5° 52.5° 52.5° 52.5° female
l
γ
γ
K
L
K
L
male
l
γ
–
70°
–
70° 70°
70° female
male
l
δ
M
–
M
–
β
γ
–
–
–
–
–
female
male
male
l
–
–
–
–
112.5° 126° 112.5°
100° 102° 147.5°
female
female
l1)
l1)
Y
Y
–
–
–
male
Front view of a socket
Series
0B
Series
Contact type
Nb of
keys
Nb of
keys
Ref.
Ref.
Note
00
1B
XB
2B
3B
4B
5B
Plug
Socket
α
β
γ
α
β
γ
5
5
5
5
–
–
–
–
–
–
–
–
–
–
–
–
5
5
5
5
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
95°
115°
20°
male
male
male
male
female
female
female
female
l
l
l
l
R
R
δ
δ
30°
Note: FTG, FGY, ENY models are not available with all the keys. Please consult pages corresponding to these models.
For Rll models see explanation on page 24 and for Sll models see explanation on page 33.
Note: 1) only FGY and ENY models are available.
l First choice alternative
l Special order alternative
36
www.lemo.com
ꢀ
ꢀ
K Series
K series connectors have been specifically designed for outdoor applications.
They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug,
free socket, fixed socket or coupler. All models of this series are watertight when mated to give a protection index of IP68
as per IEC 60529 standard (in mated condition) when correctly assembled to an appropriate cable (IP66 otherwise).
K series connectors have the same insulators as the B series and have the following main features:
– security of the Push-Pull latching system
– multipole types 2 to 64 contacts
– watertight connection (IP 68/IP 66)
– solder, crimp or print (straight or elbow) contacts
– multiple key options to avoid cross mating
of similar connectors
– keying system («G» key standard)
for connector alignment
– 360° screening for full EMC shielding
– rugged housing for extreme working conditions.
– high packing density for space savings
Metal housing models (page 39)
Fixed plugs
Straight plugs
Fixed sockets
Free sockets
Free coupler
ꢀGG
PꢁG
TGL*
EGG
EBG
EꢂG
EꢁG
EꢆG*
ꢀꢅG
T-plug
with sockets (90°)
ꢀAG
ꢀGG
ꢀGG
ꢀꢃG
PꢁG
EꢃG
EEG
EEG
EEG
Elbow plug
PꢁG
ꢀTG*
ꢀPG
ꢀꢁG
Fixed sockets
PKG
PBG
Watertight or vacuumtight models (page 47)
Fixed sockets
Fixed coupler
PEG
Note: * Contact LEMO for details.
ꢁEG
ꢁMG
ꢁGG
ꢄ••
www.lemo.com
37
®
®
Part Numbering System
F G G 3 K 3 1 0 C L A C 6 5
Plug
.
.
.
P H G 3 K 3 1 0 C L L C 6 5
Free socket
.
.
.
Z
Variant: (page 71)
Cable ø: (page 68)
Collet type: (page 68)
Fixed socket
Coupler
E G G 3 K 3 1 0 C Y M
. . .
S L G 3 K 3 1 0 T L A PV
.
.
.
Model: (page 39)
Variant: (page 71)
Contact: (page 64)
Insulator: (page 64)
Housing: (page 64)
Alignment key: (page 49)
Series: (page 39)
Insert configuration: (page 57)
FGG.3K.310.CLAC65 = straight plug with key (G) and cable collet, 3K series, multipole type with 10 contacts, outer shell in chrome-plated
brass, PEEK insulator, male solder contacts, C type collet for 6.5 mm diameter cable.
PHG.3K.310.CLLC65Z = free socket with key (G) and cable collet, 3K series, multipole type with 10 contacts, outer shell in chrome-plated
brass, PEEK insulator, female solder contacts, C type collet for 6.5 mm diameter cable and nut for fitting a bend relief.
EGG.3K.310.CYM = fixed socket, nut fixing, with key (G), 3K series, multipole type with 10 contacts, outer shell in chrome-plated brass,
PEEK extended insulator, female crimp contacts.
SLG.3K.310.TLAPV = fixed coupler, nut fixing, keys (L) on the flange end and key (G) at the other end, 3K series, multipole type with
10 contacts, outer shell in stainless steel, PEEK insulator, male-female contacts, vacuumtight.
Part Section Showing Internal Components
Straight plug
outer shell
1
2
Fixed socket
latch sleeve
inner shell
6
4
1
9
5
2
3
4
7
7
1
6
8
2
3
7
11
10
5
3
outer shell
1
2
3
4
5
6
7
retaining ring
collet nut
4
earthing crown
retaining ring
hexagonal nut
insulator
5
6
split insert carrier
insulator
7
male contact
earthing cone
collet + washer 1)
8
female contact
o-ring
9
10
11 gasket
Note: 1) depending on models.
38
www.lemo.com
®
®
Metal housing models
Technical Characteristics
Mechanical and Climatical
Electrical
Characteristics
Endurance1)
Value
> 5000 cycles
Standard
Characteristics
Value
Standard
IEC 60512-5 test 9a
at 10 MHz
at 1 GHz
> 95 dB
> 80 dB
IEC 60169-1-3
IEC 60169-1-3
Shielding
efficiency
Humidity
up to 95% at 60° C
Temperature range2)
Resistance to vibrations
Shock resistance
- 55° C, + 200° C
Note:
the various tests have been carried out with FGG and EGG connector
pairs, with chrome-plated brass shell, PEEK insulator and silicone O-ring.
Detailed electrical characteristics, as well as materials and treatment are
presented in the chapter Technical Characteristics on page 182.
10-2000 Hz, 15g IEC 60512-4 test 6d
100 g, 6 ms
> 1000h
IEC 60512-4 test 6c
IEC 60512-6 test 11f
IEC 60529
1)
see page 189, contact resistance after mating cycles. See page 185,
Salt spray corrosion test4)
Protection index (mated)3)
Climatical category
mechanical endurance latching force.
2)
minimum operating temperature is -20°C for sockets fitted with an FPM
IP 68/IP 66
50/175/21
®
(Viton ) O-ring.
3)
IP68 achieved providing that the cable is perfectly circular and that
IEC 60068-1
assembly process ensures a high integrity seal.
4)
for chrome plated product («C» material code).
FGG Straight plug, key (G) or keys (A to F, L and R), cable collet
Reference
Model Series
Dimensions (mm)
A
L
M
S2
~L
FGG
FGG
FGG
FGG
FGG
FGG
0K
1K
2K
3K
4K
5K
11
13
16
19
25
38
34 23.0
42 28.0
8
9
~M
52 36.0 12
61 41.0 15
71 50.5 19
92 67.0 30
S 2
M1
Cable assembly (page 172)
1)
FGG Straight plug, key (G) or keys (A to F, L and R), cable collet and oversize cable collet
Reference
Dimensions (mm)
Model Series
A
B
L
M
S1
S2
FGG
FGG
FGG
FGG
1K
2K
3K
4K
13 14.5 60.0 46
16 17.0 68.0 52
19 22.0 85.0 65
25 36.0 119.5 99
12
15
19
30
12
15
19
32
~L
~M
M2
Cable assembly (page 173)
Note: 1) correspond to K type of collet, the fitting of oversize collets onto
this model allows them to be fitted to the cables that can be accommodated
by the next housing size up (see page 68).
S 2
S 1
www.lemo.com
39
®
®
1)
FGG Straight plug, key (G) or keys (A to F, L and R),cable collet and nut for fitting a bend relief
Reference
Dimensions (mm)
Model Series
A
L
M
S2
FGG
FGG
FGG
FGG
FGG
0K
1K
2K
3K
4K
11
13
16
19
25
34 23.0
42 28.0
7
9
~L
~M
52 36.0 12
60 40.0 15
71 50.5 19
S 2
Cable assembly (page 172)
M1
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
FNG Straight plug, key (G) or keys (A to F and L), cable collet and lanyard release
~L
Reference
Dimensions (mm)
~M
Model Series
A
B
L
M
N
S2
FNG
FNG
2K
4K
16
25
22
32
52 36.0 160 12
71 50.5 230 19
Cable assembly (page 172)
M1
S 2
Note: cable material: stainless steel with Polyamide sheath
FXG Fixed plug with round flange, key (G) or keys (A to F, L and R) and screw fixing
Reference
Dimensions (mm)
Model Series
A
B
G
H
L
M
P
S2
~ L
FXG
FXG
FXG
3K
4K
5K
38 22.5 3.4 20.6 61 10.0 30.0 15
47 28.5 3.4 27.0 71 11.0 32.0 19
65 42.5 4.4 38.0 100 12.5 38.5 30
P
M
H
ø G
Panel cut-out (page 159)
P6
Note: this model does not include an O-ring behind the flange, it allows
the device on which it is fitted to reach only IP50 protection index.
It does not have a cable collet.
S 2
40
www.lemo.com
®
®
FAG Fixed plug, nut fixing, non-latching, key (G) or keys (A to F, L and R)
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
N1) S1 S3
L maxi
N
FAG
FAG
FAG
FAG
FAG
1K
2K
3K
4K
5K
20 21.5 M16x1.0 2.3 22.6 16.0 22.5 14.5 19
25 27.0 M20x1.0 4.5 33.6 18.0 28.3 18.5 24
31 34.0 M24x1.0 4.0 34.3 22.5 33.8 22.5 30
37 40.5 M30x1.0 4.0 35.3 23.0 36.3 28.5 36
S 3
M
55 54.0 M45x1.5 4.0 43.5 28.5 42.3 42.5
–
Panel cut-out (page 159)
P1
S 1
E maxi
Note: The 1K series is delivered with a locking washer.
The 5K series is delivered with a round nut.
Note: 1) maximum length with crimp contacts.
FPG Elbow (90°) plug, key (G) or keys (A to F, L and R), cable collet
~L
S 1
~M
Reference
Dimensions (mm)
Model Series
A
D
H
L
M
S1
S2
S3
S 3
FPG
FPG
FPG
0K
1K
2K
11
13
7.3 25
8.7 33
36
42
51
25
28
35
9
8
9
8
S 2
11
14
10
13
D
16 10.2 40
12
Cable assembly (page 172)
M3
FHG Elbow (90°) plug, key (G) or keys (A to F, L and R), cable collet
~L
S 1
~M
Reference
Dimensions (mm)
S1
S 3
Model Series
A
D
H
L
M
S2
S3
S 2
FHG
FHG
3K
4K
21.0 11.5 47
27.5 15.5 57
60 40.0 18
72 51.5 24
15
19
15
20
D
Cable assembly (page 172)
M3
www.lemo.com
41
®
®
EGG Fixed socket, nut fixing, key (G) or keys (A to F, L and R)
Reference
Model Series
Dimensions (mm)
A
B
e
E
L
M
N1) S1 S3
L maxi
N
EGG
EGG
EGG
EGG
EGG
EGG
0K
1K
2K
3K
4K
5K
18 19.2 M14x1.0
20 21.5 M16x1.0
25 27.0 M20x1.0
6
9
9
21.7 4.0 20.1 12.5 17
27.0 4.5 25.1 14.5 19
30.7 5.0 28.6 18.5 24
S 3
M
31 34.0 M24x1.0 11 36.2 6.0 33.6 22.5 30
37 40.5 M30x1.0 40.2 6.5 38.6 28.5 36
55 54.0 M45x1.5 10 47.5 9.0 43.6 42.5
9
–
E maxi
S 1
Panel cut-out (page 159)
P1
Note: The 5K series is delivered with a round nut.
Note: 1) maximum length with crimp contacts.
ENG Fixed socket, nut fixing, key (G) or keys (A to F, L and R) and earthing tag
L maxi
N
S 3
M
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
6
N1) S1 S3
33.6 22.5 30
ENG
3K
31 34 M24x1.0 11.3 36.2
E maxi
S 1
Panel cut-out (page 159)
P1
Note: 1) maximum length with crimp contacts.
EEG Fixed socket, nut fixing, key (G) or keys (A to F, L and R) (back panel mounting)
Reference
Dimensions (mm)
L maxi
Model Series
A
B
e
E
L
M
N1)
P
S1
N
EEG
EEG
EEG
EEG
EEG
0K
1K
2K
3K
4K
18.0 18 M14x1.0 3.4 21.7 3.5 20.1 7.0 12.5
20.0 20 M16x1.0 6.2 27.0 3.5 25.1 10.0 14.5
25.0 25 M20x1.0 5.0 30.7 3.5 28.6 10.0 18.5
30.0 31 M24x1.0 7.5 36.2 4.5 33.6 12.0 22.5
41.5 37 M30x1.0 6.0 40.2 7.0 38.6 13.5 28.5
P
S 1
M
Panel cut-out (page 159)
P1
E maxi
Note: The 3K and 4K series are delivered with a conical nut.
Note: 1) maximum length with crimp contacts.
42
www.lemo.com
®
®
EEG Fixed socket, nut fixing, key (G) or keys (A to F and R) with straight print contacts for printed circuit
(back panel mounting)
Reference
Dimensions (mm)
Model Series
A
B
e
E
M
N
P
S1
L
EEG
EEG
EEG
EEG
EEG
0K
1K
2K
3K
4K
18.0 18 M14x1.0 3.4 3.5 17.6 7.0 12.5
20.0 20 M16x1.0 6.2 3.5 23.8 10.0 14.5
25.0 25 M20x1.0 5.0 3.5 25.8 10.0 18.5
30.0 31 M24x1.0 7.5 4.5 31.3 12.0 22.5
41.5 37 M30x1.0 6.0 7.0 34.3 13.5 28.5
N
P
S 1
M
Panel cut-out (page 159)
P1
E maxi
PCB drilling pattern (page 160)
P15
Note: The 3K and 4K series are delivered with a conical nut.
ll
Note: this contact type is available for E socket models fitted with female
contact.
Length «L» depends on the number of contacts, see table page 163.
EEG Fixed socket, nut fixing, key (G) or keys (A to F and R) with elbow (90°) contacts for printed circuit
(back panel mounting)
L
Reference
Dimensions (mm)
N
P
Model Series
A
B
e
E
M
N
P
7
S1
S 1
M
EEG
EEG
EEG
EEG
0K
1K
2K
3K
18 18 M14x1.0 3.4 3.5 19.3
12.5
20 20 M16x1.0 6.2 3.5 24.3 10 14.5
25 25 M20x1.0 5.0 3.5 26.6 10 18.5
30 31 M24x1.0 7.5 4.5 31.3 12 22.5
E maxi
Panel cut-out (page 159)
P1
PCB drilling pattern (page 164)
P17
2
Note: length «L» depends on the number of contacts, see PCB drilling
pattern page 164.
Note: The 3K series is delivered with a conical nut.
EBG Fixed socket with square flange, key (G) or keys (A to F, L and R) and screw fixing
L
N
A
H
M
Reference
Dimensions (mm)
Model Series
A
B
F
G
H
L
M
N1)
EBG
EBG
EBG
3K
4K
5K
29
37
54
23
30
45
3
3
4
3.4
3.4
4.4
23 36.2 6.0 32.6
29 40.2 6.5 36.6
44 47.5 8.0 42.1
F
ø G
Panel cut-out (page 159)
P7
Note: 1) maximum length with crimp contacts.
www.lemo.com
43
®
®
EDG Fixed socket with square flange, key (G) or keys (A to F, L and R), protruding shell and earthing tag,
screw fixing
L
N
A
M
H
Reference
Dimensions (mm)
Model Series
A
B
C
F
3
G
H
L
M
N1)
EDG
3K
29
18
23
3.4 23 36.2 22.5 32.6
ø G
F
Panel cut-out (page 159)
P7
Note: 1) maximum length with crimp contacts.
EHG Fixed socket, nut fixing, key (G) or keys (A to F and L), protruding shell
L maxi
N
S 4
M
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
N1) S1 S3 S4
EHG
EHG
EHG
0K
1K
2K
18 19.2 M14x1.0 1.5 21.7 10.5 20.1 12.5 17 15
20 21.5 M16x1.0 1.5 27.0 15.5 25.1 14.5 19 17
25 27.0 M20x1.0 1.5 30.7 17.0 27.1 18.5 24 20
S 3 E maxi
S 1
Panel cut-out (page 159)
P1
Note: 1) maximum length with crimp contacts.
PHG Free socket, key (G) or keys (A to F, L and R), cable collet
Reference
Model Series
Dimensions (mm)
A
L
S2
~L
PHG
PHG
PHG
PHG
PHG
PHG
0K
1K
2K
3K
4K
5K
13 34.0
15 45.0
8
9
19 54.0 12
23 65.0 15
29 75.5 19
42 95.0 30
S 2
Cable assembly (page 172)
M1
44
www.lemo.com
®
®
1)
PHG Free socket, key (G) or keys (A to F, L and R), cable collet and oversize cable collet
Reference
Dimensions (mm)
S1
Model Series
A
B
L
S2
PHG
PHG
PHG
PHG
1K
2K
3K
4K
15 14.5 63
19 17.0 70
23 22.0 89
12
15
19
12
15
19
32
~L
29 36.0 124 30
M2
Cable assembly (page 173)
S 2
S 1
Note: 1) correspond to K type of collet, the fitting of oversize collets onto
this model allows them to be fitted to the cables that can be accommodated
by the next housing size up (see page 68).
1)
PHG Free socket, key (G) or keys (A to F, L and R), cable collet and nut for fitting a bend relief
Reference
Dimensions (mm)
Model Series
A
L
S2
~L
PHG
PHG
PHG
PHG
PHG
0K
1K
2K
3K
4K
13 34.0
15 45.0
7
9
19 54.0 12
23 64.0 15
29 75.5 19
S 2
M1
Cable assembly (page 172)
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
PKG Fixed socket, nut fixing, key (G) or keys (A to F, L and R), cable collet
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
S1 S2 S3
PKG
PKG
PKG
PKG
PKG
PKG
0K
1K
2K
3K
4K
5K
18 19.2 M14x1.0 9.0 35.2 4.0 12.5
20 21.5 M16x1.0 9.5 46.2 4.5 14.5
8
9
17
19
~L
S 3
M
25 27.0 M20x1.0 9.0 54.5 5.0 18.5 12 24
31 34.0 M24x1.0 11.5 65.7 6.0 22.5 15 30
37 40.5 M30x1.0 9.0 75.5 6.5 28.5 19 36
55 54.0 M45x1.5 15.0 98.0 9.0 42.5 30
–
S 2
E maxi
S 1
P1
Panel cut-out (page 159)
M1
Cable assembly (page 172)
Note: the 5K series is delivered with a round nut.
www.lemo.com
45
®
®
PBG Fixed socket, key (G) with square flange, cable collet and screw fixing
~L
A
Reference
Dimensions (mm)
M
H
Model Series
PBG 3K
A
B
C
F
3
G
H
L
M
S2
29
19
23
3.4 23
65 22.5 15
Panel cut-out (page 159)
P7
ø G
S 2
F
Cable assembly (page 172)
M1
PEG Fixed socket, nut fixing, key (G) or keys (A to F, L and R), cable collet (back panel mounting)
Reference
Dimensions (mm)
~L
Model Series
A
B
e
E
L
M
P
S1 S2
P
S 1
M
PEG
PEG
PEG
PEG
0K
1K
2K
3K
18 18 M14x1.0 5.0 34 3.5 8.5 12.5
20 20 M16x1.0 6.5 45 3.5 10.0 14.5
8
9
25 25 M20x1.0 4.0 54 3.5 7.5 18.5 12
30 31 M24x1.0 7.5 65 4.5 12.0 22.5 15
Panel cut-out (page 159)
P1
S 2
E maxi
Cable assembly (page 172)
M1
Note: the 3K series is delivered with a conical nut.
46
www.lemo.com
®
®
Watertight or vacuumtight models
These socket and coupler models allow the device on which they are fitted to reach a protection index of IP68 as per IEC
60529. They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory
equipment, aviation, etc.
These models are identified by a letter «P» at the end of the reference.
Most of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at
the end of the part number (certificate on request).
Epoxy resin is used to seal these models.
Technical Characteristics
Mechanical and Climatical
Characteristics
Endurance1)
Value
Standard
Characteristics
Value
60 bar
Standard
> 5000 cycles
IEC 60512-5 test 9a
0K
1K
2K
3K
4K
5K
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
Humidity
up to 95% at 60° C
60 bar
40 bar
30 bar
15 bar
5 bar
0K-1K
- 20° C/+ 100° C
- 20° C/+ 80° C
Maximum operating
pressure3)
Temperature range
2K to 5K
Salt spray corrosion test4)
Climatical category
> 1000h
20/80/21
IEC 60512-6 test 11f
IEC 60068-1
Leakage rate (He)2)
< 10-7 mbar.l.s-1 IEC 60512-7 test 14b
Note: 1) see page 189, contact resistance after mating cycles. See page 185, mechanical endurance latching force.
2) only for vacuumtight models. Residual traces of grease used during (He) leak testing are on the o-ring. Please contact us for further details.
3) this value corresponds to the maximum allowed pressure difference for the assembled socket. 4) for chrome plated product («C» material code).
HGG Fixed socket, nut fixing, key (G) or keys (A to F and L), watertight or vacuumtight
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
S1 S3
L maxi
S 3
HGG
HGG
HGG
HGG
HGG
HGG
0K
1K
2K
3K
4K
5K
18 19.2 M14x1.0 5.5 23.0 4.0 12.5 17
20 21.5 M16x1.0 9.0 30.0 4.5 14.5 19
25 27.0 M20x1.0 13.0 33.7 5.0 18.5 24
31 34.0 M24x1.0 16.0 41.7 6.0 22.5 30
37 40.5 M30x1.0 14.0 49.2 6.5 28.5 36
M
55 54.0 M45x1.5 10.0 55.7 9.0 42.5
–
E maxi
S 1
P1
Panel cut-out (page 159)
Note: the 5K series is delivered with a round nut.
HEG Fixed socket, nut fixing, key (G) or keys (A to F and L), watertight or vacuumtight (back panel mounting)
L maxi
P
S 1
M
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
P
7
S1
HEG
HEG
HEG
0K
1K
2K
18 18 M14x1.0 3.4 23.0 3.5
12.5
20 20 M16x1.0 6.2 30.0 3.5 10 14.5
25 25 M20x1.0 5.0 33.7 3.5 10 18.5
E maxi
P1
Panel cut-out (page 159)
www.lemo.com
47
®
®
HMG Fixed socket with earthing tag, nut fixing, key (G) or keys (A to F and L),
watertight or vacuumtight (back panel mounting)
L maxi
P
S 1
M
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
P
S1
HMG
HMG
1K
2K
20 20 M16x1.0 6.2 30.0 3.5 10 14.5
25 25 M20x1.0 5.0 33.7 3.5 10 18.5
E maxi
Panel cut-out (page 159)
P1
Sl l Fixed coupler, nut fixing, key (G) or keys (L) at the flange end, and key (G) or keys (C or L)
at the other end, watertight or vacuumtight
L
M
S 3
S 1
E maxi
Reference
Contacts
Dimensions (mm)
G
L
SGL
L
Model Series
Type
A
B
e
E
L
M
S1 S3
female – male
male – female
male – female
male – female
male – female
male – female
male – female
25 27.0 M20x1.0 25 52.4 5.0 18.5 24
25 27.0 M20x1.0 25 52.4 5.0 18.5 24
31 34.0 M24x1.0 33 64.0 6.0 22.5 30
37 40.5 M30x1.0 48 74.0 6.5 28.5 36
37 40.5 M30x1.0 48 74.0 6.5 28.5 36
SGL
SLG
SLG
SLG
SLC
SLG
SLC
2K
2K
3K
4K
4K
5K
5K
SLG
SLC
G
C
L
Example
55 54.0 M45x1.5 58 88.0 9.0 42.5
55 54.0 M45x1.5 58 88.0 9.0 42.5
–
–
SGL
Plug with key G
Plug with key L
Panel cut-out (page 159)
P1
Note: for this fixed coupler, the first contact type mentioned is always the one at the flange end.
On request, these couplers can be produced in other series, with other keys.
Alignment key see page 49.
Note: The 5K series is delivered with a round nut.
48
www.lemo.com
®
®
Alignment Key (K series)
Alignment Key and Polarized Keying System
K series connector model part numbers are composed of three letters. The LAST LETTER indicates the key position and
the contact type (male or female).
Front view of a socket
Series
Contact type
Nb of
keys
Ref.
Note
0K
1K
2K
3K
4K
5K
Plug
Socket
α
G
A
B
C
D
E
F
1
2
2
2
2
2
2
2
–
α
α
α
γ
0°
0°
0°
0°
0°
0°
male
male
male
male
male
male
male
female
female
female
female
female
female
female
female
male
l
l
l
l
l
l
l
l
30°
45°
60°
95°
30°
45°
60°
95°
30°
45°
60°
95°
30°
45°
60°
95°
30°
45°
60°
95°
30°
45°
60°
95°
γ
β
β
γ
120° 120° 120° 120° 120° 120°
145° 145° 145° 145° 145° 145°
L
75°
75°
75°
75°
75°
75°
Front view of a socket
Series
Contact type
Nb of
keys
Ref.
Note
0K
1K
2K
3K
4K
5K
Plug
Socket
α
β
γ
5
5
5
5
–
–
–
–
–
–
–
–
–
–
–
–
95°
115°
35°
–
–
–
–
–
–
–
–
male
male
male
male
female
female
female
female
l
l
l
l
R
δ
25°
Note: Sll and TGL models are not available with all the keys. For Sll models see explanation on page 48.
Please consult the pages corresponding to these models.
l First choice alternative
l Special order alternative
www.lemo.com
49
®
®
T Series
T series connectors have been specifically designed for outdoor applications. They include an inner sleeve and seals
to prevent penetration of solids or liquids.This series is watertight when mated to give a protection index of IP68 as per
IEC 60529 standard and have the following main features:
– IP68 mated
– Same mounting hole as B sockets
– Black-chrome plated brass and plastic outershell
available
– Multipole types 2 to 32 contacts
– For cables 1.0 up to 10.5 mm
– Solder, crimp or print contacts
– Push-Pull self-latching system
– Mechanical key (FGG) with multiple keys
to avoid cross-mating
– High packing density for space savings
– 360° shielding for full EMC shielding
– Compatible with existing B sockets
Metal housing models (page 52)
Straight plug
Straight plugs
Fixed sockets
Free sockets
FFG
FGG
PHG
EGG
Elbow plug
FSG
FGG
PHG
EEG
L G
•
Plastic housing models (page 56)
Watertight or vacuumtight models (page 55)
Straight plug
Fixed socket
Fixed sockets
FGG
HEG
HMG
EGG
HGG
Part Section Showing Internal Components
Straight plug
Fixed socket
1
2
outer shell
latch sleeve
inner shell
insulator
4
2
6
3
7
5
6
1
2
5
4
3
1
6
7
8
9
10
1
2
3
4
5
6
7
outer shell
3
earthing crown
hexagonal nut
insulator
4
5
male contact
split insert carrier
earthing cone
gasket
6
female contact
o-ring
7
8
locking washer
collet
9
collet nut
10
50
www.lemo.com
®
®
Part Numbering System
Plug and free socket
F G G 1 T 3 0 6 C L A C 4 0 Z
.
.
.
Variant
Cable ø (page 70)
Model (page 52)
Collet type (page 70)
Alignment key (page 51)
Series
Contact:
A = male solder
L = female solder
C = male crimp
M = female crimp
Insert configuration (page 57)
Housing:
C = Chrome plated brass
K = Black Chrome plated brass
B = POM (black)
Insulator: PEEK
L = for solder contact
Y = for crimp contact
FGG.1T.306.CLAC40Z = Straight plug with key (G) and cable collet for bend relief, 1T series, multipole type with 6 contacts, outer shell
in chrome-plated brass, PEEK insulator, male solder contacts, C type collet for 4.0 mm diameter cable and nut for fitting a bend relief.
Fixed socket
E G G 1 T 3 0 6 C L L
.
.
.
Variant
Model (page 54)
Contact:
L = female solder
A = male solder
M = female crimp
C = male crimp
N = female print
D = male print
Alignment key (page 51)
Series
Insert configuration (page 57)
V = female elbow print
Housing:
C = Chrome plated brass
K = Black Chrome plated brass
B = POM
Insulator: PEEK
L = for solder or print contact
Y = for crimp contact
EGG.1T.306.CLL = fixed socket, nut fixing, with key (G), 1T series, multipole type with 6 contacts, outer shell in chrome-plated brass,
PEEK insulator, female solder contacts.
Alignment Key
Contact type
Plug
Socket
G
A
D
L
male
male
female
female
female
male
G
D
J
1)
J
A
L
male
female
female
J
male
Note: 1) for 2T and 3T series.
www.lemo.com
51
®
®
Metal housing models
Technical Characteristics
Mechanical and Climatical
Electrical
Characteristics
Endurance 1)
Value
> 3000 cycles
Standard
Characteristics
Value
Standard
IEC 60512-5 test 9a
at 10 MHz
at 1 GHz
> 75 dB
> 40 dB
IEC 60169-1-3
IEC 60169-1-3
Shielding
efficiency
Humidity
up to 95% at 60° C
Temperature range 2)
Resistance to vibrations
Shock resistance
- 55° C, + 200° C / (-20°C, +80°C)
Note:
the various tests have been carried out with FGG and EGG connector
pairs, with chrome-plated brass shell and PEEK insulator.
10-2000 Hz, 15g IEC 60512-4 test 6d
Detailed electrical characteristics, as well as materials and treatment are
presented in the chapter Technical Characteristics on page 182.
100 g, 6 ms
> 1000h
IEC 60512-4 test 6c
IEC 60512-6 test 11f
IEC 60529
Salt spray corrosion test 6)
Protection index (mated) 3)
Latching retention force 4) 5)
Climatical category
IP 68/IP 66
From 85 N up to 300 N
50/175/21
IEC 60068-1
Note:
1) see page 189, contact resistance after mating cycles. See page 185, mechanical endurance latching force.
2) operating temperature is -20°C, +80°C for watertight or vacuumtight models fitted with an FPM (Viton®) o-ring and Epoxy.
3) IP68 achieved providing that the cable is perfectly circular and that assembly process ensures a high integrity seal.
4) average value.
5) depending of the size.
6) for chrome plated product («C» material code).
FGG Straight plug, cable collet
Reference
Dimensions (mm)
S1
Cable ø
Model Series
A
L
M
S2
min. max.
~L
FGG
FGG
FGG
FGG
FGG
TT
0T
1T
2T
3T
7.0 33.2 25.2 5.5
9.5 39.0 29.0 7.5
12.0 46.0 35.0 11.0
5
7
9
2.4
1.0
1.3
1.3
2.6
3.0
5.0
~M
6.5
15.0 55.0 43.0 14.0 12
18.8 64.0 49.0 16.0 14
8.5
S 2
S 1
10.5
M1
Cable assembly (page 174)
1)
FGG Straight plug, cable collet and nut for fitting a bend relief
Reference
Dimensions (mm)
S1
Cable ø
min. max.
Model Series
A
L
M
S2
FGG
FGG
FGG
FGG
FGG
TT
0T
1T
2T
3T
7.0 32.7 24.7 5.5
9.5 38.0 28.0 7.5
12.0 45.0 34.0 11.0
6
7
9
2.4
1.0
1.3
1.3
2.6
3.0
5.0
~L
~M
6.5
15.0 54.0 42.0 14.0 12
18.8 62.0 47.0 16.0 15
8.5
S 2
S 1
10.5
M1
Cable assembly (page 174)
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
52
www.lemo.com
®
®
FFG Straight plug, non latching, cable collet
Reference
Dimensions (mm)
S1
Cable ø
Model Series
A
L
M
S2
min. max.
~L
FFG
FFG
FFG
FFG
FFG
TT
0T
1T
2T
3T
7.0 33.2 25.2 5.5
9.5 39.0 29.0 8.0
12.0 46.0 35.0 10.0
5
7
9
2.4
1.0
1.3
1.3
2.6
3.0
5.0
~M
6.5
15.0 55.0 43.0 13.0 12
18.8 64.0 49.0 16.0 14
8.5
S 2
S 1
10.5
M1
Cable assembly (page 174)
FSG Adjustable right angle plug
L
M
Reference
Dimensions (mm)
Cable ø
Model Series
A
8
H
L
M
S1 S2 min. max.
FSG
FSG
FSG
FSG
TT
0T
1T
2T
20.0 28.5 20.5
5
7
9
7.5 2.4
9.5 1.0
12.0 1.3
3.0
5.0
6.5
8.5
S 2
S 1
10 23.0 36.0 26.0
13 30.0 43.5 32.5
17 37.5 54.0 42.0 12 16.0 1.3
PHG Free socket, cable collet
Reference
Dimensions (mm)
Cable ø
Model Series
A
L
S1
S2
min. max.
PHG
PHG
PHG
PHG
PHG
TT
0T
1T
2T
3T
7.0 32.0 5.5
9.5 38.0 8.0
12.0 43.5 10.0
5
7
9
2.4
1.0
1.3
1.3
2.6
3.0
5.0
~L
6.5
S 2
S 1
15.0 52.0 14.0 12
18.8 61.5 16.0 14
8.5
10.5
M1
Cable assembly (page 174)
1)
PHG Free socket, cable collet and nut for fitting a bend relief
Reference
Model Series
Dimensions (mm)
Cable ø
min. max.
A
L
S1
S2
PHG
PHG
PHG
PHG
PHG
TT
0T
1T
2T
3T
7.0 31.5 5.5
9.5 37.0 8.0
12.0 42.5 10.0
6
7
9
2.4
1.0
1.3
1.3
2.6
3.0
5.0
~L
6.5
15.0 51.0 14.0 12
18.8 60.0 16.0 15
8.5
S 2
S 1
10.5
M1
Cable assembly (page 174)
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
www.lemo.com
53
®
®
EGG Fixed socket, nut fixing
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
N1) S1 S2
L maxi
N
S 2
EGG
EGG
EGG
EGG
EGG
TT
0T
1T
2T
3T
10.0 10.2 M7x0.5 5.5 16.0 1.2 13.5 6.3
9
M
12.0 12.5 M9x0.6 6.0 21.0 1.5 19.1 8.2 11
15.5 16.0 M12x1.0 6.0 23.0 1.8 21.5 10.5 14
18.5 19.6 M15x1.0 7.5 26.5 1.8 24.6 13.5 17
23.5 25.1 M18x1.0 9.6 30.1 2.5 25.0 16.5 22
E maxi
S 1
P1
Panel cut-out (page 157)
Note: 1) maximum length with crimp contacts.
EEG Fixed socket, nut fixing, back panel mounting
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
N1)
P
S1
L maxi
N
EEG
EEG
EEG
EEG
EEG
TT
0T
1T
2T
3T
10.0 10.0 M7x0.5 4.5 16.0 13.5
12.0 12.0 M9x0.6 6.5 21.0 19.1
7
9
6.3
8.2
15.5 16.0 M12x1.0 6.5 23.0 21.5 10 10.5
18.5 20.0 M15x1.0 7.5 26.5 24.6 11 13.5
23.5 24.0 M18x1.0 7.5 30.1 25.0 12 16.5
S 1
E maxi
P
P1
Panel cut-out (page 157)
Note: 1) maximum length with crimp contacts.
LlG Fixed socket, nut fixing, key (G) or keys (A…L)
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
N
S1 S2
LlG
LlG
LlG
0T
1T
2T
19 18.2 M13x0.75 4.0 18.5
21 19.2 M15x1.00 5.8 21.0
25 27.0 M20x1.00 6.5 24.1
5
5
5
16.0 11.5 16
18.5 13.5 17
21.5 18.5 24
V+
Red (GND)
(3.3-3.6 Vdc)
Green (GND)
Blue (GND)
Note: Only available with solder or crimp contacts.
LEG model is with LED flange, LNG model is with narrow LED flange and
LMG model is with single standby LED flange.
L
N
M
S 2
Dim. (mm)
L mini
Series
A
B
L
0T
1T
2T
13.1 11.6 24
15.1 13.6 26
20.1 18.6 29
E maxi
S 1 AWG 28 / AWG 30
+ 0.1
0
B
54
www.lemo.com
®
®
Watertight or vacuumtight models
These models are identified by a letter «P» at the end of the reference. Most of these models are also available in a vacuum-
tight version. Such models are identified by an additional letter «V» at the end of the part number (certificate on request).
Epoxy resin is used to seal these models. The temperature range is -20°C / +80°C.
Part Number Example
HGG.0T.305.CLLP (5 contacts, resin potted)
HGG.0T.305.CLLPV (5 contacts, resin potted and vacuumtight tested)
Technical Characteristics
Mechanical and Climatical
Characteristics
Endurance 1)
Value
Standard
Characteristics
Value
60 bar
Standard
> 3000 cycles
IEC 60512-5 test 9a
TT
0T
1T
2T
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
Humidity
up to 95% at 60° C
60 bar
60 bar
40 bar
Maximum operating
pressure7)
Temperature range 2)
Resistance to vibrations
Shock resistance
-20°C, +80°C
10-2000 Hz, 15g IEC 60512-4 test 6d
100 g, 6 ms
> 1000h
IEC 60512-4 test 6c
IEC 60512-6 test 11f
IEC 60529
Note:
1)
see page 189, contact resistance after mating cycles. See page 185,
mechanical endurance latching force.
Salt spray corrosion test 6)
Protection index (mated) 3)
Latching retention force 4) 5)
Climatical category
Leakage rate (He)
2)
3)
operating temperature is -20°C, +80°C for watertight or vacuumtight
models fitted with an FPM (Viton®) o-ring and Epoxy.
IP68 achieved providing that the cable is perfectly circular and that
assembly process ensures a high integrity seal.
average value.
IP 68/IP 66
From 85 N up to 300 N
4)
5)
6)
7)
50/175/21
IEC 60068-1
depending of the size.
for chrome plated product («C» material code).
this value corresponds to the maximum allowed pressure difference
for the assembled socket.
< 10-7 mbar.l.s-1 IEC 60512-7 test 14b
HGG Fixed socket, nut fixing, watertight or vacuumtight
Reference
Dimensions (mm)
L maxi
N
Model Series
A
B
e
E
L
M
N1) S1 S2
S 2
M
HGG
HGG
HGG
HGG
TT
0T
1T
2T
10.0 10.2 M7x0.5 5.5 18.0 1.2 15.0 6.3
9
12.0 12.5 M9x0.6 6.5 22.0 1.5 18.5 8.2 11
15.5 16.0 M12x1.0 6.0 26.0 1.8 21.5 10.5 14
18.5 19.6 M15x1.0 8.0 30.5 1.8 25.0 13.5 17
E maxi
S 1
P9
Panel cut-out (page 157)
HEG Fixed socket, nut fixing, watertight or vacuumtight, back panel mounting
Reference
Dimensions (mm)
L maxi
Model Series
A
B
e
E
L
N
P
S1
N
HEG
HEG
HEG
HEG
TT
0T
1T
2T
10.0 10.0 M7x0.5 4.5 18.0 15.0
12.0 12.0 M9x0.6 6.5 22.0 18.5
7
9
6.3
8.2
15.5 16.0 M12x1.0 6.5 26.0 21.5 10 10.5
18.5 20.0 M15x1.0 7.5 30.5 25.0 11 13.5
S 1
E maxi
P
P9
Panel cut-out (page 157)
55
®
®
HMG Fixed socket with earthing tag, nut fixing, watertight or vacuumtight, back panel mounting
Reference
Dimensions (mm)
L maxi
N
Model Series
A
B
e
E
L
N
P
S1
HMG
HMG
HMG
HMG
TT
0T
1T
2T
10.0 10.0 M7x0.5 4.5 18.0 15.0
12.0 12.0 M9x0.6 6.5 22.0 18.5
7
9
6.3
8.2
15.5 16.0 M12x1.0 6.5 26.0 21.5 10 10.5
18.5 20.0 M15x1.0 7.5 30.5 25.0 11 13.5
S 1
E maxi
P
P9
Panel cut-out (page 157)
Plastic housing models
1)
FGG Straight plug, cable collet and nut for fitting a bend relief, POM outer shell
Reference
Dimensions (mm)
Cable ø
~L
Model Series
A
L
M
S2
8
min. max.
~M
FGG
FGG
0T
1T
9.7 38.5 28.5
1.0
1.3
5.0
6.5
13.0 45.0 34.0 10
S 2
M1
Cable assembly (page 174)
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
EGG Fixed socket, nut fixing, POM outer shell
L maxi
N
Reference
Dimensions (mm)
S 2
M
Model Series
A
B
e
E
L
M
N1) S1 S2
EGG
EGG
0T
1T
12.0 12.5 M9x0.6 6.0 21.0 1.5 19.1 8.2 11
15.5 16.0 M12x1.0 6.0 23.0 1.8 21.5 10.5 14
E maxi
S 1
P1
Panel cut-out (page 157)
Note: 1) maximum length with crimp contacts.
56
www.lemo.com
®
®
Insert configuration (B, K and T series)
Multipole
Solder contacts
Crimp contacts
Contact
type
Solder
Crimp
AWG
Crimp
contact
contact
1
2
4
3
4
3
1
2
00-TT
0.5
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
–
l
l
l
l
l
–
l
l
l
l
–
30
20
20
16
12
8
32
32
26
18
14
–
28
20
18
12
10
–
1.00 0.95 1.15 1.20
3.5
2
0B-0K-0T 0.9
1B-1K-1T 1.3
2B-2K-2T 2.0
3B-3K-3T 3.0
1.00 1.05 1.45 1.20 10.02)
1.50 1.35 1.70 1.45 15.03)
2.10 1.75 2.85 2.70 25.03)
2.10 1.55 2.30 1.80 35.0
302
5B-5K
00-TT
6.0
0.5
–
3.60 2.95
–
–
50.0
3.0
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
–
30
20
20
18
16
30
22
22
20
16
12
10
32
32
26
22
18
32
32
32
26
18
14
12
28
20
18
14
12
28
22
20
18
12
10
10
0.80 0.95 1.35 1.10
3
4
0B-0K-0T 0.9
1.20 0.90 1.70 1.60 8.02)
1.30 1.55 1.60 1.85 12.0
2.40 1.85 1.90 1.90 17.03)
1.90 1.50 3.20 2.65 25.0
303 1B-1K-1T 1.3
2B-2K-2T 1.6
3B-3K-3T 2.0
00-TT
0.5
0.80 0.65 1.05 1.05
2.0
0B-0K-0T 0.7
1B-1K-1T 0.9
0.85 0.70 1.35 1.10 7.02)
1.35 1.45 1.70 1.80 10.02)
1.85 1.85 2.20 2.20 15.03)
1.45 1.25 2.50 2.20 19.0
2.10 1.50 1.80 1.20 30.0
2.95 2.65 3.20 2.40 35.0
304 2B-2K-2T 1.3
3B-3K-3T 2.0
4B-4K
5B-5K
3.0
4.0
–
5
305
00-TT
0.35
l
–
l
–
30
–
–
0.70 1.00
–
–
1.7
1)
l First choice alternative
l Special order alternative
Note: see calculation method, caution and suggested standard on page 190.
2) rated current = 6A for socket with elbow (90°) contact for printed circuit.
3) rated current = 12A for socket with elbow (90°) contact for printed circuit.
4) test voltage (kV) contact-shell is slightly lower for K and T series (values here are for B series).
www.lemo.com
57
®
®
Multipole
Solder contacts
Contact
type
Solder
contact
Crimp
contact
AWG
Crimp
1
2
4
3
4
3
1
2
Crimp contacts
0B-0K-0T 0.7
1B-1K-1T ꢀ 0.9
2B-2K-2T 1.3
3B-3K-3T 1.6
lꢀ
lꢀ
lꢀ
lꢀ
l
l
l
l
lꢀ
lꢀ
lꢀ
lꢀ
lꢀ
22
22
20
18
32
32
26
22
22
1.00 0.70 1.25 1.20 6.52)
5
6
6
7
lꢀ
lꢀ
lꢀ
20 ꢀ 1.25 1.15 1.30 1.55 9.02)
305
306
306
18
14
1.75 1.60 2.15 2.15 14.03)
1.90 1.25 2.40 1.75 19.0
0B-0K-0T 0.5
1B-1K-1T 0.7
lꢀ l4)
lꢀ
lꢀ
lꢀ
lꢀ
28
22
32
32
28
22
0.85 0.65 1.40 1.20
2.5
lꢀ
l
1.05 1.20 1.35 1.45 7.02)
00-TT
0.35
lꢀ
lꢀ
lꢀ
lꢀ
–
–ꢀ
–ꢀ
lꢀ
lꢀ
–ꢀ
30
20
18
16
28
22
20
18
16
–
–
0.60 0.75
–
–
1.5
2B-2K-2T ꢀ 1.3
l
l
lꢀ
lꢀ
lꢀ
lꢀ
lꢀ
lꢀ
lꢀ
lꢀ
lꢀ
26
22
18
32
32
26
22
18
18 ꢀ 1.35 1.45 2.00 2.35 12.0
3B-3K-3T 1.6
14
12
28
1.60 1.15 1.90 1.80 17.0
2.00 1.75 2.75 2.40 24.0
4B-4K
2.0
0B-0K-0T 0.5
1B-1K-1T 0.7
2B-2K-2T 1.3
3B-3K-3T 1.6
lꢀ l4)
lꢀ
lꢀ
lꢀ
lꢀ
–ꢀ
0.80 0.70 1.40 1.20
2.5
lꢀ
lꢀ
lꢀ
lꢀ
l
l
l
lꢀ
22 ꢀ 0.95 1.05 1.45 1.45 7.02)
18
14
12
1.75 1.60 1.95 2.15 11.0
1.70 1.25 2.00 2.05 15.0
2.00 1.80 1.50 1.35 20.0
307
4B-4K
2.0
8
8
1B-1K-1T 0.7
lꢀ
l
lꢀ
lꢀ
22
32
22
0.95 1.15 1.30 1.30
5.0
308
308
2B-2K-2T ꢀ 0.9
lꢀ
lꢀ
l
l
lꢀ
lꢀ
lꢀ
lꢀ
22
20
32
26
20
1.50 1.25 1.95 1.95 10.02)
3B-3K-3T 1.3
18 ꢀ 1.65 1.15 1.85 1.75 13.0
Note: 1) see calculation method, caution and suggested standard on page 190.
2) rated current = 6A for socket with elbow (90°) contact for printed circuit.
3) rated current = 12A for socket with elbow (90°) contact for printed circuit.
4) available only for connectors fitted with male contacts.
lꢀ First choice alternative
lꢀSpecial order alternative
5) test voltage (kV) contact-shell is slightly lower for K and T series (values here are for B series).
58
www.lemo.com
®
®
Multipole
Solder contacts
Crimp contacts
Contact
type
Solder
contact
Crimp
contact
AWG
Crimp
1
2
4
3
4
3
1
2
9
9
0B-0K-0T 0.5
lꢀ l3)
lꢀ
l
28
32
28
0.60 0.50 1.00 0.85
2.0
309
309
6.0
15.0
8x1.3
3B-3K-3T
ꢀ
ꢀ
ꢀ
lꢀ
ꢀ
20
16
26
18
18
12
1.35 1.05 1.10 1.05
0.90 1.50 1.20 1.80
lꢀ
l
–
1x2.0
1B-1K-1T 0.5
2B-2K-2T 0.9
3B-3K-3T 1.3
lꢀ l3)
lꢀ
lꢀ
lꢀ
l
l
l
l
–
28
22
20
18
12
32
32
26
22
14
28
20
18
14
10
2.5
10
lꢀ
lꢀ
lꢀ
lꢀ
l
l
lꢀ
l
1.45 1.30 1.80 2.10 8.02)
1.25 0.90 1.50 1.80 12.0
1.85 1.30 1.90 1.95 17.0
2.35 2.30 2.65 3.20 20.0
310
4B-4K
5B-5K
1.6
3.0
lꢀ
–
12
12
12
0B-0K-0T 0.35
lꢀ
–
–
lꢀ
–
–
30
22
–
–
0.80 1.00
–
–
–
–
1.5
5.0
312
312
312
XB
0.7
lꢀ
lꢀ
32
22
1.35 1.65
2B-2K-2T 0.7
3B-3K-3T 0.9
lꢀ
lꢀ
lꢀ
l
l
l
lꢀ
lꢀ
lꢀ
l
l
–
22
22
20
32
32
26
22
20
18
1.25 1.35 1.65 2.00 7.02)
1.45 1.00 1.65 1.85 9.0
1.45 1.60 1.90 1.85 12.0
4B-4K
1.3
Note: 1) see calculation method, caution and suggested standard on page 190.
2) rated current = 6A for socket with elbow (90°) contact for printed circuit.
3) available only for connectors fitted with male contacts.
l First choice alternative
Special order alternative
4) test voltage (kV) contact-shell is slightly lower for K and T series (values here are for B series).
www.lemo.com
59
®
®
Multipole
Solder contacts
Contact
type
Solder
contact
Crimp
contact
AWG
Crimp
1
2
4
3
4
3
1
2
Crimp contacts
1B-1K-1T 0.5
2B-2K-2T 0.7
3B-3K-3T 0.9
lꢀ l3)
lꢀ
l
l
l
–
28
22
22
16
32
32
32
18
28
22
20
12
0.80 1.20 0.95 1.60
2.0
14
16
16
18
19
20
lꢀ
lꢀ
lꢀ
l
lꢀ
lꢀ
l
1.15 1.35 1.55 1.55 6.52)
1.20 1.20 1.80 1.65 9.02)
2.10 2.00 2.85 2.95 18.0
314
316
316
318
319
320
l
5B-5K
2.0
lꢀ
1B-1K-1T 0.5
lꢀ l3)
lꢀ
l
28
32
28
0.80 1.25 0.95 1.60
1.5
2B-2K-2T 0.7
3B-3K-3T 0.9
lꢀ
lꢀ
lꢀ
lꢀ
l
l
l
lꢀ
lꢀ
lꢀ
lꢀ
l
l
l
–
22
22
22
16
32
32
32
18
22
20
20
12
0.95 1.25 1.55 1.75
1.20 0.85 1.80 1.50
6.0
8.0
4B-4K
5B-5K
0.9
2.0
1.35 1.50 2.30 2.10 10.0
1.85 1.95 2.45 3.05 12.0
–
2B-2K-2T 0.7
3B-3K-3T 0.9
lꢀ
lꢀ
l
l
lꢀ
lꢀ
l
l
22
22
32
32
22
20
0.85 1.20 1.45 2.10
1.20 1.05 1.85 1.60
5.5
7.0
2B-2K-2T 0.7
lꢀ
l
lꢀ
l
22
22
32
32
22
22
0.95 1.25 1.55 1.65
5.0
6.0
3B-3K-3T 0.7
lꢀ
l
lꢀ
l
1.00 0.90 1.35 1.55
Note: 1) see calculation method, caution and suggested standard on page 190.
2) rated current = 6A for socket with elbow (90°) contact for printed circuit.
3) available only for connectors fitted with male contacts.
l First choice alternative
Special order alternative
4) test voltage (kV) contact-shell is slightly lower for K and T series (values here are for B series).
60
www.lemo.com
®
®
Multipole
Solder contacts
Crimp contacts
Contact
type
Solder
contact
Crimp
contact
AWG
Crimp
1
2
4
3
4
3
1
2
20
22
22
24
26
30
4B-4K
5B-5K
0.9
1.6
lꢀ
lꢀ
l
lꢀ
–
–
22
18
32
22
20
14
1.35 1.00 1.05 0.95
8.0
320
322
322
324
326
330
lꢀ
l
1.90 1.70 2.20 2.40 10.0
XB
0.5
lꢀ
–
lꢀ
–
28
22
–
–
0.50 0.90
–
–
1.5
5.5
3B-3K-3T 0.7
3B-3K-3T 0.7
lꢀ
l
lꢀ
l
32
22
1.00 0.90 1.70 1.45
lꢀ
lꢀ
l
l
lꢀ
lꢀ
l
22
22
32
32
22
20
0.95 0.80 1.35 1.35
1.20 1.45 1.80 2.05
4.0
7.0
4B-4K
0.9
–
2B-2K-2T 0.5
3B-3K-3T 0.7
lꢀ
lꢀ
–
lꢀ
lꢀ
l
l
28
22
–
–
0.95 1.30
–
–
2.0
4.0
l
32
22
0.95 0.70 1.50 1.30
3B-3K-3T 0.7
lꢀ
lꢀ
lꢀ
l
l
l
lꢀ
lꢀ
lꢀ
l
–
22
22
20
32
32
26
22
20
18
0.80 0.70 1.35 1.20
0.95 0.85 1.75 1.45
1.45 1.60 2.05 2.45
3.5
5.0
8.0
4B-4K
5B-5K
0.9
1.3
–
Note: 1) see calculation method, caution and suggested standard on page 190.
2) test voltage (kV) contact-shell is slightly lower for K and T series (values here are for B series).
l First choice alternative
Special order alternative
www.lemo.com
61
®
®
Multipole
Solder contacts
Contact
type
Solder
contact
Crimp
contact
AWG
Crimp
1
2
4
3
4
3
1
2
Crimp contacts
32
32
40
48
48
50
2B-2K-2T 0.5
lꢀ
–
lꢀ
l
28
22
–
–
0.80 1.20
–
–
–
1.5
3.0
332
332
340
348
348
350
3B-3K
0.7
lꢀ
l
lꢀ
l
32
22
0.75 0.70
–
4B-4K
5B-5K
0.7
1.3
lꢀ
lꢀ
l
l
lꢀ
lꢀ
–
–
22
20
32
26
22
18
0.90 0.90 1.30 1.30
1.30 1.45 2.00 1.95
2.0
7.0
4B-4K
5B-5K
5B-5K
0.7
1.3
0.9
lꢀ
lꢀ
lꢀ
l
l
l
lꢀ
lꢀ
lꢀ
–
–
–
22
20
22
32
26
32
22
18
20
0.70 0.70 1.00 1.00
1.20 1.10 2.00 1.55
1.30 1.60 1.20 1.45
1.5
6.0
6.0
Note: 1) see calculation method, caution and suggested standard on page 190.
2) test voltage (kV) contact-shell is slightly lower for K and T series (values here are for B series).
l First choice alternative
Special order alternative
62
www.lemo.com
®
®
Multipole
Solder contacts
Crimp contacts
Contact
type
Solder
Crimp
AWG
Crimp
contact
contact
1
2
4
3
4
3
1
2
54
64
354
364
5B-5K
5B-5K
0.9
0.9
l
l
l
–
–
22
22
32
32
20
20
1.15 1.55 2.00 2.10
1.30 1.55 1.35 1.85
5.0
3.0
l
l
l
l First choice alternative
l Special order alternative
Note: 1) see calculation method, caution and suggested standard on page 190.
2) test voltage (kV) contact-shell is slightly lower for K and T series (values here are for B series).
www.lemo.com
63
®
®
Housings (B, K and T series)
Outer shell and collet nut
Latch sleeve + earthing crown
Other metallic components
Remarks
Ref.
Note
Material
Brass
Surf. treatment
chrome
Material
Surf. treatment
nickel 2)
nickel 2)
nickel 2)
nickel 2)
–
Material
brass
Surf. treatment
nickel
nickel
nickel
nickel
nickel
–
C
N
K
S
T
brass/bronze
l
l
l
l
l
l
l
l
l
l
l
l
l
Brass
nickel
brass/bronze
brass
Brass
black chrome 3) brass/bronze
brass
Stainless steel
Stainless steel
Stainless steel
Aluminium alloy
–
brass/bronze
stainless steel
stainless steel
brass/bronze
brass
–
–
brass
U
L
–
stainless steel
brass
1)
anodized
nickel 2)
nickel 2)
nickel 2)
nickel 2)
nickel 2)
nickel 2)
nickel 2)
nickel
nickel
nickel
nickel
nickel
nickel
nickel
X
G
P
R
H
P
Aluminium alloy nickel anthracite brass/bronze
brass
PEEK (natural)
PSU
–
brass/bronze
brass/bronze
brass/bronze
brass/bronze
brass/bronze
brass
Only for FGG and ENG (B series)
Only for FGY and ENY (B series) 1)
Only for FGY and ENY (B series) 1)
Only for elbow sockets (B series)
Only for CRF and CRG bridge plug 1)
–
brass
PPSU
–
–/nickel
–
brass
PPS/brass
PA.6
brass
brass
N1)ote: detailed characteristics of these materials and treatments are presented on page 182.
see «variant» for the colour.
3) surface not conductive use socket with earthing tag (ENl and HMl model) to carry shield.
l First choice alternative
l Special order alternative
2) in the K series, the latch sleeve is chrome-plated.
Insulators (B, K and T series)
Ref.
Material
PEEK
PEEK
Contact type
Crimp
Solder or print
Remarks
Note
Y
L
extended design, with contacts that recess into insulator
l
l
Note: detailed characteristics of these materials are presented on page 187.
Contacts (B, K and T series)
Soldering characteristics
Crimping characteristics
– no need to order specific tools, a simple soldering iron
– practical, quick contact fixing outside the insulator
is sufficient
– possible use at high temperature
– ideal for very small and fragile conductors
– contacts with solder cups to allow the solder to flow
– need to order specific tools
– no risk of heating the insulator during the conductor-
contact fixing
– high tensile strength
– totally lead-free solution
Note: see page 188 for more information.
64
www.lemo.com
®
®
Contacts reference for couplers Rll, Sll and TGL
Ref.
Contact type
Remarks
A
L
Male - Female
contact configuration is explained on page 24, 33, 48
contact configuration is explained on page 24, 33, 48
contact configuration is explained on page 24
Female - Male
M
Female - Female
Contacts reference for plugs, free or fixed sockets
Conductor
AWG
Contact
Reference
Solid
Stranded
1)
(N)
Fr
Contact type
Notes
Section (mm2)
Section
ø A
ø C
Form
AWG
max.
Male Female
(mm) (mm) per fig. max.
(mm2)
min.
max.
min.
max.
0.35 0.40
0.52) 0.402)
–
–
–
–
–
–
–
–
–
–
–
1
1
2
1
2
2
1
2
2
1
2
1
2
1
1
28
28
28
22
225)
20
16
14
10
10
–
0.09
0.09
0.09
0.34
0.345)
0.50
1.00
1.50
4.00
6.00
–
–
30
–
0.05
0.05
0.09
0.34
0.345)
0.50
1.00
1.50
4.00
6.00
10.00
0.09
0.34
0.09
0.50
0.34
0.09
1.00
0.50
0.34
1.50
1.00
2.50
1.50
4.00
6.00
–
–
Solder
–
–
30
–
0.5
0.7
0.9
1.3
1.6
2.0
3.0
4.0
6.0
0.456)
0.80
0.805)
1.00
1.40
1.80
2.70
3.70
5.20
28
–
–
–
223)
223)5)
203)
18
–
–
ø A
ø C
ø C
–
–
–
l
–
–
–
A
L
ø A
–
–
–
–
16
–
–
–
12
–
–
–
10
–
–
–
8
–
–
C
C
B
C
B
G
C
B
G
C
B
C
B
C
C
M
M
P
0.54) 0.45
–
–
32
26
32
24
26
32
20
24
26
18
22
16
18
14
12
28
223)
0.035
0.140
0.035
0.250
0.140
0.035
0.500
0.250
0.140
1.000
0.340
1.500
1.000
2.500
4.000
12
22
22
30
30
30
40
40
40
50
50
65
65
75
90
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Crimp
0.7
0.7
0.9
0.9
0.9
1.3
1.3
1.3
1.6
1.6
2.0
2.0
3.0
4.0
0.80
0.45
1.10
0.80
0.45
1.40
1.10
0.80
1.90
1.40
2.40
1.90
3.20
4.00
–
–
fig. 1
ø A
ø C
ø C
–
–
28
M
P
–
–
20
223)
ø A
–
–
U
M
P
–
–
28
–
–
18
–
–
20
U
M
P
–
–
223)
143)
18
fig. 2
–
–
ø A
ø A
ø C
ø C
–
–
M
P
–
–
123)
–
–
14
103)
10
M
M
–
–
–
–
N1)ote:
contact retention force in the insulator (according to IEC 60512-8 test 15 a).
2) for 00/TT multipole series.
3) for a given AWG, the diameter of some stranded conductor designs is larger than the solder cup diameter. Make sure that the maximum conductor
4) diameter is smaller than ø C.
for 00 /TT multipole series or for 0B/0T and 1B/1T series with male contacts.
5) for 0B.302/0B.303, 0K.302/0K.303 and 0T.302/0T.303 ø C = 1.0 mm, AWG max 20, section max (mm2) 0.50.
6) for 00/TT and 1B/1K/1T series, according to manufacturing and plating tolerance ø C min = 0.43 mm.
l First choice alternative
l Special order alternative
www.lemo.com
65
®
®
Contacts reference for plugs, free or fixed sockets
Conductor
Stranded
Section (mm2)
min. max.
Contact
Reference
Solid
1)
Fr
(N)
Contact type
Notes
Section
AWG
min. max.
ø A
ø C
Form
AWG
max.
Male Female
(mm) (mm) per fig. max.
(mm2)
Print
L
ø C
ø C
ø A
L dimensions and C are detailed in the section on PCB drilling pattern.
See page 163.
l
ø A
D
N
L
Print (elbow)
L
ø A
L dimensions and C are detailed in the section on PCB drilling pattern.
See page 164.
l
V
V
ø C
Note: 1) contact retention force in the insulator (according to IEC 60512-8 test 15 a).
l First choice alternative
l Special order alternative
66
www.lemo.com
®
®
Collets (B, K and T series)
D and M type collets for B series
D type
M type
Reference
Type Code
22
Collet ø
Cable ø
Reference
Type Code
52
Collet ø
Cable ø
Notes
Notes
ø A
ø B
max.
min.
ø A
ø B
max.
min.
4)
D
2.2
2.7
3.5
–
–
2.2
2.7
3.5
1.4
> 2.2
> 2.7
M
5.2
6.2
–
5.2
6.2
> 4.2
4.9
00
3B
4B
D
D
27
35
D
D
D
D
D
D
62
72
92
10
11
12
–
–
8)
2)
2.8
7.7
7.7
> 6.2
> 7.7
> 9.2
9.2
–
9.2
D
D
D
D
D
22
32
42
52
56
2.1
3.2
4.2
5.2
5.6
–
–
2.2
3.2
4.2
5.2
5.6
1.4
> 2.2
> 3.2
> 4.2
> 5.2
0B
10.2
11.0
12.0
–
10.0
–
11.0 > 10.0
12.0 > 11.0
–
1) 8)
10.2
8)
4.7
4.7
1) 8)
5)
5)
5)
6)
M
M
M
M
D
D
D
D
D
62
72
82
92
10
12
13
15
16
6.2
7.2
–
–
6.2
7.2
> 5.2
> 6.2
> 7.2
> 8.2
9.1
M
M
D
D
D
D
D
27
31
42
52
62
72
76
2.7
3.1
4.2
5.2
6.2
7.2
7.6
–
–
2.7
3.1
4.2
5.2
6.2
7.2
7.6
> 2.2
> 2.7
3.1
1B
8.2
–
8.2
9.2
8.6
–
9.2
–
10.8
12.3
13.8
15.3
16.3
10.5
12.0
13.5
15.0
16.0
–
> 4.2
> 5.2
> 6.2
> 7.2
–
10.6
12.1
13.6
15.1
–
12.5
12.5
12.5
8)
6.2
6.9
7)
1)
1) 8)
D
D
D
D
52
62
72
82
5.2
6.2
7.2
8.2
7.2
7.2
7.2
7.2
5.0
6.0
7.0
8.0
4.4
5.4
6.4
7.4
XB
2B
D
D
D
D
D
D
D
D
11
13
15
17
19
21
23
25
11.8
13.8
15.8
17.8
19.8
21.8
23.8
25.3
–
11.5
13.5
15.5
17.5
19.5
21.5
23.5
25.0
9.6
11.6
13.6
15.6
17.6
19.6
21.6
23.6
5B
–
–
7)
1)
1)
1)
1)
1)
1)
–
3)
3)
M
M
D
D
D
D
D
D
D
21
32
42
52
62
72
82
92
99
2.1
3.1
4.2
5.2
6.2
7.2
8.2
9.2
9.9
–
–
2.2
3.2
4.2
5.2
6.2
7.2
8.2
9.2
9.9
1.4
> 2.2
> 3.2
> 4.2
> 5.2
> 6.2
> 7.2
> 8.2
> 9.2
–
–
–
21.8
21.8
–
–
–
–
8)
8.6
8.6
1) 8)
Note: all dimensions are in millimetres.
1)
these collets cannot be used for connector models with nut for fitting a bend relief. No bend relief available for this cable size.
2)
3)
4)
5)
6)
7)
8)
the inner diameter of the smallest bend relief available is 2.5 mm (in TPU) / 1.7 mm (in silicone).
for 0B bend relief.
for 1B bend relief.
for 2B bend relief.
for 4B bend relief.
the inner diameter of the largest bend relief available is 14.5 mm.
for FSG model, standard cable diameter reduced as follow: 0B series (D52) = 4.7 mm, 2B series (D92) = 8.6 mm. For larger diameter use a “K” type
collet, please check online Part Search for additional details.
www.lemo.com
67
®
®
C and K type collets for K series
C type
K type
oversize
cable collet
Reference
Type Code
10
Collet ø
Cable ø
Reference
Type Code
70
Collet ø
Cable ø
Notes
Notes
ø A
ø B
max.
min.
ø A
ø B
max.
min.
1)
1)
1)
C
1.6
1.6
2.1
3.1
3.1
4.2
4.2
5.2
5.2
–
–
1.2
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
1.0
1.3
1.6
2.1
2.6
3.1
3.6
4.1
4.6
C
7.2
8.2
–
7.0
7.5
6.6
7.1
7.6
8.1
8.6
9.1
9.6
10.1
0K
2K
3K
C
C
C
C
C
C
C
C
15
20
25
30
35
40
45
50
C
C
C
K
K
K
K
75
80
85
90
95
10
11
8.2
8.2
8.6
–
–
8.2
8.0
–
9.2
8.5
4)
4)
4)
4)
–
9.2
9.0
4.2
4.2
5.2
5.2
10.2
10.2
11.2
10.2
10.2
10.6
9.5
10.0
10.5
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
K
K
K
K
K
30
35
40
45
50
55
60
65
70
75
80
85
90
95
10
11
11
12
13
14
15
3.2
4.2
–
3.0
3.5
2.6
3.1
C
C
C
C
C
C
C
C
C
C
C
K
K
K
K
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
1.6
2.2
3.2
3.2
4.2
4.2
5.2
5.2
6.2
6.2
7.2
7.2
8.2
8.2
9.2
–
–
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
1.3
1.6
2.1
2.6
3.1
3.6
4.1
4.6
5.1
5.6
6.1
6.6
7.1
7.6
8.1
–
1K
4.2
–
–
4.0
3.6
–
5.2
4.5
4.1
–
5.2
–
5.0
4.6
–
6.2
–
5.5
5.1
–
6.2
–
6.0
5.6
–
7.2
–
6.5
6.1
–
7.2
–
7.0
6.6
6.2
6.2
6.7
–
8.2
–
7.5
7.1
8.2
–
8.0
7.6
9.2
–
8.5
8.1
3)
3)
3)
3)
9.2
–
9.0
8.6
8.2
8.2
8.6
10.2
10.2
11.2
12.3
13.8
13.8
15.3
15.3
10.2
10.2
10.6
–
9.5
9.1
10.0
10.5
12.0
12.8
13.5
14.0
15.0
9.6
10.1
10.6
12.1
12.9
13.6
14.1
5)
5)
5)
5)
2)
C
C
C
C
C
C
C
C
C
C
C
15
20
25
30
35
40
45
50
55
60
65
2.2
2.2
3.2
3.2
4.2
4.2
5.2
5.2
6.2
6.2
7.2
–
–
–
–
–
–
–
–
–
–
–
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
1.3
1.6
2.1
2.6
3.1
3.6
4.1
4.6
5.1
5.6
6.1
2K
13.8
13.8
15.3
15.3
Note: all dimensions are in millimetres.
1) the inner diameter of the smallest bend relief available is 2.5 mm
(in TPU) / 1.7 mm (in silicone).
2) the inner diameter of the largest bend relief available is 14.5 mm.
3) for 2B bend relief.
4) for 3B bend relief.
5) for 4B bend relief.
68
www.lemo.com
®
®
C and K type collets for K series
C type
K type
C type
oversize
cable collet
Reference
Type Code
50
Collet ø
Cable ø
Reference
Collet ø
Cable ø
Notes
Notes
ø A
ø B
max.
min.
Type
Code
ø A
ø B
max.
min.
C
6.3
6.3
–
–
5.0
5.5
4.8
5.1
C
C
C
C
C
C
C
C
C
C
C
C
C
C
10
11
12
13
14
15
16
17
18
19
20
21
22
23
11.8
11.8
13.8
13.8
15.8
15.8
17.8
17.8
19.8
19.8
21.8
21.8
23.8
23.8
–
–
10.5
11.5
12.5
13.5
14.5
15.5
16.5
17.5
18.5
19.5
20.5
21.5
22.5
23.5
9.6
4K
5K
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
K
K
K
K
K
K
K
K
55
60
65
70
75
80
85
90
95
10
11
12
13
14
15
16
17
18
19
20
21
22
23
10.6
11.6
12.6
13.6
14.6
15.6
16.6
17.6
18.6
19.6
20.6
21.6
22.6
6.3
–
6.0
5.6
–
7.3
–
6.5
6.1
–
7.3
–
7.0
6.6
–
1)
1)
1)
1)
1)
1)
1)
1)
1)
8.3
–
7.5
7.1
–
8.3
–
8.0
7.6
–
9.3
–
8.5
8.1
–
9.3
–
9.0
8.6
–
10.8
10.8
12.3
13.8
13.8
15.3
15.3
17.8
17.8
19.8
19.8
21.8
21.8
23.8
23.8
–
9.5
9.1
–
–
10.5
12.0
12.8
13.5
14.0
15.0
16.5
17.5
18.5
19.5
20.5
21.5
22.5
23.5
9.6
–
–
10.6
12.1
12.9
13.6
14.1
15.6
16.6
17.6
18.6
19.6
20.6
21.6
22.6
–
13.8
13.8
15.3
15.3
–
23.8
23.8
2)
1)
1)
1)
1)
1)
1)
1)
1)
–
–
–
–
–
23.8
23.8
Note: all dimensions are in millimetres.
1) these collets cannot be used for connector models with nut for fitting a bend relief. No bend relief available for this cable size.
2) the inner diameter of the largest bend relief available is 14.5 mm.
www.lemo.com
69
®
®
C and K type collets for T series
C type
Reference
Type Code
27
Cable ø (mm)
max. min.
Reference
Type Code
45
Cable ø (mm)
max. min.
Notes
Notes
2.6
3.0
2.4
2.7
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
4.1
4.6
5.1
5.6
6.1
6.6
7.1
7.6
8.1
8.6
9.1
9.6
10.1
C
C
TT
0T
2T
C
31
C
C
C
C
C
C
C
C
K
K
K
K
50
55
60
65
70
75
80
85
90
95
10
11
1)
1)
1)
1.2
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
1.0
1.3
1.6
2.1
2.6
3.1
3.6
4.1
4.6
5.1
5.6
6.1
C
C
C
C
C
C
C
C
K
K
K
K
10
15
20
25
30
35
40
45
50
55
60
65
4)
4)
4)
4)
2)
2)
2)
2)
3.0
3.5
2.6
3.1
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
K
K
K
K
K
30
35
40
45
50
55
60
65
70
75
80
85
90
95
10
11
11
12
13
14
15
3T
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
1.3
1.6
2.1
2.6
3.1
3.6
4.1
4.6
5.1
5.6
6.1
6.6
7.1
7.6
8.1
C
C
C
C
C
C
C
C
C
C
C
K
K
K
K
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
1T
4.0
3.6
4.5
4.1
5.0
4.6
5.5
5.1
6.0
5.6
6.5
6.1
7.0
6.6
7.5
7.1
8.0
7.6
8.5
8.1
9.0
8.6
3)
3)
3)
3)
9.5
9.1
10.0
10.5
12.0
12.8
13.5
14.0
15.0
9.6
10.1
10.6
12.1
12.9
13.6
14.1
1.5
2.0
2.5
3.0
3.5
4.0
1.3
1.6
2.1
2.6
3.1
3.6
C
C
C
C
C
C
15
20
25
30
35
40
2T
5)
Note: all dimensions are in millimetres.
1) the inner diameter of the smallest bend relief available is 2.5 mm (in TPU) / 1.7 mm (in silicone).
2) for 1B bend relief.
3) for 2B bend relief.
4) for 3B bend relief.
5) the inner diameter of the largest bend relief available is 14.5 mm.
70
www.lemo.com
®
®
Variant (B, K and T series)
Bend relief for B series models with collet
Need to be ordered
Bend relief for K series models with collet
Need to be ordered
Collet
Collet
Need to be ordered
separately
Need to be ordered
separately
Ref.
Z
Ref.
Z
Type
D
Code
(see pages 145 and 146)
Type
C
Code
(see pages 145 and 146)
GMA.00.lll.ll
GMB.00.lll.ll
22 to 35
22 to 52
10 to 50
GMA.0B.lll.ll
00
0B
1B
XB
2B
3B
4B
0K
1K
2K
3K
4K
5K
C
K
15 to 65
70 to 85
GMA.1B.lll.ll
GMA.2B.lll.ll
Z
D
GMA.0B.lll.ll
Z
M
D
27 and 31
42 to 72
GMA.1B.lll.ll
GMA.1B.lll.ll
C
K
15 to 85
90 to 10
GMA.2B.lll.ll
GMA.3B.lll.ll
Z
Z
C
K
30 to 10
GMA.3B.lll.ll
GMA.4B.lll.ll
Z
D
52 to 72
GMA.1B.lll.ll
Z
11 to 15 2)
M
D
21 and 32
42 to 92
GMA.0B.lll.ll
GMA.2B.lll.ll
Z
Z
C
C
50 to 15 3)
10 to 14
GMA.4B.lll.ll
GMA.4B.lll.ll
M
D
52
GMA.1B.lll.ll
GMA.3B.lll.ll
Z
Z
62 to 10
M
M
D
62 to 82
92
GMA.2B.lll.ll
GMA.4B.lll.ll
GMA.4B.lll.ll
Note: all dimensions are in millimetres.
1) for D15 see page 67.
2) for K15 see page 68.
Z
Z
3) for C15 see page 69.
10 to 15 1)
D
11 to 15 1)
GMA.4B.lll.ll
5B
Bend relief for T series models with collet
Need to be ordered
Collet
Collet
Ref.
Need to be ordered
separately
Need to be ordered
separately
Ref.
Z
Type
C
Code
(see pages 145 and 146)
Type
Code
(see pages 145 and 146)
C
K
15 to 85
90 to 10
GMA.2B.lll.ll
GMA.3B.lll.ll
27 and 31
GMB.00.lll.ll
Z
Z
TT
0T
1T
2T
3T
C
K
10 to 45
50 to 65
GMA.0B.lll.ll
GMA.1B.lll.ll
C
K
30 to 10
GMA.3B.lll.ll
GMA.4B.lll.ll
Z
11 to 15 4)
C
K
15 to 65
70 to 85
GMA.1B.lll.ll
GMA.2B.lll.ll
Note: all dimensions are in millimetres.
4) for K15 see page 70.
Z
www.lemo.com
71
®
®
Colour of the bridge plug shells and connectors shell made of plastic material and aluminium alloys
Bridge plug and plastic shell
Aluminium alloys
Ref.
Colour
Anodized colour
PSU
PPSU
PA.6
Anodized colour
for bend relief collet nut
A
B
G
J
blue
white
grey
l
l
l
l
l
l
l
l
l
l
l
yellow
brown
black
red
l
M
N
R
S
T
l
l
orange
natural
green
black
natural
cream
l
l
V
L
l
l
l
X
F
Note: other anodizing colours are available for
connectors with collet nut for bend relief. Please
consult us.
l
Watertight and vacumtight socket and coupler
models (B, K and T series)
O-ring and gasket material (K and T series)
Standard connectors are delivered with silicone o-ring and
gaskets. The vacuumtight models, identified with the letter
Reference
Model
®
«PV», are delivered with Viton gaskets. Other gaskets
Watertight
Vacuumtight
material can be delivered upon special request.
YHl, HGl, HNl, HHl,
HCl, HEl, HMl, Sll
P
PV
B
K
T
Ref.
O-ring material
HGl, HEl, Sll
HGl, HEl, HMl
P
P
PV
PV
H
E
D
FPM (Viton®)
EPDM
FPM (Viton®) and collet nut for bend relief
72
www.lemo.com
®
®
S Series
S series connectors have main features as follows:
– security of the Push-Pull self-latching system
– unipole types transmitting current up to 230 A
and multipole types with up to 106 contacts
– 360° screening for full EMC shielding.
– solder or print contacts (straight or elbow)
– polarisation by stepped insert (half-moon)
fitted with male and female contacts
Metal housing models (page 76)
Fixed plug
Straight plugs
Fixed sockets
Free sockets
FAA
FFA, FFP*
PCA, PCP*
ERA
ERN
EEP
ERD
ECP
Elbow plugs
FFA
PCA
FLM
FFA, FFP*
PCA, PCP*
ERC
FLA
FLS
FFB
FFE
PZP*
ERS*
EHP
ECP
Fixed sockets
ECP
PSA, PSP
FFL*
FFF
FFS
Free coupler
EBD*
PSS
RMA
T-plug
EBS*
EBC*
Fixed coupler
FTA*
RAD
FZP*
Note: * Contact LEMO for details.
New design models (page 86)
Straight plugs
Free sockets
Elbow socket models (page 87)
Elbow sockets
FGZ
FGZ
PGZ
PGZ
EPL
EXP
Plastic housing models (page 89)
Watertight or vacuumtight models (page 91)
Straight plugs
Fixed socket
Fixed sockets
Fixed coupler
FFA, FFP
FFP
HGP
EWB
HGW
SWH
ERN
HCP
FFL
74
www.lemo.com
®
®
Part Numbering System
Plug
F F A 1 S 3 0 4 C L A C 3 2
. . .
Free socket
P C A 1 S 3 0 4 C L L C 3 2 Z
. . .
Variant: (page 121)
Cable ø: (page 115)
Collet type: (page 115)
Fixed socket
E R A 1 S 3 0 4 C L L
.
.
.
Coupler
R A D 1 S 3 0 4 C L L
.
.
.
Variant: (page 121)
Contact: (page 112)
Insulator: (page 112)
Housing: (page 112)
Model: (page 76)
Series: (page 76)
Insert configuration: (p. 103)
FFA.1S.304.CLAC32 = straight plug with cable collet, 1S series, multipole type with 4 contacts, outer shell in chrome-plated brass,
PEEK insulator, 2 male and 2 female solder contacts, C type collet for a 3.2 mm diameter cable.
PCA.1S.304.CLLC32Z = free socket, with cable collet, 1S series, multipole type with 4 contacts, outer shell in chrome-plated brass,
PEEK insulator, 2 female and 2 male solder contacts, C type collet for a 3.2 mm diameter cable and nut for fitting a bend relief.
ERA.1S.304.CLL = fixed socket, nut fixing, 1S series, multipole type with 4 contacts, outer shell in chrome-plated brass, PEEK insulator,
2 female and 2 male solder contacts.
RAD.1S.304.CLL = straight coupler, nut fixing, 1S series, multipole type with 4 contacts, outer shell in chrome-plated brass, PEEK
insulator, 2 female and 2 male contacts each end.
Part Section Showing Internal Components
Straight plug
Fixed socket
6
2
3
1
4
5
8
7
1
7
6
5
4
2
8
3
outer shell
latch sleeve
collet nut
1
2
3
4
5
6
7
8
outer shell
1
2
3
4
5
6
7
8
earthing crown
retaining ring
hexagonal nut
locking washer
insulator
centre-piece
insulator
male contact
female contact
collet
male contact
female contact
www.lemo.com
75
®
®
Metal housing models
Technical Characteristics
Mechanical and Climatical
Electrical
Characteristics
Endurance1)
Value
> 5000 cycles
Standard
Characteristics
Value
Standard
IEC 60512-5 test 9a
at 10 MHz
at 1 GHz
> 75 dB
> 40 dB
IEC 60169-1-3
IEC 60169-1-3
Shielding
efficiency
Humidity
up to 95% at 60° C
Temperature range
Resistance to vibrations
Shock resistance
- 55° C, + 250° C
Note:
The various tests have been carried out with FFA and ERA connector
pairs, with chrome-plated brass shell and PEEK insulator.
10-2000 Hz, 15g IEC 60512-4 test 6d
Detailed electrical characteristics, as well as materials and treatment are
presented in the chapter Technical Characteristics on page 182.
100 g, 6 ms
> 1000h
IP 50
IEC 60512-4 test 6c
IEC 60512-6 test 11f
IEC 60529
1)
see page 189, contact resistance after mating cycles. See page 185,
Salt spray corrosion test2)
Protection index (mated)
Climatical category
mechanical endurance latching force.
2)
for chrome plated product («C» material code).
55/175/21
IEC 60068-1
FFA Straight plug, cable collet
Reference
Dimensions (mm)
S2
Model Series
A
L
M
FFA
FFA
FFA
FFA
FFA
FFA
FFA
FFA
00
0S
1S
2S
3S
4S
5S
6S
6.4 26.0 18.0 4.5
9.0 34.5 24.5 6.5
12.0 42.5 31.5 8.5
14.8 52.0 40.0 11.0
17.8 61.0 46.0 14.0
24.8 77.0 59.0 19.0
35.0 103.0 78.0 29.0
46.0 106.0 81.0 38.0
~L
~M
S 2
M1
Cable assembly (pages 175 to 177)
1)
FFA Straight plug with oversize cable collet
Reference
Dimensions (mm)
S1
Model Series
A
B
L
M
S2
FFA
FFA
FFA
FFA
FFA
FFA
FFA
00
0S
1S
2S
3S
4S
5S
6.4 8.0 34.0 26.0 7.0 6.5
9.0 10.0 45.5 35.5 9.0 8.5
12.0 13.0 57.0 46.0 12.0 11.0
14.8 18.0 67.0 55.0 14.0 14.0
17.8 21.0 85.0 70.0 19.0 19.0
24.8 31.8 107.0 89.0 28.5 29.0
35.0 41.8 138.0 113.0 37.5 38.0
~L
~M
M2
Cable assembly (pages 175 and 178)
Note: 1) correspond to K type of collet, the fitting of oversize collets onto
this model allows them to be fitted to the cables that can be accommodated
by the next housing size up (see page 115).
S 2
S 1
76
www.lemo.com
®
®
1)
FFA Straight plug, cable collet and nut for fitting a bend relief
Reference
Dimensions (mm)
Model Series
A
L
M
S2
FFA
FFA
FFA
FFA
FFA
FFA
00
0S
1S
2S
3S
4S
6.4 26.0 18.0
9.0 34.5 24.5
12.0 42.5 31.5
6
7
9
~L
~M
14.8 52.0 40.0 12
17.8 61.0 46.0 14
24.8 77.0 59.0 20
S 2
Cable assembly (pages 175 and 176)
M1
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
FFB Straight plug, cable collet and safety locking ring
Reference
Dimensions (mm)
S2
~L
Model Series
A
L
M
~M
FFB
FFB
FFB
FFB
0S
1S
2S
3S
9.0 36.8 26.8 6.5
12.0 45.0 34.0 8.5
14.8 55.5 43.5 11.0
17.8 65.0 50.0 14.0
S 2
Cable assembly (pages 175 and 176)
M1
Note: nut for fitting a bend relief (available only for size 1S).
1)
FFE Straight plug, cable collet, front seal and nut for fitting a bend relief (protected to IP54 when mated)
Reference
Dimensions (mm)
Model Series
A
L
M
S2
~L
FFE
FFE
FFE
FFE
FFE
00
0S
1S
2S
3S
7.4 26.0 18.0
10.0 34.5 24.5
13.0 42.5 31.5
6
7
9
~M
16.0 52.0 40.0 12
19.0 61.0 46.0 14
S 2
Cable assembly (pages 175 and 176)
M1
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
www.lemo.com
77
®
®
FFF Straight plug, non-latching, cable collet
~L
Reference
Dimensions (mm)
S2
~M
Model Series
A
L
M
FFF
FFF
FFF
FFF
00
0S
1S
2S
6.4 26.0 18.0 4.5
9.0 34.5 24.5 6.5
12.0 42.5 31.5 8.5
14.8 52.0 40.0 11.0
S 2
Cable assembly (pages 175 and 176)
M1
FFS Straight plug for cable crimping
L
M
Reference
Model Series
FFS 00
Dimensions (mm)
S 1
S 2
A
L
M
S1
S2
6.4
31
23
5.5 5.5
Cable assembly (page 175)
M5
Note: Model available only with crimp backnut E31 similar to 00.250 series.
FAA Fixed plug non-latching, nut fixing
Reference
Dimensions (mm)
Model Series
A
8
B
e
E
L
–
L1)
M
S1 S3
FAA
FAA
FAA
FAA
FAA
FAA
FAA
FAA
00
0S
1S
2S
3S
4S
5S
6S
10.2 M7x0.5 2.0
15.5 9.0 6.3
9
10 12.4 M9x0.6 2.0 18.5 18.0 11.2 8.2 11
14 15.8 M12x1.0 2.5 22.5 21.7 12.5 10.5 14
18 19.2 M15x1.0 4.0 25.0 25.3 13.8 13.5 17
22 25.0 M18x1.0 4.0 31.0 29.0 17.0 16.5 22
28 34.0 M25x1.0 2.5 35.5 39.0 20.5 23.5 30
L maxi
S 3
M
40 40.0 M35x1.0 2.5 45.0
54 54.0 M48x1.5 2.5 45.0
–
–
28.0 33.5
28.0
–
–
E maxi
S 1
–
Panel cut-out (page 158)
P1
P2
Panel cut-out 6S series (page 158)
Note: 1) unipole model
78
www.lemo.com
®
®
FLC/FLM Elbow (90°) plug, cable collet
Reference
Dimensions (mm)
S1
L
M
Model Series
A
H
L
M
S2
FLC
FLM
FLM
FLM
00
0S
1S
2S
7.5 16.5 19.5 11.5 4.5
9.5 23.0 30.0 20.0 7.0
6
8
S 2
S 1
12.0 29.0 36.0 25.0 9.0 10
14.8 35.0 41.5 29.5 12.0 13
Cable assembly (pages 175 to 177)
M3
Note: FLC.00 model is used for the unipole type.
For 0S, 1S and 2S series use «D» type collet, see page 67.
FLA Elbow (90°) plug, cable collet
Reference
Dimensions (mm)
Model Series
A
A1
H
L
M
S1
S2
FLA
FLA
FLA
FLA
3S
4S
5S
6S
21
28
–
21 44.0 38.5 23.5 15
28 56.0 49.0 31.0 20
37 76.5 65.0 40.0 30
48 94.0 81.0 56.0 40
14
19
29
38
L
fig. 1
A
fig. 2
A 1
M
–
S 1
Cable assembly (pages 175 to 177)
M3
Note:
S 2
fig. 1 is used for the unipole type, fig. 2 is used for the multipole type.
l Maximum operating temperature: 120°C
FLS Elbow (90°) plug for cable crimping
L
A
M
Reference
Dimensions (mm)
Model Series
A
9
H
L
M
FLS
00
16 17.5 9.5
Cable assembly (page 175)
M6
Note: Model available only with crimp backnut E31 similar to 00.250 series.
l Maximum operating temperature: 120°C
www.lemo.com
79
®
®
ERA Fixed socket, nut fixing
Reference
Dimensions (mm)
Model Series
A
8
B
e
E
L
–
L1)
M
S1 S3
ERA
ERA
ERA
ERA
ERA
ERA
ERA
ERA
00
0S
1S
2S
3S
4S
5S
6S
10.2 M7x0.5 5.5
14.5 1.0 6.3
9
10 12.4 M9x0.6 7.0 18.5 18.0 1.2 8.2 11
14 15.8 M12x1.0 7.5 21.0 20.5 1.5 10.5 14
18 19.2 M15x1.0 8.5 24.5 23.5 1.8 13.5 17
22 25.0 M18x1.0 11.5 29.0 27.5 2.0 16.5 22
28 34.0 M25x1.0 12.0 34.0 33.5 2.5 23.5 30
L maxi
M
S 3
40 40.0 M35x1.0 15.5 45.0 78.5 3.0 33.5
54 54.0 M48x1.5 16.0 45.0 3.5 45.5
–
–
E maxi
S 1
–
P1
Panel cut-out (page 158)
Note: 1) unipole model.
Note: The 5S series is delivered with a tapered washer and a round nut.
The 6S series is delivered without a locking washer and with a round nut.
ERN Fixed socket, nut fixing, with earthing tag
L maxi
Reference
Dimensions (mm)
L1)
M
S 3
Model Series
A
B
e
E
L
M
S1 S3
ERN
ERN
ERN
ERN
0S
1S
2S
3S
10 12.4 M9x0.6 7.0 19.3 19.3 1.2 8.2 11
14 15.8 M12x1.0 7.5 22.4 22.4 1.5 10.5 14
18 19.2 M15x1.0 8.5 26.3 26.3 1.8 13.5 17
22 25.0 M18x1.0 11.5 29.8 29.8 2.0 16.5 22
E maxi
S 1
P1
Panel cut-out (page 158)
Note: 1) unipole model
ERC Fixed socket, nut fixing with slot in the flange
L maxi
S 3
M
Reference
Dimensions (mm)
Model Series
A
8
B
e
E
F
L
–
L1)
M
S1 S3
ERC
ERC
ERC
00
0S
1S
10.2 M7x0.5 5.5 1.6
14.5 1.0 6.3 9
10 12.4 M9x0.6 7.0 2.0 18.5 18.0 1.2 8.2 11
14 15.8 M12x1.0 7.5 2.5 20.2 20.5 1.5 10.5 14
S 1
E maxi
P1
Panel cut-out (page 158)
Note: 1) unipole model.
80
www.lemo.com
®
®
EHP Fixed socket, nut fixing, protruding shell
Reference
Dimensions (mm)
L maxi
S 3
L1)
M
S1 S3
M
Model Series
A
B
e
E
L
EHP
EHP
EHP
0S
1S
3S
10 12.4 M9x0.6 2.0 20.5 18.0 12.5 8.2 11
14 15.8 M12x1.0 3.5 20.2 20.5 12.0
22 25.0 M18x1.0 4.0 29.0 29.0 18.7
–
–
14
22
E maxi
S 1
P1
P2
Panel cut-out 0S series (page 158)
Panel cut-out (page 158)
Note: 1) unipole model
EEP Fixed socket, nut fixing (back panel mounting)
L maxi
P
S 1
M
S 2
Reference
Dimensions (mm)
L1)
16 16.0 M12x1.0 6.5 20.2 20.5 3.5 11 10.5 13
20 19.5 M15x1.0 4.3 24.5 23.5 3.5 13.5 15
Model Series
A
B
e
E
L
M
P
S1 S2
EEP
EEP
1S
2S
E maxi
9
P1
Panel cut-out (page 158)
Note: 1) unipole model.
ERD Fixed socket with two nuts (back panel mounting)
Reference
Dimensions (mm)
L1)
Model Series
A
B
e
E
L
M
S1 S3
L maxi
ERD
ERD
ERD
ERD
ERD
0S
1S
2S
3S
4S
12 12.4 M9x0.6 5.5 18.5 18.0 2.5 8.2 11
16 15.8 M12x1.0 6.0 20.2 20.5 3.5 10.5 14
20 19.2 M15x1.0 6.5 24.5 23.5 3.5 13.5 17
24 25.0 M18x1.0 9.0 29.0 27.5 4.5 16.5 22
30 34.0 M25x1.0 10.0 34.0 33.5 4.5 23.5 30
S 3
M
E maxi
S 1
P1
Panel cut-out (page 158)
Note: 1) unipole model.
Note: The 3S and 4S series are delivered with a conical nut.
www.lemo.com
81
®
®
ECP Fixed socket with two nuts, long threaded shell (back panel mounting)
Reference
Dimensions (mm)
L1)
L maxi
Model Series
A
B
e
E
L
M
S1 S3
M
S 3
ECP
ECP
ECP
ECP
0S
1S
2S
3S
12 12.4 M9x0.6 8.5 18.5 18.5 2.5 8.2 11
16 15.8 M12x1.0 10.0 20.2 20.5 3.5 10.5 14
20 19.2 M15x1.0 11.0 24.5 26.0 3.5 13.5 17
24 25.0 M18x1.0 14.0 29.0 30.0 4.5 16.5 22
S 1 E maxi
P1
Panel cut-out (page 158)
Note: 1) unipole model.
Note: The 3S series is delivered with a conical nut.
ECP Fixed socket with two nuts, long threaded shell, straight contact for printed circuit (back panel mounting)
Reference
Dimensions (mm)
Model Series
A
B
e
E
M
N
S1 S3
ECP
ECP
ECP
ECP
0S
1S
2S
3S
12 12.4 M9x0.6 8.5 2.5 15.0 8.2 11
16 15.8 M12x1.0 10.0 3.5 17.5 10.5 14
20 19.2 M15x1.0 11.0 3.5 20.0 13.5 17
24 25.0 M18x1.0 14.0 4.5 24.0 16.5 22
L
N
M
S 3
P1
Panel cut-out (page 158)
S 1 E maxi
P21
PCB drilling pattern (page 166)
Note: The 3S series is delivered with a conical nut.
Note: this contact type is available for all Ell socket models.
See page 167 for table of available types.
Length «L» depends on the number of contacts, see table on page 167.
ECP Fixed socket with two nuts, long threaded shell, elbow (90°) contacts for printed circuit (back panel mounting)
Reference
Dimensions (mm)
Model Series
A
B
e
E
M
N
S1 S3
L
N
ECP
ECP
ECP
ECP
0S
1S
2S
3S
12 12.4 M9x0.6 8.5 2.5 15.0 8.2 11
16 15.8 M12x1.0 10.0 3.5 17.5 10.5 14
20 19.2 M15x1.0 11.0 3.5 20.0 13.5 17
24 25.0 M18x1.0 14.0 4.5 24.0 16.5 22
S 3 S 1
M
P1
Panel cut-out (page 158)
E maxi
P24
PCB drilling pattern (page 168)
2
Note: The 3S series is delivered with a conical nut.
Note: this contact type is available for all back panel mounting socket
types. See page 168 for available types.
Length «L» depends on the number of contacts, see PCB drilling pat-
tern on page 168.
82
www.lemo.com
®
®
PCA Free socket, cable collet
Reference
Dimensions (mm)
S2
Model Series
A
L
PCA
PCA
PCA
PCA
PCA
PCA
PCA
PCA
00
0S
1S
2S
3S
4S
5S
6S
6.5 25.0 4.5
8.9 33.5 6.5
11.9 40.5 8.5
14.8 50.0 11.0
17.8 59.0 14.0
24.8 75.0 19.0
34.7 99.0 29.0
46.0 102.0 38.0
~L
S 2
Cable assembly (pages 175 to 177)
M1
1)
PCA Free socket with oversize cable collet
Reference
Model Series
Dimensions (mm)
S1
A
B
L
S2
PCA
PCA
PCA
PCA
PCA
PCA
00
0S
1S
2S
3S
4S
6.5 8.0 33.0 7.0 6.5
8.9 10.0 44.5 9.0 8.5
11.9 13.0 55.0 12.0 11.0
14.8 18.0 65.0 14.0 14.0
17.8 21.0 83.0 19.0 19.0
24.8 31.8 105.0 28.5 29.0
~L
Cable assembly (pages 175 and 178)
M2
S 2
S 1
Note: 1) correspond to K type of collet, the fitting of oversize collets onto
this model allows them to be fitted to the cables that can be accommodated
by the next housing size up (see page 115).
1)
PCA Free socket, cable collet and nut for fitting a bend relief
Reference
Model Series
Dimensions (mm)
A
L
S2
PCA
PCA
PCA
PCA
PCA
PCA
00
0S
1S
2S
3S
4S
6.5 25.0
8.9 33.5
11.9 40.5
6
7
9
~L
14.8 50.0 12
17.8 59.0 14
24.8 75.0 20
S 2
Cable assembly (pages 175 and 176)
M1
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
www.lemo.com
83
®
®
PSA Fixed socket, nut fixing, cable collet
Reference
Dimensions (mm)
Model Series
A
8
B
e
E
L
M
S1 S2 S3
PSA
PSA
PSA
PSA
PSA
PSA
PSA
PSA
00
0S
1S
2S
3S
4S
5S
6S
10.2 M7x0.5 5.5 25.0 1.0 6.3 4.5
9
10 12.4 M9x0.6 7.0 33.5 1.2 8.2 6.5 11
14 15.8 M12x1.0 7.5 40.5 1.5 10.5 8.5 14
18 19.2 M15x1.0 8.5 50.0 1.8 13.5 11.0 17
22 25.0 M18x1.0 11.5 59.0 2.0 16.5 14.0 22
28 34.0 M25x1.0 12.0 75.0 2.5 23.5 19.0 30
~L
M
S 3
40 40.0 M35x1.0 15.5 99.0 3.0 33.5 29.0
54 54.0 M48x1.5 16.0 102.0 3.5 45.5 38.0
–
–
S 2
E maxi
S 1
M1
P1
Cable assembly (pages 175 to 177)
Panel cut-out (page 158)
Note: the 5S series is delivered with a tapered washer and a round nut.
The 6S series is delivered without a locking washer and with a round nut.
PSP Fixed socket, nut fixing, cable collet and inner anti-rotating device
~L
M
S 3
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
S1 S2 S3
PSP
PSP
PSP
2S
3S
4S
18 19.2 M15x1.0 8.5 50.0 1.8 13.5 11.0 17
22 25.0 M18x1.0 11.5 59.0 2.0 16.5 14.0 22
28 34.0 M25x1.0 12.0 75.0 2.5 23.5 19.0 30
S 2
E maxi
S 1
M1
P1
Cable assembly (pages 175 and 176)
Panel cut-out (page 158)
PSS Fixed socket, nut fixing for cable crimping
L
S 3
M
Reference
Dimensions (mm)
Model Series
A
8
B
e
E
L
M
1
S1 S2 S3
6.3 5.5
PSS
00
10.2 M7x0.5 5.5 30
9
S 2
E maxi
S 1
M5
P1
Cable assembly (page 175)
Panel cut-out (page 158)
Note: Model available only with crimp backnut E31 similar to 00.250 series.
84
www.lemo.com
®
®
RMA Free coupler
Reference
Dim. (mm)
Model Series
A
L
RMA
RMA
RMA
RMA
RMA
RMA
RMA
00
0S
1S
2S
3S
4S
5S
6.4 22.0
8.9 25.0
~L
11.9 28.5
14.8 31.5
17.8 38.5
24.8 46.5
34.7 60.5
Note: see page 114 for the available plug and contact configurations and
in order to ensure correct contact alignment.
RAD Fixed coupler, nut fixing
Reference
Dimensions (mm)
Model Series
A
8
B
e
E
L
M
S1 S2
RAD
RAD
RAD
RAD
RAD
RAD
RAD
00
0S
1S
2S
3S
4S
5S
10.2 M7x0.5 5.5 22.0 1.0 6.3
9
10 12.4 M9x0.6 7.0 25.0 1.2 8.2 11
14 15.8 M12x1.0 7.5 28.5 1.5 10.5 14
18 19.2 M15x1.0 8.5 31.5 1.8 13.5 17
22 25.0 M18x1.0 11.5 38.5 2.0 16.5 22
L
M
S 3
28 34.0 M25x1.0 12.0 46.5 2.5
40 40.0 M35x1.0 15.5 60.5 3.0
–
–
30
–
S 1
E maxi
Panel cut-out (page 158)
P1
P2
Panel cut-out 4S and 5S series (page 158)
Note: the 5S series is delivered with a tapered washer and a round nut.
Note: See page 114 for the available plug and contact configurations
and in order to ensure correct contact alignment.
www.lemo.com
85
®
®
New design models
FGZ Straight plug, cable collet
Reference
Dimensions (mm)
~L
~M
S 1
Model Series
A
L
M
S1
S2
FGZ
FGZ
FGZ
0S
1S
2S
9.5 36
12.0 43
15.0 50
26
32
38
8
7
9
10
13
12
S 2
Cable assembly (page 169)
M1
Note: D type collets of the B series are used in this model (see page 67).
1)
FGZ Straight plug, cable collet and nut for fitting a bend relief
Reference
Dimensions (mm)
Model Series
A
L
M
S1
S2
~L
FGZ
FGZ
FGZ
0S
1S
2S
9.5 35
12.0 42
15.0 49
25
31
37
8
7
9
~M
10
13
12
Cable assembly (page 169)
M1
S 2
S 1
Note: D type collets of the B series are used in this model (see page 67).
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
PGZ Free socket, cable collet
Reference
Dim. (mm)
~L
Model Series
A
L
S1
8
S2
PGZ
PGZ
PGZ
0S
1S
2S
9.5 35.5
7
9
12.5 40.5 10
15.0 49.0 13
S 2
S 1
12
Cable assembly (page 169)
M1
Note: D type collets of the B series are used in this model (see page 67).
1)
PGZ Free socket, cable collet and nut for fitting a bend relief
Reference
Dim. (mm)
Model Series
A
L
S1
8
S2
~L
PGZ
PGZ
PGZ
0S
1S
2S
9.5 34.5
7
9
12.5 39.5 10
15.0 48.0 13
12
S 2
S 1
Cable assembly (page 169)
M1
Note: D type collets of the B series are used in this model (see page 67).
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
86
www.lemo.com
®
®
Elbow socket models
Technical Characteristics
Types
Materials and Treatment
Surface
Treat. (µm)
Component
Material
Cu Ni Au
–
PPS 1)
Housing
Brass
0.5
0.5
0.5
3
3
3
–
3
–
–
–
Metallic parts
Earthing crown
Insulator
Brass
Bronze
PEEK
Series
Type
Female contact
Bronze
0.5
1.5
1
1
2
0S, 1S
302
303
304
305
306
Note: 1) not used for all sizes.
2
2
The surface treatment standards are as follows:
– Nickel SAE AMS QQ N 290
– Gold: ISO 27874
3
3
2
1
0S, 1S
0S, 1S
1S
3
Electrical
1
2
2
3
1
4
1
2
4
3
Model Series
Types
1
2
3
1
4
5
5
2
4
3
EPL
EXP
EPL
EXP
EPL
EXP
0S
0S
1S
1S
1S
1S
302-303-304
302-303-304
305-306
1.20
1.20
0.70
4.5
4.5
4.5
1
6
1 6
2
5
1S
3
4
5
4
Note: 1) see calculation method, caution and suggested standard on
page 190.
EPL Elbow (90°) socket for printed circuit (solder or screw fixing)
Dimensions (mm)
Part number
A
9
D
H
I
K
L
N
EPL.0S.302.HLN
EPL.0S.303.HLN
EPL.0S.304.HLN
EPL.1S.302.HLN
EPL.1S.303.HLN
EPL.1S.304.HLN
EPL.1S.305.HLN
EPL.1S.306.HLN
14.6 6.7 12.6 13.3 25 11.7
L
N
K
11 16.6 7.5 14.0 13.3 27 12.6
Note: to replace the 4 ground pins by 4 screws (M1.6) add an «S» to the
end of the part number. (e.g.: EPL.1S.303.HLNS)
ø 0.7
M 1.6
D
P22
PCB drilling pattern (page 168)
www.lemo.com
87
®
®
EPL Elbow (90°) socket for printed circuit
7
5.08
L
Dimensions (mm)
Part number
A
H
I
EPL.00.113.NLN
6.8
10
7
ø 0.7
P23
PCB drilling pattern (page 168)
EPL Elbow (90°) socket for printed circuit
K
5.08
2.54
N
L
Dimensions (mm)
Part number
EPL.0S.116.DTL
A
D
H
I
K
L
N
9
8.8
16
12
9
7.7 22.7
ø 1
Note: available only in unipole version.
P23
D
PCB drilling pattern (page 168)
EXP Elbow (90°) socket for printed circuit with two nuts (solder or screw fixing)
Dimensions (mm)
Part number
A
B
D
e
E
H
I
K
L
M
N
S3
7.62
EXP.0S.302.HLN
EXP.0S.303.HLN
EXP.0S.304.HLN
EXP.1S.302.HLN
EXP.1S.303.HLN
EXP.1S.304.HLN
EXP.1S.305.HLN
EXP.1S.306.HLN
12 12.4 14.6 M9x0.6 6.0 6.7 12.6 13.3 25 2.5 11.7 11
K
L
S 3
M
14 15.0 16.6 M11x0.5 7.5 7.5 14.0 13.3 27 3.5 12.6 13
Note: to replace the 4 ground pins by 4 screws (M1.6) add an «S» to the end of the
part number. (e.g.: EXP.1S.303.HLNS).
ø 0.7
E maxi
M 1.6
P2
Panel cut-out 0S series (page 158)
Panel cut-out 1S series (page 158)
PCB drilling pattern (page 168)
D
2.54
P10
P22
88
www.lemo.com
®
®
Plastic housing models
These connectors are particularly recommended for all applications requiring maximum electrical insulation when mated. The
design, including a latch sleeve and a metal earthing crown, guarantees EMC screening efficiency to meet most requirements.
Technical Characteristics
Mechanical and Climatical
Value
Characteristics
Standard
–
PEEK
POM
PSU
PPSU
cream
> 5000 cycles
Colour
natural (beige)
black
white or grey
Endurance1)
> 5000 cycles
> 5000 cycles
> 5000 cycles
IEC 60512-5 test 9a
Humidity
up to 95% at 60° C
- 50° C/+ 250° C - 50° C/+ 115° C - 50° C/+ 150° C - 50° C/+ 180° C
–
–
Temperature range
Sterilization resistance2)
> 200 cycles
none
~20 cycles
limited
> 100 cycles
good
IEC 60601-1 § 44.7
Resistance to organic solvents very good
very good
–
Note: 1) see page 189, contact resistance after mating cycles. See page 185, mechanical endurance latching force. 2) Steam sterilization
FFA Straight plug, cable collet, PEEK or POM outer shell
FFP Straight plug, cable collet, PEEK or POM outer shell and inner anti-rotating device
~L
Reference
Dimensions (mm)
~M
Model Series
A
7
L
M
S2
6
FFA
FFP
FFP
FFP
00
1S
2S
3S
33.5 25.5
12 42.5 31.5 10
15 52.0 40.0 12
18 61.0 46.0 14
S 2
Cable assembly (pages 175 and 176)
M1
FFP Straight plug, cable collet, PEEK or POM outer shell, inner anti-rotating device
1)
and nut for fitting a bend relief
~L
Reference
Dimensions (mm)
S2
~M
Model Series
A
L
M
FFP
FFP
FFP
1S
2S
3S
12 41.5 30.5 10
15 51.0 39.0 12
18 61.0 46.0 14
S 2
Cable assembly (pages 175 and 176)
M1
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
www.lemo.com
89
®
®
FFL Straight plug, cable collet, with PSU and PPSU outer shell, inner anti-rotating device
1)
and nut for fitting a bend relief
~L
Reference
Dimensions (mm)
S2
16.5 51.5 39.5 13
~M
Model Series
A
L
M
FFL
2S
S 2
Cable assembly (page 177)
M4
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
Note: This model is fitted with a «D or M» type collet system. It is also
adapted for crimp contacts. Available only for multipole.
ERN Fixed socket, nut fixing, with earthing tag, PEEK or POM outer shell
Reference
Dimensions (mm)
L maxi
Model Series
A
9
B
e
E
L
–
L1)
M
S1 S3
M
S 3
ERN
ERN
ERN
ERN
ERN
00
0S
1S
2S
3S
10.2 M7x0.5 5.5
14.5 1.0 6.3
9
11 12.4 M9x0.6 6.4 19.3 19.3 1.8 8.2 11
14 15.8 M12x1.0 7.5 22.4 22.4 1.5 10.5 14
18 19.2 M15x1.0 8.5 26.3 26.3 2.0 13.5 17
22 25.0 M18x1.0 11.5 29.8 29.8 2.0 16.5 22
E maxi
S 1
Panel cut-out (page 158)
P1
Note: 1) unipole model
90
www.lemo.com
®
®
Watertight or vacuumtight models
These socket or coupler models allow the device on which they are fitted to reach a protection index of IP68 as per IEC
60529. They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory
equipment, aviation, etc.
These models are identified by a letter «P» at the end of the reference.
Most of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at
the end of the part number (certificate on request).
Epoxy resin is used to seal these models.
Technical Characteristics
Mechanical and Climatical
Characteristics
Endurance1)
Value
Standard
Characteristics
Value
60 bar
Standard
> 5000 cycles
IEC 60512-5 test 9a
0S
1S
2S
3S
4S
5S
6S
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
Humidity
up to 95% at 60° C
60 bar
40 bar
30 bar
15 bar
5 bar
0S-1S
2S-6S
- 20° C/ + 100° C
- 20° C/+ 80° C
Temperature range
Maximum operating
pressure3)
Salt spray corrosion test4)
Climatical category
> 1000h
20/80/21
IEC 60512-6 test 11f
IEC 60068-1
Leakage rate (He)2)
< 10-7 mbar.l.s-1 IEC 60512-7 test 14b
5 bar
Note: 1) see page 189, contact resistance after mating cycles. See page 185, mechanical endurance latching force.
2) only for vacuumtight models. Residual traces of grease used during (He) leak testing are on the o-ring. Please contact us for further details.
3) this value corresponds to the maximum allowed pressure difference for the assembled socket. 4) for chrome plated product («C» material code).
HGP Fixed socket, nut fixing, watertight or vacuumtight
Reference
Dimensions (mm)
L1)
Model Series
A
B
e
E
L
M
S1 S3
HGP
HGP
HGP
HGP
HGP
HGP
HGP
0S
1S
2S
3S
4S
5S
6S
18 15.8 M12x1.0 11.5 20.5 21.5 4.0 10.5 14
20 19.2 M14x1.0 15.5 25.0 22.0 4.0 12.5 17
20 21.5 M16x1.0 17.0 29.5 28.0 4.0 14.5 19
28 27.0 M20x1.0 18.0 33.0 34.0 6.0 18.5 24
34 34.0 M25x1.0 22.5 39.0 43.0 6.5 23.5 30
L maxi
S 3 S 1
M
45 40.0 M35x1.0 28.0 50.5 78.5 7.5 33.5
58 54.0 M48x1.5 22.0 51.0 6.0 45.5
–
–
E maxi
–
P3
Panel cut-out (page 158)
Note: 1) unipole model.
Note: The 5S and 6S series are delivered with a round nut.
HGW Fixed socket, nut fixing, with back washer, watertight or vacuumtight
L maxi
S 3
M
Reference
Dimensions (mm)
E
E
Model Series
A
B
e
L
M
S3
mini maxi
HGW
HGW
0S
1S
10 15
M9x0.6
2
2
3
4
20.5 1.2 11
25.0 1.5 14
14 18 M12x1.0
E mini/maxi
P11
Panel cut-out (page 158)
Note: vacuumtight version is only available in the 0S series.
www.lemo.com
91
®
®
EWB Fixed socket, nut fixing, with two flats on the flange, watertight or vacuumtight
Reference
Dimensions (mm)
L maxi
S 3 S 1
M
Model Series
A
B
e
E
L
L1)
–
M
S1 S3 S4
EWB
EWB
EWB
EWB
0S
1S
2S
4S
18 15.8 M12x1.0 11.0 20.5
4.0 10.5 14 14
20 19.2 M14x1.0 15.5 25.5 25.5 4.0 12.5 17 16
20 21.5 M16x1.0 17.0 28.0 26.5 4.0 14.5 19 16
34 34.0 M25x1.0 22.5 43.0
–
6.5 23.5 30 27
S 4
E maxi
Panel cut-out (page 158)
P3
Note: 1) unipole model
HCP Fixed socket, nut fixing, watertight or vacuumtight (back panel mounting)
L maxi
S 1
M
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
P
S1
–
HCP
HCP
HCP
1S
2S
4S
18 20 M14x1.0 8.6 25.5 3.5 12.0
20 20 M16x1.0 12.5 29.0 3.5 16.5 14.5
27 34 M25x1.0 15.5 41.0 4.5 20.0 23.5
E maxi
P
Panel cut-out (page 158)
P3
Note: the 2S and 4S series are delivered with a conical nut.
SWH Fixed coupler, nut fixing, watertight or vacuumtight
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
S1 S3
SWH
SWH
SWH
SWH
SWH
SWH
SWH
0S
1S
2S
3S
4S
5S
6S
14 13.8 M10x0.75 17 34 2.0 9.0 12
17 15.8 M12x1.00 28 39 2.5 10.5 14
20 21.5 M16x1.00 25 44 4.0 15.0 19
25 27.0 M20x1.00 30 53 4.0 18.5 24
34 34.0 M25x1.00 50 65 4.0 23.5 30
L
M
45 40.0 M35x1.00 58 80 5.0 33.5
58 54.0 M48x1.50 55 81 6.0 45.5
–
–
S 3
S 1
E maxi
Panel cut-out (page 158)
P4
Note: The 5S and 6S series are delivered with a round nut.
Note: see page 114 for the available plug and contact configurations and
in order to ensure correct contact alignment.
92
www.lemo.com
®
®
E Series
E series connectors have been specifically designed for outdoor applications.
They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug,
free socket, fixed socket or coupler. All models of these series are watertight when mated and give a protection index of
IP 68 as per IEC 60529 standard (in mated condition) when correctly assembled to an appropriate cable (IP 66 otherwise).
– security of the Push-Pull latching system
– unipole types transmitting current up to 230 A
and multipole types with up to 106 contacts
– wide range of models satisfying most applications
– 360° screening for full EMC shielding
– watertight connection (IP 68/IP 66)
– polarization by stepped insert (half-moon)
fitted with male and female contacts
– solder or print contacts (straight or elbow)
– rugged housing for extreme working condition.
Metal housing models (page 95)
Straight plug
Straight plugs
Fixed sockets
Free sockets
FZP*
FFA, FFP*
PCA, PCP*
ERA
ERC
EEP
EEP
EEP
Fixed plug
FFA
FFA
FFF
PCA
FAA
Elbow plug
PCA
ERB*
Fixed socket
FLM
EHP*
PSA
FLA
Free coupler
Watertight or vacuumtight models (page 101)
Fixed sockets
Fixed coupler
RMA
Note: * Contact LEMO for details.
EBR
HGP
SWH
www.lemo.com
93
®
®
Part Numbering System
F F A 1 E 3 0 4 C L A C 3 5
Plug
.
.
.
P C A 1 E 3 0 4 C L L C 3 5 Z
Free socket
.
.
.
Variant: (page 121)
Cable ø: (page 119)
Collet type: (page 119)
Fixed socket
Coupler
E R A 1 E 3 0 4 C L L
. . .
R M A 1 E 3 0 4 C L L
.
.
.
Variant: (page 121)
Contact: (page 112)
Insulator: (page 112)
Housing: (page 112)
Model: (page 95)
Series: (page 95)
Insert configuration: (p. 103)
FFA.1E.304.CLAC35 = straight plug with cable collet, 1E series, multipole type with 4 contacts, outer shell in chrome-plated brass, PEEK
insulator, 2 male and 2 female solder contacts, C type collet for a 3.5 mm diameter cable.
PCA.1E.304.CLLC35Z = free socket with cable collet, 1E series, multipole type with 4 contacts, outer shell in chrome-plated brass, PEEK
insulator, 2 female and 2 male solder contacts, C type collet for a 3.5 mm diameter cable and collet nut for fitting a bend relief.
ERA.1E.304.CLL = fixed socket, nut fixing, 1E series, multipole type with 4 contacts, outer shell in chrome-plated brass, PEEK insulator,
2 female and 2 male solder contacts.
RMA.1E.304.CLL = straight coupler, 1E series, multipole type with 4 contacts, outer shell in chrome-plated brass, PEEK insulator, 2
female and 2 male contacts each end.
Part Section Showing Internal Components
Straight plug
outer shell
latch sleeve
inner shell
Fixed socket
1
2
3
9
8
2
3
7
6
1
4
10 12 11
5
5
2
3
8
4
1
8
7
6
outer shell
1
2
3
4
5
6
7
8
retaining ring
collet nut
centre-piece
insulator
male contact
female contact
earthing cone
earthing crown
retaining ring
hexagonal nut
insulator
male contact
female contact
o-ring
4
5
6
7
8
9
10
11 collet + washer 1)
12 gasket
Note: 1) depending on models.
94
www.lemo.com
®
®
Metal housing models
Technical Characteristics
Mechanical and Climatical
Electrical
Characteristics
Endurance1)
Value
> 5000 cycles
Standard
Characteristics
Value
Standard
IEC 60512-5 test 9a
at 10 MHz
at 1 GHz
> 95 dB
> 80 dB
IEC 60169-1-3
IEC 60169-1-3
Shielding
efficiency
Humidity
up to 95% at 60° C
Temperature range2)
Resistance to vibrations
Shock resistance
- 55° C, + 200° C
Note: the various tests have been carried out with FFA and ERA connector
pairs, with chrome-plated brass shell, PEEK insulator and silicone O-ring.
Detailed electrical characteristics, as well as materials and treatment are
presented in the chapter Technical Characteristics on page 182.
10-2000 Hz, 15g IEC 60512-4 test 6d
100 g, 6 ms
> 1000h
IEC 60512-4 test 6c
IEC 60512-6 test 11f
IEC 60529
1)
see page 189, contact resistance after mating cycles. See page 185,
mechanical endurance latching force.
Salt spray corrosion test4)
Protection index (mated)3)
Climatical category
2)
minimum operating temperature is -20°C for sockets fitted with an FPM
®
(Viton ) O-ring.
IP 68/IP 66
50/175/21
3)
IP68 achieved providing that the cable is perfectly circular and that
assembly process ensures a high integrity seal.
IEC 60068-1
4)
for chrome plated product («C» material code).
FFA Straight plug, cable collet
Reference
Dimensions (mm)
Model Series
A
L
M
S2
FFA
FFA
FFA
FFA
FFA
FFA
0E
1E
2E
3E
4E
5E
6E
11
13
16
19
25
38
34 23.0
42 28.0
8
9
~L
~M
52 36.0 12
61 41.0 15
71 50.5 19
92 67.0 32
S 2
1)
FGG
47 118 89.0 38
Note: 1) with key (G)
M1
Cable assembly (pages 179 to 181)
1)
FFA Straight plug with oversize cable collet
Reference
Dimensions (mm)
Model Series
A
B
L
M
S1
S2
FFA
FFA
FFA
FFA
1E
2E
3E
4E
13 14.5 55
16 17.0 65
19 22.0 80
41
49
60
12
15
19
30
12
15
19
32
~L
~M
25 36.0 118 84
M2
Cable assembly (pages 179 and 181)
Note: 1) correspond to K type of collet, the fitting of oversize collets onto
this model allows them to be fitted to the cables that can be accommodated
by the next housing size up (see page 119).
S 2
S 1
www.lemo.com
95
®
®
1)
FFA Straight plug, cable collet and nut for fitting a bend relief
Reference
Dimensions (mm)
Model Series
A
L
M
S2
~L
FFA
FFA
FFA
FFA
FFA
0E
1E
2E
3E
4E
11
13
16
19
25
34 23.0
42 28.0
7
9
~M
52 36.0 12
60 40.0 15
71 50.5 19
S 2
Cable assembly (pages 179 and 180)
M1
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
FFF Straight plug non-latching cable collet
~L
~M
Reference
Dimensions (mm)
Model Series
A
L
M
S2
FFF
FFF
0E
1E
11
13
34
42
23
28
8
9
S 2
Cable assembly (pages 179 and 180)
M1
FAA Fixed plug non-latching, nut fixing
Reference
Dimensions (mm)
L1)
L maxi
Model Series
A
B
e
E
L
M
S1 S3
S 3
M
FAA
FAA
FAA
FAA
0E
1E
2E
3E
18 19.2 M14x1.0 3.5 19.5 19.5 13.0 12.5 17
20 21.5 M16x1.0 3.5 23.0 23.0 16.0 14.5 19
25 27.0 M20x1.0 4.0 27.0 27.0 18.0 18.5 24
31 34.0 M24x1.0 4.5 32.5 32.5 22.5 22.5 30
S 1
E maxi
Panel cut-out (page 159)
P1
Note: 1) unipole model
FLM Elbow (90°) plug, cable collet
~L
S 1
~M
Reference
Dimensions (mm)
Model Series
A
D
H
L
M
S1
S2
S3
FLM
FLM
FLM
0E
1E
2E
11
13
7.3 25
8.7 33
36
42
51
25
28
35
9
8
9
8
S 3
S 2
11
14
10
13
16 10.2 40
12
D
Cable assembly (pages 179 and 180)
M3
96
www.lemo.com
®
®
FLA Elbow (90°) plug, cable collet
~L
S 1
~M
Reference
Dimensions (mm)
S1
Model Series
A
D
H
L
M
S2
S3
S 3
S 2
FLA
FLA
3E
4E
21.0 11.5 47
27.5 15.5 57
60 40.0 18
72 51.5 24
15
19
15
20
D
Cable assembly (pages 179 and 180)
M3
ERA Fixed socket, nut fixing
Reference
Dimensions (mm)
L1)
Model Series
A
B
e
E
L
M
S1 S3
ERA
ERA
ERA
ERA
ERA
ERA
0E
1E
2E
3E
4E
5E
6E
18 19.2 M14x1.0 5.5 19.5 20.5 4.0 12.5 17
20 21.5 M16x1.0 9.0 24.0 25.3 4.5 14.5 19
25 27.0 M20x1.0 9.0 28.5 30.0 5.0 18.5 24
31 34.0 M24x1.0 11.0 34.0 35.0 6.0 22.5 30
37 40.5 M30x1.0 9.0 36.0 38.0 6.5 28.5 36
L maxi
S 3
M
55 54.0 M45x1.5 10.0 44.5 78.0 9.0 42.5
65 65.0 M55x2.0 10.5 48.5 10.0 52.0
–
–
2)
EGG
–
S 1
E maxi
Panel cut-out (page 159)
P1
1)
Note: unipole model.
2)
with key (G).
Note: The 5E and 6E series are delivered with a round nut.
ERC Fixed socket, nut fixing with slot in the flange
L maxi
S 3
M
Reference
Dimensions (mm)
Model Series
A
B
e
E
F
L
L1)
M
S1 S3
ERC
ERC
ERC
0E
3E
4E
18 19.2 M14x1.0 5.5 1.5 19.5 20.5 4.0 12.5 17
31 34.0 M24x1.0 11.0 3.0 34.0 35.0 6.0 22.5 30
37 40.5 M30x1.0 9.0 3.0 36.0 38.0 6.5 28.5 36
S 1
E maxi
Panel cut-out (page 159)
P1
Note: 1) unipole model.
www.lemo.com
97
®
®
EEP Fixed socket, nut fixing (back panel mounting)
Reference
Dimensions (mm)
L1)
18 18 M14x1.0 3.5 19.5 20.5 3.5
L maxi
P
Model Series
A
B
e
E
L
M
P
7
S1
EEP
EEP
EEP
EEP
0E
1E
2E
3E
12.5
S 1
M
20 20 M16x1.0 6.5 24.0 25.3 3.5 10 14.5
25 25 M20x1.0 6.5 28.5 30.0 3.5 10 18.5
30 31 M24x1.0 7.5 34.0 35.0 4.5 12 22.5
Panel cut-out (page 159)
P1
E maxi
Note: 1) unipole model
Note: the 3E series is delivered with a conical nut.
EEP Fixed socket, nut fixing, with straight contact for printed circuit (back panel mounting)
Reference
Dimensions (mm)
Model Series
A
B
e
E
M
N
P
7
S1
L
N
EEP
EEP
EEP
EEP
0E
1E
2E
3E
18 18 M14x1.0 3.5 3.5 16.0
12.5
P
20 20 M16x1.0 6.5 3.5 21.5 10 14.5
25 25 M20x1.0 6.5 3.5 24.0 10 18.5
30 31 M24x1.0 7.5 4.5 29.5 12 22.5
S 1
M
Panel cut-out (page 159)
P1
PCB drilling pattern (page 166)
P21
E maxi
Note: The 3E series is delivered with a conical nut.
Note: this contact type is available for all Ell socket models.
See page 167 for table of available types.
Length «L» depends on the number of contacts, see PCB drilling pattern
on page 167.
EEP Fixed socket, nut fixing, with elbow (90°) contacts for printed circuit (back panel mounting)
L
N
P
Reference
Dimensions (mm)
S 1
M
Model Series
A
B
e
E
M
N
P
S1
EEP
EEP
1E
2E
20 20 M16x1.0 6.5 3.5 21.5 10 14.5
25 25 M20x1.0 6.5 3.5 24.0 10 18.5
Panel cut-out (page 159)
P1
E maxi
PCB drilling pattern (page 168)
P24
Note: this contact type is available for all back panel mounting socket
types. See page 168 for available types.
2
Length «L» depends on the number of contacts, see PCB drilling pattern
on page 168.
98
www.lemo.com
®
®
PCA Free socket, cable collet
Reference
Dimensions (mm)
Model Series
A
L
S2
PCA
PCA
PCA
PCA
PCA
PCA
0E
1E
2E
3E
4E
5E
6E
13
15
19
23
29
42
34.0
45.0
8
9
~L
54.0 12
65.0 15
75.5 19
95.0 32
S 2
1)
PHG
52 125.0 38
1)
Note: with key (G)
Cable assembly (pages 179 to 181)
M1
1)
PCA Free socket with oversize cable collet
Reference
Model Series
Dimensions (mm)
S1
A
B
L
S2
PCA
PCA
PCA
PCA
1E
2E
3E
4E
15 14.5 58.0 12
19 17.0 67.0 15
23 22.0 84.0 19
29 36.0 109.0 30
12
15
19
32
~L
Cable assembly (page 181)
M2
Note: 1) correspond to K type of collet, the fitting of oversize collets onto
this model allows them to be fitted to the cables that can be accommodated
by the next housing size up (see page 119).
S 2
S 1
1)
PCA Free socket, cable collet and nut for fitting a bend relief
Reference
Model Series
Dimensions (mm)
A
L
S2
PCA
PCA
PCA
PCA
PCA
0E
1E
2E
3E
4E
13 34.0
15 45.0
7
9
~L
19 54.0 12
23 64.0 15
29 75.5 19
S 2
Cable assembly (pages 179 and 180)
M1
Note: 1) to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 145).
www.lemo.com
99
®
®
PSA Fixed socket, nut fixing, cable collet
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
S1 S2 S3
PSA
PSA
PSA
PSA
PSA
PSA
0E
1E
2E
3E
4E
5E
6E
18 19.2 M14x1.0 5.5 34.0 4.0 12.5
20 21.5 M16x1.0 9.0 45.0 4.5 14.5
8
9
17
19
L maxi
S 3
M
25 27.0 M20x1.0 9.0 54.0 5.0 18.5 12 24
31 34.0 M24x1.0 11.0 65.0 6.0 22.5 15 30
37 40.5 M30x1.0 9.0 75.5 6.5 28.5 19 36
51 54.0 M45x1.5 10.0 95.0 9.0
65 65.0 M55x2.0 10.5 125.0 10.0
–
–
32 54
38
1)
PKG
–
S 2
E maxi
S 1
Panel cut-out (page 159)
P1
Cable assembly (pages 179 to 181)
M1
Note: The 5E and 6E series are delivered with a round nut.
1)
Note: with key (G).
RMA Free coupler
Reference
Dim. (mm)
Model Series
A
L
RMA
RMA
RMA
RMA
RMA
RMA
0E
1E
2E
3E
4E
5E
14
16
20
25
30
44
30
40
44
54
57
67
L maxi
Note: see page 114 for the available plug and contact configurations and
in order to ensure correct contact alignment.
100
www.lemo.com
®
®
Watertight or vacuumtight models
These socket or coupler models allow the device on which they are fitted to reach a protection index of IP 68 as per IEC 60529.
They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment,
aviation, etc.
These models are identified by a letter «P» at the end of the reference.
Most of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at the
end of the part number (certificate on request).
Epoxy resin is used to seal these models.
Technical Characteristics
Mechanical and Climatical
Characteristics
Endurance1)
Value
Standard
Characteristics
Value
60 bar
Standard
> 5000 cycles
IEC 60512-5 test 9a
0E
1E
2E
3E
4E
5E
6E
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
IEC 60512-7 test 14d
Humidity
up to 95% at 60° C
60 bar
40 bar
30 bar
15 bar
5 bar
0E-1E
2E-6E
- 20° C, + 100° C
- 20° C, + 80° C
Temperature range
Maximum operating
pressure3)
Salt spray corrosion test 4)
Climatical category
> 1000h
20/80/21
IEC 60512-6 test 11f
IEC 60068-1
Leakage rate (He)2)
< 10-7 mbar.l.s-1 IEC 60512-7 test 14b
5 bar
Note: 1) see page 189, contact resistance after mating cycles. See page 185, mechanical endurance latching force.
2) only for vacuumtight models. Residual traces of grease used during (He) leak testing are on the o-ring. Please contact us for further details.
3) this value corresponds to the maximum allowed pressure difference for the assembled socket. 4) for chrome plated product («C» material code).
HGP Fixed socket, nut fixing, watertight or vacuumtight
Reference
Dimensions (mm)
L1)
Model Series
A
B
e
E
L
M
S1 S3
HGP
HGP
HGP
HGP
HGP
HGP
0E
1E
2E
3E
4E
5E
6E
18 19.2 M14x1.0 5.5 23.5 22.0 4.0 12.5 17
20 21.5 M16x1.0 9.0 29.5 28.0 4.5 14.5 19
25 27.0 M20x1.0 10.5 32.5 28.0 5.0 18.5 24
31 34.0 M24x1.0 15.5 39.5 38.5 6.0 22.5 30
37 40.5 M30x1.0 17.5 43.0 44.0 6.5 28.5 36
L maxi
S 3
M
55 54.0 M45x1.5 20.0 52.0 76.0 9.0 42.5
65 65.0 M55x2.0 20.5 52.0 10.0 52.0
–
–
2)
HGP
–
S 1
E maxi
P1
Panel cut-out (page 159)
Note: 1) unipole model.
2) with key (G).
Note: The 5E and 6E series are delivered with a round nut.
www.lemo.com
101
®
®
EBR Fixed socket with round flange, watertight, protruding shell and screw fixing
N
~L
H 1
~M
Reference
Dimensions (mm)
H1 H2
15 2.8 11.8 20.4 32.5 28
Model Series
A
B
C
L
L1)
M
N
EBR
2E
28
19 25
ø C
Panel cut-out (page 159)
P6
Note: 1) unipole model.
Note: This model is only available in a watertight version.
SWH Fixed coupler, nut fixing, watertight or vacuumtight
Reference
Dimensions (mm)
Model Series
A
B
e
E
L
M
S1 S3
SWH
SWH
SWH
SWH
SWH
SWH
0E
1E
2E
3E
4E
5E
6E
18 19.2 M14x1.0 22.5 36.0 4.0 12.5 17
20 21.5 M16x1.0 30.5 47.0 4.5 14.5 19
25 27.0 M20x1.0 28.0 52.4 5.0 18.5 24
31 34.0 M24x1.0 33.0 64.2 6.0 22.5 30
37 40.5 M30x1.0 44.5 70.0 6.5 28.5 36
L
M
S 3
55 54.0 M45x1.5 47.0 81.0 9.0 42.5
65 65.0 M55x2.0 12.0 76.0 10.0
–
–
1)
SWH
–
S 1
E maxi
Panel cut-out (page 159)
P1
1)
Note: with key (G).
Note: The 5E and 6E series are delivered with a round nut.
Note: See page 114 for the available plug and contact configurations
and in order to ensure correct contact alignment.
102
www.lemo.com
®
®
Insert configuration (S and E series)
Unipole
Solder contacts
Contact
AWG
type
Series
Crimp
113
116
120
130
140
160
112
00
–
1.3
1.6
2.0
l2)
l2)
l2)
l
–
–
–
–
–
–
–
20
18
16
26
–
18
–
0.8
1.5
1.9
1.2
2.1
2.7
8
0S
1S
0E
1E
12
18
–
–
–
1S
2S
1E
2E
3.0
3.0
l
l
–
–
–
–
–
–
12
12
–
–
–
–
1.5
2.1
2.1
3.0
25
30
1
2S
3S
4S
2E
3E
–
4.0
4.0
4.0
l
l
l
–
–
–
–
–
–
–
–
–
10
10
10
–
–
–
–
–
–
1.7
2.3
3.0
2.4
3.3
4.2
40
43
46
3S
4S
3E
4E
6.0
6.0
l
l
–
–
–
–
–
–
8
8
–
–
–
–
1.7
2.7
2.4
3.9
65
70
5S
5E
12.0
l
–
–
–
0
–
–
1.5
2.1 230
Note: 1) see calculation method, caution and suggested standard on page 190. also available with inversed contacts: plug = female, socket = male.
2)
l First choice alternative
l Special order alternative
www.lemo.com
103
®
®
Multipole
Solder contacts
Crimp contacts
Contact
type
Series
AWG
Crimp
0S
0E
1E
2E
3E
4E
5E
0E
1E
2E
3E
4E
5E
0.9
1.3
1.6
2.0
4.0
6.0
0.7
0.9
1.3
2.0
3.0
l
l
l
l
l
l
l
l
l
l
l
lꢀ
lꢀ lꢀ
lꢀ lꢀ
lꢀ lꢀ
l
l
l
–
22
20
18
16
10
8
32
26
22
–
20
18
14
–
1.1
1.2
1.7
3.0
2.1
3.7
1.0
1.2
1.5
1.5
2.1
3.7
1.6 103)
1.8 153)
2.4 204)
2
3
1S
2S
3S
4S
5S
0S
1S
2S
3S
4S
5S
1
2
1
2
302
–ꢀ
–ꢀ
–ꢀ
lꢀ
lꢀ
–ꢀ
4.2
3.0
5.2
1.5
23
35
50
73)
–
–
–
–
–
–
lꢀ lꢀ
lꢀ lꢀ
lꢀ lꢀ
l
l
l
–
26
22
20
16
12
32
32
26
–
22
20
18
–
1.8 103)
2.1 154)
2
1
1
2
303
–ꢀ
–ꢀ
lꢀ
lꢀ
2.1
3.0
5.2
20
25
3
3
–
–
–
1x6.0
2x4.0
ꢀ
–
ꢀ
ꢀ
–
ꢀ
8
10
50
35
–
–
–
3
4
1
1
–
6E
6.0
l
–ꢀ
–ꢀ
–
8
–
–
3.0
4.2
1.5
50
303
2
3
3
2
0S
1S
2S
3S
4S
5S
6S
0E
1E
2E
3E
4E
5E
–
0.7
0.9
1.3
2.0
3.0
4.0
8.0
l
l
l
l
l
l
l
lꢀ lꢀ
lꢀ lꢀ
lꢀ lꢀ
l
l
l
–
26
22
20
16
12
10
4
32
32
26
–
22
20
18
–
1.0
1.2
1.7
1.5
2.1
3.7
3.0
73)
1.8 103)
2.4 154)
2
3
1
1
4
2
–ꢀ
–ꢀ
–ꢀ
–ꢀ
lꢀ
lꢀ
–ꢀ
2.1
3.0
5.2
4.2
18
22
35
60
304
4
3
–
–
–
–
–
–
–ꢀ
–
–
–
4
2
3
1
1
4
2
–
6E
8.0
l
–ꢀ
–ꢀ
–
4
–
–
3.0
4.2
60
304
4
3
Note: 1) see calculation method, caution and suggested standard on page 190. 2) lowest measured value; contact to contact or contact to shell.
3) rated current = 6A for socket with elbow (90°) contacts for printed circuit. 4) rated current = 12A for socket with elbow (90°) contacts for printed circuit.
l First choice alternative
Special order alternative
104
www.lemo.com
®
®
Multipole
Solder contacts
Crimp contacts
Contact
type
Series
AWG
Crimp
2x0.9
3x0.7
ꢀ
ꢀ
22
26
20
22
103)
73)
1S
1E
2E
3E
4E
5E
1E
2E
3E
4E
5E
l
l
l
l
l
l
l
l
l
l
lꢀ lꢀ
l
l
32
26
–
1.5
1.5
1.5
2.1
3.0
1.2
1.5
2.1
2.1
3.0
2.1
5
6
7
8
2S
3S
4S
5S
1S
2S
3S
4S
5S
1.3
lꢀ lꢀ
20
18
–
2.1 134)
2
5
2
3
3
1
1
2x2.0
3x1.3
2x3.0
3x2.0
2x4.0
3x3.0
ꢀ
ꢀ
16
20
12
16
10
12
18
2.1
–ꢀ
lꢀ
–
305
306
307
308
ꢀ
14
4
4
5
ꢀ
ꢀ
22
16
35
25
–ꢀ
lꢀ
–
–
–
3.0
ꢀ
ꢀ
ꢀ
–ꢀ
–ꢀ
–
–
–
4.2
ꢀ
0.7
1.3
1.3
2.0
3.0
lꢀ lꢀ
l4)ꢀ lꢀ
l
l
–
26
20
20
16
12
32
26
–
22
18
–
1.7
2.1
3.0
3.0
4.2
73)
12
14
16
25
2
2
3
3
1
1
–ꢀ
–ꢀ
–ꢀ
lꢀ
lꢀ
–ꢀ
4
4
6
6
5
5
–
–
–
–
–
–
3x1.3
4x0.9
ꢀ
ꢀ
ꢀ
20
22
26
32
18
20
123)
93)
2S
3S
4S
2E
3E
4E
l
l
l
lꢀ lꢀ
l
–
0.8
1.0
2.1
1.2
1.5
3.0
3
3
2
ꢀ
2
4
4
1
1
1.3
–ꢀ
lꢀ
20
–
–
–
–
12
5
5
7
7
3x2.0
4x1.3
ꢀ
–ꢀ
ꢀ
ꢀ
lꢀ
ꢀ
16
20
16
13
6
6
–
2S
3S
4S
5S
2E
3E
4E
5E
0.9
1.3
1.3
3.0
l
l
l
l
lꢀ lꢀ
l
l
–
22
20
20
12
32
–
20
–
0.8
1.0
2.7
2.1
1.2
1.5
3.9
3.0
93)
10
13
22
3
2
3
2
–ꢀ
–ꢀ
–ꢀ
l
1
8
1
4
4
8
5
5
lꢀ
–ꢀ
–
–
7
6
6
7
–
–
–
9
3
3
4
4
2
2
5
5
6
1
1
4S
4E
1.3
l
–ꢀ
lꢀ
–
20
–
–
2.1
3.0
12
309
310
6
9
9
7
7
8
8
10
3
3
2
2
4
4
2S
3S
2E
3E
0.9
1.3
l
l
lꢀ lꢀ
–ꢀ lꢀ
l
l
22
20
32
–
20
–
0.8
1.0
1.2
1.5
73)
9
9
1
1
9
5
10
10
5
8
8
6
6
7
7
Note: 1) see calculation method, caution and suggested standard on page 190. 2) lowest measured value; contact to contact or contact to shell.
3) rated current = 6A for socket with elbow (90°) contacts for printed circuit. 4) only for FFL model.
l First choice alternative
Special order alternative
www.lemo.com
105
®
®
Multipole
Solder contacts
Crimp contacts
Contact
type
Series
AWG
Crimp
10
12
12
12
13
13
14
3
4
3
4
2
2
5
5
4S
4E
5E
1.3
2.0
l
l
–ꢀ
–ꢀ
lꢀ
–
–
20
16
–
–
–
–
2.1
2.1
3.0
3.0
11
18
1
1
3
1
310
312
312
312
313
313
314
6
6
10
10
7
7
5S
–ꢀ
9
9
8
8
2
1
1
2
6
3
7
6
3S
3E
0.9
l
–ꢀ
lꢀ
l
22
–
–
1.5
2.1
8
10
10
7
11
12
12
11
3
4S
6S
–
4E
–
1.3
4.0
5.0
l
l
l
–
lꢀ
–ꢀ
–ꢀ
–
–
–
20
10
8
–
–
–
–
–
–
2.1
2.1
2.1
3.0
3.0
3.0
9
3
4
4
2
2
5
5
1
11
11
–ꢀ
–ꢀ
22
22
12
8
6
12
8
6
10
10
7
7
9
9
6E
4
4
3
3
5
5
2
2
6
6
1
1
5S
3S
4S
3S
5E
3E
–
2.0
0.9
1.3
0.9
l
l
l
l
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–ꢀ
lꢀ
lꢀ
lꢀ
–
l
–
16
22
20
22
–
–
–
–
–
–
–
–
2.1
1.5
2.1
1.5
3.0
2.1
3.0
2.1
18
7
7
12
12
8
8
11
11
9
9
10
10
3
1
1
3
7
4
8
4
8
7
11
8
11
12
13
13
12
3
3
4
4
2
2
5
10 11
11 10
5
1
1
9
12
13
12
13
6
6
9
9
7
8
7
8
3
1
1
3
7
4
8
4
8
7
3E
l
7
11
11
12
14
14
12
Note: 1) see calculation method, caution and suggested standard on page 190. 2) lowest measured value; contact to contact or contact to shell.
l First choice alternative
Special order alternative
106
www.lemo.com
®
®
Multipole
Solder contacts
Crimp contacts
Contact
type
Series
AWG
Crimp
14
14
16
16
16
18
18
3
3
4
4
2
2
5
5
12
11
14
11
14
12
13
1
1
4S
4E
5E
1.3
l
–ꢀ
lꢀ
–
–
20
–
–
–
–
2.1
1.8
3.0
2.4
9
13
314
314
316
316
316
318
318
6
6
10
10
7
7
9
9
8
8
4
4
3
3
5
5
2
2
6
6
13
13
1
2x3.0
12x2.0
ꢀ
–ꢀ
ꢀ
ꢀ
–ꢀ
ꢀ
12
16
20
15
1
5
1
5S
l
7
7
14
14
12
12
8
8
11
11
9
9
10
10
4
1
1
4
3S
4S
3E
4E
0.9
0.9
l
l
–ꢀ
–ꢀ
lꢀ
lꢀ
l
22
22
–
–
–
–
1.0
2.1
1.5
3.0
7
7
8
5
8
12
9
9
12
–
13
16
16
13
4
4
3
3
5
5
2
2
14
14
6
6
13
11
13
1
5S
5E
6E
2.0
3.0
l
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–
–
16
12
–
–
–
–
1.8
1.5
2.4
2.1
15
14
7
7
15
15
9
12
12
16
16
8
8
11
9
10
10
3
3
2
4
11
11
4
2
10
10
12
12
13
1
5
9
9
–
l
13
5
1
16
16
8
14
15
14
8
15
6
6
7
7
4
1
1
4
3S
4S
3E
4E
0.9
0.9
l
l
–ꢀ
–ꢀ
lꢀ
lꢀ
l
22
22
–
–
–
–
1.0
2.1
1.5
3.0
6
7
9
5
5
9
14
18
10
15
10
15
14
–
18
5
5
4
4
6
6
3
3
7
7
2
2
8
8
9
17
17
2x3.0
16x1.6
ꢀ
–ꢀ
ꢀ
ꢀ
–ꢀ
ꢀ
12
18
18
11
1
1
9
5S
5E
l
–
–
–
1.8
2.4
18
18
16
16
10
10
15
15
11
11
12
14
14
12
13
13
Note: 1) see calculation method, caution and suggested standard on page 190. 2) lowest measured value; contact to contact or contact to shell.
l First choice alternative
Special order alternative
www.lemo.com
107
®
®
Multipole
Solder contacts
Crimp contacts
Contact
type
Series
AWG
Crimp
18
20
20
20
20
22
22
2
1
1
2
3
5
5
3
9
6
6
9
13
10
10
13
6S
–
4.0
0.9
1.6
3.0
3.0
0.9
l
l
l
l
l
l
l
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–ꢀ
lꢀ
–ꢀ
–
–
–
–
–
–
–
10
22
18
12
12
22
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1.2
2.1
1.8
1.5
1.5
2.1
1.8
1.8
3.0
2.4
2.1
2.1
3.0
2.4
16
318
320
320
320
320
322
322
14
16
16
14
18
17
17
18
3
1
1
3
5
4
4
5
6
10
10
6
4S
5S
6S
–
4E
5E
–
7
15
11
16
11
15
17
17
16
20
18
18
20
5
5
4
4
6
6
3
3
7
7
2
2
17
17
8
8
18
1
18
1
9
9
11
14
14
7
20
20
16
16
10
10
19
19
12
15
15
11
11
14
14
12
13
13
1
1
2
5
5
2
10
6
6
10
15
11
16
11
15
19
–ꢀ
19
16
20
20
4
4
5
3
3
5
6
2
2
6
16
15
16
17
7
1
1
7
17
18
15
6E
4E
5E
–ꢀ
18
10
8
8
14
20
12
20
14
9
19
11
19
11
9
13
13
10
12
2
1
1
2
6
3
3
6
11
7
7
11
12
16
20
4S
5S
lꢀ
16
20
12
17
17
22
21
22
21
5
5
4
4
6
6
3
3
7
7
18
18
19
19
2
2
8
8
17
17
2x3.0
20x1.6
ꢀ
–
ꢀ
ꢀ
–ꢀ
ꢀ
12
18
16
9
1
1
9
9
20
20
16
16
10
10
22
22
21
12
21
15
15
11
11
12
14
14
13
13
Note: 1) see calculation method, caution and suggested standard on page 190. 2) lowest measured value; contact to contact or contact to shell.
l First choice alternative
Special order alternative
108
www.lemo.com
®
®
Multipole
Solder contacts
Crimp contacts
Contact
type
Series
AWG
Crimp
24
24
30
30
32
36
36
4S
4E
5E
–
0.9
1.6
3.0
l
l
l
–ꢀ
–ꢀ
–ꢀ
lꢀ
–
–
–
22
18
12
–
–
–
–
–
–
2.1
2.7
1.2
3.0
3.9
1.8
7
9
3
1
1
3
7
4
4
7
8
12
12
8
5S
6S
–ꢀ
–ꢀ
17
13
18
13
18
17
324
324
330
330
332
336
336
21
21
24
22
22
24
12
5
5
4
4
6
6
3
3
7
7
19
19
2
18
18
2
8
20
20
8
9
17
1
17
24
1
9
–
6E
5E
6E
6E
5E
–
3.0
1.3
2.0
2.0
1.3
2.0
l
l
l
l
l
l
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–
–
–
–
–
–
12
20
16
16
20
16
–
–
–
–
–
–
–
–
–
–
–
–
1.2
1.8
2.1
1.5
1.8
1.5
1.8
2.4
3.0
2.1
2.4
2.1
12
21
21
16
24
16
10
10
22
22
12
23
15
15
23
11
11
14
14
12
13
13
2
1
1
2
8
3
3
8
9
15
15
22
28
9
16
16
23
22
5S
6S
–
8
28
23
29
30
30
29
1
4
4
1
9
5
5
9
15
10
10
15
21
26
16
22
10
10
7
16
21
22
26
30
27
27
30
4
1
1
4
8
5
5
8
16
9
9
16
24
17
17
24
28
25
25
28
32
29
29
32
5
1
1
5
11
18
6
6
11
18
12
12
5S
6S
19
26
25
31
25
31
19
26
32
36
36
32
3
1
1
3
7
4
4
7
12
18
8
8
12
13
19
18
13
24
29
33
19
25
24
8
25
29
30
33
30
36
34
34
36
Note: 1) see calculation method, caution and suggested standard on page 190. 2) lowest measured value; contact to contact or contact to shell.
l First choice alternative
Special order alternative
www.lemo.com
109
®
®
Multipole
Solder contacts
Crimp contacts
Contact
type
Series
AWG
Crimp
36
40
44
48
60
62
64
5
1
1
5
11
6
6
11
20
12
12
34
20
30x1.3
6x5.0
ꢀ
–
ꢀ
ꢀ
–ꢀ
ꢀ
20
8
4
30
21
21
30
35
36
36
35
–
6E
l
–
–
–
1.5
2.1
336
340
344
348
360
362
364
22
31
31
34
32
32
33
33
6
1
1
6
7
12
20
12
20
7
5S
–
5E
6E
1.3
2.0
l
l
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–
–
20
16
–
–
–
–
1.2
1.5
1.8
2.1
7
8
13
13
21
29
28
34
28
34
21
29
35
40
40
35
1
1
7
2
2
7
14
22
14
22
8
8
15
23
31
15
30
37
23
31
30
37
5S
5E
1.3
l
–ꢀ
–ꢀ
–
20
–
–
1.2
1.8
6
38
43
43
38
44
44
3
1
1
3
9
4
4
9
16
24
10
17
10
17
16
24
5S
6S
5E
6E
1.3
2.0
l
l
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–
–
20
16
–
–
–
–
1.2
1.5
1.8
2.1
6
7
32
39
45
25
25
33
40
32
39
45
33
40
48
46
46
48
6
1
1
6
13
7
7
13
21
30
14
22
14
22
21
30
39
31
31
40
48
39
47
54
6S
6E
6E
6E
1.6
1.6
1.3
l
l
l
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–
–
–
18
18
20
–
–
–
–
–
–
1.5
1.5
1.2
2.1
2.1
1.8
5
5
4
47
54
40
48
60
55
55
60
1
1
7
2
2
7
14
8
8
14
22
31
22
31
15
23
15
23
40
32
32
40
41
49
48
48
55
41
55
61
49
61
56
56
62
62
5
1
1
5
13
6
6
13
22
32
14
14
23
22
23
32
42
33
33
42
6S
51
59
43
52
43
52
51
59
64
60
60
64
Note: 1) see calculation method, caution and suggested standard on page 190. 2) lowest measured value; contact to contact or contact to shell.
l First choice alternative
Special order alternative
110
www.lemo.com
®
®
Multipole
Solder contacts
Crimp contacts
Contact
type
Series
AWG
Crimp
2
1
1
2
72
9
3
3
9
17
10
10
18
27
17
26
36
18
27
26
36
46
37
37
46
6S
6E
6E
–
1.3
0.9
0.9
l
l
l
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–ꢀ
–
–
–
20
22
22
–
–
–
–
–
–
1.2
0.8
0.8
1.8
1.2
1.2
4
2
2
372
106
106
55
63
70
47
56
64
47
56
55
63
70
64
72
71
71
72
2
1
1
2
106
106
9
3
3
9
17
10
10
17
26
36
47
59
70
80
89
97
18
27
37
48
60
71
81
90
98
26
36
47
59
70
80
89
97
104
18
27
37
48
60
71
81
90
98
–
104
106
105
105
106
3
1
1
3
11
4
4
11
20
12
12
20
30
41
53
21
31
21
31
42
30
41
42
54
66
53
65
76
86
95
54
66
77
87
96
65
6S
76
86
95
103
77
87
96
103
106
104
104
106
Note: 1) see calculation method, caution and suggested standard on page 190. 2) lowest measured value; contact to contact or contact to shell.
l First choice alternative
Special order alternative
www.lemo.com
111
®
®
Housings (S and E series)
Outer shell and collet nut
Latch sleeve + earthing crown
Other metallic components
Ref.
Remarks
Note
Material
Brass
Surf. treatment
chrome
Material
Surf. treatment
nickel 2)
nickel 2)
nickel 2)
nickel 2)
nickel 2)
–
Material
brass
Surf. treatment
nickel
nickel
nickel
nickel
nickel
nickel
–
C
D
N
K
S
T
brass/bronze
brass/bronze
brass/bronze
l
l
l
l
l
l
l
l
l
l
l
l
l
Brass
gold-plated
brass
Brass
nickel
brass
Brass
black chrome 3) brass/bronze
brass
Stainless steel
Stainless steel
Stainless steel
Aluminium alloy
POM (black)
PEEK (natural)
PSU
–
brass/bronze
stainless steel
stainless steel
brass/bronze
brass/bronze
brass/bronze
brass/bronze
brass/bronze
brass/bronze
brass
–
brass
U
L
–
–
stainless steel
brass
1)
anodized
nickel 2)
nickel 2)
nickel 2)
nickel 2)
nickel 2)
nickel 2)
nickel
nickel
nickel
nickel
nickel
nickel
B
G
P
R
H
–
brass
Only for FFP, ERN and PCP (S series)
Only for FFP, ERN and PCP (S series)
Only for FFL (S series) 1)
–
brass
–
–
brass
PPSU
brass
Only for FFL (S series) 1)
PPS/brass
–/nickel
brass
Only for EPL and EXP (S series)
N1)ote: detailed characteristics of these materials and treatments are presented on page 182.
see «variant» for the colour.
3) surface not conductive use socket with earthing tag (ERN model) to carry shield.
l First choice alternative
l Special order alternative
2) in the E series, the latch sleeve is chrome-plated.
Insulators (S and E series)
Ref.
Material
PEEK
Contact type
Remarks
Note
L
Y
T
T
V
N
Solder or print
Crimp
l
l
l
l
l
l
PEEK
PTFE
FEP
Solder
only for unipole types
Solder
only for multipole types of the S or E series
only for multipole types of the S or E series
PI
Solder
PA6.6
Solder
material for 5S/5E and 6S/6E series multipole inserts
Note: detailed characteristics of these materials are presented on page 187.
l First choice alternative
l Special order alternative
Contacts (S and E series)
Soldering characteristics
Crimping characteristics
– no need to order specific tools, a simple soldering iron
– practical, quick contact fixing outside the insulator
– possible use at high temperature
– need to order specific tools
is sufficient
– ideal for very small and fragile conductors
– contacts with solder cups to allow the solder to flow
– no risk of heating the insulator during the conductor-
contact fixing
– high tensile strength
– totally lead-free solution
Note: see page 188 for more information.
112
www.lemo.com
®
®
Contacts reference for plugs, free or fixed sockets
Conductor
AWG
Contact
Reference
Solid
Stranded
1)
(N)
Fr
Contact type
Notes
Section (mm2)
Section
ø A
ø C
Form
AWG
max.
Male Female
(mm) (mm) per fig. max.
(mm2)
min.
max.
min.
max.
0.5
0.7
0.9
1.3
1.6
2.0
3.0
4.0
5.0
6.0
8.0
0.45
0.60
0.80
1.00
1.40
1.80
2.70
3.70
5.20
5.20
7.00
–
–
–
–
–
–
–
–
–
–
–
–
1
2
1
2
2
1
2
2
1
2
1
2
28
24
22
20
16
14
10
10
–
0.09
0.25
0.34
0.50
1.00
1.50
4.00
6.00
–
–
28
–
–
0.09
0.14
0.34
0.50
1.00
1.50
4.00
6.00
10.00
10.00
21.00
50.00
0.34
0.09
0.50
0.34
0.09
1.00
0.50
0.34
1.50
1.00
2.50
1.50
–
–
Solder
–
–
26
222)
202)
18
16
12
10
8
–
–
–
–
–
ø A
ø C
ø C
–
–
–
–
–
–
l
A
L
ø A
–
–
–
–
–
–
–
–
–
–
–
–
8
–
–
–
–
–
4
–
–
12.0 11.50
–
–
–
0
–
–
C
B
C
B
G
C
B
G
C
B
C
B
M
P
0.7
0.7
0.9
0.9
0.9
1.3
1.3
1.3
1.6
1.6
2.0
2.0
0.80
0.45
1.10
0.80
0.45
1.40
1.10
0.80
1.90
1.40
2.40
1.90
–
–
26
32
24
26
32
20
24
26
18
22
16
18
222)
28
20
222)
28
18
20
222)
142)
18
122)
14
0.140
0.035
0.250
0.140
0.035
0.500
0.250
0.140
1.000
0.340
1.500
1.500
22
22
30
30
30
40
40
40
50
50
65
65
l
l
l
l
l
l
l
l
l
l
l
l
Crimp
fig. 1
fig. 2
–
–
ø A
ø C
ø C
M
P
–
–
–
–
ø A
U
M
P
–
–
–
–
–
–
ø A
ø A
ø C
ø C
U
M
P
–
–
–
–
–
–
M
P
–
–
–
–
Print
L
ø C
ø A
L dimensions and C are detailed in the section on PCB drilling pattern.
See page 167.
l
ø A
ø C
D
N
L
Print (elbow)
L
ø A
L dimensions and C are detailed in the section on PCB drilling pattern.
See page 168.
l
V
V
ø C
1)
Note: contact retention force in the insulator (according to IEC 60512-8 test 15 a).
2)
for a given AWG, the diameter of some stranded conductor designs is larger than the solder cup diameter.
Make sure that the maximum conductor diameter is smaller than ø C.
l First choice alternative
l Special order alternative
www.lemo.com
113
®
®
Contacts reference for coupler and plug with socket
Ref.
Contact type
Remarks
A
L
Male - Female
contact configuration is explained below
contact configuration is explained below
contact configuration is explained below
Female - Male
M
Female - Female
Contacts reference for fixed and free couplers RMA, RAD and SWH
Male - Female
Female - Male
Female - Female
A
L
M
Unipole
Unipole
Unipole
L
A
A
L
L
A
A
2
1
1
2
1
2
2
1
Multipole
Multipole
(odd)
A
A
A
A
A1)
A1)
(odd)
3
2
3
3
3
2
2
2
3
4
1
1
6
3
4
1
6
3
4
3
4
1
6
Multipole
Multipole
(even)
A1)
6
(even)
5
5
5
5
Use of plugs for mating with RAD, RMA and SWH couplers
Unipole type:
Reference M for coupling two identical plugs fitted with male contact (contact reference A).
Reference L for coupling a plug fitted with male contacts (contact reference A) at the flange end for RAD and SWH and
an inverted plug fitted with female contacts (contact reference L) at the other end.
Reference A for the inverted version of code L.
Multipole type:
Reference L for coupling a standard plug (contact reference A) at the flange end for RAD and SWH and an inverted plug
(contact reference as indicated in the above table) at the other end.
Reference M for coupling two standard plugs (contact type A).
Only available for RAD and RMA models.
Note: 1) this connector combination does not allow for contact numbering. One of the plugs has to be cable mounted in a way to ensure correct
signal continuity.
114
www.lemo.com
®
®
Collets (S and E series)
C, K and L type collets for S series
C type
K type
oversize
cable collet
L type
(non EMC)
Reference
Type Code
17
Collet ø
Cable ø
Reference
Type Code
22
Collet ø
Cable ø
Notes
Notes
ø A
øꢀ B
max.
min.
ø A
øꢀ B
max.
min.
2)
2)
C
1.7
2.2
2.7
3.1
3.7
4.2
2.7
3.1
1.5
–
1.7
2.2
2.7
3.1
3.7
4.4
2.6
3.0
1.3
> 1.7
> 2.2
> 2.7
> 3.2
> 3.7
2.2
L
2.2
3.2
4.2
5.2
6.2
6.6
–
–
–
–
–
–
2.2
3.2
4.2
5.2
6.2
6.5
1.2
> 2.2
> 3.2
> 4.2
> 5.2
5.9
00
0S
1S
2S
C
C
C
K
K
L
22
27
31
37
42
27
31
L
L
L
L
L
32
42
52
62
66
2)
–
2)
2.7
–
2)
1) 2)
3.7
–
2)
2)
C
C
C
C
C
C
C
C
K
K
L
27
32
42
52
62
72
82
87
97
11
32
42
52
62
72
82
87
2.7
3.2
4.2
5.2
6.2
7.2
8.2
8.7
9.7
10.5
3.2
4.2
5.2
6.2
7.2
8.2
8.7
–
–
2.7
3.2
4.2
5.2
6.2
7.2
8.2
8.7
9.7
10.5
3.2
4.2
5.2
6.2
7.2
8.2
8.7
1.3
> 2.5
> 3.2
> 4.2
> 5.2
> 6.2
> 7.2
> 8.2
> 8.7
> 9.5
2.5
L
–
2.6
3)
C
C
C
C
K
K
K
L
22
32
37
44
52
57
62
22
32
37
44
48
2.2
3.2
3.7
4.4
5.2
5.7
6.2
2.2
3.2
3.7
4.4
4.8
–
–
2.2
3.2
3.7
4.4
5.2
5.7
6.2
2.2
3.2
3.7
4.3
4.8
1.3
> 2.2
> 3.2
> 3.7
> 4.2
> 5.2
> 5.7
1.3
–
–
–
–
3.7
–
6.7
6.7
6.7
9.0
9.0
–
5.2
5.2
–
2)
2)
2)
2)
L
–
> 2.2
> 3.2
3.5
2)
L
–
L
–
> 3.2
> 4.2
> 5.2
> 6.2
> 7.2
> 8.2
1) 2)
1) 2)
2)
L
–
L
–
2)
L
–
4.4
L
–
2)
L
–
C
C
C
C
C
C
K
K
K
22
32
42
52
57
62
72
82
87
2.2
3.2
4.2
5.2
5.7
6.2
7.2
8.2
8.7
–
–
2.2
3.2
4.2
5.2
5.7
6.2
7.2
8.2
8.7
1.4
> 2.2
> 3.2
> 4.2
> 5.2
> 5.7
> 6.2
> 7.2
> 8.2
1S
2)
L
–
1) 2)
L
–
–
–
5.2
5.2
–
6.7
6.7
Note: All dimensions are in millimetres.
1) these collets cannot be used for connectors models with nut for fitting a bend relief. 2) these collets cannot be used for elbow connectors. 3) the inner
diameter of the smallest bend relief available is 2.5 mm.
www.lemo.com
115
®
®
C, K and L type collets for S series
C type
K type
oversize
cable collet
L type
(non EMC)
Reference
Type Code
42
Collet ø
Cable ø
Reference
Type Code
12
Collet ø
Cable ø
Notes
Notes
ø A
øꢀ B
max.
min.
ø A
øꢀ B
max.
min.
C
4.2
5.7
7.7
7.7
7.7
8.7
9.0
9.0
–
4.2
5.7
2.6
4.3
C
12.2
13.2
14.2
15.2
16.2
17.2
18.2
19.2
20.2
21.2
22.2
5.2
–
12.2
–
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
5.0
11.1
12.6
13.1
14.1
15.1
16.1
17.1
18.1
19.1
20.1
21.1
4.1
3S
4S
C
C
C
C
C
K
K
L
57
72
87
97
11
12
13
42
57
72
87
97
11
C
K
K
K
K
K
K
K
K
K
L
13
14
15
16
17
18
19
20
21
22
52
62
72
82
92
10
11
12
13
1)
1)
1)
1)
1)
1)
1)
1)
1)
2)
2)
2)
2)
2)
2)
2)
2)
2)
7.2
7.2
5.8
8.7
8.7
7.3
–
9.7
9.7
8.8
–
10.5
12.2
13.2
4.2
10.5
12.0
13.0
4.2
9.8
–
11.1
12.1
2.6
–
12.2
–
–
2)
2)
19.7
19.7
19.7
–
L
5.7
–
5.7
> 4.2
> 5.7
> 7.2
> 8.7
> 9.7
2)
L
7.2
–
7.2
2)
L
8.7
–
8.7
2)
L
9.7
–
9.7
L
6.2
–
6.0
5.1
1) 2)
L
10.7
–
10.7
L
7.2
–
7.0
6.1
L
8.2
–
8.0
7.1
C
C
C
C
C
C
C
52
62
72
82
92
10
11
5.2
6.2
–
–
–
–
–
–
–
5.0
6.0
4.1
5.1
4S
L
9.2
–
9.0
8.1
L
10.2
11.2
12.2
13.2
–
10.0
11.0
12.0
13.0
9.1
7.2
7.0
6.1
L
–
10.1
11.1
12.6
8.2
8.0
7.1
L
–
9.2
9.0
8.1
L
–
10.2
11.2
10.0
11.0
9.1
10.1
N1)ote: All dimensions are in millimetres.
these collets cannot be used for connectors models with nut for fitting a bend relief.
2) these collets cannot be used for elbow connectors.
116
www.lemo.com
®
®
C, K and L type collets for S series
C type
K type
oversize
cable collet
L type
(non EMC)
Reference
Type Code
72
Collet ø
Cable ø
Reference
Type Code
26
Collet ø
Cable ø
Notes
Notes
ø A
øꢀ B
max.
min.
ø A
øꢀ B
max.
min.
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
C
7.2
–
–
7.0
6.1
7.1
K
26.2
27.2
28.2
29.2
30.2
9.2
–
–
26.0
27.0
28.0
29.0
30.0
9.0
25.1
26.1
27.1
28.1
29.1
8.1
5S
5S
1)
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
K
K
K
82
92
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
8.2
8.0
K
K
K
K
L
L
L
L
L
L
L
L
L
L
L
L
L
27
28
29
30
92
10
11
12
13
14
15
16
17
18
19
20
21
1)
9.2
–
9.0
8.1
27.2
27.2
27.2
–
1)
10.2
11.2
12.2
13.2
14.2
15.2
16.2
17.2
18.2
19.2
20.2
21.2
22.2
23.2
24.2
25.2
–
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
9.1
1)
–
10.1
11.1
12.1
13.1
14.1
15.1
16.1
17.1
18.1
19.1
20.1
21.1
22.1
23.1
24.1
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
–
–
10.2
11.2
12.2
13.2
14.2
15.2
16.2
17.2
18.2
19.2
20.2
21.2
–
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
9.1
–
–
10.1
11.1
12.1
13.1
14.1
15.1
16.1
17.1
18.1
19.1
20.1
–
–
–
–
–
–
–
–
–
–
19.7
19.7
19.7
–
–
–
–
–
–
–
–
Note: All dimensions are in millimetres.
The 5S.112 is only available with L type of collet.
1) these collets cannot be used for connectors models with nut for fitting a bend relief.
2) these collets cannot be used for elbow connectors.
www.lemo.com
117
®
®
C, K and L type collets for S series
C type
K type
oversize
cable collet
L type
(non EMC)
Reference
Type Code
12
Collet ø
Cable ø
Reference
Type Code
12
Collet ø
Cable ø
Notes
Notes
ø A
øꢀ B
max.
min.
ø A
øꢀ B
max.
min.
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
1) 2)
C
12.2
13.2
14.2
15.2
16.2
17.2
18.2
19.2
20.2
21.2
22.2
23.2
24.2
25.2
26.2
27.2
28.2
29.2
30.2
–
–
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.0
28.0
29.0
30.0
11.1
12.1
13.1
14.1
15.1
16.1
17.1
18.1
19.1
20.1
21.1
22.1
23.1
24.1
25.1
26.1
27.1
28.1
29.1
L
12.2
13.2
14.2
15.2
16.2
17.2
18.2
19.2
20.2
21.2
22.2
23.2
24.2
25.2
26.2
27.2
28.2
29.2
30.2
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.0
28.0
29.0
30.0
11.1
12.1
13.1
14.1
15.1
16.1
17.1
18.1
19.1
20.1
21.1
22.1
23.1
24.1
25.1
26.1
27.1
28.1
29.1
6S
6S
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
–
–
–
–
–
–
–
–
–
–
–
–
–
–
27.2
27.2
27.2
N1)ote: All dimensions are in millimetres.
these collets cannot be used for connectors models with nut for fitting a bend relief.
2) these collets cannot be used for elbow connectors..
118
www.lemo.com
®
®
C and K type collets for E series
C type
K type
oversize
cable collet
Reference
Type Code
10
Collet ø
Cable ø
Reference
Type Code
70
Collet ø
Cable ø
Notes
Notes
ø A
ø B
max.
min.
ø A
ø B
max.
min.
1)
1)
1)
C
1.6
1.6
2.1
3.1
3.1
4.2
4.2
5.2
5.2
–
–
1.2
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
1.0
1.3
1.6
2.1
2.6
3.1
3.6
4.1
4.6
C
7.2
8.2
–
7.0
7.5
6.6
7.1
7.6
8.1
8.6
9.1
9.6
10.1
0E
2E
3E
C
C
C
C
C
C
C
C
15
20
25
30
35
40
45
50
C
C
C
K
K
K
K
75
80
85
90
95
10
11
8.2
8.2
8.6
–
–
8.2
8.0
–
9.2
8.5
4)
4)
4)
4)
–
9.2
9.0
4.2
4.2
5.2
5.2
10.2
10.2
11.2
10.2
10.2
10.6
9.5
10.0
10.5
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
K
K
K
K
K
30
35
40
45
50
55
60
65
70
75
80
85
90
95
10
11
11
12
13
14
15
3.2
4.2
–
3.0
3.5
2.6
3.1
C
C
C
C
C
C
C
C
C
C
C
K
K
K
K
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
1.6
2.2
3.2
3.2
4.2
4.2
5.2
5.2
6.2
6.2
7.2
7.2
8.2
8.2
9.2
–
–
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
1.3
1.6
2.1
2.6
3.1
3.6
4.1
4.6
5.1
5.6
6.1
6.6
7.1
7.6
8.1
–
1E
4.2
–
–
4.0
3.6
–
5.2
4.5
4.1
–
5.2
–
5.0
4.6
–
6.2
–
5.5
5.1
–
6.2
–
6.0
5.6
–
7.2
–
6.5
6.1
–
7.2
–
7.0
6.6
6.2
6.2
6.7
–
8.2
–
7.5
7.1
8.2
–
8.0
7.6
9.2
–
8.5
8.1
3)
3)
3)
3)
9.2
–
9.0
8.6
8.2
8.2
8.6
10.2
10.2
11.2
12.3
13.8
13.8
15.3
15.3
10.2
10.2
10.6
–
9.5
9.1
10.0
10.5
12.0
12.8
13.5
14.0
15.0
9.6
10.1
10.6
12.1
12.9
13.6
14.1
5)
5)
5)
5)
2)
C
C
C
C
C
C
C
C
C
C
C
15
20
25
30
35
40
45
50
55
60
65
2.2
2.2
3.2
3.2
4.2
4.2
5.2
5.2
6.2
6.2
7.2
–
–
–
–
–
–
–
–
–
–
–
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
1.3
1.6
2.1
2.6
3.1
3.6
4.1
4.6
5.1
5.6
6.1
2E
13.8
13.8
15.3
15.3
Note: all dimensions are in millimetres.
1) the inner diameter of the smallest bend relief available is 2.5 mm.
2) the inner diameter of the largest bend relief available is 14.5 mm.
3) for 2B bend relief.
4) for 3B bend relief.
5) for 4B bend relief.
www.lemo.com
119
®
®
C and K type collets for E series
C type
K type
C type
oversize
cable collet
Reference
Type Code
50
Collet ø
Cable ø
Reference
Collet ø
Cable ø
Notes
Notes
ø A
ø B
max.
min.
Type
Code
ø A
ø B
max.
min.
C
6.3
6.3
–
–
5.0
5.5
4.8
5.1
C
C
C
C
C
C
C
C
C
C
C
C
C
C
10
11
12
13
14
15
16
17
18
19
20
21
22
23
11.8
11.8
13.8
13.8
15.8
15.8
17.8
17.8
19.8
19.8
21.8
21.8
23.8
23.8
–
–
10.5
11.5
12.5
13.5
14.5
15.5
16.5
17.5
18.5
19.5
20.5
21.5
22.5
23.5
9.6
4E
5E
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
K
K
K
K
K
K
K
K
55
60
65
70
75
80
85
90
95
10
11
12
13
14
15
16
17
18
19
20
21
22
23
10.6
11.6
12.6
13.6
14.6
15.6
16.6
17.6
18.6
19.6
20.6
21.6
22.6
6.3
–
6.0
5.6
–
7.3
–
6.5
6.1
–
7.3
–
7.0
6.6
–
1)
1)
1)
1)
1)
1)
1)
1)
1)
8.3
–
7.5
7.1
–
8.3
–
8.0
7.6
–
9.3
–
8.5
8.1
–
9.3
–
9.0
8.6
–
10.8
10.8
12.3
13.8
13.8
15.3
15.3
17.8
17.8
19.8
19.8
21.8
21.8
23.8
23.8
–
9.5
9.1
–
–
10.5
12.0
12.8
13.5
14.0
15.0
16.5
17.5
18.5
19.5
20.5
21.5
22.5
23.5
9.6
–
–
10.6
12.1
12.9
13.6
14.1
15.6
16.6
17.6
18.6
19.6
20.6
21.6
22.6
–
13.8
13.8
15.3
15.3
–
23.8
23.8
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
C
C
C
C
C
C
C
C
C
L
14
15
16
17
18
21
22
23
27
30
14.2
15.2
15.7
16.7
18.2
23.2
23.2
23.2
27.2
30.2
–
–
–
–
–
–
–
–
–
–
14.0
15.0
15.5
16.5
18.0
21.5
22.0
23.0
27.0
30.0
13.0
14.1
14.6
15.6
17.1
20.6
21.1
22.1
26.1
29.5
6E
2)
1)
1)
1)
1)
1)
1)
1)
1)
–
–
–
–
–
23.8
23.8
Note: all dimensions are in millimetres.
1) these collets cannot be used for connector models with nut for fitting a bend relief. No bend relief available for this cable size.
2) the inner diameter of the largest bend relief available is 14.5 mm.
120
www.lemo.com
®
®
Variant (S and E series)
Bend relief for S series models with collet
Need to be ordered
Bend relief for E series models with collet
Need to be ordered
Collet
Collet
Need to be ordered
separately
Need to be ordered
separately
Ref.
Ref.
(see pages 145 and 146)
(see pages 145 and 146)
Type
Code
Type
C
Code
C
K
L
17 to 31
37 to 42
27 to 31
GMA.00.0ll.Dl
GMA.0B.0ll.Dl
GMA.00.0ll.Dl
Z
Z
Z
Z
Z
Z
10 to 50
GMA.0B.lll.ll
00
0S
1S
2S
3S
4S
0E
1E
2E
3E
4E
5E
Z
C
K
15 to 65
70 to 85
GMA.1B.lll.ll
GMA.2B.lll.ll
C
K
L
32 to 44
52 to 62
32 to 48
GMA.0B.0ll.Dl
GMA.1B.0ll.Dl
GMA.0B.0ll.Dl
Z
Z
Z
C
K
15 to 85
90 to 10
GMA.2B.lll.ll
GMA.3B.lll.ll
C
K
L
32 to 62
72 to 87
32 to 66
GMA.1B.0ll.Dl
GMA.2B.0ll.Dl
GMA.1B.0ll.Dl
C
K
30 to 10
11 to 15 1)
GMA.3B.lll.ll
GMA.4B.lll.ll
C
C
50 to 15 2)
10 to 14
GMA.4B.lll.ll
GMA.4B.lll.ll
C
K
L
42 to 87
97 to 11
42 to 87
GMA.2B.0ll.Dl
GMA.3B.0ll.Dl
GMA.2B.0ll.Dl
C
K
L
57 to 97
12 to 13
57 to 97
GMA.3B.0ll.Dl
GMA.4B.0ll.Dl
GMA.3B.0ll.Dl
Note: all dimensions are in millimetres.
1) for K15 see page 119.
Z
Z
2) for C15 see page 120.
C
L
82 to 13
82 to 13
GMA.4B.0ll.Dl
GMA.4B.0ll.Dl
www.lemo.com
121
®
®
Colour of connectors shell made of plastic material and aluminium alloys
Plastic shell
Aluminium alloys
Ref.
Colour
Anodized colour
PSU
PPSU
PA.6
Anodized colour
for bend relief collet nut
A
B
G
J
blue
white
grey
l
l
l
l
l
l
l
l
l
l
l
yellow
brown
black
red
l
M
N
R
S
T
l
l
orange
natural
green
black
natural
cream
l
l
V
L
l
l
l
X
F
Note: other anodizing colours are available for
connectors with collet nut for bend relief. Please
consult us.
l
Watertight and vacumtight socket and coupler models (S and E series)
Reference
Model
Watertight
Vacuumtight
EWB, HCP, HGP,
HGW, SWH
P
PV
S
E
EBR, HGP, SWH
P
PV
O-ring and gasket material (E series)
Standard connectors are delivered with silicone o-ring and gaskets. The vacuumtight models, identified with the letter
®
«PV», are delivered with Viton gaskets. Other gaskets material can be delivered upon special request.
Ref.
O-ring material
H
E
D
FPM (Viton®)
EPDM
FPM (Viton®) and collet nut for bend relief
122
www.lemo.com
®
®
M Series
The M Series connector offers a new innovative design for avionics, aerospace, military, security, motorsport and heavy
duty applications.
Made of high-strength aluminium, this connector is one of the lightest and most compact of the LEMO product line.
A one-grip ratchet screw system enables quick and secure coupling of the connectors. The arctic grip makes it easy to
manipulate the connector while wearing gloves or when the connector is located in a difficult to access area.
Features
– Ratchet-coupling mechanism
– Compact design for space savings
– Oil and fuel resistant
– Quick mating: less than 3/4 turn to seat
– Lightweight
– High vibration and shock resistance
– Sealed to IP68 when mated
– Reverse gender configuration
– Pinꢀconfiguration from 2 to 114 contacts
– 360° screening for full EMC shielding
– Colour coding / keying
– Scoop proof
– Threaded for MIL-DTL-38999L backshell
Metal housing models
Straight plugs
Fixed sockets
Free sockets
FA
FA
FA
FG
FG
FG
FM
FM
FM
EG
EG
EC
PM
PM
PV
PV
PV
PB
PB
PM
PB
FW
FW
FW
FX
FX
EC
ED
PH
PH
PH
PF
PF
PE
PE
FX
ED
Straight plugs
Fixed sockets
Fixed socket
USB models
Watertight
model
(unmated)
HE
FG
FM
EG
EG
Straight plugs
Fixed sockets
Free sockets
Fibre optic models
FM
FG
EG
ED
PM
PH
www.lemo.com
123
®
®
Part Numbering System
Plug
F M N 1 M 3 0 5 X L C
. . .
F G N 1 M 3 0 5 X L C M
.
.
.
Free socket
P M N 1 M 3 0 5 X L M T
.
.
.
Fixed socket
H E N 1 M 3 0 5 X L N P
.
.
.
Variant:
Model
T = Mold stop
P = Potted
Alignment key
Series
M = MIL-DTL-38999L shell thread
Contact
Insert configuration
Housing:
Insulator:
L = PEEK (multipole)
R = PEEK (mixed multipole)
C = Chrome-plated brass
X = Nickel-plated aluminium alloy
I = NiCorAlTM Nickel
1)
fluorocarbon polymer
2)
aluminium alloy
FMN.1M.305.XLC = straight plug with key (N), 1M series, multipole type with 5 contacts, outer shell in anthracite nickel-plated aluminium
alloy, PEEK insulator, male crimp contacts
FGN.1M.305.XLCM = straight plug with key (N), arctic grip, 1M series, multipole type with 5 contacts, outer shell in anthracite nickel-
plated aluminium alloy, PEEK insulator, male crimp contacts and with MIL-DTL-38999L thread for additional backshell (not supplied).
PMN.1M.305.XLMT = free socket with key (N), 1M series, multipole type with 5 contacts, outer shell in anthracite nickel-plated aluminium
alloy, PEEK insulator, female crimp contacts and mold stop.
HEN.1M.305.XLNP = fixed socket, nut fixing, with key (N), 1M series, multipole type with 5 contacts, outer shell in anthracite nickel-
plated aluminium alloy, PEEK insulator, female print contacts, watertight.
Note: 1) anthracite colour / 48 hours salt fog resistance. 2) anthracite colour / 500 hours salt fog resistance RoHS 2/REACH.
Part Section Showing Internal Components
5
4
6
3
2
1
1
3
2
7
5
6
4
Straight plug
Fixed socket
1
2
3
4
5
6
7
1
2
3
4
5
6
outer shell
outer shell
o-ring
insulator
male contact
rear seal
tightening screw
ratchet mechanism
spring
hexagonal nut
insulator
female contact
earthing crown
More informations on: https://www.lemo.com/catalog/ROW/UK_English/M_series.pdf
124
www.lemo.com
®
®
F Series
The F series connectors have been specially developed to meet the most demanding requirements in terms of dimen-
sions, weight and watertightness. Our manufacturing programme includes now 8 series. This series provides customers
with many features and benefits including:
– push-pull self-latching system for safe connection
– sealed to IP67 for environmental protection when mated according to IEC 60529
– compact scoop-proof design and use of aluminium alloy
– high shock and vibration resistance
– multipole types with 2 to 68 contacts or multifibre optic or mixed FO + LV in 2F series
– crimp or print contacts (straight or elbow)
– keys ensuring ease of blind mating
– colour coded key options for system security.
The F series connectors are available in 3 different materials:
– for high shock and vibration resistance, LEMO recommends using Y code material (with beryllium copper latch sleeve).
– for environmental resistance and latching cycle endurance, LEMO recommends using the C code material
(brass outershell).
– for lightweight and latching cycle endurance, LEMO recommends using X code material (aluminium shell).
– for lightweight and salt spray corrosion resistance, LEMO recommends using I code material (aluminium shell).
Each series includes several models of plugs and sockets available in contact configurations adapted to all round cables,
including up to 68 conductors, and a maximum diameter of 34 mm. Since LEMO connectors are perfectly screened and
designed to guarantee very low resistance to shell electrical continuity, they are particularly adapted to applications
where electromagnetic compatibility (EMC) is important. A large number of accessories as well as tooling for cable
assembly are available.
Metal housing models
Straight plugs
Fixed sockets
Fixed sockets
Free socket
EC
EC
G
FG
G
ED
G
EG
G
PE
PB
G
PH
G
FN
G
G
EEG
G
EH
G
EFG
Models for fibre optic
Watertight models
Fixed sockets
Straight plug
Fixed socket
FGG
EH
G
HE
G
HE
G
www.lemo.com
125
®
®
Part Numbering System
T = f.o. cable adapter and ø 5)
Z = collet nut for bend relief
T 66 Z
or
Plug
F G N 0 F 3 0 5 Y L C
. . .
Variant:
F = reduced unlatching force 1)
S = o-ring & gasket in silicone 2)
Free socket
P H N 0 F 3 0 5 X L M
.
.
.
Fixed socket
H E N 0 F 3 0 5 X L N P
.
.
.
Model
Variant 3)
Alignment key
Series
Contact 4)
Insulator: L = PEEK
Housing
Insert configuration
FGN.0F.305.YLC = straight plug with key (N), 0F series, multipole type with 5 contacts, outer shell in anthracite nickel-plated aluminium
alloy, beryllium copper latch sleeve, PEEK insulator, male crimp contacts.
PHN.0F.305.XLM = free socket with key (N), 0F series, multipole type with 5 contacts, outer shell in anthracite nickel-plated aluminium
alloy, PEEK insulator, female crimp contacts.
HEN.0F.305.XLNP = fixed socket, nut fixing, with key (N), 0F series, multipole type with 5 contacts, outer shell in anthracite nickel-plated
aluminium alloy, PEEK insulator, female print contacts, watertight.
Note: for straight plug only. 2) with shell material code X or Y. 3) potting for HEl only. 4) HEl available only with print contacts (straight or elbow).
51) connectors for fibre-optic are delivered without the fibre optic contacts, they must be ordered separately.
Part Section Showing Internal Components
Straight socket
Straight plug
5
3
2
4
1
6
1
4
5
3
5
2
6
1
2
3
4
5
6
1
2
3
4
5
6
outer shell
earthing crown
insulator
outer shell
latch sleeve
insulator
female contact
rear seal
male contact
gasket
front nut
rear seal
More informations on: https://www.lemo.com/catalog/ROW/UK_English/f_series.pdf
126
www.lemo.com
®
®
Spare parts for crimp contacts
Insulator part number
ø (mm)
Cond. AWG
min. max.
Contact part number
Types
Male contact
Female contact
A
C
Male
Female
00
302/303/304
302/303
FGG.00.30l.YL
FGG.0B.30l.YL
EGG.00.40l.YL
0.5 0.45
1
32
28
FGG.00.554.ZZC
EGG.00.654.ZZM
TT
1.10
0.9 0.80
0.45
1
2
2
1
2
24
26
32
26
32
20
22
28
22
28
FGG.0B.560.ZZC
FGG.0B.561.ZZC
FGG.0B.562.ZZC
FGG.0B.555.ZZC
FGG.0B.556.ZZC
EGG.0B.660.ZZM
EGG.0B.661.ZZM
EGG.0B.662.ZZM
EGG.0B.655.ZZM
EGG.0B.656.ZZM
0B
0K
0T
EGG.0B.40l.YL
0.80
0.7
304/305
FGG.0B.30l.YL
FGG.0B.30l.YL
EGG.0B.40l.YL
0.45
306/307/309
–
0.5 0.45
1
32
28
FGG.0B.554.ZZC
–
1.10
0.9 0.80
0.45
1
2
2
1
2
24
26
32
26
32
20
22
28
22
28
FGG.0B.560.ZZC
FGG.0B.561.ZZC
FGG.0B.562.ZZC
FGG.0B.555.ZZC
FGG.0B.556.ZZC
EGG.0B.660.ZZM
EGG.0B.661.ZZM
EGG.0B.662.ZZM
EGG.0B.655.ZZM
EGG.0B.656.ZZM
0S
302
–
–
–
–
0.80
0.7
303/304
0.45
1.40
1.3
1
2
1
2
1
2
20
24
24
26
26
32
18
20
20
22
22
28
FGG.1B.565.ZZC
FGG.1B.566.ZZC
FGG.1B.560.ZZC
FGG.1B.561.ZZC
FGG.1B.555.ZZC
FGG.1B.556.ZZC
EGG.1B.665.ZZM
EGG.1B.666.ZZM
EGG.1B.660.ZZM
EGG.1B.661.ZZM
EGG.1B.655.ZZM
EGG.1B.656.ZZM
1B
1K
1T
302/303
FGG.1B.30l.YL
FGG.1B.30l.YL
FGG.1B.30l.YL
FGG.1B.3ll.YL
EGG.1B.40l.YL
EGG.1B.40l.YL
EGG.1B.40l.YL
–
1.10
1.10
0.9
304/305
0.80
0.80
0.7
306/307/308
310/314/316
0.45
0.5 0.45
1
32
28
FGG.1B.554.ZZC
–
1.40
1.3
1
2
1
2
20
24
24
26
18
20
20
22
FGG.1B.565.ZZC
FGG.1B.566.ZZC
FGG.1B.560.ZZC
FGG.1B.561.ZZC
EGG.1B.665.ZZM
EGG.1B.666.ZZM
EGG.1B.660.ZZM
EGG.1B.661.ZZM
302
304
–
–
–
–
1S
1.10
1.10
0.9
0.80
2.40
2.0
1
2
1
2
1
2
2
1
2
2
1
2
16
18
18
22
20
24
26
24
26
32
26
32
12
14
14
18
18
20
22
20
22
28
22
28
FGG.2B.575.ZZC
FGG.2B.576.ZZC
FGG.2B.570.ZZC
FGG.2B.571.ZZC
FGG.2B.565.ZZC
FGG.2B.566.ZZC
FGG.2B.567.ZZC
FGG.2B.560.ZZC
FGG.2B.561.ZZC
FGG.2B.562.ZZC
FGG.2B.555.ZZC
FGG.2B.556.ZZC
EGG.2B.675.ZZM
EGG.2B.676.ZZM
EGG.2B.670.ZZM
EGG.2B.671.ZZM
EGG.2B.665.ZZM
EGG.2B.666.ZZM
EGG.2B.667.ZZM
EGG.2B.660.ZZM
EGG.2B.661.ZZM
EGG.2B.662.ZZM
EGG.2B.655.ZZM
EGG.2B.656.ZZM
2B
2K
2T
302
303
FGG.2B.302.YL
FGG.2B.303.YL
EGG.2B.402.YL
EGG.2B.403.YL
1.90
1.90
1.6
1.40
1.40
1.3 1.10
0.80
304/305
306/307
FGG.2B.30l.YL
EGG.2B.40l.YL
1.10
308/310
FGG.2B.3ll.YL
FGG.2B.3ll.YL
EGG.2B.4ll.YL
EGG.2B.4ll.YL
0.9 0.80
0.45
0.80
0.7
312/314/316
318/319
0.45
128
www.lemo.com
®
®
Tools for crimp contacts
FGG-EGG Crimp contacts
Positioners part number 3)
Extractors part
number for male/
female contacts
Types
Male contact
Female contact
Fig. 1
ø A
ø C
00
TT
FGG
302/303/304
DCE.91.050.0VC
DCE.91.050.0VM
DCF.91.050.2LT
DCF.91.090.2LT
EGG
ø A
ø C
0B
0K
0T
DCE.91.090.BVC
DCE.91.090.AVC
DCE.91.070.BVC
DCE.91.090.BVM
DCE.91.090.AVM
DCE.91.070.BVM
Fig. 2
302/303
ø A
ø C
FGG
304/305
DCF.92.070.3LT
DCF.91.050.2LT
EGG
ø A
ø C
306/307/309
DCE.91.050.BVC
DCE.91.050.BVM
Note: a wide variation of strand number and diameter
combinations are quoted as being AWG, some of which
do not have a large enough cross section to guarantee
a crimp as per either MIL-C-22520/1-01 or /7-01.
DCE.91.090.BVC
DCE.91.090.AVC
DCE.91.070.BVC
DCE.91.090.BVM
DCE.91.090.AVM
DCE.91.070.BVM
0S
302
DCF.93.090.4LT
DCF.91.070.2LT
FGG-EGG Insulators
303/304
FGG
EGG
1B
1K
1T
302/303
DCE.91.131.BVC
DCE.91.091.BVC
DCE.91.071.BVC
DCE.91.051.BVC
DCE.91.131.BVM
DCE.91.091.BVM
DCE.91.071.BVM
DCE.91.051.BVM
DCF.91.131.2LT
DCF.91.090.2LT
DCF.91.070.2LT
DCF.91.050.2LT
male
female
304/305
Note: each insulator can be used both for crimp con-
tacts of normal shape (fig. 1) or with reduced crimp
barrel (fig. 2).
306/307/308
310/314/316
3)
DCE Positioners ø 0.5-0.7-0.9-1.3 mm
302
304
DCE.91.131.BVC
DCE.91.091.BVC
DCE.91.131.BVM
DCE.91.091.BVM
–
–
1S
male
female
2B
2K
2T
302
303
DCE.91.202.BVCM
DCC.91.202.5LA1)
DCF.91.162.2LT
These positioners are suitable for use with both manual
and pneumatic crimping tools according to the MIL-C-
22520/7-01 standard.
DCE.91.162.BVCM
3)
DCE Turret for ø 1.6-2.0-3.0-4.0 mm
DCE.91.132.BVC
DCE.91.132.BVM
DCE.91.132.CVM
DCE.91.092.BVM
DCE.91.092.AVM
DCE.91.072.BVM
304/305
306/307
DCF.91.131.2LT
DCE.91.132.CVC
DCE.91.092.BVC
DCE.91.092.AVC
DCE.91.072.BVC
308/310
DCF.91.090.2LT
312/314/316
318/319
DCF.91.070.2LT2)
Note: these turrets can be used with manual crimping
tool according to MIL-C-22520/1-01 standard.
Note:
1) this model is thumb-operated.
DCF Automatic extraction tools
2) for inverted contacts, please use DCF.92.070.3LT instead.
3) please consult page 132 for the corresponding crimping tools.
Note: (not valid for FAl and FWl models)
www.lemo.com
129
®
®
Spare parts for crimp contacts
Insulator part number
ø (mm)
Cond. AWG
min. max.
Contact part number
Types
Male contact
Female contact
A
C
Male
Female
1.40
1
2
2
20
24
26
18
20
22
FGG.2B.565.ZZC
FGG.2B.566.ZZC
FGG.2B.567.ZZC
EGG.2B.665.ZZM
EGG.2B.666.ZZM
EGG.2B.667.ZZM
2S
306
302
–
–
1.3 1.10
0.80
3B
3K
3T
FGG.3B.302.YL
FGG.3B.30l.YL1)
FGG.3B.30l.YL
FGG.3B.3ll.YL1)
EGG.3B.402.YL
EGG.3B.40l.YL1)
EGG.3B.40l.YL
EGG.3B.4ll.YL1)
3.0 3.20
1
14
10
FGG.3B.580.ZZC
EGG.3B.680.ZZM
2.40
2.0
1
2
1
2
1
2
1
2
2
1
2
16
18
18
22
20
24
24
26
32
26
32
12
14
14
18
18
20
20
22
28
22
28
FGG.3B.575.ZZC
FGG.3B.576.ZZC
FGG.3B.570.ZZC
FGG.3B.571.ZZC
FGG.3B.565.ZZC
FGG.3B.566.ZZC
FGG.3B.560.ZZC
FGG.3B.561.ZZC
FGG.3B.562.ZZC
FGG.3B.555.ZZC
FGG.3B.556.ZZC
EGG.3B.675.ZZM
EGG.3B.676.ZZM
EGG.3B.670.ZZM
EGG.3B.671.ZZM
EGG.3B.665.ZZM
EGG.3B.666.ZZM
EGG.3B.660.ZZM
EGG.3B.661.ZZM
EGG.3B.662.ZZM
EGG.3B.655.ZZM
EGG.3B.656.ZZM
303/304/309
305/306/307
308/309/310
1.90
1.90
1.6
1.40
1.40
1.3
1.10
1.10
0.9 0.80
0.45
312/314
316/318
FGG.3B.3ll.YL
EGG.3B.4ll.YL
EGG.3B.4ll.YL
0.80
0.7
320/322/324
326/330
FGG.3B.3ll.YL
0.45
4B
4K
304
FGG.4B.304.YL
FGG.4B.30l.YL
FGG.4B.310.YL
FGG.4B.312.YL
FGG.4B.3ll.YL
FGG.4B.3ll.YL
EGG.4B.404.YL
EGG.4B.40l.YL
EGG.4B.410.YL
EGG.4B.412.YL
EGG.4B.4ll.YL
EGG.4B.4ll.YL
3.0 3.20
1
14
10
FGG.4B.580.ZZC
EGG.4B.680.ZZM
2.40
2.0
1
2
1
2
1
2
1
2
1
2
16
18
18
22
20
24
24
26
26
32
12
14
14
18
18
20
20
22
22
28
FGG.4B.575.ZZC
FGG.4B.576.ZZC
FGG.4B.570.ZZC
FGG.4B.571.ZZC
FGG.4B.565.ZZC
FGG.4B.566.ZZC
FGG.4B.560.ZZC
FGG.4B.561.ZZC
FGG.4B.555.ZZC
FGG.4B.556.ZZC
EGG.4B.675.ZZM
EGG.4B.676.ZZM
EGG.4B.670.ZZM
EGG.4B.671.ZZM
EGG.4B.665.ZZM
EGG.4B.666.ZZM
EGG.4B.660.ZZM
EGG.4B.661.ZZM
EGG.4B.655.ZZM
EGG.4B.656.ZZM
306/307
310
1.90
1.90
1.6
1.40
1.40
1.3
312
1.10
1.10
0.9
316/320
324/330
0.80
0.80
0.7
340/348
0.45
5B
5K
304
FGG.5B.304.ML
FGG.5B.310.YL
FGG.5B.3ll.YL
FGG.5B.320.YL
EGG.5B.404.ML
EGG.5B.410.YL
EGG.5B.4ll.YL
EGG.5B.420.YL
4.0 4.00
3.0 3.20
1
1
12
14
10
10
FGG.5B.582.ZZC
FGG.5B.580.ZZC
EGG.5B.682.ZZM
EGG.5B.680.ZZM
310
2.40
2.0
1
2
1
2
1
2
2
1
2
16
18
18
22
20
24
26
24
26
12
14
14
18
18
20
22
20
22
FGG.5B.575.ZZC
FGG.5B.576.ZZC
FGG.5B.570.ZZC
FGG.5B.571.ZZC
FGG.5B.565.ZZC
FGG.5B.566.ZZC
FGG.5B.567.ZZC
FGG.5B.560.ZZC
FGG.5B.561.ZZC
EGG.5B.675.ZZM
EGG.5B.676.ZZM
EGG.5B.670.ZZM
EGG.5B.671.ZZM
EGG.5B.665.ZZM
EGG.5B.666.ZZM
EGG.5B.667.ZZM
EGG.5B.660.ZZM
EGG.5B.661.ZZM
314/316
320
1.90
1.90
1.6
1.40
1.40
1.3 1.10
0.80
330/340/348
350/354/364
FGG.5B.3ll.YL
FGG.5B.3ll.YL
EGG.5B.4ll.YL
EGG.5B.4ll.YL
1.10
0.9
0.80
Note: 1) for 309 type the insulator part number is FGG.3B.309.ML (male contact) and EGG.3B.409.ML (female contact).
130
www.lemo.com
®
®
Tools for crimp contacts
FGG-EGG Crimp contacts
Positioners part number 2)
Extractors part
number for male/
female contacts
Types
Male contact
Female contact
Fig. 1
ø A
ø C
DCE.91.132.BVC
DCE.91.132.CVC
DCE.91.132.BVM
DCE.91.132.CVM
FGG
2S
306
302
–
EGG
ø A
ø C
3B
3K
3T
DCE.91.303.BVCM
DCF.91.303.5LT
DCC.91.202.5LA1)
DCF.91.163.5LT
DCF.91.133.5LT
Fig. 2
ø A
ø C
303/304/309
305/306/307
308/309/310
DCE.91.203.BVCM
DCE.91.163.BVCM
FGG
EGG
ø A
ø C
Note: a wide variation of strand number and diameter
combinations are quoted as being AWG, some of which
do not have a large enough cross section to guarantee
a crimp as per either MIL-C-22520/1-01 or /7-01.
DCE.91.133.BVC
DCE.91.133.BVM
DCE.91.093.BVC
DCE.91.093.BVM
312/314
316/318
DCF.91.093.5LT
DCF.92.070.3LT
DCE.91.093.BVG3) DCE.91.093.BVU3)
DCE.91.073.BVC DCE.91.073.BVM
FGG-EGG Insulators
320/322/324
326/330
FGG
EGG
4B
4K
304
DCE.91.304.BVCM
DCF.91.303.5LT
DCC.91.202.5LA1)
DCF.91.163.5LT
DCF.91.133.5LT
DCF.91.093.5LT
DCF.91.073.5LT
male
female
306/307
310
DCE.91.204.BVCM
DCE.91.164.BVCM
Note: each insulator can be used both for crimp con-
tacts of normal shape (fig. 1) or with reduced crimp
barrel (fig. 2).
2)
DCE Positioners ø 0.5-0.7-0.9-1.3 mm
312
DCE.91.134.BVC
DCE.91.134.BVM
DCE.91.094.BVM
DCE.91.074.BVM
316/320
324/330
DCE.91.094.BVC
DCE.91.074.BVC
340/348
male
female
5B
5K
These positioners are suitable for use with both manual
and pneumatic crimping tools according to the MIL-C-
22520/7-01 standard.
304
DCE.91.405.BVCM
DCF.91.405.5LT
DCF.91.303.5LT
DCC.91.202.5LA1)
DCF.91.163.5LT
310
DCE.91.305.BVCM
DCE.91.205.BVCM
DCE.91.165.BVCM
2)
DCE Turret for ø 1.6-2.0-3.0-4.0 mm
314/316
320
DCE.91.135.BVC
DCE.91.135.BVM
DCE.91.135.BVU
DCE.91.095.BVM
330/340/348
350/354/364
DCF.91.133.5LT
DCF.91.093.5LT
DCE.91.135.BVG
DCE.91.095.BVC
Note: these turrets can be used with manual crimping
tool according to MIL-C-22520/1-01 standard.
DCF Automatic extraction tools
Note:
1) this model is thumb-operated.
2) please consult page 132 for the corresponding crimping tools.
3) «G» and «U» positioners for reduced crimp barrel (see page 65 - fig. 2 for contact type
details).
Note: (not valid for FAl and FWl models)
www.lemo.com
131
®
®
Crimping tools for electrical contacts
Manual crimping tools
Fig. A
Part number
Supplier
LEMO
contact ø 0.5-0.7 contact ø 1.6-2.0 contact ø 3.0-4.0
0.9-1.3 (Fig. A) (Fig. B) (Fig. B)
Fig. B
DPC.91.701.V1) DPC.91.101.A2) DPC.91.102.V
MH8601)
6163361)
AF82)
M300BT
–
DANIELS
ASTRO
6157082)
1) According to specification MIL-C-22520/7-01.
2) According to specification MIL-C-22520/1-01.
Pneumatic crimping tools
Part number
Supplier
LEMO
DPC.91.701.C
85230
BALMAR
621101
BUCHANAN
According to specification MIL-C-22520/7-01.
For LEMO contacts ø 0.5-0.7-0.9-1.3 mm
DCF Automatic extraction tools for crimp contacts (for FAl and FWl models)
Extractors part
number for male
and female contacts
Contact
ø A
(mm)
Series
DCF.92.162.3LT
DCF.92.131.3LT
DCF.92.090.3LT
DCF.92.070.3LT
1.6
1.3
0.9
0.7
0B-0K
to
3B-3K
Note:
extractor for FAl of the 4B/4K and 5B/5K still need to be determinated.
132
www.lemo.com
®
®
Spare parts
GBA Locking washers
Dimensions (mm)
Part number
Series
A
C
L
GBA.00.250.FN
GBA.0S.250.FN
GBA.1S.250.FN
GBA.0E.250.FN
GBA.1E.250.FN
GBA.2S.250.FN
GBA.3S.250.FN
GBA.4S.250.FN
00-TT
0S-0B-0T
1S-1B-1T
XB
9.5 7.1 1.0
12.5 9.1 1.0
16.0 12.1 1.0
19.6 14.1 1.2
21.8 16.1 1.2
19.5 15.1 1.2
25.0 18.1 1.4
32.0 25.1 1.4
ø A
ø C
L
1E-1K
2S-2B-2T
3S-3B-3T
4S-4B
l Material: Nickel-plated bronze (3 µm)
Note: to order this accessory separately, use the above part numbers.
GBB Tapered washers
Dimensions (mm)
Part number
Series
A
C
L
GBB.00.250.LN
GBB.0S.250.LN
GBB.1S.250.LN
GBB.2S.250.LN
GBB.3S.250.LN
GBB.4S.250.LN
GBB.5S.250.LN
00
9
7.1 2.0
9.1 2.5
ø A
0S-0B
1S-1B
2S-2B
3S-3B
4S-4B
5S-5B
11
L
ø C
15 12.1 3.5
18 15.1 4.0
22 18.1 4.5
28 25.2 5.0
40 35.2 7.5
Note: sockets of series 5B and 5S are always supplied with a tapered
washer. To order this accessory separately, use the above part numbers.
The panel cut out diameters are larger when using tapered washer.
l Material: Nickel-plated brass (3 µm)
GEG Notched nut
Dimensions (mm)
Part number
Model
ø A
e
A
B
e
L
L
GEG.00.240.LC
GEG.0S.240.LC
GEG.0E.240.LC
GEG.1S.240.LC
GEG.1E.240.LC
GEG.1S.242.LC
GEG.2S.240.LC
GEG.2S.241.LC
GEG.2E.240.LC
1
1
1
1
2
1
2
2
2
8.6 10
10.5 12
15.8 18
14.0 16
17.5 20
12.1 14
17.5 20
20.5 24
22.5 25
M7 x 0.5
M9 x 0.6
2.5
2.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
M14 x 1.0
M12 x 1.0
M16 x 1.0
M11 x 0.5
M15 x 1.0
M19 x 1.0
M20 x 1.0
Model 1
ø A
e
L
l Material: Chrome-plated brass (Ni 3 µm + Cr 0.3 µm)
Note: 00, TT, 0B, 0T, 0S, 1B, 1T, 1S, 2B, 2T and 2S series fixed and
free sockets for back panel mounting are always delivered with this notched
nut. To order this accessory separately, use the above part numbers.
Model 2
www.lemo.com
133
®
®
GEA Hexagonal nuts
Dimensions (mm)
Part number
Series
A
9
B
e
L
GEA.00.240.LN
GEA.0S.240.LN
GEA.0S.241.LN
00-TT
0S-0B-0T
0S-0B
10.2
M7 x 0.50
M9 x 0.60
2.0
2.0
2.5
11 12.4
12 13.8 M10 x 0.75
0E-0K
A
e
GEA.0E.240.LN
17 19.2 M14 x 1.00
2.5
L
1S-1B-XB
1S-1B-1T
1B
GEA.1S.240.LN
GEA.1S.241.LN
14 15.8 M12 x 1.00
13 14.8 M11 x 0.50
2.5
2.5
1E-1K
GEA.1E.240.LN
19 21.5 M16 x 1.00
3.0
2S-2B
GEA.2S.240.LN
GEA.2E.240.LN
GEA.3S.240.LN
GEA.3E.240.LN
GEA.4S.240.LN
GEA.4E.240.LN
2S-2B-2T
2E-2K
17 19.2 M15 x 1.00
24 27.0 M20 x 1.00
22 25.0 M18 x 1.00
30 34.0 M24 x 1.00
30 34.0 M25 x 1.00
36 40.5 M30 x 1.00
2.7
4.0
3.0
5.0
5.0
7.0
3S-3B-3T
3E-3K
4S-4B
l Material: Nickel-plated brass (3 µm), natural anodized aluminium alloy,
4E-4K
stainless steel
Note: to order this part separately, use the above part numbers. The last letters «LN» of the part number refer to the nut material and treatment. If a nut
in aluminium alloy or stainless steel is desired, replace the last letters of the part number by «PT» or «AZ» respectively.
GEC Conical nuts
Dimensions (mm)
Part number
A
B
e
L
GEC.00.240.LC
GEC.0S.240.LC
GEC.0E.240.LC
GEC.1S.240.LC
GEC.1S.241.LC
GEC.1S.242.LC
GEC.2S.240.LC
GEC.2S.241.LC
GEC.2E.240.LC
GEC.3S.240.LC
GEC.3E.240.LC
GEC.4S.240.LC
GEC.4K.241.LC
GEC.5S.240.LC
8
10.0
M7 x 0.5
M9 x 0.6
2.5
2.5
3.0
3.2
4.0
3.2
3.8
5.8
5.0
4.5
4.5
4.5
5.0
5.0
10 12.0
16 18.0
13 16.0
17 20.0
12 14.0
17 20.0
20 24.0
22 25.0
20 24.0
27 30.0
27 30.0
32 35.5
37 41.0
A
e
M14 x 1.0
M12 x 1.0
M16 x 1.0
M11 x 0.5
M15 x 1.0
M19 x 1.0
M20 x 1.0
M18 x 1.0
M24 x 1.0
M25 x 1.0
M30 x 1.0
M35 x 1.0
L
l Material: Chrome-plated brass (Ni 3 µm + Cr 0.3 µm)
Note: 3B, 3K, 3T, 3S, 3E, 4B, 4K, 4S, 4E, 5B, 5K, 5S, 5E, 6S and 6E series
fixed and free sockets for back panel mounting are always delivered with
a conical nut. To order this accessory separately, use the part numbers
in the adjacent table.
134
www.lemo.com
®
®
GEB Round nuts
Dimensions (mm)
e
Part number
Model
A
L
ø A
e
GEB.00.240.LN
GEB.0S.240.LN
GEB.0E.240.LN
GEB.1S.240.LN
GEB.1E.240.LN
GEB.2S.240.LN
GEB.2B.240.LN
GEB.3S.240.LN
GEB.4S.240.LN
GEB.5S.240.LN
GEB.5E.240.LN
GEB.6S.241.LN
GEB.6E.240.LN
1
1
1
1
1
1
1
1
1
2
2
2
2
9.0
M7 x 0.50
M9 x 0.60
4.0
4.0
5.0
5.0
5.0
5.5
2.5
5.5
6.0
8.0
8.0
8.0
9.0
L
11.0
18.0 M14 x 1.00
14.0 M12 x 1.00
20.0 M16 x 1.00
18.0 M15 x 1.00
17.5 M15 x 0.75
22.0 M18 x 1.00
28.0 M25 x 1.00
40.0 M35 x 1.00
54.0 M45 x 1.50
54.0 M48 x 1.50
65.0 M55 x 2.00
Model 1
ø A
e
L
l Material: Nickel-plated brass (3 µm)
Note: 5B, 5K, 5S, 5E, 6S and 6E series sockets are always supplied with
model 2 round nuts. To order this accessory separately, use the part
numbers in the adjacent table.
Model 2
www.lemo.com
135
®
®
136
www.lemo.com
®
®
Accessories
BFG Plug caps
Dimensions (mm)
N1)
L
Part number
Series
A
B
L
BFG.00.100.PCSG
BFG.0B.100.PCZG
BFG.1B.100.PCZG
BFG.2B.100.PCSG
BFG.3B.100.PCSG
00
7ꢁꢀ 9ꢁ8 10ꢁ0 60
9ꢁꢀ 12ꢁꢀ 11ꢁ2 8ꢀ
12ꢁ0 1ꢀꢁꢀ 12ꢁ3 8ꢀ
1ꢀꢁ0 18ꢁ0 1ꢀꢁ0 8ꢀ
18ꢁꢀ 22ꢁ0 18ꢁꢀ 9ꢀ
0S-0B
1S-1B
2S-2B
3S-3B
N
Note: 1) the tolerance on this dimension is ꢀ mmꢁ
This cap is available only with an alignment key (G)ꢁ Upon request this
cap can be supplied in black and the last letter «G» of the part number
should be replaced with «N»ꢁ
l Body material: Polyoxymethylene (POM) grey (or black)
l Cord material: Polyamide 6, grey (or black)
l Gasket material: Silicone rubber
l Maximum operating temperature: 100°C
lꢀ Watertightness: IPꢀ1 according to IEC 60ꢀ29
Fitting the cord
Slide the plug into the loop of the cordꢁ
Place the loop into the groove in front of the collet nut and
tighten the loopꢁ
BFA Plug caps
Dimensions (mm)
Part number
Series
A
B
6
6
6
6
L
N1)
BFA.0E.100.NAS
BFA.1E.100.NAS
BFA.2E.100.NAS
BFA.3E.100.NAS
BFA.4E.100.NAS
BFA.4S.100.NAS
BFA.5E.100.NAS
BFA.5S.100.NAS
BFA.6S.100.NAS
0E
1E
2E
3E
4E
4S
ꢀE
ꢀS
6S
14ꢁ0
16ꢁ0
19ꢁꢀ
23ꢁ0
12ꢁꢀ 8ꢀ
1ꢀꢁꢀ 8ꢀ
17ꢁꢀ 8ꢀ
22ꢁ0 120
B
L
29ꢁ0 10 22ꢁꢀ 120
2ꢀꢁ0 10 22ꢁ2 120
44ꢁ0 10 27ꢁ0 1ꢀ0
36ꢁ0 10 30ꢁ2 1ꢀ0
46ꢁ0 10 33ꢁ0 1ꢀ0
sliding loop
Note: 1) the tolerance on this dimension is ꢀ mmꢁ
The last letter «S» of the part number stands for the material of the O-ring
(silicone rubber)ꢁ O-ring’s made from FPM are also available; if required,
replace the letter «S» by «V»ꢁ
l Body material: Nickel-plated brass (Ni 3µm)
l Lanyard material: Stainless steel
l Crimp ferrule material: Nickel-plated brass + polyolefin
l O-ring material: Silicone rubber or FPM
l Operating temperature: -ꢀ0°/13ꢀ°C (Silicone rubber & Polyolefine)
lꢀ Watertightness: IP68 according to IEC 60ꢀ29 for E series
138
wwwꢁlemoꢁcom
®
®
BFG Plug caps with key (G)
Dimensions (mm)
Part number
Series
A
B
6
6
6
6
L
N1)
BFG.0K.100.NAS
BFG.1K.100.NAS
BFG.2K.100.NAS
BFG.3K.100.NAS
BFG.4B.100.NAS
BFG.4K.100.NAS
BFG.5B.100.NAS
BFG.5K.100.NAS
BFG.6E.100.NAS
0K
1K
2K
3K
4B
4K
5B
5K
6E
14.0
16.0
19.5
23.0
12.5 85
15.5 85
17.5 85
22.0 120
B
L
25.0 10 20.2 120
29.0 10 22.5 120
36.0 10 27.2 150
44.0 10 27.0 150
54.0 10 31.0 150
sliding loop
Note: 1) the tolerance on this dimension is 5 mm.
l Body material: Nickel-plated brass (Ni 3µm)
l Lanyard material: Stainless steel
This cap is available only with an alignment key (G). The last letter «S»
of the part number stands for the material of the O-ring (silicone rubber).
O-ring’s made from FPM are also available; if required, replace the letter
«S» by «V».
l Crimp ferrule material: Nickel-plated brass + polyolefin
l O-ring material: Silicone rubber or FPM
l Operating temperature: -50°/135°C (Silicone rubber & Polyolefine)
lꢀ Watertightness: IP68 according to IEC 60529 for E and K series
BHG Plug caps, nut fixing or flange
Dimensions (mm)
Part number
Series
A
B
6
6
6
6
L
N1)
B
L
BHG.0K.100.NAS
BHG.1K.100.NAS
BHG.2K.100.NAS
BHG.3K.100.NAS
BHG.4B.100.NAS
BHG.4K.100.NAS
BHG.5B.100.NAS
BHG.5K.100.NAS
BHG.6E.100.NAS
0K
1K
2K
3K
4B
4K
5B
5K
6E
14.0
16.0
19.5
23.0
12.5 85
15.5 85
17.5 85
22.0 120
25.0 10 20.2 120
29.0 10 22.5 120
36.0 10 27.2 150
44.0 10 27.0 150
54.0 10 31.0 150
Note: 1) the tolerance on this dimension is 5 mm.
This cap is available only with an alignment key (G). The last letter «S»
of the part number stands for the material of the O-ring (silicone rubber).
O-ring’s made from FPM are also available; if required, replace the letter
«S» by «V».
l Body material: Nickel-plated brass (Ni 3µm)
l Lanyard material: Stainless steel
l Crimp ferrule material: Nickel-plated brass + polyolefin
l O-ring material: Silicone rubber or FPM
l Operating temperature: -50°/135°C (Silicone rubber & Polyolefine)
lꢀ Watertightness: IP68 according to IEC 60529 for E and K series
BFG Plug cap
L
Dimensions (mm)
Part number
Series
3K
A
L
N1)
BFG.3K.100.EAN
26
31 155
l Material: black ALCRYN®
l Lanyard material: Stainless steel
l Crimp ferrule material: Stainless steel AISI 304 + polyolefin
N
Note: 1) the tolerance on this dimension is 5 mm.
These caps are suitable for use with any alignment key configuration.
www.lemo.com
139
®
®
BHA Plug cap
L
Dimensions (mm)
Part number
Series
3K
A
L
N1)
BHA.3K.100.EAN
26
31 120
l Material: black ALCRYN®
N
l Lanyard material: Stainless steel
l Crimp ferrule material: Stainless steel AISI 304 + polyolefin
Note: 1) the tolerance on this dimension is ꢀ mm.
These caps are suitable for use with any alignment key configuration.
BRA Blanking caps for fixed sockets and free straight sockets
L
Dimensions (mm)
M
Part number
Series
A
B
L
M
N1)
60
60
60
60
60
BRA.00.200.PCSG
BRA.0B.200.PCSG
BRA.1B.200.PCSG
BRA.2B.200.PCSG
BRA.3B.200.PCSG
00
7.ꢀ 9.8 9.0 3.ꢀ
10.0 12.ꢀ 11.0 4.8
14.0 17.0 13.ꢀ ꢀ.6
18.0 21.0 14.ꢀ 6.0
22.0 2ꢀ.ꢀ 17.0 7.0
0S-0B
1S-1B
2S-2B
3S-3B
N
Note: 1) the tolerance on this dimension is ꢀ mm.
These caps are suitable for use with any alignment key configuration. On
request this cap can be supplied in black. If so, replace the last letter «G»
of the part number by «N».
l Body material: Polyoxymethylene (POM) grey (or black)
l Cord material: Polyamide 6, grey (or black)
l Gasket material: Silicone rubber
l Maximum operating temperature: 100°C
lꢀ Watertightness: IP61 according to IEC 60ꢀ29
BRE Blanking caps for fixed sockets
Dimensions (mm)
Part number
Series
A
8
B
L
M
N1)
L
BRE.00.200.NAS
BRE.0S.200.NAS
BRE.1S.200.NAS
BRE.2S.200.NAS
BRE.3S.200.NAS
BRE.4S.200.NAS
BRE.5S.200.NAS
BRE.6S.200.NAS
BRE.6E.200.NAS
00
7.ꢀ 8.8 3.ꢀ 60
9.ꢀ 10.ꢀ 4.ꢀ 8ꢀ
B
M
0S-0B
1S-1B
2S-2B
3S-3B
4S-4B
ꢀS-ꢀB
6S
10
14 11.0 12.ꢀ ꢀ.0 8ꢀ
18 12.0 14.0 6.0 8ꢀ
22 14.0 18.0 8.0 120
28 20.0 23.0 10.0 120
40 22.0 30.0 12.0 1ꢀ0
ꢀ4 22.0 30.0 12.0 1ꢀ0
ꢀ7 24.0 31.ꢀ 14.0 1ꢀ0
ø 3.5
6E
Note: 1) the tolerance on this dimension is ꢀ mm.
l Body material: Nickel-plated brass (Ni 3 µm)
These caps are suitable for use with any alignment key configuration. The
last letter «S» of the part number stands for the O-ring material (silicone
rubber). O-ring’s made from FPM are also available; if required, replace
the letter «S» by «V».
l Lanyard material: Stainless steel
l Crimp ferrule material: Nickel-plated brass + polyolefin
l O-ring material: Silicone rubber or FPM
l Operating temperature: -ꢀ0°/13ꢀ°C (Silicone rubber & Polyolefine)
lꢀ Watertightness: IP61 according to IEC 60ꢀ29 for S series
140
www.lemo.com
®
®
BRE Blanking caps for fixed sockets
L
B
Dimensions (mm)
Part number
Series
M
A
B
L
M
4
N1)
8ꢀ
BRE.0K.200.NAS
BRE.1K.200.NAS
BRE.2K.200.NAS
BRE.3K.200.NAS
BRE.4K.200.NAS
BRE.5K.200.NAS
0K-0E
1K-1E
2K-2E
3K-3E
4K-4E
ꢀK-ꢀE
1ꢀ.0 10 1ꢀ.0
17.0 12 20.0
20.ꢀ 14 24.0
24.0 14 28.0
6
8ꢀ
8
8ꢀ
8
120
30.0 20 30.ꢀ 10 120
44.0 22 37.0 12 1ꢀ0
Note: 1) the tolerance on this dimension is ꢀ mm.
l Body material: Nickel-plated brass (Ni 3 µm)
l Lanyard material: Stainless steel
These caps are suitable for use with any alignment key configuration. The
last letter «S» of the part number stands for the O-ring material (silicone
rubber). O-ring’s made from FPM are also available; if required, replace
the letter «S» by «V».
l Crimp ferrule material: Nickel-plated brass + polyolefin
l O-ring material: Silicone rubber or FPM
l Operating temperature: -ꢀ0°/13ꢀ°C (Silicone rubber & Polyolefine)
lꢀ Watertightness: IP68 according to IEC 60ꢀ29
BRA Blanking caps for fixed sockets
L
Dimensions (mm)
M
Part number
Series
A
L
M
N1)
BRA.3K.200.EAN
BRA.4K.200.EAN
3K
4K
26
31
27 14.ꢀ 120
31 17.0 120
l Material: black ALCRYN®
l Lanyard material: Stainless steel
l Crimp ferrule material: Stainless steel AISI 304 + polyolefin
N
Note: 1) the tolerance on this dimension is ꢀ mm.
These caps are suitable for use with any alignment key configuration.
BRF Blanking caps for free sockets
L
M
Dimensions (mm)
Part number
Series
3K
A
L
M
N1)
BRF.3K.200.EAN
26
27 14.ꢀ 1ꢀꢀ
l Material: black ALCRYN®
l Lanyard material: Stainless steel
l Crimp ferrule material: Stainless steel AISI 304 + polyolefin
N
Note: 1) the tolerance on this dimension is ꢀ mm.
These caps are suitable for use with any alignment key configuration.
www.lemo.com
141
®
®
BRD Blanking caps for free sockets
L
M
Dimensions (mm)
Part number
Series
A
B
L
M
N1)
8ꢀ
8ꢀ
8ꢀ
8ꢀ
9ꢀ
BRD.00.200.PCSG
BRD.0B.200.PCSG
BRD.1B.200.PCSG
BRD.2B.200.PCSG
BRD.3B.200.PCSG
00
7.ꢀ 9.8
9.0 3.ꢀ
0S-0B
1S-1B
2S-2B
3S-3B
10.0 12.ꢀ 11.0 4.8
14.0 17.0 13.ꢀ ꢀ.6
18.0 21.0 14.ꢀ 6.0
22.0 2ꢀ.ꢀ 17.0 7.0
N
Note: 1) the tolerance on this dimension is ꢀ mm.
On request this cap is available in black. If required, replace the last letter
«G» of the part number by «N».
l Body material: Polyoxymethylene (POM) grey (or black)
l Cord material: Polyamide 6, grey (or black)
l Gasket material: Silicone rubber
l Maximum operating temperature: 100°C
lꢀ Watertightness: IP61 according to IEC 60ꢀ29
Fitting the cord
Slide the socket into the loop of the cord.
Place the loop into the groove in front of the collet nut.
Tighten the loop.
BRF Blanking caps for free sockets
Dimensions (mm)
Part number
Series
L
A
8
B
L
M
N1)
B
M
BRF.00.200.NAS
BRF.0S.200.NAS
BRF.1S.200.NAS
BRF.2S.200.NAS
BRF.3S.200.NAS
BRF.4S.200.NAS
BRF.5S.200.NAS
BRF.6S.200.NAS
00
7.ꢀ 8.8 3.ꢀ 8ꢀ
9.ꢀ 10.ꢀ 4.ꢀ 8ꢀ
0S-0B
1S-1B
2S-2B
3S-3B
4S-4B
ꢀS-ꢀB
6S
10
14 11.0 12.ꢀ ꢀ.0 8ꢀ
18 12.0 14.0 6.0 8ꢀ
22 14.0 18.0 8.0 120
28 20.0 23.0 10.0 120
40 22.0 30.0 12.0 1ꢀ0
ꢀ4 22.0 30.0 12.0 1ꢀ0
sliding loop
Note: 1) the tolerance on this dimension is ꢀ mm.
l Body material: Nickel-plated brass (Ni 3 µm)
These caps are suitable for use with any alignment key configuration. The
last letter «S» of the part number stands for the O-ring material (silicone
rubber). O-ring’s made from FPM are also available; if required, replace
the letter «S» by «V».
l Lanyard material: Stainless steel
l Crimp ferrule material: Nickel-plated brass + polyolefin
l O-ring material: Silicone rubber or FPM
l Operating temperature: -ꢀ0°/13ꢀ°C (Silicone rubber & Polyolefine)
lꢀ Watertightness: IP61 according to IEC 60ꢀ29 for S series
142
www.lemo.com
®
®
BRF Blanking caps for free sockets
L
Dimensions (mm)
B
Part number
Series
A
B
L
M
4
N1)
8ꢀ
M
BRF.0K.200.NAS
BRF.1K.200.NAS
BRF.2K.200.NAS
BRF.3K.200.NAS
BRF.4K.200.NAS
BRF.5K.200.NAS
0K-0E
1K-1E
2K-2E
3K-3E
4K-4E
ꢀK-ꢀE
1ꢀ.0 10 1ꢀ.0
17.0 12 20.0
20.ꢀ 14 24.0
24.0 14 28.0
6
8ꢀ
8
8ꢀ
8
120
30.0 20 30.ꢀ 10 120
44.0 22 37.0 12 1ꢀ0
sliding loop
Note: 1) the tolerance on this dimension is ꢀ mm.
l Body material: Nickel-plated brass (Ni 3 µm)
l Lanyard material: Stainless steel
These caps are suitable for use with any alignment key configuration. The
last letter «S» of the part number stands for the O-ring material (silicone
rubber). O-ring’s made from FPM are also available; if required, replace
the letter «S» by «V».
l Crimp ferrule material: Nickel-plated brass + polyolefin
l O-ring material: Silicone rubber or FPM
l Operating temperature: -ꢀ0°/13ꢀ°C (Silicone rubber & Polyolefine)
lꢀ Watertightness: IP68 according to IEC 60ꢀ29
BRR Spring loaded dust caps for ERA, ERN and EGl sockets or PSA and PKl fixed sockets
Dimensions (mm)
Part number
Series
A
B
C
E
L
M
N
BRR.0S.200.PZVG
BRR.1S.200.PZVG
BRR.2S.200.PZVG
BRR.3S.200.PZVG
0S-0B
1S-1B
2S-2B
3S-3B
11.0 13.3 9.0 ꢀ.8 ꢀ.0 1.2 1ꢀ.3
14.2 17.1 12.0 6.0 6.3 1.ꢀ 20.3
18.6 22.4 1ꢀ.2 6.ꢀ 8.2 2.0 26.2
22.ꢀ 26.ꢀ 18.2 9.0 8.8 2.ꢀ 30.8
N
ø A
L
Note: On request, this cap is available in black, blue or white. If so
replace the last letter «G» of the part number by «N», «A» or «B».
l Body material: PSU
l Gasket material: FKM
M
l Spring material: Stainless steel
l Axes material: Nickel-plated brass
l Maximum operating temperature: 100°C
lꢀ Watertightness: IP61 according to IEC 60ꢀ29
E maxi
BRR Spring loaded dust cap for EDl and EBl fixed sockets
Dimensions (mm)
Part number
Series
3K
A
B
C
L
M
3
N
N
L
ø A
BRR.3K.200.PZSG
29 29 23 8.1
33.2
Note: Use Allen key (0.9 mm flat) to secure cap on connector.
l Cap material: Polyoxymethylene (POM) grey
l Body material: Nickel-plated brass
l Gasket material: Silicone rubber
l Spring material: Stainless steel
M
l Axes material: Nickel-plated brass
l Maximum operating temperature: 100°C
lꢀ Watertightness: IP61 according to IEC 60ꢀ29
www.lemo.com
143
®
®
BFG Blanking caps for plugs (T series)
BHG Blanking caps for fixed plugs (T series)
L
L
B
B
ø 3.5
sliding loop
Dimensions (mm)
N1)
7.0 4.3 9.0 60 BHG.TT.100.CAS
Part number
Part number
A
B
L
BFG.TT.100.CAS
BFG.0T.100.CAS
BFG.1T.100.CAS
BFG.2T.100.CAS
BFG.3T.100.CAS
l Body material: Chrome-plated brass (Ni 3 µm)
l Lanyard material: Stainless steel
9.5 5.0 11.0 85 BHG.0T.100.CAS
12.0 6.3 12.4 85 BHG.1T.100.CAS
15.0 6.4 13.8 85 BHG.2T.100.CAS
18.8 6.4 17.6 120 BHG.3T.100.CAS
l Crimp ferrule material: Nickel-plated brass + polyolefin
l O-ring material: Silicone
l Operating temperature: -50°/135°C (Silicone rubber & Polyolefine)
lꢀ Watertightness: IP68 according to IEC 60529
Note: 1) the tolerance on this dimension is 5 mm.
BRF Blanking caps for free sockets (T series)
BRE Blanking caps for sockets (T series)
B
B
L
L
M
M
ø 3.5
sliding loop
Dimensions (mm)
Part number
Part number
A
B
L
M
N1)
BRF.TT.200.CAZ
BRF.0T.200.CAZ
BRF.1T.200.CAZ
BRF.2T.200.CAZ
BRF.3T.200.CAZ
7.0 4.3 10.4 2.4
9.5 5.0 13.2 3.2
12.0 6.3 15.1 4.2
15.0 6.4 17.1 5.2
60 BRE.TT.200.CAZ
85 BRE.0T.200.CAZ
85 BRE.1T.200.CAZ
85 BRE.2T.200.CAZ
l Body material: Chrome-plated brass (Ni 3 µm)
l Lanyard material: Stainless steel
l Crimp ferrule material: Nickel-plated brass + polyolefin
l Operating temperature: -50°/135°C (Silicone rubber & Polyolefine)
lꢀ Watertightness: IP68 according to IEC 60529
18.8 6.4 21.2 6.4 120 BRE.3T.200.CAZ
Note: 1) the tolerance on this dimension is 5 mm.
144
www.lemo.com
®
®
GMl
Bend relief (TPU)
A bend relief made from thermoplastic polyurethane elas-
tomer can be fitted over LEMO plugs and sockets that are
supplied with nut for fitting such bend relief.
They are available in nine different colours match with the
GRA insulating washers (see page 149).
Use the part numbers shown below to order this accessory
separately.
L
Main characteristics
l Material: TPU (Thermoplastic Polyurethane)
l Temperature range in dry atmosphere: -40°C +80°C
Bend relief
Cable ø
Bend relief
Cable ø
Series
Series
Part number
Part number
A
L
min. max.
A
L
min. max.
GMA.00.012.DG 1)
GMA.00.018.DG 1)
GMB.00.025.DG 1)
GMB.00.028.DG 1)
GMB.00.032.DG 1)
GMD.00.025.DG 1)
GMD.00.028.DG 1)
GMD.00.032.DG 1)
1.2
1.8
2.5
2.8
3.2
2.5
2.8
3.2
22
22
22
22
22
22
22
22
1.1
1.8
2.5
2.8
3.2
2.5
2.8
3.2
1.4
2.1
2.8
3.1
3.5
2.8
3.1
3.5
GMA.2B.040.DG
GMA.2B.045.DG
GMA.2B.050.DG
GMA.2B.060.DG
GMA.2B.070.DG
GMA.2B.080.DG 1)
GMA.3B.050.DG 1)
GMA.3B.060.DG
GMA.3B.070.DG
GMA.3B.080.DG
GMA.3B.090.DG
GMA.4B.080.DG 1)
GMA.4B.010.DG 1)
GMA.4B.011.DG 1)
GMA.4B.012.DG 1)
GMA.4B.013.DG 1)
4.0
4.5
5.0
6.0
7.0
7.8
36
36
36
36
36
36
4.0
4.5
5.0
6.0
7.0
7.8
4.5
5.0
5.5
6.5
7.7
8.8
2B
2S
00-TT
2E-2K-2T
4.5
6.0
7.0
8.0
9.0
42
42
42
42
42
4.5
6.0
7.0
8.0
9.0
5.2
6.9
3S
3B
GMA.0B.025.DG
GMA.0B.030.DG
GMA.0B.035.DG
GMA.0B.040.DG 1)
GMA.0B.045.DG 1)
2.5
3.0
3.5
4.0
4.5
24
24
24
24
24
2.5
3.0
3.5
4.0
4.5
2.9
3.4
3.9
4.4
5.2
7.9
3E-3K-3T
4S
8.9
0B
0S
10.0
0E-0K-0T
8.0
10.0
11.0
12.0
13.5
60
60
60
60
60
8.0
10.0
11.0
12.0
13.5
9.0
10.9
11.9
13.0
14.5
4S
4B
GMA.1B.025.DG
GMA.1B.030.DG
GMA.1B.035.DG
GMA.1B.040.DG
GMA.1B.045.DG
GMA.1B.054.DG
GMA.1B.065.DG 1)
2.5
3.0
3.5
4.0
4.5
5.4
6.5
30
30
30
30
30
30
30
2.5
3.0
3.5
4.0
4.5
5.4
6.5
2.9
3.4
3.9
4.4
4.9
6.0
7.0
4E-4K
5E-5K
1B-XB
1S
Note: all dimensions are in millimetres.
1E-1K-1T
Note: 1) Design may differ from other bend relief, model without stripes. The «GMD» are thin bend reliefs (for very flexible cables).
The last letter «G» of the part number indicates the grey colour of the bend relief. For ordering a bend relief with another colour, see table on page 146
and replace the letter «G» by the letter of the required colour. See also detailed information for each series: B series on page 71; K series on page 71;
T series on page 71; S series on page 121; E series on page 121.
www.lemo.com
145
®
®
GMA Bend relief (Silicone)
A bend relief has been designed for connectors used in
applications at high temperature or requiring vapour ster-
ilization.
These bend reliefs are different from previous ones as for
their material, a silicone elastomer which is noted for its
retention of flexibility over a wide temperature range. They
are available in nine colours.
Use the part numbers shown below to order this accessory
separately.
L
Main characteristics
l Material: Silicone elastomer VMQ
l Temperature range in dry atmosphere: -60°C +200°C
l Temperature range in water steam: +140°C
Bend relief
Cable ø
Bend relief
Cable ø
Series
Series
Part number
Part number
A
L
min. max.
A
L
min. max.
GMA.0B.018.RG
GMA.0B.025.RG
GMA.0B.030.RG
GMA.0B.035.RG
GMA.0B.040.RG
GMA.0B.045.RG
1.7
2.5
3.0
3.5
4.0
4.5
27
27
27
27
27
27
1.7
2.5
3.0
3.5
4.0
4.5
2.4
2.9
3.4
3.9
4.4
5.2
GMA.2B.040.RG
GMA.2B.045.RG
GMA.2B.051.RG
GMA.2B.057.RG
GMA.2B.063.RG
GMA.2B.071.RG
GMA.2B.080.RG
4.0
4.5
5.1
5.7
6.3
7.1
8.0
41
41
41
41
41
41
41
4.0
4.5
5.1
5.7
6.3
7.1
8.0
4.4
5.0
5.6
6.2
7.0
7.9
9.0
0B
0S
2B
2S
0E-0K-0T
2E-2K-2T
GMA.1B.025.RG
GMA.1B.030.RG
GMA.1B.035.RG
GMA.1B.040.RG
GMA.1B.045.RG
GMA.1B.051.RG
GMA.1B.057.RG
GMA.1B.063.RG
2.5
3.0
3.5
4.0
4.5
5.1
5.7
6.3
34
34
34
34
34
34
34
34
2.5
3.0
3.5
4.0
4.5
5.1
5.7
6.3
2.9
3.4
3.9
4.4
5.0
5.6
6.2
7.0
1B
1S
1E-1K-1T
Note: The last letter «G» of the part number indicates the grey colour of the bend relief. For ordering a bend relief with another colour, see table on page
146 and replace the letter «G» by the letter of the required colour. See also detailed information for each series: B series on page 71; K series on page
71; T series on page 71; S series on page 121; E series on page 121.
Note: the selection of pigments, which should remain
stable at high temperature, is limited by the new regu-
lations. For this reason, some colours will be a shade
different from those used for Desmopan bend reliefs. The
selected solutions represent the best possible compromise.
Ref.
Colour
blue
Ref.
Colour
yellow
Ref.
Colour
red
A
B
G
J
M
N
R
S
V
white
grey
brown
black
orange
green
146
www.lemo.com
®
®
GMl
Overall bend relief for plugs and sockets
Overall bend reliefs, type GMF for plugs and GMP for sockets offer optimum protection against mechanical damage and
give a protection index of IP65 according to IEC 60529 (mated position). These bend reliefs slide easily over the connector
shell and are positioned by slightly pressing the bend relief backnut.
The special design of the bend relief for plug provides for easy use of the push-pull self-latching system.
GMF Bend relief for straight plug
Bend relief
Cable ø
Series
Part number
A
L
min. max.
L
GMF.0B.035.060EN
GMF.1B.062.072EN
GMF.2B.082.095EN
11.0
16.0
22.0
60.5
72.0
95.0
1.0
2.5
5.0
3.5
6.2
8.2
0S-0B
1S-1B
2S-2B
l Material: Elastomer rubber black colour
l Operating temperature: -30°C to +120°C
GMP Bend relief for free socket
Bend relief
Cable ø
min. max.
Series
Part number
A
L
L
GMP.0B.035.069EN
GMP.1B.062.079EN
GMP.2B.082.102EN
11.0
16.0
69.0
80.0
1.0
2.5
5.0
3.5
6.2
8.2
0S-0B
1S-1B
2S-2B
21.0 102.5
l Material: Elastomer rubber black colour
l Operating temperature: -30°C to +120°C
– The overall bend relief shall be installed over plug or free socket fitted with a nut for bend relief.
– The typical applications are shown below.
– The overall bend relief can be cut at different length depending on cable diameter.
Plug-free socket
PCA
FFA
S series
PHG
FGG
FFA
B series
S series
Plug-fixed socket
Optimum protection is offered only when using
ERA
EGG
front panel mounting fixed sockets
FGG
B series
www.lemo.com
147
®
®
GMF Bend relief with cap for plug
admissible ø (mm)
For
Cut
Series
4E
Part number
models
min.
max.
–
A
B
C
D
E
8.0
9.0
8.9
9.9
131
35
FFA
10.0
11.5
13.0
15.0
11.4
12.9
14.9
16.5
GMF.4K.080.EANZ
4K
FGG
A B C D E
160
l Material: Black EPDM
GMP Bend relief with cap for free socket
admissible ø (mm)
For
Cut
Series
4E
Part number
models
min.
max.
–
A
B
C
D
E
8.0
9.0
8.9
9.9
156
17
PCA
PHG
10.0
11.5
13.0
15.0
11.4
12.9
14.9
16.5
GMP.4K.080.EANZ
4K
A B C D E
160
l Material: Black EPDM
GSC Lead-through with cable collet
Dimensions (mm)
Part number
A
B
e
E
L
M
S1 S2 S3
~L
S 3
M
GSC.00.290.CDll
6.5 8.1 M5x0.5 1.5 16 4.0
5
6
9
7
GSC.1S.290.NDll 12.0 12.5 M9x0.6 5.0 26 7.5 11
GSC.3S.290.NDll 17.0 19.5 M15x1.0 8.1 30 12.0
11
–
14 17
Note: ll = collet cable diameter of the B series. For cable diameter refer
to page 67. Other surface treatment available.
S 1
S 2
E maxi
The cable collet system stands for both screened and unscreened cables.
It can be delivered with a nut for fitting a bend relief it you add a «Z» at
the end of the part number.
148
www.lemo.com
®
®
GCA Earthing washer
Dimensions (mm)
Part number
Series
00-TT
A
B
L
N
GCA.00.255.LT
GCA.0S.255.LT
GCA.0E.255.LT
GCA.1S.255.LT
GCA.1E.255.LT
GCA.2S.255.LT
GCA.2E.255.LT
GCA.3S.255.LT
GCA.3E.255.LT
GCA.4S.255.LT
GCA.4E.255.LT
GCA.5S.255.LT
9.5 7.1 0.4 18.2
0S-0B-0T 13.0 9.1 0.4 22.0
0E-0K 17.0 14.1 0.5 27.5
1S-1B-1T 17.0 12.2 0.5 27.5
1E-1K 20.0 16.2 0.5 32.0
2S-2B-2T 20.0 15.2 0.5 32.0
2E-2K 25.0 20.2 0.5 39.0
3S-3B-3T 25.0 18.2 0.5 39.0
ø A
ø B
L
3E-3K
4S-4B
4E-4K
5S-5B
31.0 24.0 0.5 43.0
35.0 25.6 0.6 50.0
35.0 30.6 0.6 50.0
42.0 35.1 0.3 57.5
l Material: CuSnZn plated brass (2 µm)
GRA Insulating washers
Sockets or plugs mounted on panels can be fitted with insulating washers. The nine colours available combined with those
for the bend reliefs makes colour coding possible.
Dimensions (mm)
Part number
Series
A
B
E
L
M
S
T
GRA.00.269.GG
GRA.0S.269.GG
GRA.1S.269.GG
GRA.2S.269.GG
GRA.3S.269.GG
GRA.4S.269.GG
00
10.0 8.8 4.5 1.8 1.0 6.4 8.0
12.0 10.8 6.0 1.8 1.0 8.3 9.9
16.0 13.8 6.5 1.8 1.0 10.6 12.2
21.1 17.9 7.3 2.3 1.3 13.6 16.2
25.0 21.8 10.3 2.2 1.2 16.7 20.2
31.9 28.7 10.5 2.5 1.5 23.6 27.1
0S-0B
1S-1B
2S-2B
3S-3B
4S-4B
Note: insulating washers for series 5B are available on request.
Caution: these insulating washers can be used with fixed and free sockets
with across flat dimension S1 equivalent to the S dimension of the washer.
l Material: Polyamide
l Maximum operating temperature: 90° C
L
ø A
S
M
Ref.
Colour
blue
Ref.
Colour
yellow
Ref.
Colour
red
A
B
G
J
M
N
R
S
V
white
grey
brown
black
orange
green
E maxi
T
Note: the last letter «G» of the part number indicates the colour grey for
the insulating washer. To obtain an insulating washer of another colour,
refer to the table above and change the letter «G» of the part number to
the corresponding letter of the colour required. For the panel cut-out,
please consult chapter «Panel cut-out» on page 158.
www.lemo.com
149
®
®
GRC Double panel washers
Double panel washers have been designed to make the drilling of panel holes easier for mounting fixed and free sockets.
The combination of the nine different colours of the double panel washers and of the bend reliefs makes colour coding
possible.
Dimensions (mm)
Part number
Series
B
E
H
L
M
N
R
S
GRC.0S.260.HG
GRC.1B.260.HG
0S-0B
1S-1B
10.9
13.9
5
5
14 2.5 1.5 26.5 12.5 8.3
20 3.3 1.8 34.5 14.5 10.6
Caution: these double panel washers can be used with fixed or free sock-
ets with across flat dimension S1 equivalent to the S dimension of the
washer.
l Material: Polyamide
l Maximum operating temperature: 90° C
Ref.
Colour
blue
Ref.
Colour
yellow
Ref.
Colour
red
L
R
S
M
A
B
G
J
M
N
R
S
V
white
grey
brown
black
orange
green
Note: the last letter «G» of the washer’s part number indicates the colour
grey. For other colours, refer to the above table and replace letter «G»
by the one corresponding to the colour required. For the panel cut-out,
please consult chapter «Panel cut-out» on page 158.
E maxi
150
www.lemo.com
®
®
Tooling
DCG Spanners for hexagonal nuts
N
Dimensions (mm)
Part number
of the nut
Part number
B
L
N
DCG.91.149.0TN 14
DCG.91.161.1TN 16
DCG.91.201.4TN 20
DCG.91.231.7TN 23
DCG.91.282.2TN 28
40
45
52
62
76
50 GEA.00.240.LN
52 GEA.0S.240.LN
65 GEA.1S.240.LN
68 GEA.2S.240.LN
73 GEA.3S.240.LN
ø B
l Material: blackened steel
DCA Spanners for hexagonal nuts with locator for flats on socket thread
N
Dimensions (mm)
Part number
of the nut
Part number
B
L
N
DCA.91.149.0TN
DCA.91.161.1TN
DCA.91.201.4TN
DCA.91.231.7TN
14
16
20
65
73
85
50 GEA.00.240.LN
52 GEA.0S.240.LN
65 GEA.1S.240.LN
23 100 68 GEA.2S.240.LN
28 120 73 GEA.3S.240.LN
DCA.91.282.2TN
ø B
l Material: blackened steel
DCB Spanners for round nuts
N
Dimensions (mm)
Part number
Part number
of the nut
B
L
N
DCB.91.119.0TN
DCB.91.131.1TN
DCB.91.161.4TN
DCB.91.201.8TN
DCB.91.242.2TN
11
13
16
20
24
40
45
52
62
76
50 GEB.00.240.LN
50 GEB.0S.240.LN
65 GEB.1S.240.LN
65 GEB.2S.240.LN
70 GEB.3S.240.LN
ø B
l Material: blackened steel
www.lemo.com
151
®
®
DCH Spanners for conical nuts
ø A
ø B
Dimensions (mm)
Part number
of the nut
Part number
A
B
L
N
DCH.91.101.PN 10.1 12.8 124 48.3 GEC.00.240.LC
DCH.91.121.PN 12.1 14.8 124 49.3 GEC.0S.240.LC
DCH.91.161.PN 16.1 21.0 124 51.9 GEC.1S.240.LC
DCH.91.201.PN 20.1 22.8 129 53.5 GEC.2S.240.LC
N
l Material: dark grey polyurethane
DCH Spanners for notched nuts
Dimensions (mm)
Part number
ø A
Part number
of the nut
ø B
A
B
L
N
DCH.91.101.PA 10.1 12.8 124 48.3 GEG.00.240.LC
DCH.91.121.PA 12.1 14.8 124 49.3 GEG.0S.240.LC
DCH.91.181.PA 18.1 22.8 129 53.1 GEG.0E.240.LC
DCH.91.161.PA 16.1 21.0 124 51.2 GEG.1S.240.LC
DCH.91.201.PA 20.1 22.8 129 53.5 GEG.1E.240.LC
DCH.91.141.PA 14.1 18.6 124 51.2 GEG.1S.242.LC
DCH.91.201.PA 20.1 22.8 129 53.5 GEG.2S.240.LC
DCH.91.241.PA 24.1 30.8 134 52.6 GEG.2S.241.LC
DCH.91.251.PA 25.1 32.8 134 55.5 GEG.2E.240.LC
N
l Material: blue polyurethane
DCP Flat spanners for collet nut
M
N
Dimensions (mm)
Part number
L
M
N
S1
DCP.99.040.TC
DCP.99.045.TC
DCP.99.050.TC
DCP.99.055.TC
DCP.99.060.TC
70 0.95 10.5 4.0
70 2.00 10.5 4.5
78 2.00 12.6 5.0
78 2.00 12.6 5.5
78 2.00 12.6 6.0
l Material: chrome-plated steel
www.lemo.com
152
®
®
DCP Set of flat spanners for collet nuts
Dimensions (mm)
N
Part number
Series
S1
L
M
N
S1
S2
S2
M
0B-0K
1B-1K
95
95
2.5
2.5
21
8.1
7.1
9.1
DCP.91.001.TN
DCP.91.023.TN
DCP.91.045.TN
25 10.1
2B-2K 115 3.0
3B-3K 115 3.0
30 13.1 12.1
35 15.1 14.1
44 21.1 20.1
54 31.1 30.1
4B
5B
130 3.0
130 3.0
l Material: blackened steel
DCP Set of flat spanners for collet nuts
N
S1
S2
M
Dimensions (mm)
S1
21 7.55 7.05
Part number
Series
L
M
N
S2
0T
1T
2T
3T
95
95
2.5
2.5
DCP.0T.110.TN
DCP.2T.110.TN
25 11.05 9.05
30 14.05 12.05
35 16.05 14.05
115 3.0
115 3.0
l Material: blackened steel
DCP Set of flat spanners for FSl retaining ring & collet nuts
M
N
Dimensions (mm)
Part number
Series
L
M
N
DCP.91.FSG.TN
00-0B-1B-2B 152
3B 153
2
2
24
32
DCP.91.FSG.TN3B
l Material: blackened steel
DCP Set of flat spanners for FSl retaining ring & collet nuts
M
N
Dimensions (mm)
Part number
Series
L
M
2
N
DCP.TT.FSG.TN TT-0T-1T-2T 152
l Material: blackened steel
25
www.lemo.com
153
®
®
DCL Spanners for assembling plugs with 2 latches
ø B
N
Dimensions (mm)
Part number
Series
B
L
N
DCL.91.105.0TK
DCL.91.127.0TK
DCL.91.149.0TK
00
0S
1S
10
12
14
45 13.5
47 17.0
52 19.0
l Material: blackened steel
DCN Spanners for assembling plugs with 3 latches
ø B
N
Dimensions (mm)
Part number
Series
B
L
N
DCN.91.905.0TK
DCN.91.125.0TK
DCN.91.149.0TK
DCN.91.201.5TK
00
0S
1S
3S
9
42
47
53
74
12
17
19
22
12
14
20
l Material: blackened steel
154
www.lemo.com
®
®
DCL Assembly tool for FVB.00.303.NLA plugs
Dim. (mm)
Part number
Series
00
L
A
5
L
DCL.91.516.5TK
165
DPF
Pliers for assembling plugs (series K and E)
Dim. (mm)
Part number
Series
ø A
A
B
0E-0K
1E-1K
2E-2K
3E-3K
10
–
–
12
–
DPF.91.001.TA
DPF.91.023.TA
ø B
15
–
220
18
Example for use
The plug end must be held in the pliers whilst the nut is
tightened with the flat spanner.
Spanner
Pliers DPF
DTA
Taps
Part number
Series
Thread
DTA.99.700.5Z
DTA.99.900.6Z
00
M7 x 0.5
M9 x 0.6
0S-0B
www.lemo.com
155
®
®
156
www.lemo.com
®
®
Panel cut-outs
P1-P3-P4-P9
P2-P5-P10-P11
P6-P7
P8
L mini
ø C
L mini
+ 0.1
0
B
120° x 3
+ 0.1
0
B
+0.1
0
ø A
+ 0.1
0
+0.1
0
ø A
B
B and T series
P1
P2
ø A
P3
P4
B
–
P5
P6
B
P8
B
P9
P10
ø A
–
Series
1)
ø A
2)
B
L
L
ø A
–
B
–
L
–
ø A
–
L
–
ø A
–
L
–
ø A
H
–
ø A
–
C
–
ø A
7.1
B
–
L
12
L
–
00-TT
0B-0T
7.1 6.4 12.5 7.1 11.5
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
9.1 8.3 14.5 9.1 13.5 14.1 12.6 20.1 10.1 9.1 15.0 8.30 10.5
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
9.1 8.3 15
–
–
1B-1T 12.1 10.6 18.5
XB
14.1 12.6 21.5
–
–
–
–
–
–
–
–
–
–
–
–
16.1 14.6 22.0 14.1 12.6 21.0 11.17 14.0
12.1 10.6 19 11.1 17
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2B-2T 15.1 13.6 22.5
3B-3T 18.2 16.6 27.0
19.2 17.1 28.0 16.1 15.1 23.0 13.95 18.0
15.1 13.6 23
18.2 16.6 27
25.2 23.6 36
–
–
–
–
–
–
–
–
–
20.2 18.6 29.5
25.2 23.6 36.1
35.2 33.6 47.1
–
–
–
–
–
–
4B
25.2 23.6 36.0
35.2 33.6 44.0
5B
3.3 35.2 34 2.8 35.2 47 35.2 33.6 47
Note: 1) when using the tapered washer (GBB) a round hole apply 00-TT: ø 7.6 mm / 0B-0T: ø 9.6 mm / 1B-1T: ø 12.6 mm / 2B-2T: ø 15.7 mm /
3B-3T: ø 18.8 mm / 4B: ø 26 mm / 5B: ø 36 mm (tolerance: 0/+0.02). 2) tolerance: 0/+0.02
Cut-out types
Model Type
Model Type
Model Type
Model Type
Model Type
l l
ECG
EEG
EGG
EFG
EHG
EJG
P1
P1
P1
P2
P1
P5
EKG
ENG
ENY
ESG
EXG
EYG
P1
P1
FAG
FWG
HCG
HEG
HGG
HHG
P1
P9
P3
P9
P9
P9
HMG
HNG
PEG
PFG
PKG
P9
P9
P1
P1
P1
P4
S
P4/P93)
P2
XBG
XPF
XRB
YHG
P1
P2
P1/P2
P2/P10
P1/P10
P2
P9
Note: 3) in series 1B use P9.
l l
R
Mounting nut torque
Torque (Nm)
Metal shell Plastic shell
Series
4)
00-TT
0B-0T
1B-1T
XB
1.0
0.4
0.4
0.7
–
2.5
4.5
5.0
2B-2T
3B-3T
4B
6.0
0.8
1.0
5.0
–
9.0
12.0
17.0
5B
Note: 4) these values apply when metal shell are mounted with insulating washer.
www.lemo.com
157
®
®
S series
P1
B
P2
ø A
P3
B
–
P4
B
–
P5
ø A2)
–
P6
B
–
P7
B
–
P10
ø A
–
–
P11
ø A
–
Series
ø A1)
L
L
ø A
–
L
–
ø A
–
L
–
L
–
ø A
–
H
–
ø A
–
H
–
L
–
L
–
00
0S
1S
2S
3S
4S
5S
6S
7.1 6.4 12.5 7.1 11.5
9.1 8.3 14.5 9.1 13.5 12.1 10.6 20.0 10.1 9.1 15
–
–
–
–
–
–
–
–
–
9.1 16
12.1 10.6 18.5 12.1 19.0 14.1 12.6 21.0 12.1 10.6 18 11.92 15.5 3.3 12.1 12.7 2.7 11.1 12.4
11.1 17 12.1 19
15.1 13.6 22.5 15.1 21.5 16.1 14.6 22.0 16.1 15.1 23
18.2 16.6 27.0 18.2 27.0 20.2 18.6 30.0 20.2 18.6 29
25.2 23.6 36.0 25.2 34.0 25.2 23.6 36.0 25.2 23.6 36
35.2 33.6 44.0 35.2 44.0 35.2 33.6 47.0 35.2 33.6 47
48.3 45.6 58.0 48.3 58.0 48.3 45.6 60.0 48.3 45.6 60
–
–
–
–
–
–
–
–
–
–
3.3 15.1 15.5
3.3 18.2 18.0
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
4.4 35.2 36.8
–
–
–
Note: 1) when using the tapered washer (GBB) a round hole apply 00: ø 7.6 mm / 0S: ø 9.6 mm / 1S: ø 12.6 mm / 2S: ø 15.7 mm / 3S: ø 18.8 mm /
4S: ø 26 mm / 5S: ø 36 mm (tolerance: 0/+0.02). 2) tolerance: 0/+0.02
Cut-out types
Model Type
Model Type
Model Type
Model Type
EBC
EBD
EBS
ECP
EEP
EHP
P6
P6
ERA
ERC
ERD
ERN
ERS
EXP
P1
P1
EWB
FAA
P3
P1/P23)
P34)
P3
PSP
PSS
RAD
SWH
P1
P1
P1/P25)
P7
P1
HCP
HGP
HGW
PSA
P1
P1
P4
P1
P2
P11
P2/P1
P2/P10
P1
Note: 3) in series 6S use P2. 4) use only ø A in 1S series. 5) in series 4S and 5S use P2.
Mounting nut torque
Torque (Nm)
Metal shell Plastic shell
Series
6)
0S
1S
2S
3S
4S
5S
6S
2.5
0.4
0.7
0.8
1.0
5.0
–
4.5
6.0
9.0
12.0
17.0
22.0
–
Note: 6) these values apply when metal shell are mounted with insulating washer. 1 N = 0.102 kg
Panel cut-out for mounting with insulating washer
(S-B series)
Panel cut-out for mounting with double panel washer
(S-B series)
GRA
GRC
øA
Dim. (mm)
ø A
8.9 8.1
Series
B
00
0S-0B 10.9 10.0
1S-1B 13.9 12.3
2S-2B 18.0 16.3
3S-3B 21.9 20.3
4S-4B 29.1 27.4
Dimensions (mm)
Series
+ 0.1
0
B
ø A
11
H
L
0S-0B
1S-1B
14 13.5
L mini
14
20 17.0
Note: for nut tightening torques please refer to the corresponding series in the table on page 157.
www.lemo.com
158
®
®
P1
P6-P7
L mini
+0.1
0
B
+ 0.1
0
ø A
+ 0.1
0
B
K series
Mounting nut torque
P1
B
P6
P7
B
–
–
–
Torque
Series
Series
(Nm)
ø A
L
ø A
–
B
–
H
ø A
H
–
0K
1K
2K
3K
4K
5K
14.1 12.6 20.5
16.1 14.6 22.5
20.2 18.6 29.0
–
–
–
–
–
–
0K
1K
2K
3K
4K
5K
5
7
–
–
–
–
–
–
9
24.2 22.6 35.5 3.5 22.6 20.6 3.5 23.1 23.0
30.2 28.6 43.0 3.5 28.6 27.0 3.5 30.1 29.0
45.2 42.6 57.0 4.5 42.6 38.0 4.5 45.1 44.0
12
17
22
1 N = 0.102 kg
Cut-out types
Model Type
Model Type
Model Type
EBG
EDG
EEG
EGG
EHG
P7
P72)
P1
ENG
EVG
FAG
FXG
HEG
P1
P1
P1
P6
P1
HGG
PBG
PEG
PKG
P1
P73)
P1
P1
P1
l l
P1
S
P1
Note: 2) for this model dimension B = 18.1. 3) for this model dimension B = 19.1.
E series
Mounting nut torque
P1
B
P6
Torque
Series
Series
(Nm)
ø A
L
ø A
–
B
–
H
–
0E
1E
2E
3E
4E
5E
6E
14.1 12.6 20.5
0E
1E
2E
3E
4E
5E
6E
5
7
16.1 14.6 22.5
–
–
–
20.2 18.6 29.0 2.9 15.1 11.8x20.4
9
24.2 22.6 35.5
30.2 28.6 43.0
45.2 42.6 57.0
55.3 52.1 68.0
–
–
–
–
–
–
–
–
–
–
–
–
12
17
22
27
1 N = 0.102 kg
Cut-out types E series
Model Type
Model Type
EBR
EEP
EHP
ERA
ERB
ERC
P6
P1
P1
P1
P1
P1
FAA
HGP
PSA
PSP
SWH
P1
P1
P1
P1
P1
www.lemo.com
159
®
®
PCB drilling pattern
Fixed socket with straight print contact (B-K-T series)
P15
Dimensions
302
Series
A
B
00-TT
0.6
1.2
ø A
0B-0K-0T
1B-1K-1T
2B-2K-2T
0.8
0.8
0.8
2.2
2.8
4.4
1
2
A
A
Dimensions
B
Dimensions
B
303
304
Series
Series
A
C
A
C
00-TT
0.6
1.35
2.30
3.00
4.60
5.60
120°
00-TT
0.6
1.6
2.5
3.1
5.0
6.2
45°
1
2
4
3
1
0B-0K-0T
1B-1K-1T
2B-2K-2T
3B-3K-3T
0.8
0.8
0.8
0.8
120°
120°
120°
120°
0B-0K-0T
1B-1K-1T
2B-2K-2T
3B-3K-3T
0.6
0.8
0.8
0.8
45°
45°
45°
45°
3
2
ꢀ B
ꢀ B
Dimensions
B
Dimensions
B
305
306
307
308
305
306
308
309
Series
Series
A
C
A
C
00-TT
0.5
1.7
72°
0B-0K-0T
1B-1K-1T
2B-2K-2T
3B-3K-3T
0.6
2.8
3.4
5.2
6.7
72°
1
5
4
2
1
0.8
0.8
0.8
72°
72°
72°
2
3
3
5
4
Dimensions
B
Dimensions
B
Series
Series
A
C
A
C
0B-0K-0T
1B-1K-1T
0.6
3.0
3.7
60°
2B-2K-2T
3B-3K-3T
0.8
5.6
7.1
72°
1
5
1
6
6
2
2
4
5
4
0.8
60°
0.8
72°
3
3
Dimensions
B
Dimensions
B
Series
Series
A
C
A
C
0B-0K-0T
1B-1K-1T
2B-2K-2T
3B-3K-3T
0.6
3.00
3.70
5.80
7.08
60°
1B-1K-1T ꢀ 0.8ꢀ
3.8ꢀ
51°26’
6
1
1
0.8
0.8
0.8
60°
60°
60°
7
7
2
5
8
2
3
6
3
4
4
5
Dimensions
B
Dimensions
B
Series
Series
A
A
C
C
2B-2K-2T
3B-3K-3T
0.8
6.4
7.5
45°
0B-0K-0T
3B-3K-3T
0.6
0.8
3.2
7.5
45°
1
1
8
6
2
4
0.8
45°
45°
2
4
8
9
3
7
3
7
6
5
5
Note: contact numbering is for female contact version only.
160
www.lemo.com
®
®
Dimensions
Dimensions
310
312
314
316
319
322
324
312
312
316
318
320
322
Series
Series
A
B
C
D
H
A
B
C
D
H
D°
D°
1B-1K-1T ꢀ 0.6ꢀ 3.95ꢀ 45°ꢀ 22°30’ꢀ1.40
2B-2K-2T ꢀ 0.8ꢀ 6.30ꢀ 45°ꢀ 22°30’ꢀ2.15
3B-3K-3T ꢀ 0.8ꢀ 7.90ꢀ 45°ꢀ 22°30’ꢀ2.80
0B-0T
0.5 3.3 40° 20° 1.25
1
8
2
7
6
9
3
10
4
5
ø A
120°
Dimensions
Series
Dimensions
Series
A
B
C
D
H
A
B
C
D
H
XB
ꢀ 0.8ꢀ 5.40ꢀ 45°ꢀ 22°30’ꢀ2.40
2B-2K-2T ꢀ 0.8ꢀ 6.50ꢀ 45°ꢀ 22°30’ꢀ2.80
3B-3K-3T ꢀ 0.8ꢀ 8.20ꢀ 45°ꢀ 22°30’ꢀ3.40
D°
D°
Dimensions
Dimensions
Series
Series
A
B
C
H
A
B
D
H
1B-1K-1T 0.6 4.4 90° 1.90
2B-2K-2T 0.8 6.5 90° 2.65
3B-3K-3T 0.8 8.2 90° 3.40
1B-1K-1T ꢀ 0.6ꢀ
4.4ꢀ 32°44’ꢀ 2.00
Dimensions
Series
Dimensions
Series
A
A
B
D
E
H
B
C
D
E
H
E°
E°
2B-2K-2T ꢀ0.8ꢀ 6.6ꢀ32°44’ꢀ16°22’ꢀ3.10
3B-3K-3T ꢀ0.8ꢀ 8.4ꢀ32°44’ꢀ16°22’ꢀ3.86
4B-4K ꢀ0.6ꢀ 10.5ꢀ32°44’ꢀ16°22’ꢀ5.00
2B-2K-2T 0.8 6.7 60° 30° 15° 3.50
3B-3K-3T 0.8 8.4 60° 30° 15° 4.34
Dimensions
Series
Dimensions
Series
A
B
C
D
E
H
A
B
C
D
H
D°
E°
2B-2K-2T 0.8 6.7 60° 30° 15° 3.5
3B-3K-3T ꢀ0.6ꢀ 8.62ꢀ51°26’ꢀ27°42’ꢀ4.78
4B-4K ꢀ0.6ꢀ11.00ꢀ51°26’ꢀ27°42’ꢀ6.00
Dimensions
Series
Dimensions
Series
A
B
D
E
H
A
B
C
D
E
H
C°
E°
XB
ꢀ0.6ꢀ 5.7ꢀ 25°42’ꢀ12°51’ꢀ 3.1
3B-3K-3T ꢀ0.6ꢀ 8.8ꢀ 45°ꢀ25°43’ꢀ22°30’ꢀ 5
ø A
ø A
Dimensions
2B-2K-2T.326
3B-3K-3T.326
Series
A
B
C
D
E
H
3B-3K-3T ꢀ0.6ꢀ 8.8ꢀ45°ꢀ25°43’ꢀ1.8ꢀ5.30
4B-4K ꢀ0.6ꢀ11.1ꢀ45°ꢀ25°43’ꢀ2.2ꢀ6.65
25°43'
25°43'
ø E
ø 0.6
ø 0.6
Note: contact numbering is for female contact version only.
www.lemo.com
161
®
®
3B-3K-3T.330
4B-4K.330
2B-2K-2T.332
3B-3K.332
32°44’
36°
11°15'
36°
36°
11°15'
2.6
21°11’
21°11'
ø 7.2
2.6
4B-4K.340
4B-4K.348
5B-5K.350
5B-5K.354
ø 0.6
22°30'
17°8'34''
ø 0.6
5B-5K.364
ø 0.6
27°41'32''
Note: all views are from the side of the socket.
162
www.lemo.com
®
®
Length of straight print contacts
Length of straight print contacts
(for socket EZG/EYG/XPF)
(for socket Ell)
Models
Dimensions
Type
Type
EZG/EYG
ø C
0.7
XPF
ø C
ø C
0.5
L
L
L
–
302/303
4.5
4.5
3.0
–
0.7
–
00
302/303/304
3.0
0B
TT
304/305
0.5
0.5
3.0
–
306/307/309
302/303
0.7
0.5
0.4
3.2
3.2
3.0
0B
0K
304/305/306/307/309
302/303/304/305/306/307/308
0.7
0.5
3.8
3.8
–
–
–
–
0T
1B
312
310/314/316
1B
302/303/304/305/306/307/308
302/303/304/305/306/307/308
0.7
0.5
3.0
4.0
0.7
5.5
–
–
2B
310/312/314/316/318/319
1K
1T
310/314/316
Ell
EZG/EYG/XPF
312
0.7
0.5
3.0
3.0
XB
322
2B
302/303/304/305/306/307
0.7
0.5
3.0
3.0
308/310/312/314/316/318/319
2K
L
2T
L
326/332
3B
303/304/305/306/307/308/309
0.7
0.5
3.0
5.0
310/312/314/316/318
3K
3T
320/322/324/326/330/332
4B
316/320/324/330/340/348
0.5
5.0
4K
348
0.7
0.5
5.0
5.0
5B
5K
350/354/364
Note: This table does not apply for socket Hll; socket EHl and plugs FAl/FWl.
P16
Fixed socket for printed circuit (B series)
Holes for fixing the housing
Dimensions
Dimensions
EYG-EZG
XPF.0B
Series
Series
A
B
A
B
B
ø A
B
ø A
00
0B
1B
2B
0.81)
5.08
0B
1.7
5.08
1.72)
1.72)
1.72)
7.62
7.62
10.16
Note: Mounting torque for screws: 0.1 Nm. 1) to solder. 2) to screw.
www.lemo.com
163
®
®
P17
Fixed socket with elbow print contact (B-K-T series)
Dim.
A
302
Series
ø A
00-TT
0.6
0.7
0.9
0.9
1
2
0B-0K-0T
1B-1K-1T
2B-2K-2T
A
A
2.54
Dimensions
Dimensions
303
304
Series
Series
A
L
A
L
ø A
ø A
00-TT
0.6
1.27
00-TT
0.6
2.54
3
2
4
1
3
2
0B-0K-0T
1B-1K-1T
2B-2K-2T
0.7
0.9
0.9
1.27
1.27
2.54
0B-0K-0T
1B-1K-1T
2B-2K-2T
3B-3K-3T
0.7
0.7
0.9
0.9
2.54
2.54
3.50
2.54
1
2.54
2.54
0B-0K-0T.305
1B-1K-1T / 3B-3K-3T.305
2B-2K-2T.305
0B-0K-0T / 1B-1K-1T.306
ø 0.7
5
2
4
5
5
5
2
4
3
4
6
1
4
3
1
1
1
3
2
3
2
2.54 2.54
2.54 2.54
2.54 2.54
2.54 2.54
2B-2K-2T / 3B-3K-3T.306
0B-0K-0T / 1B-1K-1T.307
2B-2K-2T.307
1B-1K-1T.308
4
5
7
6
5
5
6
1
4
3
5
6
1
4
6
2
3
7
2
1
2
8
3
7
2
1
4
3
2.54 2.54
2.54 2.54
2.54 2.54
2.54 2.54
2B-2K-2T / 3B-3K-3T.308
0B-0K-0T.309
1B-1K-1T / 2B-2K-2T /
3B-3K-3T.310
2B-2K-2T / 3B-3K-3T.312
7
6
ø 0.6
8
7
3
6
7
6
8
1
12
9
11
10
3
5
4
8
1
5
4
8
1
2
7
9
3
6
5
4
1
2
5
4
9
2
10
3
2
2.54 2.54
2.54 2.54
2.54 2.54 2.54
2.54 2.54 2.54
1B-1K-1T / 2B-2K-2T /
3B-3K-3T.314
2B-2K-2T / 3B-3K-3T.316
2B-2K-2T.318
3B-3K-3T.318
10
18
9
8
10
9
9
8
11
12
1
8
7
6
5
10
12
2
11
13
2
8
7
6
5
9
7
17
16
15
4
12
1
18
14
3
17
15
4
7
6
11
1
16
13
3
15
14
4
10
1
14
6
5
16
5
11
2
13
4
13
14
3
12
3
2
1.27
2.54 2.54 2.54 2.54
2.54 2.54 2.54 2.54
2.54
5.08
2.54
Note: contact numbering is for female contact version only.
164
www.lemo.com
®
®
P17
Fixed socket with elbow print contact (B-K-T series)
2B-2K-2T.319
3B-3K-3T.320
3B-3K-3T.324
2B-2K-2T.326
ø 0.6
11
21
23
24
17
4
11
21
26
25
17
4
11
20
10
19
12
22
15
10
20
19
12
22
24
16
3
10
20
19
18
5
13
14
1
9
8
7
6
12
14
15
3
9
8
7
6
10
9
13
9
8
7
6
13
1
11
13
2
8
12
1
18
14
3
17
15
4
7
6
14
1
23
15
2
18
17
5
19
16
5
16
3
18
5
2
16
4
2
1.27
2.54 2.54 2.54 2.54
2.54 2.54 2.54 2.54 2.54
2.54 2.54 2.54 2.54
3B-3K-3T.326
3B-3K-3T.330
2B-2K-2T.332
3B-3K.332
ø 0.7
ø 0.6
ø 0.7
ø 0.7
13
26
32
30
21
5
11
13
25
32
29
20
5
12
24
31
30
21
6
15
28
14
27
29
20
4
12
25
31
22
6
12
10
14
26
28
19
4
14
13
25
27
19
4
12
24
29
20
5
11
16
17
1
11
24
23
7
13
21
26
25
17
4
9
8
7
6
16
17
1
15
27
18
3
11
15
16
1
10
9
10
9
22
24
16
3
20
19
18
5
10
9
26
23
22
21
6
14
1
23
15
2
23
22
7
30
28
18
19
3
17
18
3
8
8
8
2
2
2
7
2.54 2.54 2.54 2.54 2.54 2.54
2.54 2.54 2.54 2.54 2.54 2.54
2.54 2.54 2.54 2.54 2.54
2.54 2.54 2.54 2.54 2.54 2.54
Note: contact numbering is for female contact version only.
P18 P19 P20
Elbow socket (90°) for printed circuit (B series)
P18 -EPG.00.302 - XBG.00.302
P18 -EPG.00.3032) - XBG.00.3032)
XRB.00.3021)
XRB.00.3031)
ø 0.8
5.08
5.08
ø 0.8
ø 0.6
A
A
1.9
1.27
1.9
ø 0.6
1.27
P18 -EPG.00.304 - XBG.00.304
P18 -EPG.00.305
P19 - EPG-EXG (0B/1B.302)
Solder mount
P19 - EPG-EXG (0B/1B.302)
Screw mount
XRB.00.3041)
ø 0.8
7.62
ø 1.7
7.62
5.08
ø 0.8
ø 0.6
5.08
ø 0.8
ø 0.6
1.9
1.27
ø 0.8
2.54
ø 0.8
2.54
1.27
2.54
Note: 1) for the XRB.00 series the holes for shell fixing are different (see p. 35).
2) the dimensions for the EPG.00.303.HLN and XBG.00.303.HLN models are given on page 26. For other models please contact factory.
www.lemo.com
165
®
®
P18 P19 P20
Elbow socket (90°) for printed circuit (B series)
P19 - EPG-EXG (0B/1B.303)
Solder mount
P19 - EPG-EXG (0B/1B.303)
Screw mount
P19 - EPG-EXG (0B/1B.304)
Solder mount
P19 - EPG-EXG (0B/1B.304)
Screw mount
ø 1.7
ø 1.7
7.62
ø 0.8
7.62
ø 0.8
7.62
7.62
ø 0.8
2.54
ø 0.8
2.54
ø 0.8
2.54
ø 0.8
2.54
P19 - EPG-EXG (0B/1B.305)
Solder mount
P19 - EPG-EXG (0B/1B.305)
Screw mount
P19 - EPG-EXG (0B/1B.306)
Solder mount
P19 - EPG-EXG (0B/1B.306)
Screw mount
ø 1.7
7.62
ø 0.8
7.62
ø 1.7
7.62
ø 0.8
7.62
ø 0.8
2.54
ø 0.8
2.54
ø 0.8
2.54
ø 0.8
2.54
P19 - EPG-EXG (0B/1B.307)
Solder mount
P19 - EPG-EXG (0B/1B.307)
Screw mount
P19 - EPG-EXG (1B.308)
Solder mount
P19 - EPG-EXG (1B.308)
Screw mount
ø 0.8
7.62
ø 1.7
7.62
ø 0.8
7.62
ø 1.7
7.62
ø 0.8
1.27
ø 0.8
1.27
ø 0.8
1.27
ø 0.8
1.27
2.54
2.54
P19 - EPG-EXG (0B.309)
Solder mount
P19 - EPG-EXG (0B.309)
Screw mount
P19 - EPG-EXG (1B.310)
Solder mount
P19 - EPG-EXG (1B.310)
Screw mount
ø 0.8
7.62
ø 1.7
7.62
ø 0.8
7.62
ø 1.7
7.62
ø 0.8
1.27
ø 0.8
1.27
ø 0.8
1.27
ø 0.8
1.27
P20 - EPG.1B.314
Solder mount
P20 - EPG.1B.314
Screw mount
ø 0.8
12.7
ø 1.7
12.7
ø 0.7
ø 0.7
2.54
2.54
1.27
1.27
P21
Fixed socket with straight print contact (S-E series)
Dimensions
Dimensions
302
303
Series
Series
A
B
A
B
C
ø A
0S-0E
1S-1E
2S-2E
0.8
2.2
0S-0E
1S-1E
2S-2E
0.6
2.8
45°
0.8
0.8
3.0
4.5
0.8
0.8
3.5
5.5
45°
60°
ø B
166
www.lemo.com
®
®
P21
Fixed socket with straight print contact (S-E series)
Dimensions
B
Dimensions
304
305
Series
Series
A
C
A
B
C
D
0S-0E
1S-1E
2S-2E
0.6
2.8
3.5
5.0
45°
1S-1E
2S-2E
0.8
3.5
60°
45°
0.8
0.8
45°
45°
0.8
5.5
60°
60°
ø B
Dimensions
B
Dimensions
306
307
D°
Series
Series
A
C
C
D
E
F
1S-1E
2S-2E
3S-3E
0.8
3.5
5.5
6.5
60°
2S-2E ꢀ 45°ꢀ 22°30’ꢀ 2.75ꢀ 3.25
3S-3E ꢀ 45°ꢀ 22°30’ꢀ 3.25ꢀ 3.90
0.8
0.8
60°
60°
Dimensions
Series
Dimensions
308
310
D°
Series
D°
A
B
C
D
A
B
C
D
E
2S-2E
3S-3E
ꢀ
ꢀ
0.8ꢀ
6.5ꢀ
45°ꢀ 22°30’
45°ꢀ 22°30’
2S-2E ꢀ 0.8ꢀ 6.5ꢀ 45°ꢀ 22°30’ꢀ1.25
3S-3E ꢀ 0.8ꢀ 7.8ꢀ 45°ꢀ 22°30’ꢀ1.50
0.8ꢀ
7.8ꢀ
ø A
3S-3E.312
3S-3E.313
3S-3E.314
3S-3E.316
6 x 1.2
6 x 1.2
8 x 1
6 x 1.2
3S-3E.318
8 x 1
Note: all views are from the side of the socket.
Length of straight print contacts (for socket Ell)
L
Dimensions
Dimensions
Type
Type
ø C
L
ø C
L
302
0.7
3.0
0S
0E
2S
2E
303/304/305/306/307/308/310
0.7
3.0
303/304
0.5
3.0
302
0.7/1.5 3.0/5.0
305/306/307/308/310
312/313/314/316/318
1S
1E
3S
3E
0.7
3.0
303/304/305
305/306
0.7
0.5
3.0
3.0
Note: This table does not apply for HGP and EHP sockets and for FAA plugs.
www.lemo.com
167
®
®
P22 P23
Elbow socket (90°) for printed circuit (S series)
P22 - EPL - EXP
P22 - EPL - EXP
P23 - EPL.00.113
P23 - EPL.0S.116
Solder mount
Screw mount
5.08
5.08
ø 1.7
ø 0.8
7.62
7.62
ø 1.1
ø 0.8
2.54
2.54
2.54
2.54
2.54
2.54
Note: all dimensions are in millimetres.
P24
Fixed socket with elbow print contact (S-E series)
Dim.
A
0.7
302
304
306
Series
ø A
0S-0E
1S-1E
1
2
0.9
A
A
2.54
Dimensions
B
0.7 2.00 1.00
Dimensions
A
0.7
303
305
Series
Series
A
C
ø A
B
2.0
ø A
0S-0E
1S-1E
0S-0E
1S-1E
2S-2E
1
2
4
3
1
3
0.7 2.48 1.24
0.7
0.9
3.5
3.5
2
2.54
2.54
Dim.
A
0.7
Dim.
A
0.7
Series
Series
1
3
5
4
1
2
3
6
5
4
1S-1E
2S-2E
1S-1E
2S-2E
2
0.9
0.9
2.54 2.54
2.54
2S-2E.307
2S-2E.308
2S-2E / 3S-3E.310
3S-3E.312
1
4
8
5
1
9
4
8
3
4
5
6
7
1
7
6
5
1
2
11
12
2
3
7
6
2
3
7
2
8
10
5
6
3
9
4
10
2.54 2.54
2.54 2.54 2.54
2.54 2.54 2.54
2.54 2.54 2.54
3S-3E.314
3S-3E.316
5
6
9
4
5
6
7
8
1
2
3
4
13
14
15
16
1
2
3
12
13
14
10
9
10
11
7
8
11
12
2.54 2.54 2.54
2.54 2.54 2.54
168
www.lemo.com
®
®
Cable assembly (B, K, T, S and E series)
Cable stripping lengths (B series)
straight plugs and sockets with cable collet, clamping type D or M (solder or crimp contacts)
elbow plugs (90°) with cable collet, clamping type D or M (solder or crimp contacts)
Cable stripping lengths (mm)
M1
M3
M1
M3
Type
Solder
S
Crimp
S
Solder
S
Crimp
S
L
T
L
T
L
T
L
T
302/303/304
305/306
0.5
7.0
4
4
2.5 10.0
2.5
4
–
3.0
9.5
4
4
2.5 12.5
2.5
4
–
3.0
00
0.35 7.0
–
–
9.5
–
–
302/303
304/305
0.9 14.5
0.7 14.5
0.5 14.0
0.35 14.0
7
7
7
7
3.5 17.0
3.5 17.0
2.5 18.0
7
7
7
–
4.0 19.5
4.0 19.5
3.0 19.0
7
7
7
7
3.5 22.0
3.5 22.0
2.5 23.0
7
7
7
–
4.0
4.0
3.0
–
1)
0B
306/307/3092)
312
2.5
–
–
19.0
2.5
–
302/303
304/305
1.3 14.5
0.9 14.5
0.7 14.5
0.5 16.5
8
8
8
8
3.5 18.0
3.0 18.0
3.0 18.0
8
8
8
–
4.0 25.5
4.0 25.5
4.0 25.5
8
8
8
8
3.5 28.0
3.0 28.0
3.0 28.0
8
8
8
–
4.0
4.0
4.0
–
1)
1B
306/307/308
310/314/316
L
2.5
–
–
27.5
2.5
–
T
312
322
0.7 16.5 7.5 3.5
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
XB
2B
0.5 17.5
8
4.0
302
303
2.0 19.0
1.6 19.0
1.3 18.0
0.9 17.0
0.7 17.0
0.5 17.0
9
9
9
9
9
9
4.0 22.0
3.5 22.0
3.5 20.0
3.0 20.0
3.0 20.0
9
9
9
9
9
–
5.5 30.0
5.5 30.0
4.0 29.0
4.0 28.0
4.0 28.0
9
9
9
9
9
9
4.0 33.0
3.5 33.0
3.5 31.0
3.0 31.0
3.0 31.0
9
9
9
9
9
–
5.5
5.5
4.0
4.0
4.0
–
S
304/305/306/307
308/310
312/314/316/318/319
326/332
2.5
–
–
28.0
2.5
–
302
3.0 24.0 10
2.0 23.0 10
1.6 23.0 10
1.3 22.0 10
4.5 28.0 10
4.0 27.0 10
3.5 27.0 10
3.5 25.0 10
5.5 35.0 10
5.5 34.0 10
5.5 34.0 10
4.0 33.0 10
4.5 39.0 10
4.0 38.0 10
3.5 38.0 10
3.5 36.0 10
5.5
5.5
5.5
4.0
3B
303/304
305/306/307
308/310
1.3
3.5
4.0
3.5
4.0
5.5
309
22.0 10
2.0
25.0 10
4.0
33.0 10
5.5
36.0 10
4.0
312/314/316/318
0.9 21.0 10
3.0 25.0 10
3.0 25.0 10
4.0 32.0 10
4.0 32.0 10
3.0 36.0 10
3.0 36.0 10
4.0
4.0
320/322/324/326/330/332 0.7 21.0 10
Note: 1) In 0B and 1B series, «L» and «S» dimensions shall be increased by 2 mm for the largest collet (D56 in 0B series; D76 in 1B series).
The tolerances on these dimensions are: L: 0.5 mm; S: 0.5 mm; T: 0.2 mm.
www.lemo.com
169
®
®
Cable stripping lengths (B series)
straight plugs and sockets with cable collet, clamping type D or M (solder or crimp contacts)
elbow plugs (90°) with cable collet, clamping type D or M (solder or crimp contacts)
Cable stripping lengths (mm)
M1
M3
M1
M3
Type
Solder
S
Crimp
S
Solder
S
Crimp
S
L
T
L
T
L
T
L
T
304
306/307
310
3.0 33.0 12
2.0 32.0 12
1.6 32.0 12
1.3 32.0 12
0.9 32.0 12
0.7 32.0 12
4.5 36.0 12
4.0 36.0 12
3.5 36.0 12
3.5 36.0 12
3.0 34.0 12
3.0 34.0 12
5.5 41.0 12
5.5 41.0 12
5.5 39.0 12
4.0 39.0 12
4.0 39.0 12
4.0 39.0 12
4.5 45.0 12
4.0 45.0 12
3.5 43.0 12
3.5 43.0 12
3.0 43.0 12
3.0 43.0 12
5.5
4B
5.5
5.5
4.0
4.0
4.0
L
312
T
316/320/324/330
340/348
302
304
6.0 42.0 18
4.0 47.0 18
3.0 47.0 18
2.0 46.0 18
1.6 46.0 18
1.3 45.0 18
0.9 45.0 18
7.5
–
–
–
70.0 18
7.5
–
–
–
1)
S
5B
5.5 50.0 18
4.5 50.0 18
4.0 49.0 18
3.5 49.0 18
3.5 48.0 18
3.0 48.0 18
7.0 75.0 18
7.0 75.0 18
5.5 74.0 18
5.5 74.0 18
4.0 74.0 18
4.0 74.0 18
5.5 78.0 18
4.5 78.0 18
4.0 77.0 18
3.5 77.0 18
3.5 77.0 18
3.0 77.0 18
7.0
7.0
5.5
5.5
4.0
4.0
310
314/316
320
330/340/348
350/354/364
Note: 1) In 5B series, «L» and «S» dimensions shall be increased by 13 mm for the largest collet (D25).
elbow plugs (90°) with cable collet, clamping type D or M (solder or crimp contacts) (FSG model)
M5
Cable stripping lengths (mm)
M5
Type
Solder
S
Crimp
S
L
T
L
T
302/303/304
305/306
0.5 12.0
4
4
2.5 15.0
2.5
5
–
3.0
00
0.35 12.0
–
–
302/303
304/305
306/307/3091)
0.9 21.5
0.7 21.5
0.5 21.0
0.35 21.0
7
7
7
7
3.5 24.0
3.5 24.0
3.5 24.0
7
7
7
–
4.0
4.0
3.0
–
0B
1B
2B
L
T
312
3.5
–
302/303
304/305
306/3072)/308
310/314/3163)
1.3 27.0
0.9 27.0
0.7 27.0
0.5 29.0
8
8
8
8
3.5 32.0
3.5 32.0
3.5 32.0
8
8
8
–
4.0
4.0
4.0
–
S
3.5
–
302
303
2.0 35.0
1.6 35.0
1.3 34.0
0.9 33.0
0.7 33.0
0.5 33.0
9
9
9
9
9
9
4.0 38.0
4.0 38.0
4.0 36.0
4.0 36.0
3.5 36.0
9
9
9
9
9
–
5.5
5.5
4.0
4.0
4.0
–
304/305/306/307
308/310
312/314/316/318/319
326/332
3.5
–
1)
2)
3)
Note: center wire L = 16.5. center wire L = 20.5. 5 center wires L = 20.5.
The tolerances on these dimensions are: L: 0.5 mmꢀ S: 0.5 mmꢀ T: 0.2 mm.
170
www.lemo.com
®
®
Cable stripping lengths (B series)
straight plug, short version, clamping type D or M (solder or crimp contacts)
M4
Cable stripping lengths (mm)
L
M4
Type
Solder
S
Crimp
S
T
L
T
L
T
302/303
304/305
306/307/3092)
0.9
0.7
9.5
8
8
8
3.0 13.0
3.0 13.0
2.5 13.5
8
8
8
4.0
0B
9.5
4.0
3.0
S
0.5 10.0
straight plug, long version, clamping type D or M (solder or crimp contacts)
M2
Cable stripping lengths (mm)
M2
Type
Solder
S
Crimp
S
L
T
L
T
302/303
304/305
1.3 39.5
8
8
8
8
3.5 43.0
3.0 43.0
3.0 43.0
8
8
8
–
4.0
1)
1B
0.9 39.5
0.7 39.5
0.5 42.0
4.0
4.0
–
L
T
306/307/308
310/314/316
2.5
–
302
303
2.0 49.0
1.6 49.0
1.3 48.0
0.9 47.0
0.7 47.0
0.5 47.0
9
9
9
9
9
9
4.0 53.0
3.5 53.0
3.5 50.0
3.0 49.0
3.0 49.0
9
9
9
9
9
–
5.5
5.5
4.0
4.0
4.0
–
2B
S
304/305/306/307
308/310
312/314/316/318/319
326/332
2.5
–
Note: 1) In 1B series, «L» and «S» dimensions shall be increased by 2 mm for the largest collet (D76 in 1B series).
2) Crimp contacts are available only for connectors fitted with male contacts.
The tolerances on these dimensions are: L: 0.5 mmꢀ S: 0.5 mmꢀ T: 0.2 mm.
www.lemo.com
171
®
®
Cable stripping lengths (K series)
straight plugs and sockets with cable collet, clamping type C (solder or crimp contacts)
elbow plug (90°) with cable collet, clamping type C (solder or crimp contacts)
Cable stripping lengths (mm)
M1
M3
M1
M3
Type
Solder
Crimp
Solder
Crimp
L
Sꢀ
T
L
Sꢀ
T
L
Sꢀ
T
L
Sꢀ
T
302/303
304/305
0.9
0.7
0.5
9.5
6
6
6
6
3.5 12.0
3.5 12.0
2.5 13.0
6
6
6
–
4.0 22.5
4.0 22.5
4.0 22.0
6
6
6
6
3.5 25.0
3.5 25.0
2.5 26.0
6
6
6
–
4.0
0K
9.5
9.0
4.0
4.0
–
306/307/3091)
312
0.35 9.0
2.5
–
–
22.0
2.5
–
302/303
304/305
1.3 11.0
0.9 11.0
0.7 11.0
0.5 13.0
7
7
7
7
3.5 14.5
3.0 14.5
3.0 14.5
2.5 14.0
7
7
7
7
4.0 27.5
4.0 27.5
4.0 27.5
3.0 29.5
7
7
7
7
3.5 31.0
3.0 31.0
3.0 31.0
7
7
7
–
4.0
4.0
4.0
–
1K
2K
306/307/308
310/314/316
2.5
–
302
303
2.0 16.5
1.6 16.5
1.3 15.5
0.9 14.5
0.7 14.5
0.5 14.5
8
8
8
8
8
8
4.0 19.5
3.5 19.5
3.5 17.5
3.0 17.5
3.0 17.5
8
8
8
8
8
–
5.5 36.0
5.5 36.0
4.0 35.0
4.0 34.0
4.0 34.0
8
8
8
8
8
8
4.0 39.0
3.5 39.0
3.5 37.0
3.0 37.0
3.0 37.0
8
8
8
8
8
–
5.5
5.5
4.0
4.0
4.0
–
304/305/306/307
308/310
312/314/316/318/319
326/332
2.5
–
–
34.0
2.5
–
L
302
3.0 19.0 10
2.0 18.0 10
1.6 18.0 10
1.3 17.0 10
4.5 23.0 10
4.0 22.0 10
3.5 22.0 10
3.5 20.0 10
5.5 48.0 10
5.5 48.0 10
5.5 48.0 10
4.0 47.0 10
4.5 53.0 10
4.0 52.0 10
3.5 52.0 10
3.5 50.0 10
5.5
5.5
5.5
4.0
T
3K
303/304
305/306/307
308/310
S
1.3
3.5
4.0
3.5
4.0
5.5
309
17.0 10
2.0
20.0 10
4.0
47.0 10
5.5
50.0 10
4.0
312/314/316/318
0.9 16.0 10
0.7 16.0 10
3.0 22.0 11
2.0 21.0 11
1.6 21.0 11
1.3 21.0 11
0.9 21.0 11
0.7 21.0 11
3.0 20.0 10
3.0 20.0 10
4.5 25.0 11
4.0 25.0 11
3.5 25.0 11
3.5 25.0 11
3.0 23.0 11
3.0 23.0 11
4.0 46.0 10
4.0 46.0 10
5.5 52.0 11
5.5 51.0 11
5.5 51.0 11
4.0 51.0 11
4.0 51.0 11
4.0 51.0 11
3.0 50.0 10
3.0 50.0 10
4.5 55.0 11
4.0 55.0 11
3.5 55.0 11
3.5 55.0 11
3.0 53.0 11
3.0 53.0 11
4.0
4.0
5.5
5.5
5.5
4.0
4.0
4.0
320/322/324/326/330
304
306/307
310
4K
5K
312
316/320/324/330
340/348
302
304
6.0 24.0 14
4.0 29.0 14
3.0 29.0 14
2.0 28.0 14
1.6 28.0 14
1.3 27.0 14
0.9 27.0 14
7.5
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
5.5 32.0 14
4.5 32.0 14
4.0 31.0 14
3.5 31.0 14
3.5 30.0 14
3.0 30.0 14
7.0
7.0
5.5
5.5
4.0
4.0
310
314/316
320
330/340/348
350/354/364
Note: 1) crimp contacts are available only for connectors fitted with male contacts. The tolerances on these dim. are: L: ± 0.5 mm; S: ± 0.5 mm; T: ± 0.2 mm.
172
www.lemo.com
®
®
Cable stripping lengths (K series)
straight plug and socket with oversize cable collet, clamping type K (solder or crimp contacts)
M2
Cable stripping lengths (mm)
M2
Type
Solder
S
Crimp
S
L
T
L
T
302/303
304/305
1.3 23.5
8
8
8
8
3.5 27.5
3.0 27.5
3.0 27.5
8
8
8
–
4.0
1K
0.9 23.5
0.7 23.5
0.5 24.5
4.0
4.0
–
306/307/308
310/314/316
2.5
–
302
303
2.0 29.5 10
1.6 29.5 10
1.3 28.5 10
0.9 27.5 10
0.7 27.5 10
0.5 27.5 10
4.0 32.5 10
3.5 32.5 10
3.5 30.5 10
3.0 30.5 10
3.0 30.5 10
5.5
5.5
4.0
4.0
4.0
–
2K
3K
304/305/306/307
308/310
L
312/314/316/318/319
326/332
T
2.5
–
–
302
3.0 37.0 11
2.0 36.0 11
1.6 36.0 11
1.3 35.0 11
4.5 41.0 11
4.0 40.0 11
3.5 40.0 11
3.5 38.0 11
5.5
5.5
5.5
4.0
303/304
S
305/306/307
308/310
1.3
3.5
4.0
5.5
309
35.0 11
2.0
38.0 11
4.0
312/314/316/318
0.9 34.0 11
0.7 34.0 11
3.0 45.0 14
2.0 44.0 14
1.6 44.0 14
1.3 44.0 14
0.9 44.0 14
0.7 44.0 14
3.0 38.0 11
3.0 38.0 11
4.5 48.0 14
4.0 48.0 14
3.5 48.0 14
3.5 48.0 14
3.0 46.0 14
3.0 46.0 14
4.0
4.0
5.5
5.5
5.5
4.0
4.0
4.0
320/322/324/326/330
304
306/307
310
4K
312
316/320/324/330
340/348
Note: the tolerances on these dim. are: L: 0.5 mm; S: 0.5 mm; T: 0.2 mm.
www.lemo.com
173
®
®
Cable stripping lengths (T series)
straight plugs and sockets with cable collet, clamping type C (solder or crimp contacts)
M1
Cable stripping lengths (mm)
M1
Type
Solder
Crimp
L
Sꢀ
T
L
Sꢀ
T
302/303/304
305/306
0.5
7.0
4
4
6
6
6
6
2.5 10.0
2.5
4
–
6
6
6
–
3.0
TT
0.35 7.0
–
–
302/303
0.9
0.7
0.5
9.5
9.5
9.0
3.5 12.0
3.5 12.0
2.5 13.0
4.0
4.0
3.0
–
0T
1T
2T
304/305
306/307/3091)
312
0.35 9.0
2.5
–
302/303
304/305
1.3 11.0
0.9 11.0
0.7 11.0
0.5 13.0
7
7
7
7
3.5 14.5
3.0 14.5
3.0 14.5
2.5 14.0
7
7
7
7
4.0
4.0
4.0
3.0
L
306/307/308
310/314/316
T
302
303
2.0 16.5
1.6 16.5
1.3 15.5
0.9 14.5
0.7 14.5
0.5 14.5
8
8
8
8
8
8
4.0 19.5
3.5 19.5
3.5 17.5
3.0 17.5
3.0 17.5
8
8
8
8
8
–
5.5
5.5
4.0
4.0
4.0
–
S
304/305/306/307
308/310
312/314/316/318/319
326/332
2.5
–
302
3.0 19.0 10
2.0 18.0 10
1.6 18.0 10
1.3 17.0 10
4.5 23.0 10
4.0 22.0 10
3.5 22.0 10
3.5 20.0 10
5.5
5.5
5.5
4.0
3T
303/304
305/306/307
308/310
1.3
3.5
4.0
5.5
309
17.0 10
2.0
20.0 10
4.0
312/314/316/318
0.9 16.0 10
0.7 16.0 10
3.0 20.0 10
3.0 20.0 10
4.0
4.0
320/322/324/326/330
Note: 1) crimp contacts are available only for connectors fitted with male contacts. The tolerances on these dim. are: L: ± 0.5 mm; S: ± 0.5 mm; T: ± 0.2 mm.
174
www.lemo.com
®
®
Cable stripping lengths for unipole connectors (S series)
straight plugs and sockets with cable collet, clamping type C (solder contacts)
elbow plugs (90°) with cable collet, clamping type C (solder contacts)
straight plugs and sockets with cable crimping type E (crimp contacts)
elbow plugs (90°) with cable crimping type E (crimp contacts)
Cable stripping lengths (mm)
M1
M3
M5
M6
M1
Solder
S
M5
Crimp
S
M3
Solder
S
M6
Crimp
S
Type
L
9
T
4
L
T
7
L
7
T
2
L
T
7
113
116
1.3
1.6
4
19
5
4
17
5
00
11
5
4
–
–
–
8
5
2
–
–
–
0S
1S
2S
3S
4S
5S
L
120
130
2.0
3.0
13
13
8
8
5
5
–
–
–
–
–
–
13
13
8
8
2
2
–
–
–
–
–
–
T
130
140
3.0
4.0
18
18
9
9
6
6
–
–
–
–
–
–
15
15
9
9
2
2
–
–
–
–
–
–
S
140
160
4.0
6.0
21
21
9
9
7
9
–
–
–
–
–
–
19
19
9
9
2
2
–
–
–
–
–
–
140
160
4.0
6.0
25
25
9
9
7
9
–
–
–
–
–
–
23
23
9
9
2
2
–
–
–
–
–
–
112
12.0 12
15
12
–
–
–
–
–
–
–
–
–
straight plugs and sockets with oversize cable collet, clamping type K (solder contacts)
M2
Cable stripping
lengths (mm)
Type
M2
Solder
S
L
T
4
113
116
1.3
1.6
16
4
00
L
19
5
4
T
0S
1S
2S
3S
4S
120
130
2.0
3.0
25
25
8
8
5
5
S
130
140
3.0
4.0
34
34
9
9
6
6
140
160
4.0
6.0
39
39
9
9
7
9
140
160
4.0
6.0
50
50
9
9
7
9
www.lemo.com
175
®
®
Cable stripping lengths for multipole connectors (S series)
straight plugs and sockets with cable collet, clamping type C (solder or crimp contacts)
elbow plugs (90°) with cable collet, clamping type C (solder or crimp contacts)
Cable stripping lengths (mm)
M1
M3
M1
M3
Type
Solder
S
Crimp
S
Solder
S
Crimp
S
L
T
L
T
L
T
L
T
302
0.9 10.0
5
5
3.5
15
5
5
4.0 10.0
4.0 10.0
5
5
3.5 15
3.5 15
5
5
4.0
0S
303/304
0.7 10.0
3.5
15
4.0
302
1.3 12.5
0.9 12.0
8
8
3.5
3.0
17
17
8
8
4.0 14.5
4.0 14.0
8
8
3.5 17
3.0 17
8
8
4.0
4.0
1S
2S
3S
4S
303/304
0.9
305
12.0
0.7
8
3.0
17
8
4.0 14.0
8
3.0 17
8
4.0
306
302
0.7 12.5
1.6 17.0
1.3 17.5
8
9
9
3.0
3.5
3.5
17
22
22
8
9
9
4.0 14.5
5.5 17.0
4.0 17.5
8
9
9
3.0 17
3.5 22
3.5 22
8
9
9
4.0
5.5
4.0
303/304/305/306
L
1.3
3.5
3.0
3.5
T
307
17.5
0.9
9
22
9
4.0 17.5
4.0 17.0
9
22
9
4.0
3.0
308/310
0.9 17.0
2.0 20.0
9
9
3.0
4.0
22
–
9
–
9
–
3.0 22
9
–
4.0
–
302/303/304
–
–
–
–
–
–
–
–
S
2.0
4.0
3.5
305
20.0
1.3
9
–
–
–
–
–
306/307/308/310
312/313/314/316/318
302
1.3 20.5
0.9 20.0
9
9
3.5
3.0
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
4.0 25.0
3.0 23.5
9
9
7.0
4.5
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
303/304
3.0
4.5
4.0
305
306
307
23.5
2.0
9
9
9
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2.0 21.0
4.0
2.0
4.0
3.5
21.0
1.3
308/309/310/312/313/314 1.3 24.5
9
9
3.5
3.5
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
0.9 24.5
316/318/320/322/324
176
www.lemo.com
®
®
Cable stripping lengths for multipole connectors (S series)
straight plugs and sockets with cable collet, clamping type C (solder contacts)
elbow plugs (90°) with cable collet, clamping type C (solder contacts)
Cable stripping lengths (mm)
M1
M3
M1
Solder
S
M3
Solder
S
Type
L
T
L
T
302
303
304
305
6.0 33.5 22
7.5 33.5 22
7.5
5S
6.0
7.5
7.5
5.5
33.5 22
4.0
33.5 22
5.5
4.0 33.5 22
5.5 33.5 22
5.5
5.5
4.5
4.0
5.5
33.5 22
3.0
33.5 22
4.5
306/308
3.0 33.5 22
2.0 32.0 22
4.5 33.5 22
4.0 32.0 22
4.5
4.0
L
310/312/316
T
3.0
4.5
4.5
4.0
33.5 22
2.0
33.5 22
4.0
314
3.0
4.5
4.5
3.5
318/322
33.5 22
1.6
33.5 22
3.5
S
320/324
330/336/340/344/348
304
1.6 34.0 22
1.3 34.5 22
3.5 34.0 22
3.5 34.5 22
3.5
3.5
8.0 37.0 15 10.0 37.0 15 10.0
6S
312/318
4.0 37.0 15
3.0 37.0 15
2.0 37.0 15
1.6 37.0 15
1.3 37.0 15
0.9 37.0 15
7.0 37.0 15
6.0 37.0 15
7.0 37.0 15
4.5 37.0 15
4.0 37.0 15
4.0 37.0 15
7.0
6.0
7.0
4.5
4.0
4.0
320/324
330/336/348
360
364/372
106
straight plug with cable collet, clamping type D or M (solder or crimp contacts)
M4
Cable stripping lengths (mm)
M4
Type
L
Solder
S
Crimp
S
L
T
L
T
T
302
1.6 47.0
9
9
3.5
52
9
9
5.5
2S
303/304/305/306
1.3 47.5
3.5
52
52
52
4.0
4.0
4.0
1.3
3.5
3.0
S
307
47.5
0.9
9
9
9
9
308/310
0.7 47.0
3.0
www.lemo.com
177
®
®
Cable stripping lengths for multipole connectors (S series)
straight plugs and sockets with oversize cable collet, clamping type K (solder or crimp contacts)
M2
Cable stripping lengths (mm)
M2
Type
Solder
S
Crimp
S
L
T
L
T
302
0.9 19.5
5
3.5
23
5
4.0
0S
303/304
0.7 20.0
5
3.5
23
5
4.0
302
1.3 24.5
0.9 24.0
8
8
3.5
3.0
28
28
8
8
4.0
4.0
1S
2S
3S
4S
303/304
0.9
305
24.0
0.7
8
3.0
28
8
4.0
306
302
0.7 24.5
1.6 33.0
1.3 33.5
8
9
9
3.0
3.5
3.5
28
38
38
8
9
9
4.0
5.5
4.0
303/304/305/306
1.3
3.5
3.0
307
33.5
0.9
9
38
9
4.0
308/310
0.9 33.0
2.0 38.0
9
9
3.0
4.0
38
–
9
–
4.0
–
302/303/304
2.0
4.0
3.5
305
38.0
1.3
9
–
–
–
306/307/308/310
312/313/314/316/318
302
1.3 38.5
0.9 38.0
9
9
3.5
3.0
–
–
–
–
–
–
L
T
4.0 50.0
3.0 48.5
9
9
7.0
4.5
–
–
–
–
–
–
303/304
3.0
4.5
4.0
S
305
306
307
48.5
2.0
9
9
9
–
–
–
–
–
–
–
–
–
2.0 49.0
4.0
2.0
4.0
3.5
49.0
1.3
308/309/310/312/313/314 1.3 49.5
9
9
3.5
3.0
–
–
–
–
–
–
0.9 49.0
316/318/320/322/324
302
303
304
305
6.0 68.5 22
7.5
–
–
–
–
–
–
–
–
–
–
–
–
5S
6.0
4.0
7.5
5.5
68.5 22
4.0 68.5 22
5.5
5.5
4.5
4.0
68.5 22
3.0
306/308
3.0 68.5 22
2.0 67.0 22
4.5
4.0
–
–
–
–
–
–
310/312/316
3.0
4.5
4.0
68.5 22
2.0
–
–
–
–
–
–
314
3.0
4.5
3.5
318/322
68.5 22
1.6
320/324
1.6 69.0 22
1.3 69.5 22
3.5
3.5
–
–
–
–
–
–
330/336/340/344/348
178
www.lemo.com
®
®
Cable stripping lengths for unipole connectors (E series)
straight plugs and sockets with cable collet, clamping type C (solder contacts)
elbow plugs (90°) with cable collet, clamping type C (solder contacts)
Cable stripping lengths (mm)
M1
M3
M1
Solder
S
M3
Solder
S
Type
L
9
T
4
L
T
4
116
1.6
5
20
5
0E
120
130
2.0
3.0
12
13
8
8
5
5
25
25
8
8
5
5
L
1E
2E
3E
4E
5E
T
130
140
3.0
4.0
16
15
9
9
6
6
33
33
9
9
6
6
S
140
160
4.0
6.0
19
20
9
9
7
9
40
40
9
9
7
9
160
112
6.0
23
9
9
50
–
9
–
9
–
12.0 12
15
12
straight plugs and sockets with oversize cable collet, clamping type K (solder contacts)
M2
Cable stripping
lengths (mm)
Type
M2
Solder
S
L
T
5
L
120
130
2.0
3.0
25
8
T
1E
26
8
5
130
140
3.0
4.0
28
27
9
9
6
6
2E
3E
4E
S
140
160
4.0
6.0
36
37
9
9
7
9
160
6.0
50
9
9
www.lemo.com
179
®
®
Cable stripping lengths for multipole connectors (E series)
straight plugs and sockets with cable collet, clamping type C (solder or crimp contacts)
elbow plugs (90°) with cable collet, clamping type C (solder or crimp contacts)
Cable stripping lengths (mm)
M1
M3
M1
M3
Type
Solder
S
Crimp
S
Solder
S
Crimp
S
L
T
L
T
L
T
L
T
302
0.9 9.0
4
3.5
12
5
4.0 19.5
5
3.5 23
5
4.0
0E
303/304
0.7 9.0
4
3.5
12
5
4.0 19.0
5
2.5 23
5
4.0
302
1.3 10.5
0.9 10.5
6
6
3.5
3.0
15
15
8
8
4.0 23.5
4.0 23.0
8
8
3.5 28
3.0 28
8
8
4.0
4.0
1E
2E
3E
4E
303/304
0.9
305
10.5
0.7
6
3.0
15
8
4.0 23.0
8
3.0 28
8
4.0
306
302
0.7 10.5
1.6 14.0
1.3 14.5
6
9
9
3.0
3.5
3.5
15
19
19
8
9
9
4.0 23.5
5.5 32.0
4.0 32.5
8
9
9
3.0 28
3.5 37
3.5 37
8
9
9
4.0
5.5
4.0
303/304/305/306
1.3
3.5
3.0
3.5
307
14.5
0.9
9
19
9
4.0 32.5
4.0 32.0
9
37
9
4.0
3.0
308/310
0.9 14.0
2.0 17.0
9
9
3.0
4.0
19
–
9
–
9
9
3.0 37
9
–
4.0
–
302/303/304
–
–
38.0
38.0
4.0
–
–
2.0
4.0
3.5
4.0
3.5
305
17.0
1.3
9
–
–
9
–
–
306/307/308/310
312/313/314/316/318
302
1.3 17.5
0.9 17.0
9
9
3.5
4.0
–
–
–
–
–
–
38.5
38.0
9
9
3.5
3.0
–
–
–
–
–
–
L
T
4.0 23.0
3.0 21.5
9
9
7.0
4.5
–
–
–
–
–
–
50.0
48.5
9
9
7.0
4.5
–
–
–
–
–
–
303/304
3.0
4.5
4.0
4.5
4.0
S
305
306
307
21.5
2.0
9
9
9
–
–
–
–
–
–
–
–
–
48.5
49.0
49.0
9
9
9
–
–
–
–
–
–
–
–
–
2.0 22.0
4.0
4.0
2.0
4.0
3.5
4.0
3.5
22.0
1.3
308/309/310/312/313/314 1.3 22.5
9
9
3.5
4.0
7.5
–
–
–
–
–
–
–
–
–
49.5
49.0
–
9
9
–
3.5
3.0
–
–
–
–
–
–
–
–
–
–
316/318/320/322/324
0.9 22.0
302
6.0 46.5 15
5E
6.0
7.5
5.5
303
304
305
46.5 15
4.0
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
4.0 46.5 15
5.5
5.5
4.5
4.0
46.5 15
3.0
306/308
3.0 46.5 15
2.0 45.0 15
4.5
4.0
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
310/312/316
3.0
4.5
4.0
45.5 15
2.0
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
314
3.0
4.5
3.5
45.5 15
1.6
318/322
320/324
1.6 47.0 15
1.3 47.5 15
3.5
3.5
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
330/336/340/344/348
180
www.lemo.com
®
®
Cable stripping lengths for multipole connectors (E series)
straight plugs and sockets with cable collet, clamping type C (solder contacts)
elbow plugs (90°) with cable collet, clamping type C (solder contacts)
Cable stripping lengths (mm)
M1
M3
M1
Solder
S
M3
Solder
S
–
–
–
–
–
Type
L
70
T
9.0
L
–
T
–
303
304
6.0
8.0
5.0
3.0
2.0
30
6E
L
70
70
70
70
30 10.0
–
–
–
–
–
–
–
–
T
312
30
30
30
8.0
6.0
7.0
316/320/324
330/332/340/348
S
1.3
5.0
4.0
8.0
70
30
–
–
–
336
360/362
364/372
106
1.6
1.3
0.9
70
70
70
30
30
30
4.5
4.0
4.0
–
–
–
–
–
–
–
–
–
straight plugs and sockets with oversize cable collet, clamping type K (solder or crimp contacts)
M2
Cable stripping lengths (mm)
M2
Type
Solder
S
Crimp
S
L
T
L
T
302
1.3 23.5
8
8
3.5
28
8
8
4.0
1E
303/304
0.9 23.0
3.0
28
4.0
0.9
305
23.0
0.7
8
3.0
28
8
4.0
306
302
0.7 23.5
1.6 26.0
1.3 26.5
8
9
9
3.0
3.5
3.5
28
31
31
8
9
9
4.0
5.5
4.0
2E
3E
4E
303/304/305/306
1.3
3.5
3.0
307
26.5
0.9
9
31
9
4.0
L
T
308/310
0.9 26.0
2.0 34.0
9
9
3.0
4.0
31
–
9
–
4.0
–
302/303/304
2.0
4.0
3.5
305
34.0
1.3
9
–
–
–
S
306/307/308/310
312/313/314/316/318
302
1.3 34.5
0.9 34.0
9
9
3.5
3.0
–
–
–
–
–
–
4.0 50.0
3.0 48.5
9
9
7.0
4.5
–
–
–
–
–
–
303/304
3.0
4.5
4.0
305
306
307
48.5
2.0
9
9
9
–
–
–
–
–
–
–
–
–
2.0 49.0
4.0
2.0
4.0
3.5
49.0
1.3
308/309/310/312/313/314 1.3 49.5
9
9
3.5
3.0
–
–
–
–
–
–
0.9 49.0
316/318/320/322/324
www.lemo.com
181
®
®
Technical characteristics
Outer shell
Brass
Plastic materials
In most cases, LEMO connectors have a brass outer shell
which is suitable for most general purpose applications,
including civilian and military. The brass outer shells have
a chrome nickel-plated surface which ensures very good
protection against industrial atmosphere, salt air and most
corrosive agents.
Some connector model shells can be made of plastic. This
solution offers optimum electrical insulating properties
particularly suitable for medical applications. Black Poly-
oxymethylene (POM) is particularly adapted to products of
the 00 or S series.
Grey or white polysulfone (PSU) and beige PEEK offers
excellent mechanical properties and is suitable for gas or
vapour sterilization.
Alternative protective coatings are available to satisfy other
specific environmental conditions:
– electrolytic nickel
Some models of the 2B and 3B series are available with
an outer shell of cream-coloured polyphenylsulfone (PPSU).
We recommend this material particularly for applications
where products are to withstand hundreds of vapour
sterilization cycles.
– nickel-gold
– nickel-black chrome. After the black chrome treatment,
the part is coated with non conductive protective organic
film.
Bridge plug or plugs with parallel sockets are made of
polyamide (PA.6) available in 9 colours: blue, white, grey,
yellow, brown, black, red, orange and green.
Stainless steel
For applications where there are severe environmental con-
ditions that may rapidly damage the surface finish, we rec-
ommend using stainless steel. The AISI 303 stainless steel
is a material for general use adapted to most applications
requiring a product made entirely of stainless metal.
Some elbow socket shells for printed circuits are overmoulded
in polyphenilene sulfide (PPS).
Other metallic components
For the nuclear industry where elements are subject to
radiation and to vaporous nitric acid, we offer AISI 304
stainless steel.
In general, most metallic components are manufactured in
brass. However, bronze or beryllium copper are used where
good elasticity is required (for example: earthing crown).
Depending on the application, these parts have electrolytic
nickel or nickel-gold plating.
Grade AISI 316L is recommended for medical applications,
highly demanding with regard to non-corrosiveness. This
material is also used for connector shells soldered by
electronic beam onto a device made of the same stainless
steel. These parts have no surface treatment.
These parts can also be manufactured in stainless steel.
Sealing gasket
In general, sealing gaskets are made of silicone rubber
MQ/MVQ. However, for vacuumtight sockets and couplers,
gaskets are made of fluorosilicone rubber (FPM).
Aluminium alloy
The aluminium alloy outer shells find numerous applications
where light weight is a predominant factor; such as in the
aeronautics and space industries, and for portable and
mobile equipment.
Sealing resin
An epoxy resin is used to seal both watertight and vacuumtight
socket and coupler models.
These materials have high mechanical strength and excellent
resistance to corrosion. The shell surface is protected by
anodizing which is available in six colours: blue, yellow,
black, red, green, and natural.
182
www.lemo.com
®
®
Materials and Treatments
Surface treatment (µm)
nickel gold
Cu Ni Cr Cu Ni Cu Ni Au Ni Cr
Component
Material (Standard)
Brass (UNS C 38500)
chrome
black chr. Notes
0.5
3
0.3 0.5
3
0.5
3
0.5
1
2
Stainless steel (AISI 303, 304 or 316L)
Aluminium alloy (AA 6262A or AA 6023)
Aluminium alloy (AA 6262A or AA 6023)
POM (Delrin® or Ertacetal®), Polyoxymethylene, black
PEEK, Polyether ethercetone, beige
PSU (Udel®), Polysulfone, grey or white
PPSU (Radel®), Polyphenylsulfone, cream
PA.6 (Grilon®), Polyamid
PPS (Ryton®), Polyphenilene sulfide, brown
Bronze (UNS C 54400) or special brass
Beryllium Copper (UNS C 17300)
Stainless steel (AISI 416 or 316L)
Special brass
without treatment
1)
–
–
–
–
5
–
–
–
–
–
anodized
2)
3)
4)
4)
5)
6)
7)
8)
9)
Outer shell,
–
–
–
–
–
–
collet nut, conical nut
or notched nut and oversized collet
–
–
–
–
–
–
0.5
0.5
3
3
0.5
0.5
3
3
1.0
1.0
–
–
–
–
Earthing crown
without treatment
0.3 0.5 0.5
without treatment
0.5
3
3
3
0.5
–
–
Latch sleeve
9)
Stainless steel (AISI 416 or 316L)
Bronze (UNS C 52100)
Locking washer
–
–
–
–
–
–
0.5
0.5
3
3
0.5
0.5
3
3
0.5
0.5
–
–
–
–
Brass (UNS C 38500)
10)
10)
Hexagonal or round nut
Stainless steel (AISI 303, 304 or 316L)
Aluminium alloy (AA 6262A or AA 6023)
Brass (UNS C 38500)
without treatment
anodized natural
–
–
–
0.5
3
0.5
3
0.5
–
–
Other metallic components
Stainless steel (AISI 303, 304 or 316L)
Silicone MQ/MVQ or FPM/FKM (Viton®)
Epoxy (Araldite® or Stycast®)
without treatment
11)
O-ring and gaskets
Sealing resin
–
–
Notes: standards for surface treatment are as follows:
– chrome-plated: SAEꢀAMS 2460
– nickel-plated: SAEꢀAMS QQ N 290, or MIL DTL 32119
– gold-plated: ISO 27874
– black chrome: MIL DTL 14538 with a minimum of 10 µm of lacquer protection
1)
anthracite colour (other colours upon request)
2)
for FFP, PCP and ERN models of the 0S to 3S series
3)
for FFP, PCP and ERN models of the 0S to 3S series and FGG and ENG models of the 1B, 3B and 4B series
for the FGY and ENY models of the 2B and 3B series
for bridge plugs of the B series
4)
5)
6)
for S and B series elbow sockets for printed circuits
7)
gold-plating for unipole types
8)
used in 00 series free and fixed sockets and couplers
AISI 416 steel is used with shells made of AISI 303 or 304
delivered with free and fixed sockets with aluminium alloy or stainless steel shell
9)
10)
11)
FPM/FKM (Viton®) o-ring and gaskets are installed upon special request. However standard for vacuumtight models.
www.lemo.com
183
®
®
Technical characteristics of plastic materials
Type
Standard
ASTM D 792
Units
–
POM PEEK
PSU
PPSU
PPS
PA.6 Silicone FPM Epoxy
Density
1.4
1.3-1.4 1.24
1.3
70
91
15
–
1.67
121
179
17
1.14
55
75
35
1015
–
~1.2
> 9
–
~1.9
> 12
–
1.58
16
Tensile strength (at 23°C)
Flexurale strength (at 23°C)
Dielectric strength
ASTM D 638/ ISO R527 MPa
ASTM D 790/ ISO R178 MPA
ASTM D 149/IEC 60243 kV/mm
70-80 92-142
70
–
170
106
24
60
19-25 17-20
1016 5x1016
18-30
1014
–
–
15
Volume resis. at 50% HR and 23°C
Surface resistivity
ASTM D 257/IEC 60093 Ω
l
cm 1015
1016
–
–
1014
–
ASTM D 257
Ω
1013
0.31
1015
0.25
–
–
–
Thermal conductivity
ASTM C 177
IEC 60112
W/K
l
m
0.26
–
0.3
–
–
–
0.8
Comparative tracking index
V
CTI 600 CTI 150 CTI 150
–
CTI 200 CTI 600
–
–
CTI>600
80
Maxi. continuous service temperature UL 746
Min. continuous service temperature UL 746
Max. short-time service temperature
°C
°C
°C
%
Gy1)
–
90
-50
250
-55
140
-60
160
0.3
180
-50
200
0.37
–
220
-60
80
-40
150
> 3
200
-50
> 250
–
200
-20
300
–
-20
–
140
0.85
8x103
HB
300
0.12
107
250
120
0.25
Water absorption in 24h at 23°C
Radiation resistance
ASTM D 570/ISO R62A
< 0.05
–
105
> 107 5x103
105
–
8x104 2x106
Flammability rating
ASTM D 635/UL 94
–
V-0/1.5 V-0/4.4 V-0/1.6 V-0/5V
excel. good excel. excel.
V-2
–
V-0/4
bad
Resistance to steam sterilization
–
bad
bad
good
good
Notes: 1) 1 Gy (Gray) = 100 rad.
ASTM = American Society for Testing Material
ISO = International Standards Organisation
UL
IEC
= Underwriters Laboratories
= International Electrotechnical Commission
184
www.lemo.com
®
®
Mechanical latching characteristics
Standard series
Series
Force
(N)
Fv
Fd
Fa
00 0S 1S 2S 3S 4S 5S 6S
9
14 15 17 20 40 60 70
Fv
Fd
Fa
7
9
10 11 14 25 40 55
120 140 250 350 500 650 750 900
Watertight series
Series
Force
(N)
Fv
Fd
Fa
0E 1E 2E 3E 4E 5E 6E
14 16 20 32 65 85 100
9
10 13 25 40 60 75
250 300 400 550 700 800 900
Keyed series
Series
Force
(N)
Fv
Fd
Fa
00 0B 1B 2B 3B 4B 5B
9
10 14 15 17 39 48
7
8
11 12 14 38 38
F : average latching force.
v
100 180 300 300 400 600 800
F : average unmating force with axial pull on
d
the outer shell.
Keyed watertight series
F : average pull force with axial pull on the collet nut
a
Series
Force
(N)
Fv
Fd
Fa
TT 0K 0T 1K 1T 2K 2T 3K 3T 4K 5K
14 14 15 16 16 20 20 32 28 65 85
Notes: forces were measured on outer shells not fitted with contacts.
Mechanical endurance: 5000 cycles (3000 cycles for T series).
The values were measured according to the standard IEC 60512-7 test 13a.
12
9
13 10 14 13 15 25 24 40 60
80 250 130 300 250 400 250 550 400 700 800
1N = 0.102 kg.
Electromagnetic compatibility (EMC)
and shielding efficiency
(dBOhm)
5
(dB)
30
The electromagnetic compatibility of a device can only be
ensured by meeting a number of basic rules with the design
of the device and by carefully selecting components, cables
and connectors.
0
40
50
-5
-10
-15
-20
-25
-30
-35
60
Electrical and electronic devices are to be designed to ensure
the following:
70
a) reduce the emission of generated electromagnetic
disturbance to a level where radios and telecommunication
and other devices can properly function;
80
90
b) electromagnetic immunity against electromagnetic
disturbance so that they can properly function.
100
110
When selecting a connector, screen or shielding efficiency
and low resistance to electric continuity between the cable
and the connector should be considered.
(Hz)
Frequency
FGG + PHG.1K
The design of LEMO connectors with metal shell and earth-
ing crown guarantee optimum shielding efficiency in all
applications where electromagnetic compatibility (EMC) is
critical. The performance of a connector is measured through
shielding efficiency, a value that represents the ratio between
the electromagnetic field on the outside and the inside of
the shell. Our measurements are carried out according to
the IEC 60169-1-3 standard.
FGG + PHG.1B
The performance of S and B series connectors is compa-
rable to the results of measurements carried out on a pair
of FGG + PHG.1B connectors.
The performance of E and K series connectors is compa-
rable to the results of measurements carried out on a pair
of FGG + PHG.1K connectors.
www.lemo.com
185
®
®
Values with earthing crown and latch sleeve or inner-sleeve nickel-
plated.
Shell electrical continuity:
R1
R2
(measured according to IEC 60512-2 test 2f)
Values with gold-plated earthing crown and nickel-plated latch sleeve
or inner sleeve.
Test current: 1A
A
= Ammeter
mV = Millivoltmeter
= Generator
G
Standard series
R1
R2
R1
R2
Series
Series
(mΩ) (mΩ)
(mΩ) (mΩ)
00
0S
1S
2S
3.5
2.8
2.2
1.8
2.8
1.6
1.5
1.2
3S
4S
5S
6S
1.6
1.4
1.4
1.0
1.2
1.0
1.0
0.5
mV
A
G
Keyed series
R1
R2
R1
Series
Series
(mΩ) (mΩ)
(mΩ)
00
0B
1B
XB
2B
3B
4B
5B
3.5
3.5
2.5
2.5
2.2
2.2
1.5
1.5
2.8
1.3
1.1
1.1
0.9
0.7
0.5
0.3
TT
0T
1T
2T
3T
4T
5T
3.5
3.5
2.5
2.2
2.2
1.5
1.5
mV
A
G
Watertight series
Keyed watertight series
R1
R2
Series
(mΩ) (mΩ)
0E-0K
1E-1K
2E-2K
3E-3K
4E-4K
5E-5K
6E
2.8
2.2
1.8
1.6
1.4
1.4
1.0
1.6
1.5
1.2
1.2
1.0
1.0
0.5
mV
A
G
186
www.lemo.com
®
®
Insulator
Plastic material used by LEMO for manufacturing insulators
is selected according to the electric and thermal properties
required for the various connector types.
Radiation resistance
PA 6.6
Characteristics examined for the two connector types are:
Dielectric strength, Comparative tracking index,
Surface and volume resistivity, Radiation resistance,
Continuous service temperature, Water absorption,
Flammability rating, Resistance to hydrocarbon.
PEEK
PTFE
FEP
PI
Mechanical and Electrical Properties
Mechanical characteristics of thermoplastics, such as PA
6.6, and PEEK, are improved by the addition of glass fibres.
By adding glass fibres in the resin the performance of this
material (mechanical strength and radiation resistance) is
enhanced and water absorption rate is reduced. From an
electric point of view, the addition of glass fibres improves
dielectric strength.
3
1
4
2
5
3
6
4
7
5
8
6
9
7
10
rads
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
8
Gray (Gy) 10
Radiation dose γ
Damage
Minimum to slight (almost available usable)
Slight to medium (often satisfactory)
Medium to serious (not usable)
Selection of the insulator
Note: technical data in this chapter provide general information on plastics
used by LEMO as electrical insulators. LEMO reserves the right to pro-
pose new materials with better technical characteristics, and to withdraw,
without notice, any material mentioned in the present catalogue or any
other publications edited by LEMO S.A. and/or its subsidiaries. LEMO SA
and its subsidiaries use only plastic granules, powder or bars supplied by
specialized companies, and thus cannot in any case take responsibility
with regard to this material.
A number of thermoplastics have common characteristics,
some of them are identical with other insulating materials.
In this case, the insulator material is selected according to
the specific difference in features to provide all the required
parameters for the given type.
Technical characteristics
Type
Standard
Units
PA6.6
PEEK
PTFE
FEP
PI
Dielectric strength
ASTM D 149 / IEC 60243
ASTM D 257 / IEC 60093
ASTM D 257 / IEC 60093
ASTM C 177
kV/mm
15-17
5.8x1015
1012
19-25
1016
1015
0.25
17.2-24
1018
20
> 1016
> 1016
0.24
–
22
> 1016
> 1015
0.35
–
Volume resistivity at 50% RH and 23°C
Surface resistivity
Ω l cm
Ω
1017
Thermal conductivity
W/K
l
m
0.21
0.23
Comparative tracking index
Dielectric constant (106 Hz)
Dissipation factor (106 Hz)
IEC 60112
V
CTI 600 CTI 150 CTI 500
ASTM D 150 / IEC 60250
ASTM D 150 / IEC 60250
UL 746
–
–
4
–
3.2-3.5
2-2.1
2.1
3.6
< 0.005 < 0.0003 < 0.001 < 0.0034
Maximum continuous service temperature
Maximum short-time service temperature
Minimum continuous service temperature
Water absorption in 24h at 23°C
Radiation resistance
°C
°C
°C
%
Gy
–
120
150
–
250
300
260
300
200
260
350
480
–
–
–
-55
-200
< 0.01
2x102
V-0
-200
< 0.01
2x104
V-0
ASTM D 570 / ISO R624
–
< 0.7
5x103
–
< 0.3
107
0.24
106
–
Flammability rating
ASTM D 635 / UL 94
V-0/1.5
Unipole
Multipole
Designation
Symbol
PA 6.6
Standard
00
chemical
commercial
Nylatron®
S
E
00
S
E
B
K
T
Polyamide (glass fitted)
–
l
l
Polyether Ethercetone
Polytetrafluorethylene
Tetrafluorethylene
Polyimide
Peek®
PEEK
PTFE
FEP
PIꢀ
–
l
l
lꢀ lꢀ lꢀ lꢀ lꢀ lꢀ lꢀ
lꢀ
l
–
–
ASTM D 1457-83
ASTM D 2116-81
–
l
lꢀ lꢀ
lꢀ lꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Vespel®
Note: values of insulation resistance between contacts are given on page 189.
lꢀ First choice alternative
lꢀSpecial order alternative
www.lemo.com
187
®
®
Electrical contact
Technical description
The secure reliable electromechanical connection achieved
with LEMO female cylindrical contacts is mainly due to
two important design features :
1. Prod proof entry on the mating side which ensures
perfect concentric mating even with carelessly handled
connectors.
2. The pressure spring, with good elasticity, maintains a
constant even force on the male contact when mated.
The leading edge of the pressure spring preserves the
surface treatment (gold-plated) and prevents undue
wear.
Contact material and treatment
LEMO female contacts are made of bronze beryllium (QQ-
C-530) or bronze (UNS C 54400). These materials are chosen
because of their high modulus of elasticity, their excellent
electrical conductivity and a high mechanical strength.
LEMO male solder and print contacts are made of brass
(UNS C 38500). Male crimp contacts are made of brass
(UNS C 34500) or annealed brass (UNS C 38500) with
optimum hardness (HV) for crimping onto the wire.
Surf. treatment (µm)
Type
Male crimp
Material (standard)
Cu
0.5
0.5
0.5
Ni
3
Au1)
1.0
1.0
1.0
Au
Ni
Cu
Brass (UNS C 34500)
Brass (UNS C 38500)
Brass (UNS C 38500)
3
Male print
3
Bronze
or brass
Bronze (UNS C 54400)
Cu-Be (FS QQ-C-530)
Female crimp / print
0.5
3
1.5
Notes: the standard surface treatment are as follows:
– nickel: SAE AMS QQ N 290 or MIL DTL 32119
– gold: ISO 27874.
Cu-Be (FS QQ-C-530)
Stainless steel
–
–
–
–
–
–
1) minimum value
Clips
2) for elbow print contacts
3) treatment completed by 6 µm Sn (lead free) tin-plating
Connection wire2)
Brass
–
33)
–
Thickness comparison between the outside and the inside of female contacts
Gold thickness
Gold thickness
female
Contact
ø A
Contact
female
ø A
male
(µm)
male
(µm)
outside
inside
outside
inside
(mm)
(mm)
P
P
(µm)
1.5
1.5
1.5
1.5
1.5
1.5
1.5
(%)
(µm)
(%)
2.5
2.5
0.35
0.50
0.70
0.90
1.30
1.60
2.00
1.0
1.0
1.0
1.0
1.0
1.0
1.0
65
65
70
75
75
75
75
3.00
4.00
1.0
1.0
1.0
1.0
1.0
–
1.5
1.5
1.5
1.5
1.5
–
75
75
75
75
75
–
5.00
6.00
8.00
12.001)
Note: P = inspection point
Notes: 1) contacts are silver plated
188
www.lemo.com
®
®
Contact resistance with relation to the number
of mating cyles
Insulation resistance between the contacts
and contact/shell
(measured according to IEC 60512-2 test 3a)
(measured according to IEC 60512-2 test 2a)
Average values measured after the mating cycles and
the salt spray test according to IEC 60512-6 test 11f.
Multipole
PEEK
Unipole
PTFE
Contact resistance (mΩ)
Contact resistance (mΩ)
Insulating material
new
after humidity test1)
A ø
A ø
1000
3000
5000
1000
3000
5000
(mm)
(mm)
cycles
cycles cycles
cycles
cycles cycles
> 1012
> 1010
Ω
> 1012
> 1010
Ω
0.35
0.5
0.7
0.9
1.3
1.6
2.0
8.0
7.5
5.6
4.1
2.8
2.9
2.6
–
–
3.0
4.0
2.0
1.6
1.4
1.2
0.8
0.7
2.2
2.0
–
3.1
2.8
–
Ω
Ω
8.3
5.7
4.2
2.9
3.1
2.7
8.7
6.1
4.8
3.6
3.5
3.3
Note: 1) 21 days at 95% RH according to IEC 60068-2-3.
5.0
6.0
–
–
8.0
–
–
12.0
–
–
Solder contacts
The conductor bucket of these contacts is machined at an
angle to form a cup into which the solder can flow.
See page 8 for the range of cable dimensions that can be
soldered.
Crimp contacts
Advantages of crimping
The square form crimp method is used (MIL-C-22520F,
– practical, quick contact fixing outside the insulator
class I, type 2) photo 1 for unipole contacts.
– possible use at high temperature
– no risk of heating the insulator during the conductor-
contact fixing
For multipole contacts the standard four identer crimp
method is used, MIL-C-22520F, class I, type 1), photo 2.
The crimp method requires a controlled compression to
obtain a symmetrical deformation of the conductor strand
and of the contact material. The radial hole in the side of
the contact makes it possible to check whether the conductor
is correctly positioned within the contact. A good crimping
is characterized by only slightly reduced conductor section
and practically no gap.
– high tensile strength
Crimp contacts are available in standard version (form 1)
for mounting maximum size conductors.
For some dimensions, these crimp contacts can be produced
with reduced crimp barrels (form 2) for mounting reduced
size conductors.
For optimum crimping of bronze or brass contacts they are
annealed to relieve internal stress and reduce material
hardening during the crimping process.
1
2
3
Only the crimping zone is annealed with the help of an
induction heating machine designed by the LEMO Research
and Development Department (see photo 3).
Crimp contacts
The crimp contacts can be with two forms: a standard crimp
barrel for large conductors (see fig. 1) or with a reduced
crimp barrel for smaller conductors (see fig. 2).
The range of cable dimensions that can be crimped into
our contacts are indicated on the table on page 8.
Fig. 1
Fig. 2
www.lemo.com
189
®
®
Print contacts
Print contacts are available in straight or elbow versions
for certain connector types, mostly for straight and elbow
socket models. Connection is made on flexible or rigid
printed circuits by soldering.
Straight print contacts are gold-plated which guarantees
optimum soldering, even after long-term storage. However
for wave soldering, we recommend removal the gold-plat-
ing from the contact end on the printed circuit side before
soldering according to the assembly procedures.
Print elbow contacts include a tinned lead free brass wire
crimped into a crimp contact.
straight
elbow
Test voltage
Test voltage (Ue) :
Voltage values are given in the table on insulator types for
each series.
(measured according to the IEC 60512-2 test 4a standard)
They correspond with values measured at sea level. They
are adapted to all applications up to an altitude of 2000 m.
It corresponds to 75% of the mean breakdown voltage.
Test voltage is applied at 500 V/s and the test duration is
1 minute.
In case a device is used at a higher altitude, air clearance
between live parts has to be multiplied by the following
coefficients.
It means also that test voltage has to be divided by this
coefficient.
This test has been carried out with a mated plug and socket,
with power supply only on the plug end.
The operating voltage value definition is at the entire
responsibility of the customer who defines this value
according to the safety factors that they apply to their
equipment and system.
altitude (m)
coefficient
Caution:
For a number of applications, safety requirements for
electrical appliances are more severe with regard to
operating voltage.
2000
3000
4000
5000
1.00
1.14
1.29
1.48
In such cases operating voltage is defined according
to creepage distance and air clearance) between live parts.
Please consult us for the choice of a connector by indi-
cating the safety standard to be met by the product.
Rated current
(measured according to IEC 60512-3 test 5a)
For connectors with PEEK insulator, maximum admissible
current will follow the curve below depending on the oper-
ating temperature T.
The specified rated current can be applied simultaneously
to all the contacts.
It corresponds with an average temperature rise of 40°C
of the connector.
Rated current (A)
The current values are indicated in the table of insulator
types in each series.
For use at higher temperatures acceptable rated current will
be lower. It tends towards zero as the material is used at the
maximum operating temperature accepted for the insulator.
100%
75%
50%
25%
In most case the current depend on the conductor dimension
(see table on page 196) or on the printed circuit dimension.
Caution:
In general, connectors should not be unmated while live.
T (°C)
0
50
100
150
200
250
190
www.lemo.com
®
®
Cable fixing
Cables are fixed into LEMO connectors with cable collet systems. These collets with latches have a design which is very
similar to those used for tool machines. This solution guarantees excellent cable retention and ensures perfectly symmetrical
deformation of the cable.
The 00 multipole series is also available with hexagonal crimping (MIL-C-22520F).
Material and treatment
Surface treatment (µm)
Material (standard)
Nickel1)
Gold
Ni
Component
Cu
Ni
3
Cu
–
Au
–
Center piece
Brass (UNS C 38500)
Brass (UNS C 38500)
0.5
0.5
–
–
3
–
–
–
–
Collet
3
3
3
3
3
3
–
0.5
–
–
0.5
–
Crimp ferrule
Reducer
Copper (UNS C 18700) 0.5
Brass (UNS C 38500)
Brass (UNS C 38500)
Brass (UNS C 38500)
Brass (UNS C 38500)
0.5
0.5
0.5
0.5
Reducing cone
Earthing cone
Metal washer
–
–
–
–
–
–
N1)otes:
Silicone MQ/MVQ
FPM (Viton®)2)
–
–
standards for surface treatment are as follows:
Gasket
– nickel-plated: SAE AMS QQ N 290.
2)
available upon special request.
Cable clamping system
B series (D and M cable clamping)
See assembly instructions under www.lemo.com.
6
7
5
Plug and socket
¿ collet nut
Type D
¡ reducing cone
¬ collet
3
1
√ reducer
ƒ split insert carriers
≈ insulator + contacts
∆ housing subassy.
7
6
5
1
4
3
2
Elbow plug
¿ collet nut
¡ reducing cone
¬ collet
Type M
√ reducer
9
8
ƒ elbow outlet
≈ insert carrier
∆ insulator + contacts
« housing subassy.
» hex cap
7
5
6
www.lemo.com
191
®
®
K series (C and K cable clamping)
See assembly instructions under www.lemo.com.
7
6
Plug and socket
¿ collet nut
5
¡ collet
¬ flexible gasket
√ earthing cone
ƒ split insert carriers
≈ insulator + contacts
∆ housing subassy.
1
7
6
Type C
3
4
2
Elbow plug
¿ collet nut
1
¡ collet
¬ flexible gasket
√ earthing cone
ƒ split insert carrier
≈ elbow inner shell
∆ insulator + contacts
« hex cap
5
9
7
8
6
» housing subassy.
1
Plug and socket
¿ collet nut
Type K
5
7
¡ collet
6
4
3
2
¬ flexible gasket
√ earthing cone
ƒ split centre-pieces
≈ insulator + contacts
∆ housing subassy.
w. oversized back
1
T series (C cable clamping)
See assembly instructions under www.lemo.com.
6
7
5
1
Type C
3
Plug and socket
¿ collet nut
4
2
¡ collet
¬ flexible gasket
√ earthing cone
ƒ split insert carriers
≈ insulator + contacts
∆ housing subassy.
1
7
6
5
192
www.lemo.com
®
®
S series (C, L and K cable clamping)
See assembly instructions under www.lemo.com.
1
3
2
5
6
Plug and socket
¿ collet nut
Type K
1
7
¡ collet
¬ oversize collet
housing (type K)
√ earthing
6
G G
F
2
centre-piece (type C)
ƒ split centre-pieces
(type K and C)
1
Type L*
6
7
≈ insulator + contacts
∆ housing subassy.
4
1
2
6
Type C
Elbow plug
G G
P
5
¿ collet nut
¡ collet
6
√ threaded sleeve
ƒ bracket
7
5
4
≈ insulator + contacts
∆ insulating sleeve
« housing subassy.
6
8
* «L» type collet does not allow to connect the screen to
the connector shell. It does not allow full EMC shielding.
FLA
E series (C and K cable clamping)
See assembly instructions under www.lemo.com.
Plug and socket
¿ collet nut
7
1
Type K
¡ collet
8
¬ flexible gasket
√ earthing cone
ƒ split centre-pieces
(type K)
4
3
2
6
5
7
1
ƒ earthing
centre-piece (type C)
≈ oversize collet
housing (type K)
≈ earthing
5
6
7
7
8
9
centre-piece (type C)
∆ insulator + contacts
« housing subassy.
1
1
Type C
4
3
2
Elbow plug
¿ collet nut
5
¡ collet
7
8
6
¬ flexible gasket
√ earthing cone
ƒ split insert carrier
≈ elbow inner shell
∆ insulator + contacts
« hex cap
FLA
» housing subassy.
www.lemo.com
193
®
®
Maximum metal collet nut tightening torque
Standard series
Watertight series
Series
Series
0E 1E 2E 3E 4E 5E 6E
0.7 0.8 12
00 0S 1S 2S 3S 4S 5S 6S
Torque (Nm)
Torque (Nm)
0.25 0.5 1.5 2.5
3
8
10 12
2
3
5
8
Keyed series
Watertight keyed series
Series
Series
TT 0K 0T 1K 1T 2K 2T 3K 3T 4K 5K
0.25 0.7 0.7 0.8 0.8
00 0B 1B XB 2B 3B 4B 5B
Torque (Nm)
Torque (Nm)
0.25 0.5 1.5 2.0 2.5
4
7
10
2
2
3
3
5
8
Maximum elbow plug hex cap tightening torque
Keyed series
Watertight series
Series
0E 1E 2E 3E 4E 5E
0.8 1.2 1.5
Series
00 0B 1B 2B 3B 4B 5B
Torque (Nm)
1
3
5
Torque (Nm)
0.2 0.25 0.5 0.5 1.5
3
5
Watertight keyed series
Series
0K 1K 2K 3K 4K 5K
0.8 1.2 1.5
Torque (Nm)
1
3
5
1N = 0.102 kg
1)
Maximum plastic collet nut tightening torque
Series
Note:
1)
00 0S 1S 2S 3S 1B 2B 3B 4B
0.15 0.45 0.50 0.50 1.00 0.50 0.50 1.00 1.50
For applications subject to strong vibration, we recommend fixing the collet nut
with epoxy resin. We recommend to tight to the maximum value. Optimal torque
may depend on cable jacket design.
Torque (Nm)
194
www.lemo.com
®
®
Technical tables
Table of American Wire Gauge
Construction
Strand AWG/
ø wire max
Wire section
Construction
Strand AWG/
ø wire max
Wire section
AWG
AWG
(mm)
(in)
(mm2)
(sq in)
(mm)
(in)
(mm2)
(sq in)
nb
259
817
259
133
133
168
133
105
37
1
strand
24
30
26
25
27
30
29
30
26
10
28
25
20
12
30
27
22
14
34
30
29
24
16
36
34
30
30
26
18
nb
42
19
10
7
strand
36
32
30
28
20
34
30
22
40
36
32
24
38
34
26
40
36
28
38
30
40
32
34
36
38
40
0
11.277
9.702
0.444
0.382
0.35
52.90
0.0820
0.0641
0.0514
0.0335
0.0211
0.0132
0.0133
0.0082
0.0073
0.0082
0.0046
0.0048
0.0056
0.0051
0.0032
0.0030
0.0035
0.0032
0.0020
0.0020
0.0019
0.0022
0.0020
0.0013
0.0013
0.0015
0.0013
0.0014
0.0013
20 1)
20
20
20
20
22
22
22
24 1)
24
24
24
26
26
26
28 1)
28
28
30
30
32
32
34
36
38
40
1.0160
1.0414
1.0160
0.9906
0.8382
0.8382
0.7874
0.6604
0.6604
0.6858
0.6350
0.5588
0.5588
0.5080
0.4318
0.4318
0.4064
0.3302
0.3302
0.2794
0.2794
0.2286
0.1693
0.127
0.04
0.5320
0.6162
0.5067
0.5631
0.5189
0.3821
0.3547
0.3243
0.2045
0.2407
0.2270
0.2047
0.1540
0.1408
0.1281
0.0925
0.0887
0.0804
0.0568
0.0507
0.0341
0.0324
0.0201
0.0127
0.0081
0.0049
8.2x10-4
0.0010
1
41.40
0.041
0.04
2
8.89
33.20
7.9x10-4
8.7x10-4
8.0x10-4
5.9x10-4
5.5x10-4
5.0x10-4
3.2x10-4
3.7x10-4
3.5x10-4
3.2x10-4
2.4x10-4
2.2x10-4
2.0x10-4
1.4x10-4
1.4x10-4
1.2x10-4
8.8x10-5
7.9x10-5
5.3x10-5
5.0x10-5
3.1x10-5
2.0x10-5
1.3x10-5
7.5x10-6
4
6.9596
5.5118
4.4450
4.3942
3.3020
2.9210
2.6162
2.3114
2.3622
2.5400
2.0828
2.0574
1.8542
2.0828
1.6510
1.5748
1.5748
1.4986
1.5494
1.3208
1.2700
1.2700
1.3208
1.2954
1.2700
1.0414
0.274
0.217
0.175
0.173
0.13
21.5925
13.5885
8.5127
8.6053
5.3204
4.7397
5.2614
2.9765
3.0847
3.6321
3.3081
2.0775
1.9413
2.2704
2.0820
1.3072
1.3174
1.2293
1.4330
1.3076
0.8234
0.8447
0.9627
0.8107
0.8967
0.8229
0.039
0.033
0.033
0.031
0.026
0.026
0.027
0.025
0.022
0.022
0.02
6
1
8
19
7
8
10
10
10
12
12
12 1)
12
14
14
14 1)
14
16 1)
16
16
16 1)
16
18 1)
18 1)
18
18
18
18
1
0.115
0.103
0.091
0.093
0.10
42
19
7
37
19
7
1
19
7
1
0.082
0.081
0.073
0.082
0.065
0.062
0.062
0.059
0.061
0.052
0.05
41
19
7
1
0.017
0.017
0.016
0.013
0.013
0.011
0.011
0.009
0.007
0.005
0.004
0.003
19
7
1
1
65
26
19
7
7
1
7
1
1
1
65
42
19
16
7
1
0.05
1
0.1016
0.078
0.052
0.051
0.05
1
Note: 1) not included in the standard
1
0.041
www.lemo.com
195
®
®
Table of wire gauges according to IEC-60228 standard
Conductor no
x Ø (mm)
Conductor no
x Ø (mm)
Max Ø
(mm)
Max Ø
(in)
Section
(mm2)
Section
(sq in)
Max Ø
(mm)
Max Ø
(in)
Section
(mm2)
Section
(sq in)
196x0.40
7x2.14
125x0.40
7x1.72
1x4.50
80x0.40
7x1.38
1x3.60
84x0.30
7x1.50
1x2.76
56x0.30
7x0.86
1x2.25
50x0.25
7x0.68
1x1.78
30x0.25
7x0.52
7.50
6.10
6.00
4.90
4.50
4.70
3.95
3.60
3.70
3.15
2.76
2.80
2.58
2.25
2.15
2.04
1.78
1.60
1.56
0.295
0.240
0.236
0.192
0.177
0.155
0.155
0.141
0.145
0.124
0.108
0.110
0.098
0.082
0.084
0.080
0.070
0.062
0.061
25.00
25.00
16.00
16.00
16.00
10.00
10.00
10.00
6.00
0.0387
0.0387
0.0248
0.0248
0.0248
0.0155
0.0155
0.0155
0.0093
0.0093
0.0093
0.0062
0.0062
0.0062
0.0038
0.0038
0.0038
0.0023
0.0023
1x1.40
32x0.20
7x0.43
1.40
1.35
1.29
1.15
1.20
1.15
1.00
0.95
0.90
0.80
0.75
0.60
0.75
0.65
0.50
0.40
0.40
0.40
0.055
0.053
0.050
0.045
0.047
0.045
0.039
0.037
0.035
0.031
0.029
0.023
0.029
0.023
0.019
0.015
0.015
0.015
1.50
1.00
1.00
1.00
0.75
0.75
0.75
0.50
0.50
0.50
0.34
0.28
0.25
0.22
0.14
0.11
0.09
0.09
0.0023
0.0015
0.0015
1x1.15
0.0015
42x0.15
28x0.20
1x1.00
0.0011
0.0011
0.0011
28x0.15
16x0.20
1x0.80
7.7x10-4
7.7x10-4
7.7x10-4
5.2x10-4
4.3x10-4
3.8x10-4
3.4x10-4
2.1x10-4
1.7x10-4
1.3x10-4
1.3x10-4
6.00
6.00
7x0.25
4.00
1x0.60
4.00
14x0.15
7x0.20
4.00
2.50
18x0.10
14x0.10
21x0.07
14x0.10
2.50
2.50
1.50
1.50
Maximum current rating for conductor
Maximum current on insulated conductors up to an ambiant temperature of 30° C (from VDE 0100, parts 430 and 532 as
well as other VDE regulations).
Nominal
section
mm2
Group 2
Intens.
max. A
Group 3
Intens.
max. A
0.08
0.14
0.25
0.34
0.50
0.75
1.00
1.50
2.50
1.0
2.0
1.5
3.0
4.0
5.0
6.0
8.0
9.0
12.0
15.0
19.0
24.0
32.0
12.0
15.0
18.0
26.0
Group 2 Multi-conductor, e. g. solid cable under sheath, shielded cable, lead-sheath cables, …
Group 3 Single conductor and single conductor cable laid on open air in a way to leave at least a
space between them equal to their diameter
196
www.lemo.com
®
®
Some formulae
l
l
Resistance R of a conductor: R = ρ
[Ω]
Where: ρ = conductor resistivity
l = conductor length
A
A = conductor cross-section
138
D
l
Impedance of coaxial line:
Z =
log [Ω]
d
ε = dielectric constant
r
√ε
r
D = dielectric outer diameter
d = center conductor outer diameter
U1
l
Signal attenuation: Attenuation = 20 log
[dB]
U = input signal voltage
U12 = output signal voltage
U2
Conversion of some units:
millimeters into inches:
1 mm = 0.0394 in
inches into millimeters:
1 in = 25.4 mm
1 cm = 0.0328 ft
1 ft = 30.48 cm
centimeters into feet:
feet (12 in) into centimeters:
square centimeters into square inches:
square inches into square centimeters:
bar into pounds per square inch:
bar into Pascal:
2
1 cm = 0.155 sq in
2
1 sq in = 6.4516 cm
1 bar = 14.51 psi
5
1 bar = 10 Pa
l
°C into °F:
°F = °C 1.8 + 32
l
l
newtonmeter (Nm) into inch pound (in lb)
1 Nm = 8.85 in lb
-1
-1
-1
-1
l
l
l
l
l
l
l
l
mbar l s into Torr l s
1 mbar l s = 1.33 Torr l s
www.lemo.com
197
®
®
Product safety notice
PLEASE READ AND FOLLOW ALL INSTUCTIONS CAREFULLY AND CONSULT ALL RELEVENT NATIONAL AND
INTERNATIONAL SAFETY REGULATIONS FOR YOUR APPLICATION.
IMPROPER HANDLING, CABLE ASSEMBLY, OR WRONG USE OF CONNECTORS CAN RESULT IN HAZARDOUS
SITUATIONS.
1. SHOCK AND FIRE HAZARD
Incorrect wiring, the use of damaged components, presence of foreign objects (such as metal debris), and / or residue
(such as cleaning fluids), can result in short circuits, overheating, and / or risk of electric shock.
Mated components should never be disconnected while live as this may result in an exposed electric arc and local
overheating, resulting in possible damage to components.
2. HANDLING
Connectors and their components should be visually inspected for damage prior to installation and assembly. Suspect
components should be rejected or returned to the factory for verification.
Connector assembly and installation should only be carried out by properly trained personnel. Proper tools must be used
during installation and / or assembly in order to obtain safe and reliable performance.
3. USE
Connectors with exposed contacts should never be live (or on the current supply side of a circuit). Under general
conditions voltages above 30 VAC and 42 VDC are considered hazardous and proper measures should be taken to
eliminate all risk of transmission of such voltages to any exposed metal part of the connector.
4. TEST AND OPERATING VOLTAGES
The maximum admissible operating voltage depends upon the national or international standards in force for the
application in question. Air and creepage distances impact the operating voltage; reference values are indicated in the
catalog however these may be influenced by PC board design and / or wiring harnesses.
The test voltage indicated in the catalog is 75% of the mean breakdown voltage; the test is applied at 500 V/s and the
test duration is 1 minute.
5. CE MARKING
CE marking
means that the appliance or equipment bearing it complies with the protection requirements of one or
several European safety directives.
CE marking
applies to complete products or equipment, but not to electromechanical components, such as
connectors.
6. PRODUCT IMPROVEMENTS
The LEMO Group reserves the right to modify and improve to our products or specifications without providing prior
notification.
7.
WARNING (Prop 65 State of California)
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that
cause cancer, birth defects or other reproductive harm. LEMO products are exempt from proposition 65 warnings because
they are manufactured, marketed, and sold solely for commercial and industrial use. For further information, please visit
https://www.lemo.com/quality/LEMO-Prop-65-compliance-declaration.pdf.
198
www.lemo.com
®
®
Disclaimers
LEMO works constantly to improve the quality of its products; the information and illustrations figuring in this document
may therefore vary and are not binding. In any case, LEMO makes no specific warranty of merchantability, fitness for a
particular purpose, third party components as such or included in assembly, non-infringement, title, accuracy, completeness,
or security. The user is fully responsible for his products and applications using LEMO component.
In no event shall LEMO, its affiliates, officers, agents or employees be liable for any incidental, indirect, special or
consequential damages in connection with the products or services provided by LEMO, including (without limitation) loss
of profits or revenues, interruption of business, loss of use of the products or any associated equipment, materials,
components or products, damages to associated equipment or in combination with other components, materials.
Reproduction of significant portions of LEMO information in LEMO data books or data sheets is permissible only if
reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices.
LEMO is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
www.lemo.com
199
®
®
Notes
200
www.lemo.com
LEMO complete product range
3K.
93C
2G
2C
B
S
K
T
E
F
00 01 0A 3T 4A 4M
1D
Y
05 5G
L
H
M
R
N
03
V
W
T7
P
SP
D
K/S 01 DIN
Unipole
Multipole
•
•
•
•
•
•
•
Coaxial 50 Ω
Coaxial 75 Ω
Multi Coaxial
Mixed Coax + LV
Triaxial 50 Ω
Triaxial 75 Ω
Mixed Triax + LV
Quadrax
High Voltage
Multi High Voltage
Mixed HV + LV
Fibre Optic
Multi Fibre Optic
Mixed FO + LV
Thermocouple
Fluidic
Multi Fluidic
Mixed Fluidic + LV
included in this catalogue
Most frequently used in darker colour
•
B Series Keyed
S Series
K Series Keyed
T Series
E Series
F Series Keyed
00 Series
01 Series
0A Series
3T Series
4A Series
4M Series Keyed
3K.93C Series Keyed
L Series Keyed
W Series Keyed
VAA Series
1D Series
H Series
Y Series
05 Series
5G Series Keyed
2G Series Keyed
03 Series Keyed
REDEL D Series
2C Series
M Series Keyed
R Series Keyed
N Series Keyed
V Series
Cable assembly
REDEL T7 Series
REDEL P Series Keyed REDEL SP Series Keyed
01 Series Keyed
TAA Series
No reproduction or use without express permission of editorial or pictorial content, in any manner.
LEMO SA reserves the right to modify and improve specifications, at all times, without any notification.
LEMO HEADQUARTERS
SWITZERLAND
LEMO SA
Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 Ecublens
Tel. +41 21 695 16 00 - e-mail: info@lemo.com
LEMO SUBSIDIARIES
AUSTRIA
NETHERLANDS / BELGIUM
LEMO Connectors Nederland B.V.
Jacques Meuwissenweg 6
2031 AD Haarlem
LEMO Elektronik GesmbH
Lemböckgasse 49/E6-3
1230 Wien
Tel: +43 1 914 23 20 0
Fax:+43 1 914 23 20 11
salesAT@lemo.com
Tel. +31 23 206 07 01
info-nl@lemo.com
NORWAY / ICELAND
LEMO Norway A/S
Soerumsandvegen 69,
1920 Soerumsand
Tel: +47 22 91 70 40
Fax: +47 22 91 70 41
info-no@lemo.com
BRAZIL
LEMO Latin America Ltda
Av. Dr. Adhemar de Barros,
566 – Sala 1407, Vila Adyana
CEP: 12245-011
São José dos Campos - SP - Brazil
Tel: +55 11 94242 4293
info-la@lemo.com
SINGAPORE
LEMO Asia Pte Ltd
4 Leng Kee Road,
#06-09 SiS Building
Singapore 159088
Tel: +65 6476 0672
Fax: +65 6474 0672
sg.sales@lemo.com
CANADA
LEMO Canada Inc
44 East Beaver Creek Road, unit 20
Richmond Hill, Ontario L4B 1G8
Tel: +1 905 889 56 78
Fax: +1 905 889 49 70
info-canada@lemo.com
SPAIN / PORTUGAL
IBERLEMO SAU
Brasil, 45, 08402 Granollers
Barcelona
Tel: +34 93 860 44 20
Fax: +34 93 879 10 77
info-es@lemo.com
CHINA / HONG KONG
LEMO Electronics (Shanghai) Co., Ltd
First Floor, Block E,
18 Jindian Road, Pudong
Shanghai, China, 201206
Tel: +86 21 5899 7721
Fax: +86 21 5899 7727
cn.sales@lemo.com
SWEDEN / FINLAND
LEMO Nordic AB
Gunnebogatan 30, Box 8201
163 08 Spånga
Tel: +46 8 635 60 60
Fax: +46 8 635 60 61
info-se@lemo.com
DENMARK
LEMO Denmark A/S
Mandal Allé 16A
5500 Middelfart
Tel: +45 45 20 44 00
Fax: +45 45 20 44 01
info-dk@lemo.com
SWITZERLAND
LEMO Verkauf AG
Grundstrasse 22 B,
6343 Rotkreuz
FRANCE
LEMO France Sàrl
24/28 Avenue Graham Bell
Bâtiment Balthus 4
Tel: +41 41 790 49 40
ch.sales@lemo.com
Bussy Saint Georges
77607 Marne la Vallée Cedex 3
Tel: +33 1 60 94 60 94
Fax: +33 1 60 94 60 90
info-fr@lemo.com
TAIWAN
TAOYUAN TAIWAN
Tel: +886 967 132 824
speng@lemo.com
UNITED ARAB EMIRATES
LEMO Middle East Connectors LLC
Concorde Tower 6th Floor,
Dubai Media City, P.O. Box 126732
Dubai, United Arab Emirates
Tel: +971 55 222 36 77
GERMANY
LEMO Elektronik GmbH
Hanns-Schwindt-Str. 6
81829 München
Tel: +49 89 42 77 03
Fax: +49 89 420 21 92
info@lemo.de
info-me@lemo.com
UNITED KINGDOM
HUNGARY
LEMO UK Ltd
REDEL Elektronika Kft
Nagysándor József u. 6-12
1201 Budapest
12-20 North Street, Worthing,
West Sussex, BN11 1DU
Tel: +44 1903 23 45 43
lemouk@lemo.com
Tel: +36 1 421 47 10
Fax: +36 1 421 47 57
info-hu@lemo.com
USA
LEMO USA Inc
ITALY
P.O. Box 2408
LEMO Italia srl
Rohnert Park, CA 94927-2408
Tel: +1 707 578 88 11
+1 800 444 53 66
Fax: +1 707 578 08 69
info-US@lemo.com
Viale Lunigiana 25
20125 Milano
Tel: +39 02 66 71 10 46
Fax: +39 02 37 90 80 46
sales.it@lemo.com
JAPAN
LEMO Japan Ltd
2-7-22, Mita,
Minato-ku, Tokyo, 108-0073
Tel: +81 3 54 46 55 10
Fax: +81 3 54 46 55 11
info-jp@lemo.com
LEMO DISTRIBUTORS
ARGENTINA, AUSTRALIA, BRAZIL, CHILE, COLOMBIA, CZECH REPUBLIC,
GREECE, INDIA, ISRAEL, NEW ZEALAND, PERU, POLAND, RUSSIA,
SOUTH AFRICA, SOUTH KOREA, TURKEY, UKRAINE
www.lemo.com
相关型号:
©2020 ICPDF网 联系我们和版权申明